H21 Product Specifications

Transcript

Model Name: H21 Revision: A Date: 18/08/2008 H21 Product Specifications CHANGE HISTORY Rev. A Date Author Reason for change 2008/08/18 Vinci Chen First Draft Contribution from Qisda Page 1 Model Name: H21 Revision: A Date: 18/08/2008 1. INTRODUCTION 1.1 SCOPE The scope of this document is to describe the specifications of the H21. This document also includes the list of AT commands implemented at the interface of the HSPA modem. Page 2 Model Name: H21 Revision: A Date: 18/08/2008 2. REFERENCES Page 3 Model Name: H21 Revision: A Date: 18/08/2008 3. GLOSSARY Certification Appliance by getting specific certificate Conformity Appliance to standards Connection Manager PC Application dealing with the H21 ROHS Restriction of the use of certain Hazardous Substances in electrical and electronic equipment H21 Qisda Internal project name of this HSPA USB dongle Page 4 Model Name: H21 Revision: A Date: 18/08/2008 4. GENERAL PRODUCT DESCRIPTION 4.1 INTRODUCTION H21 is a fully equipped multifunctional device for wireless internet access and personal scalable memory. H21 Owners will enjoy top speeds up to 7.2 Mbps downlink and 2.0 Mbps uplink (S/W upgradeable to 5.76 Mbps) and will have the freedom to roam globally on tri-band HSPA networks (850, 1900 and 2100 MHz bands). In areas where HSPA is not available, H21 is backwards compatible to UMTS, EDGE and GSM/GPRS network (850, 900, 1800 and 1900 MHz). Diversity reception in the UMTS bands and two external antennas help to enhance the internet experience. Remarkably, it features a micro SD interface which opens additional possibilities for storing and securing personal data. Furthermore, H21 offers automatic software installation experience for both Microsoft Windows XP and Vista (Only) users (Mac OS has to be manually setup). H21 USB modem combines innovative wireless technology with style and highly attractive design. It is ideal for home office or notebook computer use. Page 5 Model Name: H21 Revision: A Date: 18/08/2008 Features
Stylish ID Design
Familiar USB Connection
Micro SD Memory Expansion Slot
Multimode HSPA / UMTS / GPRS / EDGE / GSM
HSUPA up to 2 Mbps upload (Upgradeable to 5.76 Mbps)
HSDPA up to 7.2 Mbps download
Automatic Software Installation Page 6 Model Name: H21 Revision: A Date: 18/08/2008 Specifications DL/UL Capability:

DL: HSDPA Category 8, 7.2Mbps UL: HSUPA Category 5, 2.0Mbps, , upgradeable to Category 6, 5.76Mbps EDGE/GPRS MS Class 12 UMTS Diversity Support receive equalizer with antenna diversity on UMTS 850/1900/2100MHz bands Mass Storage MicroSD Expandable Memory Slot Bands WCDMA 850/1900/2100, Power Class 3 GSM/GPRS/EDGE 850/900,
GSM power class 4, EDGE E2 GSM/GPRS/EDGE 1800/1900, GSM power class 1, EDGE E2 OS Support Environmental
Certification



Windows XP x86+x64, Vista x86+x64, Mac OS X Operating Temperature: -20 to +55 degree C Storage Temperature: -40 to +85 degree C CE NCC SAR GCF Microsoft WHQL RoHS Target weight (g) <40g Dimensions (mm) 92.7 x 29.8 x 11.8 Page 7 Model Name: H21 Revision: A Date: 18/08/2008 System Requirements
Compatible with all modem desktop and laptop PCs
Windows XP x86/x64, Windows Vista x86/x64 and Mac OS X
SIM Card from your local Suppliers
MicroSD card (Optional) 4.2 PRODUCT CERTIFICATIONS • CE • FCC • PTCRB • GCF 4.3 CONTENT OF THE DELIVERY The package contains the following elements: • Modem device including Embedded PC software (USB drivers, Firmware). PC tool is under discussion. • Bubble bag. 4.4 PACKAGING TBD. Qisda proposes to provide industrial package, only device (no USB cable, manual and others). Device in the bubble bag and put in the carton. Page 8 Model Name: H21 Revision: A Date: 18/08/2008 Page 9 Model Name: H21 Revision: A Date: 18/08/2008 5. DETAILED REQUIREMENTS 5.1 HARDWARE CHARACTERISTICS AND REQUIREMENTS 5.1.1 Mechanical Outline 5.1.1.1 Dimensions • Overall dimensions of the modem will be approximately 92,7 x 29,8 x 11,8mm. 5.1.1.2 Weight • Weight of the Modem is <40g. 5.1.1.3 Upper Cover • Branding name • String “Mobile Broadband HSUPA USB Modem” 5.1.1.4 Spec label content A label will be pasted on the modem. The following information will be necessary: 1. "Motorola" 2. 3. 4. 5. Bar code 6. 7. "Made In CHINA” Page 10 Model Name: H21 Revision: A Date: 18/08/2008 5.1.1.5 Warranty Seal A warranty seal is pasted on the screw hole in the product to protect against modem disassembly by final user. 5.1.2 User Hardware interfaces The Modem is not equipped with any screen, keypad, or speaker. 5.1.2.1 USB Interface 5.1.2.1.1 Connector One type A USB plug compatible with standard PC USB connector. 5.1.2.1.2 USB interface qualification The USB interface has to support the USB 2.0 high speed data access. 5.1.2.2 Recommended USB Cable (Motorola Inc. responsibility) Main characteristics of the cable are: • Length (50cm recommended) • USB shielded High speed cable 2.0 • Complies with fully rated cable specifications reducing electromagnetic/radio frequency interference (EMI/RFI) 5.1.2.3 LED The modem is equipped with 1 LED providing modem status information to the final user. Three colours are defined: • When plugged, the colour is Red • When attached to 2G network, the colour is Green, • When attached to 3G network, the colour is Blue. Page 11 Model Name: H21 Revision: A Date: 18/08/2008 • The colour (Green or Blue) is blinking when data transfer from network. 5.1.2.4 Internal SIM Card Reader The Modem is equipped with an internal Micro-SIM Card Reader. SIM type accepted: 1,8V/3V micro-SIM Cards. • 5.1.2.5 Internal Micro-SD Card Reader The Modem is equipped with an internal Micro-SD Card Reader. max usable size for micro-SD expandable memory: support 16 GB • 5.1.2.6 Internal user memory Minimum usable internal flash memory will depend on the size of connection • manager. Total memory size is 85MB. 5.1.3 Power supply 5.1.3.1 Power supply Modem is powered via the USB plug (5V nominal value) • 5.1.3.2 Power consumption USB max theoretical value : 500 mA • At maximum speed, the current limitation should not make any service breakdown. (As the experience, the laptop has supplied more than 650mA current in the industry standard, and the maximum power consumed of H21 does not exceed 600mA) 5.1.4 Radio characteristics 5.1.4.1 Usable frequency bands • WCDMA 850/1900/2100 MHz power class 3 • GSM/GPRS/EDGE 850/900 MHz power class 4 • GSM/GPRS/EDGE 1800/1900 MHz power class 1 Page 12 Model Name: H21 Revision: A Date: 18/08/2008 5.1.4.2 SAR 5.1.4.2.1 Target SAR is fully compliant with FCC standard. SAR Max 1g < 1,6 W/Kg. 5.1.4.2.2 Measurement Protocol: The measurement method follow the IEC 62209-2 defined. One unit is tested for a body SAR (1g) measurement at a separation distance of 20 mm from the phantom. The measure has to be performed in all bands (GSM850, GSM900, DCS, PCS, UMTS900, UMTS2100 and 3 channels per band). 5.1.4.3 Radiated Performances: TRP/TIS 5.1.4.3.1 Targets performance CONFIGURATION TRP / TIS Targets (dBm, Free space) TRP (typical) TIS (typical) (Low, Mid, High) (Low, Mid, High) GSM 850 28 -102 GSM 900 28 -100 DCS 1800 26 -104 PCS 1900 26 -104 UMTS 850 18 -103 UMTS 1900 20 -106 UMTS 2100 20 -106 5.1.4.3.2 Measurement protocol: The test will be performed with IBM notebook (model: X61). USB modem is plugged directly (without USB cable) in the middle of left side of the notebook. The testing environment is shown as the picture below. Page 13 Model Name: H21 Revision: A Date: 18/08/2008 The test procedure will be based on the CTIA test protocol: 3D or 2*2D (theta=0° and 90°) measurements of TRP and TIS in free space are performed in 3 channels (low, middle, high) in each band. 5.1.5 Environmental constraints 5.1.5.1 Operating Temperature Operation Temperature Range: • -20/+55 °C The type approval of the modem will be done at temperature range of –20 to +55°C. The device will be functional between –20° and +55°C with worse radio characteristics. The tests conditions to be done • Only tested with the USB cable (NB working at room temperature – 25°C ) 5.1.5.2 Storage Temperature • Storage temperature: -40 / +85°C 5.1.5.3 Vibrations The device should be conform to following standards Page 14 Model Name: H21 Revision: A Date: 18/08/2008 • IEC 68-2-36 for vibrations 5.1.5.4 EMC In order to reproduce real life situations, all tests are done with shielded and grounded cables. 5.1.5.5 IP20 The device is IP20 compliance. 5.1.5.6 RoHS Specifications The attachment is how we control our component vendors.
                5.1.6 Interfaces 5.1.6.1 Introduction The HSPA Modem provides the following interfaces: • RF Antennas interface • LED interface • USB interface 5.1.6.2 RF Antennas interface The HSPA Modem is equipped with two antennas. • main antenna dedicated to Tx/Rx all supported frequency bands • auxiliary antenna dedicated to WCDMA Rx diversity 5.1.6.3 Antenna release key The device implement a pushbutton used for release the “Dual Antennas”. 5.1.6.4 LED Interface • 3 colours : red, green, blue • 3 modes : On, Off, and Blinking Page 15 Model Name: H21 Revision: A Date: 18/08/2008 5.1.6.5 USB INTERFACE • USB 2.0 high speed supported 5.1.6.6 SIM Interface • SIM type supported : 1,8V/3V SIM cards 5.1.6.7 Micro SD card Interface SD Card will be compliant with the Multimedia Card standard specification/ Multimedia Card System Specification. Page 16 Model Name: H21 Revision: A Date: 18/08/2008 5.2 SOFTWARE CHARACTERISTICS AND REQUIREMENTS 5.2.1 Basic User Features The modem would give the user the ability to use the following bearer services: - Internet surfing - Sending/Retrieving SMS - Creating/Modifying/Deleting SIM Phonebook contacts - Getting statistical information 5.2.1.1 Internet surfing This feature allow user to establish a connection to Internet. Connection type is either 3G HSPA, 3G, EDGE or GPRS type. Best available network is chosen by default but user will have possibility to choose a connection type when requested. In case there is no 3G HSPA, fallback is done on 3G. In case there is no 3G+/3G available, fallback is be done on EDGE, and if no EDGE, on GPRS. The PC Connection Manager is able to get the SIM characteristics (IMSI, etc.) in order to configure in advance the connection according to the current operator’s settings (APN etc…). PC Connection Manager shall then be able to request the device to connect to Internet with given settings. During the connection: • Any SMS received by the key is stored and a notification is displayed to the user. PC Connection Manager will be notified if requested with unsolicited message on the Modem port. • User could be able to send SMS as he does when no connection is established in Windows based platform. Page 17 Model Name: H21 Revision: A Date: 18/08/2008 • Users can neither using phonebook nor sending SMS when connection is established in MAC OS platform as phonebook and SMS are not supported in Mac OS. Connection is finished in either case: • user disconnects the key from PC • PC software sends disconnection commands to the key. 5.2.1.2 Sending/Retrieving SMS (Mac OS not Support) H21 allows user to do the following SMS actions: - Send SMS to one or many users. SMS encodings supported shall be 7-bit, 8-bit and UCS2. The SMS could be sent after storage. In this procedure, PC first only stores the SMS, and at any later time, sends a stored SMS. Sent SMS shall be either not stored on the key, or stored automatically; depending on user’s choice (configuration choice shall be performed through the PC Connection Manager). - Retrieve SMS. PC is able to read SMS from H21 (received SMS is stored in SIM). After reading, a SMS is become “read” (change status). - Delete SMS. PC Connection Manager is able to delete any SMS from either SIM or device’s memory. - Store SMS. PC Connection Manager is able to store a SMS to SIM or device’s memory. - SMS status report (for example SMS acknowledgment): those SMS shall be supported and PC shall be able to retrieve them / delete them. - All SMS options shall be supported: class of message, multi-part messages; EMS and MMS are not required. Page 18 Model Name: H21 Revision: A Date: 18/08/2008 5.2.1.3 Creating/Modifying/Deleting SIM Phonebook (Mac OS not Support) PC has a dedicated command in order to retrieve the device’s capabilities: fields supported. length of each field. Creating a contact is possible from PC, and then storing the contact to the SIM. In case of SIM storage, only the SIM available sub-fields are supported (for example name and phone number, depending on SIM). PC application is able to organize the contacts in a dedicated order / position in the SIM. 5.2.1.4 Getting statistical information such as size of packet transferred H21 would store input / output bytes of DATA exchanged with network and let PC Connection Manager retrieve and reset those values at any time (connection counter). A global counter on the H21 could accumulate the bytes and would be reset only on PC’s request. The information needed are: • 1) For each connection (identified by starting/ending time), the packets size transferred in each Downlink and Uplink direction • 2) The total size of packet transferred for all connections in Downlink and Uplink direction. 5.2.2 Performances H21 is able to reach following target regarding data transfer rate • HSDPA Category 8 (7.2 Mbps) • HSUPA Category 5 for first release and Category 6 (5.76 Mbps) for later (end of 2008) • SIM access speed as specified in GSM Specification. • Micro SD Card access speed 30 Mb/s. • Simultaneous file data transfer over the network from network to SD CARD (Downlink) and the contrary from SD Card to network (Uplink) must not degrade in any case data transfer rate. Page 19 Model Name: H21 Revision: A Date: 18/08/2008 • Modem Booting time until network connected stage (less than 10s) 5.2.3 USB Driver Requirement 5.2.3.1 PC Operating System compliance The modem shall have working compatibility when plugged to a PC of following operating systems: • Windows XP x32, x64: Firmware update, auto run, and drivers. • Windows Vista x32, x64: Firmware update, auto run, and drivers. • MAC OS X 10.4.x, 10.5.x: CDC/ACM standard compliance only. No tools for firmware upgrade and auto run. The network connection would be achieved manually. 5.2.3.2 USB Bus Speed The USB shall support USB 2.0 High Speed. 5.2.3.3 USB Driver Customization facility Information strings related to the USB driver displayed to the user at driver execution time should be easily customized by SAGEM on the Customer/Operator request basis. This is related to such strings as • Product Digit Code, • USB Vendor ID • USB Standard mode Product ID • USB MSC Product ID • Windows supported list • Company Name • File Description • Internal Name Page 20 Model Name: H21 Revision: A Date: 18/08/2008 Legal Copyright information • 5.2.3.4 USB Driver certification The USB drivers have the Microsoft WHQL certification for the all the specified windows operating systems. 5.2.4 Auto run feature 5.2.4.1 General Description The following requirements are only applied to the Auto run Feature in Windows XP/Vista environment. It is not supported in MAC OS platform. 1. At each plug, USB Key enumerates only as a “CDROM Drive mode”, 2. Windows auto-runs by launching automatically the virtual CD that is shown by the key 3. Auto run program installs the right drivers and Connection Manager available in the CDROM and then after completion switches the key to “Standard mode” composite and launch automatically the Connection Manager. 4. At each next plug, 5.2.4.2 • Key is in “CDROM Drive mode” but drivers and software are already installed. • Key is switched directly to “Standard mode” composite. • PC Connection Manager is automatically launched. “CDROM Drive mode” When the modem is plugged, the device is originally enumerated as “CDROM Drive”, other USB interface are off (not enumerated). This is the default mode. Page 21 Model Name: H21 Revision: A Date: 18/08/2008 5.2.4.3 “Standard mode” This is the mode where the driver are already installed and the device ready to be used. In this mode, the USB is enumerated as a composite device with Modem, Ethernet, Mass storage, Page 22 Model Name: H21 Revision: A Date: 18/08/2008 5.2.4.4 Switch from “CDROM Drive mode” to “Standard mode” The PC Auto run program will issue a SCSI (Small Computer System Interface) switch command to the device so that the key will switch to “Standard mode”. Page 23 Model Name: H21 Revision: A Date: 18/08/2008 5.2.4.5 Device behavior after Install If the device was already previously installed, the device should be automatically turned to the “standard mode” as rapidly as possible. 5.2.5 PC Connection Manager Launching 5.2.5.1 Automatic Launch The connection manager is automatically launched after the Auto run is completed. If Auto run is not available because of particular operating system, then user will launch it himself. 5.2.6 Memory Storage 5.2.6.1 CDROM Drive Content TBD. 5.2.6.2 Device Memory Storage When in “Standard Mode”, the users have the ability to store his own information into the device. The total memory size is 85 MB, and the maximum required for user size is 64 MB. This user space area will be seen a new drive in the PC available for user storage for storing, retrieving or modifying information. 5.2.7 SD card storage SD card is seen as another drive available for the user. SD card will be seen as a new drive in the PC for user storage for storing, retrieving or modifying information. It should be possible for the user for moving information from SD card to Device Memory Storage in both directions and simultaneously. 5.2.8 Concurrency Use Case The following section deals with the concurrency aspects regarding the possibility to execute some use cases simultaneously. The following use cases are taken into account Page 24 Model Name: H21 Revision: A Date: 18/08/2008 • Access/Data Transfer from Device Mass Storage • Access/Data Transfer from SD card • Internet Surfing (Data transfer from network) • Sending/Retrieving SMS • Creating/Modifying SIM Contacts Device Mass Storage Access/Transfer SD card access/Transfer Internet (Data Transfer) SD card Access/Transfersho Device Mass Storage Access/Transfer X uld be possible when Device Mass Storage transfer on Surfing Internet surfing should be possible when Device Mass Storage transfer on going (2) going (1) Internet surfing SD card access/Transfer (1) X should be possible when SD card transfer on going (5) Internet Surfing (Data Transfer) Sending/Retrieving sms Creating/Modifying Contacts (2) (5) X Sending/Retrieving Creating/Modifying sms Contacts Sending/Receiving Creating/Modifying sms should be Contacts should be possible when possible when Device Mass Device Mass Storage Transfer on Storage Transfer on going (3) going (4) Sending/Receiving Creating/Modifying sms should be Contacts should be possible when SD possible when SD card Transfer on card Transfer on going (6) going (7) Sending/Receiving Creating/Modifying sms should be Contacts should be possible when possible when Internet surfing on Internet Surfing on going (8) going (9) (3) (6) (8) X Possible (4) (7) (9) Possible X Page 25 Model Name: H21 Revision: A Date: 18/08/2008 Page 26 Model Name: H21 Revision: A Date: 18/08/2008 5.2.9 SECURITY 5.2.9.1 IMEI Management IMEI set attribution and managed between Motorola and QISDA Writable IMEI feature is not requested 5.2.9.2 Operator SIM Lock. TBD. 5.2.9.3 Retrofit / Firmware update (Mac OS NOT support) H21 provides a strong mechanism to authenticate firmware issuer before applying a firmware update or modification requested from outside the device. Tools and process to be provided in order to retrofit device software update both for user personal need and factory production purpose. For factory, special care is to be taken for efficiency in order to gain in productivity. When download is ongoing, the device is protected against any incident as PC power failure or Downloading Tool process aborting or USB loosing connection for any reason (Device unplugged). The user should be able to use his modem device to download the software/firmware image update from the website. 5.2.9.4 Debug and Trace capabilities limited in production devices All debug/Trace features and capabilities are disabled by default on production device. It could not be possible to use debug / trace capabilities to bypass simlock protection or firmware update protection. On a live device, Debug/Trace activation is limited to a particular imei or limited to this device by any other mean. Page 27 Model Name: H21 Revision: A Date: 18/08/2008 5.2.10 Diagnostic and Debugging 5.2.10.1 Introduction Tools and process to be provided in order to be able to debug easily the device and provide if needed trace and logs . 5.2.10.2 Diagnostic via the PC tools To get traces and logs easily by any engineer in order to provide debugging information. 5.2.10.3 Other diagnostic Simply sending AT tests the serial interface of the HSPA Modem. If the HSPA Modem responds OK, the interface is basically in full working order. 5.2.11 AT Command interface The description of each command is given in the document “AT commands supported by HSUPA modem”. Page 28