Transcript
User'sGuide
GrommetKit MountsErgotronLXArmstotheWorkFit-T&WorkFit-TL Sit-StandDesktopWorkstations
ENGLISH
CAUTION!ThisKitisonlyforthefollowingErgotronLXArms Mountingproductsotherthantheoneslistedwillcreateanunstablesituationandmayresult inequipmentdamageand/orpersonalinjury
- / -
-
- / -
LXDeskMountLCDMonitorArm
LXDeskDualDirectArm
LXDualSide-by-SideArm
For the latest User Installation Guide please visit: www.ergotron.com User's Guide - English Guía del usuario - Español Manuel de l’utilisateur - Français Gebruikersgids - Deutsch Benutzerhandbuch - Nederlands Guida per l’utente - Italiano Användarhandbok - svenska ユーザーガイド : 日本語 用户指南 : 汉语 ---W-rev D• /
of
Safety
WARNING PINCH POINT
DO NOT place hands on or near support bars. Pinch points are created during lifting and lowering the worksurface. Failure to follow these instructions may result in serious personal injury.
828-100
WarningImpactHazard!MovingPartscanCrushandCut Raisethisproducttoitsfulluppositionbeforeliingoffthedesk Twopeoplearerequiredtolithisproductoffthedesk DonottipthisproductonitssideorupsidedownThisproductmustremainuprightatalltimes Failuretoheedthiswarningmaycauseunintendedmotionofthelimechanismresultinginpossible seriouspersonalinjuryandorpropertydamage!
ENGLISH
WarningImpactHazard!WorksurfaceundertensionMovingPartscanCrushandCut RaiseworksurfacetotopofverticaladjustmentBEFOREremovingequipment Failuretoheedthiswarningmayresultinseriouspersonalinjuryandorpropertydamage!
WarningBecausemountingsurfacematerialscanvarywidelyitisimperativethatyoumakesuremountingsurfaceisstrongenoughto handlemountedproductandequipment
CAUTION!FollowtheseinstructionswhendrillinganewgrommetholeFailuretofollowtheseinstructionsmaycausedamagetoequipment orcreateandunstablesituationresultinginatippinghazardcausingpersonalinjuryorequipmentdamage
CAUTION! TIPPING HAZARD Rotating display past FRONT or REAR edge may create an unstable situation and could result in equipment damage and/or personal injury.
of
---W-rev D• /
Safety CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!
New Maximum Arm Weight Capacity when mounted on the WorkFit-T and WorkFit-TL - / - LXDeskMount LCDMonitorArm 14 lbs (6.35 kg)
- LXDeskDualDirectArm
4.8 lbs (2.18 kg)
4.8 lbs (2.18 kg)
- / - LXDualSide-by-SideArm
ENGLISH
6 lbs (2.72 kg)
6 lbs (2.72 kg)
A
WORKFIT-T 10 - 35 lbs* (4.5 - 15.88kg)
B
A
WORKFIT-TL 10 - 40 lbs* (4.5 - 18.2kg)
< 5 lbs (2.27 kg)
WorkFit-T: A+B= 10 - 35 lbs (4.5 - 15.88 kg) WorkFit-TL: A+B= 10 - 40 lbs (4.5 - 18.2 kg)
* Include the weight of the Arm(s) and monitor(s) when calculating total mounted weight. - / - LXDeskMount LCDMonitorArm
- LXDeskDualDirectArm
7.8 lbs
11.1 lbs
(3.6 kg)
(5.03 kg)
---W-rev D• /
- / - LXDualSide-by-SideArm
13.9 lbs (6.3 kg)
of
Components A
B
C
x
x
x
1
x / - x
x 2
4mm
/ -x " 3
x
WorkFit-T
WorkFit-T
ToolsNeeded Ø/” mm
ENGLISH
11mm
of
---W-rev D• /
Litofullupposition
Usecenterexistinggrommethole
Drillanewgrommetholeusing thetemplate WorkFit-T
WorkFit-T
DONOTuseanyotherholes
7
- / - LXDeskMountLCD MonitorArm - / - LXDualSide-by-SideArm
- LXDeskDual DirectArm
---W-rev D• /
6
of
ENGLISH
CAUTION!Drillinganewgrommetholeis onlywhenmountingthe - LXDeskMountLCDMonitorArm Drilling anewgrommetholeforanyotherproduct willcreateanunstablesituationandmay resultinequipementdamageand/or personalinjury
CAUTION!Followtheseinstructionswhendrillinganewgrommethole Failuretofollowthese instructionsmaycausedamagetoequipmentorcreateandunstablesituationresultingina tippinghazardcausingpersonalinjuryorequipmentdamage - LXDeskMount LCDMonitorArm
- LXDeskDual DirectArm
- LXDual Side-by-SideArm
Drillanewgrommetholeusingthetemplate Makesureyouusethecorrectsideofthetemplateforyourworksurface -OnesideofthetemplateisfortheWorkFit-Twhichhasa "wideworksurface -TheothersideofthetemplateisfortheWorkFit-TLwhichiswiderandhasa " kgwideworksurface Aligntheholesintemplatewiththefronttwoplugsintheworksurface Makesureyouusethecorrectsideofthetemplateforyourworksurface Drillyourgrommetholeanywherewithinthewhiteareaofthetemplate DONOTdrillintheshadedareasofthetemplates
ENGLISH
WorkFit-T
WorkFit-T
WorkFit-TL
WorkFit-TL
WorkFit-T
of
WorkFit-T
WorkFit-T
WorkFit-T
Ø/” mm
---W-rev D• /
4mm
4mm
SavescrewsforStep
- / - LXDeskMountLCD MonitorArm
- / - LXDualSide-by-SideArm
ENGLISH
- LXDeskDualDirectArm
/ -x "
/ -x "
4mm
4mm
ScrewsfromStep ---W-rev D• /
of
- / - LXDeskMountLCD MonitorArm
- / - LXDualSide-by-SideArm
- LXDeskDualDirectArm
/ -
ENGLISH
/ -
11mm
11mm CAUTIONForsecurearmaachmentandtoavoidequipmentdamage platemustmakecontactwithundersideofdeskonbothsidesofthehole CAUTION: Bolt must be centered in hole.
For Warranty visit: www.ergotron.com/warranty For Service visit: www.ergotron.com For local customer care phone numbers visit: http://contact.ergotron.com
© 2016 Ergotron, Inc. All rights reserved. of
---W-rev D• /
