Preview only show first 10 pages with watermark. For full document please download

Hc-120 Mc/mp - Proco Sound

   EMBED

Share

Transcript

HELIX HC-120 MC/MP CABLE/PANEL MALE MULTIPIN CONNECTOR PINOUT REAR VIEW SMALL GUIDE PIN DESCRIPTION: Pinout for Pro Co HELIX System Cable/Panel-mount male multipin connector using top-exit covers (rear view). NOTE: This is also the front view for female connectors. ABBREVIATIONS: 1S = Channel #1 Shield 1H = Channel #1 Hot (+) 1C = Channel #1 Cold (-) Length 2-1/2” 3” 3-1/2” 4” 29C 24S 34C 30S DESCRIPTION Male, Fixed Screw, Panel mount Male, Actuating Screw, Cable mount Female, Fixed nut, Panel mount Female, Actuating nut, Cable mount DESCRIPTION Solder-type contacts Crimp-type contacts Contact insertion tool Contact extraction tool Contact crimping tool Pro Co Sound 225 Parsons Street | Kalamazoo, MI 49007 800-253-7360 29S 23C 20H 19H 33C 31S 28H 25S 28S 25H 38C 37H 33H 31H 26S 3S 13C 10H 8H 4H 16H 13H 10C 8S 4C 2C 16C 11S 7C 5S 2H 13S 7H 5H 2S 27S 22S 21C 18S 17C 12H 11C 7S 5C 1C 26C 17H 12C 11H 32H 21H 18H 17S 32C 26H 22H 18C 38S 32S 27H 21S 14S 8C 37C 33S 27C 22C 16S 38H 31C 25C 23S 10S 4S 3H 28C 37S 34S 30C 15C 9C 3C 36C 39S 19S 14H 9S 34H 39H 20C 15H 9H 36H 24C 23H 14C 39C 30H 24H 15S 40S 36S 35S 19C ADDITIONAL ELCO/EDAC PARTS AND ACCESSORIES: PART NUMBER 60-8017-0513 60-8017-0313 06-1742-04 06-1877-04 06-7852-01 35C 20S HELIX MULTIPIN CONNECTOR PART NUMBERS: PART NUMBER HC-120-MP HC-120-MC HC-120-FP HC-120-FC 35H 40H 29H STANDARD PREP LENGTHS: Channel # 1 - 11 12 - 21 22 - 32 33 - 40 40C 12S 6C 6S 1H 6H 1S A LARGE GUIDE PIN C A B L E E X I T S A T T H I S E ND NOTES: IMPORTANT NOTES ON ELCO/EDAC MULTIPIN CONNECTORS 1. All connectors come without contacts. 2. Crimp-type contacts are rated for 18 - 26 AWG wire. 3. Solder-type contacts require individual heat-shrink insulation of each solder joint (1/8” thinwall recommended). 4. “Male” connectors have exposed contacts 5. “Female” connectors have recessed contacts. 6. It is extremely difficult to terminate Elco/Edac connectors without the Elco contact tools (listed above). 7. It is impossible to use a male actuating screw or female actuating nut connector on a panel or snake box. They are only used for cable mount. 8. The contacts are genderless. » www.procosound.com HC120MC/MP-01 Rev. 07/10