Gw21w-m 1-port Wireless Lan To Serial Server

Transcript

For More Information: Web: www.neteon.net Email: [email protected] Toll Free: 1-888-908-3330 GW21W-M 1-Port Wireless LAN to Serial Server Key Features: • Support RS-232, RS-422 and RS-485, External DIP Switch Selectable • Wireless LAN Support Industry Standard IEEE 802.11b and Following Network Topologies: o Infrastructure for Connecting to Wireless Access Point o Ad-Hoc for Pair Connection Mode Between Two GW21W-M Units • Include VirtualCOM Driver Support All Windows OS • Also Support TCP Server, TCP Client, UDP and Pair Connection Modes for Direct TCP/IP Connections with Host Software Application • Enhanced Security Features Support 64-bit and 128-bit WEP Encryption, IP Filtering & User Password Protection • Multiple Configuration Options Using Web Browser, Telnet, Serial Console and Auto-detect Windows Configuration Utility • Support DIN Rail Mounting • Build-in Hardware Watchdog Timer for hardware self reboot when system failures occur 1/3 For More Information: Web: www.neteon.net Email: [email protected] Toll Free: 1-888-908-3330 • Easily Upgrade System Firmware via Wireless Network Specifications: Hardware: • • • • • Hardware Reset button return system back to default IP and wireless network settings Hardware Watchdog Timer Onboard Buzzer Real Time Clock Internal Buffer Size: ƒ ƒ ƒ ƒ TCP Receive buffer size: 8KB TCP Transmit buffer size: 16KB Serial Receive buffer size: 4KB Serial Transmit buffer size: 4KB Wireless Network: • • • • • • • IEEE 802.11b, 11M bps, Wi-Fi certified Wireless LAN Support both 64-bit and 128-bit WEP encryption protocols Network Topology Support: ƒ ƒ RF Output Power: 20mW, 13dBm Default antenna: SMA reverse connector, 2dBi Optional 5.5dBi and 11dBi high gain antenna Wireless distance coverage using Ad-Hoc Mode between 2 GW21W-M units: ƒ ƒ ƒ • Infrastructure Mode for connecting to an Access Point Ad-Hoc Mode for pair connection between 2 GW21W-M units Use default 2dBi antenna on both ends: 210 m Use optional 5.5 dBi high gain antenna on both ends: 1 km Use optional 11 dBi high gain antenna on both ends: 1.5 km Wireless distance coverage using Infrastructure Mode (Test done using Cisco Aironet AP350 Access Point with Tx Power: 20dBm): ƒ ƒ ƒ Use default 2dBi antenna on GW21W-M: 1 km Use optional 5.5 dBi high gain antenna on GW21W-M: 1.35 km Use optional 11 dBi high gain antenna on GW21W-M: 1.5 km Serial Port: • • • • • • • • • Speed: 1,200 bps to 230,400 bps External DIP switch for selecting RS-232, RS-485, RS-422 or Serial Console mode Connector: Terminal block and Mini DIN connector (to DB9 Male connector cable Included) Signal: ƒ ƒ ƒ ƒ RS-232 Mini DIN Jack: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-232 Terminal block: TxD, RxD, RTS, CTS, GND RS-485 2-Wire: Data+, Data-, GND RS-485 4-Wire: TxD+, TxD-, RxD+, RxD-, GND Packet Delimiter: Support Inter-character Timeout and Character Delimiter Parity: None, Even, Odd, Mark, Space Flow Control: None, Hardware CTS/RTS, Software Xon/Xoff Data Bits: 7 or 8 Stop Bits: 1 or 2 Operation Mode: • • Direct TCP Connections: ƒ ƒ ƒ ƒ TCP Server Mode with IP Filtering function TCP Client Mode UDP Mode Pair Connection Mode VirtualCOM support all Windows OS 2/3 For More Information: Web: www.neteon.net Email: [email protected] Toll Free: 1-888-908-3330 Configuration: • • Include Windows Setup Utility with broadcast search function to auto detect GW21W-M on the wireless network and to set IP address Support full system configuration via ƒ ƒ ƒ Standard web browser Telnet Serial console Programming: • For special application requirements, a SDK (Software Development Kit) for C language is available upon request for customize firmware development on GW21W-M Environment: • • • • • • • • • • Dimension (L x W x H) : 90 x 45 x 63 mm (3.5 x 1.7 x 2.5 in) Power Input Requirement: 9 to 30VDC Power Consumption: 220mA @ 12VDC Connector: 3 pin terminal block (V+, V-, Frame Ground) LED Indicators: Run, LAN, COM Operation temperature: 0o to 60o C Storage temperature: -40o to 70o C Humidity: 20% to 90% non-condensing Surge Protection for ESD ƒ ƒ ƒ 15KV for RS232 12KV for RS485 10KV for Power Agency Approval ƒ ƒ CE FCC, Class B Ordering Information • GW21W-M 1-Port Wireless LAN to Serial Server Accessories • • • • AC24VT HG055 HG110 6MCABLE Universal AC (100 to 240V) to 24VDC power supply w. Terminal Block 5.5 dBi high gain antenna w. 1.8M cable, omni directional, length 4.5” 11 dBi high gain antenna w. 60cm cable, omni directional, length 48” 6M extension cable for use with HG110 high gain antenna 3/3