Transcript
H4X4-232-4K HDMI 4 In 4 Out 4K Matrix with RS232 Control H4X4-232-4K is a High Performance HDMI Matrix with four HDMI inputs and 4 HDMI outputs. It allows HDMI sources like Blu-Ray player, Satellite, Cable Boxes, Gaming Systems to be displayed on 4 TV’s up to 4Kx2K@30Hz. With a EDID switch to give flexibility in matching a variety of sources and TV’s you have what you need to make a successful installation. With the added RS232 control you can also integrate the switch into your 3rd party integration systems. Features: > > > > > >
Supports display resolutions up to 4Kx2K@30Hz, 1080p@120Hz and 1080p 3D@60Hz 3D video support for all 3D formats up to 297MHz TMDS clock Supports deep color up to 48-bit per pixel HDCP 1.4 support (input), HDCP 1.4a support (output) Auto EDID learning or copy mode RS232 control capability
Package Includes: H4X4-232-4K x 1 piece Power adapter x 1 piece Remote control x 1 piece RS232 cable x 1 piece Mounting ears for matrix x 1 piece Instructions Installation View:
[email protected] * 1-888-861-7351 * www.zuum.life
102815RP
Installation: Setting up Matrix Auto Mode - Step 1: Make sure EDID dip switches on front panel are all set (0000). - Step 2: Make sure all devices powered off. - Step 3: Connect HDMI input and the HDMI outputs to the Matrix, source and TV’s. - Step 4: Plug power into HDMI Matrix then power source and TV’s. (Note: If HDMI Matrix reads a TV with max 1080p output first and you have a 2nd TV attached that is 4K capable your max picture resolution will be 1080p). - For best results assign a EDID switch position that works with your lowest resolution or capable TV so that all TV’s will perform equally and you do not have to worry about certain TV’s maybe not being compatible with the EDID settings set in Auto mode. Operation Controls and Function Front Panel
ON/OFF: Power on/off switch. POWER: This red LED illuminates when the device is connected with power supply & switch on. IR IN: Remote control signal receive. OUTPUT A: Press this button to select the input source to HDMI OUTPUT A, LED illuminates when the output is select to the corresponding input.
OUTPUT B: Press this button to select the input source to HDMI OUTPUT B, LED illuminates when the output is selected to the corresponding input.
OUTPUT C: Press this button to select the input source to HDMI OUTPUT C, LED illuminates when the output is selected to the corresponding input.
OUTPUT D: Press this button to select the input source to HDMI OUTPUT D, LED illuminates when the output is selected to the corresponding input.
Rear Panel
INPUT PORTS: LED1-4 illuminate when the HDMI signal is detected. INPUT 1-4 ports are where you connect the HDMI sources.
OUTPUT PORTS: LED A-D illuminate when the TV is detected. OUTPUT A-D ports are where you connect the HDTV or monitor with HDMI cables.
RS232: This port can control the matrix via PC. DC 12V: Plug the 12V DC power supply into the unit and connect the adaptor to AC wall outlet.
[email protected] * 1-888-861-7351 * www.zuum.life
102815RP
Right Panel
EDID Selector: Select HDMI output signal format via EDID Selector. Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
EDID Selector 0000 0001 0010 0011 0100 0101 0110 0111 1000 1001 1010 1011 1100 1101 1110 1111
Description Auto mode(default) 1080I,Stereo Audio 2.0 1080I,Dolby/DTS 5.1 1080I,HD Audio 7.1 1080P,Stereo Audio 2.0 1080P,Dolby/DTS 5.1 1080P,HD Audio 7.1 3D,Stereo Audio 2.0 3D,Dolby/DTS 5.1 3D,HD Audio 7.1 4K2K,Stereo Audio 2.0 4K2K,Dolby/DTS 5.1 4K2K,HD Audio 7.1 1024x768 DVI 1920x1080 DVI PC Software control mode
Remote control OUT A: Press 1\2\3\4 button to select input source to HDMI OUT A, and the LED will indicate the corresponding input source. OUT B: Press 1\2\3\4 button to select input source to HDMI OUT B, and the LED will indicate the corresponding input source. OUT C: Press 1\2\3\4 button to select input source to HDMI OUT C, and the LED will indicate the corresponding input source. OUT D: Press 1\2\3\4 button to select input source to HDMI OUT D, and the LED will indicate the corresponding input source.
Controlling Matrix By Computer • • • •
Copy MatrixController.exe to PC which is used to control the Matrix by RS232 COM port or TCP/IP. Connect PC and Matrix by RS232 cable or RS232 to USB cable if RS232 is not an option on your PC. Power-up Matrix Double click MatirxController.exe icon to run it
[email protected] * 1-888-861-7351 * www.zuum.life
102815RP
How to control Matrix General Page
Select RS232 COM or TCP mode Select RS232 COM port Click to connect or disconnect PC and Matrix Select Matrix IP Connect to Matrix IP Search Matrix IP Configure Matrix IP and MAC Enable or disable IR /beep Device information display area Click to refresh device status: include device information displayed in area and Input/Output Settings on “Matrix” page Configure TCP Page After action edit form will pop-up as below:
[email protected] * 1-888-861-7351 * www.zuum.life
102815RP
Select auto or static IP Rewrite the Matrix IP Rewrite the Matrix MAC EDID Control Page
Set EDID mode for selected Input port or All Input ports, click “Set” button to complete action Select EDID Select Input port Copy EDID from Output port to selected Input port or All Input ports, click “Set” button to complete action. Select Output port Download EDID content to selected Input port or All Input ports, click “Download” button to complete action.
Open EDID binary file Display EDID binary file path Matrix Page
(LED) which display Input number for respective Output Click to select Input port for respective Output port Click to select previous or next Input port for respective Output port
[email protected] * 1-888-861-7351 * www.zuum.life
102815RP
FW Upgrade Page
Click to open FW file(file extension is “.fw”) Display the FW file path Displaying the progress of the software upgrade Click to upgrade the Matrix software Display the message of the software upgrade Clear the message of the software upgrade
RS232 Commands Defined: 1.RS-232 Command: Baudrate：19200 Data width: 8bit Parity: none Stop: 1bit Port switch command package length is 13byte: [0xa5+0x5b+0x02+0x03+input port(1~4)+0x00+output port(1~4)+0x00+0x00+0x00+0x00+0x00+checksum] All you need to change is just “input port”, ”output port”, ”checksum” Checksum = 0x100 – (0xa5+0x5b+0x02+0x03+input port+0x00+output port+0x00+0x00+0x00+0x00+0x00) For example: Set output 1 from input 2 command: A5 5B 02 03 02 00 01 00 00 00 00 00 F8 Port switch query package length is 13byte: This is a query command that means you must send query package and then receive an answer. For example: Query output A input port (1~4) Send package: A5 5B 02 01 01 00 00 00 00 00 00 00 FC Receive package: A5 5B 02 01 01 00 01 00 00 00 00 00 FB The red 01 mean the output port number, it should be 1~4. The blue 01 mean the input port number, it should be 1~4.
EDID set command package length is 13byte: [0xa5+0x5b+0x03+0x02+Edid index(1~15)+0x00+input port(1~4)+0x00+0x00+0x00+0x00+0x00+checksum] Means: set EDID mode to one input port [0xa5+0x5b+0x03+0x01+EDID index(1~15)+0x00+0x00+0x00+0x00+0x00+0x00+0x00+checksum] Means: set EDID mode to all input port
[email protected] * 1-888-861-7351 * www.zuum.life
102815RP
EDID index list: SE_1080I_20 SE_1080I_51 SE_1080I_71 SE_1080P_20 SE_1080P_51 SE_1080P_71 SE_3D_20 SE_3D_51 SE_3D_71 SE_4K2K_20 SE_4K2K_51 SE_4K2K_71 SE_DVI_1024_768 SE_DVI_1920_1080 SE_DVI_1920_1200
=1 =2 =3 =4 =5 =6 =7 =8 =9 = 10 = 11 = 12 = 13 = 14 = 15
EDID copy command package length is 13byte: [0xa5+0x5b+0x03+0x04+output port (1~4)+0x00+input port(1~4)+0x00+0x00+0x00+0x00+0x00+checksum] Means: copy output port X EDID to input port X [0xa5+0x5b+0x03+0x03+output port (1~4)+0x00+0x00+0x00+0x00+0x00+0x00+0x00+checksum] Means: copy output port X EDID to all input port
Output HDP (HDMI Hot-Plug Detection) status query package is 13byte: This is a query command that means you must send query package and then receive an answer. For example: Query output 1(1~4) HDP status Send package: A5 5B 01 05 01 00 00 00 00 00 00 00 F9 Receive package: A5 5B 01 05 01 00 FF 00 00 00 00 00 FA The red 01 mean the output port number, it should be 1~4. The blue FF means this port’s HPD is LOW, if 00 mean HIGH. Input port status query package is 13byte: This is a query command that means you must send query package and then receive an answer. For example: Query input 1(1~4) status Send package: A5 5B 01 04 01 00 00 00 00 00 00 00 FA Receive package: A5 5B 01 04 01 00 FF 00 00 00 00 00 FB The red 01 mean the input port number, it should be 1~4. The blue FF mean this port is plug in, if 00 mean plug out.
Beep on/off command package length is 13byte: [0xa5+0x5b+0x06+0x01+Beep onoff(0x0f:ON; 0xf0:OFF)+0x00+0x00+0x00+0x00+0x00+0x00+0x00+checksum] Beep on/off query package is 13byte: This is a query command that means you must send query package and then receive an answer. For example: Send package: A5 5B 01 0B 00 00 00 00 00 00 00 00 F4 Receive package: A5 5B 01 0B 00 00 FF 00 00 00 00 00 F5 The blue FF means Beep off, if 00 mean Beep on
[email protected] * 1-888-861-7351 * www.zuum.life
102815RP
IR Commands (NEC Code):
#define SYSTEM_CODE #define IR_KEY_POWER
0x00 0x14
#define IR_KEY_OUTPUT_1_FROM_1 #define IR_KEY_OUTPUT_1_FROM_2 #define IR_KEY_OUTPUT_1_FROM_3 #define IR_KEY_OUTPUT_1_FROM_4 #define IR_KEY_OUTPUT_1_PRE #define IR_KEY_OUTPUT_1_NEXT
0x09 0x1D 0x1F 0x0D 0x1B 0x11
#define IR_KEY_OUTPUT_2_FROM_1 #define IR_KEY_OUTPUT_2_FROM_2 #define IR_KEY_OUTPUT_2_FROM_3 #define IR_KEY_OUTPUT_2_FROM_4 #define IR_KEY_OUTPUT_2_PRE #define IR_KEY_OUTPUT_2_NEXT
0x17 0x12 0x59 0x08 0x55 0x48
#define IR_KEY_OUTPUT_3_FROM_1 #define IR_KEY_OUTPUT_3_FROM_2 #define IR_KEY_OUTPUT_3_FROM_3 #define IR_KEY_OUTPUT_3_FROM_4 #define IR_KEY_OUTPUT_3_PRE #define IR_KEY_OUTPUT_3_NEXT
0x5e 0x06 0x05 0x03 0x07 0x40
#define IR_KEY_OUTPUT_4_FROM_1 #define IR_KEY_OUTPUT_4_FROM_2 #define IR_KEY_OUTPUT_4_FROM_3 #define IR_KEY_OUTPUT_4_FROM_4 #define IR_KEY_OUTPUT_4_PRE #define IR_KEY_OUTPUT_4_NEXT
0x18 0x44 0x0f 0x51 0x1E 0x0E
Specification:
Model:
H4X4-232-4K
Frequency Bandwidth Input Ports Output Ports Power Supply ESD Protection Human Body Dimensions - Inches Weight Operating Temperature Storage Temperature Relative Humidity Power Consumption (Max)
297MHz (10.2Gbps) 4 x HDMI Female 4 x HDMI Female DC 12V, 2.5 Amp ± 8kV (air-gap discharge) ± 4kV (contact discharge) 4.53(W) x 10.63(D) x 1.77(H) 1.98lbs 32˚F ~ 104˚F / 0˚C ~ 40˚C -4˚F ~ 140˚F / -20˚C ~ 60˚C 20 ~ 90% RH (Non-condensing) 20 watt
Do you Need Technical Support? ZUUM is proud to offer free technical support to ensure your product is operating correctly. If you are experiencing difficulties setting up this product, please call us for assistance 1-888-861-7351 or visit www.zuum.life Here for You 24/7
[email protected] * 1-888-861-7351 * www.zuum.life
102815RP
