Transcript
HAMPTON® PRESSURE BALANCE BATH/SHOWER FITTING WITH METAL HANDLE
MODEL NUMBER: TRIM KITS: T215.730 Hampton BATH/SHOWER Trim Kit Metal Lever Handle. LESS Valve Body.
T212.730 Hampton SHOWER ONLY Trim Kit Metal Lever Handle. LESS Valve Body.
T211.730 Hampton VALVE ONLY Trim Kit
Cold
Metal Lever Handle. LESS Valve Body.
Hot
ROUGH VALVES: R110 Pressure Balance Rough Valve Body only Direct sweat inlets/outlets. LESS trim.
R110SS Pressure Balance Rough Valve Body only with Screwdriver stops Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R115 Pressure Balance Rough Valve Body only Female thread inlets/outlets. LESS trim. T215.730 Bath/Shower Trim Shown
R115SS Pressure Balance Rough Valve Body only with Screwdriver stops Female thread inlets/outlets. Screwdriver stops. LESS trim.
R117 Pressure Balance Rough Valve Body only PEX inlets/Direct sweat outlets. LESS trim.
GENERAL DESCRIPTION:
R117SS Pressure Balance Rough Valve Body only with Screwdriver stops
TRIM KIT Single function showerhead at maximum 2.5gpm/9.5L/min. flow rate. Metal slip-on diverter spout. Available with metal lever handle. Brass wall escutcheon.
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
ROUGH VALVE BODY Cast brass body, washerless ceramic disc valve cartridge with back-to-back capability, integrated check valves and hot limit safety stop. Cycles from “off” to “cold” to “hot”. Pressure balancing cartridge maintains constant output temperature in response to changes in relative hot and cold supply pressure. 1/2" inlets and outlets (choice of direct sweat, threaded, or PEX). Available with screwdriver stops. Rough-in plaster guard designed for use as thin-wall mounting adaptor.
PRODUCT FEATURES: Cast Brass Valve Body: Durable - Quality that will last a lifetime. Ideal material for prolonged contact with water. Ceramic Disc Valve Cartridge: Assures a lifetime of drip-free performance. Allows easy fine tuning of temperature (125˚handle rotation from off to hot).
Pressure Balancing Valve Cartridge: Maintains constant output temperature in response to changes in relative hot and cold supply pressure. Diaphragm system with integrated check valves engineered to eliminate cross flow. Avoids failure due to mineral deposits - ideal for use in hard water.
Valve body will accept a variety of decorative Bath/Shower Trims Colony®
Tropic®
Dazzle® O
H
Back-to-Back Capability: Hot and cold can be reversed
Hampton®
ff
quickly and easily.
Adjustable Hot Limit Safety Stop: Limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding.
Cold Hot
F OF
Serin®
Berwick®
H
ot
Exclusive Plaster Guard: Plaster guard is designed to
Town Square® Times Square™
protect valve during installation and serve as a mounting plate for thin-wall installations. 2 piece design allows valve to be tested prior to trim installation.
H
C OFF
Wide Rough-in Range: From 1-5/8" to 3-1/4".
SUGGESTED SPECIFICATION: Bath/shower fitting shall feature a cast brass valve body. Shall feature ceramic disc valve cartridge which is capable of back-to-back installation. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature a hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model # R11____, Trim Kit American Standard Model # T21_.730.___. B63 © 2013 AS America Inc.
Revised 10/13
HAMPTON® PRESSURE BALANCE BATH/SHOWER FITTING WITH METAL HANDLE
VALVE BODY OPTIONS 57mm - 83mm (2-1/4" - 3-1/4")
FINISHED WALL
INLETS 103mm (4-1/16") SHR. 1/2" NOM. COPPER SWEAT
51.5mm (2-1/32")
INLETS 1/2" NOM. COPPER SWEAT
127 mm (5") REF.
103mm (4-1/16")
TUB 1/2" NOM. COPPER SWEAT
SWEAT (R110) 149mm (5-7/8")
1880mm (74") FOR HEAD CLEARANCE
457mm (18") OPTIONAL
51mm (2") 103mm (4-1/16")
SWEAT (STOPS) (R110SS) SHR 1/2" NPT
INLETS 86mm (3-3/8")
194mm (7-5/8")
38mm (1-1/2")
86mm (3-3/8")
INLETS 1/2" NPT TUB PORT 1/2" NPT
THREADED (R115)
102mm (4")
130mm (5-1/8") REF.
Spout Shower
8 6 4 2 0
SHR. 1/2" NOM. COPPER SWEAT INLETS 1/2" NPT TUB 1/2" NOM. COPPER SWEAT
194mm (7-5/8")
FLOW RATE* GALLONS PER MINUTE
178 mm REF. (7") REF.
20
40
60
80
100
INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold.
CODES AND STANDARDS These products meet or exceed the following codes and standards: ANSI A 117.1 ASSE 1016 ASME A112.18.1 CSA B 125
149mm (5-7/8")
1/2" COPPER SHR. 1/2" NOM. COPPER SWEAT
TOP OF TUB RIM
103 mm (4-1/16")
TUB 1/2" NOM. COPPER SWEAT
BOTTOM OF TUB
INLETS 1/2" NPT
THREADED (STOPS) (R115SS) SHR. 1/2" NOM. COPPER SWEAT
109mm (4-1/4") 52 mm (2-1/32")
165mm (6-1/2")
SHR. 1/2" NOM. COPPER SWEAT
52 mm (2-1/32")
104 mm (4-1/16")
104 mm (4-1/16") TUB 1/2" NOM. COPPER SWEAT
1/2" PEX INLETS (ASTM F1807)
PEX (R117)
1/2" PEX INLETS (ASTM F1807)
TUB 1/2" NOM. COPPER SWEAT
Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.
PEX (STOPS) (R117SS)
TRIM KITS *
Finish Options Polished Chrome
Product Number Description
002
PVD Polished Brass 099
PVD Satin Nickel 295
T215.730 Bath/Shower Trim Kit. Metal Lever Handle. LESS Valve Body. T212.730 Shower Only Trim Kit. Metal Lever Handle. LESS Valve Body.
ROUGH VALVE BODIES
T211.730 Valve Only Trim Kit. Metal Lever Handle. LESS Valve Body.
Product Number Description R110
Rough Valve Body less trim. Direct Sweat inlets/outlets.
R110SS
Rough Valve Body less trim. Direct Sweat inlets/outlets with Screwdriver Stops.
R115
Rough Valve Body less trim. Female Thread inlets/outlets.
R115SS
Rough Valve Body less trim. Female Thread inlets/outlets with Screwdriver Stops.
R117
Rough Valve Body less trim. PEX inlets/ Direct Sweat outlets.
R117SS Rough Valve Body less trim. PEX inlets/ Direct Sweat outlets with Screwdriver Stops. * TRIM & ROUGH MUST BE ORDERED SEPARATELY. B64 © 2013 AS America Inc.
Revised 10/13
