Håndbeskyttelse - Th. Geyer

Transcript

Labortops 4/2014 LABORTOPS Gældende til 31. december 2014 Nitrilhandsker Håndbeskyttelse 2-3 Mikroskopi Minipumpe til opløsningsmidler 5 pH-papir Sikkerhedsbriller 5 Buffere og standarder 6 pH-metre Filterpapir Ekstraktionshætter Vakuum måleudstyr Membranpumper Kryorør og etiketter Sikkerhedsbunsenbrænder Bloktermostater Pipetter 6 Magnetomrørere 7 Omrørere 7 Køleskabe 8 Kølebade 9 Prøveudtagere 9 Prøveflasker Reagens reservoirs 10 Målekolber og målecylindre 10 Forbrugsartikler Objektglas 11 Lommetermometer 11 12 12 13 14 14 15 15 16 16 17 18-19 20 Nitrilhandsker LLG-Gloves Nitrile Chemical resistance The LLG Protective gloves Nitrile for single use have been tested in accordance with EN 374-3 “Determination on resistance to permeation by chemicals” Chemicals (Synonyms) Acetic acid (10%) (Methyl carbon acid) Acetone (2-Propanone) Acetonitrile (Cyanomethane, Ethyl nitrile) Acryl amide (40 %), (Acrylic acid amide) Ammoniumhydroxid (25 %) Benzalconiumchloride liquid (Quats) Chlorhexidine gluconate in ethanol and water Chloroform (Trichloromethane) Cyclohexanol (Hexalin / at 23°C) Dichloromethane (Methylene chloride, Freon30) Diethyl amine (DEA) Diethyl ether (Diethyloxide, Ethoxyethane) Dimethylsulfoxide (DMSO) Ethanol (20%) (Ethyl alcohol) Ethanol (40%) (Ethyl alcohol) Ethanol (70%) (Ethyl alcohol) Ethanol (80%) (Ethyl alcohol) Ethanol p.a. (Ethyl alcohol) Ethidium bromide (1%) (Homidium bromide) Ethyl acetate (Acetic acid ether) Formaldehyde (37%) with Methanol (10%) (Formalin, Methyl aldehyde) Gasoline (heavy, bp 150 -190 °C) Glutaraldehyde (5%) (Pentane-1,5- dial, Glutaral) Hydrochloric acid (36%) Hydrofluoric acid (40%) Isopropyl alcohol (40%) (2-Propanol, Isopropanol, IPA) Isopropyl alcohol (70%) (2-Propanol, Isopropanol, IPA) Isopropyl alcohol p.a. (2-Propanol, Isopropanol, IPA) Methanol (5%) (Methyl alcohol) Methanol p.a. (Methyl alcohol) n-Heptane n-Hexane Nitric acid (10%) Nitric acid (36%) Nitric acid (50%) Phenol (10%) (Carbolic acid, Benzenol, Hydroxybenzene) Phenol (80%) (Carbolic acid, Benzenol, Hydroxybenzene) Phosphoric acid (30%) (Orthophosphoric acid) Potassium hydroxide (30%) (Caustic potash, lye) Sodium hydroxide (30%) (Caustic soda, Lye, White caustic) Sodium hydroxide (40%) (Caustic soda, Lye, White caustic) Sulphuric acid (96%) (Vitriol) Toluene (Methylbenzol, Toluol, Phenylmethane) Trichlorethane (Methyltrichloromethane) Xylene (Dimethylbenzene, Xylol) LLG-Glove LLG-Glove LLG-Glove ergo standard strong 64-19-7 67-64-1 75-05-8 79-06-1 1336-21-6 63449-41-2 18472-51-0 67-66-3 108-93-0 Level 6 x x Level 6 Level 6 x x Level 6 A x x Level 6 x x Level 3 x Level 4 CAS-Number 75-09-2 x x x 109-89-7 60-29-7 67-68-5 64-17-5 64-17-5 64-17-5 64-17-5 64-17-5 1239-45-8 141-78-6 x x x Level 1 A A A A Level 6 x x x x Level 6 Level 1 Level 1 A A Level 6 A x x X Level 6 Level 1 Level 1 Level 1 50-00-0 Level 1 Level 3 Level 6 8032-32-4 111-30-8 7647-01-0 7664-39-3 67-63-0 67-63-0 67-63-0 67-56-1 67-56-1 142-82-5 110-54-3 7697-37-2 7697-37-2 7697-37-2 108-95-2 108-95-2 7664-38-2 1310-58-3 1310-73-2 1310-73-2 7664-93-9 108-88-3 71-55-6 95-47-6 x Level 6 A x Level 6 Level 2 Level 1 Level 1 A Level 1 Level 1 Level 1 Level 6 A X A Level 6 A A A A Level 6 Level 6 Level 6 Level 6 A x x x x Level 6 Level 3 Level 1 Level 1 Level 1 Level 1 x x A Level 6 Level 6 A A A Level 6 Level 6 Level 6 Level 6 x x x Level 6 A A A A Level 6 Level 4 Level 4 Level 2 Level 2 Level 6 Level 6 Level 6 Level 1 x x x X not recommended A for splash contact recommended – change glove immediately after contact Level 1 for short contact up to 30 min recommended Level 2 for contact up to 60 min recommended Level 3 for contact up to 120 min recommended Level 4 for contact up to 240 min recommended Level 5 for contact up to 480 min recommended Level 6 for contact longer than 480 min recommended Without – no data available Disclaimer: LLG wants to state that the values for the permeation levels for all LLG-Labware gloves are based on tests performed in laboratory under fixed conditions and cannot reflect all actual “in use”-circumstances. As a rule, tests and certificates can only be regarded as general information and will not discharge the user from his duty to make sure, before the first use, that the glove will correspond to his actual protection needs. When working with materials harmful to the skin, before starting to work please always check the glove for any defects. Recommendation on chemical resistance is not part of the specification. If there is any doubt please ask your supplier. 2 Nitrilhandsker For more articles see our Laboratory Catalogue from page 218, 222 onwards LLG handsker, nitril, pudderfri EN 374 EN 374 EN 420 ® L A B W A R E Større sortiment According to EN 420. Suitable for food handling. - Tried and tested quality product made of nitrile - Excellent resistance to skin irritants in foodstuffs - Specially formulated for a more resilient glove - For single use in applications with an increased need for safety when handling chemicals - Free from phthalates/softeners and allergenic latex proteins - Easy to don and particularly skin-friendly through special finishing process - Colour lavender blue - Suitable for areas subject to HACCP standards Cat. III Low Chemical resistant Glove shape: Inside: Size/total length: flat with rolled edge (ambidextrous) powder-free halogenated S, M, L, XL/med. 240mm LLG handsker ergo Thin - comfortable to wear - Thickness (measured in double layer): 0.14mm textured fingers, lavender blue Size S M L XL PK Cat. No. 200 200 200 180 9.006 371 9.006 372 9.006 373 9.006 374 Price DKK 184,50 184,50 184,50 184,50 Price for 1 pack DKK 97,10 97,10 97,10 97,10 Economical pak of 10 DKK 74,60 74,60 74,60 74,60 LLG handsker standard Very comfortable to wear - Thickness (measured in double layer): 0.16mm textured, blue Size S M L XL PK Cat. No. 100 100 100 90 9.006 375 9.006 376 9.006 377 9.006 378 Price DKK 127,50 127,50 127,50 127,50 Price for 1 pack DKK 82,50 82,50 82,50 82,50 Economical pak of 10 DKK 67,10 67,10 67,10 67,10 LLG handsker strong Very sturdy - higher material thickness - Thickness (measured in double layer): 0.26mm textured, blue Size S M L XL PK Cat. No. 100 100 100 90 9.006 379 9.006 380 9.006 381 9.006 382 Price DKK 142,50 142,50 142,50 142,50 Price for 1 pack DKK 94,90 94,90 94,90 94,90 Economical pak of 10 DKK 74,60 74,60 74,60 74,60 LLG dispenser til handsker Dispenser for 3 boxes, with top (left illustr.) or front insert (right illustr.). Material: coated wire Mounting material included. -35% Description front insert top insert Dimensions (W x D x H) mm 160 x 85 x 400 260 x 90 x 400 PK Cat. No. 1 9.405 369 1 9.405 370 Price Now DKK 195,00 174,80 DKK 126,80 113,60 3 Ohhhh-range for your lab Look forward to the info in the inner section. For further information visit www.llg-labware.com Sikkerhed i laboratoriet For more articles see our Laboratory Catalogue from page 86, 186, 249, 990 onwards LLG sprøjteflaske, PE-LD Kanylebøtte Medibox® ® L A B W A R E Containers for easy and safe disposal of all kinds of medical sharp and pointed waste. Medibox® sharps containers comply with international standards. -28% Description PK Cat. No. 1 6.051 172 1 9.264 180 1 9.264 181 Medibox® 0.7l Medibox® 3l Medibox® 5l Price Now DKK 31,50 45,80 62,60 DKK 22,80 33,40 45,40 Minipumpe til opløsningsmidler Manufactured from PE-LD and with the safety label printed on the wash bottle in accordance with regulation (EC) No. 1272/2008 (GHS). - Colour coded cap and bottle for easy and quick recognition of the bottle content - Dispensing tube designed to optimize backflow and turbulence-free operation. - Permanent printing on the body of safety symbols in acc. with GHS, as well as of chemical formula, CAS number, hazard pictogram, signal word, hazard statements and NFPA code. - Chemical name and Warning texts in German, English, French and Spanish -18% Label acetone distilled water ethanol isopropanol methanol Capacity PK Cat. No. ml 500 500 500 500 500 1 1 1 1 1 9.223 504 9.223 505 9.223 506 9.223 507 9.223 508 Price Now DKK 38,30 36,80 38,30 38,30 38,30 DKK 31,50 30,40 31,50 31,50 31,50 LABSOLUTE® sikkerhedsbriller "wave" The self-closing discharge (with auto-stop function) of the Mini solvent pump ensures absolutely precise filling with no dripping at all. Dosing is even easy in very small containers such as test tubes, which present no problems. A hose can optionally be fastened onto the discharge spout (internal Ø 6 mm), thus making it possible to fill the container from a greater distance. The Mini solvent pump is especially compact and very well balanced, which makes it possible to fill without tipping, even from very small containers. Thanks to its sturdy design and high-quality materials, the Mini solvent pump consistently ensures neat and reliable filling throughout its long service life, easily and conveniently. Excellent wearing comfort with innovative technology: - Especially wide viewing angle with all-round eye and eyebrow protection thanks to rimless, angled design. - Slimline arms for comfortable positioning even when wearing hearing protectors and helmets - Metal-free arm locking: especially smooth operation - Openings at the non-slip arm ends for securing a spectacle cord - Ideal for 1-5 l containers - Connecting thread GL 45 - Parts in contact with medium made of PTFE and stainless steel (1.4301, 1.4404) - PTFE hose (6 x 8 mm) 0.4 m - Including grounding cable 2 m - Adapter available as accessory for S 40, GL 38 and GL 32 -19% Description Mini solvent pump, GL 45 Adapter, PTFE for S 40 Adapter, ETFE for GL 38 Adapter, ETFE for GL 32 Flow rate l / min. 1.8 PK Cat. No. 1 1 1 1 9.001 351 9.001 352 9.001 353 9.001 354 A healthy environment for your eyes thanks to an innovative ventilation system: Safe and enjoyable working with the LABSOLUTE® spectacle "wave" that also impress with their modern and stylish design. Price Now DKK 2.617,50 198,80 198,80 198,80 DKK 2.133,40 162,00 162,00 162,00 Rimless lens with special flood coating: - extremely resistant, scratch-proof surface - Non-misting visual field - Simple cleaning thanks to rimless frame Type Spectacle „wave“ PK Cat. No. 1 7.696 003 Price Now DKK 156,40 DKK 104,80 5 Filtrering For more articles see our Laboratory Catalogue from page 682, 689, 691, 1199 onwards Specialpriser! LLG kvantitativt filterpapir, rundfiltre LABSOLUTE® Sprøjtefiltre ® L A B W A R E -25% Slow Diam. mm 70 90 110 125 150 185 Filtration time secs. 180 180 180 180 180 180 PK Cat. No. 100 100 100 100 100 100 7.970 271 9.045 850 6.242 670 9.045 851 9.045 852 6.242 669 Price Now DKK 72,80 104,30 145,50 189,00 250,50 354,00 DKK 54,60 78,40 109,10 141,80 187,90 265,50 -25% Medium fast Diam. mm 55 70 90 110 125 150 185 Filtration time secs. 50 50 50 50 50 50 50 PK Cat. No. 100 100 100 100 100 100 100 6.256 437 7.970 571 7.970 032 6.242 748 7.970 045 6.252 765 6.242 747 Price Now DKK 52,50 63,80 90,80 127,50 159,00 219,00 309,80 DKK 39,40 48,00 68,30 95,60 119,30 164,30 232,50 -25% Fast Diam. mm 70 90 110 125 150 185 Filtration time secs. 10 10 10 10 10 10 PK Cat. No. 100 100 100 100 100 100 9.045 840 9.045 841 9.045 842 9.045 843 9.045 844 9.045 845 Price Now DKK 81,80 110,30 156,00 183,00 250,50 367,50 DKK 61,50 82,90 117,00 137,30 187,90 275,60 LLG ekstraktionshætter, cellulose ® LABSOLUTE® offers a comprehensive range of syringe filters that have been developed especially for the efficient filtration of aqueous and organic solutions for ventilation. The choice of various housing diameters, membrane types and pore sizes offers the ideal solution for your application. All of the filters are subjected to strict quality checks to ensure a consistently high level of quality both of the membrane material and the filter unit as a whole. The advantages for you: - Made without any adhesives: the housing and membrane are welded together - Sterile: 100% sterility thanks to gamma radiation - Equipped with Luer connections - Filters are printed both with the membrane type and pore size: this precludes any confusion of filters, even outside the original packaging L A B W A R E Filter material and diameter -30% Diam. mm 19 20 22 25 26 28 30 33 33 33 33 43 Length mm 90 80 80 100 60 80 80 80 94 100 118 123 PK Cat. No. 25 25 25 25 25 25 25 25 25 25 25 25 9.045 705 9.045 701 9.045 700 9.045 709 9.045 707 9.045 711 9.045 708 9.045 702 9.045 703 9.045 704 9.045 706 9.045 710 Price Now DKK 451,50 617,30 573,80 444,00 428,30 389,30 498,00 444,00 528,80 528,80 630,00 1.116,00 DKK 316,10 432,00 401,60 310,90 300,00 272,60 348,80 310,90 370,10 370,10 441,00 781,10 Holder til ekstraktionshætter -13% Type RIP 4 RIP 6 6 Description for 4 extraction thimbles for 6 extraction thimbles PK Cat. No. 1 9.843 949 1 9.843 950 Price Now DKK 735,00 817,50 DKK 643,10 715,30 CA 13 CA 13 CA 13 CA 13 PTFE 25 PTFE 25 RC 25 RC 25 NY 25 NY 25 PVDF 25 PVDF 25 PES 25 PES 25 CA 25 CA 25 CA 25 CA 25 Pore size Sterile µm 0,22 0,45 0,22 0,45 0,20 0,45 0,20 0,45 0,20 0,45 0,22 0,45 0,22 0,45 0,22 0,45 0,22 0,45 Non-sterile Non-sterile Sterile Sterile Non-sterile Non-sterile Non-sterile Non-sterile Non-sterile Non-sterile Non-sterile Non-sterile Non-sterile Non-sterile Non-sterile Non-sterile Sterile Sterile PK Cat. No. 500 500 50 50 500 500 500 500 500 500 500 500 500 500 500 500 50 50 7.699 800 7.699 801 7.699 802 7.699 803 7.699 810 7.699 811 7.699 812 7.699 813 7.699 814 7.699 815 7.699 816 7.699 817 7.699 818 7.699 819 7.699 820 7.699 821 7.699 822 7.699 823 Price Now DKK 3.967,50 3.967,50 517,50 517,50 4.117,50 4.117,50 4.380,00 4.380,00 4.117,50 4.117,50 4.380,00 4.380,00 4.117,50 4.117,50 4.117,50 4.117,50 517,50 517,50 DKK 2.975,60 2.975,60 388,10 388,10 3.088,10 3.088,10 3.285,00 3.285,00 3.088,10 3.088,10 3.285,00 3.285,00 3.088,10 3.088,10 3.088,10 3.088,10 388,10 388,10 Vakuumteknik For more articles see our Laboratory Catalogue from page 700, 1018, 1035 onwards Membranpumper ME1 og ME1C LLG vakuum måleinstrument DVR2 ® L A B W A R E Nøjagtig måling 9.880 930 Versatile vacuum gauge for vacuum measurement between atmospheric pressure and 1 mbar. With integral, alumina ceramic, pressure transducer providing excellent corrosion resistance and long-term stability. DKD initial delivery calibration (Cat. No. 7.059 540) please order separately. Specifications Measuring range: Measurement principle: Measuring accuracy: Power supply/battery: Dimensions (WxDxH): Weight: Type -16% PK Cat. No. DVR 2 9.880 934 1080 to 1mbar (hPa), 810 to 1 Torr Capacitive; gas type-independent absolute pressure measurement < 1mbar (0.75 Torr) ±1 digit 9V Lithium battery/1.2 Ah Ultralife U9VL 115 x 115 x 66mm 0.40kg 1 9.882 209 Price Now DKK 3.742,50 DKK 3.142,50 LLG inline filtre ® L A B W A R E The 50mm inline filter with its ultra pure Polypropylene housing (ultrasonic welded) is designed to contain 47mm membranes. The filter comes with 6-12mm hose connectors (tapered) at the inlet and the outlet side. The PTFE-membrane can be used for filtration of aggressive chemicals including acids and non-aqueous solutions. Due to its high filter area of 1735mm² the filter is suitable for long term gas filtration/venting applications. It can be used for filtration of higher volumes of liquid (up to approximately 500ml, depending on the particle load of the filtrated suspension) or for filtration of aggressive non aqueous liquids. - hydrophobic PTFE-membrane Housing polypropylene autoclavable at 121°C for 20 minutes at 2 bar, max. 3 cycles stepped hose connector of 6-10 mm on either sides high throughput with low pressure drop max. operating pressure 4.0 bar Diam. mm 50 50 PK Cat. No. 5 9.059 513 5 9.059 514 The diaphragm pumps ME 1 and ME 1C offer a compact and high performance solution. With their easy-to-use functionality, they are perfect partner for both single and multiple filtrations. One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors for modest vacuum requirements. In contrast to water-jet pumps, they do not consume water and therefore do not produce any contaminated waste water in daily use. Vacuum filtration is frequently used for sample preparation in chemistry, microbiology, waste water control and analysis. Aluminum PTFE design Typical applications for the ME 1 are aqueous filtrations. The PTFE diaphragm and valves are rugged and provide high chemical resistance. If aluminum has the required specific resistance, solvent-containing samples can also be filtrated. Chemistry design In the chemistry diaphragm pumps („C”) all major parts in contact with pumped media are made of chemically resistant fluoroplastics. The ME 1C is also often used for solid phase extraction (SPE). An optional manual regulator valve with dial gauge enables variable fine adjustment of the pumping speed and the ultimate vacuum. Specifications Flow rate (50/60 Hz): Ultimate pressure: Dimensions (WxDxH): Weight: Type -30% Pore size µm 0.20 0.45 Special pris! Price Now DKK 224,30 224,30 DKK 157,10 157,10 0.7/0.85m³/hr 100mbar 247 x 121 x 145mm 5kg Connector ME 1 CEE ME 1 CH ME 1 UK ME 1C CEE ME 1C CH ME 1C UK Diaphragm pumps ATEX-models available on request. PK Cat. No. 1 1 1 1 1 1 9.880 930 9.880 931 9.880 932 9.880 934 9.880 935 9.880 936 -16% Price Now DKK 3.900,00 3.900,00 3.900,00 5.175,00 5.175,00 5.175,00 DKK 3.276,00 3.276,00 3.276,00 4.347,00 4.347,00 4.347,00 7 Life Science For more articles see our Laboratory Catalogue from page 27, 31, 155, 746 onwards Etiketter, der tåler kulde, Cryo-Babies®/Cryo-Tags® LABSOLUTE® cryorør No risk of incorrectlypositioned O-rings thanks to integrated sealing surface Sikker mærkning Cryotubes from LABSOLUTE® are designed for the optimised storage and conservation of biological sample materials in the gas phase of liquid nitrogen or in cryogenic freezers. The cryotubes are produced under clean room conditions as defined by ISO 14644-1 Class 7 and US FED STD 209E Class 10.000 from high-quality polypropylene (PP). The screw caps, made from high-density polyethylene (HDPE) with integrated sealing surface, are both innovative and particularly practical. Leaks from the cryotubes are therefore 100% guaranteed not to happen - incorrectly positioned O-rings are a thing of the past. The CE-certified cryotubes are available in various sizes and versions, allowing you to choose between round and flat bases and between inner and outer threads, depending on your needs. The advantages for you: - Certified sterility with beta irradiation - Free from human DNA, RNase, DNase, ATP and pyrogens - Large labelling field - Simple removal and secure storage: supplied in a handy dispenser box with 10 resealable pouches of 50 cryotubes Type Content Outer thread with standing ring Inner thread with standing ring Outer thread with standing ring Inner thread with standing ring Inner thread with round base Outer thread with round base Outer thread with standing ring Inner thread with standing ring Inner thread with round base ml 1,2 1,2 2 2 2 2 5 5 5 PK Cat. No. 500 500 500 500 500 500 500 500 500 7.696 600 7.696 601 7.696 602 7.696 603 7.696 604 7.696 605 7.696 610 7.696 611 7.696 612 Colour: white. Temperature resistant from -196°C to +150°C. All labels withstand freezer temperatures down to -196°C (liquid and vapor phase nitrogen), boiling water baths (100°C), autoclaving and moderate ovens (150°C). Chemically inert labels resist most organic solvents and caustic agents. They adhere to most plastics, glass and metals without cracking, peeling or degrading. Made with a flexible, polyfin label material and acrylic adhesive. This unique combination expands and contracts together with temperature fluctuations resulting in a strong adhesive bond. Convenient dispensing box assists in labeling individual tubes used in small experiments. Easy to write on. PVC labels accept writing from most lab markers including solvent resistant pens. -33% Type Price Now DKK 825,00 825,00 825,00 825,00 825,00 825,00 975,00 975,00 975,00 DKK 742,50 742,50 742,50 742,50 742,50 742,50 877,50 877,50 877,50 Dimensions (W x D) mm Cryo-Babies 24 x 13 Cryo-Babies 33 x 13 Cryo-Tags 38 x 13 Description PK Cat. No. for 0.5ml tubes 1000 9.100 030 for 1.5/2.0ml tubes 1000 9.100 031 for General application 1000 9.100 032 Price Now DKK 625,50 625,50 625,50 DKK 422,20 422,20 422,20 KIM-KAP™ låg til dyrkningskolber, PP LABSOLUTE® Farve kodet låg For the fast and easy identification of your samples: LABSOLUTE® lid inserts are very easy to insert into the screw caps and are used to colour-code your samples. Available in six different colours. -13% Autoclavable. Colour coded. Further colours on request. Colour Blue White Yellow Pink Red Green PK Cat. No. 100 100 100 100 100 100 7.696 613 7.696 614 7.696 615 7.696 616 7.696 617 7.696 618 Price DKK 22,50 22,50 22,50 22,50 22,50 22,50 LABSOLUTE® Reagensglas Fiolax glas Now DKK 16,90 16,90 16,90 16,90 16,90 16,90 For culture tubes outer diam. mm 13 16 16 18 20 natural natural red natural natural PK Cat. No. 1000 1000 1000 1000 500 6.256 899 6.235 364 6.256 904 6.256 900 6.235 365 Price Now DKK 408,80 564,80 505,50 480,00 533,30 DKK 357,80 494,30 442,50 420,00 466,50 LABSOLUTE® tubes are made from special borosilicate glass 4.9. This makes them thin-walled, but relatively impermeable to large changes in temperature and local heating. The rimmed tubes also have good chemical resistance, especially against acids (with the exception of hydrofluoric acid). Size mm 70 x 8 100 x 10 75 x 12 100 x 12 130 x 14 130 x 16 160 x 16 180 x 18 180 x 20 8 Colour PK Cat. No. 100 100 100 100 100 100 100 100 100 7.690 080 7.690 081 7.690 082 7.690 083 7.690 084 7.690 085 7.690 086 7.690 087 7.690 088 Price Now DKK 78,00 106,50 104,30 126,80 152,30 144,80 145,50 159,80 196,50 DKK 62,40 85,20 83,40 101,40 121,80 115,80 116,40 127,80 157,20 Life Science For more articles see our Laboratory Catalogue from page 131, 1279, 1295 onwards Sikkerhedsbunsenbrænder Fuego SCS basic Bloktermostater, QBD serien Suitable for all flame related applications in the laboratory. The low profile body facilitates ergonomic operation; the streamlined design reduces air flow disturbances in a clean room workbench. The Fuego SCS series can be operated with foot pedal or button function. Made of stainless steel, with fireproof controls. - SCS Safety Control System with gas safety cut off: lgnition and flame control, temperature monitor, automatic unit switch off, residual heat display, burner head assembly monitor. - BHC Burner Head Control. - Removable burner head. - Tilt mechanism right/left. - Turbo flame. - Holding device for 3 inoculation loop holders. - Nozzles for natural gas, propane/butane gas. - Approved by DIN-DVGW, approval no. NG2211AS0167. - Warranty: 2 years. For controlled dry heating of test tubes, microplates and Eppendorf tubes in interchangeable aluminium blocks. Choose from three digital systems with 1, 2 or 4 interchangeable blocks With stainless steel foot pedal. The foot pedal regulates the burning time either by continuous foot pressure or by start-stop function. Instrument with ON/OFF button function. Basic model without lR-Sensor and without graphic display. - Fast heat-up time and in-block temperature sensing capability using accessory external sensor probe. Please order Cat. No. 6.228 714 separately. - Built-in timer, programmable delayed start and RS232 output for data monitoring - Requires but does not include interchangeable QB-series blocks Additional accessories are available on request. Special pris! Specifications Dimensions (WxDxH): Power supply: Weight: Specialtilbud Specifications Models QBD1/QBD2/QBD4 Temperature range: Stability at 37°C: Uniformity within the block at 37°C: across similar blocks at 37°C: Supply requirements: -18% PK Cat. No. Fuego SCS basic 1 6.232 207 ±0.1°C ±0.2°C 230V, 50/60Hz, single phase -24% 103 x 130 x 49mm 100-240V 50/60Hz 700g Type 5 to 130°C ±1.0°C Price DKK 2.662,50 Type Blocks accepted Now DKK 2.196,80 QBD1 QBD2 QBD4 1 2 4 Power Length W 150 300 600 mm 200 200 200 Width Height mm 230 280 380 mm 100 100 100 PK Cat. No. 1 9.852 307 1 9.852 308 1 9.852 309 Price Now DKK 6.142,50 6.667,50 8.062,50 DKK 4.668,40 5.067,40 6.127,50 Blokke til QBD serien Podenåle og podenåleholdere Machined aluminium, (L x W x H) 140 x 50 x 63mm. Holes drilled as indicated. Type For tubes diam. No.of holes QB-12 12 mm 24 QB-16 16 mm 12 QB-18 18 mm 12 QB-E1 1.5 ml 24 QB-E2 2.0 ml 24 Further blocks available on request. Inoculation loops made of platinum-iridium wire (90/10). Can be heated to red heat. Length: 60mm. Wire diameter: 0.5mm. Fixed plastic blocks (autoclavable). Accomodate up to 6 inoculation loop holders at any one time. Type P-I 1 P-I 2 P-I 3 P-I 5 Inoculation loop stands Inoculation loop stands Description Loop diam. mm 1 2 3 5 Platinum-iridium Platinum-iridium Platinum-iridium Platinum-iridium (Dia. x H) 80 x 50mm (L x W x H) 180 x 50 x 50mm PK Cat. No. 1 1 1 1 1 1 9.520 180 9.520 181 9.520 182 9.520 184 9.520 190 9.520 191 PK Cat. No. 1 1 1 1 1 9.951 662 9.951 663 9.951 664 9.951 668 9.951 669 -24% Price Now DKK 810,00 742,50 810,00 810,00 810,00 DKK 615,80 564,40 615,80 615,80 615,80 Låg til QBD serien -5% Price Now DKK 300,00 300,00 300,00 300,00 322,50 360,00 DKK 285,00 285,00 285,00 285,00 306,40 342,00 Transparent polycarbonate. Protect the operator against accidentally touching blocks whilst hot or against contamination of samples from splashes. -24% Type Description QBL1 QBL4 QBL2 Cover for QBD1 Cover for QBD4 Cover for QBD2 PK Cat. No. 1 9.852 311 1 9.852 312 1 9.852 314 Price Now DKK 840,00 997,50 922,50 DKK 638,30 758,30 701,30 9 Væskehåndtering For more articles see our Laboratory Catalogue from page 908, 936, 952 onwards LABSOLUTE® mikropipetter Maximum quality at a superb price: Ergonomical & lightweight: Our new range of micro pipettes offers models of various volumes with one, eight and twelve channels. The advantages for you - Double volume adjustment by turning the push button or using the thumb wheel - The height of the drop can be adapted to all available pipette tips - UV resistant - Stable shaft: particularly durable - Customisation: seven different coloured rings are included in the packaging - Easy-to-read volume display - Completely autoclave-compatible: 120 °C / 20 min. / 1000 kPa enkelt kanals Volume range PK Cat. No. µl 0,1 - 2,0 0,5 -10 2 - 20 10 -100 20 - 200 100 - 1000 500 - 5000 1000 - 10000 Price Now DKK 1.275,00 1.275,00 1.275,00 1.275,00 1.275,00 1.275,00 1.275,00 1.275,00 DKK 892,50 892,50 892,50 892,50 892,50 892,50 892,50 892,50 Price Now DKK 1 7.695 710 3.150,00 1 7.695 711 3.150,00 1 7.695 712 3.150,00 DKK 2.205,00 2.205,00 2.205,00 1 1 1 1 1 1 1 1 7.695 700 7.695 701 7.695 702 7.695 703 7.695 704 7.695 705 7.695 706 7.695 707 8 kanals Volume range PK Cat. No. µl 5 - 50 20 - 200 50 - 300 12 kanals Volume range PK Cat. No. µl 5 - 50 20 - 200 50 - 300 ® L A B W A R E Price Now DKK 1 7.695 713 3.450,00 1 7.695 714 3.450,00 1 7.695 715 3.450,00 DKK 2.415,00 2.415,00 2.415,00 LLG reagensreservoir, med synlige volumenmærkeringer - Consisting of transparent disposable inserts and a reusable base - Easy to read the volume label - Drop-free return of the liquid to the original container due to spout on every corner - Inserts stackable to save space Delivery: 4 packs of 50 pcs., sterile wrapped, 1 base per case. Praktisk! -28% Capacity ml 25 100 10 PK Cat. No. 200 9.409 731 200 9.409 732 Price Now DKK 735,00 735,00 DKK 532,90 496,10 Innovation at an attractive price Our NEW broad range of Instruments! Th. Geyer Danmark ApS Tel.: +45 4630 0030 Fax: +45 4630 0069 www.thgeyer.dk 3-Year Warranty on all current and f uniSTIRRER 3 uniSTIRRER 1 Very thin! An ultra-flat inductive magnetic stirrer without heating. The modern magnet coil technology consists only of nonmoving parts and therefore guarantees a wear-free drive. For a better mixing of samples it is possible to change the direction of rotation every 30 seconds. - 100% wear- and maintenance-free inductive drive - LED-display for an exact adjustment of the rotation speed - Digital regulated rotation speed - Alteration of the stirring direction - High protection class IP 65 - Stainless steel surface Delivery includes: magnetic stirrer, power cable, adapters for UK and US. Specifications Stirring quantity (H2O): 800ml Speed range: 15 to 1500rpm Magnetic bar: max. 25mm Display: LED Heating plate: 94mm diam./ Stainless steel Dimensions (WxDxH): 121 x 165 x 12mm Weight: 0.5kg Operating temperature range: 5 bis 40°C Power supply: 100 - 230 V Protection class: IP 65 Type uniSTIRRER 1 PK 1 Art. - Nr. 6.263 420 Economic package with good performance! Low-priced magnetic stirrer with all essential functions and equipment features. A LED display to control all parameters, an integrated temperature control as well as an enclosed design (IP42) are integrated features. The included PT-1000 sensor ensures an exact temperature control. A stand rod with a sensor holder is supplied with this instrument. The integrated HOT-sign warns the user of a hot plate even if the device is switched off. - LED display to set the exact rotation speed and the temperature - Digital controlled rotation speed and temperature - ‚HOT‘ warning sign, even if the device is switched off - Sensor PT-1000 is included - Integrated temperature control - Stand rod and sensor holder is supplied Delivery includes: magnetic stirrer with PT1000, stand rod and fixing material. Specifications Price (DKK) 892,50 Stirring quantity (H2O): 3L Speed range: 100 to 1500rpm Magnetic bar: max. 50mm Display accuracy: 10rpm Display: LED Heating plate: 135mm diam./Stainless steel Temperature range: RT to +280°C Operating temperature range: +5 to +40°C Setting accuracy: 1°C Control accuracy: ±2°C Heat output: 500W Safety temperature: 320°C Dimensions (WxDxH): 155 x 215 x 100mm Weight: 1.5kg Power supply: 200-240V Protection class: IP42 Type uniSTIRRER 3 with EU plug uniSTIRRER 3 with UK plug PK Art. - Nr. 1 6.263 410 1 6.263 411 Price (DKK) 1.717,50 1.717,50 d future Instruments of the uni-Serie uniCFUGE 2 uniCFUGE 3 Mini centrifuge - maximum speed! Stepless adjustable! A compact and reasonably priced mini centrifuge with an universal rotor for 6x 1.5/2.0 ml, 6x 0.5 ml tubes or 2 times 8x 0.2 ml PCR-stripes. Speed can be adjusted to 4000 rpm or 6000 rpm. Powerful motor for fast starting. Quick stop when the lid is opened. A compact and reasonably priced mini centrifuge with brushless and non-wearing high-efficiency motor. Stepless speed adjustment from 0 to 6000rpm. Microprocessor controlled regulation for load-independent accuracy and integrated imbalance control. Integrated timer (0-25 minutes) and high speed- constancy for reproducible results. Quick stop when the lid is opened. 2 flow-optimised rotors for 8 x 1.5/2ml and 8 x 0.2ml vessels included. Adapter for 8 x 0.2/0.4/0.5 ml vessels also included. Supplied with suction feet for a stable operation. Specifications RCF: 1200xg and 2000xg Speed: 4000rpm and 6000rpm Max. capacity: 6 x 0.5/1.5/2ml or 2 x 8-tube PCR strips (0.2ml) Dimensions (diam. x H): 140 x 120mm Weight: 0.7kg Power supply: 100-240V~, 50/60Hz, 1A Type uniCFUGE 2 with EU plug uniCFUGE 2 with UK plug PK 1 1 Art. - Nr. 6.263 510 6.263 511 Price (DKK) 967,50 967,50 Specifications Motor: brushless DC motor Max. Speed: variable up to 6000rpm Accuracy Speed: ±25rpm Max. RCF: 2000xg Max. Load: 8 x 1.5/2ml or 8 x 0.2ml PCR tubes Dimensions (diam. x H): 160 x 116mm Weight: 1.1kg Power supply: 100 - 240VAC, 50/60Hz Type uniCFUGE 3 with EU plug uniCFUGE 3 with UK plug PK 1 1 Price Art. - Nr. (DKK) 6.263 520 1.417,50 6.263 521 1.417,50 For more information please visit www.llg-labware.com uniSPEC 2 Analysis at a glance! uniSPEC 2 is an inexpensive, basic UV/VIS-spectrophotometer suitable for pharmaceutical, biochemical and clinical lab applications as well as routine measurements such as kinetics, wavelength scans, quantitative analysis, multi-wavelength and DNA/Protein analysis. A reliable and robust instrument that is easy to operate. The included software provides a complete control of the spectrophotometer from a computer using the built-in USB port. In case of a sudden power cut the data can be restored. It is possible to store and save 200 calibration curves. Automatic wavelength setting, auto-zero and blank measurements. Both lamps can be individually turned on/off to extend the durability. A pre-adjusted lamp design allows a fast and easy lamp replacement. Specifications Stray Light: ≤0.1%T Data Output: USB port Printer Port: Parallel port Display: 128 x 64 Dots LCD Standard Cell Holder: 4-position 10 mm cell changer Lamps: D2 Lamp and W Lamp Power Requirements: AC 220V/50Hz or 110V/60Hz Dimension (WxDxH): 460 x 360 x 225mm Weight: 18kg Wavelength Range: 190-1100nm Bandwidth: 2nm Wavelength Accuracy: ±0.5nm Wavelength Repeatability: 0.3nm Wavelength Setting: Automatic Photometric Accuracy: ±0.5%T Photometric Repeatability: 0.3%T Photometric Range: -0.3-3A, 0-200%T, 0-9999C Stability: ±0.002A/h at 500nm Type uniSPEC 2 with EU plug uniSPEC 2 with UK plug PK 1 1 Th. Geyer Danmark ApS Art. - Nr. 6.263 610 6.263 611 Price (DKK) 17.992,50 17.992,50 Tel.: +45 4630 0030 Fax: +45 4630 0069 www.thgeyer.dk Mikroskopi For more articles see our Laboratory Catalogue from page 1064, 1073, 1077, 1079 onwards USB håndholdt mikroskop med indbygget 2 megapixels kamera, Ecoline LABSOLUTE® Objektglas With properties that comply with the DIN ISO 8037-1 and 8037-2 standard, CE marking and manufactured in compliance with the 98/79 EC (IVD) Directive, the LABSOLUTE® microscope slides made from soda lime glass form the ideal basis for exceptional and reproducible results in your microscopy. 76 x 26 mm, thickness approx. 1 mm. Special pris! The advantages for you: - With frosted area edge (20 mm wide) or coloured labelling fields in white, blue, pink, yellow, green, orange and violet - Edges Cut or ground - Edges 45° or 90° - Pre-cleaned and ready-for-use Objektglas med "ground edge" No sharp edges - for additional safety: use the ground version of the microscope slides made from soda lime glass to avoid cutting injuries or glass breakages during automated processing. Supplied in boxes of 50 in film-wrapped packaging. Type Edges PK Cat. No. Matt edge Without matt edge Label white Label blue Label pink. Label yellow Label green Label orange Label violet ground, 90° ground, 45° ground, 45° ground, 45° ground, 45° ground, 45° ground, 45° ground, 45° ground, 45° 50 50 50 50 50 50 50 50 50 7.695 003 7.695 004 7.695 012 7.695 013 7.695 014 7.695 015 7.695 016 7.695 017 7.695 018 Price Now DKK 22,50 21,80 31,50 31,50 31,50 31,50 31,50 31,50 31,50 DKK 15,10 14,60 21,10 21,10 21,10 21,10 21,10 21,10 21,10 Objektglas med "cut edge" Our tip: cut microscope slides are particularly economical and therefore represent an excellent alternative for routine tasks to the ground versions. Material: soda lime glass. Supplied in boxes of 50 in film-wrapped packaging. The advantages for you: - Also available without matt edge or coloured label - Corners generally 90° - Pre-cleaned and ready-for-use Typ PK Cat. No. Matt edge Without matt edge Label white Label blue Label pink. Label yellow Label green Label orange Label violet 50 50 50 50 50 50 50 50 50 7.695 002 7.695 001 7.695 005 7.695 006 7.695 007 7.695 008 7.695 009 7.695 010 7.695 011 Price Now DKK 19,50 13,90 22,90 22,90 22,90 22,90 22,90 22,90 22,90 DKK 13,10 9,30 15,30 15,30 15,30 15,30 15,30 15,30 15,30 - With integrated LED illumination and Motic application software Sensor CMOS 1/3“ 2 Megapixel with USB 2.0 output Illumination 8-LED in ring formation with 2-step brightness control Power direct from computer through USB2.0 connection Soft-grip focus wheel Direct capture button 2 Step First Magnification 10x-50x. Second magnification at 200x (depending on screen size) - Motic EcoLine Tool application software - Can be used on a Mac with preinstalled application Photo Booth Calibration slide and metal stand included. -29% Typ PK Cat. No. D-EL1 ecoline 1 9.727 034 Price Now DKK 697,50 DKK 495,00 Price Now DKK 24,80 21,80 28,10 30,00 36,40 36,40 25,90 30,40 33,80 38,60 40,50 DKK 16,60 14,60 18,80 20,10 24,40 24,40 17,30 20,40 22,60 25,90 27,10 LABSOLUTE® Dækglas The perfect addition to your microscopy system: LABSOLUTE® cover slips are made from highly durable borosilicate glass 3.3 of the first hydrolytic class and are guaranteed to be free from contamination, bubbles or streaks. They come with the CE mark as standard and are manufactured in compliance with the 98/79 EC (IVD) Directive, satisfying all of the requirements of ISO 8255-1 and 8255-2. The cover slips are available in two thicknesses and are supplied in especially handy and secure boxes. The advantages for you: - Thickness No. 1 (0.13 to 0.16) - Thickness No. 1.5 (0.16 to 0.19) especially for for Shandon coverslipping equipment - Supplied in plastic hinged-lid boxes with batch number, vacuum-packed in protective aluminium foil Dimensions mm 15 x 15 18 x 18 20 x 20 22 x 22 24 x 24 12 x 26 24 x 32 24 x 40 24 x 50 24 x 60 24 x 50 Typ No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1 No. 1.5 PK Cat. No. 200 200 200 200 100 100 100 100 100 100 100 7.695 022 7.695 023 7.695 024 7.695 025 7.695 026 7.695 027 7.695 028 7.695 029 7.695 030 7.695 031 7.695 032 11 pH måling For more articles see our Laboratory Catalogue from page 280, 309 onwards pH buffer farvekodet og " twin neck" flasker Universal pH indikator i ruller Ready-to-use buffer solutions for high quality and precision. The calibration vessel, integrated into the twin-neck dispensing bottles, allows the particularly economical dispensing of solution and prevents contamination. Specifications: - Accuracy to +/- 0.01 pH, tested and certified at 20°C - With data table for temperature dependence on the label - Traceable to the National Institute of Standards and Technology (NIST) - Shelf life: 24 months (pH 7 and 10) or 36 (pH 4) from the date of production - Colour coding Universal pH indicator represents a low-cost alternative for reliably determining the pH level from 1 to 14 and is made from high-quality filter papers soaked in indicator solution. The advantages for you: - Reliable pH level determination in 1.0 pH steps - With colour scale - Roll (L x W): 5 m x 7 mm pH-range 1.0 – 11.0 1.0 – 14.0 PK Cat. No. 1 2811.0001 1 2814.0001 Price Now DKK 53,30 53,30 DKK 32,30 32,30 Universat pH indikator i strips pH Content Colour pH 4.00 pH 7.00 pH 10.00 ml 250 250 250 Red Yellow Blue PK Cat. No. 1 1134.0252 1 1137.0252 1 1140.0252 Price Now DKK 72,40 72,40 72,40 DKK 47,30 47,30 47,30 CHEMSOLUTE® pH buffer The ready-to-use buffer solutions from CHEMSOLUTE® offer excellent quality and advantages in use. The buffer solutions will be delivered in polyethylene bottles. Specifications: - Traceable to the National Institute of Standards and Technology (NIST) - Accuracy: ±0.02 pH units (reference temperature 20°C) - Minimum shelf life: 24 months from date of manufacture pH Content pH 4.00 pH 7.00 pH 10.00 ml 1000 1000 1000 PK Cat. No. 1 1114.1000 1 1117.1000 1 1120.1000 Price Now DKK 159,80 159,80 159,80 DKK 103,90 103,90 103,90 Price Now DKK 184,50 201,00 231,00 DKK 119,30 129,80 149,30 Elektrolyt opløsning With the CHEMSOLUTE® pH indicator strips, you have everything you need for rapid and informative pH level analyses. In just a few seconds, you can create the ideal basis for your decisions - right there, without any prep work or accessories. The advantages for you: - Excellent accuracy thanks to easy readability - Guaranteed not to bleed - No contamination of the medium - Stable backing strips with reaction colour fields - Package content: 100 strips High-quality potassium chloride electrolyte solutions from CHEMSOLUTE® are ideal for the safe and reliable maintenance and care of electrodes. The advantages for you: - Ideal for topping up and exchanging reference electrolyte solutions in pH electrodes - Suitable for the long-term wet storage of electrodes Typ pH-range 0,0 – 14,0 2,0 – 9,0 12 PK Cat. No. 1 2714.0001 1 2740.0001 Price Now DKK 66,80 66,80 DKK 39,80 39,80 KCl solution 3 mol/l, silver ion-free KCl solution saturated, silver ion-free KCl solution 3 mol/l, saturated with AgCl Content ml 1.000 1.000 1.000 PK Cat. No. 1 1619.1000 1 1657.1000 1 1633.1000 pH måling For more articles see our Laboratory Catalogue from page 283 onwards pH-meter Lab 860 BNC, sæt CalClock function keeps your calibration under control: This unique combination of sensor evaluation and calibration timer monitors all calibration relevant parameters (buffer, electrode, curve slope, zero-point, time) and immediately indicates any errors. Specialtilbud Features: - keypad - clock - large LCD display - adjustable calibration interval - alarm - bi-directional RS 232C interface - USB (slave) connection - memory: 800 data records - GLP compliant - 5 point calibration Items supplied: pH meter Lab 860, electrode BlueLine pH15 with temperature sensor, support, cover, power supply and DIN buffers 4.01 and 6.87. Supplied with Electrode BlueLine pH15 Specifications Measuring range: Temperature range: -2.00 to +19.999pH or -999.9 to +999.9mV and -1999 to +1999mV -5.0 to +120.0°C -20% Type PK Cat. No. Lab 860 BNC Set 1 6.260 751 Price Now DKK 5.715,00 DKK 4.592,60 pH/ mV/ °C meter, HI 83141 pH/°C tester pHep®-4 Recently developed waterproof pH and temperature tester (IP67). This is the first pH tester with handheld measuring device features. Automatic two point calibration with 3 pre-programmed standard buffers (pH 7.01; pH 4.01; pH 10.01). Stability indicator for high-precision measurements. Simultaneous display of pH value and temperature. Optional automatic or manual temperature compensation. Includes exchangeable HI 73127 pH electrode. pH-meter complete with plastic-bodied pH electrode HI1230B, separate temperature probe, calibration screwdriver, 9 Volt battery. Splash-protected buttons. Special pris! Special pris! Specifications: Measuring range: Accuracy: Environmental conditions: Dimensions: Batteries: Weight: Type pHep®-4 Specifications: pH: mV: °C: pH calibration: 0.0 to 14.0 pH 0.0 to 60.0°C ±0.1 pH ±0.5°C 0 to +50°C 163 x 40 x 26mm 4 x 1.5V 100g PK Cat. No. 1 9.773 920 Temperature compensation: Dimensions: Battery type/operating life: 0.00 to 14.00/±0.01 0 to ±1999 (ORP)/±1 0.0 to 100.0/±0.4 manual, 2 point, through trimmers, (offset ±1 pH; slope 85 to 105%) automatic, 0 to 70°C (32 to 158°F) or fix at 25°C without temperature probe 185mm x 82mm x 45mm 1 x 9V/approx. 100 hours of continuous use -20% -20% Price Now DKK 707,30 DKK 565,90 Type HI 83141 PK Cat. No. 1 9.773 953 Price Now DKK 1.937,30 DKK 1.549,90 13 Omrøring For more articles see our Laboratory Catalogue from page 418, 426, 447 onwards Magnetomrører MIX 1 Komplet omrører RW20 digital 9.645 954 9.645 957 Ultra flat, up to 10 000 ml stirring volume, also suitable for viscous media. 100% maintenance-free and wear-free inductive 2mag-Magnetic-Drive concept for powerful mixing of solutions, speed range from 100 up to 2 000 rpm, jerkfree stirring even at low speeds. 4-step power settings for high power with regard to large and viscous stirring volumes and reduced power for the warming-free continuous operation. Clear digital display for speed and power settings, SoftStart for reliable catching/centering and safe accelerating of the stirring bar. QuickSet for quick setting of start and maximum speed, automatic memory function to save the last settings, outstanding long-life cycle of the hermetically sealed drive system, resistant stainless steel housing for easy and fast cleaning. Made in Germany. Specifications Stirring points: Stirring volume/stirring point: Speed range: Power setting: Material housing: Operation conditions: Electrical data: Dimensions (WxDxH): Protection category: Weight (gross): 1 1 - 10 000ml 100 - 2 000rpm 5/10/15/20 W (4-step) Stainless steel -10 up to +50°C (at 80% humidity) 100-240 V/50-60 Hz/1.5 A 188 x 238 x 38 mm IP64 approx. 4.0 kg Type -17% PK Cat. No. MIX 1 1 9.645 954 Price Now DKK 3.652,50 DKK 3.048,80 Multipunktsomrørere MIX 6/15 Without heating. With non-mechanical, electronic induction drive. Ideal for batch series stirring. Choice of 6-place, stirring position models which can stir up to 6 x 1000ml. Erlenmeyer flasks or 15-place models for up to 15 x 250ml beakers (high form). Digital stirring speed display and soft-start function. With 4 adjustable power level stirring speeds (5W to 20W). Easy to clean, hermetically sealed casing which can be washed under running water, ultra flat, space-saving profile and 100% synchronous speed control in all stirring positions. SoftStart. 3 years warranty, Made in Germay. Specifications Stirring points MIX 6/MIX 15: Stirring volume/stirring point: Stirring point distance MIX 6/MIX 15: Speed range: Power setting: Material housing: Operation conditions: R 1826 R 1342 R 182 - digital display - robust, slim-line, ergonomic design - technical improvements on the trusted RW 20 series design - constant power-drive - two speed ranges for universal use from 60 to 2000rpm - hollow-shafted chuck for rotor shaft height adjustment incl. R 1826 Plate stand (Cat. No. 9.224 292) incl. R 182 Boss head clamp (Cat. No. 9.224 032) incl. R 1342 Propeller stirrer (Cat. No. 9.197 006) Specifications Max. stirring volume (H2O): Viscosity range: Motor rating input/output: Output max. at stirring shaft: Speed range I (at 50 Hz): Speed range II (at 50 Hz): Dimensions (WxDxH): Weight: Supply requirements: Max. stirring shaft torque (at 100rpm.): Protection class (DIN EN 60529): 6/15 1 - 3 000ml 130mm/65mm 100 - 2 000 rpm 5/10/15/20 W (4-step) Stainless steel Special pris! 20L up to 10000mPas 70/35W 26W 60 to 500rpm. 240 to 2000rpm. 88 x 212 x 294mm 3.1kg 230V 50/60 Hz 150Ncm IP 20 -18% Type PK Cat. No. Price -21% Now Type MIX 6 MIX 15 14 1 9.645 956 1 9.645 957 DKK 9.217,50 11.550,00 DKK 7.590,00 9.405,00 RW 20 digital PK Cat. No. 1 6.231 401 Price Now DKK 7.492,50 DKK 5.919,00 Køling For more articles see our Laboratory Catalogue from page 730, 734, 780 onwards Gnistfri laboratoriekøleskab LKexv 3910 med Comfort elektronisk kontroller, +3 til +8°C Laboratory refrigerator with Comfort electronic controllers spark-free interior, especially for storing explosive and highly flammable substances - for instance in the chemical industry or in special laboratories. The interiors of the appliances are in compliance with the safety requirements of the EU Directive 94/9/EC (ATEX 95) and have been tested by electro-suisse SEV, the ATEX conformity evaluation organisation. Features: - Dynamic cooling system - Precision electronic controller with digital temperature display - Flexible, height-adjustable glass-shelves - Self-closing door with integrated lock Security package: - Visual and audible temperature and door alarm - Visual power failure alarm when mains power returns - Integrated data memory with min/max temperatures - Volt-free contact for alarm forwarding to an external remote warning system - RS 485 interface enabling external documentation - Access port for an external temperature sensor - Maximum temperature stability and consistency according to NF X15-140 Dimensions (WxDxH): external: internal: 9.698 981 9.698 685 Skuffesystem til køleskab, AluCool® High quality aluminium drawers including frame on smooth-running wheels with pull-out stop. Includes flexible dividing system with card pockets. Depending on the specific need, the dividing system allows the storage of drugs, blood and plasma with a space savings of up to 30%. With a few simple steps, the flexible dividers are taken out and the drawer can be cleaned easily and hygienically. 600 x 615 x 1840mm 440 x 435 x 1635mm -32% Type LKexv 3910 Capacity l 360 Energy consumption kWh (24h) 0.9 Temp. range max. °C +3 ... +8 PK Cat. No. 1 9.698 685 Price Now DKK 13.342,50 DKK 9.135,00 For refrigerators with internal dimensions (W x D): 440 x 435mm Description PK Cat. No. AluCool® 1 9.698 981 -27% Price Now DKK 871,50 DKK 640,50 Cirkulationskølere CC® og MPC® Combinations of immersion circulators and insulated refrigeration baths are low-cost solutions for direct thermoregulation within the temperature range -20/-30°C to 200°C. The refrigeration baths operate with natural refrigerants. A pump adapter (optional) can be fitted for thermoregulation of externally closed applications. Models with the Pilot ONE (Typ CC®) controller have a variable speed pressure/suction pump and are therefore suitable for external open thermoregulation applications. The temperature stability is 0.02K for the CC® models and 0.05K for the MPC® models. Items supplied: cooling thermostat, cooling bath of stainless steel Type CC®-K12 MPC®-K12 CC®-K15 MPC®-K15 CC®-K20 MPC®-K20 CC®-K25 MPC®-K25 Bath capacity L 12 12 15 15 20 20 25 25 Working Temp. range °C -20 ... +200 -20 ... +200 -20 ... +200 -20 ... +200 -30 ... +200 -30 ... +200 -30 ... +200 -30 ... +200 Cooling capacity kW at 0/-10/-20°C 0.2/0.12/0.05 0.2/0.12/0.05 0.2/0.12/0.05 0.2/0.12/0.05 0.35/0.27/0.16 0.35/0.27/0.16 0.35/0.27/0.16 0.35/0.27/0.16 Bath opening mm 290 x 152 290 x 152 290 x 152 290 x 152 290 x 329 290 x 329 290 x 329 290 x 329 -19% Bath tank depth mm 150 150 200 200 150 150 200 200 Dimensions (W x D x H) Pump max. mm 350 x 560 x 430 350 x 560 x 430 350 x 560 x 430 350 x 560 x 430 350 x 555 x 615 350 x 555 x 615 350 x 555 x 615 350 x 555 x 615 L/min / bar 27 / 0.7 20 / 0.2 27 / 0.7 20 / 0.2 27 / 0.7 20 / 0.2 27 / 0.7 20 / 0.2 PK Cat. No. 1 1 1 1 1 1 1 1 9.859 227 9.857 407 9.859 228 9.857 408 9.859 229 9.857 409 9.859 230 9.857 404 Price Now DKK 29.475,00 25.950,00 33.225,00 29.625,00 36.000,00 32.400,00 37.950,00 34.275,00 DKK 24.000,00 21.150,00 27.075,00 24.150,00 29.325,00 26.400,00 30.937,50 24.562,50 15 Prøveudtagning For more articles see our Laboratory Catalogue from page 514, 518, 521, 525 onwards Prøveudtagningssystem INGENIOUS Flasker i PP til vandprøver, sterile A new, easy-to-handle sample taking system for manual sampling. General purpose thanks to - quick and easy exchange of the sample taking equipment - simple change by pressing the spring mechanism - extremely strong fiber glass telescopic poles, non-corrosive - for up to 20 different sample taking devices - four different fiber glass telescopic poles extensible from 1.5m up to 6.00m in length 1 2 These sterile bottles are specially designed for taking, handling, transporting and storing water samples. Manufactured either as clear or amber colour from low density polypropylene. Clear bottles are manufactured from glass-like transperant special grade polypropylene. Amber bottles are manufactured from an amber coloured clear polypropylene which is higly translucent but still prevents the UV light penetrating inside the bottle. Square body form offers easy handling, and optimum space saving solutions during storage period. Wide bottle neck (GL 50) provides easy filling and pouring. Cap is made from high density polypropylene with self sealing lock with integral security ring. Unique cap inner design ensures hermetical closure and gurantees an excellent leak and contamination proof bottle. Embossed graduation (presicion of ±2%) on side wall enables volume verifications. Each bottle is labelled specifying e.g. sample and source descriptions, code and lot numbers and expiry date. Bottles with liquid sodium thiosulfate (20 mg/lt - acc to ISO/FDIS 19458:2006) are ideal to analyse water meant for human consumption, swimming pools, and any other water where clorine may modify the composition of the sample. Empty bottles, without sodium thiosulfate; ideal to sample water for physical and chemical analysis, as well as for other sample requirements that demands sterile bottles. Teleskop prøveudtager i glasfiber Very robust telescopic pole, ideal for sample taking. Fiber glass makes it almost indestructible and non-corrosive. Comfortable to carry even at low temperatures. Simple extension and adjustment mechanism. You can change the length easily by a quarter rotation. (Pic. 1). At telescope poles of 3.85 to 6 meter the length could be easily changed by using the clamp (Pic. 2). Comfortable use of spring mechanism. This type can take all samplers and catchers with universal connecting part. Capacity -11% Length PK Cat. No. m 1.45 - 2.75 1.50 - 3.85 1.50 - 5.00 1.50 - 6.00 1 1 1 1 3 6.801 684 6.241 444 6.263 282 6.263 283 Price Now DKK 277,50 380,30 671,30 738,80 DKK 247,10 338,30 597,40 657,80 4 Description PK Cat. No. ml 250 clear, sterile R 500 clear, sterile R 1000 clear, sterile R amber, sterile R 250 500 amber, sterile R 1000 amber, sterile R 250 clear, sterile R* clear, sterile R* 500 1000 clear, sterile R* 250 amber, sterile R* amber, sterile R* 500 1000 amber, sterile R* * with sodium thiosulfate -30% 108 84 30 108 84 30 108 84 30 108 84 30 9.001 075 9.001 076 9.001 077 9.001 078 9.001 079 9.001 080 9.001 081 9.001 082 9.001 083 9.001 084 9.001 085 9.001 086 Price Now DKK 546,80 598,50 354,80 648,00 661,50 388,50 587,30 614,30 360,00 668,30 693,00 399,80 DKK 382,90 418,90 248,30 453,80 463,10 271,90 411,00 430,10 252,00 467,60 485,30 279,80 Skuffeskeer og skeer, PS, sterile Fangstnet 3 for sample taking of solid material and organisms from water surfaces. Large version with 320x300mm width and length. Net made of polyamide (mesh width approx. 2 to 5mm), frame made of PVC material. With universal connecting part. -11% Type Material Dip net polyamide Aperture size mm 2-5 PK Cat. No. 1 6.263 286 Price Now DKK 405,00 DKK 360,40 Prøveudtagningsbæger 4 Made of stainless steel; nothing can be spilt because beaker automatically swings into a vertical position. Dimension of the beaker: 100mm diameter, 130mm height, 1 liter volume. With universal connecting part. -11% Type Material Pendulum beaker stainless steel 16 Capacity Litres 1 PK Cat. No. 1 6.263 290 Price Now DKK 487,50 DKK 433,90 - Individually sealed and sterilised in a polyethylene bag ready for one time use and disposal - Long handle increases the distance between the hand and the sample - Scoop stays vertical when packed or unpacked for use as weighing boat - Bright red colour reduces the chance of residual sample staying in the scoop or the scoop being accidently left behind in a sample - Colour can also serve as a code to avoid cross contamination Type Capacity Colour Scoop Scoop Scoop Scoop Scoop Scoop Spoon Spoon Spoon Spoon ml 60 125 250 60 125 250 1.2 2.5 5 15 white white white red red red white white white white PK Cat. No. -30% 1 1 1 1 1 1 1 1 1 1 9.150 461 9.150 462 9.150 463 9.150 464 6.242 234 9.150 465 9.150 639 9.150 640 9.150 641 9.150 642 Special pris! Price Now DKK 19,10 24,40 32,60 22,10 24,40 33,00 15,00 15,80 14,60 15,00 DKK 13,50 17,30 22,80 15,40 17,30 23,30 10,50 11,30 10,50 10,50 Volumetri For more articles see our Laboratory Catalogue from page 872, 878, 882 onwards Special priser! Målecylinder class A høj form Målekolber Class A høj form All LABSOLUTE® measuring cylinders, high form, with accuracy class A are made from high-quality borosilicate glass 3.3 and have a functional spout. The high shape guarantees greater legibility. The measuring cylinders are adjusted to "ln" (20°C). They comply as standard with DIN EN 4788, ISO 384, ISO 3585 and ISO 4787 and are supplied with a batch-specific certificate of conformity Contents ml 5 10 25 50 100 250 500 1.000 2.000 Graduation ml 0.1 0.2 0.5 1 1 1 5 10 20 PK Cat. No. 1 1 1 1 1 1 1 1 1 7.691 000 7.691 001 7.691 002 7.691 003 7.691 004 7.691 005 7.691 006 7.691 007 7.691 008 Price Now DKK 56,30 56,30 57,00 58,10 57,00 101,30 176,30 258,80 461,30 DKK 45,00 45,00 45,60 46,50 45,60 81,00 141,00 207,00 369,00 Målecylinder class B lav form All LABSOLUTE® measuring cylinders, low form, with accuracy class B are made from high-quality borosilicate glass 3.3 and have a functional spout. The measuring cylinders are adjusted to "ln" (20°C). They comply as standard with DIN EN 4788, ISO 384, ISO 3585 and ISO 4787. Contents ml 10 25 50 100 250 500 1.000 2.000 Graduation ml 1 1 1 2 5 10 20 50 PK Cat. No. 1 1 1 1 1 1 1 1 7.691 010 7.691 011 7.691 012 7.691 013 7.691 014 7.691 015 7.691 016 7.691 017 Price Now DKK 44,30 46,50 48,80 51,80 86,30 131,30 217,50 360,00 DKK 35,40 37,20 39,00 41,40 69,00 105,00 174,00 288,00 All LABSOLUTE® volumetric flasks, high form, with accuracy class A are made from high-quality borosilicate glass 3.3 and have a standard ground joint. The supplied autoclave-compatible plastic stoppers made from polypropylene (PP) seal the volumetric flasks so they cannot leak. The volumetric flasks are adjusted to "ln" (20°C). All LABSOLUTE® volumetric flasks all comply as standard with DIN EN 1042, ISO 384, ISO 3585 and ISO 4787 and are supplied with a batch-specific certificate of conformity. Contents Standard ground joint ml 5 10 20 25 50 50 100 100 200 250 500 1.000 2.000 10/19 10/19 10/19 10/19 12/21 14/23 12/21 14/23 14/23 14/23 19/26 24/29 29/32 PK Cat. No. 1 1 1 1 1 1 1 1 1 1 1 1 1 7.691 020 7.691 021 7.691 022 7.691 023 7.691 024 7.691 025 7.691 026 7.691 027 7.691 028 7.691 029 7.691 030 7.691 031 7.691 032 Price Now DKK 66,00 66,00 66,80 66,80 74,30 74,30 83,30 83,30 93,80 96,00 119,30 198,80 273,80 DKK 46,20 46,20 46,70 46,70 52,00 52,00 58,30 58,30 65,60 67,20 83,50 139,10 191,60 17 Forbrugsartikler For more articles see our Laboratory Catalogue from page 154, 161, 182 onwards LLG disperser til PARAFILM® M, orange, ABS Write-on™ tape ® L A B W A R E Specially coated plastic tape with adhesive backing. Makes labels of any length. Can be used with any pens. Excellent adhesion to glass, metal, PE etc. Resistant to humidity, as well as acids and alkali solutions in weak concentrations. Leaves no residue when removed. PARAFILM® M feeds through easily and is easy to cut using the safety cutting device. For rolls with width up to 100mm. Temperature resistance up to +257°C: up to +80°C: Resistant to -80°C. Colour Width 30 min 24 h Length -30% -30% PK Cat. No. Price Type PK Cat. No. Now PARAFILM® M dispenser, ABS mm 12.7 19.0 25.4 12.7 19.0 25.4 12.7 19.0 25.4 12.7 19.0 25.4 12.7 19.0 25.4 12.7 19.0 25.4 12.7 19.0 25.4 White White White White White White Red Red Red Yellow Yellow Yellow Green Green Green Blue Blue Blue Orange Orange Orange m 36.6 36.6 36.6 54.9 54.9 54.9 36.6 36.6 36.6 36.6 36.6 36.6 36.6 36.6 36.6 36.6 36.6 36.6 36.6 36.6 36.6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9.040 379 9.040 380 9.040 381 9.040 351 9.040 352 9.040 353 9.040 336 9.040 341 9.040 346 9.040 337 9.040 342 9.040 347 9.040 338 9.040 343 9.040 348 9.040 339 9.040 344 9.040 349 9.040 340 9.040 345 9.040 350 DKK 172,50 213,00 266,30 217,50 261,80 384,00 172,50 213,00 266,30 172,50 213,00 266,30 172,50 213,00 266,30 172,50 213,00 266,30 160,50 213,00 266,30 DKK 120,80 149,30 186,40 152,30 183,40 268,90 120,80 149,30 186,40 120,80 149,30 186,40 120,80 149,30 186,40 120,80 149,30 186,40 112,50 149,30 186,40 1 9.170 006 Price Now DKK 369,80 DKK 258,80 Parafilm® M sealing film Can be stretched up to 200% and clings around irregular shapes and surfaces. LLG Lab notebog ® Parafilm® M is resistant to many polar substances such as saline solutions, inorganic acids and alkaline solutions for up to 48 hours (After this time it may become brittle). Parafilm® M conforms to general FDA requirements if used below 55°C. L A B W A R E For recording research data, experimental procedures, and design ideas. Use these notebooks to keep your information safe and well organised. Numbered, acid-free, grid pages include spaces for title, project number, book number, date, and witness signature. Lined notebooks feature college ruled pages for easy report writing. Covers are waterproof and chemical-resistant. All notebooks contain periodic and conversion tables in the back. Admissible as court evidence when used as prescribed by law. Measures: 216 x 279mm. -28% Description Type Colour 100 pages 200 pages 200 pages grid grid lined black blue red 18 PK Cat. No. 1 9.050 750 1 9.050 751 1 9.050 752 Price Now DKK 167,30 243,80 243,80 DKK 121,10 176,60 176,60 Parafilm® M data Toxicity Melting temperature: Burning point: Continued use temperature: Stretching ability: Elongation at tear: Gas permeability over 24 hours at 23°C and 50% relative air humidity O2 (Oxygen): N2 (Nitrogen): CO2 (Carbon dioxide): Steam permeability over 24 hrs. at 37°C and 90% relative air humidity: Type PARAFILM® M PARAFILM® M PARAFILM® M Width Length mm 50 100 100 m 75 38 75 Non-toxic 60°C 301°C -45°C to +50°C 200% 300% less than 350cm³/m² less than 105cm³/m² less than 1100cm³/m² 0.8g/m² PK Cat. No. 1 9.170 003 1 9.170 002 1 9.170 005 -33% Price Now DKK 277,50 393,80 495,00 DKK 187,50 265,90 334,10 Forbrugsartikler For more articles see our Laboratory Catalogue from page 154, 161, 182, 253 onwards Molekylebyggesæt, Molymod® LLG bordpapir DescProtect ® L A B W A R E DescProtect is a durable paper which quickly absorbs liquid spills. The PE-coated base layer stops liquids reaching the work surface. - stays flat, does not ripple or curl to de-stabilise vessels - white surface can be written on using pens or pencils - rapid absorption of liquid spills - excellent fluid protection - no contamination of work surfaces or laboratory cabinets - suitable for school laboratories, wet chemistry, industry Surface protection paper with two layers. Layer 1: Highly absorbent carrier paper, sucks up spilled toxic or radioactive liquids quickly; Layer 2: Wetness impermeable polyethylene layer, protection for lab workbenches, trays or chemical cabinets. Additional advantages: impermeable cover in animal cages, ideal in humidity chambers for atmospheric regulation -30% The Molymod® system is an original, unique system of high quality molecular models. The set consists of a variety of atom parts and links designed to make a large number of possible structures relevant to a specific chemistry subject or use, e.g. Biochemistry, Organic or Inorganic. All sets are fully compatible. Atom parts are made of solid clouded plastic spheres. They are available with holes from 1 to 6 in the usual angular orientations. -29% Type Description Introductory Set Organic Set, large Biochemistry Set, large Organic Set, small Inorganic/Organic Set, small Inorganic/Organic Set, large Biochemistry Set, small 48 atom parts, 62 links 111 atom parts, 140 links 257 atom parts, 160 links 50 atom parts, 64 links 51 atom parts, 38 links 106 atom parts, 86 links 72 atom parts, 40 links PK Cat. No. 1 1 1 1 1 1 1 9.883 101 9.883 103 9.883 107 9.883 108 9.883 109 9.883 104 9.883 110 Price Now DKK 201,00 408,00 768,00 202,50 204,00 405,00 235,50 DKK 142,90 289,50 545,30 143,60 144,80 287,60 167,30 Type Size PK Cat. No. Sheets Spool 460mm x 570mm 400mm x 50m 50 9.160 270 1 9.160 271 Price Now DKK 243,80 392,30 DKK 170,60 274,50 Sikkerhedsbox DURAPorter™. PC Bægerglas i PP, uden hank (Griffin) Plastic measuring beakers without handles (Griffin beakers) are handy helpers in every laboratory. The natural-coloured LABSOLUTE® Griffin beakers are made from chemically resistant polypropylene (PP) and are therefore especially lightweight. They feature a clearly legible printed blue scale and a spout. Production is compliant with ISO 7056. The advantages for you: - Approved for food use - Can be autoclaved at 121° C - Long-term range of applications at 100 °C (as with all plastic products, the measuring beakers must not be used with naked flames) - Smooth surfaces for simple and quick cleaning - Excellent resilience to strong, concentrated acids and alkalis, as well as aliphatic alcohols - Good resistance to ketones, aldehydes, as well as aliphatic and aromatic hydrocarbons. - Easily stackable and therefore can be stored in small spaces Contents Graduation ml 25 50 100 250 500 1.000 2.000 ml 5 10 10 25 50 50 100 PK Cat. No. 2 2 2 2 2 2 1 7.693 000 7.693 001 7.693 002 7.693 003 7.693 004 7.693 005 7.693 006 Ideal for transporting biological and clinical samples, as well as instruments and products that you want to keep clean and dry under testing environmental conditions. The clarity of the DuraPorter™ enables the user to visibly check sample integrity, so that it can be opened using the right precautions. - Polycarbonate construction are available in three colours for use/owner identification - Silicone water-tight seal and three lid clasps provide secure closure - Carry handle folds neatly into body space allowing the units to be stacked - Lid opens a full 180°, allowing total access to contents and making it easier to clean - Will accommodate 13 and 16 mm tubes in a 72-place OneRack™, or similar sized/brand of rack - Use the separators provided to create your own compartment sizes, or use empty to transport larger products and equipment - Autoclavable - Dimensions (WxDxH): 380 x 160 x 196 mm Price DKK 10,90 12,00 12,80 18,00 26,60 40,50 36,80 -30% Colour Clear with blue handles Yellow with yellow handles Red with red handles PK Cat. No. 1 9.194 005 1 9.194 006 1 9.194 007 Price Now DKK 600,00 600,00 600,00 DKK 420,00 420,00 420,00 19 Th. Geyer Danmark ApS Tel.: +45 4630 0030 Fax: +45 4630 0069 www.thgeyer.dk LABORTOPS Digitalt lommetermometer TLC 700 The practical folding thermometer TLC 700 is suitable for measuring the core temperature during transport, storage and receiving of goods. Thanks to the foldable penetration probe the waterproof thermometer (IP 65) can be stored safely. The device is primarly characterized by its small size and the large display and comes with a calibration certificate. Specifications Measuring range/Resolution: Accuracy: Probe: Battery type: Dimensions (WxDxH): Weight: -40 to +250°C/ 0.1°C ±0.5°C (-20 to +150°C) ±1.0°C (remaining range) 70mm 1 x 3V (CR 2032) 118 x 33 x 15mm approx. 41g -28% Type Digital pocket thermometer TLC 700 PK 1 Alle priser er nettopriser excl. moms og gældende frem til 31.12.2014. Der pålægges ingen gebyrer. Der tages forbehold for trykfejl. Cat. No. 6.257 785 Price Now DKK 300,00 DKK 217,50