Government - Datcom Inc

Transcript

Defense Civilian State & Local Government: Mission Critical Assurance. When your network means everything. 2 A trusted U.S. government partner for over 25 years, Transition Networks builds on strong agency relationships to provide customized, energy efficient, optical solutions aimed at securing communications while assuring increased return on investment from critical network assets. Transition Networks’ Difference Transition Networks is a U.S. based industry leader with over 25 years experience designing fiber integration products which affordably deliver the security and reliability today’s government networks can trust. With unparalleled experience serving the unique needs of our government customers, world-class 24/7 support, and a product Lifetime Warranty, Transition Networks is the choice for reliable, costeffective fiber integration for government agencies. Defense, Civilian and State & Local government agencies all require networking solutions that will meet security requirements, improve network performance and reduce operational expenses, but each agency has special needs as well. From Fiber-to-the-Desk applications for Civilian networks to outdoor security and surveillance applications for Defense networks to Intelligent Transportation applications for State & Local governments, Transition Networks offers the ability to affordably integrate the benefits of fiber optics into any data network – in any application – in any environment. Defense Civilian State & Local U.S. National government agencies operating defense networks need reliability and security to execute a wide range of strategic mission needs. When execution means everything, Transition Networks is your trusted partner, providing secure and reliable optical solutions. U.S. National government agencies operating civilian networks carry highly sensitive data that can affect public safety and civilian privacy, which must be protected. Transition Networks is committed to providing the most secure optical solutions, ensuring that sensitive information is only seen by its intended audience. Our Nation’s State & Local government agencies serve a wide variety of public needs including healthcare, public safety, education, municipally owned utilities and transportation networks. Transition Networks is a trusted partner that understands the unique networking needs of each local government sector, providing optical networking solutions fit for any environment and budget. Challenge Today’s High Security Enterprise, Military, Government Agency and Municipal networks are tasked with finding cost-effective, secure network solutions to improve their network’s performance. Defense, Civilian and State & Local Government agencies have become more net-dependent and protecting information is a primary concern, but finding cost-effective solutions to meet the strict security and performance criteria continues to be a challenge. Looking to fiber optics can eliminate TEMPEST security and wire tapping concerns, while increasing performance, bandwidth and durability of your network, but often comes with a high price tag. Consolidation efforts in the public sector have put strains on network bandwidth and performance and distance limitations of copper are inhibiting agencies from operating efficiently. Budget restraints, however, prohibit building the new fiber infrastructure needed to meet security and performance demands. When current infrastructure isn’t meeting the demands of today’s high security networks, government agencies are turning to cost-effective fiber integration solutions to provide the increased security and network performance they need. At Transition Networks we strive to help our customers identify products to solve today’s problems while future-proofing for tomorrow as well. Our consultative approach enables us to better understand your unique requirements and provide customized solutions to fit your needs. We understand that government agencies need a partner they can trust with mission critical applications. When execution means everything, Transition Networks is here to help your network. • Transition Networks Advantages • Trusted government partner for over 25 years • U.S. based company • Turnkey solutions for a variety of applications • Experts in fiber integration • Strong understanding of our government customer’s challenges and applications • Financially stable company founded in 1987 • Outstanding customer and technical support 24 x 7 x 365 • ISO 9001 and 14001 certified • Unsurpassed Lifetime Warranty on Transition Networks products • Available on GSA Advantage, SEWP, NET CENTS, CHESS and more… • JITC certification • TAA Compliant • Dedicated Federal sales team Applications: Fiber-to-the-Desk (FTTD) Data Center Consolidation Fiber Extension 3 5 Fiber Conservation – WDM Telecommunications Video Security & Access Control Intelligent Transportation • Product Families 7 9 11 13 3 4 Fiber to the Desk (FTTD) Mission: Fiber Enable IP Phones and Desktop Workstations New FTTD Deployments VoIP Deployments Fiber NIC cards by Transition Networks allow for a simple integration path wherever fiber is available at the desktop. With our line of Fast Ethernet and Gigabit Ethernet NICs – users will gain the benefits associated with deploying fiber optic cabling within the LAN environment, including expanded bandwidth capacity and increased data security. Transition also offers PCI-Express (PCIe) adapter network interface cards to maximize bandwidth and bus efficiency while lowering power consumption on desktops, as well as, ExpressCard and PCMCIA adapter cards for delivering fiber optic connectivity to any laptop. Many municipal and military agencies are using fiber optics at the desk (FTTD) to increase network speed and efficiency, while simultaneously reducing the risk of security breaches due to emissions given off over copper cabling. Transition Networks offers a wide range of copper-to-fiber conversion solutions, network interface cards (NICs) and switches for integrating fiber optic cabling with copper ports on network equipment in FTTD and Voice over IP (VoIP) deployments. • Available for Fast Ethernet and Gigabit Ethernet • Includes both standard and low profile mounting brackets • Options for supporting PCI, PCIX, PCIe, PCMCIA, and ExpressCard • Supports Wake-on-LAN (WoL) • Supports PXE Remote Boot • Software drivers available to many common operating systems, includes Microsoft certified drivers FTTD Deployments in Legacy Network Infrastructure Extend the life cycle of the network equipment you already have by delivering low cost, fiber optic connectivity directly to your desktop without having to replace your existing legacy copper NIC card. PCI powered media converters from Transition Networks are designed to install directly inside a workstation or file server and mount into any standard PCI slot. No hardware configuration or software driver installation is required. Since only power is drawn from the PCI slot, no additional CPU resources are being utilized. • No need to replace existing NICs • Draws power directly from PCI slot; no power supply needed • AutoCross, Link Pass Through, Auto-Negotiation, FarEnd-Fault, Automatic Link Restoration and Pause • Easily installed inside a PC or file server; no configuration required • More secure than a desktop media converter and less time consuming than installing a new NIC A common challenge for FTTD deployments is that typical IP phones and workstations are only equipped with RJ-45 copper connections. Additionally, if there is a link loss in a VoIP environment, IP phones lose connectivity to the Call Manager® and need to be rebooted. Transition Networks’ Gigabit VoIP Media Converters allow network managers to fiber enable IP phones and desktops over the same gigabit backbone, reduce power consumption using Power-over-Ethernet (PoE), and connect their workstation via fiber. Equipped with Power Sourcing Equipment Link Pass Through (PSE/LPT), Transition Networks VoIP media converters will automatically reboot IP phones if there is a loss of link – saving government agencies money on services while ensuring 99.999% uptime for their critical applications. • 10/100 or 10/100/1000 versions available • IEEE 802.3af and 802.3at Power-overEthernet is supported • 48VDC PSE Output Voltage • Power device restart after link loss • Over-Current Protection and under-current detection • Minimum load sensing Network Connectivity Network managers can eliminate bandwidth bottlenecks at aggregation points within their network by utilizing fiber switches. Transition Networks offers flexible, cost effective distribution switches that support 100/1000Mbps fiber as well as 10/100/1000Base-T copper connections for high performance fiber access and workgroup backbone applications. Transition Networks also offers SFPs and XFPs that allow for a single piece of network equipment to be connected to a multitude of interfaces, protocols, and transmission media via the SFP/XFP port. Small form factor pluggables offer a cost effective and flexible means to accommodate for network modifications and fiber integration while utilizing existing network devices. • Jumbo Frames up to 9KB • QoS • TACACS+ and SSH/ SSL • Spanning Tree • IGMP and DHCP Snooping • SNMP V1, V2c, V3 • Hot Swappable SFP Footprint • Class 1 Laser International Safety • Standard IEC60825 Compliant • Compatible with SFP Multi-Sourcing Agreement (MSA) 5 6 Fiber Extension for Data Center Consolidation Fiber Extends Beyond 100m+ BWDM: Bi-DIRECTIONAL WAVE DIVISION MULTIPLEXING T1/E1 SONET OCx FAST ETHERNET GIGABIT ETHERNET 10G ETHERNET Copper Limitation 100m CWDM: COARSE WAVE DIVISION MULTIPLEXING Mission: Implement the Benefits of Fiber with Increased ROI Copper to Fiber Conversion Mission: Increase Distance Limitations with Fiber Integration in the Data Center Data Center Consolidation Mission: Increase Capacity on Existing Fiber Optic Infrastructure Fiber Conservation The demands on today’s government networks are perpetually on the rise. Whether adding new users or new capabilities, network performance requirements often out-pace current cabling infrastructure. With virtually unlimited bandwidth support, fiber optic cabling can alleviate the expense of cabling plant upgrades that come with the adoption of new technologies, by providing a more future-proof solution. Fiber offers additional benefits over copper including, the ability to transmit greater distances and isolate data from sources of noise and interference, while providing increased security benefits. Under the Federal Data Center Consolidation Initiative, an immense savings of tax payer dollars is expected by consolidating under-performing data centers and optimizing those in Federal inventory. Due to the consolidation, the optimized data center locations may grow in size beyond the distance supported by copper cabling. Adding Transition Networks’ Copper to Fiber media conversion products into your Data Center allows government agencies to maintain a Physical Layer, Transparent, Pass-through connection. The use of media conversion gives government agencies the reassurance that the data is NOT passing through a switched network, guaranteeing no added latency, no jitter, no packet inspections and no potential traffic sniffing. User’s of today’s voice, video, and data networks are becoming more complex – requiring more bandwidth and faster transmission rates over ever increasing distances. To meet these demands, network managers are relying more on fiber optics, but the reality faced by many government entities is that laying more fiber is no longer an economical or feasible option once current fiber infrastructure is exhausted. In order to increase capacity on existing fiber infrastructure, many groups are turning to Wave Division Multiplexing (WDM) technologies. However, fiber integration is not as simple as replacing cabling and can incur high costs of replacing copper interfacing equipment with more expensive fiber equivalents. To reduce the expense of integrating fiber optics, Transition Networks’ media converters, supporting network speeds up to 10Gbps, can be used to establish links between new fiber cabling and existing copper based network devices by allowing users to connect fiber to their current RJ-45 based switches, routers, and NICs. Even new fiber interfacing devices may not support the fiber type or transmission distance needed for a particular application, requiring the use of Transition Networks’ media converters to interface between different cabling technologies. • Central chassis for remote management and fault detection • Configure via dip switches or management module • Plug-n-Play installation • AutoCross • Automatic Link Restoration • Networking protocols up to 10Gbps Whether security devices are stored in leased, owned, co-located or stand-alone facilities, Transition Networks’ copper to fiber media conversion products can extend the distance limitations of copper cabling without replacing existing infrastructure. Transition Networks’ media conversion technology allows government agencies to consolidate data center locations securely and efficiently, further contributing to the ROI and cost saving goals of the Federal Data Center Consolidation Initiative. • Configure via dip switches or management module Transparently pass customer traffic including VLANs Alarms and traps for quick fault detection Plug-n-Play installation • AutoCross™ • Automatic Link Restoration Transition Networks’ bi-directional wave division multiplexing (BWDM) products offer great cost savings by allowing network managers to double the capacity of existing fiber routes, with little to no changes to the general network design. Coarse wavelength division multiplexing (CWDM) products by Transition Networks multiplex multiple optical signals on a single fiber optic strand by using different wavelengths of laser light to carry the different signals, offering a multiplication effect of up to 16 times the capacity of existing fiber infrastructure. Transition Networks’ WDM products allow for scaling of your project to fit your exact needs easily and affordably. • Realize multiplication of up to 16 times current fiber infrastructure • Inexpensive • Requires little to no changes to network design • Multiple protocols supported 7 8 Telecommunications Mission: Migrate To An All Packet-Based Network for Mission Critical Applications Carrier Ethernet Central Office Network Operations Center EVC UNI ITU-T Y.1731 IEEE 802.1ag UNI ITU-T Y.1731 IEEE 802.1ag IEEE 802.3ah IEEE 802.3ah METRO (Ethernet / IP / MPLS) S3280 Office Transition Networks understands that Business class Ethernet services require reliable, scalable and flexible architectures that offer significant bandwidth and cost savings without sacrificing control or traffic characteristic information. The ability to add additional Ethernet services and applications while growing the number of users on a network must be completely transparent, all while guaranteeing increased reliability and uptime. Transition Networks’ extensive portfolio of business class Ethernet products are designed for critical government applications, providing the very latest in IP/ Ethernet and TDM convergence products. S3280 School Hospital PacketBand-TDM Remote Office PacketBand-TDM T1/E1 T1/E1 Remote Monitoring PBX PBX TD M ov er IP er M IP TD ov ve No Headquarters PacketBand-ISDN ISD (Ethernet / IP / MPLS) ISD No ve r IP Remote Office PacketBand-ISDN PRI BRI PBX • IEEE 802.3ah/802.1ag and ITU Y.1731 • VLAN with Q-in-Q • IPv4 and IPv6; SNMP v1, v2c, v3 • Multi-CoS • Extended Operating Temperature • SSL/SSH, RADIUS, TACSAS+ and ACL • Management VLAN • Multi-standard TDM pseudowire support • 10/100/1000Base RJ45 Interfaces; 100/1000 SFP Interfaces • Highly accurate and stable clock recovery • Rate limiting • G.704 grooming • G.823 Synchronization levels • Supports 802.1p CoS prioritization • 802.1Q VLAN including Q-in-Q Mission: Reduce costs with shared ISDN solutions Implementing shared ISDN can provide government agencies with significant cost-savings, allowing unused circuits to be switched off and making better use of the circuits purchased. Providing better value and better service to its constituents is a consideration for many government agencies and shared ISDN services can provide exactly that. Transition Networks Liberator-ISDN products are feature-rich, highly flexible and easy to use, allowing government agencies to customize their networks to nearly any ISDN PRI and/or BRI connectivity, conversion or routing application. ISDN Switching ISDN NETWORK ISDN NETWORK PRI Video Conferencing • IEEE 1588v2 PBX ISDN Switching BRI Government agencies continue to use TDM/ISDN networks for specific applications including the Public Switched Networks (PSN) for voice traffic, but are aggressively looking to reduce operational and management costs by merging all traffic (voice, video, data) to an all IP Ethernet infrastructure. Transition Networks provides a secure and economical path forward to cost effectively migrate all TDM /ISDN traffic to IP/Ethernet using carrier-class technology offered by our Packetband TDM/ISDN products. PacketBand products exceed the performance requirements for the T1/ E1 services, in order to be used reliably in place of circuits. Knowing that all networks are not designed the same; PacketBand is tunable to accommodate any IP network including MPLS and Ethernet. Designed and proven for transporting highly-accurate clocked TDM/ISDN circuits over packet switch networks, these products provide an evolutionary path for bridging the gap between TDM/ISDN and packet based networks. METRO r IP • ITU G.8031/G.8032 Mission: Cost-Effectively Bridging the Gap To An All Packet-Based Network for Mission Critical Applications Circuit Emulation Services (CES) Headquarters Business class Ethernet has become the choice for Government and high security Enterprise networks as industry standards have evolved to include stringent high-availability network requirements. Government agencies are quickly migrating to an all packet-based network for transparent WAN/LAN, VPLS, VOIP, Video Conferencing and other mission critical applications. ISDN NETWORK BRI BRI Router BRI PRIs PRIs PRI PBX Router PBX PRIs Router Transition Networks understands that while cost is a factor, security cannot be compromised. Knowing that security is of the utmost importance, the Liberator-S has also been designed to work with BRENT phone encryptors, enabling BRENTs to use more reliable PRI services that can be delivered over fiber to improve security. The Liberator-S was designed to simplify BRENT installations and to provide a more cost effective, reliable and manageable solution for applications where multiple BRENTs are required, for secure video conferencing for example. With thousands installed in hundreds of varied applications, Transition Networks is committed to providing the right products based on your specific needs. • Flexible PRI/BRI ISDN switch • Converts between PRI and BRI • Connects to ISDN networks and/or local ISDN devices • Shares ISDN access between multiple local devices • Full cross-connection between any/ all ‘B’ channels • BRI Power Feed options • Least Cost Routing • Dynamic re-directing of calls if destinations unavailable • Local connectivity between all ports • Supports E1/T1 PRI and leased lines 9 10 Physical Security, Outdoor Surveillance and Access Control Mission: To Extend the Surveillance and Access Control Network from the Core to the Most Remote Node From theft prevention, to law enforcement, to protecting intellectual property, the demand for security and surveillance networks have increased dramatically over the past decade. Not only have the number of government security networks increased, but so have those networks’ geographic size. For these networks to continue increasing their area of surveillance, fiber optic cable is being introduced into the equation to overcome the distance limitations of copper-based networks and offer network architects more design options. Fiber Backbone FIBER POWER & DATA Outdoor Cameras SGPAT1013-100 SPOEB1013-100 SPOEB1013-100 SGPOE1013-100 SM8TAT2DPA SISPM1040-182D-LRT Access Card Scanner PTZ Camera Motion Detection Access Control Card Reader Indoor Camera WAP (Wireless Access Point) Biometric Reader / Keypad Physical Security Outdoor Surveillance Access Control Along with the general proliferation of fiber into security-based networks, there has also been a changing of the guard with network cameras as analog cameras are being replaced by IP network cameras. Not only does the IP camera offer the ability to be checked remotely from anywhere, but most IP cameras also support Power-over-Ethernet (PoE) technology. PoE makes the installation of cameras, access controls, and other powered devices easier, since the piece of equipment can be powered over the same UTP cable being used to transmit the data signal. Transition Networks’ PoE switches, PoE media converters, and PoE injectors create the functional network needed in today’s diverse physical security and surveillance applications.. Transition Networks offers a wide selection of PoE and PoE Plus media converters and switches for deploying IP cameras in non-temperature controlled environments. Our line of hardened industrial gear and its extended operating temperature range is ideal for situations in which a remote camera needs to be placed in an enclosure along a highway or in a parking area. In addition to a robust, extended operating range – Transition Networks’ industrial rated converters and switches offer the ability for fiber integration, which is so important to outdoor surveillance networks, due to restrictions and limitations of a UTP or coax cable infrastructure. Access control has advanced beyond gates, locked doors, and serial communications to include IP-based technology, such as, keypads, biometrics, smart cards, and radio frequency over Ethernet networks. Advanced access control systems offer unprecedented security, but also transmit complex, precise information that requires additional management control. Traditional rapid serial interfaces and terminal blocks can’t accommodate the bandwidth requirements or the extended distances that are required for the comprehensive access control systems of the future – making the integration of fiber optics and an Ethernet protocol a necessity. Transition Networks offer a range of PoE devices fit for the latest proliferation of access control networks. • IEEE802.3af Power-over-Ethernet compatible • Over-Current Protection and under-current detection • Operating Temperature Range of -40°C to 75°C • Over-Current Protection and under-current detection • IEEE802.3af Power-over-Ethernet compatible • Power device restart after link loss • 48VDC PSE Output Voltage • Add PoE functionality on a port-by-port basis • IEEE802.3at Power-over-Ethernet Plus compatible • Minimum load sensing • IEEE802.3af Power-over-Ethernet compatible • Minimum load sensing • 48VDC PSE Output Voltage • Add PoE functionality on a port-by-port basis • IEEE802.3at Power-over-Ethernet Plus compatible • Add PoE functionality on a port-by-port basis • 48VDC PSE Output Voltage Indoor Camera 11 Intelligent Transportation Systems (ITS) 12 Mission: Provide Fast, Efficient, Robust Communications in Critical Applications Due to its scalability, reliability, and cost advantages - Ethernet is rapidly being deployed as an effective technology across a wide spectrum of transportation applications. Whether in trains, buses, ships or traffic control systems each application requires fast, efficient and robust operations in order to meet the performance expectations of that particular network. Communications uptime is of the utmost importance to ensure that the safety and security of passengers and equipment are maintained. With an unparalleled product offering, backed by the only lifetime warranty of its kind, Transition Networks’ products support a wide range of mission critical transportation applications. Redundant Fiber Ring Managed Industrial Switches with POE+ (SISPM1040-xxx-LRT) Fiber Optic Connection M/E-PSW-FX-02 or SISTG SISGM Product Line Eastbound Fiber Westbound Fiber PLC Traffic Lights Infrared/Ultrasonic Sensor Inductive Loop Sensor Video Surveillance Network Digital Signage and Traffic Notification Traffic Control Signaling and Vehicle Detection Within Intelligent Transportation Systems, video surveillance equipment is being utilized for monitoring, but not the same monitoring function of say camera enclosures along the peripheral of an office building or parking ramp. The cameras within the traffic control system are utilized to monitor the flow of traffic and to identify any accidents or traffic congestion on the road, versus traditional surveillance/property-protection applications that commonly use IP cameras for intrusion detection and security. Due to the massive geographic area that these surveillance networks cover, the harsh environment, and the mission-critical function that they deliver, fiber optics and hardened industrialized equipment have become the choice for robust transportation systems. The use of digital signage to notify drivers of accidents, emergencies, and commute times has become quite widespread throughout Intelligent Traffic Systems. The ability to communicate with motorists in a concise and efficient manner improves commute times, and allows drivers to avoid accident scenes. Digital signage is really an extension of the traffic control signaling and vehicle detection network -operating over the same mission-critical communication network and fiber-optic infrastructure to help disseminate relevant driver information and protect motorist safety. Traffic signal control systems are utilized to coordinate the various individual traffic signals that, when linked together, help make up an entire Intelligent Transportation System (ITS). These systems consist of traffic control signals at intersections, partnered with ground detection loops or other means of detecting vehicles at an intersection, a robust communications network to link all of the intersection controllers together, and lastly a means to remotely manage and troubleshoot the entire traffic signal control system from a central location. Transition Networks’ hardened product portfolio is used to integrate the robust communications network and remote management system, which is based on an Ethernet protocol and runs across a fiber optic infrastructure. • Rugged hardware performance for harsh environments and outdoor enclosures where PoE Plus is needed • Highly flexible for a variety of PoE Plus applications, like surveillance cameras and wireless access points • Offers advanced Ethernet management, power and network redundancy, and network security features • Extended operating temperature of -40° C to 75°C • Tiny mechanical size • AutoCross and Auto-negotiation • RJ-45 and SFP 1000Base-X slots for extending Ethernet via daisy-chain • Multiple fiber optic interfaces to support ring architectures • Full management features including support for redundant rings, VLANs, QoS, etc. • Supports both IPv4 and IPv6 13 14 Product Overview TDM/ISDN over IP PacketBand-TDM | PacketBand-ISDN Industrial Switches SISGM1040-2xx-LRT | SISTG10xx-2xx-LRT • Multi-standard TDM pseudowire support: CESoPSN, SATOP, TDM over IP • Multiple fiber optic interfaces to support ring architectures • Highly accurate and stable clock recovery • Full management features including support for redundant rings, VLANs, QoS, etc. • G.823 Synchronization levels • Supports both IPv4 and IPv6 • Remote management • Extended Operating Temperature • Redundant, hot-swappable power supplies ISDN Switching Liberator S • BRI power feed options • Rugged hardware performance for harsh environments and outdoor enclosures where PoE Plus is needed • Converts between PRI and BRI • Least Cost Routing • Highly flexible for a variety of PoE Plus applications, like surveillance cameras and wireless access points • Connects to ISDN networks and/or local ISDN devices • Dynamic re-directing of calls if destinations unavailable • Offers advanced Ethernet management, redundancy, availability and network security features • Shares ISDN access between multiple local devices • Local connectivity between any ports • Supports E1/T1 PRI and leased lines Ethernet NIDS S3280 | S3230 PoE Switches MIL-SM8TXAF2GPA | MIL-SM24TAF4GPA • Ethernet OAM support including IEEE 802.3ah, IEEE 802.1ag, and ITU Y.1731 • Extended operating temperature range • IEEE802.3af Power-over-Ethernet compatible • IEEE 802.1p Quality of Service (QoS) • Triple power inputs for redundancy and uptime • IEEE802.3at Power-over-Ethernet Plus compatible • Advanced timing IEEE 1588v2 and SyncE • 48VDC PSE Output Voltage • Sub 50ms Ring Protection: ITU G.8032/8031, STP, RSTP, MSTP • Over-Current Protection and under-current detection • MEF CE 1.0 (9, 14 and 21) and MEF CE 2.0 certified • Add PoE functionality on a port-by-port basis • IEEE 802.1Q VLANs including C-Tag / S-Tag • Advanced security features: SSL, SSH, Multilayer Access Control Lists (ACL), RADIUS, TACACS+ and Management VLANs CWDM-xxxxxxxxR | CWDM Accessories: X2, XFP, SFP+, SFP • Minimum load sensing Fiber Switches MIL-SM8DPA | SM24DPA • Realize multiplication up to 16 times current fiber infrastructure • Jumbo Frames up to 9KB • Requires little to no changes to network design • QoS • Multiple protocols and network speeds supported • TACACS+ and SSH/SSL • Completely passive solution • Spanning Tree • Layer-One connectivity and plug-and-play provisioning • IGMP and DHCP Snooping • Modular design allows for pay-as-you-grow expansion • SNMP V1, V2c, V3 PoE Media Converters Media Conversion SISPM1040-xxx-LRT | SISTP10xx-xxx-LRT • Flexible PRI/BRI switch • Full cross-connection between “B” channels CWDM Industrial PoE Switches SGPOE10xx-1xx | SGPAT10xx-1xx | SPOEB10xx-1xx Fiber NICs N-FX-xx-03 | N-GxX-xx-02 | N-FXE-xx-02 | N-GXE-xx-02 • 10/100 or 10/100/1000 versions available • Available for Fast Ethernet and Gigabit Ethernet • IEEE802.3af Power-over-Ethernet compatible • Includes both standard and low profile mounting brackets • 48VDC PSE Output Voltage • Options for supporting PCI, PCIX, PCIe, PCMCIA and ExpressCard • Power device restart after link loss • Supports Wake-on-LAN (WoL) • Over-Current Protection and under-current detection • Supports PXE Remote Boot • Minimum load sensing • Software drivers available to many common operating systems, includes Microsoft certified drivers ION219-A | IONMM | E-100BTX-FX-05 | C3110 | x2220 | x3230 SFPs X2 | XFP | SFP+ | SFP • Central chassis for remote management and fault detection • Hot-swappable SFP Footprint • Configure via dip switches or management module • Class 1 Laser International Safety • Plug-n-Play installation • Standard IEC-60825 Compliant • AutoCross • Compatible with SFP Multi-Sourcing Agreement (MSA) • Automatic Link Restoration Transition Networks Headquarters 10900 Red Circle Drive Minnetonka, MN 55343 USA US Federal Sales Team tel: 952-941-7600 toll free: 800-526-9267 fax: 952-941-2322 State & Local / Education Sales Team [email protected] [email protected] www.transition.com www.mytnconnection.com http://www.transition.com/Government Part Number 900125 Technical information in this document is subject to change without notice. tel: 800-815-2589 email: [email protected] tel: 952-996-1527 toll free: 800-526-9267 email: [email protected]