Transcript
SAFETY FIRST!
SPECIFICATIONS
Please follow all the safety precautions listed below for safety and to reduce the risk of injury or electrical shock.
Power supply : 230V~, 50Hz, AC Power Power Consumption : 2000W
• Read this Instruction Manual carefully to maximise this appliance’s performance and keep for future reference. • Do not use the appliance other than for its intended purpose. • Always ensure that your power supply voltage matches this appliance’s rating label. • Do not use if there are any visible signs of damage to the appliance. • Do not place the appliance in humid environments or in places near water or other liquids, such as a bathtubs, washbasins, etc., otherwise the insulator of the appliance may be damaged resulting in electric shock. • Do not spill water or other liquids onto the appliance, the mains power or the plug. • Do not operate the appliance continuously, as this may cause a fire. • Do not put fingers or other objects into the air inlet or outlet, otherwise it may cause personal injury, electric shock or fire. • Do not get your hair sucked into the air inlet, as this may cause injury. • Never operate with wet hands, as this may cause electric shock. • Do not use directly on the same part of your body for long periods to avoid getting burnt. • Do not place the air outlet too close to your hair or skin. • Do not touch the air outlet and the concentrator immediately after using the appliance. • Avoid obstructing the air inlet and the air outlet • Children should be supervised to ensure that they do not play with the appliance. Do not place the appliance in places that are easy to reach by children. • We recommended that you keep a separate circuit for this appliance only. • This appliance is not intended for commercial use. • Always unplug the appliance when not in use. • Make sure that the air inlet and air exit grills are free when using the appliance. • Do not repair the appliance yourself, but rather consult an authorised expert. • For safety reasons a broken or damaged mains cable may only be replaced by an equivalent lead from the manufacturer, our customer service department or a similarly qualified person. • Keep the appliance and the cable away from heat, direct sunlight, moisture, sharp edges and suchlike. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning the use of the appliance by a person responsible for their safety. • If the mains cable is damaged it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. • When the appliance is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the appliance is switched off. • For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advise. • Warning : Do not use this appliance near water. • Warning : Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
We continually strive to improve our products, specifications may change without prior notice.
GB-4
Hair Dryer Instruction Manual L20HD10
Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or call 0870 6001 338 (UK customers only) Calls charged at National Rate.
This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product.
DGS Retail Ltd • Maylands Avenue • Hemel Hempstead • Herts • HP2 7TG • England GB-5
Congratulations on the purchase of your new Logik Hair Dryer.
We recommend that you spend some time reading this instruction manual in order to fully understand all the operational features it offers. Read all the safety instructions carefully before use and keep this instruction manual for future reference.
UNPACKING
OPERATION
OVERHEAT PROTECTION
Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to any local regulations.
1. Choose an easy to reach mains socket to connect your hair dryer so that you can unplug it immediately in emergencies.
Your hair dryer features an auto shut off function that automatically engages if the unit overheats.
The following items are included:
2. Attach the airflow concentrator to the air outlet to help with hair styling if desired. 3. The hair dryer may release a small amount of white smoke and a slight smell when being used for the first time. This is normal and is harmless to you and will disappear after using a few times.
• Before you reuse the hair dryer, please make sure the air inlet and outlet are not obstructed by hair or other objects to avoid the unit overheating again.
2 1 0
• If the unit overheats, slide the switch to the ”0” position and unplug it. Wait until it has completely cooled down before using again.
The Concentrator Nozzle (P.N.: 123-566)
• Do not place the air outlet too close to your hair or skin.
• Always unplug the hair dryer if it is not in use. • Always grasp the plug when unplugging the unit, never tug at the mains cable. The Main Unit
The Hair Brush (P.N.: 805-999)
The Instruction Manual (P.N.: L20HD10-001)
If items are missing or damaged, please contact Partmaster (UK only). Tel: 0870 6001 338 for assistance.
CLEANING 4. Make sure the power switch is in the “0” position. Plug the unit in and switch on the power switch. Your hair dryer provides two different air speeds with two different hot levels and cool air options and overheat protection. 5. Turning the hair dryer on and select the desired air speed and temperature by the power switch and temperature switch.
PRODUCT OVERVIEW
The hair dryer would not gernerate hot air unless the power switch is switched on.
1 Position
Power Switch
Position
0
OFF
1
Cool
1
Normal air flow
2
Warm
2
Strong air flow
3
Hot
4
2 3 2 1
3
5
2 1 0
7
6
1 Air Inlet
2 Hanging Loop
3 Mains Cable
4 Concentrator nozzle
5 Cool button
6 Power Switch
2. Remove the concentrator nozzle to remove hairs and dust and also air inlet. 3. Clean the unit with a slightly wet cloth then remove any excess water with a dry cloth. 4. Hang your hair dryer via the loop when it is not in use. 5. A soft day brush may be used to remove dust and hairs from the air inlet grill and front grill, to ensure proper airflow at all times.
Temperature Switch
• Never use harsh solvents to clean your hair dryer as these may damage the unit. • Do not wind the mains cable around the hair dryer to avoid damaging the mains cable.
6. Turn off the hair dryer.
3 2 1
1. Always turn off your hair dryer and unplug it before cleaning it.
Slide the power switch to position “0”.
COOLING FUNCTION
HINTS & TIPS
Press and hold the COOL button when the hair dryer is turned on to generate cool air. The power switch button is also operational in COOL AIR mode.
If your hair dryer fails to operate, please check the following:
The hair dryer would not gernerate cold air unless the power switch is switched on.
2. Has the unit overheated? (See Overheat Protection for details)
1. Is the plug plugged into a mains socket properly?
3. Does the power socket work properly? (You can test your hair dryer with another mains socket) If the problem still cannot be solved, please contact a qualified technician. Do not try to repair the appliance yourself.
7 Temperature Switch GB-1
GB-2
GB-3
