Transcript
Half Size, 8-Hour Real-Time Security Recorder • Half Size Chassis Allows Two Units to be Mounted Side-by-side • 155 Second High Speed Rewind (T-160) • Alarm, Auto Repeat, and Series Recording Functions • Record Resume Function • Alarm Input and Warning Output Functions • Time/Date Search, Alarm Search, and Alarm Scan • Master/Slave Clock Adjustment and Eject • Tape Management Functions • Resistive Ladder Network (Optional VA-RMN01) • RS-485 (SSP) Control (SRC-850A only)
I SO 9 0 0 1
S R C - 8 0 0 A S R C - 8 5 0 A
SRC-800A & SRC-850A Real Time Security Recorder Main Features •
•
•
SSP™ Compatible for multi-unit bi-directional communications for menu set up and operational control. Using the SSP™ up to 128 recorders and 255 devices can be controlled on a single addressable cable run. Bi-directional communications feed back control and warning status to a central control point. Non-record status output both at rear panel and via RS-485. Provides two types of output whenever the unit senses a non-recording condition. Individual output can be programmed to be present at the rear panel as a ground closure or carried on the RS 485 SSP™ communications link. Alarm input, Alarm Recording Notation for identifying each alarm. Alarm input to register each alarm occurrence. When an alarm occurs a signal noting that alarm is recorded on the tape.
•
Alarm Scan, Alarm Search and Time/Date Search: Three Methods of tape search to locate any point on tape. Via Alarm Scan for playing back each in order of its recording, Alarm Search, for locating a specific alarm and Time/Date Search for accessing any point on tape by date and hour.
•
Warning out via rear panel and RS-485: For informing the operator of any unauthorized change in operating status. This output is available via a rear panel ground closure contact and by the SSP™ communications system.
•
Multiple Level Tape Protection System: A three way tape protection guards internal system components and video tape against damage due to improper tape loading and unloading and tape movement during playback and recording. A unique loading identification system ensures that the video tape is properly loaded and in contact with required system points.
•
Multiplexer Switcher Output: Available switcher output pulse ensures compatibility with most system multiplexers. 8 hour recording and playback offers the maximum amount of multiplexer update rate possible.
Specifications MODEL
GENERAL Tape cassette Recording head Playback head RECORDING SYSTEM Recording/playback time Audio Recording Forward/rewind time VIDEO Signal Format Video input Video output Horizontal resolution Signal to noise ratio AUDIO Input Output Microphone Input TIME/DATE GENERATOR 1st Line 2nd Line Format Battery Backup CONNECTORS Alarm (1 shot) input
SRC-800A & SRC-850A Standard 1/2” VHS cassette 2-video helical head Double azimuth 4-head 8H (T-160 tape) A8H (T-160 tape) Approximately 155 seconds (T-160 tape) NTSC (color)/ EIA (B/W) 525 Lines, 60 Fields/Second 1 Vp-p, BNC, 75 Ohms unbalanced 1 Vp-p, BNC, 75 Ohms unbalanced Over 350 lines (B/W), Over 300 lines (color) 45dB or more -8dBs, RCA pin jack, 27k Ohms unbalanced -8dBs, RCA pin jack, 600 Ohms unbalanced -60dB, 3.5mm Mini jack, 10k Ohms unbalanced Month, Day, Year, Weekday, Alarm Count Hour, Minute, Second 24 Hours 30 Days
Low 0V at Alarm(1 shot) in (Normally 5V, 0V:100m Sec. or More) Clock set input Low 0V at Clock set in (Normally 5V, 0V:100msec or more) Series input Low 0V at Series in (Normally 5V, 0V:1sec or more) Eject input Low 0V at Eject in (Normally 5V, 0V:100m sec or more) Warning output Low 0V(max.500mA) at warning (Open collector) THE FOLLOWING ITEMS CAN BE PRESET: VIDEO LOSS/ALARM/NON REC./MECHANISM/CLOG Clock set out Low 0V at Clock out(Normally 5V) Tape end(Series) output Low 0V(max.50mA) at tape end(series) (Open collector) Eject output Low 0V at Eject out(Normally 5V) Switch output Switching pulse(Normally 5V) Common 0V(GND) Remote control input 3.5mm mini jack Common 0V(GND) (option) Terminal for Termination X2 Short these two terminals for termination (SRC-850A only) RS485 A Non-inverting driver output/receiver input (SRC-850A only) RS485 B Inverting driver output/receiver input (option) (SRC-850A only)
ENVIRONMENTAL Operating temperature range Operating humidity range ELECTRICAL Power requirement Power consumption PHYSICAL Dimensions (W x H x D mm) Weight
41oF to 104oF (5oC to 40oC) 80% or less 120V AC 60Hz 14W 9.45 x 3.8 x 13.19 in (240 x 96.5 x 335 mm) Approximately 7.9 lbs (3.6Kg)
Specifications subject to change without notice. © 2002 SANYO Security Video
•
Series Record: Allows recorders to be linked together with no loss of recorded information during switch over periods. Three or more recorders can be linked together to provide 24 hour recording.
•
Built in Time Date Generator: Eliminates the need for expensive external time date generators. Time Date, and Alarm Count are automatically superimposed over video.
Note: RS-485 (SSP) is available on SRC-850A only.
SANYO Security Video 21605 Plummer Street Chatsworth, CA 91311 Phone: (818) 998-7322, ext. 282 Fax: (818) 717-2716 Technical Support: (888) 66-SANYO www.sanyocctv.com
