Transcript
Product Specifications HBXXX HBXXX--6516DS 6516DS--VTM
Andrew® Hex Port Teletilt® Antenna, 1710–2180 MHz, 65° horizontal beamwidth, RET compatible l
Excellent solution for site sharing and maximizing capacity
l
Excellent fronttoback ratio, USLS, VSWR, and PIM specifications to enhance network quality
l
Ideal solution for dense urban, suburban site applications
l
Each antenna downtilt can be independently adjusted for greater flexibility in network optimization
Electrical Specifications Frequency Band, MHz Gain, dBi Beamwidth, Horizontal, degrees Beamwidth, Vertical, degrees Beam Tilt, degrees USLS, dB FronttoBack Ratio at 180°, dB CPR at Boresight, dB CPR at Sector, dB Isolation, dB VSWR | Return Loss, dB PIM, 3rd Order, 2 x 20 W, dBc Input Power per Port, maximum, watts Polarization Impedance
1710–1880 17.9 64 7.8 2–10 17 32 23 7 30
1850–1990 17.7 63 7.4 2–10 17 35 26 7 30
1920–2180 17.8 62 7.0 2–10 17 35 24 6 30
1.4 | 15.6
1.4 | 15.6
1.4 | 15.6
150 300 ±45° 50 ohm
150 300 ±45° 50 ohm
150 300 ±45° 50 ohm
Electrical Specifications, BASTA* Frequency Band, MHz Gain by all Beam Tilts, average, dBi Gain by all Beam Tilts Tolerance, dB
1710–1880 17.4 ±0.4
1850–1990 17.2 ±0.4
1920–2180 17.4 ±0.6
2 ° | 17.4
2 ° | 17.3
2 ° | 17.6
6 ° | 17.4
6 ° | 17.3
6 ° | 17.5
10 ° | 17.2
10 ° | 17.0
10 ° | 17.1
±4 ±0.5 10 30 27 7
±3.7 ±0.4 18 31 28 7
±4.5 ±0.4 19 31 26 7
Gain by Beam Tilt, average, dBi Beamwidth, Horizontal Tolerance, degrees Beamwidth, Vertical Tolerance, degrees USLS, dB FronttoBack Total Power at 180° ± 30°, dB CPR at Boresight, dB CPR at Sector, dB
* CommScope® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the whitepaper Time to Raise the Bar on BSAs.
General Specifications Antenna Brand
Andrew®
Antenna Type
DualPol® single band, hex port
Band
Single band
Brand
DualPol® |
Operating Frequency Band
1710 – 2180 MHz
Teletilt®
©2015 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 20, 2015
page 1 of 2 February 27, 2015
Product Specifications HBXXX HBXXX--6516DS 6516DS--VTM
Mechanical Specifications Color
Light gray
Lightning Protection
dc Ground
Radiator Material
Low loss circuit board
Radome Material
Fiberglass, UV resistant
RF Connector Interface
716 DIN Female
RF Connector Location
Bottom
RF Connector Quantity, total
6
Wind Loading, maximum
802.0 N @ 150 km/h 180.3 lbf @ 150 km/h
Wind Speed, maximum
241.5 km/h
|
150.1 mph
Dimensions Depth
90.0 mm | 3.5 in
Length
1309.0 mm
Width
500.0 mm
|
Net Weight
15.3 kg
33.7 lb
|
|
51.5 in 19.7 in
Remote Electrical Tilt (RET) Information Model with Factory Installed AISG 2.0 Actuator HBXXX6516DSA3M RET System
Teletilt®
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 113642006 ISO 9001:2008
Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system
Included Products 600899A2 — Downtilt Mounting Kit for 2.4 4.5 in (60 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
©2015 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 20, 2015
page 2 of 2 February 27, 2015
