Preview only show first 10 pages with watermark. For full document please download

Gt10 Series

   EMBED

Share

Transcript

PROGRAMMABLE LOGIC CONTROLLERS GRAPHIC OPERATION TERMINAL A versatile range of graphic terminals that fit to a diverse range of applications, Colorful Powerful Simple realizing affordability with basic functionality! Introducing the5.7"& 4.7" Versions! Unveiling the white frame model ! A versatile range of graphic terminals that fit to a diverse range of applications, realizing affordability with basic functionality! 5.7 GT1050 / GT1055 256 Colors or White/Blue 16 scales A GOT that incorporates GT10 functionality on a GT11 size display Featuring: - Bright STN backlight - 2 model types: 256 color model and 2 color (White & blue) model Debut! GT1050-QBBD White / Blue 16 scales Memory board interface Debut! USB interface Debut! Data transfer Memory board GT10-50FMB Screen Type 5.7’’ 5.7’’  GT1055-QSBD 256 colors Screen Resolution Backlight Touch Switch 320 dots STN White/Blue 16 scales 16×16 dots Matrix 50 /Screen STN 256 colors 16×16 dots Matrix 50 /Screen × 240 dots 320 dots × 240 dots User Memory (Project Data) Timer Connection Port Other functions 3 MB USB Built-in RS-422 Transparent mode Multi-unit connection OS preinstalled Versatile Layout 3 MB Built-in RS-232 USB RS-422 RS-232 Transparent mode Multi-unit connection OS preinstalled Versatile Layout GT1040 / GT1045 256 Colors or White/Blue 16 scales Introducing the new 4.7" (320 x 240 dots) screen size Featuring: - Bright STN backlight - 2 model types: 256 color model and 2 color (White & blue) model 4.7 Debut! GT1040-QBBD White / Blue 16 scales Memory board interface Debut! GT1045-QSBD 256 colors USB interface Debut! Screen Type 4.7’’ 4.7’’ Screen Resolution Backlight Touch Switch 320 dots STN White/Blue 16 scales 16×16 dots Matrix 50 /Screen STN 256 colors 16×16 dots Matrix 50 /Screen × 240 dots 320 dots × 240 dots User Memory (Project Data) Data transfer Memory board GT10-50FMB Timer Connection Port Other functions 3 MB USB Built-in RS-422 Transparent mode Multi-unit connection OS preinstalled Versatile Layout 3 MB Built-in RS-232 USB RS-422 RS-232 Transparent mode Multi-unit connection OS preinstalled Versatile Layout  A versatile range of graphic terminals that fit to a diverse range of applications, realizing affordability with basic functionality! 4.5 G T 10 3 0 Green/Orange/Red Version or White/Pink/Red Version Featuring: - 3-color LED backlight that offers a bright display even under external illumination - High resolution wide screen for intuitive screen designs Black GT1030-LBD Green Orange Red White/Blue White Orange Pink Red Red Green 256Color White/Blue Red 256Color White Pink Green Orange Red White/Blue White Orange Pink Red Red Green 256Color White/Blue Red 256Color White Pink frame GT1030-LBDW GT1030-LBD2 GT1030-LBDW2 White frame Debut!! GT1030-LWD Green Orange Red White/Blue Green Orange Red White/Blue White Orange Pink Red Green 256Color White/Blue White Orange Pink Red Red Green White/Blue 256Color White Pink Red 256Color Red 256Color White Pink GT1030-LWDW GT1030-LWDW2 GT1030-LWD2 GT10-LDR Memory Loader 3-Color Backlight Screen for Vivid Data Visualization The GT10-LDR -Offering screen colors that show the memory loader allows operating status of the application. simple transfer of OS -Enabling specification of color and and project data. flashing of the backlight for each screen. -Backlight control via the connected PLC*. * Color switching and backlight setting to ON, OFF or flashing Screen Type 4.5’’ Main unit model name Backlight LED-colors 288 dots STN 3-colors STN 3-colors 96 dots Orange Green Red Pink White Red × GT1030- LCD L STN Monochrome  Screen Resolution B W L Frame color Black White B D W Touch Switch 16×16dots Matrix 50/Screen User Memory (Project Data) Frame Color Timer 1.5MB White Frame Black Frame Built-in Connection Port 2 RS-422 RS-422 D Power supply DC24V Backlight color - Green / Orange / Red W White / Pink / Red 2 Communication type RS-422 RS-232 RS-232 RS-232 Other functions Transparent mode Multi-unit connection OS preinstalled Versatile Layout 3.7 G T 10 2 0 Green/Orange/Red Version or White/Pink/Red Version Featuring: - Ultra compact 3.7" Graphic Operator Terminal - Analog touch screen for super flexible screen layout Black frame Green Orange Red White/Blue White Orange Pink Red Red Green 256Color White/Blue GT1020-LBD White Orange Pink Red Red Green 256Color White/Blue GT1020-LBD2 White Pink Red 256Color Green Orange Red White/Blue White Orange Pink Red Red Green 256Color White/Blue White Orange Pink Red Red Green 256Color White/Blue Red 256Color White Pink GT1020-LBDW GT1020-LBDW2 GT1020-LBL GT1020-LBLW White frame Debut!! Green Orange Red White/Blue Green Orange Red White/Blue White Orange Pink Red Red Green 256Color White/Blue White Orange Pink Red Red Green 256Color White/Blue GT1020-LWD White Orange Pink Red Red Green 256Color White/Blue White Orange Pink Red Red Green 256Color White/Blue GT1020-LWD2 White Pink Red 256Color Red 256Color White Pink GT1020-LWDW GT1020-LWDW2 GT1020-LWL GT1020-LWLW GT10-LDR Memory Loader 3-Color Backlight Screen for Vivid Data Visualization The GT10-LDR -Offering screen colors that show the memory loader allows operating status of the application. simple transfer of OS -Enabling specification of color and and project data. flashing of the backlight for each screen. -Backlight control via the connected PLC*. * Color switching and backlight setting to ON, OFF or flashing Screen Type Screen Resolution 3.7’’ Main unit model name 160dots STN 3-colors STN 3-colors 64 dots Orange Green Red Pink White Red × GT1020- LCD L STN Monochrome Backlight LED-colors B W L Frame color Black White B D W Touch Switch 2×2dots Analog 50/Screen User Memory (Project Data) 512KB Frame Color White Frame Black Frame Connection Port 2 RS-422 RS-422 D Power supply DC24V Backlight color - Green / Orange / Red W White / Pink / Red 2 Communication type RS-422 RS-232 RS-232 RS-232 Timer Refer to PLC Other functions Transparent mode Multi-unit connection OS preinstalled Versatile Layout  Developed for the needs of industry ! A range of sizes,colors and connection methods to suit your needs. Reasons why GT10 series is becoming popular all over the world. Functionality -Multi-action switch replaces the need for overlay switches -Enhanced alarm functions for alarm display, + GT10 series - Combining affordability with history and scrolling functionality -Easy to use device monitor, recipe function and clock function - Offering a range of screen colors -Multi-language switching for display - Pre-installed OS for immediate use -Multi-unit connection (up to 2 units) -Firmware updates available from the Screen Design software, GT Designer2 3.7 4.5 Super-small display -inch -inch GT1020-LBD Green Orange Red White/Blue GT1020-LBD2 White Pink Red Green Orange Red White/Blue Red Red Red Red Red Red 256Color 256Color NEW GT1020-LWD Green Orange Red White/Blue NEW GT1020-LWD2 White Pink Red Green Orange Red White/Blue 256Color GT1020-LBDW White Green Green White White Green GT1020-LBDW2 White Pink Red Green Orange Red 256Color White/Blue NEW GT1020-LWDW2 White Pink Red Green Orange Red White/Blue GT1020-LBLW White Pink Red 256Color NEW GT1020-LWLW White Pink Red 256Color GT1020-LBL Pink Orange Orange Pink Pink Orange Wide screen White/Blue White/Blue NEW GT1020-LWL White/Blue NEW GT1020-LWDW 256Color 256Color White Green Green White White Green Pink Orange Orange Pink Pink Orange Red Red Red Red Red Red 256Color White/Blue White/Blue 256Color 256Color White/Blue White 256Color frame Debut!! GT1030-LBD GT1030-LBD2 GT1030-LBDW GT1030-LBDW2 Frame color Connection method  (DC24V) RS-232 (DC24V) RS-422 (DC5V FX Series only) Pink Orange Orange Pink Pink Orange White Pink Red Red Red Red Red Red Red Green Orange Red White/Blue Red 256Color White frame Green Orange Red White/Blue Red 256Color White Pink Green Orange Red White/Blue Red 256Color White Pink GT1020-LBD GT1020-LBDW GT1020-LBD2 GT1020-LBDW2 GT1020-LBL GT1020-LBLW White/Blue 256Color White/Blue White/Blue 256Color 256Color White/Blue 256Color 4.5-inch Black frame White Pink RS-422 White Green Green White White Green 3.7-inch Size Display colors Green Orange Red Black frame Green Orange Red White/Blue Red 256Color White Pink Green Orange Red Green Orange Red White/Blue Red 256Color White Pink GT1020-LWD GT1020-LWDW NEW NEW GT1020-LWD2 GT1020-LWDW2 NEW NEW GT1020-LWL GT1020-LWLW NEW NEW White Pink Red GT1030-LBD GT1030-LBDW GT1030-LBD2 GT1030-LBDW2 - - White/B 256C GT11 & GT15 - Taking display solutions to the next level! GT15 series A mid-level HMI range that provides an array of easy-to-use functions for stand alone use A progressive HMI range for a wide range of stand alone and networked applications 5.7 -inch Flexible and easy to use 5.7-inch Debut!! Green Orange Red NEWGT1055-QSBD White Pink Red Green Orange Red White/Blue 16 scales NEWGT1050-QBBD Red White Pink Red White Pink display White/Blue 256Color 256Color Green Orange Red Green Orange Red White/Blue 16 scales NEWGT1040-QBBD NEWGT1045-QSBD White Pink Red 256Color 4.7-inch White/Blue 256Color Debut!! 4.7 -inch Compact with vivid display White frame NEW GT1030-LWD Green Orange Red White Green Green White White Green NEW GT1030-LWD2 NEW GT1030-LWDW NEW GT1030-LWDW2 Pink Orange Orange Pink Pink Orange White Pink Red Red Red Red Red Red Red Debut!! White/Blue 256Color White/Blue White/Blue 256Color 256Color SIZE White/Blue 256Color 4.7-inch White frame Green Orange Red White/Blue Red 256Color White Pink 5.7-inch Black frame Green Orange Red /Blue Color GT11series White Pink Red GT1030-LWD GT1030-LWDW NEW NEW GT1030-LWD2 GT1030-LWDW2 NEW NEW - - White/Blue Green Orange Red 256Color White Pink Red White/Blue 16256Color scales Black frame Green Orange Red White/Blue Red 256Color White Pink GT1040-QBBD GT1045-QSBD NEW NEW - Green Orange Red White Pink White/Blue scales 256Color Red 16 Green Orange Red White/Blue Red 256Color White Pink GT1050-QBBD GT1055-QSBD NEW NEW -  GT10 MODEL Common Hardware Functionality GT10 MODEL Common Software Functionality WHY GT10? 1 GT10 MODEL Enhanced screen size lineup, ranging from small to medium From simple data transfer to screen design software The GT10 Series now incorporates a new model featuring a larger 5.7" screen that enables improved screen design flexibility. GT10 MODEL Version upgrade GT10 MODEL Performance Specifications 5.7 4.7 4.5 3.7 inch QVGA 320×240dots Matrix touch panel Minimum unit of touch key size:16x16dots Maximum number of touch keys: 50/Screen inch inch inch 5.7 4.7 4.5 3.7 inch inch QVGA 320×240dots Matrix touch panel Minimum unit of touch key size:16x16dots Maximum number of touch keys: 50/Screen Black Frame White frame inch WHY GT10? inch Black Frame 288×96 dots Matrix touch panel inch Minimum inch touch screen size: 16x16 dots inch Maximum number of touch keys: 50/Screen 5.7 4.7 4.5 3.7 inch inch White frame 160×64 dots Analog touch panel inch Minimum touch screen size: 2x2 dots Maximum number of touch keys: 50/Screen 5.7 4.7 4.5 3.7 inch inch Similar dimensions to F900 Series allows simple replacement without panel design changes *1 2 The GT1050/GT1055 has the same panel mounting dimensions as the The GT1030 has the same panel mounting dimensions as the F930GOT yet F940GOT. with improved resolution*2 . 320 dots 240 dots 320 dots F930GOT GT1050/GT1055 240 dots F940GOT GT1030 240 x 80 dots resolution 288 x 96 dots resolution 288 dots 240 dots QVGA 320 x 240 dots in each model F940GOT 80 dots GT1050/GT1055 96 dots GT1030 +1 -0 Same panel cutting dimensions 66 121 +1 -0 F930GOT 57 56 49 153 +1 -0 Same connection direction for the communication connector Unit : mm 29.5 Slim design *1: When the F940GOT is replaced with the GT1050/GT1055 or when the F930GOT is replaced with the GT1030  Same panel cutting dimensions 137 +1 -0 Unit : mm *2: 1.44 times compared with the F930GOT WHY GT10? 3 Transparent function connecting the PLC via the GOT Through the personal computer communication connector at the rear of the GOT, users can debug, start and adjust sequence programs. Communication port: 3 channels Connection cable RS-232 (PLC or PC connection) GT01-C30R2-9S RS-422 Memory board interface Battery board iterface FX/Q/QnACPU Connecting directly Q/QnACPU Serial communication unit connection Connection cable GT09-C30USB-5P (3m) Transparent Function GX Developer Connected to the PLC via the GOT (USB or RS-232) Communication port: 2 channels Connection cable RS-232:GT01-C30R2-6P(3m) RS-422(Removable type) or RS-232(Removable type) or USB:GT10-RS2TUSB-5S +GT09-C30USB-5P(3m) FX/Q/QnACPU Connecting directly Q/QnACPU Serial communication unit connection Transparent Function GX Developer Connected to the PLC via the GOT (RS-232) WHY GT10? 4 WHY GT10? Multi-terminal connection*3 5 Versatile mounting Up to two GT10 units can be connected to one PLC unit even if the screen Both hor izont al and ver tic al sizes differ. Thus enabling greater flexibility with terminal positioning. mounting is available to the GT10 Series causing minimum impact to the application design. When RS-422 is used to connect the 1st unit*4 FX,A,QnA FX,A,QnA RS-422 RS-422 Maximum30m Maximum30m RS-232 RS-232 Maximum15m Maximum15m When RS-232 is used to connect the 1st unit*4 FX,Q FX,Q RS-232 RS-232 Maximum15m Maximum15m Cable Cable GT01-C30R2-9S GT01-C30R2-9S WHY GT10? 6 Power Supply & Communication Applicable models Cable Cable Made Madeby bycustomer customer RS-422 RS-422 Maximum30m Maximum30m The 5V DC type GOT draws power through the FX programming port communication cable. Additional power supply not required. Power Supply and Communication FX/Q/QnA/ACPU Connecting directly RS-422 or RS-232 Connection type RS-232 Connection type GT1020-LBL GT1020-LBLW GT1020-LWL GT1020-LWLW NEW NEW FX Series PLC RS-422 Maximum30m or RS-232 Maximum15m GT10-C30R2-6P Maximum 3m *3: The transparent function is not available when multiple units are connected. The USB interface is not available for connection of two units. *4: Refer to the connection manual for applicable models, required interface and compatibility with serial communication units (computer link units). The maximum length varies depending on the connected equipment. Refer to the connection manual for details.  GT10 MODEL Common Hardware Functionality GT10 MODEL Common Software Functionality GT10 MODEL From simple data transfer to screen design software WHY GT10? 8 GT10 MODEL Alternative start-up screen Version upgrade WHY GT10? Multi Action Switch 11 Alternative bitmap images can be displayed when the GOT starts. Images Because one switch can determine multiple functions, it is not necessary to may include photos, company logos etc. overlay different switches types for each function. GT10 MODEL You can reduce loads on sequence programs by combining the settings of delay, Performance Specifications (The logo label “GOT1000” can also be removed.) repetition, interlock, etc. according to the operations within the PLC. Screen switching Switch ON/OFF Data setting Interlock One-touch WHY GT10? 9 WHY GT10? Choose your font! 12 Security Format String function A variety of fonts are available including the standard type set and the The GT10 c an display charac ter s (alphabets, number s, kanji and windows type set. When windows fonts are selected, italic, underlined and symbols) in the device value display underlined italic are also available. When the formatted character string in the basic settings is set as follows ##m ##cm When the device value is “1234” 12m 34cm WHY GT10? 13 Simple set-up of language switching windows Language switching windows can be easily created allowing one language to be switched to another, for example English to Japanese. Up to 10 languages can be switched per comment group. Window switching can take place not only for languages but also for different applications. WHY GT10? 10 Design unification using the parts library English Japanese Lamps and switches can be selected from the Screen Design Software's built in library. Alternatively new parts can be downloaded from the web. Library images can be displayed in all colors. WHY GT10? 14 Characters from all over the world for people all over the world The GOT1000 series can display a number of languages for a variety of countries and areas. Monochrome Soft AV Crystal Real 10 WHY GT10? 15 WHY GT10? Device monitor function 18 Simple data setting using the recipe function You can monitor the ON/OFF status of bit devices and values of word The GOT has a built-in memory for up to 4,000 points (corresponding to devices in FX/Q/QnA/A Series PLCs, as well as change the timer and 16-bit word devices). Using this memory the GOT can transfer a range of counter values. values to and from the PLC. Recipe function Read Write Recipe 1 Recipe 2 Cut size : large Cut size : small D0 2000 D0 1000 D1 5000 D1 2500 D2 6000 D2 3000 GT1055 WHY GT10? 16 Preinstalled OS to enable immediate use WHY GT10? 19 Alarm function Pre-installed OS The GOT offers alarm display, alarm history and alarm scroll functions to The OS of the GOT is installed before shipment from the factory. enable display setting for each window. Language switching for alarms is also available. Communication driver You can set alarm scroll, color and display position. The communication driver mounted before shipment is provided for an FX Series PLC. To connect a Q/QnA/A Series PLC, microcomputer board or other supported PLC device you have to install the required communication driver available from GT Designer2. When using a GOT together with a FX PLC, all that PLC is required is to download the project data. WHY GT10? 17 GT1055 WHY GT10? Sequence program edition 20 Applicable models : Screen save function The backlight ON/OFF setting achieves energy-saving whilst enabling the GOT to function. The GOT screen can be controlled from the PLC, allowing backlight and alarm windows to be controlled in the event of an error. You can edit sequence programs in the list format of the FX PLC in the GOT. This function is convenient for simple program changes in the local site. WHY GT10? 21 Functionality • Screen : 1,024 base screens max + 512 windows max Features • Screen switching function, screen call, language switching function, password protection, system information, connected equipment setting and startup logo Figure drawing Straight line, continuous straight line, rectangle, polygon, chamfered rectangle, circle, ellipse, circular arc, elliptical arc, circular sector, elliptical sector, scale display, painting and image type (BMP/DXF) Comment registration (basic comment and comment group), object registration, data calculation function, offset function, security function, lamp display, touch key, numerical display and input, Object ASCII display, clock display (linked to PLC clock), comment display, alarm list, alarm history, alarm scroll, object display, panel meter, trend graph, line graph, bar graph, state monitoring function, recipe function (4,000 points) and time action function, Device monitor function GT1055 11 GT10 MODEL Common Software Functionality GT10 MODEL From simple data transfer to screen design software GT10 MODEL Version upgrade WHY GT10? Data transfer for improved user-friendliness and flexibility GT10 MODEL 22 Performance Specifications Optional memory board and memory loader provide a convenient way to download project data and operating system to terminals without a PC. Furthermore when downloading to multiple units speed and efficiency is increased. 34.8 Data transfer memory board GT10-50FMB Basic OS, communication driver Debut! and project data Read/Write 36 Unit : mm Illustration showing how the memory board is attached to the terminal Data can be read or written as shown in the utility window above. Data is written at startup when two points are pressed on the screen. Memory loader GT10-LDR -Has a compact design (70 × 110 mm), where the GOT transfer cable can be accommodated inside the body. -Can write the basic OS, communication driver and project data. -Can read the project data and resource data. -Offers simple switch type operation, where the write-protect switch prevents erroneous reading. - Does not require power supply as power is supplied from the GOT or personal computer. 110 At the desk... Standard monitor OS, communication driver project data, resource data*1 Read/Write 70 Unit : mm USB cable (1 m) packed together PC (GT Designer2) GT10-LDR ...on location Standard monitor OS, communication driver project data, resource data*2 Read/Write RS-232 transfer cable (0.2 m) incorporated GT1020/GT1030 *1: The basic OS and communication driver can be written only, and resource data can be only read. *2: Resource data can be only read. WHY GT10? 23 Intuitive screen design software GT Designer2 is an intuitive screen design software that interfaces with the entire GOT1000 Series. The latest version of the software is more user friendly and features the latest functions. Transfer Version2 - Offers useful functions - Supports creative screen designs. Work space A simple tree display that makes copying, deleting and registering of screens easy. Property sheet Details screen object 's proper ties for quick parameter changes. 12 Screen creation GOT Parts library Image display of registered components that makes selecting components easy, and thus improves the efficiency in which screens are created. Dialog box Object and figure setting screen that can be accessed by a simple double click of the screen objects. GT10 MODEL From simple data transfer to screen design software GT10 MODEL Version upgrade By using the latest version screen design software, the GOT firmware can also be upgraded to the latest version. GT10 MODEL WHY GT10? 24 Performance Specifications Device monitor function WHY GT10? Ver. 2.82L or later Enhanced alarm functions 25 By specifying a device in the connected PLC, you can monitor and change it. Ver. 2.73B or later Comment groups are available in the alarm history function. Comments can be scrolled on an arbitrary window while the alarm history is displayed GT1020 screen GT1030 screen Bit device: Monitoring status and forcing bits ON/OFF Word device: Monitoring of the set value and current value, and setting new values. WHY GT10? 26 Enhanced window functions WHY GT10? Ver. 2.73B or later WHY GT10? 28 Ver. 2.77F or later Improved connectability 27 - 512 windows are available. - The window overlay function is available - The window superimpose function is provided This window pops up on the base window. GT1020 screen GT1030 screen -The MELSEC QnU Series is connectable. -The transparent function is available for the serial communication unit QJ71C24N. -The CC-Link connection (via the G4) is supported. This window is composed on the base window. Ver. 2.73B or later Connection to the Mitsubishi inverter series Direct connection to the inverter facilitates direct control. GT10 Series allows direct connection of inverters allowing enhanced control. Operation command Applicable models S500 A700 A500 F700 F500 E700  V500 Monitoring Monitoring and changing of inverter parameters from the GOT improves operability and reduces setup time. WHY GT10? 29 Connection to the bar code reader Ver. 2.77F or later The RS-232 connection port for personal computer can be connected to a bar code reader. 1234 Bar code reader DataRegister D1000 RS-232 GT1020 or GT1030 image 1234 PLC GT10-C02H-6PT9P 13 GT10 MODEL Version upgrade GT10 MODEL Performance Specifications GT10 common specifications General Specifications Specification Item Ambient operating temperature Maximum voltage*5 Excluding display area: 0 to +55ºC (horizontal layout) or 0 to +50ºC (vertical layout) Ambient storage temperature Intermittent vibration Continuous vibration 500 VAC, 1 min (between all power terminals and ground) Insulation resistance*5 -20 to +60ºC (Ambient operating/storage humidity*1 : 10 to 90% RH, no dew condensation) Vibration resistance Specification Item Display area: 0 to +50ºC Frequency Acceleration Amplitude Vibration testing 5 to 9 Hz 3.5mm repeated 10-times 9 to 150Hz 9.8m/s2 in the X, Y and Z 5 to 9Hz 1.75mm planes. 9 to 150Hz 4.9m/s2 10 MΩ or more by 500 VDC insulation resistance tester (between all power terminals and ground) Ambient atmosphere Free from soot, corrosive gas, flammable gas, and high levels of conductive dusts Protective structure against environment Equivalent to IP67f (JEM 1030) (front face) (This structure does not provide protection against all environmental conditions in your site.) Class D grounding (insulation resistance: 100Ω or less When grounding is disabled, perform grounding to the panel.) Grounding*5 Operating height above sea level*2 : 2,000 m or less, Installation location: Inside control panel, Over-voltage category*3 : II or lower, Pollution level*4 : II or lower, Cooling Method: Self-cooling Others In conformance to IEC 61131-2 Impact resistance In conformance to IEC 61131-2 (147 m/s , application period: 11ms, sine half-wave pulse, 3 times in each of X, Y and Z directions) Noise resistance Noise voltage: 1,000 Vp-p, noise width: 1μs (Testing via a noise simulator whose noise frequency (range 30 to 100 Hz) 2 *1 Wet bulb temperature: 39ºC or less *2 Never use the GOT in an environment that is pressurized to an atmospheric pressure above the height of sea level as the GOT may mulfunction. *3 The over-voltage category indicates the equipment is connected to a power distribution area between the public power distribution network and the machine site. Category II is applied to equipment supplied by a fixed power source where the resistance voltage is 2,500 V in equipment whose rating is 300V or less. *4 This index indicates the level of conductive substances in the environment where the equipment is used. Level 2 is applied to environments where only non-conductive pollution is generated but temporary conductive states can occur through condensation of the environment. *5 This cable cannot be used for GT1020-LBL(W). GT1050/GT1055,GT1040/GT1045 specifications Performance specification Item GT1050-QBBD STN monochrome (white and blue) liquid crystal Type Screen size/resolution Display size (mm) Display area Number of displayed characters For 16-dot font For 12-dot font View angle(in horizontal display mode) GT1055-QSBD GT1040-QBBD GT1045-QSBD STN color liquid crystal STN monochrome (white and blue) liquid crystal STN color liquid crystal 5.7-inch/QVGA:320W×240H dots 4.7-inch/QVGA:320W×240H dots 115(W)×86(H) (5.7-inch) horizontal display mode 96(W)×72(H) (4.7-inch) horizontal display mode 40 half-width characters x 15 lines or 20 full-width characters x 15 lines when horizontal mounting 53 half-width characters x 20 lines or 26 full-width characters x 20 lines when horizontal mounting Right/Left:45° Right/Left:55° Right/Left:45° Right/Left:50° UP:20°,Down:40° UP:65°,Down:70° UP:20°,Down:40° UP:40°,Down:70° monochrome 16 scales 256 colors monochrome 16 scales 256 colors 260[cd/m2] 380[cd/m2] 300[cd/m2] 150[cd/m2] Contrast adjustment Display colors Intensity 16 step adjustment Life Approx.50,000hours (operating ambient temperature 25°C) Type Backlight (no replacement required) Touch panel Cold-cathode fluorescent tube (not replaceable) Backlight off time and screen save time can be set. Approx.75,000 hours (Time for display intensity reaches 50% at Life Backlight off time and screen save time can be set. — operating ambient temperature of 25°C) Maximum number of touch keys 50 keys/screen (matrix consisting of 15 lines × 20 columns) Minimum unit of touch key size Min. 16 × 16 [dots] (per key) No. of simultaneous touch points Max. 2 points Life 1,000,000 times or more Single tone (Long sound, short sound or no sound can be selected.) Buzzer output (buzzer sound issued when a touch key is pressed) Memory White LED (not needed) With backlight OFF detection function. Function User memory Built-in flash ROM [To store project data (3 MB or less), OS, alarm history and recipe data] Life (number of times of writing) 100,000 times GT11-50BAT lithium type battery Battery Backed up data Life Type RS-422 Clock data, alarm history and recipe data Replacement cycle: 5 years (at ambient operating temperature of 25ºC) RS-422, 1ch, Transmission speed: 115200/57600/38400/19200/9600/4800 bps Connector shape ReceptacleD-sub 9-pin (female) Application Type Built-in interface RS-232 Communication with connected devices RS-232, 1ch, Transmission speed: 115200/57600/38400/19200/9600/4800 bps Connector shape Application D-sub 9-pin (male) Communication with connected devices,connection to personal computer (project data upload/download, OS installation, transparent function) Type USB USB (full speed: 12 Mbps), device 1ch Connector shape Application Mini-B(receptacle) Connection to personal computer (project data upload/download, OS installation, transparent function) Memory board interface Weight GT10-50FMB (option)slot, Application:Data transfer 0.7 [kg] (excl. fittings) Applicable software package Supply voltage DC24V(+10% to -15%),ripple voltage of 200mV or less Fuze (not replaceable) Power consumption [ ]:with backlight off 1.0A 9.36W or less (390mA/DC24V) 9.84W or less (410mA/DC24V) 3.6W or less (150mA/DC24V) [4.32W or less (180mA/DC24V)] [4.32W or less (180mA/DC24V)] [2.9W or less (120mA/DC24V)] Inrush current Permissible instantaneous failure time About the accessible machinery (sequencer, a bar-code reader), please refer to a GOT1000 series connection manual. 14 0.45 [kg] (excl. fittings) GT Designer 2 Version 2.90U or later 15A or less (2ms, at max. load) Up to 5ms GT1030/GT1020 specifications Performance specification Item Type Screen size/Resolution Display size (mm) For 16-dot Number of font displayed Display area For 12-dot haracters font GT1020- ®®®®® LBDW2 LBD LBD2 LBL LBDW LBDW2 LWDW2 LWD LWD2 LWL LWDW LWDW2 STN monochrome (black and white) liquid crystal 4.5-inch/288 (W) x 96 (H) dots 3.7-inch/160 (W) x 64 (H) dots 109.42 (W) x 35.98 (H) (4.5-inch) in horizontal mounting 86.4 (W) x 34.5 (H) (3.7-inch) in horizontal mounting LBD LWD GT1030- ®®®®® LBD2 LBDW LWD2 LWDW LBLW LWLW 36 half-width characters x 6 lines or 18 full-width characters x 6 lines when horizontal mounting 20 half-width characters x 4 lines or 10 full-width characters x 4 lines when horizontal mounting 48 half-width characters x 8 lines or 24 full-width characters x 8 lines when horizontal mounting — View angle 30 degrees leftward, 30 degrees rightward, 20 degrees upward and 30 degrees downward when horizontal mounting Contrast adjustment 16 steps 2 200[cd/m ] 300[cd/m2] 200[cd/m2] 300[cd/m2] Intensity Life Approx. 50,000 hours (Ambient operating temperature: 25ºC), Guarantee: 1 year (time when contrast becomes 1/5 at ambient operating temperature of 25ºC) Color 3-color LED (green, orange and red) 3-color LED (white, pink and red) 3-color LED (green, orange and red) 3-color LED (white, pink and red) Backlight (not requiring Brightness adjustment 8 steps — replacement) Function Status (color and ON/flickering/OFF) can be controlled, and screen saving time can be set. Color and status of backlight can be controlled from PLC. Maximum number of 50/screen (matrix resistive film type, 18 x 6) 50/screen (analog resistive film type) touch keys Minimum unit of touch 16 x 16 dots (per key) 2 x 2 dots (per key) Touch panel key size Simultaneous pressing Permitted Not permitted*1 (2 touch keys) Life 1,000,000 times or more (pressing force: 0.98 N or less) Buzzer output (buzzer sound issued Single tone (Long sound, short sound or no sound.) when a touch key is pressed) Built-in flash ROM Built-in flash ROM User memory [To store project data (1.5 MB or less) and OS] [To store project data (512 kB or less), OS, alarm history and recipe data] Memory Life (number of times of 100,000 times writing) Built-in lithium battery GT11-50BAT to store clock data, Battery alarm history and recipe data, replacement cycle: 5 years — (at ambient operating temperature of 25ºC) Serial Serial Serial Serial Serial Serial Serial Serial Serial Serial RS-422 RS-232 RS-422 RS-232 RS-422 RS-232 RS-422 RS-422 RS-232 RS-422 For communication with PLC In conformance to standard (insulation type), 1 channel, transmission speed: 115,200/57,600/38,400/19,200/9,600/4,800 bps, Built-in interface connector shape: 9-pin type connector terminal board In conformance to serial RS-232 standard (insulation type), 1 channel, transmission speed: For communication with personal computer 115,200/57,600/38,400/19,200/9,600/4,800 bps, connector shape: 6-pin type mini DIN (female) Applicable software package GT Designer2 Version 2.90U or later 5 VDC (±5%) 5 VDC (±5%) 24 VDC (+10%, -15%) 24 VDC (+10%, -15%) 24 VDC (+10%, -15%) Supply voltage (24 V type has built-in Supplied from Supplied from fuse, and cannot be replaced.) [Ripple voltage: 200 mV or less] [Ripple voltage: 200 mV or less] [Ripple voltage: 200 mV or less] PLC PLC 1.1W or less 1.1W or less Power consumption [ ]:With backlight off 2.2W or less (90mA/DC24V), 1.9W or less (80mA/DC24V), (220mA/DC5V), 1.9W or less (80mA/DC24V), [1.7W or less (70mA/DC24V)] [1.2W or less (50mA/DC24V)] [0.6W or less [1.2W or less (50mA/DC24V)] (120mA/DC5V)] Inrush current Permissible instantaneous failure time (220mA/DC5V), [0.6W or less (120mA/DC5V)] 18A or less (DC26.4V) 1ms 13A or less (DC26.4V) 1ms — 13A or less (DC26.4V) 1ms — Up to 5ms Up to 5ms — Up to 5ms — *1 If there is a key around the center of the pressed area when two or more keys are pressed, the key in the center may be activated. 15 Function list Functions GT10 GT11 GT15 OS Pre-install Boot OS installation l — — OS installation l — — l functions Object setting Main unit functions GT11 GT15 — — Alarm list display l l l*2 l Alarm history display l l l*2 l l*2 Floating alarm display Parts display l l l*2 — — — l — — — Parts movement — l — — Panel meter display l l l*2 l English l — — Level display — l l Korean — — — Trend graph l l l Boot OS installation — l l Historical trend graph* — — l OS installation l l l Line graph,Bar graph l l l Start from CF card — — l Statistical graph l l l Scatter graph — l l Communication driver Japanese Font Pre-install Chinese (Simplified) (onlyFX)*1 Graph 5 Project data download/upload Usable also on memory board l — — Usable also on CF card — l l Status observation function l l l Resource data upload Usable also on CF card — l l Extended recipe function — — l*2 Transparent function l l l Recipe function l Multi-channel function(Max 4ch) — — l Time action function l l*2 l l*2 l Gateway function — — l*2 Report function File saving in CF card — — l MES interface function(Option function board is required) — — l*2 File saving in CF card — — l l l Print out — — Barcode function l l l*6 l RFID function — l l Vertical display l l — — — l — — l — — l Multi-unit connection Hardcopy function — MAX 2 unit MAX 2 unit Other Screen design Sound output function* 7 Specifications Base screen l l l External input/output function* Superimposed window display l l l Operation panel function* Overlap window display l l l Screen call function l l l Dialog window display — l l Operation log function File saving in CF card — — l BMP image display l l l JPEG image display — — l Document display function (Option function board and CF card required) — — l DXF data l l l Logging function IGES data — l l Standard fonts(basic)*3 l l l Standard fonts(optional)*4 — — l High-quality font l l l True Type font l l l Supported image data format Fonts Script function 8 8 — — l Project script — l l Screen script — l l Object script — — l — — l Device data transfer function Common settings Object setting Windows® font l l l Maintenance functions Stroke basic font (extended) — — l Device monitor function l l l Stroke font (optional) — — l System monitor function — l l Japanese l l l List editor for A — l*9 l Chinese (Simplified) — l l List editor for FX l*10 l*11 l German — l l Ladder monitor function — — l English l l l Intelligent unit monitor function — — Korean — l l Q motion monitor function — — l*12 l Chinese (Traditional) — — — Servo amplifier monitor function — — l Parts (object + figure) layer function — l l Network monitor function — — l Screen switching l l l Backup/restoration function — — l Station No. switching — — l Maintenance time notification function* — — l Multilingual support function l l l Password l l l System information l l l Connected device setting l l l Boot logo l l l Comment registration l l l Parts registration l l l Data operation function l l l *4:Chinese (Simplified),Chinese (Traditional),Japanese *5:Combination of logging function *6:Printer unit is required *7:Sound output unit is required *8:External I/O unit is required Offset function l l l *9:The GT115o-QoBDQis not applicable Security level authentication l l l Operator authentication — — l Lamp display l l l *10:Supported only by GT105o *11:Only serial communication type *12:Supported only by GT1555-VTBD *13:Battery is required Touch switch l l l Numeric display/input l l l Data list display — l l System language switcing Security function 16 GT10 Extended alarm monitoring/display ASCII display/input l l l Kana-Kanji conversion function — — l Clock display l l l Comment display l l l 13 *1:You have to install the required communication driver available from GTD2 *2:CF cards are necessary conditions maybe *3:Suported GT10:European(Japanese),GT11,GT15:European(Japanese,Chinese) For further details on using these features please refer to the manual. Dimensions 6 120 121 GT1050/GT1055 panelcut outsize same as F940 GOT USB 135 RS-422 +2 -0 RS-232 Panelcut 164 153 +2 -0 56 Unit: mm Outer color: Black Weight: 0.7kg(excluding metal fixtures) Accessories: Metal fixtures for mounting to panel packing 5 +1 103 -0 102 USB RS-422 112 RS-232 Panelcut 139 130 +1 -0 41 Unit: mm Outer color: Black (RS-422) (RS-232) 145 Panelcut (common) SD RD ER DR SG RS CS NC NC + INPUT +1 - 24VDC (FG) 66 -0 76 65 SDA SDB RDA RDB SG RSA RSB CSA CSB Weight: 0.45kg(excluding metal fixtures) Accessories: Metal fixtures for mounting to panel,packing GT1030 panelcut outsize same as F930 GOT 137 29.5 +1 -0 Unit: mm Weight: 0.3kg(excluding metal fixtures) Outer color: Black Frame or White Frame Accessories: Connector for communication with PLC Metal fixtures for mounting to panel DC5V 27 SD RD ER DR SG RS CS NC NC + INPUT - 24VDC (FG) SDA SDB RDA RDB SG RSA RSB Panelcut +1 -0 65 74 113 SDA SDB RDA RDB SG RSA RSB CSA CSB RS-422 ( RS-422) (RS-422) ( RS-232) (common) 66 DC24V -- INPUT + 5VDC 5 VDC is supplied from PLC by way of dedicated cable. +1 105 -0 Unit: mm Weight: 0.2kg(excluding metal fixtures) Outer color: Black Frame or White Frame Accessories: Connector for communication with PLC Metal fixtures for mounting to panel 17 System Configuration RS-422 (24 V DC Power supply) RS-422 (24 V DC Power supply) GT1050-QBBD GT1055-QSBD RS-232 NEW NEW 24 VDC Power supply RS-422 RS-422 24 VDC Power supply Connection Cables GT01-C10R4-8P GT01-C30R4-8P GT01-C100R4-8P GT01-C200R4-8P GT01-C300R4-8P Connectable PLCs (1m) (3m) (10m) (20m) (30m) •Built-in port in FX1S, FX1N, FX 2N, FX 2NC or FX3U Series PLC or RS-422 type function extension board Prepared by customer *1 GT01-C30R4-25P GT01-C100R4-25P GT01-C200R4-25P GT01-C300R4-25P •Q (Q mode)/QnA CPU serial communication unit 1,200 m maximum •Built-in port in QnA/A Series PLC (3m) (10m) (20m) (30m) •Built-in port in Q CPU Conversion cables (recommended products manufactured by Mitsubishi Electric Engineering Company Limited) : FA-CNV2402CBL(0.2m)/ FA-NV2405CBL(0.5m) Prepared by customer *1 RS-422 Prepared by customer *1 Prepared by customer *1 GT10-C30R4-25P GT10-C100R4-25P GT10-C200R4-25P GT10-C300R4-25P •Inverter *1 S500,A500,F500, V500,A700,F700,E700 •Microcomputer*1 • OMRON*1 CQM1H,CJ1,CP1,C200HS,C200H,C200H α,CS1, C1000H,C2000H,CV500,CV1000,CV2000,CVM1 RS-232 (24 V DC Power supply) GT1050-QBBD GT1055-QSBD NEW NEW 24 VDC Power supply Connection Cables Connectable PLCs •Built-in port in Q CPU •RS-232 type function extension board or special adapter for communication connected to FX1S, FX1N, FX 2N, FX 2NC or FX3U Series PLC 24 VDC Power supply GT1030-LBD2 GT1030-LWD2 GT1030-LBDW2 GT1030-LWDW2 GT1020-LWD2 GT1020-LBD2 GT1020-LBDW2 GT1020-LWDW2 RS-232 Connection Cables GT10-C30R2-6P(3m) Prepared by customer •Q (Q mode)/QnA (S) CPU serial communication unit •RS-232 type function extension board or special adapter for communication connected to FX1S, FX1N, FX 2N, FX 2NC or FX3U Series PLC 15 m maximum Prepared by customer *1 •Q (Q mode)/QnA (S) CPU serial communication unit 15 m maximum Prepared by customer *1 • Barcode reader*1 • OMRON*1 • Matsushita Electric *1 • TOSHIBA MACHINE*1 • Yasukawa Electric*1 • KEYENCE*1 • Allen-Bradley*1 • SIEMENS*1 NEW NEW •Built-in port in Q CPU *1 15 m maximum •Microcomputer*1 NEW NEW Connectable PLCs 15 m maximum Prepared by customer *1 1,200 m maximum Prepared by customer *1 • OMRON*1 RS-232 Prepared by customer •Q (Q mode)/QnA CPU serial communication unit •Built-in port in Q CPU Conversion cables (recommended products manufactured by Mitsubishi Electric Engineering Company Limited) : FA-CNV2402CBL(0.2m)/ FA-NV2405CBL(0.5m) •Microcomputer*1 RS-232 *1 NEW NEW •Built-in port in QnA/A Series PLC (3m) (10m) (20m) (30m) RS-422 GT09-C30R2-9P(3m) GT1020-LWD GT1020-LWDW Prepared by customer *1 RS-232 (24 V DC Power supply) GT01-C30R2-9S(3m) GT1020-LBD GT1020-LBDW •Built-in port in FX1S, FX1N, FX 2N, FX 2NC or FX3U Series PLC or RS-422 type function extension board CQM1H,CJ1,CP1,C200HS,C200H,C200H α,CS1, C1000H,C2000H,CV500,CV1000,CV2000,CVM1 GT01-C30R2-6P(3m) NEW NEW Connectable PLCs (1m) (3m) (10m) (20m) (30m) S500,A500,F500, V500,A700,F700,E700 Prepared by customer *1 GT1030-LWD GT1030-LWDW Connection Cables GT10-C10R4-8P GT10-C30R4-8P GT10-C100R4-8P GT10-C200R4-8P GT10-C300R4-8P Prepared by customer *1 •Inverter *1 GT1030-LBD GT1030-LBDW •Microcomputer*1 • Barcode reader*1 Prepared by customer *1 • OMRON*1 • Matsushita Electric*1 • TOSHIBA MACHINE*1 • Yasukawa Electric*1 • KEYENCE*1 • Allen-Bradley*1 • SIEMENS*1 GT1020-LBL, GT1020-LBLW, GT1020-LWL, GT1020-LWLW (5V DC Power supply by PLC) RS-422 5 V DC Power supply by PLC RS-422 Connection Cables GT10-C10R4-8P(1m) GT10-C30R4-8P(3m) *1: Please refer to the connection manual for details. 18 GT1020-LBL GT1020-LBLW GT1020-LWL GT1020-LWLW NEW NEW Connectable PLCs •Built-in port in FX1S, FX1N, FX 2N, FX 2NC or FX3U Series PLC or RS-422 type function extension board Main unit & Option parts Division Model name Specifications Type Frame color CE EMC LVD RS-422/RS-232/USB ° — — RS-422/RS-232/USB ° — — RS-422/RS-232/USB ° — — RS-422/RS-232/USB ° — — For GT1050/GT1055,GT1040/GT1045 ° — — GT01-C10R4-8P FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [1m] — — — GT01-C30R4-8P FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [3m] — — — GT01-C100R4-8P FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [10m] — — — GT01-C200R4-8P FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [20m] — — — GT01-C300R4-8P FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [30m] — — — GT01-C30R4-25P QnA/ACPU (D-SUB25 pin) direct connection RS-422 cable [3m] — — — GT01-C100R4-25P QnA/ACPU (D-SUB25 pin) direct connection RS-422 cable [10m] — — — GT01-C200R4-25P QnA/ACPU (D-SUB25 pin) direct connection RS-422 cable [20m] — — — GT01-C300R4-25P QnA/ACPU (D-SUB25 pin) direct connection RS-422 cable [30m] — — — GT01-C30R2-6P QCPU (MINI-DIN 6 pin) direct connection RS-232 cable [3m] — — — GT01-C30R2-9S FXCPUcommunication boards(D-SUB 9 pin) connection RS-232 cable [3m] — — — GT01-C30R2-9S PC (D-SUB 9 pin: female)<=>GOT (D-SUB 9 pin: female) connection RS-232 cable [3m] — — — PC (USB-Atype)<=>GOT (USB-MINI-Btype) connection USB cable [3m] — — — GT1050/GT1055 GT1055-QSBD main unit GT1050-QBBD NEW GT1040/GT1045 GT1045-QSBD NEW main unit GT1040-QBBD NEW Memory board GT10-50FMB NEW Power supply UL/cUL PLC connection/PC NEW Display 5.7-inch (256 color) 5.7-inch (16 scales) Black DC24V 4.7-inch (256 color) 4.7-inch (16 scales) -RS-422 for PLC connection (Common with GT11) Connection cable -RS-232 for PLC connection (Common with GT11) Data Transfer cable Division GT09-C30USB-5P Model name Specifications Type Frame color LED Backlight LVD RS-422/RS-232 ° — ° RS-232/RS-232 ° — ° RS-422/RS-232 ° — ° (white/pink/red) RS-232/RS-232 ° — ° 3-colors RS-422/RS-232 ° — — RS-232/RS-232 ° — — RS-422/RS-232 ° — — RS-232/RS-232 ° — — RS-422/RS-232 ° — ° RS-232/RS-232 ° — ° RS-422/RS-232 ° — ° RS-422/RS-232 ° — ° RS-232/RS-232 ° — ° RS-422/RS-232 ° — ° RS-422/RS-232 ° — — RS-232/RS-232 ° — — RS-422/RS-232 ° — — RS-422/RS-232 ° — — RS-232/RS-232 ° — — RS-422/RS-232 ° — — For GT1030,GT1020 (Power supply not needed) — — — GT10-C10R4-8P FXCPU (MINI-DIN 8 pin) direct connectionRS-422 cable [1m] — — — GT10-C30R4-8P FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [3m] — — — GT10-C100R4-8P FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [10m] — — — GT10-C200R4-8P FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [20m] — — — GT10-C300R4-8P FXCPU (MINI-DIN 8 pin) direct connection RS-422 cable [30m] — — — GT10-C30R4-25P QnA/ACPU (D-SUB 25 pin) direct connection RS-422 cable [3m] — — — GT10-C100R4-25P QnA/ACPU (D-SUB 25 pin) direct connection RS-422 cable [10m] — — — GT10-C200R4-25P QnA/ACPU (D-SUB 25 pin) direct connection RS-422 cable [20m] — — — GT10-C300R4-25P QnA/ACPU (D-SUB 25 pin) direct connection RS-422 cable [30m] — — — GT10-C30R2-6P QCPU (MINI-DIN 6 pin) direct connection RS-232 cable [3m] — — — GT01-C30R2-6P PC (D-SUB 9 pin: female)<=>GOT (MINI-DIN 6 pin: female) connection RS-232 cable [3m] — — — — — — — — — 3-colors 4.5-inch Black GT1030-LBDW Monochrome (black/white) GT1030 GT1030-LBDW2 main unit GT1030-LWD NEW GT1030-LWD2 NEW GT1030-LWDW NEW GT1030-LWDW2 NEW 4.5-inch White Power supply UL/cUL EMC GT1030-LBD2 Monochrome (black/white) GT1020-LBD (green/orange/red) 3-colors (green/orange/red) 3-colors GT1020-LBL Black GT1020-LBDW Monochrome (black/white) GT1020-LBDW2 GT1020-LBLW main unit GT1020-LWD NEW GT1020-LWD2 NEW GT1020-LWL NEW GT1020-LWDW NEW GT1020-LWDW2 NEW GT1020-LWLW NEW GT10-LDR DC5V DC24V 3-colors (green/orange/red) 3.7-inch White Monochrome (black/white) DC5V DC24V 3-colors (white/pink/red) GT1020 DC24V DC24V (green/orange/red) 3.7-inch DC24V (white/pink/red) 3-colors GT1020-LBD2 Memory loader CE PLC connection/PC GT1030-LBD Display DC5V DC24V 3-colors (white/pink/red) DC5V -RS-422 for PLC connection Connection cable -RS-232 for PLC connection Data Transfer cable RS-232/USB adapter For GT1020,GT1030 (software:GT Designer2,GX Developer) GT10-RS2TUSB-5S Sold separately USB cable:GT09-C30USB-5P [3m] (Mistubishi Electric System Sarvis CO.LTD) Connection cable for Bar code GT10-CO2H-6PT9P Barcode reader (D-SUB 9 pin: female) GOT (MINI-DIN 6 pin: female) connection RS-232 cable [0.3m] Options Division Model name Specifications -GT1050/GT1055 GT10-50PSGB NEW GT10-50PSCB NEW Antiglare, 5 sheets Clear, 5 sheets GT10-50PSGW NEW Antiglare (frame: white), 5 sheets GT10-50PSCW NEW Clear (frame: white), 5 sheets GT10-40PSGB NEW Antiglare, 5 sheets GT10-40PSCB NEW Clear, 5 sheets GT10-40PSGW NEW Antiglare (frame: white), 5 sheets GT10-40PSCW NEW Clear (frame: white), 5 sheets -GT1040/GT1045 Protective sheet -GT1030 GT10-30PSGB Antiglare, 5 sheets GT10-30PSCB Clear, 5 sheets GT10-30PSGW Antiglare (frame: white), 5 sheets GT10-30PSCW Clear (frame: white), 5 sheets -GT1020 GT10-20PSGB Antiglare, 5 sheets GT10-20PSCB Clear, 5 sheets GT10-20PSGW Antiglare (frame: white), 5 sheets GT10-20PSCW Clear (frame: white), 5 sheets Manuals GT10-U-E Battery GT11-50BAT GT10 User's Manual Battery for backup of clock data,(Apare parts for GT1050,GT1055,GT1030) 19 HEAD OFFICE: TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN Note: The screens shown in this brochure are for presentation purposes only. HIME-L025-A0809(MEE) New publication, effective Sep.2008 Specifications subject to change without notice.