Hand Tackers - Fortronic As

Transcript

FA ST E N I N G 855-3050 GB 02/11 Technical specifications and designs are approximations, subject to change without notice. We accept no liability for printing errors. P R O D U C T C ATA L O G U E FA ST E N I N G SY ST E M S Visit us on the Internet at: www.novus.de FA ST E N I N G P ROMOT I N G SA L E S Informative and well-structured: the riveting-tool range at the POS. Contacts Sales STEINEL Vertrieb GmbH Dieselstrasse 80 – 84 33442 Herzebrock-Clarholz Internet: www.steinel.de e-mail: [email protected] NOVUS GmbH & Co. KG is a company of the Central switchboard Telephone Fax +49 (0) 5245 4 48 - 0 +49 (0) 5245 4 48 - 197 Order submission Telephone Fax +49 (0) 5245 4 48 - 192 +49 (0) 5245 4 48 - 240 +49 (0) 5245 4 48 - 228 +49 (0) 5245 4 48 - 258 +49 (0) 5245 84  49 74 +49 (0) 52 45 84  49 75 Accounting department Telephone +49 (0) 5245 4 48 - 130 Warranty service Telephone +49 (0) 5245 4 48 - 188 Service line Telephone +49 (0) 5245 4 48 - 188 Monday - Friday Saturday 8.00 a.m. - 8.00 p.m. 9 a.m. - 4 p.m. This provides step-bystep guidance on how riveting works. Free consumer advice on the various riveting tools and the riveting process. Easy-to-follow guidance taking users directly to the product they are looking for. Display of application areas. 200 cm Packaging to create brand recognition showing all necessary product information. Valid from August 2010 Delivery exclusively through the specialist retail trade. This catalogue supersedes all previous editions. Subject to change without notice. 50 cm 2 71 Contents Contact persons Contents Philosophy 2 3 4–5 Tackers Tacker types Application areas Code system 6 – 7 8–9 10 11 Hand tackers Example applications, features J-01 A J-02 AL J-08 XX J-16 EADHG J-09 XX J-17 DA J-19 EADHG J-18 Cable tackers Example applications J-08 MP J-19 OKY Hammer tackers J-021 H J-032 G 12 – 15 16 – 17 18 – 19 20 21 22 – 23 Electric tackers Example applications, features J-102 DA J-105 EADHG J-165 EAD J-165 EC J-155 A J-171 J-214 EA 24 – 27 28 – 29 30 – 31 Airtackers Example applications, features J-316 A J-328 EC 32 – 34 35 Fastener system Range of fasteners Comparable fasteners Summary 36 – 37 38 – 41 42 – 43 44 – 45 Riveting tools Application Application areas Code system 46 – 47 48 – 49 50 51 Blind riveting tools Example applications, features J-50 A J-50 A Set J-53 ASC J-55 ASC J-60 ASC 52– 54 55 56 – 57 Rivet nut setting tool Example applications, features J-65 AS 58– 60 61 Riveting materials Blind rivets Rivet nuts Summary 62 – 63 64 – 65 66 – 67 68– 69 Promoting sales 70 – 71 3 A brand aware of responsibility. Sharing commitment for shared success. Novus GmbH & Co. KG is part of the Erwin Müller Group that also includes Dahle Bürotechnik, emco bau, emco bad, emco klima as well as emco electroroller and employs over 1.000 members of staff world-wide. Certified for your safety. The Erwin Müller Group Lingen is committed to the highest standards of quality, safety and environmental protection. They have developed a clear ecological program based on the international eco-management system EN ISO 14001. Modern engineering and systems management ensure environment friendly production. With few exceptions, our products are developed in-house and manufactured to EN ISO 9001 providing exceptionally high quality and long life. The basis for good work. Novus is your specialist in universal fastening products. The products we develop help people to work more safely and efficiently – every day and for every application. Since the company was founded in 1949, the Novus brand has been synonymous with technically advanced products developed through “German engineering”. Numerous innovations and patents demonstrate our expertise time and again. The human being as the yardstick. We know from decades of experience we can turn good ideas into high quality products for the domestic, DIY and professional user to make the home an even lovelier place to live in and also show what they're capable of. 4 P H I L OSO P H Y Fastening systems for everyday use. Quality tackers and riveters for any application. For more than 50 years now, Novus has been developing tackers and riveting tools for a whole host of different need and expectations. Our quest for perfection constantly allows us to manufacture new, innovative products. Suitable for use with a wide range of materials, Novus tackers and riveting tools take the effort out of any fastening work. Providing the last word in safety, as proven by recognised certificates. Functional design and practical extras. Special operating functions, such as distance holder on tackers and the pivoting head on riveting tools make our tools extremely user friendly for a whole host of different jobs. The easy-to-follow code system and product designation shows you which fastener or riveting material is suitable for which tool. Time to do the job properly: Time for Novus fastening technology. 5 6 TA C K E R S 7 Tackers don't just mean stapling ... ... because there's the right tacker for all home and DIY applications. This brief summary of tacker options shows you which tool to choose. Novus distinguishes between standard DIY jobs, professional applications as well as special tools, such as for wiring work or panelling. You're sure to find the tacker you need right here. To Novus, reliability matters. Novus tackers are designed to keep going no matter how they're used. Provided they are used as intended, Novus tackers come with a 2-year guarantee. Hand tackers In general, hand tackers can be used for domestic and DIY applications. The fastener is fired and driven in by a finger-tensioned spring. We at Novus constantly improve the technical standard of our hand tackers for low-recoil, fatigue-free usage. Hammer tackers Hammer tackers are suitable for all applications in which speed is more important than precision fastening. They are extremely easy to handle and can be used, for example, for attaching roof felt, sheeting and underroofing. 8 Tack e r t yp e s Electric tackers Electric tackers can be used for a whole host of DIY and professional applications. Unlike hand tackers, the staple is fired automatically and electrically after pressing the trigger. This is why electric tackers are also particularly recommended for time-consuming interior finishing work. Needless to say, this is where Novus attaches particular importance to convenient and safe handling. Cordless tackers The cordless tacker is ideal for general-purpose use beyond the reach of a power socket. What's more, they come with all the benefits of an electric tacker. Airtackers The powerful air tackers from Novus are primarily intended for professional use. Firing the staple with extreme force, these tools can even be used without a problem for professional upholstering and heavy-duty panelling work. 9 Application areas Foils Fabrics / cloth Fine wire staple Profiled boards / panels Narrow crown staple Cables up to 500 volts ~ Insulated cable staple 10 Flat wire staple Decorative profiles Nail Dowelling Round staple A P P L I C A T I ON A R E A S A N D C O D I N G S Y STE M Selecting staples the easy way A B C R To find your way around the extensive range of fasteners, Novus gives you the best guidance you could ask for – in the form of the Novus colour code system. In addition to commonly used designations, Novus fasteners also carry an additional marking. And this makes it easy for you: The combination of colour code and letter clearly categorises the Novus range of fasteners, immediately showing you which staples you need. You will find the colour code system in the product descriptions in this catalogue as well as on the fastener packages. The product designation on the tool indicates the staples you can use. This makes it easy to choose the right staple: The XX part of the designation for the J-08 XX and J-09 XX tools additionally indicates they are suitable for use with most fine wire and flat wire staples: H g CLASSIFICATION Professional Tools for professional use with added safety and performance for maximum convenience. Universal Versatile, standard tools for normal-duty use. DIY Practical tools for light-duty jobs and domestic use. 11 12 H A N D TA C K E R S Making a canvas Fixing paper tablecloths Amateur and professional artists use the hand tacker to make their canvasses. Here too, stapling is far easier and faster than using sticky tape and drawing pins. Fastening chicken wire to a pen Lining a miniature pond Fix the chicken wire to the wooden frame quickly and easily. To make a miniature pond, use a tacker to attach the liner to the wooden barrel. You will find other practical examples of the many different uses for these tools by going to www.novus.de 13 Perfection is a matter of detail – hand tackers for general-purpose use. Impact power adjuster The impact power adjuster permits manual selection of the driving force to suit the receiving material. Multistroke function To drive the fastener in all the way, the hand tacker can be set to multistroke function if it is left proud after the first stroke. Staple inspection window The open staple channel shows how many staples are left in the magazine. Snap lock Nozzle The tacker's narrow and long nozzle also permits precision stapling at hard-to-reach places. 14 The bottom loading mechanism permits rapid troubleshooting. H A N D TA C K E R S Lock-down handle The tacker handle can be locked down when not in use or for storage. Belt hanger If both hands are needed for working, the tacker can simply be hung on the belt hanger. Integrated staple pusher Staple pusher attached to the tool for easy refilling. Distance holder The distance holder allows you to drive in a row of staples parallel to the edge. Safety lock release The patented safety lock release ensures that tackers can only be opened and refilled in the position intended for this purpose. 15 The small DIY tackers for standard jobs. Hand tackers are the ideal helpers around the home, while gardening or for the creative DIYer. NOVUS J-01 A The basic hand tacker made of ABS plastic material for occasional garden or home use. Featuring lock-down handle and rear-loading mechanism. Art. No.: 030-0417 Weight: EAN: approx. 215 g 4009729024898 NOVUS J-02 AL The large DIY tacker made of ABS plastic material for home and garden use. Featuring lock-down handle and rear-loading mechanism, this tacker can also fasten dowelling in a diameter of up to 6 mm. Art. No.: 030-0416 Weight: EAN: approx. 325 g 4009729022788 6 mm dia. max. 16 H A N D TA C K E R S The professional lightweight tackers for general-purpose use. These lightweight hand tackers made of ABS plastic material are ideal for general-purpose home and DIY use. NOVUS J-08 XX The small hand tacker with high-quality ABS plastic housing for general-purpose use. Using the slide mechanism at the front, the tacker can easily be adjusted for using fine and flat wire staples. It also features bottom-loading mechanism with safety lock release, snap lock, lock-down handle, staple inspection window and belt hanger. Art. No.: 030-0407 Weight: EAN: approx. 260 g 4009729020265 NOVUS J-16 EADHG The large hand tacker with high-quality ABS plastic housing for general-purpose use. Nozzle and multistroke function for precision fastening. Featuring bottom-loading mechanism with safety lock release, snap lock, impact adjustment, distance holder, lock-down handle, staple inspection window and belt hanger. Art. No.: 030-0390 Weight: EAN: approx. 500 g 4009729015599 *Paneelklammer All products carry the GS approval of product safety. 17 The robust, professional tackers for universal application. These robust hand tackers are suitable for all kinds of jobs around the home as well as for DIY work. M et al l NOVUS J-09 XX The small professional tacker with durable, particularly low-recoil, diecast zinc housing for a wide range of different jobs in the home, DIY and workshop. Using the slide mechanism at the front, the tacker can easily be adjusted for using fine and flat wire staples. It also features bottom-loading mechanism with safety lock release, snap lock, lock-down handle, staple inspection window and belt hanger. Art. No.: 030-0408 Weight: EAN: approx. 610 g 4009729020258 M et al l NOVUS J-17 DA The durable hand tacker with high-quality, extremely lightweight hi-tec magnesium housing is ideal for general-purpose use in the home, DIY and workshop. Using the slide mechanism at the front, the tacker can easily be adjusted for using fine and flat wire staples. It also features bottom-loading mechanism with safety lock release, impact adjustment, lock-down handle and staple inspection window. Art. No.: 030-0423 18 Weight: EAN: approx. 480 g 4009729042755 *Paneelklammer H A N D TA C K E R S The large professional tackers for standard jobs. The professional hand tackers for a wide range of different work, such as for panelling. NOVUS J-19 EADHG M et al l The powerful professional tacker with durable, particularly low-recoil, diecast zinc housing for a wide range of different jobs in the home, DIY and workshop. Nozzle and multistroke function for precision fastening. Featuring bottom-loading mechanism with safety lock release, snap lock, impact adjustment, distance holder, lock-down handle, staple inspection window and belt hanger. Art. No.: Weight: EAN: 030-0386 approx. 1000 g 4009729014615 *Paneelklammer et al l NOVUS J-18 M The large robust hand tacker with sheet steel housing is particularly suitable for wall panelling with thin tongue-and-groove clips. Featuring infinitely variable impact power adjuster, nozzle for precision fastening and lock-down handle. Art. No.: 030-0185 All products carry the GS approval of product safety. Weight: EAN: approx. 900 g 4009729001653 19 Different cables can be laid neatly using a cable tacker. Cables up to 500 volts ~ can be easily laid with the J-19 OKY. 20 Stapling is also ideal for securely training climbing plants. The insulated cable staples do not damage the plant. C A B L E TA C K E R S The professional tackers for laying cables the easy way. The NOVUS J-08 MP and NOVUS J-19 OKY are ideal for fastening cables carrying up to 500 volts ~. These cable tackers are suitable for different cable diameters and take insulated staples. NOVUS J-08 MP Ne w The cable tacker made of ABS plastic material for securely fastening power cables carrying up to 500 volts ~. It uses insulated cable staples for different cable diameters from 6-8 mm as well as for flat cables from 4.5 to 6 x 10 mm. mm mm 7mm 10 1010 mm mm mm 10 1010 mm mm mm ØØ8-9 Ø8-9 8-9 mm mm mm 121212 mm mm mm 9-11 mm mm mm ØØ9-11 Ø9-11 Art. No.: 030-0430 Weight: EAN: approx. 410 g 4009729045336 max 500 volts 500Volt max. 6 mm 9 mm et al l NOVUS J-19 OKY High-quality cable tacker with durable, particularly low-recoil diecast zinc housing. It uses insulated cable staples for different cable diameters from 8-12.5 mm as well as for flat cables from 4 to 7 x 12.5 mm. M 2,5 12,5 12,5 mm mm mm Ideal for laying cables on wood or similar surfaces suitable for stapling to. Features rear-loading mechanism. Supplied in practical case, including 141414 mm mm mm ØØ11-12,5 Ø11-12,5 11-12,5 mm mm mm staples. Ideal for securely laying cables on wood or similar surfaces suitable for stapling to. Featuring rear-loading mechanism and impact power adjuster. Supplied in practical case, including staples. Art. No.: 030-0422 Weight: EAN: approx. 760 g 4009729041659 max 500 volts 500Volt max. 10 mm All products carry the GS approval of product safety. 12 mm 14 mm 21 22 H A M M E R TA C K E R S The rapid-strike tackers for large areas. Novus hammer tackers are suitable for all work that doesn't demand precision fastener positioning. e. g. roofing, underroofing, fixing of foils, lining of transport boxes with fabrics or foils etc. They are very easy to handle. M et al l NOVUS J-021 H Small hammer tacker for fine wire staples of up to 6 mm in length. The top-loading mechanism and ergonomically designed handle ensure easy handling for all situations where speed counts. Practical: All parts of the top-loading mechanism are firmly integrated so that nothing can go missing. Art. No.: 030-0371 Weight: EAN: approx. 405 g 4009729010068 M et al l NOVUS J-032 G Lightweight hammer tacker for flat wire staples of up to 10 mm in length. The top-loading mechanism and ergonomically designed handle ensure easy handling for all situations where speed counts. Practical: All parts of the top-loading mechanism are firmly integrated so that nothing can go missing. Art. No.: 030-0424 Weight: EAN: approx. 495 g 4009729045084 23 24 E L E C T R I C TA C K E R S Making wall decorations Building nesting boxes You can make unique wall decorations in next to no time with your very own favourite fabric. Minor jobs involving thinner/softer-type materials are better tacked than hammered – and the bird house is ready to put up before you know it. Trellis Panelling a ceiling Trellis for climbers is tacked together in a matter of moment and gives plants exactly the support they need. Panelling made easy. Novus electric tackers give you a personal professional helper for panelling jobs with and without tongue-and-groove clips. You will find other practical examples of the many different used for these tools by going to www.novus.de 25 Perfection is a matter of detail – the innovative professional tackers to make work easy. Low design height Compact and easy to handle with a design height of just 20 cm. Multistroke function While pressed down, the locking button prevents fasteners from being fed forward. This way, a staple still standing proud can be driven in all the way by pressing the trigger a second time. Trigger Pressing the trigger fires a shot. Snap lock Integrated staple pusher Extra-narrow nozzle Staple pusher attached to the tool for easy refilling. 26 Permits precision attachment of tongue-andgroove boards in the groove cheek. The snap lock quickly eliminates blockages and permits easy attachment of the panel clip guide. E L E C T R I C TA C K E R S Safety lock release The patented safety lock release ensures that tackers can only be opened and refilled in the position intended for this purpose. – Electronic impact power adjuster + Guarantees the right impact power for every job, no matter whether you're fastening into hard or soft wood. Trigger catch Tacker is only ready for use after pushing back the trigger catch. Panel clip guide Staple inspection window The open staple channel shows how many staples are left in the magazine. Distance holder Panel clip guide for positioning tongue-and groove panelling clips. Always in easy reach on the righthand side of the tool. The distance holder allows you to drive in a row of staples parallel to the edge. 27 The basic electric tackers for standard applications. Electric tackers for getting the job done quickly and easily in the home and DIY. NOVUS J-102 DA The attractively priced electric tacker for the home, DIY and decoration. Using the slide mechanism at the front, the tacker can easily be adjusted for using fine and flat wire staples. It also features bottom-loading mechanism with safety lock release for refilling staples quickly and easily. Includes trigger guard and staple inspection window. Art. No.: 031-0354 Weight: EAN: approx. 1000 g 4009729041802 Cable length: more than 2.5 m *Paneelklammer NOVUS J-105 EADHG The small universal tacker for interior finishing work and decoration. With bottom-loading mechanism and safety lock release for refilling staples quickly and easily. Featuring nozzle for precision handling, snap lock, impact adjustment, distance holder, trigger guard and staple inspection window. Art. No.: 031-0333 Weight: EAN: approx. 1160 g 4009729016411 Cable length: more than 3 m *Paneelklammer 28 E L E C T R I C TA C K E R S The innovative professional tackers to make work easy. Both tools come with technical features that demonstrate the convenience and outstanding quality of the J-165: user-friendly, ergonomic styling, low overall height, non-recoiling operation, impact power control and snap lock. NOVUS J-165 EAD The extremely low-recoil, universal tacker for professional upholstering, insulation work and panelling with tongue-and-groove clips. With long nozzle for precision fastening at hard-to-reach places. Featuring rear-loading mechanism with integrated staple pusher, snap lock, multistroke function, impact power adjuster and staple inspection window. Art. No.: 031-0326 Cable length: more than 3.5 m Weight: EAN: approx. 1750 g 4009729014547 E D A 8 10 (V2A) 12 14 16 18 20 8 10 12 14 (D*) 18 (D*) *Paneelklammer 16 19 NOVUS J-165 EC The extremely low-recoil panelling tacker is also suitable for fastening standard panelling clips. With long nozzle for precision results. Featuring rear-loading mechanism with integrated staple pusher, snap lock, multistroke function, impact adjustment and staple inspection window. Art. No.: 031-0324 Weight: EAN: approx. 1640 g 4009729011799 Cable length: more than 3.5 m All tools carry the GS equipment safety label and CE mark of approval. 29 The universal electric tackers for professional use. These universal electric tackers come with technical features to make them ideal for professional fastening results in the home and DIY. NOVUS J-155 A The universal electric tacker for many different jobs in the home, garden, in DIY and the workshop. With nozzle for precision results. Featuring multistroke function, limit stop, impact adjustment, convenient shear-off system for cutting leg length to size, and blank firing guard. Carton Art. No.: 031-0298 Weight: approx. 1770 g Carton EAN: 4009729004166 Case Art. No.: 031-0301 Cable length: over 3 m Case EAN: 4009729004203 AA AA 8 8 8 8 10 (V2A) 10 (V2A) 10 (V2A) 10 (V2A) 12 12 12 12 12 12 14 14 14 14 15 15 16 16 16 16 DD DD E E EE 8 8 8 8 10 10 10 10 12 12 12 12 14 (D*)14 (D*) 14 (D*) 14 (D*) 12 12 15 15 1818 1818 1818 1818 1818 18181919 1919 (D*)(D*) (D*)(D*) *Paneelklammer *Paneelklammer *Paneelklammer *Paneelklammer NOVUS J-171 Using narrow crown staples and nails up to 30 mm, this professional electric tacker the ideal choice for panelling work with and without standard panelling clips. With long nozzle for precision fastening at hard-to-reach places. Featuring rear-loading mechanism, snap lock, multistroke function, impact adjustment and staple inspection window. Art. No.: 031-0061 Weight: approx. 2300 g Cable length: EAN: over 3 m 4009729001776 30 30 30 E L E C T R I C TA C K E R S The cordless tacker for complete flexibility. The universal J-214 EA cordless tacker from Novus is ready for use anywhere – also when there's no power socket to hand. It is perfect for decorating, home and DIY. NOVUS J-214 EA The practical cordless tacker with soft-touch handle for all fastening jobs without access to a power socket in decoration, around the home and in DIY. With blank firing guard for added safety, practical LED light for illuminating the work area, bottom-loading mechanism, impact power adjuster and staple inspection window. Supplied with two rechargeable batteries and charger in a case. Art. No.: 031-0351 + two 3.6-volt Ni-MH rechargeable batteries + charger in a practical case Weight: EAN: approx. 1300 g 4009729041765 Perfectly illuminated work area For the right light wherever you're stapling. For working flexibility and fast battery re-charging. All tackers carry the CE mark, the J-155 A and J-171 also come with the GS label of tested safety. 31 32 A I R TA C K E R S Upholstering Threadbare upholstered surfaces/seats can be spruced up again simply by tacking on new fabric. Attaching decorative mouldings Panelling Decorative mouldings are reliably tacked in place without a problem. The professional airtackers are suitable for panelling walls and ceilings. 33 Muffler For exceptionally low noise levels Non-recoiling Essential to user comfort. Magazine safety catch Prevents the magazine from being opened unintentionally. Top-loader with integrated staple pusher With integrated staple pusher for fast and easy refilling. Extra-narrow nozzle For fastening in places that are difficult to reach. Blank firing guard The tool can only be fired when held against a surface. Light-alloy housing Guarantees long life and low weight. 34 Universal An extra trigger catch with clip guide is supplied with the tool. Staple inspection window Shows how many fasteners are left in the magazine. A I R TA C K E R S The professional tackers designed specifically for textiles or heavy-duty panelling work. Compressed-air tackers are mainly recommended for the ambitious tradesperson or professional use. The airtacker with light-alloy housing for professional upholstering and decorating. M et al l NOVUS J-316 A With long nozzle for precision fastening at hard-to-reach places, sound muffler, trigger guard, bottom loading system with integrated staple pusher. Supplied in a practical carrying case. Art. No.: 032-0033 Working pressure: 7 bar Max. oper. pressure: 4-7 bar Air consumption: approx. 0.066 l/nailing at 6 bar Weight: EAN: approx. 920 g 4009729022375 M et al l NOVUS J-328 EC The professional airtacker with light-alloy housing is ideal for panelling work. With long nozzle for precision fastening, sound muffler, blank firing guard, top-loading system and integrated staple pusher. Supplied in a practical carrying case. Art. No.: 032-0034 Working pressure: 4-7 bar Max. oper. pressure: 8 bar Air consumption: approx. 0.074 l/nailing at 6 bar Weight: EAN: approx. 1200 g 4009729022382 All tools carry the CE mark. 35 36 F A STENE R S Y STE M Important information on NOVUS fasteners NOVUS offers for each type of work the matching fasteners in length and dimension. They are all manufactured from top-quality materials using state-of-the-art technology. Novus only uses steel wires with a galvanised surface – for a high level of environmental compatibility and optimum rust protection. The V2A staples made entirely from stainless steel are particularly suitable for permanent use outdoors. Only hard wire is used for lengths of 8 mm and over. The "super-hard" designation denotes top-strength steel wire, indicating of just how sturdy the staple is. Ideal staple length 1/3 2/3 You are always on the safe side with the right staple length. You should use 1/3 of the staple's length for the material you are fastening. We recommend allowing 2/3 of the staple's length for the material you are fastening into, such as soft wood. If you are using hard wood for stapling into, a ratio of 1 to 1 will suffice. Transparent packaging The NOVUS transparent packaging is designed for presentation on hooks. These are intended for the low-volume and domestic user. These packagings are made from environment-friendly, recyclable PET plastic and can be closed again. Volume pack The attractively priced volume pack from Novus is available for major projects. The window shows how many staples are left in the pack. 37 Fine wire staple Ideal for fastening: • fabrics / textiles • thin metal chains • wire netting • thin wooden strips A NOVUS Type 53 53/ 0,75 mm 11,3 mm 4 6 8 10 12 14 16 18 mm B 1000 pcs. 53/6 53/8 53/10 super-hard 53/10 V2A stainl. steel 53/12 super-hard 53/14 super-hard 53/18 super-hard 042-0740 042-0741 042-0357 042-0458 042-0358 042-0359 042-0360 Economy carton packaging Quantity: Designation: Art. No.: EAN: 042-0516 4009729006450 5000 pcs. 53/6 53/8 super-hard 042-0517 4009729006467 53/10 super-hard 042-0518 4009729006474 53/14 super-hard 042-0520 4009729006498 4009729041369 4009729041376 4009729002032 4009729003305 4009729002049 4009729002056 4009729002063 NOVUS Type NT NT/ 4 6 8 10 12 0,75 mm 13 mm 15 mm H 0,75 mm 10,6 mm 38 Transparent packaging Quantity: Designation: Art. No.: EAN: 2000 pcs. 53/4 042-0354 4009729002001 53/6 042-0355 4009729002018 53/8 042-0413 4009729003213 53/8 super-hard 042-0356 4009729002025 Transparent packaging Quantity: Designation: Art. No.: EAN: NT/4 042-0361 4009729002070 1600 pcs. NT/6 042-0362 4009729002087 NT/8 super-hard 042-0363 4009729002094 NT/10 800 pcs. super-hard NT/12 super-hard Economy carton packaging Quantity: Designation: Art. No.: EAN: 5000 pcs. NT/6 NT/8 super-hard NT/10 super-hard 042-0522 4009729006511 042-0523 4009729006528 042-0524 4009729006535 042-0364 4009729002100 042-0365 4009729002117 NOVUS Type 37 37/ Transparent packaging Quantity: Designation: Art. No.: EAN: 4 6 8 10 12 14 mm Economy carton packaging Quantity: Designation: Art. No.: EAN: 2000 pcs. 37/4 super-hard 37/6 super-hard 37/8 super-hard 042-0368 4009729002148 042-0369 4009729002155 042-0370 4009729002162 5000 pcs. 37/10 super-hard 37/12 super-hard 37/14 super-hard 042-0371 4009729002179 042-0372 4009729002186 042-0373 4009729002193 1000 pcs. 37/6 super-hard 37/8 super-hard 37/10 super-hard 042-0535 4009729007303 042-0536 4009729007310 042-0603 4009729008966 R A N G E O F F A STENE R S Flat wire staple Ideal for fastening: • sheeting • aluminium laminated products • paper and card • waxed and oiled papers • labels D NOVUS Type 53 F 53 F/ 1,25 mm 11,3 mm 6 8 10 12 14 mm 53 F/ D-Spitze Transparent packaging Quantity: Designation: Art. No.: EAN: 042-0374 4009729002209 1200 pcs. 53 F/6 53 F/8 042-0375 4009729002216 600 pcs. 53 F/10 53 F/12 53 F/14 Panel clip with D-point 042-0376 4009729002223 042-0377 4009729002230 042-0378 4009729002247 Transparent packaging panel clip Quantity: Designation: Art. No.: EAN: 600 pcs. 53 F/14D (D-point) 042-0654 4009729016374 53 F/18D (D-point) 042-0650 4009729015636 The 14 and 18 mm panel clips with the D-point (staple tips with divergent point) prevent the staple shanks from driving into material parallel, thereby increasing pull-out resistance. This makes these staples ideal for fixing tongue-and-groove panelling clips to walls and ceilings. 14 1,25 mm 11,3 mm 18 mm F NOVUS Type NTF NTF/ 6 8 10 12 14 mm 1,25 mm 13 mm G 6 8 10 12 14 mm R 042-0381 4009729002278 042-0382 4009729002285 042-0383 4009729002292 Transparent packaging Quantity: Designation: Art. No.: EAN: 042-0384 4009729002308 1200 pcs. 11/6 11/8 042-0385 4009729002315 600 pcs. 11/10 11/12 11/14 042-0386 4009729002322 042-0387 4009729002339 042-0388 4009729002346 Economy carton packaging Quantity: Designation: Art. No.: EAN: 5000 pcs. 11/6 042-0527 4009729006566 11/8 042-0528 4009729006573 11/10 042-0529 4009729006580 NOVUS Type 50 50/ 1,25 mm 12,5 mm 480 pcs. NTF/10 NTF/12 NTF/14 NOVUS Type 11 11/ 1,25 mm 10,6 mm Transparent packaging Quantity: Designation: Art. No.: EAN: 960 pcs. NTF/6 042-0379 4009729002254 NTF/8 042-0380 4009729002261 6 8 10 12 14 mm Transparent packaging Quantity: Designation: Art. No.: EAN: 960 pcs. 50/6 042-0465 4009729003602 50/8 042-0466 4009729003619 50/10 042-0467 4009729003626 50/12 042-0468 4009729003633 50/14 042-0469 4009729003640 50/14 D 042-0470 4009729003831 (D-point) panel clip: see above 39 Narrow crown staple Ideal for fastening: • tongue-and groove boards • panels • fibreboards • wire netting NOVUS Type 4 C 4/ 12 15 18 23 1,1 mm 6,1 mm 26 28 30 mm Transparent packaging Quantity: Designation: Art. No.: EAN: 042-0389 4009729002353 1100 pcs. 4/12 4/15 042-0390 4009729002360 4/18 042-0391 4009729002377 4/18 V2A stainl. steel 042-0459 4009729003312 4/23 042-0392 4009729002384 4/26 042-0393 4009729002391 4/26 V2A stainl. steel 042-0460 4009729003329 4/30 042-0461 4009729003336 Fastening panels: without clip Nail Ideal for fastening: • decorative mouldings • corner mouldings NOVUS Type J E J/ 14 16 19 25 1,2 mm 40 30 mm Economy carton packaging Quantity: Designation: Art. No.: EAN: 042-0594 4009729008997 2000 pcs. 4/18 4/23 042-0595 4009729009000 4/26 042-0742 4009729041505 4/28 042-0724 4009729030998 Transparent packaging Quantity: Designation: Art. No.: EAN: 044-0073 4009729006726 1000 pcs. J/14 J/16 044-0063 4009729002414 J/19 044-0064 4009729002421 J/25 044-0065 4009729002438 J/30 044-0066 4009729002445 2600 pcs. J/16 J/19 J/25 J/30 044-0084 4009729023297 044-0085 4009729023303 044-0086 4009729023310 044-0087 4009729023327 with clip 1414 mm mm Ø 11-12,5 mm Ø 11-12,5 mm R A N G E O F F A STENE R S Insulated cable staple 500 volts ~ max. Ideal for fastening: • Round and flat cables carrying up to 500 volt ~, such as: aerial cables, telephone cable, sheathed mains-power cables NOVUS Type M Carton packaging Quantity: Designation: Colour: Art. No.: EAN: 450 pcs. M/6 white 042-0753 4009729045350 6 mm NOVUS Type P 9 mm 4.5 - 6 mm 2.5 - 4 mm 4-6 mm dia. 8 mm 6-8 mm dia. 10 mm Carton packaging Quantity: Designation: Colour: Art. No.: EAN: 450 pcs. P/9 white 042-0754 4009729045374 NOVUS Type O Carton packaging Quantity: Designation: Colour: Art. No.: EAN: 350 pcs. white O/10 042-0745 4009729041741 NOVUS Type K Carton packaging Quantity: Designation: Colour: Art. No.: EAN: K/12 white 042-0743 4009729041673 350 pcs. 10 mm 12 mm 14 mm Carton packaging Quantity: Designation: Colour: Art. No.: EAN: 350 pcs. Y/14 white 042-0744 4009729041697 4-7 mm 8-9 mm dia. 12.5 mm NOVUS Type Y 9-11 mm dia. 11-12.5 mm dia. Round staple Ideal for fastening: • wooden dowelling in a diameter up to 6 mm • wires • wire netting L L/ NOVUS Type L 1,25 mm 7,7mm 9 11 14 mm 6 mm dia. max. Transparent packaging Quantity: Designation: Colour: Art. No.: EAN: galvanised (D-point) 840 pcs. L/14 042-0727 4009729029831 41 The tool for removing staples and nails. The NOVUS J-065 is the ideal tool for easily removing any type of staple whenever necessary. Its ergonomically designed handle and low weight take all the effort out of working with the J-065, making it a particular pleasure to use. NOVUS J-065 The practical staple remover for easy removal of all types of staples. Particularly practical with its ergonomic and protective handle. Art. No.: 033-0001 42 Weight: EAN: approx. 115 g 4009729001998 C O M PA R A B L E F A STENE R S Type 53 NT 4 53 F J 4 53 F J NTF 11 37 50 AEG 53 ARROW JT 21 BLACK & DECKER A 5756A 5774 BOSCH 53(10) 58 55 BOSTITCH/ BUKAMA 180 SB 3020 RO/4 ESCO 530 958 606 530F 300 980 11 19 970 KWB 053 058 05 5 056 Nails 048/055 054 057 059 052 LUX 40-47 / 30-37 1-8 20-26 60-66 85-87 10-16 80-84 50-56 70-76 MAXICRAFT C B M H E D N F METABO 10 PIRANHA 1 9 5 7 2 RAPID 53 140 13 ROCAFIX 3 2 4 15 STANLEY A/53 B/NT G/11 H/37 050 13 SWINGLINE WOLFCRAFT T 50 K / CT A 5906A 5954 6 47/48 54 4 10 extrawide J 4 8 13 606 058 57 59 52 140 14 No 8 5 E/J 101 053 L 36 6 7 800 055 056 062 057 059 Attention: As there is no standard for staples, the dimensions of different makes may differ from each other. For this reason, NOVUS cannot accept any liability for the performance of other staple makes. This information is also subject to technical changes and error. 43 Fasteners Features Belt hanger Fine wire staple Type Length in mm Flat wire staple Type Length in mm Narrow crown staple Type Length in mm Nail Type Length in mm Lock-down handle Staple inspection window Multistroke function Round / cable staple Type Length in mm H A N D TA C K E R S J-01 A J-02 AL J-08 XX J-16 EADHG J-09 XX J-17 DA J-19 EADHG J-18 A 6-8 A 6-14 A/B/H 4-8 D/F/G 6 A/H 6-14 D/G 6-14 A/B/H 4-8 D/F/G 6 A 6-14 D 6-14 A/H 6-14 D/G 6-14 A 6-18 E 16 E 16 E 16 J-08 MP L 14 M/P 6-9 O/K/Y 10-14 J-19 OKY H A M M E R TA C K E R S J-021 H H 4-6 J-032 G G 6-10 E L E C T R I C TA C K E R S J-102 DA J-105 EADHG J-165 EAD A 6 -14 D 6-14 A/H 6-14 D/G 6-14 E 16 A 8-20 D 8-18 E 16-19 J-165 EC J-155 A A 8-18 J-171 J-214 EA A 6-14 A 6-16 D 8-18 C 15-26 E 16-25 C 12-18 E 19 C 18-30 E 16-30 E 14 E 16-30 A I RTAC K E R S J-316 A J-328 EC 44 C 12-28 auto SUMMARY Loading mechanism Distance holder Impact adjustment Long nozzle Metal tool Safety lock release Snap lock Panel clip guide Bottom loader Top loader Page Rear loader Safety lock release Integrated staple pusher 16 16 17 17 18 18 19 19 21 21 23 23 28 28 29 29 * 30 * 30 * 31 35 * * Blank firing guard: The tacker can only be fired by pressing the nozzle against a surface. 35 45 46 R I V ET I N G TOO L S 47 The range of riveting tools from Novus ... ... provides riveting technology for reliable joints. Whether blind riveting tool or rivet nut setting tool – with Novus, you'll find just the right tool for applications in the home, DIY and the workshop. Blind riveting tool Fits blind rivets for permanently joining two items together. Novus offers a range of blind riveting tools for the DIY workshop to professional use. Features, such as the 360° pivoting head, make them easy and convenient to use. The easy way to fit a blind rivet 1. Drill a hole – 0.1 mm larger in diameter than the blind rivet – into the items that are being joined together. 2. Open the handle catch and insert the blind rivet shaft into the mount. 3. Push the blind rivet shaft through the drill hole. 4. Press handles together. Repeat the process until the rivet shaft breaks off. 5. The blind rivet is now in place. 48 A P P L I C A T I ON Rivet nut setting tool Fits rivet nuts with an internal thread for quickly and easily screwing an item to. Features, such as travel limiter, ensure precision working results. The easy way to fit a blind rivet 1. Drill a hole – 0.1 mm larger in diameter than the rivet nut – into the workpiece. 2. Open handle catch and insert the threaded shaft. 3. Screw rivet nut onto the threaded shaft for a flush fit. 4. Guide rivet nut through the drill hole, set travel limiter and press handle together. 5. Securely fasten an object to the rivet nut. 49 For all applications demanding a firm joint. Whether mounting signs or attaching accessories for cars, domestic appliances and garden tools, leather articles and toys: riveting is used wherever a reliable jointing method is needed and the receiving surface or material is only accessible from one side. Non-ferrous metal, plastic, lightweight construction material, leather and fabrics A Aluminium rivet Steel sheet S Steel rivet Corrosion-proof, electrically conductive joints C Copper rivet Non-ferrous metal, plastic, lightweight construction material, leather and fabrics A Aluminium rivet nut 50 Steel sheet S Steel rivet nut A P P L I C A T I ON A R E A S The easy way to select the right riveting material AS C S A C The product designation on the riveting tool shows you which riveting material it uses. A S C CLASSIFICATION Professional Machines for professional use with added safety and performance for maximum convenience. Universal Versatile, standard machines for normal-duty use DIY Practical machines for light-duty jobs and personal use. Even after many years of everyday use, you can be sure that Novus blind riveting and rivet nut setting tools won't let you down. Provided they are used as intended, Novus blind riveting and rivet nut setting tools come with a 5-year guarantee. 51 52 B L I N D R I V ET I N G TOO L S Resistant to vibrations Quickly mended Even where rivets are constantly exposed to vibrations, they continue to provide a secure and reliable hold. Riveting can be even used for reliably repairing firm materials, like aluminium. Well prepared for school routine Mounting signs to stay on School satchels need to withstand a lot of wear and tear. Although it's not unusual for handles to come away, they can be reliably repaired with a sturdy rivet in next to no time. Signs can be securely attached to a wide range of different surfaces. 53 Perfection is a matter of detail – the blind riveting tools for permanent joints. Mounts The tool comes complete with four exchangeable mounts that take blind rivets in diameters of 2.4 as well as 3, 4 and 5 mm. Pivoting head Turning through 360°, the pivoting head even makes easy work of getting to poorly accessible places. Return spring The integrated return spring makes the blind riveting tool suitable for one-handed use. Assembly spanner The assembly spanner that's provided with the tool can be used for changing the different mounts quickly and easily whenever you need to. 54 Ergonomic, lock-together handle The blind riveting tool's ergonomically shaped handle can be locked together when not in use or for storage. Housing The riveting tool is robust and durable. B L I N D R I V ET I N G TOO L S The lightweight blind riveting tool. The lightweight blind riveting tool for DIY work uses aluminium blind rivets in a diameter of up to 5 mm. NOVUS J-50 A The lightweight blind riveting tool for occasional work. Tool body in aluminium, lever in sheet steel with four mounts and integrated assembly spanner, handle catch and return spring for 1-hand operation. Art. No.: 032-0023 Weight: EAN: approx. 465 g 4009729016268 A2,4 A3 A4 A5 NOVUS J-50 A Set The J-50 A blind riveting tool is also available in a practical case that includes 15 each A 2.4, A3, A4 and A5 aluminium blind rivets. Art. No.: 032-0037 Weight: EAN: approx. 1109 g 4009729039045 A2,4 A3 A4 A5 55 The universal blind riveting tools for riveting aluminium, steel and copper. These universal blind riveting tools are suitable for fitting aluminium, steel and copper blind rivets in a diameter of up to 5 mm. NOVUS J-53 ASC The standard blind riveting tool for general-purpose DIY jobs. Aluminium tool body and forged steel lever. Supplied with four mounts, including assembly spanner, handle catch and return spring for 1-hand operation. Art. No.: 032-0024 Weight: EAN: approx. 485 g 4009729016251 A2,4 A3 A4 A5 S3 S4 C4 NOVUS J-55 ASC The robust and universal blind riveting tool for DIY and workshop use. Aluminium tool body and forged steel lever. Supplied with four mounts, including assembly spanner, handle catch and return spring for 1-hand operation. Art. No.: 032-0025 Weight: EAN: approx. 520 g 4009729016244 A2,4 56 A3 A4 A5 S3 S4 C4 B L I N D R I V ET I N G TOO L S The blind riveting tool with the pivoting head that rotates through 360°. The blind riveting tool with the 360° pivoting head is ideal for reaching poorly accessible places, particularly on vehicle bodies. NOVUS J-60 ASC The professional blind riveting tool with pivoting head for general-purpose work with precision results in DIY and workshop. Aluminium tool body and sheet-steel lever. Supplied with four mounts, including assembly spanner, handle catch and return spring for 1-hand operation. Art. No.: 032-0026 Weight: EAN: approx. 620 g 4009729016237 A2,4 A3 A4 A5 S3 S4 C4 Versatile use The pivoting head can be moved to any position, providing the best possible access while riveting with optimum power transfer. 57 58 R I V ET N U T SETT I N G TOO L S Changing number plates Attaching nameplates to lockers Number plates can be changed with effortless ease thanks to the thread in the rivet nut. Riveting makes fast work of attaching and changing nameplates. For instance, changing-room lockers can be labelled in a matter of seconds. Screw-mounting workpieces Riveting work on vehicle bodies The thread in the rivet nut provides the capability of screwing on another workpiece. Because they are resistant to vibration, rivets also hold number plates securely in place. 59 Perfection is a matter of detail – the rivet nut setting tool for screwed joints you can rely on. Mounts The tool comes complete with three exchangeable mounts for rivet nuts in diameters of 6, 7 and 9 mm. Travel limiter Travel can be limited at a setting screw. This avoids damaging the thread and makes it easier to fit the rivet nut all the way in for a secure hold. Ergonomic, lock-together handle The rivet nut setting tool's ergonomically shaped handle can be locked together when not in use or for storage. Assembly spanner The assembly spanner that's provided with the tool can be used for changing the different mounts quickly and easily whenever you need to. 60 Threaded mandrels The tool is supplied with three threaded mandrels for different rivet nuts. Housing The riveting tool is robust and durable. R I V ET N U T SETT I N G TOO L S The rivet nut setting tool The rivet nut setting tool has the added benefit of being able to fit a rivet nut with an internal thread for screw-mounting a further item. NOVUS J-65 AS The universal rivet nut setting tool for screw mounting in DIY applications and the workshop. Aluminium tool body and forged steel lever. Supplied with three mounts and threaded mandrels, assembly spanner, setting screw for limiting travel and handle catch. Art. No.: 032-0027 Weight: EAN: approx. 580 g 4009729016220 A6 A7 A9 S6 S7 S9 M4 M5 M6 M4 M5 M6 61 62 R I V ET I N G M A TE R I A L The direct route to the right riveting material. To rivet two items together, it is important to know how thick they are. This summary shows which blind rivet or rivet nut has the right rivetable material thickness (in relation to rivet diameter and length). This size K is generally referred to as rivet grip. Blind rivet Rivet nut K Blind rivets K K Aluminium Blind rivet length Ø in mm 6 mm 8 mm 10 mm K Steel Blind rivet length Ø in mm 10 mm 12 mm A2,4 1,5-3,5 A3 2,5-3,5 4,0-5,5 5,0-7,5 S3 5,0-6,5 6,5-8,5 A4 1,5-3,0 3,5-5,0 5,0-6,5 S4 4,5-6,5 6,5-8,5 2,5-4,5 4,5-6,0 A5 K Copper Blind rivet length Ø in mm 6 mm C4 10 mm 0,5-3,5 4,5-6,0 12 mm K 6,0-8,5 Rivet nuts Aluminium Rivet nut length Ø in mm 10,5 mm A6 M4 A7 M5 A9 M6 11,5 mm 15 mm 0,5-1,5 K Steel Rivet nut length Ø in mm 10 mm A6 M4 A7 M5 1,0-2,0 1,5-2,5 A9 M6 11,5 mm 14,5 mm 0,5-1,5 K 1,0-2,0 0,5-2,0 Tips: • Washers should always be used for riveting soft materials, such as leather or plastic. • To avoid contact corrosion when joining metals, workpiece and rivet should be of the same material. • The drill hole diameter should always be 0.1 mm greater than the diameter of the blind rivet. 63 Aluminium blind rivet Ideal for fastening: • Non-ferrous metal • Plastic • Lightweight construction material • Leather • Fabrics Aluminium blind rivet in a diameter of 2.4 mm A2,4 Blister pack Length (mm): Grip length (mm): 6 1,5-3,5 Quantity (pcs.): Art. No.: EAN: 30 045-0019 4009729015940 6 Aluminium blind rivet in a diameter of 3 mm A3 6 8 10 Quantity (pcs.): Art. No.: EAN: 30 045-0020 4009729015957 30 045-0021 4009729015964 30 045-0022 4009729015971 6 8 10 70 70 70 2,5-3,5 4,0-5,5 5,0-7,5 045-0028 045-0029 045-0030 4009729016039 4009729016046 4009729016053 Aluminium blind rivet in a diameter of 4 mm A4 6 8 10 Blister pack Length (mm): Grip length (mm): Quantity (pcs.): Art. No.: EAN: 6 8 10 1,5-3,0 3,5-5,0 5,0-6,5 30 30 30 045-0023 045-0024 045-0025 4009729015988 4009729015995 4009729016008 6 8 10 1,5-3,0 3,5-5,0 5,0-6,5 70 70 70 045-0031 045-0032 045-0033 4009729016060 4009729016077 4009729016084 Aluminium blind rivet in a diameter of 5 mm A5 8 10 64 Blister pack Length (mm): Grip length (mm): 6 2,5-3,5 8 4,0-5,5 10 5,0-7,5 Blister pack Length (mm): Grip length (mm): 8 2,5-4,5 10 4,5-6,0 Quantity (pcs.): Art. No.: EAN: 30 045-0026 4009729016015 30 045-0027 4009729016022 8 10 70 70 2,5-4,5 4,5-6,0 045-0047 045-0048 4009729046838 4009729046852 B li n d riv e t s Steel blind rivet Ideal for fastening: • Sheet steel Steel blind rivet in a diameter of 3 mm S3 Blister pack Length (mm): Grip length (mm): 10 5,0-6,5 12 6,5-8,5 Quantity (pcs.): Art. No.: EAN: 20 045-0034 4009729016091 20 045-0035 4009729016107 10 12 Steel blind rivet in a diameter of 4 mm S4 Blister pack Length (mm): Grip length (mm): 10 4,5-6,5 12 6,5-8,5 Quantity (pcs.): Art. No.: EAN: 20 045-0036 4009729016114 20 045-0037 4009729016121 10 12 Copper blind rivet Ideal for creating: • corrosion-proof, electrically conductive joints Copper blind rivet in a diameter of 4 mm C4 Blister pack Length (mm): Grip length (mm): 6 0,5-3,5 10 4,5-6,0 12 6,0-8,5 Quantity (pcs.): Art. No.: EAN: 20 045-0038 4009729016138 20 045-0039 4009729016145 20 045-0040 4009729016152 6 10 12 65 Aluminium rivet nut Ideal for fastening: • Non-ferrous metal • Plastic • Lightweight construction material Aluminium rivet nut in a diameter of 6 mm with internal M4 thread A6 M4 Blister pack Length (mm): Grip length (mm): 6 0,5-1,5 Quantity (pcs.): Art. No.: EAN: 10 045-0041 4009729016169 10,5 Aluminium rivet nut in a diameter of 7 mm with internal M5 thread A7 M5 Blister pack Length (mm): Grip length (mm): 11,5 1,0-2,0 Quantity (pcs.): Art. No.: EAN: 10 045-0042 4009729016176 11,5 Aluminium rivet nut in a diameter of 9 mm with internal M6 thread A9 M6 Blister pack Length (mm): Grip length (mm): 15 1,5-2,5 15 66 Quantity (pcs.): Art. No.: EAN: 10 045-0043 4009729016183 R iv e t n u t s Steel rivet nut Ideal for fastening: • Sheet steel Steel rivet nut in a diameter of 6 mm with internal M4 thread S6 M4 Blister pack Length (mm): Grip length (mm): 10 0,5-1,5 Quantity (pcs.): Art. No.: EAN: 10 045-0044 4009729016190 10 Steel rivet nut in a diameter of 7 mm with internal M5 thread S7 M5 Blister pack Length (mm): Grip length (mm): 11,5 1,0-2,0 Quantity (pcs.): Art. No.: EAN: 10 045-0045 4009729016206 11,5 Steel rivet nut in a diameter of 9 mm with internal M6 thread S9 M6 Blister pack Length (mm): Grip length (mm): 14,5 0,5-2,0 Quantity (pcs.): Art. No.: EAN: 10 045-0046 4009729016213 14,5 67 Riveting material Blind rivet Aluminium Steel Copper Rivet nuts Aluminium Steel B li n d riv e t i n g t o o l J-50 A A2,4 A3 A4 A5 A2,4 A3 A4 A5 S3 S4 C4 A2,4 A3 A4 A5 S3 S4 C4 A2,4 A3 A4 A5 S3 S4 C4 J-53 ASC J-55 ASC J-60 ASC R iv e t n u t s e t t i n g t o o l J-50 AS 68 A6 A7 A9 M4 M5 M6 S6 S7 S9 M4 M5 M6 SUMMARY Features Lock-together handle Page Mounts Travel limiter 360° pivoting head Lever in steel sheet Lever in forged steel 55 56 56 57 61 69 Well displayed to boost sales: the tacker range at the POS. Application photos show the tackers being used. Straightforward guidance – code system for selecting the right fastener. Free consumer advice with example applications and product information. Detailed descriptions of features and applications on the tool in the RedBox. 240 cm Sample tools can be tried out in store. Packaging to create brand recognition and showing all necessary product information. A clearly structured chart guides the user to the right staple type. 125 cm 70 P ROMOT I N G SA L E S Informative and well-structured: the riveting-tool range at the POS. Contacts Sales STEINEL Vertrieb GmbH Dieselstrasse 80 – 84 33442 Herzebrock-Clarholz Internet: www.steinel.de e-mail: [email protected] NOVUS GmbH & Co. KG is a company of the Central switchboard Telephone Fax +49 (0) 5245 4 48 - 0 +49 (0) 5245 4 48 - 197 Order submission Telephone Fax +49 (0) 5245 4 48 - 192 +49 (0) 5245 4 48 - 240 +49 (0) 5245 4 48 - 228 +49 (0) 5245 4 48 - 258 +49 (0) 5245 84  49 74 +49 (0) 52 45 84  49 75 Accounting department Telephone +49 (0) 5245 4 48 - 130 Warranty service Telephone +49 (0) 5245 4 48 - 188 Service line Telephone +49 (0) 5245 4 48 - 188 Monday - Friday Saturday 8.00 a.m. - 8.00 p.m. 9 a.m. - 4 p.m. This provides step-bystep guidance on how riveting works. Free consumer advice on the various riveting tools and the riveting process. Easy-to-follow guidance taking users directly to the product they are looking for. Display of application areas. 200 cm Packaging to create brand recognition showing all necessary product information. Valid from August 2010 Delivery exclusively through the specialist retail trade. This catalogue supersedes all previous editions. Subject to change without notice. 50 cm 2 71 FA ST E N I N G 855-3050 GB 02/11 Technical specifications and designs are approximations, subject to change without notice. We accept no liability for printing errors. P R O D U C T C ATA L O G U E FA ST E N I N G SY ST E M S Visit us on the Internet at: www.novus.de FA ST E N I N G