Transcript
dv55_E.book
265 ページ
2008年5月6日 火曜日 午前9時8分
GPS Function Using GPS function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266 Positioning your location . . . . . . . . . . . . . . . . .
266 Setting position location. . . . . . . . . . . . . . . . . . 267 Using GPS compatible i-appli . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267 Providing location information upon the request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273 Notifying present location . . . . . . . . . . . . . 277 Displaying the history of confirmed location information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278 Using location information from each function. . . . . . . . . . . . . . . . 280
265 e13_dv55_7e.fm [265/280]
dv55_E.book
266 ページ
2008年5月6日 火曜日 午前9時8分
Position location
Using GPS function
GPS Function
Note that DoCoMo shall not be liable for the pure economic loss if you cannot confirm the positioning (communication) result with FOMA terminal failure, malfunction, error or external factors such as power failure (including battery exhaustion). FOMA terminals cannot be used as navigation system for professional use of aircrafts, vehicles, person, etc. Therefore, note that DoCoMo shall not be liable for the loss caused by the navigation system to use location information. FOMA terminals cannot be used as surveying GPS of high accuracy. Therefore, note that DoCoMo shall not be liable for the loss caused by the error of location information. GPS is the service in charge of Department of Defense of USA, therefore, GPS radio wave condition may be controlled (accuracy degradation, radio wave abort, etc.) for the US national security reason. Position location and Location notification are not available when Function lock is applied to GPS. Location provision, Position location and Location notification are not available in the following cases. When a FOMA card is not inserted During the Self mode During Software update Note that GPS is using the radio wave from satellites, and following conditions may cause the radio wave abort or difficulty to receive. In or under buildings In basement, tunnel, underground or water In density area with buildings or residence In bags or boxes In or under densely trees Near high-tension line Inside cars or trains In bad weather with heavy rain/snow When people or objects are blocking mobile phones When hands are covering screen/keypad/microphone/speaker of mobile phones In these cases, the error of retrieved location information may be 300 m or more. Unable to use GPS function of FOMA terminals out of service area or overseas.
266 e13_dv55_7e.fm [266/280]
Positioning your location Position the present location and check your place. Use this function for more convenient use such as showing a map from positioning location information, changing the location information to a URL, sending mail with the URL pasted, etc. Transmission charges are not incurred when the present location is positioned. However, packet transmission charges are applied when a map is displayed based on the location information. Change sound/volume/LED color for Position location (nP. 109, P. 123).
1
In the Custom menu, select [LifeKit]/[GPS menu]/[Position location]. In stand-by: Press $ (for 1+ seconds). • It is activated following the GPS button setting after positioning. B flashes while GPS positioning is being performed.
Accuracy level ★★★ : Almost accurate location information Error is less than 50 m Accuracy level ★★☆ : Relatively accurate location information Error is less than 300 m Accuracy level ★☆☆ : Rough location information Error is 300 m or more Accuracy level is a rough indication. It may differ depending on the radio wave condition of the surroundings. To use the location information as a result of location positioning at the displayed accuracy level while the present location is being positioned: Press C.
dv55_E.book
267 ページ
2008年5月6日 火曜日 午前9時8分
To cancel position location: Press i/t.
2
Select a usage.
Set position loc.
Setting position location
1
When [Quality mode] is selected, the positioning is performed with longer time. As a result, more accurate positioning is performed than in the Standard mode.
2
1
In the Custom menu, select [LifeKit]/[GPS menu]/[Set position loc.]/[GPS button setting]/select the action/t.
2
Select [OK].
Select [OK].
Using GPS compatible i-appli Start i-appli compatible with GPS function. When GPS compatible i-appli is used, location information is sent to the information provider of the software used. When GPS function is used on GPS compatible i-appli, set Location usage setting of the software used to [Send].
Setting GPS button Set the operation that is automatically launched after positioning the present location by pressing $ for 1+ seconds.
In the Custom menu, select [LifeKit]/[GPS menu]/[Set position loc.]/[Positioning mode]/ select the Positioning mode/t.
1
In the Custom menu, select [LifeKit]/[GPS menu]/[i-appli].
2
Select software/t.
GPS Function
Select [Read a Map]/[OK]. • Check peripheral area information using “iエリア (周辺情報)” (i-area (peripheral area information)) after displaying a map. Refer to the DoCoMo website for “iエリア (周辺情報)” service. Select [Run i-appli]/select i-appli/t. Select [Paste to mail]/[OK]/compose and send a mail. • The Location URL to be sent appears only on the i-mode supported terminal. Select [Add to phonebook]/add to the phonebook. Select [Attach to image]/select an image t (repeatable)/C/select the saving method/t. To check the location information: Press i.
Setting Positioning mode for positioning location
Using “地図アプリ” (Mapping appli) With the pre-installed “地図アプリ” (Mapping appli), use the GPS function and maps for various uses such as viewing the present location or specified location, searching the peripheral area information or navigating to a destination for using vehicle, walking or driving a car. Enter the information with voice to use transfer information easily.
Continued on next page
e13_dv55_7e.fm [267/280]
267
dv55_E.book
268 ページ
2008年5月6日 火曜日 午前9時8分
Note Packet transmission charges apply when using this service. It is recommended to use this software with Pake-hodai or Pake-hodai full.
GPS Function
To undo after deleting this software, download it from [iエリア-周 辺情報-] in iMenu. This software cannot be used when 2in1 mode is set to [B mode]. Note that there is no guarantee for the accuracy and immediacy of the information such as a map and route. Make sure that a person other than the driver operates this software while driving. Screenshots in this manual are examples and may differ from actual screens.
■ Basic service and additional services For this software, there are basic service and additional services. Basic service: Service provided by DoCoMo for free Additional services: Services provided by ZENRIN DataCom for a fee Use the additional services (except the traffic information) for free until the 90th day from the first-time use of this software. To use the additional services on and after the 91st day, the membership subscription (fees apply) for “ゼンリンL地図+ナビ” provided by ZENRIN DataCom is required. Even if the membership is signed up while this software is used, the software does not need to be downloaded again. Use this preinstalled software. Details
From the 91st day
Use GPS to view the map of the present location or a map by entering any word, address or phone number. Enter the address with voice to view a map easily.
Free
Check the map of the location saved in this software, the server or the phonebook or previously searched. Save the location to the server so that the saved point is shared with a PC.
Fees apply
Menu Map
268 e13_dv55_7e.fm [268/280]
Menu
Details
From the 91st day
Local Search the information on a shop, facility or iD-supporting Search shop near the current location or specified location to download a coupon from the restaurant information. Check the information on parking availability in the peripheral area. Enter the information with voice to search peripheral area information.
Free
Navi- Totally navigate to the destination including the gation means of using vehicle, walking and driving. Easily navigate to your home saved.
Fees apply
Transfer Check train transfer information and timetable. Check a train route on a map and set an alarm before departure. Enter the information with voice to use transfer information easily.
Fees apply
Extra
Change the mode to various maps such as a map that is moved by tilting the FOMA terminal, a 3D map, and a map with emphasized railways, including a normal map. Use GPS to leave footprints in the present location or view the track of motion. Display the location, which was positioned using GPS in the past, in the unit of municipality or prefecture with color on a map.
Free
Send “footprints” data saved in the microSD Card to Mapping appli server, and check the footprints even on a PC. Backup the area which was positioned using GPS in the past to the server.
Fees apply
Emer- Search helpful facilities in case of disaster. gency This i-appli working with Mapping appli without communication is for emergency.
Fees apply
Setting/ Check the settings of map display, navigation display, Help etc. and how to use them.
Free
dv55_E.book
269 ページ
2008年5月6日 火曜日 午前9時8分
■ Map display screen and operations
■ Starting the “地図アプリ” 1 In stand-by, press i (,) (for 1+ seconds)/[地図アプリ]. Each menu appears on the TOP screen. Close the menu to view the previously searched map. When the software is activated for the first time, the user agreement and the safety precaution appear.
TOP screen
©2008 ZENRIN DataCom Key operations while displaying a map To view menu
i (メニュー) To close the menu: Press i (閉じ る).
To view quick access menu
t C (拡縮) The bar indicating the scale appears. Press p to view details of the map and press o to view a wide area of the map. Press C (閉 じる) to determine the scale and hide the bar.
To zoom/shrink a map
When the 91st day passes
To move a map to up/down/ left/right
w
To close menu or to return to the first result position
c
To rotate a map to right/left
Right: #
GPS Function
When the 91st day passes without the membership subscription When this software is activated for the first time on and after the 91st day, a message indicating that available functions are limited and a message referring to the membership subscription appear. Also, when the additional service menu is selected, the same messages appear. Sign up as a member on the site of “ゼンリン L地図+ナビ” from this software.
Left: *
To position a map facing north 0
Continued on next page
e13_dv55_7e.fm [269/280]
269
dv55_E.book
270 ページ
2008年5月6日 火曜日 午前9時8分
Key operations while displaying quick access menu o (周辺を調べる) To check the peripheral area information around the location displayed on the map To search a route to the center p (ココへナビ) of the map on which a departure place is set and displayed To send the URL of the displayed map via mail
q (ココをQ送信)
GPS Function
To save the location information r (ココを登録) Save the location information to of the center of the map to this the server so that the saved software, the server or the point is shared with a PC. phonebook To close the quick access menu t (地図へ) To display the point to view a 3D 1 (3D・パノラマ) Select a point to view a 3D intersection or panoramic intersection or panoramic picture. picture To display buildings in the peripheral area
A screen displaying a search result as a map is shown and the operations are explained below. When viewing the search results as a list, select a search result from the list to view the map.
C (拡縮) The bar indicating the scale appears. Press p to view details of the map and press o to view a wide area of the map. Press C (閉じる) to determine the scale and hide the bar.
■ Searching a route to guide (navigate) to the destination with voice and a screen Set a departure place and a destination to search a route. Routes for walking, using public transportation and driving are displayed. Guide (navigate) to the destination with voice and a screen after searching a route.
1
©2008 ZENRIN DataCom
e13_dv55_7e.fm [270/280]
To zoom/shrink a map
2 (ビルテナント) To check tenants: Select a building/ t/[このビルのテナント].
■ Search result screen of the neighborhood information and key operations
270
Key operations while displaying result to search the neighborhood information To confirm details Select a search result/t information of search When the cursor is not placed on the result search result, the quick menu appears. To move a map to up/ w down/left/right To search with displayed 5 map centered again To view the previous 4 search result To view the next search 6 result i (メニュー)/[はい] To view menu The search result is deleted, and the peripheral area information ends.
In the TOP screen, select [Navigation]/[ナビをす る].
dv55_E.book
2
271 ページ
2008年5月6日 火曜日 午前9時8分
Select the [出発地] field/t/select an item/ t/set a departure place.
5 Select the [条件設定] field/t/select an item/ t/set the condition/[上記で設定]/[OK].
Position the present location to set (only for setting a departure place).
乗換条件
Select a priority criterion of selecting transfer among “早い”, “安い”, and “楽々”.
フリーワード検索
Search by key words to set.
徒歩ルート
地図上で指定
Set a departure place on a map.
Select a priority criterion of the route among “お まかせ”, “屋根多い”, and “階段少ない”.
TEL/〒検索
Search by a phone number or postal code to set.
\特急利用
住所一覧から
Select an address to set.
ジャンルから
Select a genre to set.
Select whether to use a limited express train when the total distance of the route is 100 km or less.
通常利用車種
Set from the previously displayed map.
Select a car model to be used.
履歴から 登録地点から
Set from the location information saved in this software, the server or the phonebook.
自宅
Set the location information of your home.
6
To check the set departure place: Select [出発地の確認].
3
Select the [目的地] field/t/select an item/ t/set a destination place.
Select the [時間指定] field/t/select an item/ t. 現時刻で指定
Search a route with the current time.
出発時刻指定
Specify a departure time to search a route.
到着時刻指定
Specify an arrival time to search a route.
終電を利用
Search a latest train route on the day.
To search route used car only: Select [Zのみで検索]. Routes (up to six entries) appear. When there are transfer routes of different transportations, the characteristics of the routes are shown as icons. Icon 早
Use the same operations as step 2 to set a destination place. To check the set destination place: Select [目的地の確認].
4
Select [XYZで検索].
Characteristics Route of the shortest time distance
安
Route with the lowest fee
楽
Route with the least number of transfers
オススメ
GPS Function
現在地 (GPS)
Route that satisfies the above three conditions
有料
Route for a car with toll roads
一般
Route for a car with open roads
To register the route: Select [ルートを登録].
7
Select a route/t/[ナビ・ルート確認]/[ナビ]/[ナ ビ (省電力)]/[はい]. Starts navigation to your destination. To check the route: Select a route/t/[ナビ・ルート確認]/ [ルート確認]/[はい].
271 e13_dv55_7e.fm [271/280]
dv55_E.book
272 ページ
2008年5月6日 火曜日 午前9時8分
■ Navigation (automobile) display screen and operations Navigation (automobile) display screen layout
GPS Function
Present location and traveling direction
©2008 ZENRIN DataCom Key operations while using a navigation
Route to a destination
To view TOP menu
i (メニュー)/[はい] The navigation ends.
To view quick access menu
t C (拡縮) The bar indicating the scale appears. Press p to view details of the map and press o to view a wide area of the map. Press C (閉じる) to determine the scale and hide the bar.
To zoom/shrink a map
To move a map to up/down/left/right w To return to the original position
c
To switch to the intersection mode 2 To stop/start the navigation
5
To rotate a map to right/left
Right: # Left: *
To position a map facing north
0
272 e13_dv55_7e.fm [272/280]
Key operations while displaying quick access menu To search a parking area around the destination
o (目的地周辺^)
To display the route search result (time, fare, etc.)/To set the navigation
p (結果&設定)
To search a route to the destination with up to three stopover places added
q (経由地を設定)
To search a route from the present location to the destination again
r (リルート)
To delete the displayed route
1 (ルート消去)
To switch to the intersection mode
2 (Rモード切替)
■ Using 音声入力 In 音声入力 menu, enter the information with voice to search peripheral area information, use transfer information or view a map easily. Example: Searching “a nearby convenience store”
1
In the TOP screen, select [Local Search]/[音声入 力].
2
Select [音声入力開始]/speak the peripheral area information to search to the mouthpiece (example: “この辺のコンビニ”)/[音声入力完了].
The voice entry startup screen appears.
dv55_E.book
273 ページ
2008年5月6日 火曜日 午前9時8分
Loc. request menu
Providing location information upon the request Set whether to provide the present location upon the request from the other party.
Microphone screen
Voice entry result screen
3 In the voice entry result screen, select [上記で検索]. To perform the voice recognition again: Select [音声再入力].
■ Using Setting/Help
1
In the TOP screen, select [Setting/Help]/select an item/t. 各種設定
Perform reset appli general settings, settings for navigation, your home or the nearest station, deletion of all histories, or appli settings.
Check how to use, frequently-asked questions and the user agreement. 会員情報確認 Check whether the membership of “ゼンリンL 地図+ナビ” is signed up. ヘルプ・規約
PC確認方法
Display URL, login ID, or password to view mapping appli site for PC.
Related Operations Move a map by tilting the FOMA terminal
GPS Function
Voice entry startup screen
Location provision may require the subscription to a service provider supporting the service and the service usage fee. To use a service supporting location provision, set Location request menu to [Loc. provision:ON]. In addition, usage settings for each service (GPS Service settings) may be required. To use “imadoco-search”, settings accessed by [iMenu]/[料金&お申込・ 設定]/[オプション設定]/[位置情報利用設定]/[イマドコサーチ 設定] is required. Sent location information may not reach a service provider depending on the signal strength. Location information may be sent to a service provider without any operation under [Loc. provision:ON]. Under [Loc. provision:OFF], even if the location information from the other party is received, it is automatically rejected, and the history of location provision does not remain. A (blue) appears when [Loc. provision:ON] is set. Until a location provision permission schedule ends if it is set, A (blue) is displayed while permitted and A (black) while rejected. Change sound/volume/LED color for Location provision (nP. 109, P. 123). Location information is provided free of charge. For the use of location information, check the information of a service provider and DoCoMo website. Charges may apply for these functions.
In the TOP screen, select [Extra]/[地図モード]/[直感地 図モード]/[OK].
Continued on next page
e13_dv55_7e.fm [273/280]
273
dv55_E.book
274 ページ
2008年5月6日 火曜日 午前9時8分
1
In the Custom menu, select [LifeKit]/[GPS menu]/[Loc. request menu]/[Loc. prov. ON/ OFF]/enter the terminal security code/t.
2
Select the setting/t.
Related Operations Set Positioning mode of Location provision
In the GPS menu, select [Loc. request menu]/[Positioning mode]/select the Positioning mode/t/[OK].
Note Location provision can also be set from initial settings.
■ Setting permission schedule onto Location provision
GPS Function
1
In the Location provision ON/OFF setting screen, select [Permission sched.].
2
Select [Start]/enter the start time (24-hour format)/t.
3 Select [End]/enter the end time (24-hour format)/ t.
4
Select [Repeat]/select the repeat method. Select [Daily]. Select [Set day of week]/select a day of the week t (repeatable)/C. Select [Not set]/proceed to step 6.
5 Select [From]/[Start date setting]/enter the start date/t/[End date setting]/enter the end date/t. To not set valid period: Select [End date]/[Not set].
6
Press i.
Note If an end time is set to the time before the scheduled time, location information is not provided for the day.
274 e13_dv55_7e.fm [274/280]
Operation when permission schedule is set onto location provision Example: When the current date is “July 22, 2008, 14:00” Start: 15:00 End: 22:00 Setting details Schedule when location provision is performed Repeat Valid period Not set 07/22/2008, 15:00 to – 07/22/2008, 22:00 Everyday From 07/27/2008 Everyday from 07/27/2008, 15:00 End date 08/27/2008 to 08/27/2008, 22:00 (between 15:00 and 22:00) From 07/17/2008 Everyday from 07/22/2008, 15:00 End date 08/27/2008 to 08/27/2008, 22:00 (between 15:00 and 22:00) Not set Everyday after 07/22/2008, 15:00 (between 15:00 and 22:00) Set day of From 07/27/2008 Set day of week from 07/27/2008, week End date 08/27/2008 15:00 to 08/27/2008, 22:00 (between 15:00 and 22:00) From 07/17/2008 Set day of week from 07/22/2008, End date 08/27/2008 15:00 to 08/27/2008, 22:00 (between 15:00 and 22:00) Not set Set day of week after 07/22/2008, 15:00 (between 15:00 and 22:00)
dv55_E.book
275 ページ
2008年5月6日 火曜日 午前9時8分
Start: 09:00 End: 22:00 Setting details Repeat Valid period Not set – Everyday From 07/27/2008 End date 08/27/2008 From 07/17/2008 End date 08/27/2008 Not set From 07/27/2008 End date 08/27/2008 From 07/17/2008 End date 08/27/2008 Not set Start: 15:00 End: 10:00 Setting details Repeat Valid period Not set – Everyday From 07/27/2008 End date 08/27/2008 From 07/17/2008 End date 08/27/2008 Not set
Schedule when location provision is performed 07/22/2008, 15:00 to 07/23/2008, 10:00 Everyday from 07/27/2008, 15:00 to 08/28/2008, 10:00 (between 15:00 and 10:00 on the next day) Everyday from 07/22/2008, 15:00 to 08/28/2008, 10:00 (between 15:00 and 10:00 on the next day) Everyday after 07/22/2008, 15:00 (between 15:00 and 10:00 on the next day)
Repeat Set day of week
Setting details Valid period From 07/27/2008 End date 08/27/2008 From 07/17/2008 End date 08/27/2008 Not set
Start: 09:00 End: 09:00 Setting details Repeat Valid period Not set – Everyday From 07/27/2008 End date 08/27/2008 From 07/17/2008 End date 08/27/2008 Not set Set day of week
From 07/27/2008 End date 08/27/2008 From 07/17/2008 End date 08/27/2008 Not set
Schedule when location provision is performed Set day of week from 07/27/2008, 15:00 to 08/28/2008, 10:00 (between 15:00 and 10:00 on the next day) Set day of week from 07/22/2008, 15:00 to 08/28/2008, 10:00 (between 15:00 and 10:00 on the next day) Set day of week after 07/22/2008, 15:00 (between 15:00 and 10:00 on the next day) Schedule when location provision is performed 07/22/2008, 14:00 to 07/23/2008, 09:00 Everyday from 07/27/2008, 09:00 to 08/28/2008, 09:00 (between 09:00 and 09:00 on the next day) Everyday from 07/22/2008, 14:00 to 08/28/2008, 09:00 (between 09:00 and 09:00 on the next day) Everyday after 07/22/2008, 14:00 (between 09:00 and 09:00 on the next day) Set day of week from 07/27/2008, 09:00 to 08/28/2008, 09:00 (between 09:00 and 09:00 on the next day) Set day of week from 07/22/2008, 14:00 to 08/28/2008, 09:00 (between 09:00 and 09:00 on the next day) Set day of week after 07/22/2008, 14:00 (between 09:00 and 09:00 on the next day)
GPS Function
Set day of week
Schedule when location provision is performed 07/22/2008, 14:00 to 07/22/2008, 22:00 Everyday from 07/27/2008, 09:00 to 08/27/2008, 22:00 (between 09:00 and 22:00) Everyday from 07/22/2008, 14:00 to 08/27/2008, 22:00 (between 09:00 and 22:00) Everyday after 07/22/2008, 14:00 (between 09:00 and 22:00) Set day of week from 07/27/2008, 09:00 to 08/27/2008, 22:00 (between 09:00 and 22:00) Set day of week from 07/22/2008, 14:00 to 08/27/2008, 22:00 (between 09:00 and 22:00) Set day of week after 07/22/2008, 14:00 (between 09:00 and 22:00)
275 e13_dv55_7e.fm [275/280]
dv55_E.book
276 ページ
2008年5月6日 火曜日 午前9時8分
Setting host Set the host for the GPS service setting site. ※ Setting does not normally need to be changed.
1
In the Custom menu, select [LifeKit]/[GPS menu]/[Loc. request menu]/[Host setting]/ enter the terminal security code/t.
2
Select [User specified host]/C.
GPS Function
To return to the default host: Select [Default]. To change to the preset user-defined host: Select [User specified host]. To delete to the set user-defined host: Select [User specified host]/C/C/[Yes].
3 Select [Host name]/enter the host name/t. Enter up to 99 single-byte alphanumeric characters and symbols.
4
Select [Host URL]/enter the host URL/t. Enter up to 100 single-byte alphanumeric characters and symbols.
5 Press i. GPS service settings Configure the setting required for Location provision.
1
In the Custom menu, select [LifeKit]/[GPS menu]/[Loc. request menu]/[Service settings].
2
Configure the settings.
Connected to the GPS service setting site. Please contact GPS service providers for the setting details.
276 e13_dv55_7e.fm [276/280]
When the location information is requested Location provision starts when the request to provide the location information is received. When each service usage setting is set to [許可], the location information is automatically provided upon request. When each service usage setting is set to [毎回確認], a confirmation screen asking whether to provide appears at every request. Select [Yes] to start providing the location information. If no operation is performed when the location is requested, return to stand-by display after providing location information is end, and the stock icon @ (Send loc - Resp/Send loc - No resp/Send loc Failed) appears. Select the stock icon and location histories appear. To cancel Location provision, press i and press t. However, the location information may be sent depending on timing. Sent location information may not reach a requestor of the location information depending on the signal strength. Host ID for Location provision may not be displayed on the screen.
Note When the 2in1 service is used, only Number A is available regardless of the mode. If the location information provision is requested with Number B, the location information is not provided, and the failure of search is notified to the other party.
When the location information is requested from the other party who used imadocokantan search A confirmation screen for location provision appears at every request. Select [Yes] to immediately notify to a rough positioning result to the other party. After [Yes] is selected, the GPS positioning screen appears, and a high-accuracy positioning result is notified. If the location provision is canceled after [Yes] is selected on a confirmation screen for location provision, a rough positioning result is notified to the other party. In this case, the location history is recorded, but the location information does not appear.
dv55_E.book
277 ページ
2008年5月6日 火曜日 午前9時8分
When the location information is requested while in Public mode (Drive mode) If Location provision is set to [許可] for usage settings of each service, a confirmation screen for location provision is displayed, the GPS positioning screen appears, and the location is provided after GPS positioning. However, Location provision/accept, Location provision/notify, vibrator or called LED does not operate. When Location provision is set to [毎回確認] for usage settings of each service, location information is not provided.
Note Change sound/volume/LED color for Location notification (nP. 109, P. 123). When the 2in1 service is used, the location information is notified with Number A regardless of the mode.
Related Operations Set Positioning mode of Location notification
Location notification
Notifying present location Notify the positioned Location information of the present location to specified service clients (service provider supporting Location notification). See the information of a service provider supporting Location notification or DoCoMo website. In addition, subscription to a service provider supporting Location notification and a service usage fee may be required. Sent location information may not reach a service provider depending on the signal strength. Using Location notification is charged.
1 2
In the Custom menu, select [LifeKit]/[GPS menu]/[Loc.notification/set]/[Location notification]. Select the service client. Select [Select from list]/select a service client/t. Select [Direct input]/enter the service client ID/t. To cancel positioning location: Press i/t. • Positioning may not be canceled or the location information may be sent depending on timing.
Saving service clients Save up to five service clients to notify the present location.
1
In the Custom menu, select [LifeKit]/[GPS menu]/[Loc.notification/set]/[Notification clients].
2
Press C/[Save new]. Alternatively, press i.
3 Select [Name]/enter a service client name/t. Enter up to 32 single-byte (16 double-byte) characters.
4
Select [ID]/enter the service client ID/t. Enter ID specified by a GPS service provider. Enter up to 12 single-byte numeric characters. [b] and [#] are also available to enter.
5 Select [Phone number]/enter a phone number.
Select [Search phonebook]/select a phone number/t. Select [Direct input]/enter a phone number/t.
Continued on next page
e13_dv55_7e.fm [277/280]
GPS Function
In the GPS menu, select [Loc.notification/set]/ [Positioning mode]/select the Positioning mode/t/ [OK].
277
dv55_E.book
278 ページ
2008年5月6日 火曜日 午前9時8分
The phone number already saved as location service client cannot be added.
6 Select [Auto]/select the setting/t.
If automatic notice is set to [Yes], automatically notifies the present location to the recipient when a voice call is made to a saved phone number.
7
Press i.
Location history
Displaying the history of confirmed location information Up to 50 entries of location information positioned by GPS function are saved in Location history. Use location information on the history to display a map or for other operations.
Note
GPS Function
When 50 entries are exceeded, entries are overwritten starting with the oldest. Even if latitude and longitude are indicated on the Location history screen, sent location information may not reach the service clients or provider.
Copy location service clients to a microSD Card or location service clients saved on a microSD Card to the FOMA terminal handset.
Related Operations Edit the saved contents of location service clients In the notification clients screen, select a location service client/t/select an item/t/edit/i.
Add location service clients to phonebook
In the notification clients screen, select a location service client/C/[Add to phonebook]/add to the phonebook.
Delete location service clients
1 2
3
In the notification clients screen, select a location service client/C/[Delete]. Select the deletion method. Select [Delete one]. Select [Delete selected]/select a service client t (repeatable)/C. Select [Delete all]/enter the terminal security code/t.
Select [Yes].
278 e13_dv55_7e.fm [278/280]
1
In the Custom menu, select [LifeKit]/[GPS menu]/[Location history]. Location history types and dates are listed starting with the most recent.
Location history list
Location history type
V U
Position location
T
Location notification
Location provision
j appears when the location history contains location information. To show a map: Select a location history/i/[OK].
dv55_E.book
2
279 ページ
2008年5月6日 火曜日 午前9時8分
Select the location history/t.
Note
3 Location history detail screen 1Positioning date 2History type [Position location]/[Location notification]/[Location provision] appears. For [Location notification]/[Location provision], the icon and the information of the service client or service client for provision appear. For Location notification
G
Service client name
H
Service client ID
For Location provision
G H I J
Service client name for Location provision Service client ID for Location provision Requestor name for Location provision Requestor ID for Location provision
※ When the requestor ID for Location provision is a phone number or mail address, Phone To (AV Phone To) (nP. 184) and Mail To (nP. 184) can be used.
Using location history
1
Select the location history on the Location history list screen/C/select a usage. Select [Read a Map]/[OK]. Select [Run i-appli]/select i-appli/t. Select [Paste to mail]/[OK]/compose and send a mail. Select [Add to phonebook]/add to the phonebook. Select [Attach to image]/select an image t (repeatable)/C/select the saving method/t. Select [Delete]/[Delete one]/[Yes]. Select [Delete]/[Delete selected]/select a location history t (repeatable)/C/[Yes]. Select [Delete]/[Delete all]/enter the terminal security code/t/[Yes].
GPS Function
Accuracy is a rough indication. It may differ depending on the radio wave condition of the surroundings. The entry that has failed or interrupted to position for Position location is not saved as Location history. If the location information is provided when the 2in1 service is used, the requestor name for Location provision appears in each mode of 2in1 according to the Phonebook 2in1 setting. The location information and accuracy recorded in Location history may differ from those sent to a location provider and a location service client due to the signal strength, etc.
1 2
3Location information Latitude : Degrees, Minutes, Seconds Longitude : Degrees, Minutes, Seconds Datum : wgs84 (World Datum), tokyo (Tokyo Datum) Accuracy : Error range of accuracy (nP. 266)
279 e13_dv55_7e.fm [279/280]
dv55_E.book
280 ページ
2008年5月6日 火曜日 午前9時8分
Using location information from each function Use location information with each function by adding location information to data such as phonebook and still pictures or displaying a map based on the added location information.
Using added location information ■ Using location information in the FOMA terminal handset phonebook or in the images saved in My picture of Data box Example: Phonebook
1
Select [Read a Map]/[OK]. Select [Run i-appli]/select i-appli/t. Select [Paste to mail]/[OK]/compose and send a mail. Select [Attach to image]/select an image t (repeatable)/C/select the saving method/t. Select [Loc. info details]. For My picture of Data box: In the image list or image display screen, press C/[Location info]/select a usage. • Save location information to the phonebook.
Adding location information GPS Function
Example: Phonebook
1
In the phonebook entry screen, select j/select a location information to add. Select [From position loc.]/t/[Yes]. • The present location is positioned by GPS function. Select [From loc. history]/select a location history/i/ [Yes]. Select [From image]/select an image/i. Select [Loc. info details]. Select [Del. location info]. For pictures saved in My picture of Data box or i-mode mail, location information added to the phonebook can be selected. The location information added to an image cannot be selected. For My picture of Data box, when the operation is made from the image list screen, multiple images to which location information is added can be selected.
280 e13_dv55_7e.fm [280/280]
In the phonebook entry details screen, select j/ select a usage.
■ Using location information of sites, data broadcasting, ToruCa or Message R/F Example: Sites
1
While viewing a site, select location information/ t/select a usage. Select [Run i-appli]/[OK]/select i-appli/t. Select [Read a map]/[OK]. Select [Paste to mail]/[OK]/compose and send a mail. To check the location information: Select a usage/t/C.