Transcript
Vigori Diary Keep a health diary
Guide
Vigory Diary Health Assistant is a health information detection device. The detected data cannot be used to replace the diagnosis, counsel, or advices provided by doctors and physicians.
Content
English instructions Foreword Product Basics Appearance Operation Conditions Notices Bluetooth connectionsettings Interface Safety Instructions
01 02 03 04 05 06 08 16
Product Basics
Foreword
Thank you for Choosing Vigori Diary! This manual contains comprehensive information about our product, precautions and many more. Please read it carefully before using. We hope you enjoy our product.
Best Regards,
ESER
1
Vigori Diary is useful for obtaining many body health data at one time, helps to keep a health diary. It is non-invasive tool, using finger sensor to collect body data. You can use it several times a day to keep track of your health. Through countless laboratory-based experiments and combination of integrated sensor technology, Vigori Diary not only records your health data but also arises your health awareness.
Power Management 1)Press power button to switch on Vigori Diary. 2)Device will automatically shut down in 3 minutes without using. After a successful test, it will automatically shut down in 10 seconds. 3)Testing is not allowed during charging. 4)Press and hold power button for 3 seconds to switch off the device. If a failure test is happened, please switch off the device and reopen it for test.
2
Operation Conditions
Appearance
A B
C
D E
A. Power LED : When Vigori Diary is switched on, LED will lit in blue.
1)Temperature range: 20 - 27 degrees 2)Humidity range: 20% - 70% 3)Atmospheric Pressure Range: 700-1060hPa 4)Avoid direct contact with sunlight 5)Avoid contact with toxic or flammable gas
B. Ventilation area : The system can be cooled here.
6)Working Rated Voltage: 5V 7)Working Rated Current: 1A
C. Power Button : When pressed, Vigori Diary is switched on.
D. Micro USB port : Device can be charged here.
E . Bluetooth LED signal : When connected to a smart device, LED will lit in blue.
3
4
Notices
Bluetooth connection settings
*Please be aware of the following, or test result will be affected* 1)Use device only on a flat surface. 2)Keep nail up during testing process. 3)Suitable finger temperature: 29 - 35 degrees 4)It is suggested having interval of 10 minutes, for heat to be fully dissipated from the sensor. 5)Do not apply Isolation products such as nail polish and sunblock before testing. 6)Allow cooling down after sports for at least 1 hour. 7)Allow cooling down after bathing or washing for at least 30 minutes. 8)Test after consuming alcohol is not ‘ allowed. 9)Please insert finger into finger sensor to the end, relax, DON’T press down in the sensor.
1. Make sure your smart phone’s Bluetooth is switched on. 2. Open Vigori Diary app and log in, on the upper right hand corner of the app, there is a Bluetooth button. Once pressed, a dropdown list menu appears 3. Select Bluetooth.
5
6
Interface
Bluetooth connection settings
4. If the device’s Bluetooth is switched on, it should be able to detect device name started with ITON or SPPLE. Press it to connect and confirm connect. 5. You should be able to run a test once Bluetooth pairing procedure is completed.
Registration Enter given account and password to log in. First time user will be required to fill out following info: 1) Name 2) Password 3) Phone 4) Gender 5) Birthday 6) Height 7) Weight 8) Diabetic or Normal 9) Latest HbA1C tested from hospital
7
8
Interface
Interface
Test Page
Environment Check
Choose meal condition and
Follow an environment
medication for test. Press
checking page
start measurement.
Bluetooth Connecting
Insert Finger
You’ll see Bluetooth is
This page will tell you rest
connecting.
device power. If power is lower than 30%, it is not allowed for test so please charge it before test. Insert finger for sensing Insert to the end of sensor and don’t press down
9
10
Interface
Interface
Testing After inserting finger, test starts as you see this processing page showing it is under test. It takes about 1 minute to show test result. During testing, please relax and keep same posture
Result page
Main Menu
It shows you multiple health
Click on person icon to enter and edit account
data of hemoglobin, oxygen
information. Press Detecting to enter test page.
saturation, blood flow
In Health Status, you could check test data analysis .
velocity, pulse, glucose,
As you see all the data about total test times,
ambient and shell
average value, how many times are in higher range,
temperature and humidity
how many times are in lower range, how many data in good range, also in percentage pie chart and trend graph to show you overall health status.
11
12
Interface
Interface
Measurement Record This page shows you each test data with glucose. Click once on the record, its test result page will show up for reference.
Measurement Setting
In addition to normal range, you could modify notice standard rage according to your own condition. After modification, APP will show you abnormal data in red color per your setting.
User Guide Health Remind You can organize your own
Here is some notice you
measurement reminder or
shall know about before
medication reminder in this
using this device. Follow
setting page.
the notice to secure best effect and outcome..
13
14
Interface
Safety Instructions
Health Reference This page contains some health index reference data for you to better understanding what is the result mean and what to take care of.
15
Safety Instructions 1)Protect device from water. Once spattered, cut off the power supply and switch off. 2)Keep device clean. Use soft damp cloth to clean. Do NOT use steam to sterilize. Protect non-waterproof finger clip sensor from liquids. 3)Do NOT sterilize under high temperature or disinfect with electron beam or radiation. 4)Do NOT store device near metal objects to avoid accidental short circuiting of inbuilt battery. 5)Do not use device immediately after bringing it from a cold place to a warmer or more humid place. Wait for 30 minutes for device to get used to new environment. 6)Keep device from vibrating, corrosive, and flammable materials. Protect from extreme temperature and humidity. 7)Device must be maintained by authorized and qualified engineers. Do NOT disassemble. 8)Do not throw, hit, or scratch surface of device. 9)Do NOT block device’s ventilation to ensure effective heat dissipation. 10)Before testing, ensure device is working properly, in a suitable environment. 11)Do NOT use in a place with flammable gas, such as oxygen-mixed anesthetic. 12)Do NOT take out inbuilt battery. Do NOT throw inbuilt battery into the fire. It may explode.
16
