Transcript
Sirius Corp
GPRS Data Logger [built in GPS]
GS902
GPS Data & Measurement Logging
2 x Analog Channels + 1 x Pulse Channel + 4 x Digital Channels + 2 x Relay Outputs
Upload Data & GPS information via GPRS and SMS on schedule or alarm triggered
Programmable data logging and upload interval
Temperature Sensor channel [GS902S]
Alert user when temperature is high/low
Overview ♦
Both I/O Data & GPS data tracking via GPRS / SMS
♦
Data logging in internal memory
♦
GPRS Real Time Data & Historical Data Upload
♦
Real Time Alert on GPS Features
♦
Real Time Alert on triggered alarm input and analog levels
♦
Panic Button triggered GPS data report via GPRS & SMS
♦
Integrated 16 bit MCU & Quad‐band GSM/GPRS Module
GPRS Data Logger [built in GPS]
~ Data Logging Function
Data Logger Features ∗
2 High Precision A/D Channels
∗
4 DI [Digital Input] or 1 DP [Digital Pulse] Channels
∗
2 DO [Digital Output] Channels
∗
Optional 1 Temperature Sensor [‐50 ~ 125°C], programmable high/low alert temperature level
∗
Programmable data capturing type, range, start point, alert high/low and pulse level
∗
Device configuration setup by PC software via USB port
∗
Device parameters checked via SMS or PC software
∗
Programmable Data Upload Interval (5 seconds ~ 24 hours)
∗
Programmable Data Logging Interval (1 min ~ 60 min)
∗
Remote Configuration by SMS or GPRS
∗
USB Port for PC communication
∗
Support Dynamic Domain Name or Fixed IP
∗
Support TCP protocol data transmission
∗
1MB Non‐volatile Memory maintaining max. 30 days period of data
Channel Specification Analog Input:
4 ~ 20mA
Pulse Input:
Accumulated 99999999 pulses
Input Impedance:
250Ω [current type input]
5~15VDC input
Accuracy:
12bit AD Converter
Pulse Frequency Measure > 20ms
2.5/ 4096=0.00061 (0.061%)
Max. 50 pulses per second
Digital On/Off Input : Optic coupler dry contact
Triggered Level > 20ms
Digital Output:
max. DC24V @3A, AC120V @3A
GPRS Data Logger [built in GPS]
~ GPS Function
GPS Overview ▪
High precision in location (within 3 meters) and speed (meter per minute)
▪
Logging interval and Upload interval are independent and user programmable
▪
Support international standard NMEA interfacing with other GPS Navigation or Tracking System
▪
Support Google Earth
▪
Server/Client Application Software allows global application with regional services
Alarm Detection 1. Over speed alert
Automatically send alerts when driving speed exceeds user defined speed
2. Position Lock
Automatically send alerts when the vehicle is moved apart from its parking position 3. Fencing In (min. 0.18m), multiple points Alert (SMS/Dial/GPRS) when moving into security zone 4. Fencing Out (min. 0.18m), multiple points Alert (SMS/Dial/GPRS) when moving out of security zone
5. Panic Button
Emergency report with position information for both personal and vehicle alarm
6. Idle time monitoring
An early warning security feature when vehicle is idle longer than predefined period
7. Alarm Dry Contact
External alarm detecting devices e.g. shock detector, triggered air bag
8. Analog Input High or Low Alarm, & Pulse Input
External sensor devices e.g. temperature transducer alerts user with GPS data
Sample Application Tracking: It keeps users (max. 4 mobile phone & 1 centre) notified of GPS data via both GSM SMS and GPRS network in an user‐ defined interval Automatic Alarm Report: Not only alarm is reported by dialing, control centre is informed of the accident location via both GSM SMS and GPRS network instantly. Position Lock: User activates the “Position Lock” on leaving the car in the car park. When the car is moved out of its position, it will alert user and send the GPS data via both GSM SMS and GPRS network instantly.
GPRS Data Logger [built in GPS]
~ data upload
How to get the live and logged data? Internet:
Using PC to receive GPS data via Internet
GSM SMS: Using mobile phone or GSM modem to receive GPS data via SMS USB port: Using devices with USB port to retrieve GPS data via USB cable What information is inside the data packet? ♦
Device ID number
♦
Date Time stamp
♦
Power Voltage Level
♦
GPS data
♦
Speed, Location, Heading Degree
♦
GPS alarm status
♦
Digital Alarm Status
♦
Measured Analog values
♦
Measured Accumulated Pulse value When will GS902 upload data? (c) Alarm Triggered
(a) On Schedule ♦
Data is uploaded every interval via SMS or GPRS
♦
Digital Alarm Input
♦
User Programmable upload interval
♦
Panic Button
♦
Data records within the interval will be uploaded in packet
♦
Low Input Voltage Level Alert
♦
Analog Input Alert High/Low
e.g. Temperature is too high/low
(b) Manual Check ♦
Query by user mobile phone SMS
♦
Command from Server via SMS or GPRS
♦
Command via USB by PC software
Oil tank level is too low
(c) GPS Alarm ♦
Fence In, Fence Out
♦
Position Lock
♦
Idle Time
♦
Over Speed
Applications Fire Vehicles Central Management
Fleet Management of Cold Food Truck
♦
Tracking fire vehicle water tank level
♦
Tracking temperature levels
♦
Tracking fire vehicle position
♦
Tracking truck position
♦
Alert on low water tank level
♦
Alert on high/low temperature
GPRS Data Logger [built in GPS]
~ specification
Specification Operating Temp: ‐30˚C ~ +70˚C Standby Temp:
‐50˚C ~ +80˚C
Power Input:
DC 9 ~ 24V (recommended DC12V)
Rating:
55mA @12VDC, max. 0.2W
Enclosure:
Aluminum Case
Dimension:
100 x 60 x 18 mm
Weight:
92 g
Optional Recharge Time:
2 hours Full Charge
Battery Backup:
15~20 hours
GPRS & GSM GPS Chip:
GSTAR GS‐89
GPS Band:
1575.42 MHz
GSM/GPRS Module GS902B, GS902S, GS902P
GPRS/GSM Chip: Quad Band
∗
Siemens MC55i
GPS Standard:
∗
850/900/1800/1900 MHz
∗
[fixed IP & domain name]
+NMEA protocol
GPS Antenna:
External
GPS Accuracy:
3~5 meters
Response Time:
max. < 120s, the least < 20s
Internal Memory: 1MB
Start Up Time:
Power Up: 20~45s
Standby Mode Wakeup: 15~25s
Normal Mode Resume: 5~8s
Accessories * GPS Antenna * GSM Antenna, * USB Cable * Power Connector * Microphone Connector * I/O Connectors (vehicle installation type)
GPRS Data Logger [built in GPS]
~ select model
Model Selection
GS902B
GS902P
GS902S
Aluminum
Aluminum
Aluminum
Alarm Input
4
3
4
Panic Button
1
1
1
Pulse Input
0
1
0
Relay Output
2
2
2
High Precision AD Channels
2
2
1
1MB
1MB
1MB
Enclosure Low Voltage Alert Power Input: DC 9~24V
Internal Memory Temperature Sensors Data Capturing Interval
—
1 x Submersible [‐55~125 °C] 2 seconds
Data Logging Interval
Programmable (1 ~ 60 minutes)
Data Upload Interval
Programmable (5 seconds ~ 24 hours)
IP Connection Protocol Data Transmission Data Upload PC Communication Port Internal Data Record
Dynamic / Fixed TCP GSM SMS / GPRS Data / USB On Schedule / Manual Request / Alarm Triggered / GPS Alarm USB Average 30 days (1MB)
Local Setup via USB by PC Software
ü
Remote Configuration via SMS or GPRS
ü
GPS Chip GPS Standard Built‐in Quad Band GSM Module Bundled Software Free
GSTAR GS‐89 +NMEA protocol Siemens MC55i GSM 850/900/1800/1900MHz Standard Edition
Setup Software
Remote (GSM Modem GS300) & Local (USBport)
Centre Software
Support txt database, max. 99 data loggers
UPD Testing Tool
available
Optional Software
Basic or Premium Edition
GPRS Data Logger [built in GPS] How to setup GS902? [1] Mobile Phone
[2] Setup Software
[3] Server Software Premium Edition
How to receive data from GS902? [1] Server Software Premium Edition
~ schematics
GPRS Data Logger [built in GPS]
~ software
Premium Server Software
Auto Data Recovery Function: When live data is lost owing to GSM network problem, Server will automatically retrieve the logged data from the data loggers once network resumes.
♦
Receiving data via Internet & SMS remotely and USB locally
♦
Display of live data and devices status in real time
♦
Maintaining the record database in xml files
♦
Maintaining the database of GPRS data loggers iden‐ tities and properties
♦
Display status of server, data loggers and clients
♦
Interface for user development and application
♦
Alert user via TCP / Email / SMS
♦
Grouping of user/client/email/SMS phone numbers
♦
Client software support
♦
Support of integrating with: Access / MySQL / SQL / Oracle Databases
Client Software Data Logger Client software provides: ♦
Downloading data from Server
♦
Real time monitoring of a number of data loggers
♦
Alert users when temperature is too high/low
♦
Alert customers via email, SMS or TCP
♦
Historical data review
GPRS Data Logger [built in GPS] Edition
~ software Centre
Basic
Premium
—
—
Yes
Yes
Yes
Yes
Receive Data via USB Port
—
—
Yes
Live Data Display
—
Yes
Yes
[A] Server Software Receive Data via SMS Receive Data via GPRS Data
Database
txt Daily only
Access
Access / MySQL SQL / Oracle
XML
—
Yes
Yes
Data Export to Excel
—
Yes
Yes
Remote Command via SMS
—
—
Yes
Remote Command via Internet
—
—
Yes
Schedule Command
—
—
Yes
Auto Data Recovery
—
—
Yes
Temperature & Humidity Alert [GS902S]
—
—
Yes
Send Alarm Alert via TCP network
—
—
Yes
Send Alarm Alert via email
—
—
Yes
Send Alarm Alert via SMS
—
—
Yes
Alert Users Grouping
—
—
Yes
Alert Emails Grouping
—
—
Yes
Client Software support
—
—
Yes
Max. GPS Trackers simultaneous support
99
999
9999
GPS Trackers Management
—
—
Yes
User Authentication & Management
—
—
Yes
Network Client Authentication & Management
—
—
Yes
Web Based Access support
—
—
Yes
SDK for user development
—
—
Yes
N.A.
N.A.
Bundled
Live Data Display
—
—
Yes
Alarm Alert
—
—
Yes
Graphic Display of Temperature & Humidity
—
—
Yes
Temperature & Humidity Hi/Low Alert
—
—
Yes
Historical Data Access
—
—
Yes
[C] Bundled GSM Modem
—
—
Yes
[B] Client Software
Centre Edition is bundled with GPS Tracker free.
Basic & Premium Edition are sold separately.
