Transcript
ENGLISH INSTRUCTIONS
HAV-CR30 HAV-CR40 Digital Clock Radio RADIO OPERATION Rotate to switch on the radio the volume knob clockwise until a “click” sound. Switch the band selector to FM or AM position. Adjust the volume knob to the desired volume level. Turn the tuning control to the frequency of the desired station. To turn the radio off, rotate the volume knob anti-clockwise until a “click” sound. CLOCK SETTING The radio shows 12.00, when first powered on. To set the time, press the “SET” button. The “TIME” icon flashes on the display. Adjust the hour by “UP” and “DOWN” button and press “SET” to confirm. Set the minute, the year, the month and the date accordingly. 12-hour or 24-hour system can be changed at by pressing the “12/24” (“UP”) button. COUNTDOWN TIMER To start counting down: Press the “TIMER” button to enter the “timer mode”.(The default starting time is 23:59:59.) Press the “TIMER” button to start the countdown process. Press it again to pause and press again to resume. During counting, the unit will restore to “time mode” if no button is pressed within one minute. Once the counting time reaches 00:00:00, the unit will sound. Press any button to stop the ring.
To stop the countdown: During counting press the “TIMER” button to pause the counting. Press “SET” to restore to the default time. Or press “UP” to set the time to 00:00:00. To set count down time: Press “SET” button and the hour digits will flash. Use “UP” and “DOWN” buttons to adjust the hour and press “SET” to confirm. Adjust the minute and the second accordingly. ALARM OPERATION To set the alarm time: 1) Press “MODE” button until “ALARM” is show in the display. 2) Press “SET” and the hour digits will flash. Use “UP” and “DOWN” buttons to adjust it and press “SET” to confirm. 3) Change the minute, the length of the snooze period and the alarm melody accordingly. To turn on/off the alarm and the snooze function: In “time mode”, press “MODE” button to enter the “alarm mode”. Press “SNOOZE”/”UP”/”DOWN” to turn on/off the alarm with/without the snooze function. Respective icon must be shown correctly. At pre-set alarm time with only the alarm function being switched on, the unit will ring for one minute. Or you could stop the ringing by press any button. At pre-set alarm time with the alarm and the snooze functions being switched on, the unit will ring for one minute and then ring again after the pre-set time period of snooze (“Snooze” icon flashes). This will repeat twice. Or you could stop the whole ringing process by press the “SET” button during the ringing. THERMOMETER Temperature in Celsius or in Fahrenheit can be changed by pressing the “C/F” (“DOWN”) button or the “SNOOZE LIGHT” button. The temperature range is: 0°C-50°C (32°F-122°F).
ANTENNA The radio has a built-in ferrite antenna for AM band. Changing the position of the radio may improve the reception of AM. The FM reception depends on the position of the flexible wire antenna at the back of the radio. SPECIFICATIONS HAV-CR40 Frequency range Output power Speaker impedance Battery backup Power source Battery
: FM 88-108MHz, AM 530 -1600kHz : 3W : 8Ω 0.5W : DC9V : AC 230V 50HZ : 9V battery for clock back-up only.
HAV-CR30 Frequency range Output power Speaker impedance Battery backup Power source Battery
: FM 88-108MHz, AM 530 – 1600kHz : 3W : 8Ω 0.5W : (not applicable) : DC 6V : 4xAAA
WARNING: To reduce risk of electric shock, this product should ONLY be opened by an authorized technician if service is required. Disconnect the product from mains and other equipment if a problem should occur. Do not expose the product to water or moisture. WARRANTY: No guarantee or liability can be accepted for any changes and modifications of the product or damage caused due to incorrect use of this product. GENERAL: Designs and specifications are subject to change without notice.
