Transcript
Distributed by:
www.Jameco.com ✦ 1-800-831-4242 The content and copyrights of the attached material are the property of its owner.
Jameco Part Number 1944716
User’s Manual
USB 2.0 Multi-Plus Card Reader/Writer
Table of Contents
Safety Instructions…………………………………………..……………….……….…..……1 Introduction…………………………………………………...……………….……..……….…1 Features………………………………………………………..……………….…….……..…...1 System Requirements……………………………………..……………….………..……..….2 Package Contents…………………………………………..……………….……..………..…2 Specification……..…………………………………………..………………….…..………..…2 Driver Installation….....………………..…………………………..…………….……..………3 AP Software Installation………………………………………………………….…………….5 Installation Verification..……………………………..….………………………….………....8 Certificate...……………………………………………..….………………………….………..13 Disclaimer...…………………..…………..………………..…………………………….……..13
Safety Instructions Always read the safety instructions carefully Keep this User’s Manual for future reference Keep this equipment away from humidity Lay this equipment on a reliable flat surface before setting it up If any of the following situation arises, get the equipment checked by a service technician: The equipment has been exposed to moisture. The equipment has been dropped and damaged. The equipment has obvious sign of breakage. The equipment has not working well or you cannot get it work according to User’s Manual.
Introduction The USB 2.0 card reader/writer is a very handy product because it reads data from and writes data to CompactFlashTM Type I/II, IBM MicrodriveTM, SmartMediaTM (SM), Memory Stick ® (MS), Memory Stick PRO® (MS PRO), Memory Stick Duo ®(Adapter needed), Memory Stick Pro Duo ®(Adapter needed), SecureDigitalTM (SD), Mini SD (Adapter needed), MultiMediaCardTM (MMC), RSMMC (Adapter needed), and XD**. No drivers needed for Windows ME/2000 SP4/XP. Because of its pocket size, it can be carried and used easily. Nowadays, Flash Memory has various formats and sizes. Our USB 2.0 Multi-Plus card reader/writer allows you to read, write and erase data from six most popular cards at the same card reader. **Not all types of Card Reader/Writers support XD picture card. Please check the package or the vender for the XD card support.
Features ■ ■
Transfer rate of Hi-Speed USB2.0 interface can be up to 480 Mb/sec (Max). 2/4 slots support CompactFlashTM Type I/II, IBM MicrodriveTM, SmartMediaTM (SM), Memory Stick ® (MS), Memory Stick PRO® (MS PRO), Memory Stick Duo ®(Adapter needed), Memory Stick Pro Duo ®(Adapter needed), SecureDigitalTM (SD), Mini SD (Adapter needed), MultiMediaCardTM (MMC), RSMMC (Adapter needed), and XD**, and allow data exchange in different slots.
■ ■
Supports Hot-Swapping and Plug and Play function. No additional device driver needed under Windows ME/2000 SP4/XP and Mac. 9.X/10.X 1
System Requirements ■ ■ ■ ■
IBM Compatible Pentium-233 MHz or faster & MAC PCs. 64 MB RAM or more. PC or MAC with available USB 2.0 port. OS support: Win98SE/Win ME /Win 2000/Win XP and Mac 9.X up.
Package Contents ■ ■ ■ ■
USB 2.0 Multi-Plus Card Reader/Writer x 1 Driver CD x 1 Quick Installation Guide x 1 USB 2.0 Cable (Option)
Specification Model No. Function
USB 2.0 Multi-Plus Card Reader/Writer Supports CompactFlashTM Type I/II, IBM MicrodriveTM, SmartMediaTM (SM), Memory Stick ® (MS), Memory Stick PRO® (MS PRO), Memory Stick Duo ® (Adapter needed), Memory Stick Pro Duo ®(Adapter needed), SecureDigitalTM (SD), Mini SD (Adapter needed), MultiMediaCardTM (MMC), RSMMC (Adapter needed), and XD**
Standards
Compliant Hi-Speed USB 2.0
**Not all types of Card Reader/Writers support XD picture card. Please check the package or the vender for the XD card support.
Supported O.S.: Functions OS
Driver
AP software
Win 98se
Vendor Supply
Vendor Supply
Win ME
System Supply
Vendor Supply
Win 2000
System Supply*
Vendor Supply
Win XP
System Supply
Vendor Supply
Mac 9.x
System Supply
---
Mac 10.x
System Supply
---
*：When your system is Win2000 ~SP3, system will find card reader with installing AP software.
2
Driver Installation ■ Windows 98SE 1. Connect the USB 2.0 Multi-Plus card reader/writer to PC and insert the driver CD to your CD-ROM drive. 2. The system shows This wizard searches for new driver, click Next to continue.
3. Select Search for the best drivers for your device , and click Next to continue.
3
4. Select Specify a location, click Browse to select the driver location indicated below for Windows 98 in CD, and click Next to continue.
5. The system shows Windows driver file search for the device, click Next to continue.
6. The system shows Windows has finished installing the software, click Finish to finish the installation.
4
AP Software Installation If the four icons of the ‘Removable Disk’ are not specified, you need to install the software from the driver CD for setting up the AP software. The AP software is not supported Mac..
Windows Systems 98SE After you finish the driver, you don’t need to install AP software again.
Windows ME/2000/XP 1. Please select into ‘Windows of Driver’ folder in your CD, and Click ‘Setup’ to start the installation. 2. Select your language and click ‘OK’.
5
3. Click ‘Next’ to install the system.
4. Click ‘Finish’ to complete the installation.
6
5. Select ‘Yes’ click ‘OK’ to restart your computer.
6. Please check ‘My Computer’ to confirm the icons of CF, SM, SD, MS of the AP system.
Mac 9.x and 10.x AP software doesn’t support Mac OS.
7
Installation Verification ■ Windows 98SE
8
■ Windows ME
9
■ Windows 2000
10
■ Windows XP
11
■ Mac 9.x Please click Apple image the menu bar and select Apple Device then click Devices and Volumes. USB 2.0 Card Reader is displayed. ■ Mac 10.x Please click Apple System Profiler and select Devices and Volumes then click USB to verify the installation completed.
12
Certificate ■ FCC This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received. Including interference that may cause undesired operation. ■ CE – Certificate This equipment is in compliance with the requirements of the following regulations: EN 55 022: CLASS B
DISCLAIMER Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any commercial damage, including but not limited to special, incidental, consequential, or other damage. No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying, recording or information recording and retrieval systems without the express written permission of the manufacturer.
13
