Transcript
Hand tools
2017
PRODUCT CATALOGUE
Tools for construction and maintenance in electricity, industry and telecommunications.
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
1
Contents Screwdrivers and wrenches Ratcheting ring wrench Rubber handle Extension sleeves Reducing sleeves Torque wrench
Sealing
Sealing pliers
Cutting tools
Combination pliers MA-880 Combination pliers Klein Universal Combination pliers J2000 Cutter and wire stripper Cable cutter, NRA Combination pliers KCC-22 Universal cutter S-50 Blade S2 Cable cutters model K Cable cutters model RCS Cable cutter Cactus Cable severing kit
Pipe tools
Sub-duct cutter Sub-duct beveller Assembly tool BENTE Assembly tool for divided cableducts Divided cable-duct for joining subducts Hydraulic handheld cutters
Bolt cutters Bolt cutter
Battery-powered cutters
Battery-powered cutter, EK Battery-powered cutter, EK85-50 Stilo Cutter Battery BC1430X Charger CL1430HC
Hydraulic pump
CP-700 Hydraulic pump
Cutter heads
PS-85 Cutter head PS-95 Cutter head PS-120 Cutter head Crimper head type III
Crimping tools and dies Crimping tool EV130 Crimping dies for MJPT sleeves Crimping tool P-HV130 Crimping tool EDP62
2
4 4 4 4 5
5
5 5 5 5 6 6 6 6 7 7 7 7
8 8 8 8 9 9
10
10 10 10 11 11
11
12 12 12 12
13 13 13 14
Storage containers
Storage case X2 Die range case CP2S Tool and die case CP2MS
Crimping dies for EDP62 Crimping dies for EDP62 Crimping dies Cu, DIN Crimping dies for aluminium, DIN Circular crimping dies Crimping dies for FeAl, DIN
14 14 14
15 15 15 16 16
Crimping dies for ELPRESS sleeves
Crimping dies for Cu, Elpress 16 Crimping dies for aluminium, Elpress 16 Circular crimping dies 16 Crimping dies for FeAl (BLL) joints with ELPRESS sleeves 17 Crimping dies for C clamps 17
Crimping tool/hydraulic pliers Crimping tool EDP52 Hydraulic crimping pliers HVD51
Crimping dies
Crimping dies for ED52 Crimping dies for Cu, DIN Crimping dies for aluminium, DIN Circular crimping dies Crimping dies for FeAl, DIN Crimping dies for Cu, Elpress Crimping dies for aluminium, Elpress Circular crimping dies Crimping dies for C clamps Crimping dies for FeAl, Elpress
Strippers
Stripper knife for outer casing Stripper kit for outer casing INT Stripper tool for vulcanised semi-conductive layer Conduit saw SRS6 Stripper tool IMS2 T handle for coring stripper sleeve PEX Guide sleeves for 10 kV cable Stripper tool for semi-conductors and PEX 35-90 mm diameter Stripper kit PEX for 10-20 kV Stripper kit IMS2 + INT + outer jacker Stripper kit FIX for 10-20 kV Stripper tool FK28 Stripper tool BLL
Drills
Petrol engine drill TED262 Drill bits
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
18 18
19 19 19 19 20 20 20 20 20 20
21 21 21 21 22 22 22 23 23 23 24 24
24 24
Smart tools to make your job easier Electricians and telecom engineers need reliable tools that help streamline their processes. SAB Elteknik provides a range of hand tools with various features that make every task a little easier. The ratcheting ring wrench is an excellent example: thanks to its open sleeves, it is able to handle power-line pylons with long pin bolts: The double-edged cable cutter that quickly converts into a wire stripper is another example of a smart tool. We like to highlight our wire preparation products in particular. Try the PEX tools, the semiconductor lathe from Intercable and the BEKU cutters. With the proper tools for the job, working with medium and high-voltage cables is child's play. Are you missing something in our range? Feel free to contact us. We are always on the lookout for more smart tools for our product portfolio.
Drill/screwdriver Dewalt
Percussion drill/screwdriver, 18V DCD985M2 XRP XR 4,0Ah Drill/screwdriver, 18 V DCD780M2 XR 4,0Ah Impact wrench 18V DCF880M2 XR 4,0Ah Battery Dewalt DCB182 Slide 18V, 4,0Ah XR Charger Dewalt DCB105 10,8-18V, 4,0Ah XR Car charger Dewalt DCB119 10,8-18V, 4,0Ah XR
Heating tools
Siever Matic LPG torches Hot Air Tol E4500
Lighting
Line flashlight HARDCASE PRO Headlamp PIXA 3 Petzl Nao+ headlamp
25 25 25 26 26 26
27 27
27 28 28
Clearing tools
Felling guide Stapeln Telescopic rod BMT-S K mount with UNC 3/4” thread
Pole saw, Metering equipment Pole Saw Samurai Tape measure Range finder Forestry 550 Pro
Other tools
Terminal cabinet multi-key Line hammer Steel Hook key, round Hook key, straight Staple puller Bag for range poles
Cleaning Cleaning PF
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
29 29 29
30 30 30
31 31 31 31 31 31
32
3
Personal safety Screwdrivers and equipment wrenches Ratcheting ring wrench
Reversing with open sleeve, letting the bolt through. Rubber handle included.
SAB no
E no
Socket width Measurements Weight, kg
13280900
E1622709
10-12 mm
225 x 34 mm
0.16 kg
13280910
E1622708
11-13 mm
225 x 34 mm
0.16 kg
13281000
E1622710
13-17 mm
265 x 45 mm
0.24 kg
13281020
E1622721
16-18 mm
315 x 50 mm
0.45 kg
13281100
E1622711
17-19 mm
310 x 50 mm
0.40 kg
17-21 mm
310 x 50 mm
0.40 kg
13281200 13281300
E1622712
19-24 mm
355 x 56 mm
0.68 kg
13281350
E1622734
24-30 mm
400 x 63 mm
1.10 kg
13281400
E1627714
27-30 mm
400 x 63 mm
1.10 kg
13281500
E1622715
22-27 mm
355 x 56 mm
0.68 kg
13281600
E1622716
32-36 mm
445 x 67 mm
1.40 kg
Rubber handles
replacement handles for gluing on ratcheting ring wrenches.
SAB no
E no
13280700
Fits wrench
Weight, kg
13-17, 13-17L, 14-17L, 14-19L
0.03 kg
Extension sleeves
Automatic locking when inserted into the wrench.
SAB no
E no
Socket width Length
Weight, kg
13282000
E1622720
17
53 mm
0.08 kg
13282200
E1622722
19
53 mm
0.09 kg
13282300
E1622723
22
58 mm
0.09 kg
13282400
E1622724
24
58 mm
0.16 kg
13282600
E1622726
30
65 mm
0.26 kg
13282700
E1622727
32
68 mm
0.30 kg
13282800
E1622728
36
68 mm
0.30 kg
Reducing sleeves
Automatic locking when inserted into the wrench.
SAB no
4
E no
Socket width
Length
Weight, kg
13282900
E1622718
17 to 16
53 mm
0.08 kg
13283000
E1622719
19 to 18
53 mm
0.09 kg
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
Torque wrench, pliers Torque wrench
• The torque is set with the knob on the back of the handle. • A scale indicates the torque range. • A crackling sound indicates the achieved torque.
SAB no
E no Torque
Measure- Length ments
Weight, kg
8-54 Nm
½”
280 mm
0.80 kg
10111310
20-100 Nm
½”
340 mm
0.70 kg
10111320
40-200 Nm
½”
440 mm
1.00 kg
10110670
E1622170
Sealing pliers
Sealing pliers with wire cutter.
SAB no 09999
E no
Type
Length
Weight, kg
E1618571
Sealing pliers
160 mm
0.10 kg
09999005
Cushion PT8A
09999010
Engraving/letter
09999020
Screw for cushion
Combination pliers MA-880
Combination pliers with extra high transmission and good cutting performance Equipped with burner and crimping dies.
SAB no 12262160
E no
Length
Weight, kg
E1616803
225 mm
0.40 kg
Combination Pliers Klein Universal
Combination pliers with extra cutting power for hard wires.
SAB no 12262100
E no
Length
Weight, kg
E1616802
235 mm
0.20 kg
Combination pliers J2000
Combination pliers with extra cutting power for hard wires New comfortable handle.
SAB no 12262130
E no
Length
Weight, kg
E1616090
241 mm
0.50 kg
Cutter and wire stripper
Cutter with wave-shaped blades for both cutting and stripping wire. Can be transformed into a cable knife. High capacity.
SAB no 12262200
E no
Model
E1621360
Length
Cut/strip
Weight, kg
CC-22
162 mm
50/35 0.2-35 mm²
0.13 kg
12262300
CC-38
212 mm
50/70 1.0-50 mm²
0.15 kg
12262400
CC-60
244 mm
95/70 11-70 mm²
0.19 kg
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
5
Pliers, cutting tools Cable cutter, NRA
Cutter for wire and cable. Rounded blades.
SAB no 12262700
E no
Model
Length
Cuts
Weight, kg
E1620540
NRA22
162 mm
50/35 mm²
0.16 kg
NRA38
212 mm
70/50 mm²
0.28 kg
NRA95
210 mm
70 mm²
0.47 kg
NRA120
244 mm
95/70 mm²
0.52 kg
12262750 12262800
E1621330
12263000
Combination pliers KCC-22
Combination pliers with the following properties: • Cutting • Dismantling • Stripping
SAB no 12261000
E no
Type
Weight, kg
E1621310
160 mm
0.16 kg
Universal cutter S-50 for Al Cu for stay lines
S-50 is a universal cutter with replaceable blades for different tasks. This means that it is a very flexible and versatile cutter with new possibilities. You can cut anything from regular Al/Cu wires to stay lines and 8 mm bolts with the same cutter. The various blades and their capacity are shown below. The universal blade S2 is included when you purchase an S-50 and the blade can handle: Al Cu, 50 mm diameter Steel wire, 14 mm diameter Stay line, 25 mm²
FeAl line, 20 mm diameter (234 mm²) Steel reinforced cable, 50 mm diameter
Blade S2, a lifter for cleaning cogs and a plastic storage container are included on delivery. Case available separately.
SAB no
E no
Dimensions (LxWxH)
Weight, kg
E1621379
230 x 100 x 46 mm
1.14 kg
12206601
Case 350 x 170 x 50 mm
0.20 kg
12206002
Plastic case 255 x 210 x 57 mm
0.14 kg
12206603
Spare blade S1 63 x 45 x 6 mm
0.05 kg
12206600
Blade S2
Al Cu, 50 mm diameter Steel reinforced cable, 50 mm diameter Steel wire, 14 mm diameter Stainless wire, 8 mm diameter
SAB no
E no
12206604
6
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
Stay line, 25 mm² FeAl line, 24.5 mm diameter (234 mm²) Solid steel rod, 10 mm diameter 8.8 Bolt, 8 mm diameter
Dimensions (LxWxH)
Weight, kg
63 x 45 x 6 mm
0.05 kg
Cutting tools Cable cutters model K
Geared cutter for Al and Cu wire. Replaceable blades.
SAB no
E no
Model
Length
Capacity
Weight, kg
12206300
E1621371
K3
250 mm
Ø 35 mm
0.8 kg
12206200
E1621373
K4
320 mm
Ø 52 mm
1.0 kg
12206400
E1621375
KS45
230 mm
Ø 45 mm
0.9 kg
Cable cutters model RCS
Geared cutter for Al and Cu wire. Replaceable blades. Robust and reliable model, handles steel reinforced wires. Cog cleaner in handle. RCS handles tasks that previously required hydraulic cutters.
SAB no
E no
Model
Length
Capacity
Weight, kg
12206000
E1621365
RCS62
410 mm
Ø 62 mm
2.0 kg
12206100
E1621358
RCS80
610 mm
Ø 80 mm
3.0 kg
12206500
E1621377
RCS100
570 mm
Ø 100 mm
4.0 kg
Cable cutter Cactus
Geared cutter for Al and Cu wire. Replaceable blades.
SAB no 12205800
E no
Model
Length
Capacity
Weight, kg
E1621337
CC325
270 mm
Ø 32 mm
0.60 kg
Cable cutter Cactus
Geared cutter for Al and Cu wire. Replaceable blades.
SAB no 12205900
E no
Model
Length
Capacity
Weight, kg
E1621341
CC525
450 mm
Ø 52 mm
1.50 kg
Cable severing kit
Cable severing kit, KD-40, for maximum safety when severing power cables. KD-40 uses an explosive charge to shoot a blade into the cable. It is triggered by a fuse and the operator can take cover before shooting the blade into the cable. Delivered in a wooden box with 30 and 45 mm blades, instruction manual and tools. Cartridges are sold separately.
SAB no 12204000
E no
Model
Spec
Weight, kg
E1653505
KD-40
Ø 110 mm cable
8.3 kg
12204030
Knife 30 mm
12204045 12204084
0.1 kg
Knife 45 mm E1653506
Red cartridge
0.1 kg 50 pcs/box
0.2 kg
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
7
Pipe tools Sub-duct cutter
For an even edge when cutting subducts.
SAB no
E no
Model
Length
Capacity
Weight, kg
12262620
TC25
225 mm
Ø 25 mm
0.50 kg
12262600
TC42
225 mm
Ø 42 mm
0.50 kg
12262640
TC50
430 mm
Ø 63 mm
1.10 kg
Sub-duct beveller
Gives a smooth edge when bevelling sub-ducts.
SAB no
E no
Type
Weight, kg
12262649
2-12 mm internal bevel
0.05
12262651
3-25 mm int/ext bevel
0.07
12262652
25 mm external bevel
0.07
12262653
32 mm external bevel
0.07
12262654
40 mm external bevel
0.07
12262655
50 mm external bevel
0.07
Assembly tool BENTE
The ”BENTE” assembly tool is designed to facilitate assembling and disassembling pipes when joining. The tool works like scissors with different jaws for different pipe dimensions. The legs are long enough to provide a comfortable operating height. The tool also doubles as lifting tongs to adjust piping installation.
SAB no 57100210
E no
Description
Weight, kg
E1653509
110 mm corrugated pipe
3.5 kg
57100207
Reducing 110 to 75 mm corr. pipe
0.4 kg
57100212
160 mm corrugated pipe
3.5 kg
57100208
Reducing 160 to 125 mm corr. pipe
0.4 kg
Assembly tool for divided cable ducts
Assembly tool for pressing divided cable ducts together.
SAB no
8
E no
Description
Weight, kg
57052030
E1660995
Assembly tool for divided cable duct 32 mm
0.41 kg
57052040
E1660998
Assembly tool for divided cable duct 40 mm
0.44 kg
57052050
E1690999
Assembly tool for divided cable duct 50 mm
0.47 kg
57052090
E1653512
Assembly tool for divided cable duct 110 mm
2.80 kg
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
Hydraulic cutters Divided cable-duct for joining sub-ducts
Two divided PVC cable ducts with lengthwise lock for joining sub ducts with cable. Standard length is one metre, sections up to two metres in length can be supplied.
Coupling for divided cable-ducts
Divided clamping sleeve for securing the ducts for pressure.
SAB no
E no
Type
Measurements Weight, kg
57052032 E0665754
KHR32 divided cable duct for joining 32 mm sub duct
1m
0.36 kg
57052042 E0665755
KHR40 divided cable duct for joining 40 mm sub duct
1m
0.72 kg
57052044 E0665756
KHR40 divided cable duct for joining 40 mm sub duct
2m
0.72 kg
57052052 E0665757
KHR50 divided cable duct for joining 50 mm sub duct
1m
0.72 kg
57052038 E0665751
KHM32 Coupling for divided cable duct 32 mm
57052048 E0665752
KHM40 Coupling for divided cable duct 40 mm
57052058 E0665753
KHM50 Coupling for divided cable duct 50 mm
Hydraulic handheld cutters
Cutters for Al, Cu, wire, steel and line. Reliable hydraulics and easy to handle. Head that can be opened and quick-locked, rotates 180°. Replaceable blades. Delivered in a padded bag. * = cutting capacity – see table below.
SAB no
E no
Model
Length
Capacity
Weight, kg
12208300
E1621808
HVA 20
390 mm
Ø 20 mm*
2.8 kg
12208314
E1621810
Variable blade for HVA20
12208800
E1621830
HVA 24
426 mm
Ø 24 mm*
12208813
E1621831
Variable blade for HVA24
12208700
HVA 32
12208715
Variable blade for HVA32
12209000
HVA 55
12209017
Variable blade for HVA55 HVA 85
12208414
E1621836
Variable blade for HVA85
Cu wire
Ø 32 mm* Ø 55 mm*
6.0 kg 0.1 kg
650 mm
Ø 85 mm*
6.8 kg 0.1 kg
HVA HVA HVA HVA HVA HVA HVA 20 24 30 32 40 55 85 20 24 16 32 41 50 28
Al wire
20
24
16
32
41
55
FeAl line
20
24
16
32
38
50
Stay line 7tr
15
20
16
32
15
15
Stay line 19tr
16
20
16
32
20
20
Telecom cable Underground cable Al
5.3 kg 0.1 kg
500 mm
E1621835
4.0 kg 0.1 kg
450 mm
12208400
0.1 kg
46
85 18
24
30
32
41
50
85 50
Solid Cu alloy
20
16
16
32
22
35
Solid Al alloy
16
16
16
32
20
28
Solid Fe wire
16
20
10
25
20
22
Solid Fe rod
16
20
10
25
16
19
Steel wire
20
24
16
32
25
30
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
9
Bolt cutters, battery-powered cutters Bolt cutter
Tempered bolt cutter for cutting hard material. Adjustable and replaceable blades.
SAB no
E no
10001000
Model
Length
Capacity
Weight, kg
BK350
360 mm
Ø 7 mm
0.90 kg
10001100
E1623920
BK450H
460 mm
Ø 8 mm
1.50 kg
10001200
E1623922
BK600H
600 mm
Ø 10 mm
2.60 kg
10001300
E1623924
BK750H
750 mm
Ø 12 mm
3.90 kg
BK900H
900 mm
Ø 15 mm
5.90 kg
10001400
Battery-powered cutter, EK
Light, quick and versatile cutter for cutting Al and Cu. Perfect for restricted spaces. Powered by a 14.4 V Li-Ion battery. Dual controls with one hand for maximum safety. Cuts backwards and forwards. • Capacity: 30 cuts on 56 mm AL cable (4 x 240 mm²) • Max Cu cable 40mm • Battery BC1430X 14.4 volt, 3Ah Li-Ion
SAB no
E no
Model
Max. diameter
Weight, kg
E1621840
EK50KC
Al 52 mm/CU 40 mm
5.0 kg
EK50
Al 52 mm/CU 40 mm
2.0 kg
EK55KC
Al 56 mm/CU 40 mm
5.0 kg
83220200
EK55
Al 56 mm/CU 40 mm
2.0 kg
83220290
CM-EK
Metal storage container
3.0 kg
83220500 83220400 83220300
E1621842
Electro-hydraulic cable cutters EMK-95-120
Large diameter scissors type cutter with fast advance operation. Powerful cable cutter that generate more than 120kN in the blades. The scissors type cut provides ease of use and improved accessibility. The dual side front handle allows easy handling of the cable cutter and can also be used as a stand. Cutting capacity Cu/AL: 70 mm. SAB no 83220700
E no
Model
Weight, kg
E1621845
EMK-95-120
9,4 kg
Stilo Cutter 40 mm
• 18V Li-on Battery • Capacity 40mm AL/CU cable • Pivotable cutting head • Supplied with Battery, Charger and Case
SAB no 83220000
10
E no
Model
Weight, kg
E1661208
Stilo Cutter 40 mm Complete
2,0 kg
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
Chargers, hydraulic pump Battery BC1430X
• Li-Ion battery • 14.4V – 3.0 Ah • -20 to +50°C 138 x 99 x 75 mm • For charger CL1430HC
SAB no 83221610
E no
Model
Capacity
Weight, kg
E1661127
Battery BC1430X
14.4V 3Ah Li-Ion
0.7 kg
Charger CL1430HC
• 220 Volt charger • Charges BB1430 and BA1420 in 60 minutes • 150 x 95 x 80 mm
SAB no
E no
Model
Capacity
Weight, kg
83221760
E1661128
CL1430HC 220V
BB1430 / BC1430X: 3.0 Ah – 60 min
0.8 kg
83221770
E1661130
Adapter 12/24V for CL1430HC
0.5 kg
CP-700 Hydraulic pump
• 700 bar pump with I-drive technology • Opposed-piston technology for faster feed and switching to high-pressure • Automatic cycle to correct compression pressure • No-spill fast couplings • Aerated temperature control • LED display with warnings and indicators • Error message regarding pressure, temperature, compression sequence, battery • Easy-to-use control dial for functions • Stores all crimping and cutting cycles in the internal memory • USB port for transferring stored data to PC Flow: 1.1 lit/min switches at 100 bar to 0.1 lit/min Pressure: 700 bar Battery: Li-lon 18 V, 3.0 Ah Weight: Only 4.6 kg with battery
SAB no
Model
Capacity
83271000 E1661131
E no
CP700 Hydraulic pump
18V, 3.0 Ah Li 630 Bar
Weight, kg 4.6 kg
83271001 E1661132
CP700 Hydraulic pump
18V, 3.0 Ah Li 700 Bar
4.6 kg
83271050
Battery for CP700
18V – 3.0 Ah Li
0.5 kg
83271100
Adapter 230V for CP700
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
0.8 kg
11
Cutting and crimping heads PS-85 Cutter head
Lightweight and compact cutter head for Al and Cu cable, designed for use with our 700 bar hydraulic pumps. • Lockable cover with blade guide • Hydraulic fast coupling with guard Capacity: max 85 mm diameter Pressure: 70 kN Pressure: 700 bar
SAB no
E no
83272200
Model
Weight, kg
PS-85 Cutter head
5.3 kg
PS-95 Cutter head
Light and compact cutter head for Al and Cu cable, designed for use with our 700 bar hydraulic pumps. Capacity: max 95 mm diameter Pressure: 100 kN Pressure: 700 bar
SAB no
E no
83272400
Model
Weight, kg
PS-95 Cutter head
9.4 kg
PS-120 Cutter head
Light and compact cutter head for Al and Cu cable (with steel reinforcement), designed for use with our 700 bar hydraulic pumps. • Lockable cover with blade guide • Hydraulic fast coupling with guard Capacity: max 120 mm diameter Pressure: 100 kN Pressure: 700 bar
SAB no
E no
83272500
Model
Weight, kg
PS-120 Cutter head
10.6 kg
Crimper head type III
Crimping head for DIN crimping with type III dies, designed for our 700 bar hydraulic pumps. Capacity: max 95 mm diameter Pressure: 240 kN Pressure: 850 bar
SAB no
E no
83272600
12
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
Model
Weight, kg
Type III DIN
4.8 kg
Crimping tool and dies Crimp tool EV130
• Ergonomic design for good balance and easy handling • Piston pressure 130 kN • Power 200 W • Stroke, piston: 13 mm • Pivoting crimper head, 180° • Good accessibility between cables and in restricted spaces • One hand operation • Powered by a 14.4 Volt Li.Ion battery • Weight without battery 4.1 kg • Fits the Elpress crim ping dies in system 1300
The KC model contains EV130 + 2x BC1430 + CL1430HC + case. Accessories Charger and batteries for the crimping tool. Same as for the EK55 cutter, (shown on page 11).
Capacity • max 400 mm2 Cu • max. 240 mm2 Al, not pre-shaped • max. 120/120 C sleeves • max. FeAl + AlMgSi 99 mm² • max. ALUS insulating sleeves 95 mm² • Less than 7 seconds per crimping cycle
SAB no 83251000
E no
Model
Weight, kg
E1630625
EV130-KC
11.80 kg
Complete kit
Crimping dies for MJPT sleeves
Crimping dies for Elpress die holder in system 1300 for crimping insulated sleeves for ALUS, type MJPT.
SAB no
E no
Model
Weight, kg
83252004
E0890140
E173 for ALUS 25-50 mm
0.10 kg
83252008
E0890142
E215 for ALUS 95 mm
0.10 kg
2
2
Crimping tool P-HV130
Hand operated hydraulic crimping tool 1300 • Crimping capacit: 400 mm2 Copper • Crimping capacity: 240 mm2 Aluminium • Output Force 125 kN • Supplied with Case Used together with System 1300 crimping dies SAB no 83250700
E no E1661898
Model P-HV130
Weight, kg 5,1 kg
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
13
Crimping tool and Storage containers Crimp tool EDP62
• Ergonomic design for good balance and easy handling • Piston pressure 65 kN (6,500 kg) • Power 200 W • Stroke, piston: 13 mm • Pivoting crimper head, 180° • Good accessibility between cables and in restricted spaces. • One hand operation • Powered by a 14.4 Volt Li.Ion battery • Weight without battery 3.5 kg • Pfister's dies G06-300 can be used directly in the EDP62 head, model G06 dies with adapter • For crimping Elpress and DIN sleeves, you select from our range of crimping dies, 8323S Model –KC, complete kit, containing: EDP62 + 2x BC1430X + CL1430HC + case. Accessories Chargers and batteries for the crimp tool is the same as for Cutter EK55 and can be found on page 11.
Capacity • max 185 mm² Cu • max 150 mm² Cu tensile • max. 240 mm² Al, not pre-shaped • max. 300 mm² Al, pre-shaped • max. 240 mm² Al, not pre-shaped • max. 185 mm² Al 59 cable and BLX • max. 120/20 mm² FeAl cable • Less than 7 seconds per crimping cycle
SAB no 83231000
E no
Model
Weight, kg
E0890031
EDP62-KC
Complete kit
10.90 kg
Storage case X2
Storage case for ED52, EDP62 and EV130. Standard briefcase, type NEFAB, with moulded styrofoam. Room for tool and one battery, charger, extra battery and a small number of crimping dies. Measurements: 570x380x170 mm (LxBxH)
SAB no
E no
8323VÄSKAEDPX2
Model
Weight, kg
X2
5.20 kg
Die range case CP2S
NEFAB case with carrying handle. Water cut slots for a complete die range, 37 dies of type 9323S. Measurements: 450x300x100 mm (LxBxH).
SAB no
E no
8323VÄSKA
Model
Weight, kg
CP2S-EDP
2.70 kg
Tool and die case CP2MS
NEFAB case for complete storage of EDP62, battery, charge, extra battery and 37 pairs of dies. Measurements: 820x420x130 mm (LxBxH).
SAB no 8323VÄSKA HEL
14
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
E no
Model
Weight, kg
CP2MS-EDP
7.30 kg
Crimping dies Crimping dies for EDP62
Crimping dies for crimping both DIN and Elpress sleeves. Manufactured from high-grade hardened steel. The dies are paired together with a steel spring. Markings as per below are stamped on the dies.
Crimping dies for ALUS MJPT sleeves
SAB no
E no
Marking
Max. area
Sleeve type
8323E140
E0890100
E140
25 mm²
MJPT 10-25 / 10-25
8323E173
E0890101
E173
50 mm²
MJPT 10-50 / 10-50
8323E215
E0890102
E215
95 mm²
MJPT 10-95 / 10-95
Marking die
Cu no- strain
SAB no
Crimping dies Cu, DIN
8323SU04E
Crimping dies for aluminium, DIN
8323SU06
SU06 SU07
8323SU08
SU08
8323SU09
SU09
8323SU10
SU10
25
25
8323SU12
SU12
35
35
8323SU14
SU14
50
50
8323SU16
SU16
70
70
8323SU18
SU18
95
8323SU19
SU19
8323SU20
SU20
120
8323SU22
SU22
150
120
8323SU25
SU25
185
150
8323SU28
SU28
240
SA12
Steel sleeve for FeAl
SU04E
8323SU07
SAB no E no Marking on die 8323SA12
Cu tensile strength
10
31 49
16
10-16
62 99
95
rm/sm sm not tensile pre-shaped pre-shaped strength no-strain
AlMgSi tensile strength
Al sleeve on FeAl tensile strength
16-25
16-25 35
31
31 62
8323SA12E
E0890117
SA12E (513)
8323SA14
E0890118
SA14 (515)
35 50
35
50
49
70
50
70
62
8323SA16
E0890119
SA16 (517)
8323SA17
E0890120
SA17 (518E)
8323SA18
E0890121
SA18 (519)
8323SA20
E0890122
SA20 (520)
8323SA22
E0890123
SA22 (516)
95-120 150
99 70-95
95
120
120
8323SA25
E0890124
SA25 (514)
8323SA27
E0890125
SA27
8323SA28
E0890126
SA28
185
8323SA32
E0890127
SA32
240
185
8323SA34
E0890128
SA34
300
240
99
150
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
15
Crimping dies Circular crimping dies
SAB no
E no
Marking
For area mm² aluminium
8323SR095
E0890134
SR095
95 mm²
8323SR150
E0890135
SR150
150 mm²
8323SR240
E0890136
SR240
240 mm²
Crimping dies for FeAl, DIN
SAB no
E no
8323SU08 8323SA16
E0890119
8323SU09 8323SA22
E0890123
Marking
For area, mm²
SU08 (Kp08)
62 mm² steel sleeve
SA16 (Kp16)
62 mm² aluminium sleeve
SU09 (Kp09)
99 mm² steel sleeve
SA22 (Kp22)
99 mm² aluminium sleeve
Crimping dies for Vu, Elpress
SAB no
E no
Marking die
Cu sleeves mm²
8323SU04E
E0890103
SU04E
CUT10
8323SU06E
E0890104
SU06E
10
8323SU07E
E0890105
SU07E
EXEL 10kV
8323SU08E
E0890106
SU08E
16
8323SU10E
E0890108
SU10E
25
8323SU12E
E0890109
SU12E
35
8323SU14E
E0890110
SU14E
50
8323SU16E
E0890111
SU16E
70
8323SU18E
E0890112
SU18E
95
8323SU20E
E0890114
SU20E
120
8323SU22E
E0890115
SU22E
150
8323SU25E
E0890116
SU25E
185
SU28E
240
8323SU28E
Crimping dies for aluminium, Elpress SAB no E no
Marking on die
Sleeves Elpress for mm² rm/sm pre-shaped no-strain
8323SA12E
E0890117
SA12E (513)
25
8323SA17
E0890120
SA17 (518E)
50-70
8323SA25
E0890124
SA25 (514)
95-120-150
8323SA32
E0890127
SA32
185-240
Circular crimping dies
SAB no
16
E no
Marking
For area mm² aluminium
8323SR095
E0890134
R095
95 mm²
8323SR150
E0890135
SR150
150 mm²
8323SR240
E0890136
SR240
240 mm²
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
Crimping dies for FeAl, Elpress Crimping dies for FeAl (BLL) joints with ELPRESS sleeves
SAB no
E no
8323B16NP
Marking
For area mm²
B16NP
62 mm² aluminium sleeve
8323B6FE
B6FE
62 mm² steel sleeve
8323B20NP
B20NP
99 mm² aluminium sleeve
8323B8FE
B8FE
99 mm² steel sleeve
Crimping dies for C clamps
SAB no
E no
Marking
For area mm² Elpress, type C clamp
8323SC04
E0890129 SC4 (509)
10 / 6-10
C4
8323SC05
E0890130 SC5 (511)
10-16 / 10-16
C5
8323SC06
E0890131 SC6 (512)
16-25 / 16-25
C6
8323SC09
E0890132 SC9 (510) 25-35 25-35 35-50 35-50 35-50
8323SC11
E0890133 SC11
8323SC13
SC13
/ 16-25 / 25-35 / 16-25 / 25-35 / 25-50
C8-6 C8 C9-6 C9-8 C9
50-70 / 25-70
C11-8 C11-9 C11
70-95
C13
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
17
Crimping tool/hydraulic pliers Crimping tool EDP52
Versatile crimping tool that crimps all makes of sleeves up to 150 mm². Ergonomically designed with one-hand operation. Powered by Li-Ion 14.4 volt batteries, type BC1430X. • Piston pressure 55 kN (5,500 kg) • Power 200 W • Stroke 13 mm • Swivelling crimping head, 180 grader. • Weight without battery 3.5 kg Capacity • max 95 mm² insulated ALUS sleeves, type MJPT • max 120 mm² Cu • max. 150 mm² Al, not pre-shaped • max. 150 mm² Al, pre-shaped • max. 150 mm² pre-shaped • max 99 mm² Al 59 cable and BLX • max 99/16 mm² FeAl line
Accessories Charger and batteries for the crimping tool are the same as for the EK55 cutter and are shown on page 11.
Model – KC, complete kit contains: ED52, charger CL1430HC, 2 batteries BC1430X and storage case.
SAB no 83221000
E no
Model
Description
Weight, kg
E0890030
ED52-KC
Complete kit
10.9 kg
Hydraulic crimping pliers HVD51
Hand-pumped crimping pliers, using the same head as ED52. • Crimps up to 150 mm² • 55 kN in pressure • 13 mm stroke length Delivered in a carrying case. Can be used with crimping dies from the Elpress system, V500 and T2600 series.
SAB no 83211000
18
E no E0890028
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
Model HVD 51
Weight, kg 2.10 kg
Crimping dies Crimping dies ED52
Manufactured from high-grade hardened steel, electrogalvanized. The dies are reversible, providing two areas per die pair. Markings as per below are stamped on each die.
Crimping dies for ALUS MJPT
SAB no
E no
Marking
Max. area
Sleeve type
83221800
E0890040
E173
25 mm² - 50 mm²
MJPT 10-50 / 10-50
83222000
E0890042
E215
95 mm²
MJPT 10-95 / 10-95
Marking
Cu no-strain
Cu tensile strength
Steel sleeve on FeAl
501 502
10 120
83222400
503 504
16 95
83222600
505 506
25 70
83222800
507 508
35 50
Crimping dies for Cu, DIN
SAB no 83222200
20-31 10-16
62
Crimping dies for aluminium, DIN
SAB no
E no Marking rm/sm sm not tensile AlMgSi Al sleeve no-strain pre-shaped strength tensile on FeAl strength tensile strength 83223600 513 16-25 20 83224200
E0890058
514
150
120
120
515 516
35 95-120
35 95
31
70-95
31 99 49+62
83223400
E0890060
517 518E
50
35
50
49
83223500
E0890066
519 520
70
50
70
62 99
Circular crimping dies
SAB no 83224600 83224700 83224800
E no
Marking
For area mm² aluminium
E0890062
D5 MR95
95 mm²
D5 MR120 D5 MR150
120 mm² 150 mm²
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
19
Crimping dies Crimping dies FeAl, DIN
SAB no
E no
Marking
For Fe Al cable mm² and sleeve
83225500
E0890070
521 Fe62
62 mm² Aluminium sleeve 62 mm² Steel sleeve
83225600
E0890072
522 Fe99
99 mm² Aluminium sleeve 99 mm² Steel sleeve
Crimping dies for Cu, Elpress
SAB no
For Cu sleeves, mm² Marking
E no
For area mm²
83222100
E0890043
499E 500E
EXCEL 10 CUT 10
83222200E
E0890044
501E 502E
10 120
83222400E
E0890046
503E 504E
16 95
83222600E
E0890048
505E 506E
25 70
83222800E
E0890050
507E 508E
35 50
Crimping dies for aluminium, ELPRESS
SAB no
E no
Marking
For area mm² rm/sm pre-shaped no-strain
83223600E
E0890056
513E 514E
25 95-120-150
83223400
E0890060
517 518E
50-70
Circular crimping dies
SAB no
E no
Marking
For area mm² aluminium
83224600
E0890062
D5 MR95
95 mm²
83224800
E0890064
D5 MR150
150 mm²
Crimping dies for C clamps
SAB no
E no
Marking
For area mm²
Elpress, type C clamp
509
10 / 6-10
C4 C8-6 C8 C9-6 C9-8 C9
83223000
E0890052
510
25-35 / 16-25 25-35 / 25-35 35-50 / 16-25 35-50 / 25-35 35-50 / 25-50
83223200
E0890054
511
10-16 / 10-16
C5
512
16-25 / 16-25
C6
Crimping dies for FeAl, Elpress
SAB no
Marking
For Fe Al cable mm² and sleeve
83225500E
B16NP B6FE
62 mm² Aluminium sleeve, LFEAL62 62 mm² Steel sleeve, LFEAL62
83225600E
B20NP B8FE
99 mm² Aluminium sleeve, LEFAL99 99 mm² Steel sleeve, LFEAL99
20
E no
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
Strippers Stripper knife for outer casing
• For PE-jacketed cable > 20 mm diameter • Depth of cut 0.5-5 mm • Both lengthwise and lateral stripping • Jointed between pump handle and blade
SAB no
E no
Model
Weight, kg
12210100
E1620350
12002
0.30 kg
12210110
E1620351
Spare blade
12210112
Blade holder
Stripper kit for outer jacket
• Strips with slitting knife both lengthwise and lateral • Sharp jaws for opening the jacket • For an outer diameter of 16 – 52 mm
SAB no
E no
12212800
Capacity
Weight, kg
Ø 16 & 52 mm
2.00 kg
INT Stripper tool for vulcanised semi-conductive layer
• Strips the vulcanized semi-conductive layer up to a thickness of 1.2 mm. • Handles diameters of 10-50 mm, 12 kV=800 mm², 24 kV=630 mm², 36 kV=500 mm². • The blade can be adjusted between 0.1 and 1.2 mm in 0.1 mm increments. • The stripper tool is automatically fed forward along the cable when it rotates. The tool can also rotated in place for a straight finished edge. • The tool can be opened and attached to the cable from the side. • Replaceable blades
SAB no
E no
Model
Weight, kg
12212000 E1620352 INT BZ, kit with stripper, silicone paste and case 0.80 kg 12212002 E1620354 Spare blade
0.20 kg
12212004 E1620355 Silicone paste, tube
0.10 kg
Conduit saw SRS6, conduit saw from Makita
SRS 6 is a new precision instrument from Makita. The conduit saw is used for cutting cable conduits with a diameter of 32-150 mm and a wall thickness of up to 6 mm. SRS 6 cuts the conduit both laterally and longitudinally. It also enables easy cutting of grooves in the conduit. Product no
Model
54507900
Makita conduit saw, 32-150 mm
54507905
Guiding plate 32 mm conduit for SRS 6 Makita REP 32
54507910
Guiding plate 40 mm conduit for SRS 6 Makita REP 40
54507915
Guiding plate 50 mm conduit for SRS 6 Makita REP 50
54507920
Guiding plate 63 mm conduit for SRS 6 Makita REP 63
54507925
Guiding plate 64-150 mm conduit for SRS 6 Makita REP 64+
54507930
Cutting blade ESB 6 for SRS 6
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
21
Strippers Stripper tool IMS2
IMS2 is a variable adjustment tool for stripping PEX insulation from 10-45 kV cables. The tool cuts through the PEX insulation completely through in a spiral. One blade runs along the conductor in order not to damage it and to lift the PEX layer. The blade can be set to five different angles depending on how steep an ascent you need on the sprial. TO achieve a straight edge, the blade is set in its start position and rotated for the last cut. • Diameter 15-52 mm • Depth of cut 0-15 mm SAB no E no Model Weight, kg 12212100
E1620501
12212110
IMS
1.0 kg
Spare blade
0.02 kg
T handle for coring stripper sleeve PEX
• Twist grip for use with PEX coring stripper sleeves • Adjustable in length • Length 175 mm
SAB no 12212500
Coring stripper sleeve for PEX
• Replaceable blades • Bayonet mount for T handle • Standard for 20 kV cable • With guide sleeve for 10 kV cable
SAB no 12212600
E no
Model
Weight, kg
E1620356
125200
0.30 kg
E no E1620502
20 kV
0.05 kg
20 kV
0.05 kg
50
20 kV
0.05 kg
70
20 kV
0.05 kg
E1620358
95
20 kV
0.05 kg
120
20 kV
0.05 kg
E1620359
150
20 kV
0.05 kg
185
20 kV
0.05 kg
20 kV
0.05 kg
E1620357
12212610 12212612
Weight, kg
25
12212606 12212608
Cable
35
12212602 12212604
Area mm²
12212614 12212616
E1620360
240
12212620
E1620361
Spare blades, all sizes
Guide sleeves for 10 kV cable
SAB no
Area mm² Cable
Weight, kg
12212601
25
10 kV
0.02 kg
12212603
Grey coring stripper sleeve 10 kV 35
10 kV
0.02 kg
12212605
50
10 kV
0.02 kg
12212607
70
10 kV
0.02 kg
12212609
95
10 kV
0.02 kg
12212611
Grey coring stripper sleeve 10 kV 120
10 kV
0.02 kg
12212613
150
10 kV
0.02 kg
12212615
Grey coring stripper sleeve 10 kV 185
10 kV
0.02 kg
12212617
240
10 kV
0.02 kg
Stripper tool for semi-conductors and PEX 35-90 mm diameter IT-1000-013 lathes semi-conductors and PEX with an outer diameter of 35-90 mm. The tool is variable with interchangeable blades.
SAB no
22
E no
Description Weight, kg
12212200
IT-1000-013
0.40 kg
12212210
Spare blade semi-conductor
0.02 kg
12212220
Spare blade PEX
0.02 kg
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
Stripper kit Stripper kit PEX for 10-20 kV
Stripper kit with T handle and four coring stripper sleeves for PEX insulation, delivered in a plastic case with moulded slots for each tool. The T handle is adjustable in length. Contents: • T handle • Coring stripper sleeve, PEX 20 kV 50 mm² • Coring stripper sleeve, PEX 20 kV 95 mm² • Coring stripper sleeve, PEX 20 kV 150 mm² • Coring stripper sleeve, PEX 20 kV 240 mm² • Guide sleeves for 10 kV cable of the above sizes • Storage case
SAB no 12212730
E no
Weight, kg
E1620366
2.00 kg
Stripper kit IMS2 + INT + outer jacket
Kit with stripper tool IMS52 for stripping PEX insulation from 10-45 kV cables. INT for stripping semi-conductive layer 10-50 mm and stripping tool for outer jacket PE-jacketed cable > 20 mm diameter.
SAB no 12212770
E no
Contents
Weight, kg
IMS2 + INT + Outer jacket
0.62 kg
Stripper kit FIX for 10-20 kV
Stripper kit with T handle and four coring stripper sleeves for PEX insulation, delivered in a plastic case with moulded slots for each tool. The T handle is adjustable in length. The kit also includes strippers for vulcanized semi-conductive layers and a tool for stripping the outer jacket. Contents: • Jacket stripper • Stripper tool, INT-BZ, for vulcanised semi-conductive layer • Silicone paste • T handle • Coring stripper sleeve, PEX 20 kV 50 mm² • Coring stripper sleeve, PEX 20 kV 95 mm² • Coring stripper sleeve, PEX 20 kV 150 mm² • Coring stripper sleeve, PEX 20 kV 240 mm² • Guide sleeves for 10 kV cable of the above sizes • Storage case
SAB no 12212720
E no
Weight, kg
E1620365
2.00 kg
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
23
Stripper tools, drilling tools Stripper tool FK28
Easy-to-manoeuvre stripper tool that cuts both lengthwise and around the cable, thanks to the rotating knife. • Adjustable depth of cut • For power cable, telecom cable and optical cable
SAB no
E no
Model
Measurements Weight, kg
12211200
E1620128
FK28
Ø 6-28 mm
12211210
E1620129
Spare blade
0.05 kg
Stripper tool BLL
Recommended for BLL cable, type AMO Kraft. The tool strips the insulation in a spiral and is self-feeding. The blade is adjustable and lifts the insulation without damaging the conductor.
SAB no 12210000
E no
Model
Measurements Weight, kg
E1620558
NP400
Ø 6-30 mm
12210013
0.15 kg
Spare blade
Petrol engine drill TED262
Petrol powered drill for all situations • Speed chuck 2-13 mm, ½” • 1.4 hp two-stroke • Drill speed, 250-325 rpm • Tank volume 0.60 litres • Around 50 minutes of run time
SAB no
E no
Model
Weight, kg
13135000
E1651610
TED262
4.0 kg
13135100
E1651612
Case
3.6 kg
Drill bits
Self-feeding twist drill in high-quality steel.
SAB no
24
E no
Diameter
13137200
E1651620
16
290
0.12 kg
13137400
E1651622
19
330
0.15 kg
13138700
E1651624
21
330
0.15 kg
13137600
E1651626
22
330
0.18 kg
13137800
E1651628
25
330
0.22 kg
13138400
E1651632
19
500
0.30 kg
13138600
E1651634
22
460
0.33 kg
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
Length, mm
Weight, kg
Drill/screwdriver Percussion drill/Screwdriver 18V DCD985M2 XRP XR 4.0Ah • The latest generation XRP with new 4.0 Ah XR battery technology • Three-speed gearbox in metal for longer run time and life. • 22 torque settings for perfect control • 13 mm speed-chuck with automatic spindle lock for quick bit changes. • Intelligent switch provides total control • White LED with delay for better visibility and torch function • Improved grip design provides greater control and maximum comfort • Steel belt clip and strong magnetic bit holder • Multi-charger for use with 18, 14.4 and 10.8 V XR Li-Ion slidepack batteries • Part of the intelligent XR lithium ion series, designed for efficiency and speed
Standard equipment: • Pivotable side handle • multi-charger • 2 slidepack batteries • Storage case
SAB no
E no
Model
13130060
Description Percussion drill/screwdriver, 18V
Drill/Screwdriver 18V DCD780M2 XRP XR 4.0Ah
• The latest generation 18V XR drill/screwdriver with new 4.0 Ah XR- battery technology • Compact light-weight design for use in restricted spaces • Two-speed transmission in metal for long run time and life • 14 torque settings for perfect screw driving precision • Intelligent switch provides total control • 13 mm one-ring speed chuck with spindle lock for quick and easy one-handed bit changes • White LED with delay for better visibility and torch function • Improved ergonomic design and rubber grip for greater comfort • Li-Ion slidepack battery for easy assembly and disassembly • Multi-charger for use with 18, 14.4 and 10.8 V XR Li-Ion slidepack batteries • Steel belt clip and strong magnetic bit holder • Part of the intelligent XR lithium ion series, designed for efficiency and speed Standard equipment: Multi-charger • 2 slidepack batteries • Storage case
SAB no
E no
Model
13130070
Description Drill/screwdriver
Impact wrench 18V DCF880M2 XR 4,0Ah
• The latest generation impact wrench with new 4.0 Ah XR battery technology • Compact light-weight design for use in restricted spaces • Improved ergonomic design and rubber grip for greater comfort and control • Metal gearbox for efficient power transmission and long life • Front casing in aluminium provides better thermal dissipation and increases the life of the motor • Intelligent switch provides total control • 1/2” (12.7 mm) square mount • White LED with delay • Steel belt clip and strong magnetic bit holder • Multi-charger for use with 18, 14.4 and 10.8 V XR Li-Ion slidepack batteries • Part of the intelligent XR lithium ion series, designed for efficiency and speed Standard equipment: • Multi-charger • 2 slidepack batteries • Storage case
SAB no 13130080
E no
Model
Description Impact wrench
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
25
Batteries, chargers Battery Dewalt DCB182 Slide 18V, 4,0Ah XR
• DEWALT XR 4.0 Ah Li-Ion battery technology for longer run time and optimum strength for finishing applications quickly • LED charging indicator • Light-weight design gives the user 4.0 Ah at the same weight and size as an 18 V 3.0 Ah battery • No memory effect and almost no self-discharging, for maximum productivity and shorter charging time • Compatible with all DEWALT XR Li-Ion 18 V tools • Excellent electrical characteristics • No memory effect
SAB no
E no
Model
13130090
Charger Dewalt DCB105 10,8-18V, 4,0Ah XR
• Charges 10.8/14.4/18 V XR Li-Ion slidepack batteries • Charges one 1.5 Ah battery in 30 minutes • DEWALT's Two-stage charging system • Diagnostics with LED indicator shows battery charging level: charged, charging, current problems and battery too hot or too cold. • Intelligent charger that adapts the charging to the battery type to improve battery life
SAB no
E no
Model
13130100
Car charger Dewalt DCB119 10,8-18V, 4,0Ah XR
• Charges XR Li-Ion slidepack batteries with voltages 10.8, 14.4 and 18 V • Charges a 3.0 Ah battery in 90 minutes • DEWALT's two-stage charging system • LED indicator shows charging status: charged, charging, current problem and battery too hot or too cold. • Intelligent charger varies the charging depending on battery type
SAB no 13130110
26
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
E no
Model
Heating tools, lighting Siever Matic LPG torches
Complete kit packaged in a wooden case Fits P bottles, connecting to C bottles requires a regulating valve and adapter. The kit comprises: Handle with pietzo ignition, large soft flame burner and hot air burner with bayonet coupling, 4 metre hose, regulating valve.
SAB no
Description
Weight, kg
91001000
E no
Siever Matic complete heating kit
3.80 kg
91001010
Handle with Piezo ignition
91001015
Hot air burner 3334P, 38 mm
91001020
Soft flame burner 3341P, 38 mm
91001025
Soft flame burner 3348P, 50 mm
91001030
Spare hose 4m
Hot Air Tool E4500
Convenient hot air tool for shrink-on tubing and end caps.
SAB no
E no
Model
Capacity
Weight, kg
91000300
Hot air tool E4500
400-700° Celcius
1.2 kg
91000310
Gas cartridge for E4500
Line flashlight HARDCASE PRO
Super-strong white LED flashlight, providing full inspection lighting up to 160 metres with shatter-proof lens. Hardcase Pro is durable and tolerates falls of up to five metres. 50,000 hour life using LED and five hours of operation per charge, using the rechargeable NiHM battery. Capacity 500 lumen. Hardcase Pro is delivered with: • 12 Volt car charger • 220 Volt charger • Shoulder strap
SAB no 727512025
E no
Model
Weight, kg
E9451355
Hardcase Pro Spotlight
0.80 kg
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
27
Lighting Headlamp PIXA 3
The PIXA series is designed for professionals that regularly work in darkness. The lamp is robust, durable and easy-to-use, for comfortable work at close range. Easy to use even if you are wearing safety gloves. PIXA is ATEX certified and waterproof to one metre. PIXA uses digitally regulated light, the LEDs shine with full effect throughout their entire burning time. Range is 55 metres and burning time is three hours. The headlamp automatically switches to energy-saving mode when the batteries need charging, which means 15 metre range for up to 10 hours. The lamp can be angled at 180 degrees to protect the lens.
SAB no 72E78
E no
Model
Weight, g
E9451477
Headlamp PIXA 3
160 g
Petzl NAO+ headlamp
Rechargeable headlamp with self-adjusting light, so-called REACTIVE LIGHTING technology. The luminous flux and the power from the two super diodes automatically adapts to the user's light requirements as the brightness adapts to the amount of light that hits the built-in sensor.
Specifications Luminous flux: 7-750 Lumen Light source: 2 LEDs Reach: 10m-140 m: Burning time: 12 h 30 min-6 h 30 min IP rating: IP X4
28
• Tailored and comfortable light that does not dazzle • Maximum “hands-free” time • Increased life through optimised use of the energy source • Tailored performance with OS by Petzl
SAB no
E no
72E36AHR
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
Model
Weight, g
Petzl headlamp NAO+
185 g
Clearing tools, Telescopic rod Felling guide Stapeln 29
Mechanical directional felling guide with safety lock. Disc-clutch with friction element stops it from reversing. 25 to1 transmission ratio. Collapsible.
SAB no
E no
38340500
Length
Weight, kg
1850 mm
14.5 kg
Telescopic rod BMT-S
Telescopic rod made from reinforced fibreglass pipes. The upper part is filled with foam in accordance with IEC 60855. The length of each section can be adjusted as required by means of lock rings. Adapter for K mount (type for voltage tester) included when purchasing rod with a 3/4” UNC mount. It is intended as a pole saw and can also be used to control the voltage in the selected area. When in use, the upper section should always be fully extended. The rod is manufactured in accordance with standard EN62193. Care instructions: Be careful with the upper section, which is insulated.
SAB no Description
Tool mount
Length
Quantity sections
Weight, kg
12517550
Telescopic rod BMTS / Pole saw
Thread mount UNC 3/4”
8.75 m
5
5.2 kg
12517560
Telescopic rod BMTS / Pole saw
Universal K mount
8.75 m
5
5.2 kg
12517750
Telescopic rod BMTS / Pole saw
Thread mount UNC 3/4”
12 m
6
7.25 kg
12517760
Telescopic rod BMTS / Pole saw
Universal K mount
12 m
6
7.25 kg
12517850
Telescopic rod BMTS / Pole saw
Thread mount UNC 3/4”
6m
4
3.4 kg
12517860
Telescopic rod BMTS / Pole saw
Universal K mount
6m
4
3.4 kg
K mount with UNC 3/4” thread Suitable for Telescopic rod BMT-S.
SAB no 12517417
E no
Model
Weight, kg
K mount with UNC 3/4” thread
0.2
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
29
Pole saw, Metering equipment Pole saw Samurai
The Samurai saw's teeth are designed to retract in order to facilitate lopping. Cutting knife and holster included in the kit. Product number 12517100.
SAB no
E no
Type
Weight, kg
12517100
E1652858
Saw blade with mount
0.20 kg
12517200
E1652857
Saw blade Samurai
0.10 kg
12517300
Chopping knife
Tape measure
Tape measure made from fibreglass and marked on both sides. Handle and casing in hard plastic.
SAB no
E no
Length
Weight, kg
21538200
E1635172
30 m
0.5 kg
21538400
E1635174
50 m
0.8 kg
Range finder Nikon Forestry 550 Pro
Forestry Pro is an updated model of the range finder Forestry 550. This award-winning and popular range finder for the forestry industry, now comes equipped with triangulation, eagerly awaited by the market. This new features enables you to measure the height of a tree, even if its top or base is hidden from view by branches or bushes, making it impossible to use traditional separation metering since it requires the laser to reach those points. Three-point metering: The height of the tree is calculated based on the horizontal distance and the angle to the tree top and the base. The ease of use makes it easy to measure actual distance, horizontal distance and height. The system for target priority switching has two metering modes: • The priority mode for distant objects show the distance to the object in question among several results from one single measurement. • Priority mode for the first object shows the distance to the nearest object among several results from one single measurement. The results are shown on both internal and external LCD screens. The external screen shows all results simultaneously. A high quality monocular viewfinder with 6x magnification and multi-layered coating for a bright image. The high viewing position makes the image clear for people wearing glasses. Is able to measure the distance to different objects in quick succession for up to 20 seconds when the button is pressed. Waterproof (up to one metre for ten minutes), but not intended for underwater use. The battery compartment is water repellent.
SAB no
E no
61601200
30
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
Designation Metering range 10 - 500 m /33 - 999 feet.
Weight, kg 0.21 kg
Other tools Terminal cabinet multi-key
Key with four functions: Fibreoptic and cable TV, EBR lock, triangular lock, bayonet lock.
SAB no 10003000
E no
Model
Weight, kg
E1646567
KSN KOMBI 4
0.10 kg
E no
Length
Weight, kg
E1624152
320 mm
0.80 kg
E no
Length
Weight, kg
E1622649
490 mm
0.90 kg
Length
Weight, kg
430 mm
0.80 kg
Length
Weight, kg
390 mm
1.00 kg
Line hammer Steel
Rock hammer with steel shaft.
SAB no 13128100
Hook key, round
SAB no 13129000
Hook key, straight
SAB no
E no
13129500
Staple puller Steel crowbar.
SAB no
E no
13128200
Bag for range poles
PVC quiver with foam-reinforced bottom and padded shoulder strap. Holds around 30 range poles. Pocket for markings and hammer.
SAB no 71-2101
E no
Length
Weight, kg
E1635876
1,000 mm
0.50 kg
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
31
Cleaning Cleaning PF
An eco-friendly, alkaline and hygienic detergent for cable and tools in connection with preparing and joining. PF is delivered in soaked rags, bottles and flat packs.
SAB no
E no
Type
Volume
Weight, kg
54509110
E1693058
PFWWB250
Bucket with 250 cloths
6.0 kg
54509115
E1693059
54509112
32
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
PF1
one-litre bottle
PF flat pack
Bucket with 24 cloths
Notes
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
33
Notes
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
35
SAB Elteknik offers a complete range of products for electricians. Whether you work with fibreoptics or power cables – we provide materials. tools, instruments, machines, implements and safety equipment that help you in your work. Would you like advice or cannot find what you are looking for? Contact us, our job is to guide you to the right equipment.
SAB Elteknik AB, Överlida Mjöbäcksvägen 2 512 60 Överlida, Sweden Phone +46 651-760 790 Fax +46 651-156 79 SAB Elteknik AB, Ljusdal Plåtslagargatan 27 827 35 Ljusdal, Sweden Phone +46 651-760 790 Fax +46 651-156 79
[email protected] www.sabp.se 36
SAB ELTEKNIK AB • PHONE +46 651-760 790 •
[email protected] • WWW.SABP.SE
