Gsa Catalog

Transcript

GSA SCHEDULE GS-07F-0275Y SCHEDULE Contract GS-07F-0275Y 084 - Total Solutions for Law Enforcement, Security, Facilities Management, Fire Rescue, Special Purpose Clothing, Marine Craft & Emergency/Disaster Response FIREFIGHTING CLOTHING AND EQUIPMENT CASCADE FIRE EQUIPMENT COMPANY CASCADE FIRE EQUIPMENT COMPANY n 1 GSA SCHEDULE GS-07F-0275Y GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE AUTHORIZED FEDERAL SUPPLY SCHEDULE On-line access to contract ordering information, terms and conditions, up-to-date pricing, and the option to create an electronic delivery order are available through GSA Advantage!™, a menu-driven database system. The internet address for GSA Advantage! is http://www.gsaadvantage.gov. For more information on ordering from Federal Supply Schedules, go to How to Buy Through the GSA. Full GSA ordering information is available on the inside back cover of this catalog. CASCADE FIRE EQUIPMENT COMPANY P.O. Box 4248 Medford, OR 97501 Toll Free: (800) 654-7049 Telephone: (541) 779-0394 Fax: (541) 779-8847 E-mail: [email protected] Website: www.cascadefire.com FREE FREIGHT on all government orders within the contiguous U.S. MINIMUM ORDER: $50.00 RETURNS Please contact us before returning any items. If we have made an error, we will quickly replace the items in question. If it is the customer’s error, a restocking charge may apply. Please contact our sales department for further information. Federal Tax I.D. No: 93-0883255 DUNS Number: 13-196-8901 CAGE Code: 1DD28 California Corporation No: 11627970 CF4EC California Sales Tax Exempt No: SR-S-JHG-97-127983 Published OCTOBER 2015 Prices in this catalog are current at the time of publication but may change within the lifetime of the catalog. Action photos contributed by Kari Greer (www.kariphotos.com) and Dennis Rein (outsideedgephoto.com) 2 n CASCADE FIRE EQUIPMENT COMPANY GSA SCHEDULE GS-07F-0275Y CASCADE FIRE EQUIPMENT Cascade Fire Equipment Company began as a small business selling fire equipment regionally in Southern Oregon. Over 28 years later the company has grown to be a distributor for some of the leading names in firefighting equipment, and has become an innovative manufacturer of over 50% of its product line. Operations have expanded to a 20,000 square foot facility. A fully modern ISO 9001-2008 certified sewing department produces the highest quality STRIKE TEAM® fire gear; NFPA certified wildland firefighting clothing and gear specifically designed for the demands of wildland firefighters. Qualified engineers design products which are manufactured with state of the art machinery using only the best raw materials available. The machining department uses computerized lathes, mills, routers and machining center to produce pumps, slip-on components, drip torches, wye valves, forestry tools, and many other products developed in response to the needs of its customers. Cascade Fire Equipment builds custom slip-on firefighting units in a class of their own. From conception to completion each unit is computer designed and built on-site to customer’s specifications and unique design requirements including compact ATV units, slip-ons easily installed in the bed of a pickup, and full size units with an assortment of customized equipment boxes and options. By manufacturing most of the components for their slip-on units, Cascade guarantees the delivery of units that are dependable, versatile, and durable. Cascade’s slip-on units are used by forestry departments, city fire departments, and private contractors, and are in use in most states and several foreign countries. They are truly the standard that all other slip-on units are measured by. Cascade Fire Equipment continues to introduce new innovative firefighting products and strives to provide the best possible service to the firefighting profession. Their goal, as always, is to be the best in the business. PRODUCT INDEX SIn 465 11 - Fire Extinguishing/Suppressing Products, Retardant, Foams and Equipment Standard Slip-On Equipment...................................................... 3 End-Mount Style Slip-on Units................................................... 4 Top-Mount Style Slip-on Units.................................................... 5 Optional Slip-On Equipment.................................................... 6-7 Light Vehicle & ATV-Style Slip-Ons.............................................. 8 Polypropylene Tanks................................................................... 9 Fyr Flote Floating Pump............................................................ 12 CF Mini -Pumps & Centrifugal Pumps................................. 12-13 Hand Primer............................................................................. 13 SIn 465 17 - Heat Sensing Devices Fire Finder Heat Detector......................................................... 27 SIn 465 19 - Firefighting and Rescue Tools, Equipment, and Accessories Aqua-Puncture......................................................................... 11 Fireline Sprinkler...................................................................... 16 Hose Hooks............................................................................... 19 Forestry Hand Tools............................................................. 25-26 SCBA Cylinder Storage Rack...................................................... 28 Carry-Alls.................................................................................. 29 SIn 567 8 - Burning Equipment Backfire/Drip Torch and Parts.............................................. 26-27 SIN 567 15 - Hoses, Valves, Fittings, Nozzles, Couplings and Related Accessories Foam-Flo™................................................................................ 10 Wildland Monitor..................................................................... 10 Wildland Foam Suppressant..................................................... 11 Forestry & Municipal Fire Hose................................................ 14 Nozzles..................................................................................... 15 Valves....................................................................................... 16 Adapters................................................................................... 17 Spanners & Wrenches.............................................................. 18 LDH Turntable........................................................................... 19 Gravity Sock.............................................................................. 19 Wyes......................................................................................... 20 Water Flow Gauges.................................................................. 21 Discharge/Friction Loss Slide Calculator................................... 20 Gizmo Shutoff........................................................................... 20 Hose Roller & Hose Storage Rack............................................. 22 Hose Tester & Hose Cutter....................................................... 23 Ejector & Foot Valves............................................................... 24 SIN 633 30 - Structural Fire Fighting Clothing, Meet NFPA 1971 Innotex® Structural Turnouts.............................................. 30-33 SiN 633 38 - Wildland Fire Fighting Clothing, NFPA 1977 Compliant Wildland Face & Neck Protectors............................................. 35 Strike Team® Brush Clothing............................................... 36-37 Strike Team® Shirts and Pants............................................. 38-39 SiN 633 99 - New Products Relating to Special Purpose Clothing Hydrant Tool Bags..................................................................... 21 Mask Bags................................................................................. 30 RIT Bag...................................................................................... 31 Web Gear................................................................................. 39 Strike Team® Gear Bags & Packs.......................................... 40-43 Hose Packs........................................................................... 44-45 Radio Holders & Gear Holders.................................................. 46 PRODUCT INDEX CASCADE FIRE EQUIPMENT COMPANY n 1 GSA SCHEDULE GS-07F-0275Y Slip-On Firefighting Units Engineered for today’s demanding firefighting Cascade Fire Equipment builds custom slip-on firefighting units in a class of their own. From conception to completion each unit is computer designed and built on-site to customer’s specifications and unique design requirements including compact ATV units, slip-ons easily installed in the bed of a pickup, and full size units with an assortment of customized equipment boxes and options. Upon completion, each Slip-On Firefighting Unit is thoroughly inspected and tested to make sure the unit you receive delivers the highest performance possible for today’s demanding firefighting. Cascade manufactures most of the components for their slip-on units and guarantees the delivery of units that are dependable, versatile, and durable. Cascade’s slip-on units are used by government agencies, forestry departments, city fire departments, and private contractors, and are in use in most states and several foreign countries. They are truly the standard that all other slip-on units are measured by. With a Cascade Fire Equipment Slip-On, your pickup or flat-bed vehicle becomes a fast initial-attack firefighting unit. Because of their flexibility, capacity and convenience, these highly mobile units can easily mean the difference between a quick knockdown and a major fire. Please call us for a quote today. We will be happy to custom-design and build a Slip-On Firefighting Unit to meet your unique requirements. polypropylene tank spare tire bracket 26 hp diesel pump & engine hose tray equipment boxes liquid level indicators aluminum electric hose reel foam flo foam proportioning unit End-mount slip-on unit built for Oregon Military department SLIP-ON FIREFIGHTING UNITS 2 n CASCADE FIRE EQUIPMENT COMPANY GSA SCHEDULE GS-07F-0275Y standard features Standard Slip-on Equipment on every full-size Slip-On firefighting unit includes a polypropylene tank, 18HP centrifugal pump, electric rewind Hose Reel, stainless steel control panel, full flow all stainless steel plumbing, diamond plate surface, and additional standards listed below. Light Vehicle unit specifications on page 8. polypropylene tank ƒƒ Made from ½” non-corrosive stress relieved, UV stabilized thermo-plastic ƒƒ Fully baffled ƒƒ 2” suction sump ƒƒ Combination vent/manual fill towers ƒƒ Vertical translucent panel sight gauges See specifications on page 9 ALUMINUM FRAME 2” square tubular frame fully supports the tank and platform. The areas between the interior framing never exceeds 540 square inches. Includes flanges for mounting on your truck bed. DIAMOND PLATE Surface is covered with .125 aluminum diamond plate. All edges are turned 1” welded and finished. End-mount platforms are also covered with edges turned 3” welded and finished. 18hp cf-120 pump ƒƒ Meets the volumes and pressures needed in wildlland firefighting ƒƒ Powered by an 18hp Briggs & Stratton Vanguard engine ƒƒ 12-volt electric starter ƒƒ Rated 110 GPM at 100 PSI, 80 GPM at 200 PSI and 23 GPM at 300 PSI. More information on page 13 control panel Consolidates pump and engine controls at operators’ position. panel light hour meter WINTERIZATION liquid-filled pressure gauge primeR automatic SHUT OFF switch ENGINE choke STARTER switch ENGINE throttle hannay HOSE reel ƒƒ Painted steel booster reel ƒƒ Independent ball shut-off ƒƒ Electric rewind ƒƒ Comes with 200’ of ¾” ID coupled hose in 100’ lengths ƒƒ Includes combination fog/straight stream shut-off nozzle ADDITIONAL STANDARDS ƒƒ Full flow all Stainless Steel plumbing ƒƒ All stainless steel fasteners/brackets ƒƒ Fire service grade slip-out style valves ƒƒ Electric primer ƒƒ Camozzi fittings ƒƒ Stainless steel bolts threaded into brass inserts secure all components to tank top and platform ƒƒ 1” polypropylene pumper board ƒƒ Non-slit corrugated loom covering all water and foam auxiliary lines ƒƒ Winterization system ƒƒ Complete installation kit and instruction manual STANDARD SLIP-ON FEATURES CASCADE FIRE EQUIPMENT COMPANY n 3 GSA SCHEDULE GS-07F-0275Y end mount style slip-ons End-Mount Slip-On Units generally have a lower center of gravity than Top-Mount Units. The controls, pump, plumbing and sometimes reel are mounted on a platform at the rear of the water tank. The tank and rear platform are supported by a frame that is constructed from a 2” tubular aluminum and welded into a high-strength, non-corrosive unit. The tank platform is covered by a .125” aluminum diamond plate with a 1” return on top, 3” return on bottom platform, and welded corners. End-Mounts are great for trucks with utility boxes or flatbeds. We can also build custom boxes to fit your Slip-On package. Detailed specifications and custom-built units are available upon request. Numerous options are also available, as shown in the table at right. Larger sizes available. Please call for quotes. END MOUNT WEIGHTS & PRICES Prices shown include installation at time of purchase. For detailed information on the optional Slip-On equipment, see pages 6-7. GALLON EMPTY FULL PART CAPACITY WEIGHT WEIGHT PRICE spare tire bracket End Mount unit built for US Forest Service 24120 125 gal 700 1700 13,630.23 24121 150 gal 725 1970 13,809.57 24123 200 gal 775 2435 14,302.77 24124 250 gal 825 2900 14,594.21 24125 300 gal 875 3365 15,647.86 24127 400 gal 1025 4345 17,037.78 OPTIONAL EQUIPMENT PART foam flo™ foam proportioning unit hose roller guide 18 hp pump & engine aluminum electric hose reels DESCRIPTION ADD 85.19 11564P Suction Hose 10’ x 2” (Used on 18 hp Pump) 11685P Aluminum Reel 11914P Foam-Pro 1601 with Foam Cell 4,618.14 11923P Foam-FloTM with Foam Cell 1,071.59 11925P Wildland Monitor with 1.5” NPT Female 1,049.17 23953P Foot Valve and Strainer 2” 24065P Chrome Hose Roller Guides on Reel, Double 358.69 24066P Chrome Hose Roller Guides on Reel, Single 179.35 24068P Live Hose Tray for 200’ of Hose 24082P Spare Tire Bracket 24083P Hydrant Fill 1.5” 420.56 24083-2.5P Hydrant Fill 2.5” 659.09 399.04 152.44 1,138.84 327.30 551.49 24192P 23 hp Centrifugal Pump & Engine 24193P CFE 26hp Diesel High Pressure Pump 25012P IntelliTank Water Level Gauge 403.53 25013P IntelliTank Foam Level Gauge 403.53 7,980.86 End Mount unit built for Louisiana State Forestry liquid level indicators CFE Demo 2012 END MOUNT STYLE SLIP-ONS 4 n CASCADE FIRE EQUIPMENT COMPANY equipment boxes GSA SCHEDULE GS-07F-0275Y top mount style slip-ons Top-Mount Slip-Ons incorporate all components on the top of the tank. This configuration takes up less space in the bed, leaving room for other cargo. Top-Mounts are ideal for a standard pick-up bed and/or low-profile utility boxes with the option of extending components to the edge of the boxes. The Control Panel can either be on the driver’s side or at the rear. Detailed specifications and custom-built units are available upon request. top MOUNT WEIGHTS & PRICES Numerous options are also available, as shown in the table at right. GALLON EMPTY FULL Larger sizes available. Please call for quotes. PART CAPACITY WEIGHT WEIGHT PRICE aluminum electric Top Mount unit built 24156 125 gal 700 1700 13,630.23 hose reel for US Army 24157 150 gal 725 1970 13,809.57 Fort Jackson. 24158 200 gal 775 2435 14,302.77 24159 250 gal 825 2900 14,594.21 24160 300 gal 875 3365 15,647.86 24163 400 gal 1025 4345 17,037.78 PART foam flo™ foam proportioning unit steel electric hose reel hose roller guides Top Mount unit built for Payette National Forest. OPTIONAL EQUIPMENT DESCRIPTION ADD 85.19 11564P Suction Hose 10’ x 2” (Used on 18 hp Pump) 11685P Aluminum Reel 11914P Foam-Pro 1601 with Foam Cell 4,618.14 11923P Foam-FloTM with Foam Cell 1,071.59 11925P Wildland Monitor with 1.5” NPT Female 1,049.17 23953P Foot Valve and Strainer 2” 152.44 24065P Chrome Hose Roller Guides on Reel, Double 358.69 24066P Chrome Hose Roller Guides on Reel, Single 179.35 24068P Live Hose Tray for 200’ of Hose 24082P Spare Tire Bracket 24083P Hydrant Fill 1.5” 420.56 24083-2.5P Hydrant Fill 2.5” 659.09 399.04 1,138.84 327.30 24192P 23 hp Centrifugal Pump & Engine 24193P CFE 26hp Diesel High Pressure Pump 551.49 7,980.86 25012P IntelliTank Water Level Gauge 403.53 25013P Intellitank Foam Level Gauge 403.53 Prices shown include installation at time of purchase. For detailed information on the optional Slip-On equipment, see pages 6-7. liquid level indicators equipment box Top Mount unit built for Capstone Fire Management. TOP MOUNT STYLE SLIP-ONS CASCADE FIRE EQUIPMENT COMPANY n 5 GSA SCHEDULE GS-07F-0275Y Optional Slip-on Equipment Some of the most popular options are shown on these two pages. On some of the smaller units space may not allow for installation of all options. The options shown are priced installed on the Slip-On at time of purchase. HOSE REEL options LIQUID LEVEL GAUGES Hose Reel options are available, such as aluminum reels. Chrome Hose Roller Guides speed the handling of the hose and reduce wear and damage. The rollers can be installed on one or both sides of the reel in either a High or Low configuration. Get level readings at a glance with the IntelliTank Foam and Water Gauges for End-Mount Units, or the MC Liquid Level Gauge for Top Mount Units. PART DESCRIPTION PART DESCRIPTION PRICE* PRICE* 25012P IntelliTank Water Level Gauge 403.53 403.53 11685P Aluminum Reel ADD 399.04 25013P IntelliTank Foam Level Gauge 24065P Chrome Hose Rollers with Double Brackets ADD 358.69 24066P Chrome Hose Rollers with Single Brackets ADD 179.35 *Price includes installation on slip-on 11687P Motor: 12 Volt 1/2 hp substitute for 1/3 hp ADD 85.19 11679P Motor: 12 Volt 2/3 hp substitute for 1/3 hp ADD 112.09 11655E EF-4000 Electric Mini Reel - substitute - aluminum electric hose reel Included *Add this amount to price of slip-on 26HP diesel pump & engine hose tray foam pro foam system hydrant fill liquid level gauges Hydrant fill cf-126 diesel Pump & engine The hydrant fill comes standard with a 1½” fire service slip-out valve and customer’s choice of 1½” male NST with cap or 1½” female swivel with plug. This PART DESCRIPTION PRICE fill provides quick refill from a 24083P 1.5” Hydrant Fill 420.56 hydrant or water tender. High pressure centrifugal pump powered by a Kabota engine. In-line 3 cylinder, water-cooled, overhead valve delivering a maximum output of 26.5 hp @ 3600 RPM, 58.1 cubic inches displacement, 4-cycle, diesel fueled. Body and head are made of high-strength aluminum alloy, anodized for superior corrosion resistance. Impeller is made of high-strength, corrosion resistant bronze, fully enclosed, double-hubbed to balance hydraulic thrust, mechanically-balanced to PERFORMANCE FOR 24193 eliminate vibration. Municipal PSI 50 125 200 250 325 panel comes standard. High GPM 118 105 80 62 26 Volume pump also available. 24083-2.5P 2.5” Hydrant Fill 659.09 HOSE TRAY The Hose Tray is constructed from heavy aluminum diamond plate. The hinged top allows for easy loading of the hose, and the hinged and latched doors on the ends keep your hose and nozzle inside. A turtle tile base ensures proper ventilation. A rotary joint enables hose removal from either side, and the full-flow ball valve controls the water flow. This standard Hose Tray accommodates 200’ of 1½” hose. PART DESCRIPTION PRICE 24068P Hose Tray (Hose not included) PART size wT 33.8” x 19.1” x 24.4” 265 lb. PRICE* ADD 7,980.86 NOTE: *Price to substitute Diesel for Standard CF-120 Pump 1,138.84 OPTIONAL SLIP-ON EQUIPMENT 6 n CASCADE FIRE EQUIPMENT COMPANY DESCRIPTION 24193P 26 hp Diesel Pump GSA SCHEDULE GS-07F-0275Y Optional Slip-on Equipment 23 hp pump & motor FOAM PRO 1601 The CF-130 (Part No. 24192) is a centrifugal pump powered by a 23 hp Briggs & Stratton Vanguard Engine. The engine has a manual recoil and a 12-volt electric starter. This FoamPro® leads the industry with proven reliability, and provides the smoothest proportioning available at low flows for the best foam generation for slip-on pumper units and smaller forestry pumpers. This Foam Injection unit provides fully automatic foam proportioning regardless of changes in flow or pressure, delivering unmatched accuracy over the entire range of flow. The unit proportions continuously and has a discharge side injection, keeping foam out of the fire pump. Includes a D.C. driven foam pump and Control module with On/Off control, foam percentage selector, and low concentrate warning indicator. Installs easily in new or existing apparatus and can be used with all Class A concentrates. Delivers 0.1 to 1.7 gpm (.38 to 6.4 L/min) of concentrate. PERFORMANCE FOR CF-130 PUMP PSI GPM 100 125 150 175 200 225 250 275 300 325 132 130 120 108 100 90 80 60 47 15 24192P CFE-130 23HP Pump & Motor ADD 551.49 , cascade s wildland monitor Cascade’s Wildland Monitor was designed specifically for water tankers and pumpers where discharges of 350 GPM or less is required. This is an ideal Monitor for discharging water or Class A foams in wildland firefighting. The unit has a 360° horizontal travel and 140° of horizontal movement. Locking knobs allow for the Monitor to be locked in any position. The 1½” waterway is epoxy coated inside and out for protection from corrosion and wear. Discharge threads are 1½” NH male thread. The Monitor weighs only 20 lbs., is 18” high and 11” wide. Includes 1½” Shut-Off Valve and Stainless Steel Plumbing. 11925P Cascade’s Monitor Installed on Slip-On 1,049.17 electric steel reel (standard) with dual hose roller guides 11914P FoamPro ®1601, Installed with Foam Cell 4,618.14 FOAM-FLOTM The Foam-Flo™ is an inexpensive device for proportioning Class A Foam into the hose line. This device takes a small amount of water from the discharge side of the pump and picks up foam concentrate from the foam supply, then feeds the foam solution into the suction side of the pump. A selector valve controls the percentage of foam metered into the pump. The range that can be selected is from .01% to 1%. The foam concentrate is stored in a separate compartment in the main Slip-On tank. The standard foam tank size is 15 gallons with other sizes available. 11923P Foam-Flo™ Installed w/Built-in Foam Cell 1,071.59 spare tire bracket wildland monitor By adding a spare tire bracket to the top of your tank, you can increase the amount of available space in your truck bed and easily access your spare. 24082P Spare Tire bracket 327.30 spare tire bracket foam flo™ foam proportioning unit OPTIONAL SLIP-ON EQUIPMENT CASCADE FIRE EQUIPMENT COMPANY n 7 GSA SCHEDULE GS-07F-0275Y light vehicle & atv style slip-ons Cascade’s compact Slip-On Firefighting Units are just what your department needs to convert your lightweight patrol vehicles or ATV units into fast-attack firefighting instruments. The condensed top-mount design leaves plenty of payload space, and every unit is designed according to your specifications. standard equipment TANK Our polypropylene tanks are fully baffled and meet USDA specifications No. 5100-343b. Tank specifications on page 9. METAL MASTERS HOSE REEL Open spoke reels constructed of welded steel. Proven durability yet light in weight. A double row of ball bearings give the joint a rated working pressure of 600 PSI. Fully adjustable brake is anchored to a preloaded compression spring, which will greatly smooth out the drag when unreeling hose. Hose reel comes with 200’ of ¾” Booster Hose, coupled with aluminum reusable couplings. cascade,s super mini-PUMP A close-coupled single stage centrifugal pump with lightweight aluminum alloy pump parts. Pump parts are anodized for corrosion resistance. Pump is powered by a small and lightweight 6.5hp Briggs and Stratton engine that meets the current emissions standards of the US EPA. The pump has a US Forest Service approved spark arrestor, inlet and outlet protective caps, and a hand primer. Pump is capable of pumping foam and retardant solutions. More specs on page 14. metal masters hose reel super minipump steel booster reel be pump PLUMBING All Stainless steel plumbing with 1” full flow piping and high pressure hoses. An 1” overboard suction port is provided to allow drafting from auxiliary water sources. Unit also has a 1½” discharge. Each unit has a pressure relief valve for optimum pressure. An automatic shut-off stops the engine when the water supply has been exhausted, preventing damage to the pump. OPTIONAL EQUIPMENT EF-4000 electric mini-REEL This compact “mini” reel is ideal for use in restricted spaces or on slip-on units. It is wellsuited for use in brush and forest firefighting vehicles. Hose reel comes with 100’ of ¾” booster hose. foam flo HANNAY ELECTRIC REWIND STEEL BOOSTER REEL This dependable, rugged reel has set the standard for fire service reels for more than 50 yeasrs. Inlet is 1” female NPT 90° swivel joint rated at 1000 PSI. Holds 200 feet of booster hose. For slip-ons where size allows. BE PUMP The BE pump has a 6.5HP Vanguard with electric start. This positive displacement pump is self-priming. The bronze pump housing has compound celcon impellers and discharges 11gpm AT 50 psi, 9 gpm at 150 psi, and 8 gpm at 200 psi. FOAM-FLO An inexpensive device for proportioning Class A Foam into the hose line. The foam concentrate is stored in a separate compartment in the main Slip-On tank. The standard foam tank size is 15 gallons with other sizes available. Not available with BE pump. TM mini control panel Stainless Steel control panel has been designed to place the controls in one convenient location for the operator. Includes a panel light, electric valve for primer, pressure gauge, engine On/Off light and switch, engine starter switch, engine throttle control, and automatic shut-off switch. LIGHT & ATV WEIGHTS & PRICES GALLON PART CAPACITY 24052 50 gal EMPTY WT. FULL WT. PRICE 300 700 6,949.62 24046 75 gal 350 972 7,128.97 24048 100 gal 400 1239 7,433.85 24050 125 gal 425 1462 7,711.84 optional equipment optional equipment LIGHT & ATV STYLE SLIP-ON UNITS 8 n CASCADE FIRE EQUIPMENT COMPANY electric mini-reel mini control panel ADD 11663S EF-24-23-24 Electric Steel Reel 892.24 11655E EF-4000 Electric Mini-Reel 659.09 BE Pump - substitute No additional charge Foam-Flo™ Installed w/Built-in Foam 11923P 1,071.59 Cell (not available with BE pump) 24062 Mini Control Panel 544.08 24019 GSA SCHEDULE GS-07F-0275Y polypropylene tanks Polypropylene Tanks are ideal for use as water tanks for Slip-On Firefighting Units. One great advantage for these tanks is their versatility: they can be manufactured in a wide variety of configurations, dimensions and sizes without adding significantly to the cost. WT 31000 50 Gallon Tank 31001 60 Gallon Tank 178 lbs. 2152.14 31003 100 Gallon Tank 203 lbs. 2286.65 31004 150 Gallon Tank 253 lbs. 2824.69 31005 200 Gallon Tank 303 lbs. 3048.87 31002 75 Gallon Tank ƒƒ Constructed of ½” thick polypropylene sheet stock: non-corrosive stress relieved thermo-plastic, natural black in color and U.V. stabilized. 31006 250 Gallon Tank 353 lbs. 3317.88 31007 300 Gallon Tank 403 lbs. 3766.25 31008 400 Gallon Tank 503 lbs. 5021.66 31009 500 Gallon Tank 603 lbs. 7084.13 ƒƒ Materials used are compatible with fire fighting foams, retardants and wetting agents, and meet FDA requirements for potable water. ƒƒ All joints and seams are extrusion double welded and tested for maximum strength and integrity. ƒƒ Transverse baffle partitions are manufactured of ½” stock of the same material and extend from the floor of the tank to the cover to allow for positive welding. ƒƒ All partitions equipped with vent and air holes to permit movement of air and water between compartments, and are designed to provide maximum water flow. ƒƒ All baffle partitions interlock with one another and are welded to each other, and to the walls of the tank. ƒƒ Tank fill connections are backed with flow deflectors to diffuse the stream entering the tank. ƒƒ End wall of tank has vertical translucent panel sight gauge. ƒƒ Tank has a combination vent and manual fill tower constructed of ½” polypropylene and with a ¼” thick, removable polypropylene screen and a polypropylene stainless steel hinged cover. PRICE 153 lbs. 1883.12 163 lbs. 2017.63 WATER TANK FEATURES ƒƒ Fill tower with removable screen & cover ƒƒ Sump with anti-swirl plate & drain fitting ƒƒ Vent overflow pipe ƒƒ 1” NPT tank fill fitting ƒƒ 2” NPT tank suction fitting ƒƒ Sight gauge foam TANK FEATURES ƒƒ One(1) fill tower with removable screen & cover ƒƒ One(1) sight gauge ƒƒ Drain 31010 600 Gallon Tank 703 lbs. 7173.80 31011 700 Gallon Tank 803 lbs. 7891.18 31012 750 Gallon Tank 853 lbs. 8070.53 31013 800 Gallon Tank 903 lbs. 8249.87 OPTIONS 31014 31015 31016 31017 31018 31019 31020 31022 31023 31026 5 Gallon Foam Cell 10 Gallon Foam Cell 15 Gallon Foam Cell 20 Gallon Foam Cell 30 Gallon Foam Cell 40 Gallon Foam Cell Reel Mount Blocks (2) Misc. Mount Block (feet) Wheel Wells Diamond Plate (per sq ft) ADD 470.78 520.10 564.94 591.84 699.45 807.05 148.86 22.42 538.04 31.39 Tank sizes are rectangular and measurements are custom-configured to fit your specifications. ƒƒ Each tank is equipped with an anti-cavitation device. Lightweight slip-on units mounted on ATVs. POLYPROPYLENE TANKS CASCADE FIRE EQUIPMENT COMPANY n 9 GSA SCHEDULE GS-07F-0275Y WILDLAND MONITOR Cascade’s Wildland Monitor is designed specifically for water tankers and pumpers where discharges of 350 GPM or less are required. It is an ideal monitor for discharging water or Class “A” foams in wildland firefighting. The unit has a 3600 horizontal travel and 1400 of vertical movement. Locking knobs give you the flexibility to secure the monitor in any position. The 1½” waterway is epoxy coated both inside and out to protect from corrosion and wear. The discharge threads are 1½” NH male thread, which can be used with a variety of nozzles and tips, sold separately. The Monitor weighs only 20 lbs. and it measures 18” high and 11” wide.The truck-mount style monitor is designed to be bolted directly to your vehicle body. It is supplied with water through a 1½” hose line. The monitor can be removed from the base when not in use by means of a solid steel hitch pin and clip. Wildland Monitor comes with a choice of four base options: cascade’s wildland monitor 11925 1½” ASA Flange 11925M 1½” NPT Male 11925 Monitor with 1½” ASA Flange 453.50 11925F Monitor with 1½” NPT Female 460.38 11925M Monitor with 1½” NPT Male 11925TM Monitor with Truck Mount Base 11925F 1½” NPT Female 460.38 495.48 End Mount Slip-on unit with installed Wildland Monitor and Foam-Flo™ foam proportioning unit. 11925TM Truck Mount Base NOTE: Tip not included with Monitor. foam-flo foam proportioning meter foam-flotm Front view Back view Foam-Flo™ foam proportioner meters wildland (class A) foam concentrate into hose lines in the desired percentages. The Foam-Flo™ can treat up to 100 GPM or as low as 5 GPM of water. Foam concentrate can be metered into the hose lines in various amounts, from .01% to 1%. Easily installed on Slip-On Units, portable pumps or pumpers. There are three hoses, one is attached to the pump suction, the second hose attaches to the pump discharge and the third to the foam concentrate. An integrated ball check valve prevents water from entering the foam supply. All components are anodized aluminum, brass or stainless steel, and the label is a tough waterproof vinyl. The unit measures 6½” x 3” x 1¼” and weighs 2 lbs. All hoses and fittings included. NOTE: the Foam-Flo™ is not for use with positive displacement pumps. There are two models: ƒƒ The 11923A model is made to install on portable pumps. This model has garden hose fittings on all three connections. The foam pick up hose is supplied, the other two hoses are not. ƒƒ The 11923F model has a garden hose thread on the foam pick. The other two connections are quick connects. This model is ideal when the Foam-Flo™ is permanently installed on a Slip-On or Pumper. Bracket is standard. WILDLAND MONITOR - FOAM-FLOTM 10 n CASCADE FIRE EQUIPMENT COMPANY Foam-FloTM for Portable Unit Quantity discount, 10+ Foam-FloTM for Permanent Unit 11923F Quantity discount, 10+ 11923A 338.80 321.69 354.56 336.65 See page 15 for Foam Flo™ Nozzles GSA SCHEDULE GS-07F-0275Y aqua-puncture Ideal for fires in: Attics Trailers Mobile Homes Confined areas Sawdust and Trash Cascade’s Aqua-Puncture is a piercing applicator that is ideal for fighting fires in attics, trailers, mobile homes, or other confined Removable Stainless Steel Applicator Head areas. The hardened stainless steel head easily penetrates sheet-rock, plywood, and light metals. The head discharges 95 GPM at 100 PSI. The orifices in the head have been hydraulically 10113 - 48” size engineered to provide a dense fog, which allows for greater heat absorption. The Aqua-Puncture works well with Class A and B Foams. In order to provide a lightweight-yet-strong tool, the shaft 10114 - 48” size with is constructed from aircraft aluminum with a wall thickness of ¼”. sledge butt end It has knurled areas for a “no-slip grip.” The shaft and swivel are hard coated anodized for added protection. The Aqua-Puncture is available in two lengths: 48” and 72”. The 36” Extension 48” model weighs 7 lbs. and the 72” model is 9 lbs. Both sizes have a 1½” swivel inlet. Both also available with a sledge-butt end. g g 10112 Aqua-Puncture, 72” 310.43 10113 Aqua-Puncture, 48” 288.94 10114 Aqua-Puncture, 48” w/ Sledge Butt End 338.29 10115 Aqua-Puncture, 72” w/ Sledge Butt End 358.98 10116 Aqua-Puncture, 36” Extension 131.34 g g 1½ ” NH Female Swivel wildland foam suppressant Phos-Chek WD 881 Class A foam was introduced over 20 years ago and has been widely used by government agencies around the world who are responsible for municipal, wildland, and industrial fire management. Phos-Chek WD 881 Class A foam concentrates continues to be the product of choice based on unparalleled superior performance. Tested and approved for use by the U.S. Forest Service. The U.S. Forest Service tests for corrosion properties along with environmental, safety and health testing. These tests ensure that the product is safe for the personnel who use it and safe for the environment. Testing also ensures that the product will not deteriorate equipment, apparatus, or aircraft used to mix or apply the product. Phos-Chek WD 881 is a UL Listed Wetting Agent, passing the UL test requirements at a very low use rate of 0.1%. WD 881 is significantly more concentrated than many other products currently available and can be used at much lower rates. Phos-Chek Class A foam concentrate is specifically formulated uses of wildland foam to make water more effective. The unique combination of surfactants significantly reduces water’s surface tension, creating a superior foam ƒƒ Direct application on the flame front for rapid “knockdown” blanket when mixed with air that surrounds fuels with a thick layer of ƒƒ Heavy foam blanketing in front of approaching fires where it is unsafe to reach the fire water. This creates a barrier between the fuel and the fire and allows fire fighters to see application areas. Foam and water knocks down fire ƒƒ Reinforcement of mineral soil fire lines or natural barriers faster than water alone. Phos-Chek WD 881 performs exceptionally well ƒƒ Penetration and fire stoppage in litter, punkie logs, etc. in all foam application equipment including Compressed Air Foam (CAFS) ƒƒ Structure protection systems. Available as pallet of 48 5-gal pails ONLY. ƒƒ Prescribed burns 21031-48 WD 881 Foam - Pallet of 48 5-gal. pails 4,230.89 AQUA-PUNCTURE - CLASS A FOAM CASCADE FIRE EQUIPMENT COMPANY n 11 GSA SCHEDULE GS-07F-0275Y HALE FYR FLOTE FLOATING PUMP Make the most of wildland water sources! The Fyr Flote is a lightweight, portable centrifugal pump mounted on an unsinkable, high-strength polyethylene float with dual carrying handles and a splash suppression collar. A high-volume model (24010) and a high-pressure model (24011) meet most every pump need — in as little as four inches of water. The Fyr Flote stores easily in most truck compartments. It includes an automatic recoil starter, a spark arresting muffler, and an engine overspeed control switch. ƒƒ Suction has easily removable oversized screen ƒƒ Patented floating bronze clearance ring for minimum clearance, prevents rubbing, seizing, and alignment problems ƒƒ Pump shaft is protected against corrosion by a bronze sleeve ƒƒ Self-adjusting and self-lubricated Shaft Seal, using a special ceramic seat for wear and shock resistance ƒƒ Exclusive auto prime system works without a suction hose ƒƒ Dimensions: 28.25”L x 20”W x 16”H ƒƒ Weight: 49 lbs. high volume PERFORMANCE PSI 10 high pressure PERFORMANCE pump SPECIFICATIONS TYPE SUCTION DISCHARGE head VOLUTE IMPELLER pump shaft shaft seal PRIMing Engine’s vertical shaft Self-adjusting, self-lubricated, ceramic seat Auto prime system ENGINE SPECIFICATIONS make type HORSEPOWER cooling starting air filter fuel filter U.S. Motor Power Inc. Single cylinder, two-cycle gasoline 8 hp at 7,000 RPM Forced air Water-resistant, solid state ignition Wire mesh protects against impurities 75 micron in-line with fuel strainer built in to the fuel pump MAX FLOW MAX PRESSURE 24010 High Volume Fyr Flote Pump 150 GPM 130 PSI 70 GPM 175 PSI 75 100 PSI 25 75 100 150 24011 HIgh Pressure Fyr Flote Pump GPM 150 115 80 45 GPM 65 50 45 24011 Fyr Flote 3+ Quantity 2,929.27 2,830.85 24010 Fyr Flote 3+ Quantity 50 20 Centrifugal, bolted to engine 2”, non-threaded, with easily removable oversized screen 1.5” NST Male Lightweight, high strength, corrosion resistant aluminum alloy High strength aluminum alloy with machined waterways for maximum performance Bronze enclosed type for maximum efficiency 2,929.27 2,830.85 MINI-PUMPS CF Mini-pump CF super Mini-pump Cascade’s Mini-Pump unit is designed for use on lightweight slipon units that require foam pumping capabilities. This pump is powered by a small and lightweight 4-stroke Honda engine that meets the current emissions standards of the US EPA. The MiniPump also features a US Forest Service approved spark arrestor, inlet and outlet protective caps, and hand primer. Pump is capable of pumping foam and retardant solutions. The CF Super Mini-Pump is a close-coupled single stage centrifugal pump with lightweight aluminum alloy pump parts. Pump parts are anodized for corrosion resistance. Pump is powered by a small and lightweight 6.5hp Briggs and Stratton engine that meets the current emissions standards of the US EPA. The pump has a US Forest Service approved spark arrestor, inlet and outlet protective caps, and hand primer. Pump is capable of pumping foam and retardant solutions. 24016 CF Mini-Pump and Engine 1,432.75 SPECIFICATIONS ENGINE STARTER SUCTION DISCHARGE SIZE WEIGHT PSI GPM 24026 CF Super Mini-Pump and Engine 1,989.92 SPECIFICATIONS Honda 2.5HP at 3600 RPM 4 Stroke, 1 Cylinder, Air Cooled Manual recoil and electric 1½” 1½” 15¾” L X 10¾”W X 15⁵⁄₈”H 19.3 lbs. pump performance 0 26 57 85 68 50 25 Shutoff FLOTO-PUMPS - MINI-PUMPS 12 n CASCADE FIRE EQUIPMENT COMPANY ENGINE Briggs & Stratton 6.5HP at 3600 RPM 4 Stroke, 1 Cylinder, Air Cooled STARTER Manual recoil and electric SUCTION 1½” DISCHARGE 1½” SIZE 18” L X 18”W X 16”H WEIGHT 59 lbs. pump performance 25 50 100 PSI 90 86 38 GPM GSA SCHEDULE GS-07F-0275Y CENTRIFUGAL PUMPS DIMENSIONS LENGTH WIDTH HEIGHT Dependable Trouble-free Portable g 30.25” (24” w/out carry frame) CF-120 - 18HP 19.5” 18.5” (17.25” w/out carry frame) SPECIFICATIONS TYPE SUCTION DISCHARGE VOLUTE/ BODY IMPELLER WEAR RING SEAL BEARINGS PRIMER Single Stage Centrifugal 2” NPSH Male 1.5” NH Male High strength aluminum alloy, hard coat anodized for extra corrosion resistance Fully enclosed all bronze construction, double hubs to balance hydraulic thrust, balanced to prevent vibration Bronze, long-wearing and easily replaced Carbon/ceramic mechanical Sealed Ball Bearings Manual ENGINE SPECIFICATIONS ENGINE OUTPUT STARTER LUBE 24191 Briggs & Stratton Vanguard V Twin aircooled, overhead valve design. 3600 RPM, 4 Cycle 12 Volt Electric & Manual Recoil Full pressure lubrication system with automotive style filter CF-120 18hp Pump, Carry Frame 3,979.05 24191T CF-120 18hp Pump, Truck Mount Base 4,059.45 24192 CF-130 23hp Pump & Motor 4,139.04 24193 CF-126 26hp Diesel Pump & Motor 7,622.17 cascade's hand primer Cascade’s Hand Primer is used to prime pumps. A 1½” NH female fitting is attached to 1½” discharge to bring water up from the source and through the pump to discharge. ƒƒ Made from tough, anodized aluminum ƒƒ T-handle for an easy grip ƒƒ Knurled end for ease of attachment to male thread ƒƒ Length: 12½” ƒƒ Weight: 1¾ lb. 24017 Hand Pump Primer g 89.63 Designed and manufactured by Cascade Fire Equipment, the CF-120 is a pump ideally suited for use on Slip-On Units or as a high pressure, lightweight portable pump. The CF-120 can pump up to 120 GPM and up to 300 PSI. The pump weighs 140 lbs. and when equipped with a carrying base and integrated gas tank it makes a very good portable pump. ƒƒ 18hp Briggs & Stratton engine drives the pump ƒƒ Meets the volumes and pressures needed in 24191T Pump with Truck Mount Base wildland firefighting ƒƒ Provides trouble-free service under firefighting conditions ƒƒ Replacement parts available at a reasonable price with easy installation ƒƒ Available as a portable pump with carrying frame, integrated 3-gallon gas tank, hand primer, and liquid-filled pressure gauge ƒƒ Truck mount model has a 3/4” thick polypropylene mounting base, remote 4-gallon gas tank with fuel line, and quick-connect hand primer 24191 Pump with Carry Frame PERFORMANCE FOR CF-120 PUMP 50 100 150 200 250 300 PSI 110 100 80 50 23 GPM 120 CF-130 - 23HP Powered by a 23 hp Briggs & Stratton Vanguard Engine. The engine has a manual recoil and a 12-volt electric starter, the increase in horsepower over the CF-120 means more volume and higher pressure. PERFORMANCE FOR CF-130 PUMP PSI 100 125 150 175 200 225 250 275 300 325 GPM 132 130 120 108 100 90 80 60 47 15 24192: more volume, higher pressure CF-126 - 26HP The CF-126 (Part No. 24193) is a high pressure centrifugal pump powered by a 26hp diesel Kubota engine. The engine is an in-line 3 cylinder, watercooled, overhead valve delivering a maximum output of 26.5 hp @ 3600 RPM, 58.1 cubic inches displacement, 4-cycle, diesel fueled. Body and head are made of high-strength aluminum alloy, anodized for superior corrosion resistance. Impeller is made of high-strength, corrosion resistant bronze, fully enclosed, double-hubbed to balance hydraulic thrust, mechanically-balanced to eliminate vibration. 24193: high pressure powered by Municipal panel comes standard. a diesel engine Performance for cf-126 pump 100 125 200 250 325 PSI 50 112 105 80 62 26 GPM 118 High Volume pump also available. CENTRIFUGAL PUMPS - HAND PRIMER CASCADE FIRE EQUIPMENT COMPANY n 13 GSA SCHEDULE GS-07F-0275Y DURA-BUILTtm HOSE DURA-built 800tm HOSE TEST PART SIZE PRES COIL 50’ DIA WGT CPLD 11504 1½” 800 19” 18 lb 162.46 11505 1¾” 800 19½” 20 lb 180.61 11506 2½” 800 21” 34 lb 262.30 11507 3” 800 22” 42 lb 343.98 Because it’s the best, it is available only with UltraShield impregnation. This 100% synthetic hose uses entangled filament yarns and is the result of the latest technology and research. It is lightweight, flexible and easy to handle, yet withstands the rugged requirements of today’s modern firefighting. It is available in 800 PSI Hydrostatic test. Standard lengths are 50 feet, with lightweight couplings, but 75-foot and 100-foot lengths are also available. ƒƒ Lightweight ƒƒ 100% synthetic ƒƒ Double jacket ƒƒ Resists moisture absorption ƒƒ Ultra-Shield impregnated ƒƒ 100% Ozone resistant tube ƒƒ No drying required DURA-FLOW 800tm HOSE TEST PART SIZE PRES 11584 1½” 800 COIL 50’ DIA WGT CPLD 16” 13 lb 162.46 11585 1¾” 800 16” 15 lb 180.61 11586 2½” 800 17” 23 lb 262.30 11587 3” 800 17” 26 lb 343.98 This super lightweight hose is constructed of premium quality, abrasion resistant materials, quality tested before, during, and after manufacturing. DURAFLOW™ utilizes high strength, low stretch filament yarns producing a highly abrasion resistant lightweight attack hose. The thermoplastic lining eliminates ozone deterioration found in look-alike hoses. DURA-FLOW™’s greater flexibility makes it resistant to kinking and more maneuverable.It’s lightweight design requires less storage space. ƒƒ Super lightweight ƒƒ 100% synthetic ƒƒ Double jacket ƒƒ Kink resistant ƒƒ Ultra-Shield impregnated ƒƒ Thermoplastic liner ƒƒ No drying required Special Ultra-Shield coating color is YELLOW. Optional colors avalable on request: OUTBACK 600tm FORESTRy HOSE PART HOSE SIZE TEST COIL PRES DIA WGT CPLD 11544-50 1”x50’ 600 PSI 11544-100 1”x100’ 600 PSI 11545-50 1½”x50’ 600 PSI 11545-100 1½”x100’ 600 PSI 15½” 15½” 4 lb 114.36 8 lb 209.66 6½ lb 132.51 12½ lb 242.33 OUTBACK 600™ has a 100% polyester jacket with an extremely fine twill weave to improve abrasion resistance and to resist snagging. The hose is totally immune to the effect of mildew and incorporates an extruded polyurethane liner which is a minimum thickness of .011” thick, but has a tensile strength of 3000 PSI. Available in 50 Ft. or 100 Ft. lengths with yellow Ultra-Shield high-tech polymer impregnation to improve abrasion and moisture resistance. An ideal hose where weight and space are of primary concern as it occupies less than half the space of conventional forestry hose and is over 50% lighter in weight. HOSE 14 n CASCADE FIRE EQUIPMENT COMPANY ƒƒ 100% polyester jacket ƒƒ Immune to mildew ƒƒ Extruded polyurethane liner ƒƒ Resistant to abrasion ƒƒ Extremely lightweight ƒƒ Very flexible NOTE: When ordering, please specify type of couplings. OUTBACK 600, is available with NH, NPSH or Quarter-Turn Couplings GSA SCHEDULE GS-07F-0275Y NOZZLES RANGER PLUS The Ranger Plus Nozzle has all the features of the standard Ranger Nozzle plus a heavy-duty bumper. The bumper provides protection to the nozzle and makes stream selection much easier, especially when wearing gloves. The bumper is equipped with teeth, which gives a more solid fog pattern than the standard Ranger Nozzle Tip. 1” Nozzle flows 10/30. The 1½” size has a low flow of 20 GPM and a high flow of 60 GPM. 10921 1” Tip 10/30 GPM 10 oz 89.47 10902 1½” Tip 20/60 GPM 14 oz 104.38 SINGLE GALLONAGE NOZZLES These lightweight hard anodized nozzles are engineered to provide an excellent fog pattern and straight stream. The nozzles also have a twist shut-off for efficient control. The heavy neoprene bumper provides good protection from physical damage. The molded teeth makes the fog pattern very dense without a hollow center. 89.47 40663 Nozzle 1” 30 GPM 10 oz 40675-60 Nozzle 1½” 60 GPM 14 oz 104.38 40375-100 Nozzle 1½” 100 GPM 14 oz 104.38 STRAIGht STREAM NOZZLE TIPS The plain tip nozzles are made from 6061-T6 aluminum and are hard anodized. These tips give the furthest possible reach without feathering. The 1” size is 4” long & weighs 6 oz. The 1½” is 4¾” long & weighs 8 oz. BASE TIP 10212 1” 3/ 16 ” 51.45 10213 1” ¼” 51.45 10214 1” 3/ ” 51.45 10215 1 ½” 3/ ” 58.16 10216 1 ½” ½” 58.16 10217 1 ½” 5/ 8” 58.16 8 8 DUAL STACKED forestry TIP This wildland tip comes in a lightweight anodized aluminum. The base has a 1½”NH thread, with two discharge orifices: ½” and 3/8”. A knurl is machined on to the end tip for ease of attachment and removal. Because the tip is machined with a tapering bore, it performs with virtually no friction loss, and it is ideal for initial attack in a wildland fire situation. 10208 Dual Stacked Tips 131.22 foam flotm nozzles These lightweight, high efficiency Foam Nozzles are made from a tough, aircraft aluminum. They are hard anodized for durability and corrosion resistance. The unique stream design gives an expansion of 10 to 1 when using Class “A” Foam at .05%. The normal reach is 45 feet or greater, depending on nozzle pressure mix ratio and wind conditions. The 11895 and 11897 are ideal for use on twin tip nozzles. The 11896 WATER FOAM BASE and 11898 are designed for use on a ¾” or 1” booster hose. The 11926 PART GPM GPM* THREAD LGT WGT PRICE and the 11927 make excellent foam when used on 1½” hose lines. 10 100 ¾” 8” 10 oz. 51.66 11895 11896 11897 11898 11926 11927 Quantity discount, 100+ 10 100 Quantity discount, 100+ 18 180 Quantity discount, 100+ 18 180 Quantity discount, 100+ 25 250 Quantity discount, 100+ 35 350 Quantity discount, 100+ 1” 8” 10 oz. ¾” 8” 10 oz. 1” 8” 10 oz. 1½” 16” 1 3/8 lb 1½” 19” 1 5/8 lb * At 10-1 Expansion NOTE: Please specify NH or NPSH. 48.88 51.66 48.88 51.66 48.88 51.66 48.88 55.35 52.37 55.35 52.37 NOZZLES CASCADE FIRE EQUIPMENT COMPANY n 15 GSA SCHEDULE GS-07F-0275Y FIRELINE SPRINKLER Use the Cascade Fire Line Sprinkler to set up a fast and efficient water line, keeping the fire where you want it. The Fire Line Sprinkler uses a Rainbird 35A heavy duty industrial impact sprinkler head. The standard flow is 7.2 GPM at 50 PSI (5 GPM is also available). The pattern can be adjusted from 20° to 360° with a radius of 50’. The 18” heavy duty ground spike with foot bar secures the unit firmly in the ground. The sprinkler head is 42” above ground when the spike is completely imbedded. A ball shut-off is incorporated. The valve, sprinkler head and ¾” GHT female inlet fitting are brass, all other components are galvanized steel. Overall length is 61”. Weight is 8 lbs. We recommend using the Fireline Sprinkler with Outback 600™ Forestry Hose (page 16) and either our Hose Line Tee Valve or Plain Tee (pgs. 18-19). 12040 Fireline Sprinkler 20° to 360° Efficient water line keeps the fire where you want it. 42” Rainbird 35A Sprinkler Head Covers a 50-foot radius Ground spike with foot bar secures the unit firmly to the ground 167.95 VALVES check & bleeder hose line tee valve A valuable tool when using portable pumps that are pumping to higher elevations. Valve is attached to the discharge of the pump. When the pump is shut down, a clapper valve closes and holds the water in the elevated hose line. Bleeder Valve is opened when pump restarted. Allows pump to be started without back pressure from the hose line. When the engine reaches full speed, the bypass valve is closed, allowing all water to enter the hose line. Constructed from lightweight aluminum, hard anodized finish. 6¼” long. Designed to be placed in a 1½” hose line at various intervals. The 1” branch can provide water to a hose line, fill back pumps or canteens. The 1½” threads are NH. The 1” are NPSH or NH. Made of lightweight aluminum with a hard anodized finish. 5” long; weight: 1 lb. 1½” male and female hose thread with a 1” valved tee. 11153 Check & Bleeder Valve 122.49 pressure relief Relief Valves are used to automatically bypass discharge from pump when nozzle is shut off or pressure becomes excessive. When pressure is relieved or nozzle opened, the valve automatically closes, returning discharge to hose line. Hand wheel allows bypass pressure to be set at desired pressure. Available in 1½” all fire hose threads. Please specify threads when ordering. 7½” x 3”; weight: 2 lbs. 11155 Pressure Relief Valve 1½” 90.96 11151 Quantity Discount, 100+ 55.11 11121 1” Cap and Chain 16 n CASCADE FIRE EQUIPMENT COMPANY , 26.84 cascade s gate valve Cascade introduces a new lightweight Gate Valve made from high strength, heat-treated, hard-anodized aluminum. An excellent shutoff to control water hammer with less than 11 turns required to open or close. The inlet sweivel is machined from 6061-T6 seamless aluminum extrusion hardcoat anodized to MIL-A-8625 Type III, Class 1. Featuring a non-rising brass stem with aluminum gland, gate, nipple and seat and a heavyduty wedge with crank handle. ƒƒ 2½” female swivel inlet x 2½” male outlet ƒƒ Dimensions: 11½” x 4” x 5½” ƒƒ Weight: 4 lbs. 40022 FIRELINE SPRINKLER - VALVES 58.49 11151 Hose Line Tee Valve Gate Valve 2½” 215.37 GSA SCHEDULE GS-07F-0275Y ADAPTERS REDUCERS DOUBLE FEMALE Rocker lug Reducers are used to connect a larger hose thread to a smaller one. The female is always larger than the male thread. Manufactured from 6061-T6 aluminum with a hard anodized finish. Double Female rocker lug adapters are used for joining two male threads. Both ends are hose threads only. Made from 3 pieces, both ends swivel. Manufactured from 6061-T6 aluminum with a hard anodized finish. (f) THREAD (f) THREAD 11037 11037 11039 11039 11040 11040 11043 11043 (f) THREAD (M) THREAD 1” ¾” Quantity Discount, 100+ 1½” 1” Quantity Discount, 100+ 2” 1½” Quantity Discount, 100+ 2½” 1½” Quantity Discount, 100+ 20.63 19.3.5 23.21 21.76 27.08 25.39 25.15 23.58 11010 11010 11011 11011 11012 11012 11013 11013 1” 1” Quantity Discount, 100+ 1½” 1½” Quantity Discount, 100+ 2” 2” Quantity Discount, 100+ 2½” 2½” Quantity Discount, 100+ 29.02 27.20 24.50 22.97 39.34 36.88 37.40 35.06 INCREASERS DOUBLE MALE Increaser rocker lugs are used to connect a smaller hose thread to a larger one. The male is always larger than the female thread. Manufactured from 6061-T6 aluminum with a hard anodized finish. Double Male rocker lug adapters are used for joining two female threads. Both ends are hose coupling threads only. Rocker lugs are standard. Manufactured from 6061-T6 aluminum with a hard anodized finish. (M) THREAD (M) THREAD 11064 11064 11065 11065 (f) THREAD (M) THREAD ¾” 1” Quantity Discount, 100+ 1” 1½” Quantity Discount, 100+ 27.20 25.15 25.15 23.58 ADAPTERS Adapters are used to connect hose threads together that are the same diameter but the threads are different. Manufactured from 6061-T6 aluminum with a hard anodized finish. Specify the thread type for the female and male threads. 11079 11079 11080 11080 (f) THREAD (M) THREAD 1” 1” Quantity Discount, 100+ 1½” 1½” Quantity Discount, 100+ 21.92 20.55 19.99 18.74 11000 11000 11001 11001 11002 11002 11003 11003 1” 1” Quantity Discount, 100+ 1½” 1½” Quantity Discount, 100+ 2” 2” Quantity Discount, 100+ 2½” 2½” Quantity Discount, 100+ 36.11 33.85 24.50 22.97 41.91 39.29 22.57 21.16 OUTLET CAPS Hose Caps are used to protect male hose threads from damage. They are equipped with rocker lugs. Manufactured from 6016T6 lightweight aluminum with hard anodized finish. (F) THREAD 11121 11122 11124 1” 1½” 2½” 26.84 28.33 28.33 hose line tee The Hose Line Tee allows 1” hose lines to be taken from 1½” lines at various intervals. The 1” outlet is also threaded internally with a ½” female NPT which allows a hose bib to be attached. Made from lightweight aluminum with a hard anodized finish. 1½” male and 1½” female thread with a 1” NH or NPSH tee. 11152 Tee 1½” x 1½” x 1” 41.01 11121 1” Cap and Chain 26.84 ADAPTERS - GIZMO CASCADE FIRE EQUIPMENT COMPANY n 17 GSA SCHEDULE GS-07F-0275Y SPANNERS - WRENCHES , cascade s hydrant wrench UNIVERSAL SPANNER Our Hydrant Wrench is not like any other wrench on the market. A tough manganese bronze head with a plated steel handle makes it firefighter-indestructable. Supplied with a high-visibility grip. Works with both a pin and a rocker lug. Lifetime warranty on workmanship and material. 10313 Hydrant Wrench - 5 lb 10320 Universal Spanner - 8 oz. 20.13 A lightweight Hose Clamp that can be used to easily shut off 1” or 1½” single jacketed fire hose at pressures up to 200 PSI. A spanner is an integral part of the clamp. Made from a tough, aluminum alloy. 11213 10” Forestry Hose Clamp - 10 oz 55.15 52.19 SPANNER WRENCH HOLDER SPANNER/HYDRANT WRENCH HOLDER Mounts on apparatus for easy accessibility. Quick, snap action release. Holds two 10320 Universal Spanners and one 10313 Hydrant Wrench. Available with or without wrenches. Holder with Spanners & 10322W/S Hydrant Wrench - 8.25 lb Holder without Spanners 10322WO/S & Hydrant Wrench - 1.5 lb FORESTRY HOSE CLAMP This Spanner is for any style or size coupling from 1¼” to 4”. Made of tough lightweight aluminum. Has window jimmy, gas cock slot, hammer head and hanger loop. Length: 12¼”. 156.57 HOSE CLAMP holder Mounts on apparatus for easy accessibility. Quick, snap action release. Holds two 10320 Universal Spanners. Available with or without wrenches. 10323W/S Holder with Spanners - 2 lb Holder without Spanners 10323WO/S 1.25 lb 99.16 58.90 11212 67.10 FORESTRY SPANNERS The Forestry Spanner is used on rocker lug fittings. Made of cast aluminum, it fits both 1” and 1½” couplings. The Combination Forestry Spanner fits 1” - 2½” rocker lug couplings. Made from aluminum. 11201 Spanner, Aluminum - 2.5 oz. 5.67 11201 Quantity Discount, 100+ 5.32 11202 Combo Spanner - 8 oz. 9.99 11202 Quantity Discount, 100+ 9.21 To keep your Forestry Hose Clamp (part#11213) close at hand, Cascade introduces the Hose Clamp Holder. Made from durable polyurethane webbing, the holder attaches to your equipment belt or web gear with heavy duty snaps. A velcro strap holds the clamp tight. HYDRANT/SPANNER WRENCH Made of lightweight aluminum and can be used on both rocker and pin lugs. Measures under 9” and the weight is 8 oz. Pentagon will receive 1¼” hydrants and can be used on up to 5” rocker lug fittings. This spanner will fit into most turnout jacket pockets. 10312 Hydrant/Spanner Wrench: 1 ¼” Pentagon SPANNERS - WRENCHES 18 n CASCADE FIRE EQUIPMENT COMPANY 17.89 9.55 Hose Clamp Holder running board holders These mounting plates are fastened to the running board or in cabinets by bolts. They will securely hold nozzles, tips and fittings. Nickel chrome-plated finish. PART (M)THREADS WT (lbs) PRICE 11176 ¾” 1/8 11.93 11177 1” 1/4 12.68 11178 1 ½” 3/8 15.66 GSA SCHEDULE GS-07F-0275Y HOSE GEAR hydrant tool bag Made of tough Cordura with a large polypropylene handle for ease of carrying, Cascade’s Hydrant Tool Bag holds all the necessary equipment for hooking up hose to hydrants. Brass grommet on bottom for drainage.16” high x 10.5” diameter. Tools not included. 50175 Hydrant Tool Bag 37.28 LDH turntable 14046 LDH Turntable 145.39 Cascade’s LDH Turntable is for loading large diameter hose onto fire trucks. Made of lightweight diamondplate, the turntable features a Lazy Susan swivel and slotted handle for carrying. The low profile design makes it easy to store. DIMENSIONS: 24” x 26” 45o Stainless Steel Elbow hydrant HOSE tool bag Easily access your equipment for hooking up hose to hydrant with Cascade’s Hydrant Hose Tool Bag. Tool bag fits over 4”, 5”, and 6” hose and is held in place with four 2” wide elastic straps. Made from tough Cordura® with a self-fastening flap to cover and protect the heavy-duty zipper. Padded for extra protection and sewn to Cascade’s highest quality standards, Cascade’s Hydrant Hose Tool Bag will withstand the toughest conditions while providing easy access to tools when you need them. 50176 Hydrant Hose Tool Bag 58.94 gravity sock The Gravity Sock is used to capture water from a stream or spring above the fire. The Sock is secured by stakes, rocks or rope at the water source and a hose line is attached. The gathering point should be at least 100 feet above the fire. The Gravity Sock is 9” in diameter and 42” long with a 1½” male coupling. Constructed of heavy duty treated canvas duck. 11156 Gravity Sock 1½” NH 54.92 Stainless Steel 45 degree elbow designed to take the strain from suction or discharge hose when connected to the pumper. Size is 1½”. The female is a swivel hose NH thread and the male is rigid hose NH thread. 10251 Elbow 1½” NH 89.47 iZone hose hooks Cascade’s iZone hose hooks allow you to quickly store hose before moving to a new location. Made from aluminum and stainless steel. A pin allows hook to be locked in position when being used and in either direction when not being used. Includes a backing plate and four bolts. Weight limit is 400 pounds. 14300 iZone Hose Hooks 175.31/pair Quickly store hose before moving to a new location HOSE GEAR - GRAVITY SOCK CASCADE FIRE EQUIPMENT COMPANY n 19 GSA SCHEDULE GS-07F-0275Y slide calculator WYES Recommended for wildland firefighting. Our nozzle discharge/friction loss Slide Calculator is a useful tool in determining flows through nozzle sizes as small as 3/16” at practical fire nozzle pressures. It can also be used to calculate friction loss in hose lines of various sizes through a flow range as small as 5 GPM. The two-sided design displays both English and Metric measurements. 91001 Cascade Slide Calculator 9.32 lightweight gated wye Durable, lightweight wyes are constructed from anodized aluminum. The body is epoxy-coated red for an extremely tough finish. The quarter-turn ball valves have seats that can be adjusted without disassembling the valve. ƒƒ 40085 has one 1½” female inlet & two 1½” male outlets ƒƒ 40067 has one 2½” female inlet & two 1½” male outlets 40085 Lightweight Gated Wye 1½” 217.71 40067 Lightweight Gated Wye 2½” 227.41 plain wye gizmo shutoff This light-weight Plain Wye is used to divide one hose line into two. Constructed from tough aircraft aluminum with a protective anodized coating. The Gizmo is a compact, lightweight shut-off device that can be used to restrict water flows when hose lines are laid downhill. The Gizmo can be used as a shut off in hose lines, behind foam or other nozzles not equipped with conventional shutoffs. The Gizmo is not a positive shut-off, but in situations where a small amount of leakage is acceptable this shut-off is a valuable tool. Manufactured from 6061-T6 aluminum, that has been hard anodized for corrosion resistance. Weight is only 6.8 oz. and the size is compact: 2” in length and 2½” in diameter. The Gizmo has 1½” NH male and female threads. 47020 Gizmo Shut-off 1 ½” NH 61.25 47020 Quantity Discount, 100+ 57.70 ƒƒ Compact size: 5” x 4¾” ƒƒ Lightweight: 14 oz. ƒƒ One 1½” female swivel and two 1½” male threads. inlet outlet (f) (m) 40040 1½” 1½” 63.38 forestry wye These lightweight Wye Valves are used to divide one hose line into two with independent control for each line. Constructed from high quality aluminum with anodized hose threads, stainless steel drive spindle, and stainless steel components. ƒƒ Operate at pressures up to 600 PSI ƒƒ Meets USFS specification 5100-380 40065 inlet (f) outlet (m) 1½” 1½” 175.21 no snag wye Lightweight Wye Valves used to divide one hose line into two with independent control for each line. Constructed from high quality aluminum with anodized hose threads, stainless steel drive spindle, stainless steel components, and snag free handles. Available in four configurations. ƒƒ Operate at pressures up to 600 PSI ƒƒ Meets USFS specification 5100-380 40064 Wye 1”(F) x Two 1”(M) 178.94 40068 Wye 1½”(F) x Two 1”(M) 178.94 40069 Wye 1½”(F) x Two 1½”(M) 178.94 40084 Wye 1½”(F) x 1½”(M) x 1”(M) 178.94 When ordering Forestry Wyes, please specify NH or NPSH thread. WYES - GAUGES 20 n CASCADE FIRE EQUIPMENT COMPANY GSA SCHEDULE GS-07F-0275Y WATER FLOW GAUGES Line GAUGES hydrant flow tube & PITOT GAUGE Tests water flow from a hydrant ƒƒ Holds pitot gauge in center of 2.5” bore ƒƒ Gives exact pressure readings ƒƒ Made from anodized aluminum 11491 Hydrant Flow Tube w/Pitot 446.61 Used for testing static or flowing pressures in hose or nozzles ƒƒ Rocker lug available with any thread ƒƒ Comes with 0-300 lb. glycerine-filled 2½” diameter gauge ƒƒ Made from tough, lightweight 6061-T6 aluminum alloy ƒƒ Freeze proof to -400 F 11479 Line Gauge 1½” x 1 ½” ƒƒ High impact resistant case and lens 11480 Line Gauge 2½” x 2 ½” NH 151.36 153.59 hose test cap Used for testing hose or static pressures on hydrants & trucks ƒƒ Rocker lug swivel base is standard ƒƒ Pressure release petcock ƒƒ Made from tough, lightweight 6061-T6 aluminum alloy ƒƒ Comes with 0-300 lb. glycerine filled 2½” diameter gauge ƒƒ Freeze proof to -400 F 11477 ƒƒ High impact resistant cases and lens PITOT GAUGE Comes with Akron Fire Stream calculator in a heavy-duty carrying case. Hand Held Pitot Gauge 140.17 11478 Test Cap 2½” 163.28 pump test kit - line gauge & cap ƒƒ Heavy duty nickel plated blade & pitot tube ƒƒ Conveniently located bleeder valve ƒƒ 3½” liquid filled 0-160 psi (0-1100 kpa) Inspector’s Test gauge ƒƒ 2 p.s.i (20 kpa) increments, 1% accurate full scale ƒƒ Includes Certificate of Accuracy 11490 Test Cap 1½” Used for testing pump pressure from discharge ƒƒ Available size of gauge bodies; 1½” NH and 2½” NH ƒƒ Comes with 0-300 lb. glycerine-filled 2½” diameter gauge with high impact resistant case and lens ƒƒ Square edge orifice is machined for complete accuracy ƒƒ Made from tough, lightweight 6061-T6 aluminum alloy 11495 1 ½” Pump Test Kit 170.74 11496 2 ½” Pump Test Kit 185.65 290.78 liquid filled gauges Pressure ranges available: 0-300, 0-400 and 0-600 PSI pressure; 30”-0-300, 30”-0-400 and 30”-0-600 PSI Compound. panel gauges 11451 2½” Pressure 0-400 PSI 53.33 11452 2½” Pressure 0-600 PSI 53.33 11453 2½” Comp. 30” 0-400 PSI 53.33 11454 2½” Comp. 30” 0-600 PSI 53.33 11455 2½” Vacuum 0-30” HG 53.33 11456 3½” Pressure 0-400 PSI 91.54 11457 3½” Pressure 0-600 PSI 91.54 11458 3½” Comp. 30” 0-400 PSI 91.54 11459 3½” Comp. 30” 0-600 PSI 91.54 11460 3½” Vacuum 0-30” HG 91.54 ƒƒ ACCURACY - 1 % Full Scale - ANSI Grade 1A ƒƒ Acrylic lens and Zytel nylon case ƒƒ ½” blow out plug ƒƒ Bright stainless steel bezel material (Black bezel optional) ƒƒ Kem-X freeze proof protection ƒƒ ¼ ” Male NPT brass center back connection ƒƒ Phosphor bronze, filled with freeze proof liquid - isolated by diaphragm ƒƒ FILL FLUID - Low temp glycerin (for -40°F - 150°F service) ƒƒ 2½” or 3½” aluminum dial ƒƒ Two sided baked enamel finish stem mounted gauges 11461 2½” Pressure 0-200 PSI 53.33 11462 2½” Pressure 0-400 PSI 53.33 11463 2½” Pressure 0-600 PSI 53.33 11464 2½” Comp. 30” 0-400 PSI 53.33 11465 2½” Comp. 30” 0-600 PSI 53.33 11466 2½” Vacuum 0-30” HG 53.33 11467 3½” Pressure 0-200 PSI 91.54 11468 3½” Pressure 0-400 PSI 91.54 11469 3½” Pressure 0-600 PSI 91.54 11470 3½” Comp. 30” 0-400 PSI 91.54 11471 3½” Comp. 30” 0-600 PSI 91.54 11472 3½” Vacuum 0-30” HG 91.54 WATER FLOW GAUGES CASCADE FIRE EQUIPMENT COMPANY n 21 GSA SCHEDULE GS-07F-0275Y hose roller Easily roll hose into neat and compact rolls Cascade’s Hose Roller was designed after the popular Western Fire Hose Roller. It is a sturdy, yet lightweight Hose Roller that has been designed to roll single or double rolls of 1” to 3” hose. It can also be used to roll 100’ lengths of 1” or 1½” hose into a side-by-side double donut. Whichever length or size of hose, you can be sure that the rolls will be neat and compact. Ideally suited for rolling hose at the station or warehouse after hose has been washed. A Quick Mount Bracket comes standard with the Hose Roller for mounting the roller on a wall or work bench. It can also be stowed in a compartment and quickly mounted on the vehicle when needed. There is also an optional trailer hitch bracket for ease of mobility. The Hose Roller has a bronze Oilite self-lubricating bearing and is constructed from lightweight aluminum that has been nickel plated for extra protection. Length: 32”, Width: 11½”, Weight: 21 lb. HOSE ROLLER MOUNTING OPTIONS ƒƒ Rolls 1” to 3” hose ƒƒ Rugged construction ƒƒ Easily removed from bracket ƒƒ Swings to three positions on bracket ƒƒ Rolls double or single rolls ƒƒ One person operation ƒƒ Can be mounted on vehicle or in Fire Station 14042 Hose Roller with Quick Mount Bracket 652.39 14044 Vehicle Bracket 134.21 ƒƒ Quick Mount Bracket for mounting the roller on a wall or work bench comes standard with Hose Roller. Quick Mount Bracket ƒƒ Hose roller can be mounted on Cascade’s Hose Storage Rack with hose roller bracket (Part #10246). 10246 ƒƒ Trailer hitch bracket for mounting on vehicle (part #14044). Neatly and efficiently organize your hose 14044 hose rack Our large-capacity Hose Storage and Handling System eliminates most of the drudgery of handling hose in the fire house. The rack holds up to 48 rolls of 2½” hose or 20 rolls of 5” hose, plus 24 rolls of 1½” hose. Constructed from heavy strength aluminum square tube, the entire storage system is protected by a thick powder coat finish. The heavyduty industrial casters allow for easy movement of the rack, even when fully loaded. All four casters are equipped with locking brakes. Size: 78” long x 91” high and 36” wide. Weight: 170 lbs. An optional Hose Roller is also available. The Hose Roller can be used to roll up hose in a neat coil before storing on the storage rack. ƒƒ Three-tiered rack provides maximum capacity ƒƒ Spacious lower tier accommodates large-diameter hose ƒƒ Large casters for ease of movement, plus brakes on all casters for secure positioning ƒƒ Thick powder-coated finish increasing strength and leaving no rough edges ƒƒ Hose Roller option for one-man operation HOSE ROLLER - HOSE RACK 22 n CASCADE FIRE EQUIPMENT COMPANY 10245 Cascade’s Hose Storage Rack 10246 Hose Roller Bracket Only (with bolts) 14042 Hose Roller 1,910.33 95.52 652.39 GSA SCHEDULE GS-07F-0275Y hose tester Hose testing is recommended after extensive use, for acceptance tests, annual maintenance, or after repairs. The Cascade Fire Hose Test Pump is designed to quickly and safely test large quantities of hose to standards set forth by the National Fire Protection Association (NFPA) and the Rubber Manufacturer’s Association (RMA). Cascade Test Pumps are built for professional service use by engineers, inspectors, testing laboratories, forestry agencies and fire departments where accuracy is imperative. SPECIFICATIONS 1½ ” nh female swivel inlet connector pressure relief valve Quickly and safely test large quantities of hose. pressure gauge DIMENSIONS 24.5” x 39” x 24” WEIGHT 135 lbs. Heavy Duty 110 V Repulsion-Induction Type, Fully MOTOR Enclosed and Fan Cooled PUMP High Pressure Twin Piston, Delivers 3 GPM at 500 PSI VALVES Aluminum Cascade valves MANIFOLD Stainless Steel, 1000 PSI Test GAUGE 0-600 PSI Liquid Filled FRAME Mild Steel with Baked Powder Coat Finish ƒƒ Four independently valved 1½” NST discharges ƒƒ Inline 1½” valve for static testing of hose and tester ƒƒ Test up to 4 lines simultaneously ƒƒ Use reducers or increasers to test hoses from 1” to 6” ƒƒ Regulating Valve allows pressure adjustments up to 500 PSI ƒƒ Silicon-filled Gauge permits easy reading of pressure setting ƒƒ Stainless steel manifold and fasteners with aluminum valves ƒƒ Baked power coat finish ƒƒ GFCI ƒƒ Equipment box 11500 Cascade’s Hose Tester tool box Convenient dolly style with wheels. 1½ ” nh male outlet hose test discharge valves 3,024.69 hose cutter Cascade Fire Equipment Company introduces its new, one of a kind hose cutter. Made of aluminum, machined to precision, and powder coated for a tough, hard finish, Cascade’s hose cutter is built to fire industry standards. The hose cutter easily and safely makes clean, straight cuts which are necessary for the secure and effective coupling of hose. Vise adjusts to cut hose of up to 6” in diameter. A ratchet handle raises and lowers the steel blade. Heavy duty construction, yet light enough to carry, with hand holds for easy transporting. If your department routinely couples hose, the hose cutter is essential equipment for the station. The first fire hose cutter on the market, Cascade’s hose cutter compliments its other hose handling products; hose tester, hose roller, and hose storage rack. ƒƒ Heavy duty aluminum construction All Cascade Fire Equipment products ƒƒ Powder coated for a tough, hard finish are manufactured exclusively in the ƒƒ Easy and safe to use United States to the highest quality ƒƒ Makes clean, straight cuts standards. ƒƒ Cuts hose up to 6” 11300 Cascade’s Hose Cutter 791.99 ƒƒ Ratchet handle raises and lowers steel blade ƒƒ Handgrips for easy transporting Essential equipment for coupling hose. HOSE TESTER - HOSE CUTTER CASCADE FIRE EQUIPMENT COMPANY n 23 GSA SCHEDULE GS-07F-0275Y HIGH PERFORMANCE EJECTOR Cascade’s Ejector is a valuable tool for obtaining additional water supplies from sources that would normally be difficult or impossible to reach. The Ejector will pick up more than twice as much water as is used to activate them. This allows water to be obtained from as much as 70 feet below the pumper or from sources several hundred feet from the pump. Attaching the suction port on the High Performance Ejector to a Foot valve & Strainer (sold separately) is recommended to prevent the loss of prime and keep foreign objects from entering the water supply. Cascade manufactures two sizes of Ejectors, 1½” and 2½”. 14726 1½” Ejector 147.95 14726 Quantity Discount 10+ 139.40 23952 1½” NH Foot Valve & Strainer 87.56 14727 2½” High Volume Ejector 338.29 23954 2½” NHPS Foot Valve & Strainer 234.81 14727: 2½” size: 18 1/4”L x 4½”W x 5½”H, weight: 4¾ lbs. INLET: 1½”, DISCHARGE: 2½”, SUCTION: 2½” 14726: 1½” size: 9½”L x 2½”W x 3½”H, weight: 1¼ lbs. INLET: 1”, DISCHARGE: 1½”, SUCTION: 1½” PERFORMANCE DATA for 14727 INLET INLET PICKUP PRESSURE GPM GPM 100 PSI 76 133 140 PSI 88 133 180 PSI 100 133 200 PSI 107 133 DISCHARGE DISCHARGE GPM IN FEET 209 25 221 35 233 60 240 70 PERFORMANCE DATA for 14726 100 PSI 140 PSI 180 PSI 200 PSI 24 28 32 34 43 43 43 43 67 71 75 77 25 35 60 70 foot valves & strainers Cascade Fire Equipment introduces its new foot valves and strainers. This lightweight valve is manufactured from hard anodized aluminum and has a reinforced stainless steel screen. A full flow clapper valve assures maximum flows with no restriction. Adhered to the end of suction hose for drafting, the valve assures that the pump does not lose its prime and holds its prime once the pump is turned off. 2” and 3” Foot Valves also available. Please call for pricing. EJECTOR - FOOTVALVES 24 n CASCADE FIRE EQUIPMENT COMPANY foot valve sizes & weights dimensions weight 1½” NH 7½” x 3½” 1.6 lbs. 2½” NH 10” x 2½” 3.05 lbs 23952 Foot Valve & Strainer 1½” NH 87.56 23954 Foot Valve & Strainer 2½” NH 234.81 GSA SCHEDULE GS-07F-0275Y FORESTRY HAND TOOLS Super Pulaski Maximum use on grubbing & trenching. The Pulaski tool combines an axe bit with an adze-shaped grub hoe on a 36” wood handle. A versatile tool for constructing firebreaks, as it can be used to both dig soil and chop wood and is effective for digging in root-bound or hard soil. Cascade’s Super Pulaski doubles the hoe blade size of the original Pulaski. ƒƒ Head made from an alloy tool steel ƒƒ Handle is a No. 1 hickory ƒƒ Length: 36” ƒƒ Weight: 6.5 lbs. 40282 Super Pulaski Tool 118.60 hoe-shovel Hoe-Shovel - Good for grubbing, digging & general brush clearance. rhino tool super pulaski Cascade’s Hoe-shovel is two tools in one, giving the user more versatility and less weight to carry. A wide shovel can be converted to a hoe with an adjustable pin. The blade is a forged solid shank and is sharpened on both ends. ƒƒ Adjustable pin allows the shovel to become a hoe ƒƒ Blade sharpended on both sides ƒƒ Blade is forged solid shank ƒƒ 38” handle ƒƒ Overall length: 51” ƒƒ Weight: 4 lbs. 40280 Hoe-Shovel 95.52 fire broom Cascade’s Rhino tool is a must on the fire line. A curved blade sharpened on both sides makes for easier digging and brush removal. ƒƒ Blade sharpened on both sides ƒƒ Blade is a forged solid shank ƒƒ 38” handle ƒƒ Overall length: 50½” ƒƒ Weight: 3¼ lbs. 40283 Rhino Tool Rhino Tool - Ideal for cutting handlines & side hill cutting. 62.88 the shasta & shastina tools The Cal Fire crew in Shasta County, California helped Cascade Fire Equipment design the Shasta Tool. The combination of a 4 tined rake and a sharp, curved shovel blade make it a highly effective tool for digging, clearing brush, and building fire lines. Heat treated for toughness and wear resistance which means extended use and less maintenance in the field. The Shastina is a smaller, more compact version of the Shasta Tool with a shorter handle and a smaller blade, making it lighter, easier to carry, and easier to use. ƒƒ Heavy duty 1/8” high carbon steel blade ƒƒ Blade size: Shasta: 9.5” x 9”; Shastina: 8” x 9”, Tines: 3.5” ƒƒ Black enamel finish ƒƒ Removable, replaceable head ƒƒ Strong, durable ash handle; Shasta: 48”; Shastina: 40.75” 40286 Shasta Tool 87.56 40288 Shastina Tool 87.56 40286 40288 Highly effective for digging, clearing, and building fire lines. For grain and grass fires and direct attack on range fires, the Fire Broom is also effective as a mop-up tool. Heavy, flat steel bristle in a wooden block. Steel shank firmy secures handle to block. ƒƒ Heavy, flat steel bristle in a wooden block ƒƒ Steel shank firmly secures handle to the block. ƒƒ Effective as a mop-up tool ƒƒ Replaceable broom head Fire Broom - For grain & grass fires ƒƒ 54” hard wood handle 40300 Complete Fire Broom 48.55 & direct attack on range fires. FORESTRY HAND TOOLS CASCADE FIRE EQUIPMENT COMPANY n 25 GSA SCHEDULE GS-07F-0275Y backfire/forestry drip torch UN/D.O.T. approved. Meets USDA spec 5100-614A June 11, 2009 u n 3B1/Y/150/04 USA/+BV0639 .280-.080-.121 Our versatile Drip Torch is used for firing semi-dry fuels. It is an ideal tool for prescribed burning, back firing, roadside burning, slash and brush disposal. The Torch incorporates a ball check valve and fuel trap to prevent flashbacks. Constructed from 15 gauge seamless aluminum with a rugged forged aluminum bottom to prevent wear and punctures. The spout is reversible for storage. A breathing tube with a shut-off prevents fuel leaks when in the storage mode. Parts are interchangeable with most other drip torches. Drip Torch stored in Truck Mount Bracket SPECIFICATIONS Closed: 14”, Assembled: 25” DIAMETER 6” HEIGHT EMPTY WT. 5 lbs. FULL WT. 16 lbs. CAPACITY 1 1/4 US Gallons Drip Torch: 6 lbs. SHIP WT. Bracket: 2½ lbs 12000 Drip Torch 143.92 12000 Quantity Discount, 25+ 140.05 12001 Truck Mount Bracket 47.76 DRIP TORCH 26 n CASCADE FIRE EQUIPMENT COMPANY GSA SCHEDULE GS-07F-0275Y drip torch parts 19.95 12002 Tank Cover 12003 Check Valve Ball 1.50 12004 Check Valve Seat 3.17 12005 Outlet Screen 1.50 12006 Discharge Sealing Plug 5.44 12007 Discharge Plug Gasket 1.72 12008 Discharge Plug Chain 1.72 12009 Spout and Fuel Trap 20.86 12016 Tank Collar Gasket 2.72 17.46 12017 Tank Cover Lockring 12018 Chain Screw 12022 Breather Tube Assembly 13.96 12023 Igniter 11.34 .50 6.03 12024 Nozzle 12025-N Drip Torch Part Kit 99.97 fire finder Detect heat sources as small as a lit cigarette on an asphalt roadway in broad sunlight with the Dyn-Optics 955 Fire Finder Professional™ Thermal Scanner, a light weight, handheld, highly selective thermal scanner designed specifically for finding hot spots. Dyn-Optics time-proven thermal scanners have been helping fire fighters complete their jobs quicker, safer and prevent rekindles for over twenty years. FEATURES ƒƒ Unique patented design ƒƒ SmartSightTM Technology maintains maximum sensitivity even in full sunlight ƒƒ Faster, more reliable hot spot detection ƒƒ Unaffected by sunlight - unsurpassed performance in outdoor applications ƒƒ Complete mop-ups in 1/5th time ƒƒ Includes built-in self test ensuring 100% device integrity ƒƒ Prevents call backs ƒƒ Operates through glass ƒƒ Uses standard AA batteries ƒƒ Lightweight, easy to use ƒƒ Help Needed alarm ƒƒ Water-resistant, rugged anodized machined aluminum housing ƒƒ Maintenance-free ƒƒ No-nonsense Warranty Includes: ƒƒ Model 955 Fire Finder Professional Thermal Scanner ƒƒ Waterproof Case with Lifetime Warranty ƒƒ Codura Carrying Pouch ƒƒ Reflective Wrist Lanyard ƒƒ Operations manual ƒƒ 3 Year Warranty NO NONSENSE WARRANTY 49990 Fire Finder Thermal Scanner 785.84 Each Fire Finder Professional™ is backed with an unconditional 3 year warranty. If your Fire Finder Professional™ fails for any reason (batteries excluded), please return it to DynOptics and we will repair or replace it free of charge. Please contact Dyn-Optics to make arrangements for a return prior to shipping item back to factory. DRIP TORCH PARTS - FIRE FINDER CASCADE FIRE EQUIPMENT COMPANY n 27 GSA SCHEDULE GS-07F-0275Y scba gear 12 Cylinder Storage Rack These Cylinder Storage Racks assure you stability and safe storage for SCBA Cylinders. Vastly increases storage capacity and creates additional floor space. Units are stackable two racks high, with four pre-drilled steel mounting plates (.125”). ƒƒ Holds up to 12 cylinders per rack ƒƒ Dimensions: 29”H x 31.75”W x 27.5”D ƒƒ Baskets constructed of ¼” steel wire ƒƒ All joings welded and deburred ƒƒ Vinyl-coated (black) ƒƒ Quick-locking front panel ƒƒ Holds 30-, 45-, or 60-minute cylinders 50401 12-Cylinder SCBA Cylinder Rack 423.17 87.56 50401W Locking Wheel Kit 12 Cylinder Rack with locking wheels scba mask bag low profile scba mask bag An excellent investment to protect your valuable SCBA facepieces from abrasion and dirt. Cascade makes two sizes. ƒƒ Dimensions: 13”x17” ƒƒ Soft inner liner ƒƒ Made from water-resistant DuPont Cordura® ƒƒ 50011 will hold all standard SCBA Face Masks ƒƒ Can be hung by two grommets in the upper corners ƒƒ Bottom of bag is secured by full width self-fastening strips ƒƒ Quick opening by pulling on tabs 50011 SCBA Mask Bag 19.39 SCBA ACCESSORIES 28 n CASCADE FIRE EQUIPMENT COMPANY ƒƒ Dimensions: 11.75”x13.5” ƒƒ Made of lightweight nylon pack cloth ƒƒ Soft fleece inner liner ƒƒ Secured by full width hook and loop ƒƒ Opened quickly by pulling on webbing tabs ƒƒ 1” webbing loop to hang on compartment walls or hooks ƒƒ ID window to identify the owner ƒƒ Small opening allows the bag to be aired out 50000 Low Profile SCBA Mask Bag 17.89 GSA SCHEDULE GS-07F-0275Y rit BAG Specifically designed for Rapid Intervention Teams or Emergency Response Teams. The primary purpose of the RIT bag is to supply air to a downed victim or firefighter. ƒƒ Fits 30-, 45- or 60-minute cylinders ƒƒ Large zippered side pocket for extra essential gear ƒƒ Includes a versatile, multi-position shoulder strap ƒƒ High-visibility orange Cordura ƒƒ Glo-Flex trim, (reflects light and glows in the dark) 50300 75.62 Cascade RIT Bag carry alls DEBRIS CARRIER O.R.C.A. Bag Designed to remove debris during overhaul after a fire. When overhauling, the cover is laid flat on the floor and debris is placed in the carrier. It can then be picked up by two or four persons and carried to disposal area. Constructed from heavy-duty, doublethickness canvas with carrying handles at each corner. Size is 68” x 64”. 24316 Debris Carrier 169.27 Occupational Rescue Carry All 4 6 X 68 Excellent for hard to reach places, Cascade’s O.R.C.A. Bag makes any job easier, no matter what the size or shape of the contents you’re carrying. This Carry-All can be used when other conventional debris carriers will not fit into tight areas. Made from tough canvas material, backed with heavy-duty polypropylene webbing with 10 dual handles. Size is 47” x 72”. 24317 O.R.C.A. Bag 159.19 47 2 7 X CARRY ALLS CASCADE FIRE EQUIPMENT COMPANY • 29 GSA SCHEDULE GS-07F-0275Y structural turnouts INNOVATION ƒƒ BR-1 Collar™ Collar system offering unmatched protection - 6 layers of outer shell, moisture barrier and thermal barrier. ƒƒ One piece “L” shaped storm flap Allows a full coverage of the throat area without any gap while providing 4 layers of continuous moisture and thermal barrier protection. ƒƒ Preformed sleeves Contoured arm cut for ease of movement and comfort. ƒƒ Retractable Action Back™ Extensible gusset allowing a greater freedom of movement and better reach. ƒƒ Enhanced Mobility Knee™ Provides more flexibility and greater movement capabilities in the knee area. There isn’t anything better than gear that fits properly. No restriction, just plain performance and safety. INNOTEX® turnout gear provides extremely durable, innovative protective features to firefighters and allows great freedom of movement in the most stressful environments. Through the years, INNOTEX has developed tremendous expertise in the development, manufacturing and distribution of fire retardant protective clothing. The knowledge acquired through a long history of garment manufacturing in partnership with World leading companies has provided grounds for NFPA 1971 certified turnout gear that has been praised for its exceptional quality, durability and safety features. Our objective is to keep innovating in order to continue offering the best gear on the market to firefighters. DURABILITY ƒƒ Double needle lock stitch INNOTEX® uses optimal tension adjustments and the most secure type of stitching for increased durability. ƒƒ High density bar tacks High density bar tacks on all stress points, including 8 bar tacks per pocket. ƒƒ X stitched hook and loop Double needle lock stitched on large pieces and X lock stitched on small pieces for increased durability. 8 bar tacks per pocket NFPA CERTIFIED 1971-2013 SAFETY ƒƒ Wristlet Water Evacuation System (WWES) Shallow water well with drain eyelets reducing water entrapment and risk of burn injuries. ƒƒ Double fly protection Three layers on the interior portion and three layers on the exterior portion of the flap for increased protection. ƒƒ Unique Drag Rescue Device system Supple Kevlar webbing to reduce the risk of moisture barrier abrasion. Unique positioning of the loop system to increase comfort and ease DRD reload. durable stitching pre-formed legs wristlet water evacuation system QUALITY ƒƒ Ergonomic design on all three layers Designed to complement one another ergonomically and ensure perfect fit and ease of movement. ƒƒ OPTIMIZED COMPONENT MANAGEMENT Proper fit, uniformity, garment optimization and order accuracy are ensured in a state of the art assisted design environment. ƒƒ Quality Workmanship All INNOTEX® garments are produced by experienced seamstresses for exceptional for results that outperform to the competition. double fly protection arched leg cuff yoc strap STRUCTURAL TURNOUTS 30 n CASCADE FIRE EQUIPMENT COMPANY underarm gusset MOISTURE BARRIERS GSA SCHEDULE GS-07F-0275Y RT7100 TYPE 3D (4.6 osy) Comprised of a GORE® membrane and a 3.0 osy needle-punched nonwoven Nomex substrate. High thermal stability, will not melt or degrade. Crosstech® black Type 2f (4.7 osy) Comprised of a CROSSTECH membrane laminated to a 3.3 oxy Nomex IIIA woven pajama check substrate. High breathablility, excellent thermal stability, and long-lasting protection against liquid penetration. THERMAL LINERS XTRA-lite chambray (7.75 osy)™ 3.25 osy Nomex® IIIA ripstop weave calendered face cloth, quilted to a 4.5 osy aramid needlepunch felt. Quantum 3D SL2i (7.7 osy) 3.8 osy 61% para-aramid/34% FR rayon/5% nylon face cloth quilted to 1 layer of 2.3 osy and 1 layer of 1.5 osy meta-aramid/paraaramid non woven batt. NOMEX® 50157, 50162: Provides price conscious firefighters with an honest level of protection. Innovative features such as the patented BR-1® collar guarantee a high degree of safety wrapped into a very durable composite. composite ƒƒ Outer shell: Nomex IIIA (Yellow) ƒƒ Moisture Barrier: RT7100™ (Tpe 3D) ƒƒ Thermal liner: XLT-Lite™ Chambray 7.8 osy chambray 2-layers (7 osy) 3.2 osy meta-aramid plain weave face cloth, quilted to 1 layer of 2.3 osy and 1 layer of 1.5 osy spunlace. Coat 50157 trim patterns ƒƒ Unique patented BR-1® six-layer Collar® (3”) ƒƒ 32” style coat ƒƒ Hook & loop 2” x 2” throat flap ƒƒ Zip and hook and loop attachment ƒƒ RHL® rounded hook & loop ƒƒ Radio pocket 8” x 4” x 2” with mic loop (left chest) ƒƒ Two semi bellow 8” x 10” pockets ƒƒ Inside left pocket with hook and loop attachment ƒƒ NFPA style 3” triple trim (lime yellow/silver) ƒƒ Nomex® wristlets with thumb hole ƒƒ Ara-Shield® reinforcement on sleeve cuffs (grey) Pants 50162 Available stock gear sizes: chest size waist inseam 34-36 S 28-30 28 & 30 & 32 38-40 M 32-34 28 & 30 & 32 42-44 L 36-38 28 & 30 & 32 46-48 XL 40-42 28 & 30 & 32 50-52 2XL 44-46 28 & 30 & 32 54-56 3XL 48-50 28 & 30 & 32 58-60 4X 52-54 28 & 30 & 32 ƒƒ Regular waist ƒƒ Hook & D-ring + hook & loops fastener closure ƒƒ Two semi bellow 10” x 10” pockets ƒƒ Ara-Shield® reinforcement on cuffs & knees (grey) ƒƒ Waist adjustment straps in black webbing ƒƒ Deluxe heavy duty removable cotton “H” style suspenders ƒƒ Extra padding in the knee 50157 50162 NOMEX® Coat NOMEX® Pants 761.99 494.27 STRUCTURAL TURNOUTS CASCADE FIRE EQUIPMENT COMPANY n 31 GSA SCHEDULE GS-07F-0275Y KEVLAR®/NOMEX® 50163, 50166: Coat is shorter in the front and longer in the back. A 4-layer conventional collar also contributes to a more modern style. An overall great price/quality ration for a very well equipped gear. composite ƒƒ Outer shell: Kevlar®/Nomex IIIA® (Gold) ƒƒ Moisture Barrier: RT7100™ (Tpe 3D) ƒƒ Thermal liner: Xtra-Lite™ Chambray 7.3 osy Coat 50163 ƒƒ Conventional 4-layer collar (3”) ƒƒ Zip in liner attachment ƒƒ 32” style coat, special tail design and Retractable Action Back® ƒƒ Hook & loop 2” x 2” throat flap ƒƒ RHL® rounded hook & loop ƒƒ Semi set-in sleeves ƒƒ Zipper with hook and loop closure ƒƒ Radio pocket 8” x 4” x 2” with mic loop (left chest) ƒƒ Flashlight holder (clip with adjustable hook & loop fastener right chest) ƒƒ Two semi bellow 8” x 10” pockets ƒƒ Inside left pocket with hook and loop attachment ƒƒ NFPA style 3” triple trim (lime yellow/silver) ƒƒ Nomex® wristlets with thumb hole ƒƒ Ara-Shield® reinforcement on sleeve cuffs (gold) ƒƒ EME™ Enhanced Mobility Elbow Pants 50166 ƒƒ Regular waist ƒƒ Hook & D-ring + hook & loop fastener closure ƒƒ Two semi bellow 10” x 10” pockets ƒƒ Extra padding and EMK™ Enhanced Mobility Knee in AraShield® (gold) ƒƒ Ara-Shield® reinforcement on cuffs & knees (gold) ƒƒ Waist adjustment straps in black webbing ƒƒ Deluxe heavy duty removeable cotton suspenders 50163 50166 Innotex® Kevlar®/NOMEX® Coat Innotex® Kevlar®/NOMEX® Pants 849.52 584.74 STRUCTURAL TURNOUTS 32 n CASCADE FIRE EQUIPMENT COMPANY PBI®/KEVLAR® 50167, 50168: Innotex’s higher-end stock gear model. The composite being used provides about average TPP and THL as well as exceptional durability. This gear will bring satisfaction and comfort to the most demanding firefighter. composite ƒƒ Outer shell: PBI®/Kevlar® with Matrix™ Technology (Gold) ƒƒ Moisture Barrier: CROSSTECH® Black Type 2F ƒƒ Thermal liner: Quantum 3D™ 2L 7.7 osy Coat 50167 ƒƒ Unique patented BR-1 six-layer Collar® (3”) ƒƒ 32” style coat with Retractable Action Back® ƒƒ Hook & loop 2” x 2” throat flap ƒƒ Zip and hook and loop attachment ƒƒ RHL® rounded hook & loop ƒƒ Radio pocket 8” x 4” x 2” with mic loop (left chest) ƒƒ Flashlight holder (right chest) ƒƒ Two semi bellow 8” x 10” pockets ƒƒ VizGrip™ high visibility flaps ƒƒ Inside left pocket with hook and loop attachment ƒƒ NYC style 3” triple trim (lime yellow/silver) ƒƒ Nomex® wristlets with thumb hole ƒƒ Ara-Shield® reinforcement on sleeve cuffs (gold) Pants 50168 ƒƒ Regular waist/high back ƒƒ Hook & D-ring + hook & loop fastener closure ƒƒ Double fly protection on pants: 6 layers ƒƒ Two full bellow 10” x 10” x 2” pockets ƒƒ Ara-Shield® reinforcement on cuffs & knees (gold) ƒƒ Waist adjustments with Alligator clips ƒƒ Heavy duty quick adjust and removable “H” style Deluxe cotton suspenders with padding ƒƒ Extra padding and EMK® Enhanced Mobility Knee in AraShield® (gold) 50167 50168 Innotex® PBI®/Kevlar® Coat Innotex® PBI®/Kevlar® Pants 1.120.19 825.25 GSA SCHEDULE GS-07F-0275Y KEVLAR®/NOMEX®® 50159, 50164: The perfect gear for firefighters looking for a well-balanced price/quality ratio. Classical design and 6-layer patented BR-1™ collar will please any firefighter looking for tried and tested safety features. composite ƒƒ Outer shell: Kevlar®/Nomex IIIA® (Tan) ƒƒ Moisture Barrier: RT7100™ (Tpe 3D) ƒƒ Thermal liner: XTRA-Lite™ Chambray 7.3 osy Coat 50159 ƒƒ Unique patented BR-1® six-layer Collar™ (3”) ƒƒ 32” style coat ƒƒ Hook & loop 2” x 2” throat flap ƒƒ Zip and hook and loop attachment ƒƒ RHL® rounded hook & loop ƒƒ Radio pocket 8” x 4” x 2” with mic loop (left chest) ƒƒ Flashlight holder (clip with adjustable hook & loop fastener (right chest) ƒƒ Two semi bellow 8” x 10” pockets ƒƒ Inside left pocket with hook and loop attachment ƒƒ NFPA style 3” triple trim (lime yellow/silver) ƒƒ Nomex® wristlets with thumb hole ƒƒ Ara-Shield® reinforcement on sleeve cuffs (grey) Pants 50164 ƒƒ Regular waist ƒƒ Hook & D-ring + hook & loop fastener closure ƒƒ Two semi bellow 10” x 10” pockets ƒƒ Ara-Shield® reinforcement on cuffs & knees (grey) ƒƒ Waist adjustments with FR plastic buckles ƒƒ Heavy duty quick adjust and removable “H” style deluxe cotton suspenders with padding ƒƒ Extra padding in the knee 50159 50164 Kevlar®/NOMEX® Coat Kevlar®/NOMEX® Pants 781.56 554.58 FUSION™® 50172, 50173: Provides innovative features such as variable height collar and the VizGrip™ enhanced visibility pockets. Brings complete protection to firefighters wihile delivering newly available features. composite ƒƒ Outer shell: Fusion™ Solution Dye Nomex IIIA®/ Kevlar® and Teflon® F.P.P.E. (Black) ƒƒ Moisture Barrier: CROSSTECH® Black Type 2F ƒƒ Thermal barrier: Chambray 2-layers 7.0 osy Coat 50172 ƒƒ Variable height collar ƒƒ 32” style coat with Retractable Action Back® ƒƒ Hook & loop 2” x 2” throat flap ƒƒ Zip and hook and loop fastener ƒƒ RHL® rounded hook & loop ƒƒ Radio pocket 8” x 4” x 2” with mic loop (left chest) ƒƒ Flashlight holder ( right chest) ƒƒ Two semi bellow 8” x 10” pockets with VizGrip™ high visibility flaps ƒƒ Inside left pocket with hook and loop attachment ƒƒ NYC style 3” triple trim (lime yellow/silver) ƒƒ Nomex® wristlets with thumb hole ƒƒ Ara-Shield® reinforcement on sleeve cuffs (black) Pants 50173 ƒƒ Regular waist ƒƒ Hook & D-ring + hook & loop fastener closure ƒƒ Two full bellow 10” x 10” x 2” pockets ƒƒ EMK® Enhanced Mobility Knee in Ara-Shield® ƒƒ Ara-Shield® reinforcement on cuffs (black) ƒƒ Waist adjustments with Alligator clips ƒƒ Heavy duty quick adjust and removable “H” style Deluxe cotton suspenders with padding ƒƒ Extra padding in the knee 50172 50173 Innotex® NOMEX® Coat Innotex® NOMEX® Pants 931.90 679.62 STRUCTURAL TURNOUTS CASCADE FIRE EQUIPMENT COMPANY n 33 GSA SCHEDULE GS-07F-0275Y strike team fire gear From our NFPA-compliant clothing to our wide variety of gear bags and accessories, Strike Team® products use the best materials available to provide comfortable personal protection and quality gear for firefighters in any situation. Strike Team® Fire Gear offers variety and flexibility, with designs that adapt to meet our customers’ unique requirements. We are committed to providing wildland firefighters with the protection they need by produing the finest wildland clothing products in our ISO-certified sewing facility. All Strike Team® products are backed by Cascade Fire Equipment’s guarantee of quality, delivery, and customer support, and all of our products are made in the USA. iso/nfpa compliance Cascade Fire Equipment Company maintains its ISO 9001:2008 certification of registration from the Underwriters Laboratories (UL). The International Organization of Standardization (ISO) promotes the development of standards, testing and certification to encourage the trade of quality products and services localy, nationally and internationally. Their standards provide guidance in the development and implementation of an effective quality control management system. Cascade is committed to the ongoing obligation of maintaining the standards required for both the ISO certification and NFPA classification. We maintain internal quality control programs, and undergo an annual audit with UL, the most often used independent third-party witness to NFPA standard testing. Durable & flame resistant fabrics NOMEX® fabric is perfect for head-to-toe protection against flash fire, electric arc and other dangerous conditions. Lightweight, breathable fabrics made of Nomex ® combine unsurpassed flame resistance and exceptional durability wash after wash for the ultimate in comfort and durability. NOMEX® delivers peace of mind when lives are on the line. ƒƒ Proven Nomex performance – flame-resistant protection for a broad range of highrisk industries. ƒƒ Unbeatable durability – retains protective properties even after rugged use. ƒƒ Easy care comfort – proprietary wicking finish. Stays soft, keeps you cool and dry. Available in Yellow on our brush coats and pants and in Spruce Green and Navy on our Strike Team® brush pants. PBI Triguard is the new standard in value and performance. 5.3 osy Twill with Stay Dry Plus® superior water repellancy created for the Urban Search and Rescue, Emergency Medical Service and Wildlands firefighting markets. Provides a softer, lightweight, and more flexible fabric while maintaining unmatched thermal performance and strength. ƒƒ Superior resistance to puncture and tears, and an outershell that remains tough and rugged for reliable service life. ƒƒ “Breathable” - allows air to circulate around the body. ƒƒ Soft comfort and protective serviceability will not wear off or wash out even after countless machine washings. Available in Yellow on our brush coats and pants. Advance™ is a unique 60/40 blend of Kevlar® and NOMEX® that offers outstanding, uncompromised performance wildland firefighters require everyday. Kevlar ® is 5 times stronger than steel on an equal weight basis, yet, at the same time, it is lightweight, flexible and comfortable. This unique combination makes the Kevlar®/ AdvanceTM Strike Team® Pants the toughest garments we produce. Advance™ is high tensile strength at low weight. ƒƒ Lightweight, flexible, and comfortable ƒƒ Flame resistant, selfextinguishing ƒƒ Low thermal shrinkage ƒƒ High toughness (work-tobreak) Available in Spruce Green, Navy Blue, Khaki, and Yellow on our Strike Team® brush pants. STRIKE TEAM® FIRE GEAR - FABRICS 34 n CASCADE FIRE EQUIPMENT COMPANY Tecasafe® Plus delivers superior electric arc and flash fire protection in a comfortable lightweight fabric. ANSI 107 and CSA Z96 compliant for low visibility environments. Performs to the NFPA 70E and NFPA 2112 standards and lasts longer than FR treated fabrics, making Tecasafe Plus a great value. ƒƒ Unique FR protection comes built-in, and won’t wash out or wear out. ƒƒ Comfortable, soft and breathable with superior moisture management. ƒƒ Exceptional durability with outstanding abrasion resistance and better strength retention after multiple commercial washes. ƒƒ Retains like-new look and permanent pressed appearance. Available in Yellow on our brush coats and pants and Spruce Green and Navy on our Strike Team® brush pants GSA SCHEDULE GS-07F-0275Y face and neck protectors Our Face & Neck Protectors are made from highvisibilty 6 oz. yellow NOMEX®. The Standard and Super Deluxe models are also available in TECASAFE® Plus. (see facing page for fabric specs). The front of the shroud is secured with a self-fastening closure, and it can easily be attached to your helmet providing increased protection against heat. Fastening strips are included for use with a variety of helmet brands. All design requirements comply with NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting, 2011 Edition. Fabric meets flame resistant requirements of CAL OSHA Title 8 GISO Sections 3406(c)(1) and 3410(d)(1). 50016 50047 50013 STANDARD ƒƒ Includes 3 self-adhesive fastening strips DELUXE ƒƒ Flame-resistant INDURA® Ultra Soft® cotton inner-shell lining ƒƒ Includes 3 self-adhesive fastening strips SUPER DELUXE ƒƒ Attaches directly to your suspension for a more secure and comfortable fit ƒƒ Constructed for greater coverage ƒƒ More adjustment room across the front ƒƒ 5 oz. Nomex liner on interior 50030 50048 face and neck protectors 50016 50047 50013 50030 50048 Nomex® Standard Tecasafe® Plus Standard Nomex® Deluxe Nomex® Super Deluxe Tecasafe® Plus Super Deluxe 22.25 22.25 27.11 41.71 38.24 Certified NFPA 1977, 2011 Edition when worn correctly with Bullard Wildfire Helmet 911C Cap and 911H Full-Brim, certified NFPA 1977, 2011 fire fighting helmets. clothing repair kit Snagged on the fireline? Our clothing repair kits allow you to make repairs without missing any of the action. Each kit includes approximately one ¼ yard of Nomex®, or Kevlar®/ Advance™ material, matching Nomex®/Kevlar® thread, and a heavy duty hand sewing needle, in a Cordura pouch. Specify type of material when ordering. 50222 Clothing Repair Kit with Pouch 15.92 50223 Repair Kit without Pouch 11.94 clothing repair kit pouch FACE & NECK PROTECTORS CASCADE FIRE EQUIPMENT COMPANY n 35 GSA SCHEDULE GS-07F-0275Y wildland brush coats & pants vertical extension collar with storm flap closure adjustable sleeve cuff closure system Brass zipper with hook & loop storm flap radio pocket & Mic tab large hip pockets with hook & loop closure flaps back pockets with hook & loop closure flaps 2” elastic waistband with 6 belt loops optional trim deep front slash pockets 12” zipper and snap fastener 6” x 9” x 2” bellow pockets with closure flaps STRIKE TEAM® FIRE GEAR 36 n CASCADE FIRE EQUIPMENT COMPANY GSA SCHEDULE GS-07F-0275Y wildland brush coats & pants Strike Team® Fire Gear Brush Coats and Brush Pants come in a high-visibility yellow in your choice of flame resistant Nomex®, PBI Triguard™, or Tecasafe® Plus. Full-cut to allow freedom of movement in all aspects. Sewn to high quality standards with tough KEVLAR® and Tex 80 NOMEX® thread. Classified in accordance with NPFA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting, 2011 Edition. Fabric meets flame resistant requirements of CAL OSHA Title 8 GISO Sections 3406(c)(1) and 3410(d)(1). Optional Scotchlite Trim available on coats and pants. Optional double sleeves available on Brush coats. BRUSH COAT FEATURES ƒƒ All seams double stitched ƒƒ Zippers reinforced with triple stitches ƒƒ Shoulders, sleeves, collars, pockets, zipper front flaps and all other flaps double top stitched ƒƒ Pockets, pocket flaps, collar, collar flap, zipper, zipper flap bar tacked ƒƒ Single brass zipper front closure with Velcro storm flap ƒƒ Interior zipper flap prevents direct contact with wearer’s body ƒƒ Collar remains upright after extension into a vertical position with Velcro storm flap closure ƒƒ Sleeve cuffs have closure system with adjustable Velcro, for a snug fit around the wrist while wearing gloves ƒƒ Two large hip pockets with Velcro closure flaps ƒƒ Radio pocket sewn on left chest with mic tab Available in even numbered chest sizes 36 through 58. BRUSH PANT FEATURES ƒƒ All seams double stitched ƒƒ Zippers reinforced with triple stitches & interior zipper flaps ƒƒ Outer leg seams, pocket flaps, reinforced knees, fly and crotch double top stitched ƒƒ Pockets, pocket flaps, belt loops, fly and crotch bar tacked ƒƒ 2” elastic waistband with six belt loops ƒƒ Bellow pockets 6” x 9” x 2” with hook & loop closure on flaps ƒƒ Back pockets with hook and loop closure on flaps ƒƒ 12” zipper and snap fastener on lower outside leg Available in even numbered waist sizes 26 through 56 and even numbered leg lengths 28 through 36 TECASAFE PLUS COATS 32-46 48-50 52-54 56-58 50183 50183C5Y Tecasafe Plus Coat 141.66 156.57 164.03 171.49 with Lime Yellow Trim 178.94 193.85 201.31 208.77 50183C5R with Red Orange Trim 178.94 193.85 201.31 208.77 50183C3 Tecasafe Coat with Tecasafe Double Sleeves 6 OZ. NOMEX COATS 50197Y Nomex Coat 50197YC5Y with Lime Yellow Trim 50197YC5R with Red Orange Trim 50197YC3 PBI Triguard Coat 50194PC5Y with Lime Yellow Trim 50194PC5R with Red Orange Trim 50194PC3 chest SIZE 32-46 48-50 52-54 56-58 171.49 186.40 201.31 223.68 208.77 223.68 238.59 260.96 208.77 223.68 238.59 260.96 ADD 29.82 Nomex Coat with 5.8 oz. Nomex Double Sleeves PBI TRIGUARD COATS 50194P ADD 26.10 32-46 48-50 52-54 56-58 193.85 208.77 223.68 242.32 231.13 246.05 260.96 279.60 231.13 246.05 260.96 279.60 Triguard Coat with 5.8 oz. Triguard Double Sleeves 6 OZ. NOMEX PANTS 50189Y Nomex Pants 50189YC6Y with Lime Yellow Trim 50189YC6R with Red Orange Trim PBI TRIGUARD PANTS 50195P PBI Triguard Pants 50195PC6Y with Lime Yellow Trim 50195PC6R with Red Orange Trim TECASAFE PLUS PANTS ADD 33.55 WAIST SIZE 26-44 46-48 50-52 54-56 167.76 182.67 197.58 216.22 195.35 210.26 225.17 243.81 195.35 210.26 225.17 243.81 26-44 46-48 50-52 54-56 190.13 205.78 219.95 237.84 217.72 233.37 247.54 265.43 217.72 233.37 247.54 265.43 26-44 46-48 50-52 54-56 50184 50184C5Y Tecasafe Plus Pants 134.21 147.63 161.05 174.47 with Lime Yellow Trim 161.80 175.22 188.64 202.06 50184C5R with Red Orange Trim 161.80 175.22 188.64 202.06 how to measure ƒƒ CHEST: Measurement should be taken around the fullest part of the chest, just under the arms and across the shoulder blades. ƒƒ WAIST: Measure from where the top of your pants sit at your waist. ƒƒ INSEAM: Measure from high in the crotch to your anklebone. CASCADE FIRE EQUIPMENT COMPANY n 37 GSA SCHEDULE GS-07F-0275Y strike team® brush pants & shirts Designed to facilitate a quick switchover for action, these pants are rugged enough to meet the demands of wildland firefighting, yet comfortable enough to be worn around the station. STRIKE TEAM® Pants are full-cut to allow freedom of movement and are sewn to Cascade’s highest quality standards. Made of 7.5 oz. NOMEX® in Green or Navy, 7 oz. Tecasafe® Plus in Green or Navy, and 7 oz. Kevlar®/Advance™ in your choice of Green, Navy, Khaki, or Yellow. Classified in accordance with NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting, 2011 Edition (Men’s sizes only), and NFPA 1975, standard on Station/Work Uniforms for Emergency Services, 2014 edition. Fabric meets flame resistant requirements of CAL OSHA Title 8 GISO Sections 3406(c)(1) and 3410(d)(1) (Men’s and Women’s sizes). STRIKE TEAM® pants for WOMEN are designed to comfortably fit the female figure. Made to all the same high quality standards and specifications as our regular STRIKE TEAM® pants, our women’s pants feature a smaller rise and less “bulk,” allowing you to move freely on the fireline. PANT FEATURES ƒƒ All seams double stitched ƒƒ Zippers reinforced with triple stitches & interior zipper guard ƒƒ Outer leg seams, pockets, pocket flaps, fly and crotch double top stitched ƒƒ Pockets, pocket flaps, belt loops, hook and loop tabs, fly and crotch bar tacked ƒƒ 2” elastic waistband with six belt loops ƒƒ Zipper fly with snap closure & interior zipper flap to prevent direct contact with the wearer’s body ƒƒ Deep front slash pockets ƒƒ Rear pockets with hook & loop closure flap ƒƒ Fatigue style pockets 8” x 9” with hook & loop closure flap ƒƒ Leg cuffs have closure system with adjustable hook & loop, for a snug fit around the ankle while wearing boots Our STRIKE TEAM® wildland brush pants are setting the industry standard! Now in Tecasafe® plus. DUAL CERTIFIED STATION/BRUSH STRIKE TEAM® SHIRTS & PANTS 38 n CASCADE FIRE EQUIPMENT COMPANY GSA SCHEDULE GS-07F-0275Y strike team® brush pants & shirts pen pocket self-fastening storm flap closure sleeve cuffs with adjustable hook and loop closure system exterior pockets with button closure flaps STRIKE TEAM® Shirts come in a highvisibility yellow in either 6 oz. NOMEX® or 7 oz. Tecasafe® Plus and are sewn to Cascade’s highest quality standards. Fullcut to allow freedom of movement with all seams double stitched with Kevlar® and NOMEX® thread throughout. Classified in accordance with NFPA 1977, Standard on Protective Clothing and Equipment for Wildland Fire Fighting, 2011 Edition. Fabric meets flame resistant requirements of CAL OSHA Title 8 GISO Sections 3406(c)(1) and 3410(d)(1). Available in sizes XS – XXXXXL Optional double sleeves available upon request. SHIRT FEATURES 2” elastic waistband with 6 belt loops Fatigue style pockets 8” x 9” with hook & loop closure flap ƒƒ Manufactured in the U.S.A. ƒƒ Shoulders, sleeves, collars, pockets and all other flaps double top stitched ƒƒ Pockets, pocket flaps, collar and collar flap bar tacked ƒƒ Self-fastening storm flap closure keeps collar extended in upright position with hook and loop storm flap closure ƒƒ Sleeve cuffs have closure system with adjustable hook and loop, for a snug fit around the wrist while wearing gloves ƒƒ Exterior pockets have button closure flaps ƒƒ Pen pocket on sleeve STRIKE TEAM® SHIRTS PART Rear pockets with hook & loop closure flap adjustable leg cuff closure system 50178 50178 50182 50182 MATERIAL size 6 oz. NOMEX® 6 oz. NOMEX® 7 oz. Tecasafe® Plus 7 oz. Tecasafe® Plus XS-XL XXL & UP XS-XL XXL & UP price 119.40 139.29 111.44 128.95 Men’s pant sizes available in even numbered waist sizes 28 through 56 and even numbered leg lengths 28 through 36. Women’s sizes available in even sizes 2-14 with three inseam lengths; Petite (30”), Regular (32”), and Long (34”). STRIKE TEAM® PANTS PART MATERIAL 50189G 50189N 50180G 50180N 50190G 50190N 50190T 50190Y 7.5 oz. NOMEX® 7.5 oz. NOMEX® 7 oz. Tecasafe® Plus 7 oz Tecasafe® Plus 7 oz. Kevlar® Advance™ 7 oz. Kevlar® Advance™ 7 oz. Kevlar® Advance™ 7 oz. Kevlar® Advance™ WAIST SIZE women COLOR 26-44 46-48 50-52 54-56 2-14 p,r,l Green Navy Green Navy Green Navy Khaki Yellow 167.76 167.76 134.21 134.21 219.95 219.95 219.95 219.95 182.67 182.67 149.12 149.12 237.84 237.84 237.84 237.84 197.58 197.58 155.83 155.83 257.23 257.23 257.23 257.23 216.22 216.22 167.76 167.76 272.14 272.14 272.14 272.14 167.76 167.76 134.21 134.21 219.95 219.95 219.95 219.95 STRIKE TEAM® SHIRTS AND PANTS CASCADE FIRE EQUIPMENT COMPANY n 39 GSA SCHEDULE GS-07F-0275Y strike team® GEAR BAGS Features of all Gear Bags Constructed of sturdy 1000 denier DuPont Cordura®, designed to resist water, oil, & grease Built-in ID windows for visible & accessible identification Carrying handles made of durable polypropylene webbing fasten together for a cushion grip Reinforced with black polypropylene webbing Binding tape seams on the interior create a smooth finish ƒƒ 10x more durable than cotton duck ƒƒ 3X more durable than standard polyester ƒƒ 2x more durable than standard nylon Heavy-duty YKK zipper closures on all main compartments FORESTRY GEAR BAG DELUXE FORESTRY GEAR BAG Dimensions: 18”x12”x12” ƒƒ Zippered side pocket for smaller items ƒƒ Detachable shoulder strap ƒƒ Available in Red and Green with Yellow lettering (FIRE FIGHTER), and Black with red lettering (FIRE FIGHTER) Dimensions: 24”x12”x12” ƒƒ Available in Red with ƒƒ Main compartment: 18”x12”x12” Yellow lettering (FIRE FIGHTER) and Black ƒƒ Two cargo pockets: 12”x12”x3” with Red lettering ƒƒ Two side pockets: 15”x11”x3” (FIRE FIGHTER) ƒƒ Detachable shoulder strap 50084R Red w/Yellow lettering 50084BK Black w/ed lettering 50084G 48.46 48.46 Green w/Yellow lettering 48.46 STRIKE TEAM® GEAR BAGS 40 n CASCADE FIRE EQUIPMENT COMPANY 50010R Red w Yellow lettering 50010BK Black w/Red lettering 78.29 78.29 GSA SCHEDULE GS-07F-0275Y strike team® GEAR BAGS extra large gear bag Dimensions: 25”x14”x13” • Exterior zippered side pocket for smaller items: 11”x11” • Detachable shoulder strap • Main compartment zips completely open with heavy-duty YKK zipper closure ƒƒ Available in Red with Yellow lettering (FIRE FIGHTER) and Black with Red lettering (FIRE FIGHTER) 50083 Red with Yellow lettering (FIRE FIGHTER) 63.38 50083BLK Black with Red lettering (FIRE FIGHTER) 63.38 deluxe gear bag Dimensions: 32”x14”x13” ƒƒ Main compartment, 24”x14”x13”, with double heavy-duty YKK zippers that allow entire top of bag to open ƒƒ Cargo pouches on both ends: 14”x13”x4” ƒƒ Additional side pocket for smaller items ƒƒ Detachable shoulder strap 50091R Red with Yellow lettering (FIRE FIGHTER) 78.29 50091BK Black with Red lettering (FIRE FIGHTER) 78.29 STRIKE TEAM® GEAR BAGS CASCADE FIRE EQUIPMENT COMPANY n 41 GSA SCHEDULE GS-07F-0275Y strike team® GEAR packs crew bag Dimensions: 44”x14”x13” ƒƒ Extra large main compartment ƒƒ Zippered cargo pouches on both ends ƒƒ Zippered side pocket for smaller items ƒƒ Padded shoulder straps 50094 Red with Yellow lettering (FIRE FIGHTER) CREW PACK Dimensions: 30”x14”x9” • Five compartments • Heavy-duty zipper closures on main compartments and front pouch • Padded shoulder straps • Top and side carrying handles 50095 42 n CASCADE FIRE EQUIPMENT COMPANY Red Crew Pack 93.20 96.93 GSA SCHEDULE GS-07F-0275Y strike team® GEAR packs web gear STRIKE TEAM® Web Gear was designed to meet the needs of today’s wildland firefighter. It is both practical and comfortable to wear. The gear is comprised of three main components: the Waist Belt with equipment pouches, the detachable Shoulder Harness, and the detachable Web Pack. All Web Gear is made of 1000 denier Cordura® and black polypropylene webbing. 50026 Waist Belt Only 48.46 50027 Harness Only 18.64 50028 Web Pack Only 67.10 50029 Web Gear Complete 134.21 shoulder harness 50027 Web Harness ƒƒ Quickly detached or attached to the belt with quick-release buckles ƒƒ Adjustable to accommodate varied heights ƒƒ 3” wide shoulder padding for additional comfort ,, 6 wide waist belt 50028 web pack ƒƒ Secured with adjustable 2” synthetic strap and quick-release buckle ƒƒ Three removable equipment pouches, 8.5” x 4.5” x 1.5” ƒƒ Accommodates the new fire shelter web pack Dimensions: 11”x14”x 7” ƒƒ Main compartment, 14” x 11” x 5”, secured on three sides by a heavy-duty YKK zipper ƒƒ Two side pockets, 10” x 3” x 3” each with holders for 3 fuses ƒƒ Outer back compartment, 11” x 6.5” x 3”, with Scotchlite™ reflective strip and self fastening flap 50026 ƒƒ Convenient carrying handle on top waist belt STRIKE TEAM® GEAR PACKS CASCADE FIRE EQUIPMENT COMPANY n 43 GSA SCHEDULE GS-07F-0275Y strike team® hose packs Cascade’s Hose Packs are great for storing and transporting fire hose or other fire fighting material. All packs are made with 1000 denier Dupont Cordura®. Flap is secured by quick release buckles. Packs have 2” padded, adjustable shoulder straps and 2” adjustable waist strap with quick release buckle. CASCADE Dimensions: 22”x18”x4” ƒƒ Carries up to three 100 ft. lengths of 1” hose or two lengths of 1½” hose ƒƒ Ballistic Nylon base 50313 Cascade Hose Pack 55.92 APPLEGATE Dimensions: 22”x18”x4” ƒƒ Carries up to three 100 ft. lengths of 1” hose or two lengths of 1½” hose ƒƒ Full front opening under the flap secured by heavy duty 2” Hook & Loop ƒƒ Ballistic Nylon base 50315 Applegate Hose Pack 62.63 PHOENIX Dimensions: 22”x18”x4” ƒƒ Carries up to three 100 ft. lengths of 1” hose or two lengths of 1½” hose ƒƒ Large 6.5”x10”x2.5” pockets on each side for hose clamps & extra fittings ƒƒ Ballistic Nylon base 58.16 50316 Phoenix Hose Pack the fed Dimensions: 15”x15”x5” ƒƒ Specifically designed to easily deploy wildland hose ƒƒ Holds 100 ft. length of 1” hose and 100 ft. of 1½” hose ƒƒ Tough molded carrying handle ƒƒ Hose deployed from bottom of pack 50312 The Fed Hose Pack 50312G Green Fed Hose Pack 52.19 52.19 HOSE PACKS 44 n CASCADE FIRE EQUIPMENT COMPANY GSA SCHEDULE GS-07F-0275Y strike team® hose packs riverside hose pack ,, ,, ,, Dimensions: 19.5 x16 x8 ” ƒƒ Carries up to three 100 ft. lengths of 1” hose or two lengths of 1½” hose ƒƒ Flap secured by two 8”x2” hook and loop ƒƒ Wide 5”-6” adjustable, padded shoulder straps ƒƒ Constructed of sturdy 1000 denier DuPont Cordura® 50314 Riverside Hose Pack 50314: Extra wide padded shoulder straps 52.19 fireline hose pack ƒƒ Holds two lengths of 1½ ” x 100 ft. cotton or synthetic hose, and one 1” x 100’ ft. hose ƒƒ Each length is secured individually using 1” color coded nylon webbing and quick-release buckles ƒƒ Adjustable straps cinch the hose in tight. ƒƒ Entire load is secured with 2” adjustible polypropylene webbing ƒƒ Tough and durable webbing with reinforced seams ƒƒ Cordura® back with adjustable, padded straps for comfort under a heavy load 50321 Fireline Hose Pack 58.90 50321: Easily load and deploy progressive hose lays along the flanks of a wildland fire. EXTENDED LINE HOSE PACK Made from tough, durable polypropylene webbing, seat belt buckles, strong swivel clip buckles, and a sturdy handle, the Extended Line Hose Pack holds up to 200 feet of 1½” or 1¾” double jacketed hose. Used as a high rise pack or a quick and easy way to do an extended line operation. 50320 Extended Line Hose Pack 37.18 heavy-duty cordura® Cordura® is a material especially designed to resist water, oil, and grease. When put to the test, Cordura® resists tears, abrasions, and scuffs like no other fabric of its kind. Regardless of your activities, you’ll benefit from the toughness of Cordura®. Cordura® is a registered trademark of INVISTA for durable fabrics. HOSE PACKS CASCADE FIRE EQUIPMENT COMPANY n 45 GSA SCHEDULE GS-07F-0275Y gear holders With attention to detail, and quality you expect from Cascade, our Radio Holders are made from tough DuPont Cordura® and feature adjustable straps to keep any size of radio secure. Two extra pockets and a zippered storage pouch hold extra gear. Reflective strips on back for safety. strike team radio holder commander radio holder ƒƒ Adjustable neck and chest harness keeps your radio holder snug and in position ƒƒ Two angled slots designed for pens or pencils. ƒƒ Pocket with a self-fastening flap for extra radio batteries ƒƒ Hidden self-fastening pocket conveniently stores your map 50081 Strike Team Radio Holder The Commander Radio Holder does it all! An adjustable radio pocket and antennae loop keeps any size radio secure. There are pockets for extra batteries, GPS, or cell phone, a zippered storage pouch, and holders for your pens. An elastic notepad holder is released with detachable shoulder straps for taking notes on the go. ƒƒ Two additional pockets for extra gear Easily access ƒƒ D ring & three angled slots for pens a notepad by ƒƒ Zippered storage pouch releasing the ƒƒ Adjustable neck and chest harness shoulder straps. ƒƒ Notepad holder ƒƒ Reflective strips on back ƒƒ Quick release buckles and detachable shoulder straps 33.37 universal radio pouch Cascade’s Universal Radio Pouch holds a single radio and attaches to our Rogue firefighting pack or to any web gear shoulder strap. Dimensions: 8.5” x 3.5” and 2” deep ƒƒ Attaches with strong, durable snap ƒƒ Made from elastic webbing and cordura ƒƒ Adjustible strap with quick release buckle ƒƒ Keeps any size of radio secure and accessible 50051 Universal Radio Pouch 50520 The Commander Radio Holder glove holder ƒƒ Easy storage & immediate access to gloves at all times ƒƒ Secured by adjustable, self-fastening nylon strap ƒƒ D-Ring and Snap Ring to attach to clothing 13.90 50224 Glove Holder 7.65 fire shelter holders ENGINEER PACK FIRE SHELTER BELT Cascade’s Engineer Pack is a fire shelter holder designed specifically for heavy equipment operators required to carry a fire shelter. The pack fits comfortably on the front of the firefighter and is easily accessible. Fits both regular and large size shelters. Constructed of sturdy 1000 denier DuPont Cordura®. Adjustible elastic shoulder and waist straps. Includes straps for holding a radio, a side pouch, and two D rings. 50054 Engineer Pack 59.65 The Fire Shelter Belt was designed to allow firefighters to carry fire shelters, canteens and other equipment. Fabricated from 2” nylon webbing with adjustments for waist size and a quick-release buckle. Will hold both current and older style Fire Shelters. 50086 Fire Shelter Belt 16.52 47.61 RADIO HOLDERS - FIRE SHELTER HOLDERS 46 n CASCADE FIRE EQUIPMENT COMPANY GSA SCHEDULE GS-07F-0275Y CASCADE FIRE EQUIPMENT COMPANY federal supply schedule 084: Law Enforcement, Security, Fire, Rescue, Special Purpose Clothing, and Emergency/Disaster Response Fsc group: 42, Firefighting & Rescue Equipment Contract number: GS-07F-0275Y contract period: April 1, 2012 through March 31, 2017 contraCtor: Cascade Fire Equipment Company 640 Brian Way / P.O. Box 4248 / Medford, OR 97501 Phone: (800) 654-7049 / Fax: (541) 779-8847 Website: http://www.cascadefire.com / email: [email protected] CONTRACT ADMINISTRATION & sales support: business size: Don Lloyd Phone: (800) 654-7049 / Fax: (541) 779-8847 / email: [email protected] Small 1. Awarded SPECIAL Item Numbers: 465-11, 465-17, 465-19, 567-8, 567-15, 633-30, 633-38, 633-99 2. Maximum Order Limitations: $100,000.00 per order (SINS 465-11, 465-17, 465-19, 567-8, 567-15, 633-30) $50,000 per order (SINS 633-38, 633-99) 3. Minimum Order: $50.00 4. GEOGRAPHICAL COVERAGE: Domestic, 50 states, Washington, DC, Puerto Rico, US Territories and to a CONUS port or consolidation point for orders received from overseas activities. 5. Point of Production: Medford, Jackson County, Oregon 6. Discounts: GSA Net Prices as shown. Negotiated discount has been applied and the IFF has been added. 7. quantity/VOLUME discounts: Only certain items qualify. Consult Contractor for additional discounts 8. PROMPT payment terms: 1% /20 days, Net 30. Payments made using the Governmentwide commercial purchase card are not eligible for any negotiated prompt payment discount. Payment made using an ordering activity debit card will receive the applicable prompt payment discount. 9. Credit cards: Accepted above and below the micro-purchase threshold. 10. Foreign items: All end items are TAA compliant 11. Time of delivery: Shipped 3-90 days after receipt of order. Consult Contractor. EXPEDITED: 20 days depending on availabillity of the item. OVERNIGHT/2ND DAY DELIVERY: If available, contact Contractor for rates. Urgent Requirements: Contact CFE between the hours of 8AM and 5PM for emergency ordering. 12. FOB POINT: Destination (except for Alaska, Hawaii, and Puerto Rico) 13. Ordering address: Cascade Fire Equipment Company / 640 Brian Way, Medford, Oregon 97501 14. payment address: 15. Warranty provision: Phone: 800-654-7049 / Fax: 541-779-8847 Cascade Fire Equipment Company / P.O. Box 4248, Medford, Oregon 97501 Phone: 800-654-7049 / email: [email protected] The equipment is warranted for a period of one year from the date of shipment to the extent we will repair or replace such equipment if it is defective by reason of faulty material or workmanship, under normal use and service for the purpose of which it was designed. All costs including shipping charges to be borne by contractor. Please notify contractor before returning any goods. CASCADE FIRE EQUIPMENT COMPANY n 47 GSA SCHEDULE GS-07F-0275Y CASCADE FIRE EQUIPMENT COMPANY P.O. Box 4248 Medford, OR 97501 541-779-0394 800-654-7049 FAX: 541-779-8847 [email protected] www.cascadefire.com GSA SCHEDULE GS-07F-0275Y 48 n CASCADE FIRE EQUIPMENT COMPANY