Preview only show first 10 pages with watermark. For full document please download

Graphics Lcd Specifications

   EMBED

Share

Transcript

Graphics LCD Specifications Part Number: FDS128x128(71.3x75.41)LGG Features: 1. 2. 3. 4. 128x128 dots Graphic LCD module Built-in controller (ST7528 or Equivalent) 1/128 duty cycle;1/12bias; 3.0V power supply RoHS compliant Page 1 of 3 Focus Display Solutions ® ©2014 Focus Display Solutions Interface Pin Connections NO SYM EXT CONNECT FUNCTION Microprocessor interface select input pin -PS[2:0]=001:8080-series parallel MPU interface -PS[2:0]=011:68000-series parallel MPU interface -PS[2:0]=000:3-Line-SPI MPU interface -PS[2:0]=010:4-Line-SPI MPU interface -PS[2:0]=100:IIC-SPI MPU interface 1~3 PS0~PS2 I 4 I I Chip select input pins 5 CSB RST 6 A0 I Register select input pin 7 RW-WR I Read / Write execution control pin 8 E-RD I Read / Write execution control pin 9~16 DB0~DB7 I/O 17 VDD Power supply Power supply for LCM (+3.0V) 18 VDD Power supply Power supply for LCM (+3.0V) 19 VSS Power supply 20 VSS Power supply Reset input pin 8-bit bi-directional data bus that is connected to the standard 8-bit microprocessor data bus. 21 VOUT-OUT Supply If the internal VOUT voltage generator is used, the VOUT_IN & VOUT_OUT must be connected together. If an external supply is used, this pin must be left open. 22 VOUT-IN Supply An external VOUT supply voltage can be supplied using the VOUT_IN pad. In this case, VOUT_OUT has to be left open, and the internal voltage generator has to be programmed to zero. 23~27 V4~V0 I/O LCD driver supply voltages 28 VR I V0 voltage adjustment pin 29 INTRS I Internal resistor select pin 30 NC Absolute Maximum Rating ITEM Power voltage SYMBOL MIN TYP MAX VDD-VSS 0.3 - 3.6 Input voltage VIN VSS - VDD Operating temperature VOP -20 - +70 VST -30 - +80 Storage temperature Page 2 of 3 Focus Display Solutions ® ©2014 Focus Display Solutions UNIT V °C Electrical Characteristics ITEM SYM CONDITION MIN TYP MAX Supply voltage for LCD VDD-VO Ta =25°C - 3.0 - - 3.0 - - 0.25 0.45 mA uA Input voltage VDD Supply Current IDD Input leakage current ILKG - - 1.0 “H” level input voltage VIH 2.2 - VDD “L” level input voltage VIL 0 - 0.6 Ta=25°C, VDD=3.0V Twice initial value or less Mechanical Data ITEM STANDARD UNIT MODULE DIMENSION 71.3 x 75.41 x 5.9 mm VIEWING AREA 65.5 x 60.51 mm DOTS SIZE 0.42 x 0.42 mm DOTS PITCH 0.44 x 0.44 mm Page 3 of 3 Focus Display Solutions ® ©2014 Focus Display Solutions UNIT V V