Hazardous Location Telemetry Equipment

Transcript

HAZARDOUS LOCATION TELEMETRY EQUIPMENT CATALOGUE PCS1610 A Company Driven by Innovation, rewarded by Customer Satisfaction COMPANY SOLEXY specializes in devices and patented technology for radio and buss transmissions in hazardous classified areas such as refineries, chemical plants, mines, off shore rigs and other potentially hazardous rated areas. SOLEXY has two Operation Centers: - Cincinnati, Ohio, USA, where the Research and Development of components, and antennas are engineered. Manufacturing of standard components is also based here. Managed by Mr. Mark Peters, this location services the US, Canadian and Mexican markets. - Desenzano del Garda, Italy, where the systems integration manufacturing is located. Managed by Mr. Giovanni Soldo, this location services European, Asian, African, Australian, Central America and South American markets. We are known for the first wireless industrial products on the market. We originally specialized in limit switches, but eventually developed and sold other sensors. To enable this technology to be used in our typical markets of refineries, chemical plants and up-stream processes, we realized the need to develop products that would allow use of this wireless technology in classified areas. Our flameproof intrinsically safe barriers for radios and busses allowed transmission of RF signals into classified “Hazardous Areas”. Expanding on the need of this technology in industrial environments, we developed a line of industrial antennas that meets the demanding requirements and hostility of the process environment. Expanding our patented technology and realizing the demand to protect other signals, we developed a solution for Ethernet. It is now possible to transmit Ethernet signals from explosion proof enclosures or purge panel systems into a hazardous area with the use of our Passive Ethernet barrier, without the cost of additional sealing devices, area rated conduit systems, or additional power. Our product range is totally designed and manufactured according to the stringent specifications of both European and North American standards. Our technical department works with highly sophisticated systems, which include state-of-the-art 3D design software, finite element analysis, vector network analyzers, and other electronic equipment. We also have an engineering test laboratory equipped with sophisticated equipment and instrumentation that allow us to study, analyze, simulate and verify mechanical/dimensional, circuit analysis and RF performance. For increased product dependability every process is controlled during all production phases according to specific standards and internal procedures. This commitment to excellence has earned us the UL, MSHA, ATEX and IECEx certifications that make us a world-class company known for our high quality standards. From design to finished product and from sales to shipment, all procedures and processes are documented to give our customers reliable products, quick deliveries and the highest product service. SOLEXY products are certified by North American and European independent approval agencies to the environment and hazardous area requirements required throughout the world. Our products are ATEX and IECEx certified for use in explosion proof and intrinsically safe applications, UL listed for general purpose, intrinsically safe and explosion proof applications. We are also MSHA approved for use in US mining operations. When Product Safety Is not an option, you can count on Solexy APPROVALS PRODUCTS Solving a Complex problem with Simple Solutions EXPLOSION PROOF ANTENNA COUPLERS AX series patented (7057577) explosion proof antenna couplers allow transmission of radio Frequency signals into hazardous areas by incorporating an intrinsically safe barrier circuit, encapsulated in an explosion proof housing, all internal to a seal-off fitting in a single compact package. Available with UL, ATEX, IECEx or MSHA certifications, making the AX Coupler a truly world-wide solution! AW series weather proof antenna couplers provide a robust weather proof connection between the radio and aggressive atmospheric conditions. Common applications include coastal, high wash down, pharmaceutical and chemical and food processing applications. ETHERNET BARRIERS BXF and BAF series patented (7507105) Ethernet couplers allow transmission of Ethernet into hazardous areas by incorporating an intrinsically safe barrier circuit and a seal-off fitting into a single package. BXF series Ethernet couplers include an explosion proof housing for use in hazardous areas, and BAF series Ethernet couplers include an aluminum housing with gasket ideal for use in purged panels and other non-hazardous areas. BXF and BAF series Ethernet couplers are for 10/100Ethernet signals and operate with CAT5e cable. Available with UL, ATEX, IECEx or MSHA certifications. ANH and ANF series antennas are hand built and tuned for the best performance. The rugged construction of the ANH will stand up to high levels of abuse, and the flexible design of the ANF “gives” to impacts to prevent damage and misalignment of the antenna. Their sealed UV and corrosion resistant housings and nickel plated fittings with gold contacts provide a reliable RF connection in hostile environments. hazardous area wireless systems WS and WA series hazardous area enclosures are available as Junction boxes, Wi-Fi hotspots configured as a master, client or repeater, Radio Modems that can be used to interface remote serial ports and digital and analog I/O from the field to remote locations and totally wire free transmission of RF signals. Optional Intrinsically Safe Ethernet signals can be added with minimal cost of installation. Radio modems with remote I/O can transmit and receive using Modbus protocol as a standard option. Available in either a stainless steel (WS) or powder coated aluminum (WA) explosion proof rated enclosure. All Approved for ATEX, IECEx and UL. Products that you can rely on, Signals you can count on ANTENNAS ANTENNA COUPLER RX SERIES Solexy’s patented (7,057,577) Explosion-Proof Antenna Coupler permits the installation of a passive antenna in hazardous areas. This coupler is designed to be used directly with listed explosion proof housings or conduit fittings. An integrated blocking circuit prevents potentially hazardous energy from reaching the antenna in case of radio, modem, or access point failure. It also allows for antenna removal in hazardous areas. The coupler’s robust design allows for connection to practically any radio and antenna. It is a highly flexible and cost effective solution to hazardous area radio system deployment. The coupler can also be used as a cable bulkhead. FEATURES Short Circuit Protection No Sealing Fitting Required Environmental Protection Flexibility Certification Includes integrated blocking circuitry. Fitting is approved for hazardous locations and can be installed with a simple wrench. 300 series stainless steel construction and integral potting protects electronics from corrosive environments. Permits a wide variety of passive antennas to be installed in hazardous areas. Antennas may be removed and/or installed with power on. Perfect for a cable bulkhead connection The RX Series is certified Atex and IECEx as an apparatus, and can be installed per the conditions of acceptability, without further assessment. ATEX Apparatus Certification B13013-00-03 - Data contained in this specification is subject to change without notice UL Component Certification Maximum Fault Voltage Maximum Antenna Power Output (EIRP) I M2 (M1) Ex db mb [ia Ma] I Mb II 2 (1) G Ex db mb [ia Ga] IIA/IIB/IIC T5/T6 Gb II 2 (1) D Ex tb mb [ia Da] IIIC T100°C/T80°C Db Class I, II Div I Group A,B,C,D,F,G (UL File nr. E358609) 250VDC, 250VAC 50-60Hz IEC Gas Group I and III IIA IIB Max Threshold Power Limit 6W 6W 3.5W IIC 2W For more details about RF power input and output (EIRP) allowed please consult installation and operation manual Approximate Insertion LossdB Approximate Weight Minimum Dieletric Strength Impedance Housign Material Ambient Temperature Range Frequency 100MHz 500MHz 1.4GHz 1.7GHz 2.5GHz 3.9GHz 4.9GHz 5.4GHz 6.0GHz J version 1.0 0.4 0.4 0.5 0.8 R version 1.3 0.6 0.6 0.6 1.2 1.2 0.8 2.0 0.32 kg 1500V 50 Ω 300 series stainless steel -40°C +85°C www.SOLEXY.net SPECIFICATIONS ANTENNA COUPLER RX SERIES DIMENSIONAL DRAWINGS RADIO SIDE CONNECTOR 3/4-14 NPT M25 RX Series with coax cable embedded (optional execution on request) 1.25 [31.8mm] ANTENNA SIDE CONNECTOR RADIO SIDE CONNECTOR RXF RXS 0.60 [15mm] 1.58 [40mm] 3/4-14 NPT M25 RADIO SIDE CONNECTOR Ø1.375 [35mm] 0.38 [9.5mm] 2.52 [64mm] ANTENNA SIDE CONNECTOR COAX LENGTH ACCORDING TO CUSTOMER NEEDS 1.25 [31.8mm] RXN 0.60 [15mm] 1.58 [40mm] Ø1.375 [35mm] 0.60 [15mm] 2.52 [64mm] NOMENCLATURE a Antenna Side Connector F RP-SMA Female N N Female S SMA Female b Thread Connection 3 3/4” NPT M M25x1.5 (IECEx and Atex only) c Housing Material S AISI 303 L AISI 316L dd N 3 Radio Side Connector 02 RP-SMA Female (RXF and RXN only) 04 SMA Female (RXS only) SOLEXY SRL Via Enrico Fermi, 2 25015 Desenzano del Garda (BS) Italy Phone (+39) 030 787.0.787 | [email protected] www.solexy.net S ___ ___ ___ a b c 02 00 J X0 ____ ____ ___ ___ dd ee f gg ee Coax cable length radio side (optional on request) 00 no cable (with connector on body) f Version (frequency range) J optimized from 100 MHz to 1.4 GHz R optimized from 500 MHz to 3.9 GHz and from 4.6 GHz to 6 GHz L optimized from 3.9 GHz to 4.6 GHz gg Approval N0 cURus Recognized Component Marking X0 IECEx and ATEX Apparatus Marking XN IECEx and ATEX Apparatus Marking and cURus Recognized Component Marking (dual marking) SOLEXY USA, LLC 10168 International Blvd. Cincinnati (OH) 45246 USA Phone (+1) 513.860.5465 | [email protected] www.SOLEXY.net RX HEAVY DUTY ANTENNA DIPOLE ANH SERIES The range and performance of a RF link is critically dependent upon the antenna and it is one of the more complex aspects of on RF design. An antenna can make or break a wireless network. The proper antenna can optimize the range, reliability and performance of a radio network. FEATURES HybridTM technology Embedded HybridTM circuitry allows for maximum perfomance and unmatched durability ANH Heavy Duty series Rugged construction allows the use of our antennas in hostile envinronments where weather and abuse are a factor Frequency Available for 868 MHz, 900 MHz and 2.4 GHz N Male connector Available for vertical or 90° mounting 2 SPECIFICATIONS 1,8 1,6 1,4 1,2 1 840 845 850 855 860 865 870 875 880 885 890 930 935 Frequency (MHz) ANH42 Frequency Range Impedance (nominal) VSWR (average) Gain max 855 - 883 MHz 50Ω @ 868 MHz 1.14 : 1 (Average) 2.00 dBi 2 1,8 1,6 ANH52 Frequency Range Impedance (nominal) VSWR (average) Gain max 890 - 935 MHz 50Ω @ 915 MHz 1.14 : 1 (Average) 2.00 dBi. VSWR B15016-00-01 - Data contained in this specification is subject to change without notice ANH42 1,4 1,2 1 890 895 900 905 910 915 920 Frequency (MHz) ANH52 925 www.SOLEXY.net Omni Vertical 1/2 (dipole) N Male Brass nickel plated UV resistant ABS -40°C +80°C VSWR Radiation Polarization Wave Connector Material Ambient temp. range HEAVY DUTY ANTENNA DIPOLE ANH SERIES ANH72 2 2.35 - 2.55 GHz 50Ω @ 2.45 GHz 1.13 : 1 (Average) 2.00 dBi 1,8 1,6 VSWR Frequency Range Impedance (nominal) VSWR (average) Gain max 1,4 1,2 1 2,35 2,4 2,45 2,5 2,55 Frequency (GHz) ANH72 DIMENSIONAL DRAWING (inch) 0.93 [23.62mm] 0.93 [23.62mm] ANH42-CNRU ANH52-CNRU ANH72-CNRU A A inch [mm] ANH42-CNSU ANH52-CNSU ANH72-CNSU 6.45 [158.20] 6.45 [158.20] 3.85 [97.80] Model B inch [mm] ANH42-CNRU ANH52-CNRU ANH72-CNRU 6.24 [158.50] 6.24 [158.50] 3.75 [95.25] B 1.60 [40.64mm] NOMENCLATURE ANH 5 2 a SOLEXY SRL - C N S U b a Frequency 4 5 7 868 MHz 900 MHz 2.4 GHz b Antenna connection 3 C N Female N Male c Antenna mounting S R Straight (vertical) Elbow (90°) c Via Enrico Fermi, 2 25015 Desenzano del Garda (BS) Italy Phone (+39) 030 787.0.787 | [email protected] www.solexy.net SOLEXY USA, LLC 10168 International Blvd. Cincinnati (OH) 45246 USA Phone (+1) 513.860.5465 | [email protected] www.SOLEXY.net ANH42-CNSU ANH52-CNSU ANH72-CNSU Model HEAVY DUTY ANTENNA J-POLE ANH SERIES The range and performance of a RF link is critically dependent upon the antenna and it is one of the more complex aspects of on RF design. An antenna can make or break a wireless network. The proper antenna can optimize the range, reliability and performance of a radio network. FEATURES J-Pole technology This highly stable, higher gain antenna goes the distance and is in a smaller package compared to other high gain antennas. With a higher gain ground plane it is less sensitive to its installed environment ensuring stable communication at longer distances ANH Heavy Duty series Rugged construction allows the use of our antennas in hostile envinronments where weather and abuse are a factor Frequency Available for 868 MHz, 900 MHz and 2.4 GHz N Male connector Available for vertical or 90° mounting 2 SPECIFICATIONS 1,8 Omni Vertical J-Pole configuration N Male Brass nickel plated UV resistant ABS -40°C +80°C 1,6 VSWR Radiation Polarization Wave Connector Material Ambient temp. range 1,4 1,2 1 840 845 850 855 860 865 870 875 880 885 890 Frequency Range Impedance (nominal) VSWR (average) Gain max ANH53 Frequency Range Impedance (nominal) VSWR (average) Gain max ANH43 855 - 883 MHz 50Ω @ 868 MHz 1.4 : 1 (Average) 3.00 dBi 890 - 935 MHz 50Ω @ 915 MHz 1.4 : 1 (Average) 3.00 dBi. 2 1,8 1,6 VSWR B15016-00-01 - Data contained in this specification is subject to change without notice ANH43 1,4 1,2 1 890 895 900 905 910 915 920 Frequency (MHz) ANH53 925 930 935 www.SOLEXY.net Frequency (MHz) HEAVY DUTY ANTENNA J-POLE ANH SERIES ANH73 2 2.35 - 2.55 GHz 50Ω @ 2.45 GHz 1.4 : 1 (Average) 4.35 dBi 1,8 1,6 VSWR Frequency Range Impedance (nominal) VSWR (average) Gain max 1,4 1,2 1 2,35 2,4 2,45 2,5 2,55 Frequency (GHz) ANH73 DIMENSIONAL DRAWING 0.79 [20.10mm] 0.79 [20.10mm] A ANH43-CNSU ANH53-CNSU ANH73-CNSU Model A inch [mm] ANH43-CNSU ANH53-CNSU ANH73-CNSU 13.55 [344.20] 13.55 [344.20] 6.17 [156.70] Model B inch [mm] ANH43-CNRU ANH53-CNRU ANH73-CNRU 13.95 [354.30] 13.95 [354.30] 6.57 [166.90] B ANH43-CNRU ANH53-CNRU ANH73-CNRU 1.50 [38.10mm] NOMENCLATURE ANH 5 3 a SOLEXY SRL - C N S U b a Frequency 4 5 7 868 MHz 900 MHz 2.4 GHz b Antenna connection 3 C N Female N Male c Antenna mounting S R Straight (vertical) Elbow (90°) c Via Enrico Fermi, 2 25015 Desenzano del Garda (BS) Italy Phone (+39) 030 787.0.787 | [email protected] www.solexy.net SOLEXY USA, LLC 10168 International Blvd. Cincinnati (OH) 45246 USA Phone (+1) 513.860.5465 | [email protected] FLEXIBLE HEAVY DUTY ANTENNA ANF SERIES The Solexy Highly Flexible Antenna is designed for rough environments, this along with our Heavy Duty Line of antennas meets the demands of the tough applications while being affordable yet durable. Solexy Antennas have met the demands and are well known throughout the Oil and Gas industries. FEATURES Flex technology This Highly flexible antenna was designed to meet the requirements of a high traffic environment, one hit and it bounces right back. It also has over a 25Kg (55 lbs.) pull strength. This antenna has the signal dependability of a Dipole antenna and the flexibility to bounce back from any hit ANF Heavy Duty series Rugged construction allows the use of our antennas in hostile envinronments where weather and abuse are a factor. Frequency Available for 868 MHz, 900 MHz and 2.4 GHz N Male connector Available for vertical or 90° mounting SPECIFICATIONS Ambient temp. range -40°C +80°C 2 1,8 1,6 1,4 1,2 1 840 845 850 902 - 928 MHz 50Ω @ 915 MHz 1.14 : 1 (Average) 2.00 dBi 870 875 880 885 890 925 930 935 940 VSWR 2 1,8 VSWR B15015-00-01 - Data contained in this specification is subject to change without notice Frequency Range Impedance (nominal) VSWR (average) Gain max 865 ANF42 855 - 883 MHz 50Ω @ 868 MHz 1.14 : 1 (Average) 2.00 dBi ANF52 860 Frequency (MHz) ANF42 Frequency Range Impedance (nominal) VSWR (average) Gain max 855 1,6 1,4 1,2 1 890 895 900 905 910 915 920 Frequency (MHz) ANF52 www.SOLEXY.net Omni Vertical 1/2 N Male Brass nickel plated UV resistant PUR Soft Black PVC Black Delrin VSWR Radiation Polarization Wave Connector Material Antenna Tip Adapter VSWR FLEXIBLE HEAVY DUTY ANTENNA ANF SERIES ANF72 VSWR 2.35 - 2.55 GHz 50Ω @ 2.45 GHz 1.14 : 1 (Average) 2.00 dBi 2 1,8 VSWR Frequency Range Impedance (nominal) VSWR (average) Gain max 1,6 1,4 1,2 1 2,35 2,4 2,45 2,5 2,55 Frequency (GHz) A ANF52-CNSU ANF42-CNSU ANF72-CNSU ANF52-CNRU ANF42-CNRU ANF72-CNRU B 0.8 [20.32mm] Model A inch [mm] ANF42-CNSU ANF52-CNSU ANF72-CNSU 11 [279.4] 11 [279.4] 7 [177.8] Model B inch [mm] ANF42-CNRU ANF52-CNRU ANF72-CNRU 11.4 [289.56] 11.4 [289.56] 7.4 [187.96] 1.13 [28.70mm] NOMENCLATURE ANF 5 2 a SOLEXY SRL - C N S U b Via Enrico Fermi, 2 25015 Desenzano del Garda (BS) Italy Phone (+39) 030 787.0.787 | [email protected] www.solexy.net a Frequency 4 5 7 868 MHz 900 MHz 2.4 GHz b Antenna connection 3 C N Female N Male b Antenna mounting S R Straight (vertical) Elbow (90°) c SOLEXY USA, LLC 10168 International Blvd. Cincinnati (OH) 45246 USA Phone (+1) 513.860.5465 | [email protected] www.SOLEXY.net ANF72 DIMENSIONAL DRAWING (inch) HEAVY DUTY ANTENNA GPS ANH SERIES The Solexy's ANHA and ANHB series is a selection of heavy duty antennas specifically designed for satellite applications, covering a wide range of frequency bands including GPS, GLONASS and IRIDIUM. The ANHA and ANHB series are passive, narrow bandwidth and high gain antennas, perfectly compatible with Solexy's AX and RX intrinsically safe antenna couplers.The ANHA and ANHB series are RHCP (Right Hand Circular Polarized) in order to be compatible with the propagated GPS signals. FEATURES Passive High gain passive execution to be used in comination with intrinsically safe Solexy antenna couplers ANH Heavy Duty series Rugged construction allows the use of our antennas in hostile envinronments where weather and abuse are a factor Frequency Available for GPS/GLONASS and IRIDIUM systems N connector Available N Male straight or elbow and N Female stright bulkhead SPECIFICATIONS B16021-00-00 - Data contained in this specification is subject to change without notice Material Ambient temp. range Right Hand Circular (RHCP) N Male or Female Brass nickel plated Fiberglass -40°C +80°C Radiation pattern www.SOLEXY.net Polarization Connector HEAVY DUTY ANTENNA GPS ANH SERIES ANHA Receiving Frequency ANHB 1575.42 MHz GPS / GLONASS Systems 15 MHz 50Ω 1.5 4.50 dBic RHCP -10dB Bandwidth Impedance VSWR Gain (@ Zenith) Polarization Frequency Temperature Coefficient Center Frequency 1621 MHz IRIDIUM Systems 9 MHz 50Ω 1.5 4.00 dBic RHCP -10dB Bandwidth Impedance VSWR Gain (@ Zenith) Polarization Frequency Temperature Coefficient 20 ppm/°C 20 ppm/°C DIMENSIONAL DRAWING 1.77 [45.00mm] ANHAA-_NSI ANHBA-_NSI 1.77 [45.00mm] ANHAA-CNRI ANHBA-CNRI 3.94 [100.00mm] 3.94 [100.00mm] 1.97 [50.00mm] NOMENCLATURE ANH A A a SOLEXY SRL - C N S E b a Frequency / System A B 1575.42 MHz / GPS-GLONASS 1621 MHz / IRIDIUM b Antenna connection 3 C N Female N Male c Antenna mounting S R Straight (vertical) Elbow (90°, only N Male connector) c Via Enrico Fermi, 2 25015 Desenzano del Garda (BS) Italy Phone (+39) 030 787.0.787 | [email protected] www.solexy.net SOLEXY USA, LLC 10168 International Blvd. Cincinnati (OH) 45246 USA Phone (+1) 513.860.5465 | [email protected] ANTENNA COUPLER AW SERIES Solexy’s Weather-Proof Antenna Coupler permits the installation of passive antennas in outdoor and hose down areas. This coupler is designed to be used directly with any weatherproof (IP67, Nema 4, or 4X) housings or conduit fittings. An internal epoxy encapsulate ensures no moisture ingression from the external environment. The coupler’s robust design allows for connection to practically any radio and antenna. It is a highly flexible and cost effective solution to environmentally challenging radio installations. FEATURES Environmental Protection 300 series stainless steel construction or nickel plated brass and integral potting protects electronics from corrosive environments. Flexibility Permits a wide variety of passive antennas to be installed. Antenna Connection Type N female, RP-SMA female, BNC female or TNC female connection available for antenna connection. Radio Connection Most all 50 Ω connections are available (see ordering guide) Housing Connection Rugged 3/4” npt-m, 1/2” npt-m, M25x1,5 or M20x1.5 external threads are available for connection into housing or enclosure. Approximate weight 0.09 kg Housing material 300 Series Stainless Steel Ambient Temperature Range -40°C +85°C Rating IP67, Nema 4, 4X Maximum Wattage 10 W Frequency Range 100 MHz to 6 GHz Impedance 50 Ω Approximate Signal Attenuation (1) Frequency (2) AWF AWN AWB AWT 169 MHz 0.3 dB 0.3 dB 0.3 dB 0.3 dB 425 MHz 0.3 dB 0.3 dB 0.3 dB 0.3 dB 915 MHz 0.4 dB 0.6 dB 0.4 dB 0.4 dB 2.4 GHz 0.3 dB 0.5 dB 0.3 dB 0.3 dB 5.8 GHz 0.8 dB 0.9 dB 0.8 dB 0.8 dB Values shown for 18” (457 mm) coaxial cable and standard RP-SMA connectors (no adapter) www.SOLEXY.net B13006-00-02 - Data contained in this specification is subject to change without notice SPECIFICATION ANTENNA COUPLER AW SERIES DIMENSIONAL DRAWING 1/2-14 NPT or M20x1.5 CHOICE OF RADIO CONNECTION 3/4-14 NPT or M25x1.5 RP-SMA (FEMALE) CONNECTOR RP-SMA (FEMALE) CONNECTOR AWF 0.25 [6.4mm] 18.00 (MAX) [457.2mm] 1.00 [25.4mm] 0.21 [5.3mm] 1.00 [25.4mm] AWB 0.65 [16.5mm] 0.21 [5.3mm] TNC (FEMALE) CONNECTOR BNC (FEMALE) CONNECTOR N (FEMALE) CONNECTOR AWN 0.25 [6.4mm] AWT 0.48 [12.2mm] 0.48 [12.2mm] 0.88 [22.4mm] NOMENCLATURE _____ ___ aaa b aaa b SOLEXY SRL S 01 06 ____ ____ cc dd Antenna Coupler AWF Antenna coupler with RP-SMA Female antenna connection AWN Antenna coupler with N Female antenna connection AWB Antenna coupler with BNC Female antenna connection AWT AAntenna coupler with TNC Female antenna connection cc Coaxial Connector ** see ordering guide dd Coax cable length 06 6“ (152.4 mm) 12 12“ (304.8 mm) 18 18“ (457.2 mm) 24 24“ (609.6 mm) Thread Connection 2 1/2” NPT male 3 3/4“ NPT male M M25x1.5 T M20x1.5 Via Enrico Fermi, 2 25015 Desenzano del Garda (BS) Italy Phone (+39) 030 787.0.787 | [email protected] www.solexy.net SOLEXY USA, LLC 10168 International Blvd. Cincinnati (OH) 45246 USA Phone (+1) 513.860.5465 | [email protected] www.SOLEXY.net AWF 3 COAX CABLE EXTENSION NOMENCLATURE a Coax cable type A RG-316 bb cc RF Connector Coupler Side RF Connector Radio Side see below A 01 03 dd RF CONNECTOR COUPLER SIDE (bb) 01 03 06 ___ ___ ____ ____ a bb cc dd RF CONNECTOR RADIO SIDE (cc) RP-SMA Male SMA Male B16017-00-01 - Data contained in this specification is subject to change without notice dd SOLEXY SRL Via Enrico Fermi, 2 25015 Desenzano del Garda (BS) Italy Phone (+39) 030 787.0.787 | [email protected] www.solexy.net Coax cable length 06 06“ (15 cm) 12 12“ (30 cm) 18 18“ (45 cm) 24 24“ (60 cm) 30 30“ (75 cm) SOLEXY USA, LLC 01 02 03 04 07 08 09 10 11 12 13 15 16 18 19 21 23 24 29 RP-SMA Male RP-SMA Female SMA Male SMA Female N Male N Female TNC Male TNC Female BNC Male BNC Female MCX Jack Male 90° MMCX Jack Male 90° RP-SMA Male 90° SMA Male 90° SMB Jack Male RP-TNC Male SMB Plug Female U.FL Plug Female N Female bulkehead 10168 International Blvd. Cincinnati (OH) 45246 USA Phone (+1) 513.860.5465 | [email protected] www.SOLEXY.net PT ETHERNET COUPLER BXF & BAF SERIES B13002-00-05 - Data contained in this specification is subject to change without notice FEATURES No Sealing Fitting Required Fitting is pre-approved for hazardous locations and can be installed with no potting compounds and a simple wrench. Eliminates the need for costly seal fittings, and reduces the chance of error associated with field installed sealing practices. Corrosion Resistant 300 series stainless steel of BXF series protects the fitting from corrosive environments, sealing fittings are typically constructed of aluminium or galvanized steel, neither being well suited for the process industry. Environmental Protection All required circuitry is recessed into fitting and encapsulated against harsh environments; this is impossible with conventional sealing methods. Interchangeability Ethernet cables can be connected/disconnected without powering down the system, and can be run in traditional cable trays. Industrial M12 “D” connection With this secure weather proof industrial connection, cable installation and removal can be accomplished without removing power. www.SOLEXY.net Solexy’s patented (7,507,105) Explosion-Proof / Intrinsically Safe Ethernet Coupler allows for transmissions of Ethernet into hazardous areas with a standard RJ45 connector. With the Solexy Ethernet coupler it’s possible to connect any standard ethernet device located in a classified or safe area. The BXF explosion proof and intrinsically safe barrier is certified for installation in classified areas and BAF intrinsically safe barrier is suitable for installation in safe areas and purged systems. The BXF is designed to be used with any UL, CSA, MSHA, ATEX or IECEx listed explosion proof housing without the need of a seal fitting, taking up no internal space. The BAF is designed to be used in safe area directly with any CAT5 or CAT5e cable system. The BAF can also be remote mounted up to 70 meters away with minimal loss of signal. The BAF is also designed to be used with air purge panel systems. A BXF and/or BAF coupler is required on each end of a cable installation for full protection of both the RX and TX lines. ETHERNET COUPLER BXF & BAF SERIES SPECIFICATIONS IECEx / ATEX Certification: BAF I (M1) [Ex ia Ma] I II (1) G [Ex ia Ga] IIC II (1) D [Ex ia Da] IIIC BXF3S & BXFMS I M2 (M1) Ex d mb [ia Ma] I Mb II 2 (1) G Ex d mb [ia Ga] IIC T5 Gb II 2 (1) D Ex mb [ia Da] IIIC T100°C Db ATEX certificate nr. DNV 14 ATEX 4192X IECEx certificate nr. IECEx DNV 14.0024X CULUS Certification: BAF3S & BXF3S Class I, Group A,B,C,D, Class II, Group F,G (UL File nr. E305231) Maximum Fault Voltage Current Protection Frequency Range Insertion loss Total impedance Protection Ambient Temperature Range Ethernet connection Data connector (hazardous side) Housing Material RMS 250 V 50 mA up to 100 MHz -5.5 dB < 100 Ohm 3.6 V -20°C +60°C IEEE 802.3 - 100BaseTX - 100 Mbps M12 Industrial “D” coded connector BXF = 300 SST (approximate weight 0.38 kg) BAF = T6 Aluminum nickel plated (approximate weight 0.2 kg) INSTALLATION SCHEMES A BXF Coupler must be used at either end of the Ethernet cable to ensure the safety of this system. The BXF must be securely mounted and grounded within a UL/CSA, MSHA or ATEX/IECEx approved explosion proof enclosure. ground enclosure connect to ground ground enclosure HAZARDOUS AREA NON-HAZARDOUS AREA connect to Ethernet compatible terminal or HUB APPROVED HOUSING FOR HAZARDOUS AREA Model BXF NON-HAZARDOUS AREA Model BXF CAT5/5e Industrial Ethernet cable with D-Coded M12 male connection Max length 70 m (229 ft) CABLE CONFIGURATION Connection Terminal to HUB Terminal to terminal HUB to HUB Cable Standard Crossover Crosssover connect to ground connect to Ethernet compatible terminal or HUB APPROVED HOUSING FOR HAZARDOUS AREA www.SOLEXY.net DEVICES INSTALLED IN A CLASSIFIED AREA ETHERNET COUPLER BXF & BAF SERIES DEVICES INSTALLED IN BOTH A CLASSIFIED AND A SAFE AREA One BAF and one BXF Coupler must be used at opposite ends of the Ethernet cable to ensure the safety of this system. The BXF must be securely mounted and grounded within a UL/CSA, MSHA or ATEX/IECEx approved explosion proof enclosure. HAZARDOUS AREA NON-HAZARDOUS AREA ground enclosure connect to ground connect to ground NON-HAZARDOUS AREA connect to ground Model BXF connect to Ethernet compatible terminal or HUB Model BAF CAT5/5e Industrial Ethernet cable with D-Coded M12 male connection connect to Ethernet compatible terminal or HUB Max length 70 m (229 ft) APPROVED HOUSING FOR HAZARDOUS AREA CABLE CONFIGURATION Connection Terminal to HUB Terminal to terminal HUB to HUB Cable Standard Crossover Crosssover DEVICES INSTALLED IN A SAFE AREA (CABLE IN A CLASSIFIED AREA) NON-HAZARDOUS AREA HAZARDOUS AREA NON-HAZARDOUS AREA connect to ground connect to ground connect to ground connect to Ethernet compatible terminal or HUB connect to ground Model BAF CAT5/5e Industrial Ethernet cable with D-Coded M12 male connection Max length 70 m (229 ft) CABLE CONFIGURATION Connection Terminal to HUB Terminal to terminal HUB to HUB Cable Standard Crossover Crosssover Model BAF connect to Ethernet compatible terminal or HUB www.SOLEXY.net A BAF Coupler must be used at either end of the Ethernet cable to ensure the safety of this system. ETHERNET COUPLER BXF & BAF SERIES DIMENSIONAL DRAWINGS 11.00 [279.4mm] 1.25 [31.8mm] (flats) 2.63 [66.7mm] BXF 18.00 (standard) [457.2mm] Ø1.38 [Ø34.9mm] 3.58 [90.8mm] IECEx/ATEX/UL 3.70 [94.0mm] MSHA 11.00 [279.4mm] 3.06 [77.8mm] 1.25 [31.8mm] BAF 18.00 (standard) [457.2mm] Ø1.38 [Ø34.9mm] 3.56 [90.5mm] NOMENCLATURE 3 _____ ___ aaa b aaa b c S ___ c 01 01 ____ dd N ____ ee ___ f 018 ______ ggg dd Housing Connector 01 Shielded M12 Female “D” coded ee Thread Connection 3 3/4” NPT (available only for cULus, IECEx and Atex) M M25x1.5 (IECEx and Atex only) S 1 1/8”-12 UNF (MSHA only) Cable Connector 01 RJ45 Plug Male 02 Shielded M12 Male “D” coded 03 Shielded M12 Female “D” coded f Housing Material A Aluminum T6 Nickel Plated (BAF only) S 300 series stainless steel (BXF only) Approval N cULus X IECEx and ATEX M MSHA ggg Cable Length 018 18” (457 mm) CAT5e (included in the 70 meters max) *** to be defined Barrier Type BXF Explosion Proof / Intrinsically Safe suitable for classified area BAF Intrinsically Safe suitable for safe area and UL purge panels SOLEXY SRL Via Enrico Fermi, 2 25015 Desenzano del Garda (BS) Italy Phone (+39) 030 787.0.787 | [email protected] www.solexy.net SOLEXY USA, LLC 10168 International Blvd. Cincinnati (OH) 45246 USA Phone (+1) 513.860.5465 | [email protected] www.SOLEXY.net BXF EXPLOSION PROOF ENCLOSURE WA & WS SERIES FEATURES WA series made in alluminum polyester powder coated (black as standard, other colour available on request) WS series made in electropolish stainless steel AISI 316 (CF8M) Water proof IP66 / IP68 (ATEX and IECEx version) or Nema 4, 4X (UL version) Up to four cable entries M20x1,5 and M25x1,5 (ATEX and IECEx version only) or 1/2” npt-f, 3/4” npt-f Temperature range from -60°C to +105°C (ATEX and IECEx version) or +80°C (UL version) Atex and IECEx certified II 2G Ex d IIC T6...T4 Gb II 2D Ex tb IIIC T110°C / T110°C / T140°C I M2 Ex d I Mb (WS only) (certification specifically for radio and electronic apparatus) UL certified for Class I Group B, C, D and Class II Group E, F, G (certified as junction box complete up to 24 terminals) NOMENCLATURE UL version ATEX IECEx version H WA 00000 - 41 0 X1 B15011-00-02 - Data contained in this specification is subject to change without notice ____ __ ___ __ __ a b c d e _____ a ___ b ___ c a Enclosure Series WA Aluminum polyester powder coated WS Stainless steel AISI 316 (CF8M) a Enclosure Series WA Aluminum polyester powder coated WS Stainless steel AISI 316 (CF8M) b Mounting plate inside 0 no mounting plate 1 mouning plate b c Number of terminals 00 no terminals 1 ... 24 from 1 to 24 d Colour A Cable entries 21 n° 2 1/2” npt-f 22 n° 2 3/4“ npt-f 23 n° 2 M20x1.5 24 n° 2 M25x1.5 41 n° 4 1/2” npt-f 42 n° 4 3/4” npt-f 43 n° 4 M20x1.5 44 n° 4 M25x1.5 e Cable entry E n° 2 1/2” npt-f F n° 4 1/2” npt-f G n° 2 3/4” npt-f H n° 4 3/4” npt-f c Approval X1 IECEx and ATEX Gas and Dust (WA only) X2 IECEx and ATEX Gas, Dust and Mining (WS only) black www.SOLEXY.net WA 0 00 A E EXPLOSION PROOF ENCLOSURE WA & WS SERIES WA DIMENSIONAL DRAWING 58.0 [2.28 in] 89.5 [3.52 in] 13.5 [.53 in] 62.0 [2.44 in] A 8.0 [.31 in] A 8.0 [.31 in] 66.0 [2.60 in] 179.8 [7.08 in] 3 cable entry 79.5 [ .13 in] 13.5 [.53 in] cable entry cable entry 43.8 [1.72 in] M4x0.7 - 6H X 12 cable entry 46.0 [1.81 in] 74.0 [2.91 in] 180.0 [7.09 in] ENCLOSURE WITH COVER OUT 133.0 [5.24 in] 51.8 [2.04 in] 123.7 [4.872 in] SECTION A-A WS DIMENSIONAL DRAWING 90.0 [3.54 in] 196.0 [7.72 in] 58.0 [2.28 in] 13.5 [.53 in] M4x0.7 - 6H X 12 cable entry 46.0 [1.81 in] ENCLOSURE WITH COVER OUT 135.8 [5.35 in] 56.0 [2.20 in] 63.8 [2.51 in] 125.6 [4.95 in] SECTION A-A SOLEXY SRL Via Enrico Fermi, 2 25015 Desenzano del Garda (BS) Italy Phone (+39) 030 787.0.787 | [email protected] www.solexy.net SOLEXY USA, LLC 10168 International Blvd. Cincinnati (OH) 45246 USA Phone (+1) 513.860.5465 | [email protected] www.SOLEXY.net 8.0 [.31 in] cable entry 74.0 [2.91 in] 62.0 [2.44 in] 79.5 [3.13 in] A 66.0 [2.60 in] 180.5 [7.11 in] A 8.0 [.31 in] 13.5 [.53 in] cable entry cable entry EXPLOSION PROOF VHF & UHF RADIOMODEMS Solexy radiomodem is a VHF/UHF simplex/half-duplex high quality radiomodem operating on 12,5 kHz or 25 kHz channels available in 169 MHz, 433 MHz and 868 MHz band in accordance with European Decision 2005/928/CE. These products were developed as a free use device. Solexy radiomodems are supplied complete with a RS232 / RS485 interface, optoisolated input and relay outputt installed in our explosion proof housing WA and WS series that allows a serial data transmission in classified area Ex. Solexy radiomodems are fully transparent to the user and configurable from the PC by means of a dedicated software for the desired functions. Low power Low poewer consumption in both RX and TX mode with selectable power saving mode by software and on/off switching controlled via DTR criteria Store and Forward Store & Forward mode with 448 byte maximum buffer size Adaptive Frequency Agility Adaptive Frequency Agility on 2 or 3 channels Software configuration Complete configuration by means of a PC through dedicated software Advanced Protocol Point to point, Point to Multipoint, Broadcasting mode or Adresses management, Adresses stored in configuration or from DTE, Digipeater mode, Remote configuration through radio network, Adresses reversing for the answer, Echo function Transparent Serial transmission data plus extra digital input / output Serial trasmission RS232 or RS485 transparent to the user plus optoisolated input and relay output may be used for alarms and/or actuation Heavy duty construstion Explosion proof Ex d IIC enclosure made in alluminum (WA series) or stainless steel (WS series) weather proof IP66/68 B14007-00-03 - Data contained in this specification is subject to change without notice RS232 / RS485 plus Digital Input and Relay Output RS232 / RS485 plus Digital Input and Relay Output www.SOLEXY.net FEATURES EXPLOSION PROOF VHF & UHF RADIOMODEMS SPECIFICATIONS Canalization Modulation Radio data rate (Tx/Rx) Frequency stability Supply voltage Rx consumption (@12 VDC) Tx consumption (@12 VDC) DTR OFF consumption Reference directive Relay output rating Digital input 310 320 340 169.400 MHz 433.0875 MHz 868.000 MHz 169.475 MHz 434.7375 MHz 870.000 MHz 12.5 or 25 kHz 9K00F1D or 18K0F1D 4800 bps @ 12.5 kHz or 9600 bps @ 25 kHz ±2 ppm ± 2 ppm ± 1 ppm 9-32 VDC with limited source power ≈ 30 mA (RS232/485 relè off) ≈ 170 mA ≈ 70 mA ≈ 75 mA < 920µA@32VDC EN 300 220-1/2 v.2.3.1 [email protected] o 32VDC@1A (normaly Open) 5-24VDC o 3.5-20VAC ZINP 2.2 kΩ (optoisolated) TRANSMITTER Output power Frequency deviations 200 mW 10 mW 5/10/25 mW ± 1.8 kHz @ 12.5 kHz ± 3.6 kHz @ 25 kHz Output power stability ± 1.5 dB Power and power transitory on adjacent channel compliant to EN 300 220-1 v.2.3.1 RECEIVER CLASS 2 - LBT and AGILITY Sensibility @ BER < 10-2 12.5 kHz < -110 dBm < -110 dBm < -110 dBm 25 kHz < -107 dBm < -107 dBm < -107 dBm Adjacent channel attenuation and blocking compliant to EN 300 220-1 v.2.3.1 INTERFACE Data rate Data format Operative modality RS232 and RS485 from 1200 to 38400 bps Asyncrhronous 8,N,1 - 8,E,1 - 8,O,1 - 7,E,1 - 7,O,1 - T,N,2 Simplex or half-duplex Ambient temp. range WA series WS series -30°C +72°C -30°C +70°C Housign material die cast aluminium polyester powder coated AISI 316 (CF8M) electropolished WA series WS series -30°C +74°C -30°C +73°C -30°C +74°C -30°C +72°C APPROVAL ATEX / IECEx Certification II 2 (1) G Ex db mb [ia Ga] IIA/IIB/IIC T6 Gb II 2 (1) D Ex mb tb [ia Da] IIIC T85°C Db I M2 (M1) Ex db mb [ia Ma] I Mb (WS only) 341 868.000 MHz 869.650 MHz ± 1 ppm ≈ 300 mA 25/150/500 mW < -110 dBm < -110 dBm -30°C +70°C -30°C +65°C www.SOLEXY.net GENERAL Operating band EXPLOSION PROOF VHF & UHF RADIOMODEMS NOMENCLATURE S WA 310 01 - 42 0 X3 _____ ___ a b a Enclosure WA Aluminum polyester powder coated WS Stainless steel AISI 316 (CF8M) electropolish b Device 310 Radiomodem VHF 169 MHz, 200 mW RF power output 320 Radiomodem UHF 433 MHz, 10 mW RF power output 340 Radiomodem UHF 868 MHz, 200 mW RF power output 341 Radiomodem UHF 868 MHz, 200 mW RF power output ___ c ____ d ____ e c Antenna coupler 01 n° 1 AXN series 02 n° 1 AXF series d Cable entries 42 n° 4 3/4” npt-f (one used for antenna coupler) 44 n° 4 M25x1.5 (one used for antenna coupler) e Approval X3 IECEx and ATEX Gas and Dust (WA only) X4 IECEx and ATEX Gas, Dust and Mining (WS only) DIMENSIONAL DRAWINGS Cable entries (npt or metric) 3.661” [93 mm] 1.968” [50 mm] M8x1.25 - 6H Cable entry (npt or metric) M6x1 - 6H 3.937” [100 mm] 7.716” [196 mm] SOLEXY SRL Via Enrico Fermi, 2 25015 Desenzano del Garda (BS) Italy Phone (+39) 030 787.0.787 | [email protected] www.solexy.net SOLEXY USA, LLC 10168 International Blvd. Cincinnati (OH) 45246 USA Phone (+1) 513.860.5465 | [email protected] www.SOLEXY.net 7.125” [181 mm] SOLEXY ANTENNA COUPLER FOR ANTENNA CONNECTION EXPLOSION PROOF MODBUS RTU RADIOMODEMS The Solexy MODBUS RTU radiomodem is a VHF/UHF high quality 500 mW radiomodem operating on 12,5 / 25 kHz channels available in 169 MHz and 868 MHz band in according to European Decision 2005/928/CE. These products are develop in order to be a free use device. The Solexy MODBUS RTU radiomodems are supply complete with 4 digital input, 2 digital output plus 2 analog input and 2 analog output 4-20 mA that allows to has an Modbus RTU nodle. The RS485 interface permit also the connection up to 4 Modbus module. The WA and WS anclosure thanks to its rugged construction combined to Atex and IECEx certificate achieves to have an Modbus RTU data transmission in classified area Ex. FEATURES Modbus RTU The Solexy MODBUS RTU radiomodem can be used on all Modbus RTU application Wide range of transmission option Mirror (point to point), Modbus RTU, Modbus multi master and standard Radiomodem option completely transparent to the user also in case of complex route Modbus RTU Nodle 4 PNP digital input combinet to 2 relay output plus 2 analg input and 2 optoisolated analog output 4-20 mA allows to use the radiomodem as a complete Modbus Low power Low power consumption in both RX and TX mode and bistable relay on digital output allows the Solexy radiomodem suitable to battery operation Adaptive Frequency Agility Adaptive Frequency Agility on 2 or 3 channels Software configuration Complete configuration by PC through dedicated software Encryption transmission data Secure transmission data thanks to AES (Advanced Encryption Standard) at 128 bit Heavy duty construstion Explosion proof Ex d IIC enclosure made in alluminum (WA series) or stainless steel (WS series) weather proof IP66/68 Modbus 4 digital IN 2 digital OUT 2 analog IN 4-20 mA 2 analog OUT 4-20 mA RS485 Modbus RTU port 4 digital IN 2 digital OUT 2 analog IN 4-20 mA 2 analog OUT 4-20 mA RS485 Modbus RTU port www.SOLEXY.net B14008-00-03 - Data contained in this specification is subject to change without notice RTU nodle. EXPLOSION PROOF MODBUS RTU RADIOMODEMS SPECIFICATIONS GENERAL Operating band Canalization Modulation Radio data rate (Tx/Rx) Frequency stability Supply voltage Rx consumption (@12 VDC) Tx consumption (@12 VDC) Sleep consumption Reference directive Digital outputs rating Digital inputs Digital counter Analog inputs Analog outputs 510 540 169.400 MHz 868.000 MHz 169.475 MHz 869.650 MHz 12.5 | 25 | 50 kHz 25 | 50 kHz 9K00F1D or 18K0F1D 4800 bps @ 12.5 kHz | 9600 bps @ 25 kHz | 19200 bps @ 50 kHz ±2 ppm ± 1 ppm 9-32 VDC with limited source power 3.3 - 4.8 battery operated ≈ 30 mA (RS232/485 relè off) max 270 mA < 10 µA EN 300 220-1/2 v.2.3.1 n° 2 [email protected] o 32VDC@1A (normaly Open) n° 4 PNP n° 1 PNP (max frequency input 10 Hz) n° 2 4-20 mA n° 2 4-20 mA TRANSMITTER Output power Frequency deviations RECEIVER CLASS 2 - LBT and AGILITY -2 Sensibility @ BER < 10 12.5 kHz < -110 dBm 25 kHz < -107 dBm < -107 dBm 50 kHz < -105 dBm < -105 dBm Adjacent channel attenuation and blocking compliant to EN 300 220-1 v.2.3.1 INTERFACE Data rate Data format Operative modality RS232 and RS485 from 1200 to 38400 bps Asyncrhronous 8,N,1 - 8,E,1 - 8,O,1 - 7,E,1 - 7,O,1 - T,N,2 Simplex or half-duplex Ambient temperature range Housign material WA series -30°C +70°C | WS series -30°C +65°C WA series : die cast aluminium polyester powder coated WS series: AISI 316 (CF8M) electropolished APPROVAL ATEX / IECEx Certification II 2 (1) G Ex db mb [ia Ga] IIA/IIB/IIC T6 Gb II 2 (1) D Ex mb tb [ia Da] IIIC T85°C Db I M2 (M1) Ex db mb [ia Ma] I Mb (WS only) www.SOLEXY.net 50/150/500 mW 25/150/500 mW ± 1.8 kHz @ 12.5 kHz ± 3.6 kHz @ 25 kHz Output power stability ± 1.5 dB Power and power transitory on adjacent channel compliant to EN 300 220-1 v.2.3.1 EXPLOSION PROOF MODBUS RTU RADIOMODEMS NOMENCLATURE S WA 510 01 - 42 0 X3 _____ ___ a b ___ c a Enclosure WA Aluminum polyester powder coated WS Stainless steel AISI 316 (CF8M) electropolish b Device 510 Modbus RTU Radiomodem VHF 169 MHz, 500 mW RF power output 540 Modbus RTU Radiomodem UHF 868 MHz, 500 mW RF power output c Antenna coupler 01 n° 1 AXN series 02 n° 1 AXF series ____ d ____ e d Cable entries 42 n° 4 3/4” npt-f (one used for antenna coupler) 44 n° 4 M25x1.5 (one used for antenna coupler) e Approval X3 IECEx and ATEX Gas and Dust (WA only) X4 IECEx and ATEX Gas, Dust and Mining (WS only) DIMENSIONAL DRAWINGS Cable entries (npt or metric) 3.661” [93 mm] 1.968” [50 mm] M8x1.25 - 6H Cable entry (npt or metric) M6x1 - 6H 3.937” [100 mm] 7.716” [196 mm] SOLEXY SRL Via Enrico Fermi, 2 25015 Desenzano del Garda (BS) Italy Phone (+39) 030 787.0.787 | [email protected] www.solexy.net SOLEXY USA, LLC 10168 International Blvd. Cincinnati (OH) 45246 USA Phone (+1) 513.860.5465 | [email protected] www.SOLEXY.net 7.125” [181 mm] SOLEXY ANTENNA COUPLER FOR ANTENNA CONNECTION EXPLOSION PROOF ROUTER WiFi ACCESS POINT The Solexy Router / WiFi access point is a cost effective multipurpose solution for a wide range of wireless applications. Supporting GPRS/EDGE/UMTS/HSPA+/LTE making it possible for a user seeking an easy and fast mobile internet access. The internet connection is easily available and configurable via an internet browser without any need of installing software or drivers for the device. Available with different modems and options such as Wi-Fi, dual sim, GPS receiver is an unique solution for M2M and mobile data applications (M2MCloud & M2MAir ready). With Solexy’s WA and WS enclosures and their rugged construction combined with Atex and IECEx certificates, Solexy offers a wireless device solution for installation in classified Ex areas (gas, dust and mining). FEATURES Operating Functions WiFi access point (Wifi to LAN or WiFi to 3G/LTE/HSPA+) WiFi client (LAN to WiFi) 3G/LTE/HSPA+ client (LAN to 3G/LTE/HSPA+) Serial (232-485) to 3G/LTE/HSPA+ Serial (232-485) to LAN Operating frequency Up to quad band 800/850 , 900 , AWS 1700 , 1900 , 2100 Advanced RS-232/485-TCP/UDP forwarding, ModBus gateway, NTRIP, SMS server, NTP server Management DCHP (client/server), IEEE 802.1Q tagging, IPsec, OpenVPN, Firewall, NAT, PAT, DDNS, CARP, Static routing, Access Control, Syslog Option GPS receiver Dual sim B14009-00-05 - Data contained in this specification is subject to change without notice Heavy duty construction Explosion proof Ex d IIC enclosure made of alluminum (WA series) or stainless steel (WS series) weather proof IP66/68 3G/LTE/HSPA+ WiFi www.SOLEXY.net (Telit cellular module) according to modem feature EXPLOSION PROOF ROUTER WiFi ACCESS POINTS SPECIFICATIONS GENERAL Power supply Power consumption 6-30VDC 5W HARDWARE CPU Internal memory RS Interface LAN ARM9 450 MHz 128 MB RAM RS232 or RS485 via RJ45 connector Ethernet 100 Mbps U version L version H version Supported bands GSM 900 Class 4 (2W), DCS 1800 Class 1 (1W), EDGE 900MHz Class E2 (0.5W), EDGE 1800MHz Class E2 (0.4W) plus: H version WCDMA FDD B1, B2, B4, B5, B8 Class 3 (0.25W) U version WCDMA FDD B1, B8 Class 3 (0.25W) L version WCDMA FDD B1, B5, B8 Class 3 (0.25W), LTE FDD B3, B7,B20 Class 3 (0.2W) Data features HSPA+ (downlink 21 Mbit/s, uplink 5,76 Mbit/s) UMTS (downlink 7,2 Mbit/s, uplink 5,76 Mbit/s) EDGE (Multi-slot class 10, max BR downlink 236,8 Kb/s) GPRS (Multi-slot class 10, max BR downlink 85,6 Kb/s) CSD (Max BR 14,4 Kb/s) Embedded protocols TCP/IP, UDP/IP, SSL, HTTP, HTTPS, FTP, SMTP, POP3, IBM MQTT Class B GSM 07.10 multiplexing protocol WiFi 802.11 b/g/n, 802.3, 802.3u, data rate up to 150 Mbps Up to 8 simultaneuos connection SOFTWARE Management UMTS 7.2 / 5.76 Mbps LTE 100 / 50 Mbps HSPA+ 21 / 5.76 Mbps Advanced DHCP (client/server), IEEE 802.1Q tagging, IPsec, OpenVPN, Firewall, NAT, PAT, DDNS, CARP, Static routing, Access control, Syslog RS-232/485-TCP/UDP forwarding, ModBus gateway, NTRIP, SMS server, NTP Ambient temp. range WA series -20°C +68°C | WS series -20°C +61°C APPROVAL ATEX / IECEx Certification II 2 (1) G Ex db mb [ia Ga] IIA/IIB/IIC T6 Gb II 2 (1) D Ex mb tb [ia Da] IIIC T85°C Db I M2 (M1) Ex db mb [ia Ma] I Mb (WS only) www.SOLEXY.net Network connection EXPLOSION PROOF ROUTER WiFi ACCESS POINT NOMENCLATURE S WA H 2 1 11 - 42 0 X4 _____ __ __ __ ___ a b c d e a Enclosure WA Aluminum polyester powder coated WS Stainless steel AISI 316 (CF8M) electropolish b Device U 3G L LTE (1) M LTE (1) (2) H HSPA+ G HSPA+ (2) c Sim slot 1 Single sim 2 Dual sim d Interface 0 Cellular, Serial, LAN 1 Cellular, WiFi, Serial, LAN NOTE (1) (2) (3) Approved for use in European Union only RF low power device suitable for use in IIC gas group Antenna not included ___ f ___ g e Antenna coupler (3) 01 n° 1 AXN series (N Female) 11 n° 2 AXN series (N Female) 02 n° 1 AXF series (RP-SMA Female) 22 n° 2 AXF series (RP-SMA Female) 12 n° 1 AXF (RP-SMA Female) + n° 1 AXN (N Female) f Cable entries 42 n° 4 3/4” npt-f (one used for antenna coupler) 44 n° 4 M25x1.5 (one used for antenna coupler) g Approval X3 IECEx & ATEX Dust and IIC Gas Group (WA with M and G device only) X4 IECEx & ATEX Mining, Dust and IIC Gas Group (WS with M and G device only) X5 IECEx & ATEX Dust and and IIB Gas Group (WA with U, L, H device only) X6 IECEx & ATEX Mining, Dust and IIB Gas Group (WS with U, L, H device only) 3.661” [93 mm] 9.29” [236 mm] 1.968” [50 mm] M8x1.25 - 6H Cable entries (npt or metric) M6x1 - 6H 7.716” [196 mm] SOLEXY SRL Via Enrico Fermi, 2 25015 Desenzano del Garda (BS) Italy Phone (+39) 030 787.0.787 | [email protected] www.solexy.net SOLEXY USA, LLC 10168 International Blvd. Cincinnati (OH) 45246 USA Phone (+1) 513.860.5465 | [email protected] 3.937” [100 mm] SOLEXY ANTENNA COUPLER FOR ANTENNA CONNECTION www.SOLEXY.net DIMENSIONAL DRAWINGS EXPLOSION PROOF WiFi ACCESS POINT The SolexyWiFi access point is a cost effective multipurpose solution for a wide range of wireless applications. An internet connection is easily available and configurable via an internet browser without the need of installing software or drivers for the device. With Solexy’s WA and WS enclosures and their rugged construction combined with Atex and IECEx certificates, Solexy offers a wireless device solution for installation in classified Ex areas (gas, dust and mining). FEATURES Operating Functions WiFi access point (Wifi to LAN) WiFi client (LAN to WiFi) Serial (232-485) to LAN WiFi 802.11 b/g/n, 802.3, 802.3u, Data rate up to 150 Mbps Connection up to 8 simultaneuos Advanced RS-232/485-TCP/UDP forwarding, ModBus gateway, NTRIP, NTP server Management DCHP (client/server), IEEE 802.1Q tagging, IPsec, OpenVPN, Firewall, NAT, PAT, DDNS, CARP, Static routing, Access Control, Syslog Option GPS receiver Heavy duty construction Explosion proof Ex d IIC enclosure made of alluminum (WA series) or stainless steel (WS series) weather proof IP66/68 B16018-00-01 - Data contained in this specification is subject to change without notice GENERAL Power supply Power consumption HARDWARE CPU Internal memory RS Interface LAN WiFi SOFTWARE Management 6-30VDC 5W ARM9 450 MHz 128 MB RAM RS232 or RS485 via RJ45 connector Ethernet 100 Mbps 802.11 b/g/n, 802.3, 802.3u, data rate up to 150 Mbps Up to 8 simultaneuos connection Advanced DHCP (client/server), IEEE 802.1Q tagging, IPsec, OpenVPN, Firewall, NAT, PAT, DDNS, CARP, Static routing, Access control, Syslog RS-232/485-TCP/UDP forwarding, ModBus gateway, NTRIP, NTP. Ambient temp. range WA series -20°C +68°C | WS series -20°C +61°C www.SOLEXY.net SPECIFICATIONS EXPLOSION PROOF WiFi ACCESS POINT APPROVAL ATEX / IECEx Certification II 2 (1) G Ex db mb [ia Ga] IIA/IIB/IIC T6 Gb II 2 (1) D Ex mb tb [ia Da] IIIC T85°C Db I M2 (M1) Ex db mb [ia Ma] I Mb (WS only) NOMENCLATURE S WA U0 4 10 - 42 0 X4 _____ a __ __ b c a Enclosure WA Aluminum polyester powder coated WS Stainless steel AISI 316 (CF8M) electropolish b Interface 4 WiFi, Serial, LAN 5 WiFi, Serial, LAN, GPS c Antenna coupler (1) 01 n° 1 AXN series (N Female) 11 n° 2 AXN series (N Female) 02 n° 1 AXF series (RP-SMA Female) 22 n° 2 AXF series (RP-SMA Female) 12 n° 1 AXF (RP-SMA Female) + n° 1 AXN (N Female) ___ d ___ e d Cable entries 42 n° 4 3/4” npt-f (one used for antenna coupler) 44 n° 4 M25x1.5 (one used for antenna coupler) e Approval X3 IECEx and ATEX Gas and Dust (WA only) X4 IECEx and ATEX Gas, Dust and Mining (WS only) NOTE: (1) Antenna not included 3.661” [93 mm] 9.29” [236 mm] 1.968” [50 mm] M8x1.25 - 6H Cable entries (npt or metric) 3.937” [100 mm] SOLEXY ANTENNA COUPLER FOR ANTENNA CONNECTION M6x1 - 6H 7.716” [196 mm] SOLEXY SRL Via Enrico Fermi, 2 25015 Desenzano del Garda (BS) Italy Phone (+39) 030 787.0.787 | [email protected] www.solexy.net SOLEXY USA, LLC 10168 International Blvd. Cincinnati (OH) 45246 USA Phone (+1) 513.860.5465 | [email protected] www.SOLEXY.net DIMENSIONAL DRAWINGS EXPLOSION PROOF BLUETOOTH SERIAL ADAPTER The Solexy Bluetooth wireless serial adapter is a cost effective solution for serial data transmission. The Class 1 Bluetooth radio can reach wireless transmission distance of 100 meters. Available for RS232 or RS485/422 serial port, making it a flexible solution for M2M applications. With Solexy’s WA and WS enclosures and their rugged construction combined with Atex and IECEx certificates, Solexy offers a wireless device solution for installation in classified Ex areas (gas, dust and mining). FEATURES Operating Functions RS232 or RS485/RS422 serial cable replacement Bluetooth v2.0 + EDR Supports up to 4 multiple simultaneous connections Supports Bluetooth profiles SPP (Serial Port Profile) Interoperability with PDA, laptops, etc... Configuration Easy to use Windows configuration tool available (no external drivers required) Heavy duty construction Explosion proof Ex d IIC available in corrosion resistan alluminum (WA series) or stainless steel (WS series) weather proof enclosure IP66/68 GENERAL Power supply Power consumption 5-12VDC min 2 mA - max 80 mA HARDWARE Serial speed up to 921.6 kbps B16019-00-00 - Data contained in this specification is subject to change without notice CTR/RTS flow control DTR/DSR for loop-back & full transfer (B10 type only) Max TX power Max EDR Transmit power Receiver sensitivity BLUETOOTH INTERFACE Bluetooth v2.0 + EDR Class 1 Profile - SPP AMBIENT TEMPERATURE RANGE WA series -20°C +68°C WS series -20°C +61°C +18 dBm +6 dBm -88 dBm APPROVAL ATEX / IECEx Certification II 2 (1) G Ex db mb [ia Ga] IIA/IIB/IIC T6 Gb II 2 (1) D Ex mb tb [ia Da] IIIC T85°C Db I M2 (M1) Ex db mb [ia Ma] I Mb (WS only) www.SOLEXY.net SPECIFICATIONS EXPLOSION PROOF BLUETOOTH SERIAL ADAPTER NOMENCLATURE S WA B10 01 - 42 0 X4 _____ ___ ___ a b c a Enclosure WA Aluminum polyester powder coated WS Stainless steel AISI 316 (CF8M) electropolish b Device B10 RS232 Bluetooth serial adpater B11 RS485/RS422 Bluetooth serial adapter c Antenna coupler (1) 01 n° 1 AXN series (N Female) 02 n° 1 AXF series (RP-SMA Female) ___ d ___ e d Cable entries 42 n° 4 3/4” npt-f (one used for antenna coupler) 44 n° 4 M25x1.5 (one used for antenna coupler) e Approval X3 IECEx and ATEX Gas and Dust (WA only) X4 IECEx and ATEX Gas, Dust and Mining (WS only) NOTE: (1) Antenna not included DIMENSIONAL DRAWINGS 3.661” [93 mm] 9.29” [236 mm] 1.968” [50 mm] M8x1.25 - 6H Cable entries (npt or metric) M6x1 - 6H 3.937” [100 mm] 7.716” [196 mm] SOLEXY SRL Via Enrico Fermi, 2 25015 Desenzano del Garda (BS) Italy Phone (+39) 030 787.0.787 | [email protected] www.solexy.net SOLEXY USA, LLC 10168 International Blvd. Cincinnati (OH) 45246 USA Phone (+1) 513.860.5465 | [email protected] www.SOLEXY.net SOLEXY ANTENNA COUPLER FOR ANTENNA CONNECTION EXPLOSION PROOF RF JUNCTION BOX Solexy's Explosion proof RF junction boxes are specifically designed to allow a radio frequency coax cable junction/extension in hazardous location. There are many installations in Radio Frequency where you are going from a non-rated area to a hazardous area. With the Solexy HWA and HWS series RF Junction boxes there is now a solution to this type of installation. With our RX series Antenna connection and the HWA/HWS series junction box a Hazardous area field connection can now be made. Utilizing the RX antenna coupler the antenna is not required to be Haz Loc or Ex rated. This simple solution is available with many options with coax connections and Antennas or as a cable connection to an antenna mounted on a mast. Solexy's Explosion proof RF junction boxes are available in two configurations, the HWA series is a more cost effective option that is manufactured from corrosion resistant low copper aluminum. The HWA series is powder coated to prevent corrosion in harsher outdoor environments. The HWS series is manufactured in 316 Series Stainless Steel (CF8M). This box is built for the toughest environments when nothing else but Stainless will do. FEATURES Heavy duty construstion Explosion proof Ex d IIC enclosure made in alluminum (WA series) or stainless steel (WS series) Weather proof IP66 / IP68 Cable entries M25x1,5 or 3/4” npt-f Temperature range -40°C to +80°C ENCLOSURE Atex and IECEx certified II 2G Ex db IIC T6-T5-T4 Gb II 2D Ex tb IIIC T110°C / T110°C / T140°C I M2 Ex d I Mb (WS only) B16020-00-00 - Data contained in this specification is subject to change without notice Atex certificate nr. EXA 14 ATEX 0042 and IECEx certificate nr. IECEx EXA 14.0001 ANTENNA BARRIER Atex and IECEx certified I M2 (M1) Ex db mb [ia Ma] I Mb II 2 (1) G Ex db mb [ia Ga] IIA/IIB/IIC T5/T6 Gb II 2 (1) D Ex mb tb [ia Da] IIIC T100°C/T80°C Db Atex certificate nr. EXA 15 ATEX 0042 and IECEx certificate nr. IECEx EXA 15.0005 www.SOLEXY.net APPROVAL EXPLOSION PROOF RF JUNCTION BOX NOMENCLATURE H WA 001 00 - 42 0 X1 _____ ___ a b a Enclosure WA Aluminum polyester powder coated WS Stainless steel AISI 316 (CF8M) electropolish b Connector 001 RP-SMA Male 002 RP-SMA Female 003 SMA Male 004 SMA Female 007 N Male 008 N Female 009 TNC Male 010 TNC Female 011 BNC Male 012 BNC Female ____ c ____ d c Cable entries 42 n° 4 3/4” npt-f (one used for antenna coupler) 44 n° 4 M25x1.5 (one used for antenna coupler) d Approval X1 IECEx and ATEX Gas and Dust (WA only) X2 IECEx and ATEX Gas, Dust and Mining (WS only) NOTE: Antenna and Antenna Coupler not included DIMENSIONAL DRAWINGS Cable entries (npt or metric) 1.968” [50 mm] M8x1.25 - 6H Cable entry (npt or metric) M6x1 - 6H 3.937” [100 mm] 7.716” [196 mm] SOLEXY SRL Via Enrico Fermi, 2 25015 Desenzano del Garda (BS) Italy Phone (+39) 030 787.0.787 | [email protected] www.solexy.net SOLEXY USA, LLC 10168 International Blvd. Cincinnati (OH) 45246 USA Phone (+1) 513.860.5465 | [email protected] www.SOLEXY.net 3.661” [93 mm] 7.125” [181 mm] SOLEXY ANTENNA COUPLER FOR ANTENNA CONNECTION (SOLD SEPARATELY) SOLEXY SRL via Enrico Fermi, 2 25015 Desenzano del Garda (BS) Italy Phone +39 030 787.0.787 Fax. +39 030 787.0.777 SOLEXY USA, LLC 10168 International Blvd. Cincinnati, OH 45246 USA Phone +1-513-860-5465 Fax +1-513-860-5464 www.solexy.net - [email protected]