Transcript
Specification ER1611-K
ER-GP80-K Linear motor
√
Constant control
√
ER1512-K
√
5-stage 0.8 -2.0 mm
5-stage 0.8 -2.0 mm
5-stage 0.8 -2.0 mm
X-taper blade (Moving blade)
√
√
√
Titanium coating (Fixed blade)
√
√
√
DLC coating (Moving blade)
√
√
√
Power source
AC/RC 100-240 V
AC/RC 100-240 V
AC/RC 100-240 V
Charging time
1-hour
1-hour
1-hour
Cont.. use time
50-min
50-min
70-min
Battery type
Li-ion
Ni-MH
Ni-MH
Indicator
Charge status lamp
Charge status lamp
3 LED Charge status lamp
Comb attachment
3/4, 6/9, 12/15 mm
3/4, 6/9, 12/15 mm
3, 4, 6, 9, 12, 15 mm
17.6 x 4.7 x 4.8
17.2 x 4.5 x 4.8
17.8 x 4.5 x 4.1
245 g
265 g
230 g
WER9900Y
WER9900Y
WER9900Y
Oil, Cleaning Brush
Oil, Cleaning Brush
Oil, Cleaning Brush
Cutting length adjustment
Product dimensions (cm) (H) X (W) x (D)
Body weight Replacement blade Accessory
ER1421-S Titanium coating (Fixed blade)
√
DLC coating (Moving blade)
√
ER1411-S
ER-PA11-S Cutting length adjustment Blade material
3, 6mm Long-life stainless blade √
Power source
AC/RC 100-240 V
Design blade
Charging time
1-hour
Power source
RC 230 V
Cont.. Use time
80-min
Charging time
8 hours
Battery type
Ni-MH
Operating time
60 minutes
Indicator
Charge status lamp
Battery type
Comb atatchment
3/6, 9/12, 15/18 mm
Indicator
Product dimensions (cm) (H) X (W) x (D)
16.8 x 4.5 x 4.4
Body weight Replacement blade Accessory
150 g WER9714Y
(H) X (W) x (D)
WER9713Y
Oil, Cleaning Brush
Charge Indicator 3mm / 6mm 14.8 x 3.2 x 3.5
Body weight
120 g
Replacement blade
WER-9P30-Y
(Standard blade type)
Replacement blade (Design blade type)
Accessories
Eng
Ni-MH
Comb attachments Product dimensions (cm)
ER-PA10-S
WER-9P10-Y Oil, Cleaning Brush
HAIR CLIPPER
General Catalogue
01
02
FINE BLADE TECHNOLOGY
Panasonic's new hair clipper features uniquely shaped blades providing outstanding cutting performance satisfying the strict demands of professionals.
X-taper Blades that reduce stubble
Sharp 45º blade edge
Specially designed X-taper blades firmly catch and cut hairs that are often missed to thoroughly reduce stubble.
The sharp, precise 45º blade edge provides smooth, clean cutting.
45°
■ A smoother cut result
45°
The shaped part of the X-taper blade captures any hair that enters
The sharp 45° blade prevents hair escaping and cleanly cuts it
Panasonic Technology
Legacy of Quality, Tradition of Innovation
Conventional blade
Straighter hair ends after cutting
Grabbing the hair badly with a standard cutting blade
A combination of DLC and TiN Hard Coatings for twice the durability of stainless steel and a long-lasting sharp edge.
45°
Traditional Technology
New blade
Forging
Tempering
Grinding
Inspection
Makes strong steel
Makes steel harder
Thoroughly sharpens
Maintains quality
Cutting-edge blade evolved from Japanese tradition Advancing the Japanese art of making exceptionally sharp and robust swords, Panasonic has applied state-of-the-art technology to develop blades of unprecedented quality.
03
04
NEW LINEAR MOTOR with CONSTANT CONTROL
With newly developed Constant Control, Panasonic's linear motor now provides even smoother cutting with less stress than ever before.
Constant Control
Lightweight High-Power Linear Motor
Constant Control with advanced sensor technology detects the density of hair and automatically controls the speed of blade movement to assure smooth, steady cutting. The result is a clean cut even with dense hair.
NEW
Providing 10,000 strokes per minute, Panasonic’s exclusive ultra high-speed linear motor drive is now lighter but it still provides smooth, constant cutting.
Even tufts of hair are smoothly cut with no drop in speed
Uniform cutting provides a clean finish
Blade Speed
High power is maintained to the end Blade Movement vs. Hair Density Blade Movement
Constant Control
Constant Control
6,000 Conventional Rotary Motor(Panasonic)
keeps constant speed even when cutting dense areas
No Constant Control
10,000 Linear motor
Unlike conventional rotating motors, with a linear motor rotational speed doesn't fall even when cutting dense areas of hair.
Time
Hair Density
No Constant Control
Constant Control Constant control
Blade
With constant control
Hair cut
Hair cut
Time
Blade tip amplitude The motor's power is automatically controlled to maintain a constant blade speed.
Blade
Without constant control
Current control Amplltude
Amplltude
Blade tip amplitude
Hair cut
Hair cut
When cutting dense hair, the speed at which the blades oscillate decreases.
Blade Speed
No loss of speed even when cutting dense areas 10,000 Linear motor
6,000 Conventional Rotary Motor(Panasonic) High power is maintained right up until the battery is dead.
Time
Remaining Charge
05
06
SLIM AND LIGHT DESIGN The hair clipper also has a new slim, lightweight design with an easy-to-use shape and high-grade feel, features that provide professionals with a new dimension of performance and convenience.
■ Light enough for ladies The lighter weight makes it easier even for female hairstylists to use various cutting techniques as desired.
■ Ergonomic Design for Easy Use As well as making it slim and light, the focus was on making it easy to hold. The smooth, curving, easy-to-handle body and features such as the rubber grip to prevent slipping are all designed to satisfy professional needs.
■ Quick Adjustable Dial for Easy Length Setting Turning the T dial enables adjustment of cutting length from 0.8 to 2.0 cm in 0.3 mm steps. This eliminates the need for troublesome changing of attachments and enables length adjustment with one hand while working.
■ New Battery Charger To recharge, simply place the unit in the charge stand. The compact stand is upright so it does not take up space by the washbasin. During charging, the indicator light glows red.
■ Li-ion Battery A powerful,long-lasting,environment-friendly Li-ion battery is used.
07
08
New Linear Motor Model with Constant Control
Hair Clipper
ER-GP80 1hr
Full Charge
Batteries fully rechargeable in 1 hour *
50
min
Use
Hair Clipper
ER1611 1hr
Up to 50 minutes of cordless clipping
Full Charge
Linear Motor Model Batteries fully rechargeable in 1 hour *
50
min
Use
Up to 50 minutes of cordless clipping
・New linear motor drive with constant control ・Height adjustment control dial
・Linear motor drive ・Height adjustment control dial
・X-taper, DLC coating moving blade ・Titanium coating fixed blade ・Six cutting length with three comb attachments ・Charge status lamp ・With convenient charging stand ・Cord / Cordless operation ・Litium ion Battery
・X-taper, DLC coating moving blade ・Titanium coating fixed blade ・Easy-to-handle ergonomic design ・Six cutting length with three comb attachments ・Charge status lamp ・With convenient charging stand ・Cord / Cordless operation
(Adjustable from 0.8 to 2.0 mm in five 0.3 mm steps, without the comb attachment)
(Adjustable from 0.8 to 2.0 mm in five 0.3 mm steps, without the comb attachment)
Easy-to-handle design
(image)
Height adjustment control dial
Height adjustment control dial
Easy-to-handle design
・3 / 4mm
・3 / 4mm
・12 / 15mm
・12 / 15mm
・6 / 9mm
Recharge lamp / Charge status lamp
Cord / cordless operation
Charging stand
(image)
* Continued power consumption after fully charging main body reduced by approx. 70% compared to that of our conventional ER1610 (according to our company investigation).
Comb attachment shelves / Three comb attachments
・6 / 9mm
Recharge lamp / Charge status lamp
Cord / cordless operation
Charging stand
Three comb attachments
09
10 Hair Clipper
ER1421
Rounded cutting blade upper part, especially soft to the skin
ER1411
Hair Clipper
ER1411
ER1512 1hr
Full Charge
Small, efficient cutting angle
Precision cuts with a 45° edge.
1hr
Full Charge
Batteries fully rechargeable in 1 hour *
70
min
Use
80
min
Use
Up to 70 minutes of cordless clipping
45°
Batteries fully rechargeable in 1 hour *
ER1421 (image)
Diamond-like carbon coating A combination of diamond steel and titanhard coating for doubled durabilitycompared with conventional stainless steel, and permanently sharp blades.
Up to 80 minutes of cordless clipping (image)
ER1421
ER1411
・Six cutting length with three comb attachments ・DLC coating moving blade (ER1421 only) ・Titanium coating fixed blade (ER1421 only) ・With charging stand and comb attachment shelves (ER1421 only) ・Charge status lamp ・Cord / Cordless operation
・Height adjustment control dial (Adjustable from 0.8 to 2.0 mm in five 0.3 mm steps, without the comb attachment)
・X-taper, DLC coating moving blade ・Lightweight, easy-to-handle body ・Six cutting length comb attachments ・Convenient 3-stage LED battery indicator ・With charging stand and comb attachment shelves ・Cord / Cordless operation
Titanium nitride coating
(image)
Small, efficient cutting angle
・3 / 6mm ・9 / 12mm ・15 / 18mm
* Continued power consumption after fully charging main body reduced by approx. 73% compared to that of our conventional ER1420, ER1410 (according to our company investigation).
* Continued power consumption after fully charging main body reduced by approx. 73% compared to that of our conventional ER1510 (according to our company investigation).
Stainless steel
Cord / Cordless operation
Easy-to-handle design Three comb attachments
Charging stand / Comb attachment shelves
Hair Trimmer
ER-PA11 ER-PA10 8hr
Full Charge
Height adjustment control dial
Easy-to-handle design
Convenient 3-stage LED battery indicator
(image)
60
min
Use
・3mm ・4mm ・6mm ・9mm ・12mm ・15mm
Cord / Cordless operation
Charging stand / Comb attachment shelves
Six cutting length comb attachments
Extra Blade for lines and designs
Batteries fully rechargeable in 8 hour
(ER-PA11 only)
Up to 60 minutes of cordless clipping
(image)
ER-PA11
ER-PA10
・Long-life stainless blade ・Durable long-life motor ・Extra design blade (ER-PA11 only) ・With two comb attachments ・Charge indicator ・With charging stand and comb attachment shelves
Easy-to-handle design
Recharge lamp / Charge status lamp ・3mm ・6mm
Charging stand / Comb attachment shelves
Two comb attachments
