Transcript
High Definition Infrared Camera
HD-IR 1280 MCT A HIGH RESOLUTION INFRARED CAMERA The HD-IR 1280 infrared camera is a high resolution scientific camera which allows the analysis of events or targets with the highest possible detail by producing sharp, crisp images. The cameras’ high sensitivity makes it the ideal tool for applications such as surveillance of vast areas and airborne mapping.
Key Features and Benefits 1.3 Megapixel Image Resolution: Produces sharp, crisp images and allows to monitor vast areas and see fine details
Coastline surveillance & IR signature acquisition
Advanced Calibration: Unique proprietary real-time processing of infrared images including NUC, radiometric temperature, in-band radiance, automated exposure control (AEC) and enhanced high dynamic range imaging (EHDRI). With these unique features, scientists benefit from ease of use and operation flexibility while getting accurate measurements over the entire camera’s operation range. High Dynamic Range: Unique Telops proprietary non-linearity correction and exposure time independent calibration algorithms ensure observation of scene targets with the highest possible contrast and accuracy. Accurate Measurement: Radiometric temperature accuracy of ±1 °C or ±1 % over the entire range.
IR signature acquisition
HD-IR 1280 MCT Datasheet
High Sensitivity: Temperature differences as small as 20mK are detectable.
Technical Specifications MCT
HD-IR 1280 MCT
Detector Specifications
HD-IR 1280 MCT
Detector type
MCT
Spectral range
3.7 µm – 4.8 µm
Spectral resolution
1280 x 1024
Detector pitch
15 µm
Aperture size
f/3
Sensor cooling
Split-stirling closed cycle
Typical Performances Maximum full frame rate
50 Hz
Scene temperature range
−15 °C to 150 °C Up to 1500°C (option) Up to 2500°C (option)
Measurement accuracy
1 K or 1 % (°C)
Typical NETD
25 mK
Electronic Specifications Exposure time
16 µs to full frame rate
Windowing to increase frame rate
yes
Dynamic range
16 bits
Camera Construction Lens mount
Flanged interface
Size w/o lens
14" x 9" x 9.5"
Weight w/o lens
< 11 kg
User Interface 1
5 8
2
6
3
7
4
© 2014, Telops Inc. All rights reserved. TEL-COMM-00084a
1. Trig-in: Trigger the camera on TTL signal 2. IRIG-B 3. Thermistor: LCC 4. Power: 24 VDC 60W steady-state 5. Trig-out: Output TTL signal 6. NTSC/PAL 7. GPS Input: GPS time and location from external GPS receiver 8. CameraLink base/full
