Transcript
IMPORTANT SAFETY INSTRUCTIONS TOUCH CONTROL
HAIRCUT CLIPPER HC5950
Use and Care Guide
When using an electrical appliance, basic precautions should always be observed, including the following; read all instructions before using this appliance.
DANGER
To reduce the risk of electric shock: ■ Do not reach for an appliance that has fallen into water. Unplug it immediately. ■ Do not use while bathing or in the shower. ■ Do not place or drop into water or other liquid. ■ Do not place or store this appliance where it can fall or be pulled into a tub or sink. ■ Except when charging, always unplug this appliance from the electrical outlet immediately after using. ■ Unplug this appliance before cleaning it.
■ Make sure the cord is disconnected from the clipper while storing this appliance and cord in a moisture-free area. Do not store it in temperatures exceeding 140°F (60°C). ■ Do not use this appliance with a damaged or broken cutter unit, as injury may occur. Always make sure blades are aligned properly. ■ Always attach plug to appliance and then the adapter to the outlet. To disconnect, turn all controls to OFF, then remove adapter from outlet, then detach power cord from the clipper for storage. ■ Do not use an extension cord or a voltage converter with this appliance. ■ Do not wrap the cord around the appliance. ■ Dispose of used batteries properly. Do not incinerate. Batteries may explode if overheated. Do not wrap in metal or aluminum foil. Wrap in newspaper before discarding. It is suggested that you contact local battery redemption site(s) in your area. ■ Do not run the product when charging via USB port on a PC.
LCD Screen
Product Features Titanium Coated Blade Stubble Comb 1.5mm Barber Shop #0
Motorized Comb
REFRESH YOUR LOOK Scan the QR code to check out our weekly man-style tip to keep you looking good! o r visit RemingtonProducts.com/ManStyle Join us for special offers, grooming tips and product news.
@RemReadyMan Facebook.com/RemingtonReady
Register Your New Product Today! By registering your new Remington® product, you will receive these important benefits: Proof of Ownership • Product Protection • Product Registration • Special Offers Register online at: www.RemingtonProducts.com
Battery Level
LCD Display
Touch Control Area
mm mode
B&C Short Length Comb 3-23mm Barber Shop #1-7
Comb Selection Switch
Barber Shop # Mode
Power Button Lock Indicator
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons: ■ This appliance is for household use only. ■ An appliance should never be left unattended when it’s plugged in, except when charging a rechargeable appliance. ■ Close supervision is necessary when this appliance is used by, on, or near children or persons with special needs. ■ Use this appliance only for its intended use as described in this manual. ■ Do not use attachments not recommended by the manufacturer. ■ Keep the cord away from heated surfaces. ■ Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or if it has been dropped into water. If any of these things happen, return the appliance to an authorized service center for examination and repair. ■ Never drop or insert any object into any of the appliance’s openings. ■ Do not use outdoors or operate where aerosol (spray) products are being used, or where oxygen is being administered.
Length Setting
A Long Length Comb 22-42mm Barber Shop #6.5-13
Tri Boost System
Save these Instructions Battery Indication
Cutting Motor On/Lock Switch
Motor Speed
When fully charged, the unit can be used for up to 40 minutes of cordless trimming.
Conversion Chart Barber Shop #
mm
Comb
0 1-7 7+
1.5 3 - 23 22 - 42
Stubble Comb Comb B & C Comb A
Micro USB Wall Adaptor
See Quick Start Guide to get started. Micro USB Port
Oil bottle
How to Use Notes
■ It is advisable not to use this clipper directly from the power outlet when it has been fully charged, but if while using the trimmer in cordless mode there is a noticeable drop in power, you can use directly from the power outlet. ■ If the clipper has not been used for a month or longer, it is advisable to recharge it for 90 minutes. ■ To preserve the life of the batteries, discharge them by running the clipper until the clippers stop moving. Switch off and fully recharge. Do this every six months. ■ Charge the clipper at temperatures between 40º and 90ºF. ■ Nickel-Metal Hydride batteries are included. See battery removal section for proper disposal of batteries. ■ If clipper battery is completely discharged and you desire to use the clipper in corded mode immediately, please note that there will be a 10 second delay before the motor and LCD can be activated. There will also be a slightly longer delay before the touch interface can be activated.
Charging Your Hair Clipper
■ Clipper must be turned off. ■ Insert the adapter plug into the bottom of the trimmer and plug the adapter unit into a power outlet. ■ The clipper has a typical charging time of 90 minutes. The screen will dim, then turn off when done charging. ■ The batteries cannot be overcharged, but it is recommend that charging be discontinued if the clipper will not be used for a long period of time. The battery life indicator will show that the unit is charging. The LCD screen will illuminate for several seconds before dimming, when fully charged, and the LCD screen will turn off.
USB charging
■ Clipper must be turned off. ■ Insert the USB cable into the bottom of your trimmer and the plug into the USB port on your PC. The battery life indicator will show that the unit is charging. The LCD screen will illuminate for several seconds before dimming, when full charged, the battery life indicator will show a full battery level. ■ The clipper has a typical charging time of 16 hours from USB. ■ Do not run clipper when charging via USB port on your PC.
Turning System On
■ The system can be woken up by pressing the power button. ■ If lock is off when power button is pressed the LCD will turn on. ■ If lock is on when power button is pressed the LCD will turn on and the cutting motor will turn on. NOTE: For ease of use, the user can turn on the clipper by sliding to locked when system is off.
Turning System Off
■ The power button does not turn the screen off. The system goes through a time out to shut system off. ■ When the motor is off let the product sit for 10 seconds and screen will dim. Let sit for an additional 10 seconds for system to power off.
Cleaning & Maintenance Cleaning & Maintaining Your Clipper A
Unit of Measurement (mm) or (Barber Shop #)
■ To switch between mm and barber shop numbers, press and hold power button for 3 seconds until screen blinks. Then let go (Figure A). NOTE: If you hold for 8 seconds the system will reset. ■ Press and hold for 3 seconds to switch between mm and Barber Shop #.
Touch Interface
■ The length control and Tri-speed (Figure B) are only operational with the lock off and cutting motor off. ■ Battery life remaining will work whenever the system is on. It will work in both lock and unlock modes.
B
Motor On/Lock Switch
■ To turn on cutting motor slide switch to lock (Figure C). ■ Motor can only be operated when product is locked to prevent accidental comb movement. ■ The power button can turn on/off motor when lock switch is on.
Product System Reset
The user will never have to force a system reset under normal conditions. If the clipper experiences abnormal behavior, such as low or high touch sensitivity, the system can be reset. ■ Hold power button for 8 consecutive seconds. ■ System will show 88.8mm, battery, lock and full boost level. ■ Ensure no objects, hands or fingers are near the touch buttons. ■ Push the power button once. ■ Comb will travel down to the bottom. ■ Let the product sit until the screen dims. ■ Product is now ready, turn it on and confirm function.
After each use: ■ Brush the accumulated hair from the cutters. Do not submerge the clipper in water. This product is not washable. Cleaning: ■ Do not expose this product to water, unit is not washable. ■ It is best to oil the blades with the oil provided or a lightweight sewing machine oil with 1 to 2 drops every 1 to 2 cuts. ■ The blade is removable by pressing the release button. Brush out any accumulated hair. Replace blade by aligning blade to the slot on the handle and press and until it clicks into place. Storage ■ Always store this appliance and cord in a moisture-free area. ■ Do not wrap the cord of the charging adaptor around the appliance. ■ Do not store in temperatures above 140ºF.
Troubleshooting C
The clipper does not work when turned on: ■ Clipper must be charged a minimum of 90 minutes, or use trimmer while plugged into wall. Clipper cutters do not move: ■ The cutting unit may be dirty and clogged. Clean the unit as directed in Cleaning & Maintaining section. Clipper does not hold charge: ■ Fully discharge battery by running clipper until it stops; then follow recharging instructions (see section on Charging Your Clipper). Clipper does not function properly, touch buttons not working: ■ Reset the product following instructions in How to Use section. U.S. residents: To order accessories, contact us at 800-392-6544, visit us at www. RemingtonProducts.com, or visit your local retailer. Canadian residents: To order accessories, please call 800-268-0425 or visit us at www.RemingtonProducts.com.
Battery Battery Removal
When your rechargeable clipper reaches the end of its useful life, the batteries must be removed and recycled or disposed of properly in accordance with your local and state requirements. The following procedure should be followed for battery removal: Unplug the HC5950 ■ Run down the clipper battery; ■ Remove the “comb” attachment; ■ Detach the “blade head”; ■ Remove the “head clip” using a screw driver; ■ Using a screwdriver carefully pull out the “top housing” ■ Unscrew the six screws on the “motor bracket” then lift out the “bottom housing; ■ Remove the “upper circuit board”; ■ Cut the motor connecting wires and remove the “motor bracket”, “front portion of the motor bracket”, “comb rail”, “middle motor”, and gear chains”; ■ Disconnect the batteries from the lower circuit board by solder-iron then remove; ■ The batteries are to be disposed of safely.
Warranty Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to faulty material or workmanship for a two-year period from the original date of consumer purchase. This warranty does not include damage to the product resulting from accident or misuse. If the product should become defective within the warranty period, we will replace it free of charge. Return your product with your name, address and day time phone number to: Remington Returns Center, 507 Stokely Dr., P.O. Box 1, Deforest, WI 53532. For more information call 800-736-4648 in the US or 800268-0425 in Canada. This warranty does not cover products damaged by the following: ■ Accident, misuse, abuse or alteration of the product ■ Servicing by unauthorized persons ■ Use with unauthorized accessories ■ Connecting it to incorrect current and voltage ■ Wrapping cord around appliance causing premature wear & breakage ■ Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or maintenance of this product. Spectrum Brands, Inc. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province. Some states do not allow the exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington® branded product, you are not satisfied and would like a refund, return it with the sales slip indicating purchase price and date of purchase to the retailer from whom it was purchased. Spectrum Brands, Inc. will reimburse all retailers who accept the product within 30 days from the date of purchase. If you have any questions concerning the money-back guarantee, please call 800-736-4648 in the US or 800-268-0425 in Canada. Remington Guarantees Satisfaction After 30 Days! Remington Men’s Shave and Groom 60-Day Money Back Guarantee* If within 60 days after purchasing any Remington® branded Men’s Shave and Groom product, you are not completely satisfied and would like a refund, return it with the original dated sales receipt directly to Remington® and receive a full refund.** For questions concerning the money-back guarantee, please call 800736-4648 in the US or 800-268-0425 in Canada. **Terms and conditions apply.
Terms and Conditions 1. Refund will be in the form of a check issued in US Dollars and will be provided only if all Terms and Conditions are met. 2. The following items must be returned to Remington® and postmarked no later than 60 days after purchase of the Remington® branded Men’s Shave and Groom product: a. The Remington® product; b. The original sales receipt indicating price and date purchased; and c. The completed 60-day money back guarantee form located at RemingtonProducts.com/60day. 3. In addition, Remington®, in its discretion, must determine that the returned product was used in accordance with the instruction booklet (included with the product at the time of purchase). 4. Returns should be mailed prepaid (no collect returns accepted) to: Remington 60-Day MBG 507 Stokely Drive, Box 1 DeForest, WI 53532 5. Refund does not include postage costs for the return of the product, but will include applicable taxes paid by customer, if any. 6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged product. 7. Please allow 4-6 weeks to receive your refund by check. *Applies to US and Canadian customers’ returns only.
100-240 VAC 50-60 Hz Questions or comments: Call 800-736-4648 in the US or 800-268-0425 in Canada or visit RemingtonProducts.com.
Dist. by: Spectrum Brands, Inc. Madison, WI 53711 Spectrum Brands Canada, Inc. 4180 Sladeview Cresent, Mississauga, ON L5L 0A1 ® Registered trademark of ROVCAL, Inc., a subsidiary of Spectrum Brands, Inc.
© 2012 ROVCAL, Inc. 11/12 Job# 2012-7-31_161 Manufactured to Remington’s specifications in the PRC. T22-0000868
Contains
listed adaptor
