Transcript
TOP DAWG HD Platinum DVR DASH CAM Instruction Manual PART #: TDHDCAM02 UPC: 700953175724
Congratulations on your purchase! Please read and understand all instructions before you use your device. If you do not use device properly and follow all instructions, the warranty can be voided.
Button Distribution
Please Note: 1. Menu
2. Up
3. Down
4. Mode
5. LCD Display
6. AV out
7. Nothing
8. Holder hook
9. Reset
10. Mini-‐USB
11. Lens
12. Speaker
13. Microphone
14. Power On/Off
15. TF card slot
16. Rec
Provided Power Options: 1. Built-‐in rechargeable 500mAh Li-‐ion battery. 2. DC/DC Charger (car charger), AC/DC adapter w/USB cable
Functions introduction: Please insert a TF card before powering on the camera. *If prompted, format SD Card. If you remove the TF card while the camera is on, the camera will shut down. 1. Power On/Off： • •
To power on the camera, when not connected to the Car Charger or USB cord, press the Power On/Off button momentarily. When the Car Charger is inserted into the USB port of the camera (assuming the charger is already connected to the 12V auxiliary power outlet aka cigarette lighter receptacle) it will turn on (if off) and start recording automatically. When the cord disconnected, the camera will power off automatically.
2. Recording： • •
When the camera is on, without the charger, press the ‘REC’ button, momentarily, to start recording. To stop recording, momentarily press the “REC” button again. When the Car Charger is inserted into the camera through the USB port, the camera will start recording automatically. Press the “REC” button momentarily to stop recording.
3. Photography： •
When camera is on, press the “Mode” button to enter “Photography” mode. Once in “Photography” mode; press “REC” to take photos.
4. Preview/Playback： •
When camera is ON, press “Mode” button twice to enter “Preview/Playback” mode. To select a specific file use the “Up/Down” buttons to browse the videos/photos, then press “REC” to playback the selected file or view photo.
Video menu: During video mode, press “Menu” button to enter the video menu setting； 1. Video resolution: VGA/HD • VGA：640 x 480/25FPS • HD：1280 x 720/25FPS 2. Date Stamp: On/Off • When “Date Stamp” is ON, the date/time details will be stamped onto video screen and photos, as watermark. • When “Date Stamp” is OFF, the date/time details will not be stamped onto video screen and photos. 3. Motion Detection: On/Off • When “Motion Detection” is ON, the camera will record automatically when movement is detected. • When “Motion Detection” set OFF, the camera will operate normally. 4. Voice recording: On/Off • When “Voice Recording” is ON, the camera will record with audio. • When “Voice Recording” is OFF, the camera will record without audio. 5. Loop recording: • When “Loop Recording” is on, the camera records footage in increments of 2, 5, and 15 minutes, whichever you choose. o 2 min: Video segments will be 2 min long o 5 min: Video segments will be 5 min long o 15 min: Video segments will be 15 min long
Photo menu: In “Photography” mode, press “Menu” button to enter photo menu. • VGA：photo size will be 640 x 480 • 1.3M：photo size will be 1280 x 1024
Preview menu: In “Preview” mode, press “Menu” button to enter “Preview” menu. 1. Delete: Single/All/Cancel • Single: Deletes the current file. • All: Deletes all the files • Cancel: Exits the sub-‐menu 2. Thumbnail: Execute/Cancel • Execute：all files will display by thumbnail format • Cancel: back to last menu 3. Volume: • Volume is adjustable from 1 (the lowest) to 8 (the highest).
Setup Menu: Press “Menu” button twice to enter “Setup” menu 1. Format: • Execute：all data in TF card will be deleted • Cancel: back to last menu 2. Language: • The type of language can be changed here. There are six languages to choose from. 3. System reset: Execute/Cancel • Execute: will reset the device to the factory defaulted data； • Cancel: back to last menu 4. Light frequency • 50Hz/60Hz selectable for different countries (For North America please choose 60Hz) 5. Date Input: • Date input: First select the format – MM/DD/YYYY, then press “REC” to set. Use UP/DOWN buttons to select correct variable, then press “REC” button to confirm and move to next field. Continue this way until the date and time are complete. • Cancel: Will take you back to the main menu. 6. TV Output • PAL/NTSC selectable for different countries. (Use NTSC for North America)
How to download files from device: • • • •
Connect the camera to a PC using the provided USB data cable. Wait for the “Autoplay” menu to appear. Select “View Files and Folders”. Copy the files that you want from the folder “DCIM”.
Technical Parameters: LCD screen
2.7” Hi-‐definition TFT-‐LCD screen
Video resolution
HD（1280 x 720）/VGA (640 x 480)
Video file format
AVI
Photo size
1.3MP （1280 x 1024）/VGA (640 x 480)
Photo file format
JPG
TF card supported
4GB-‐32GB
Mic/Speaker
Built-‐in
TV output
PAL/NTSC
Power input
DC 5V/1A
Battery
Built-‐in Li-‐ion battery rechargeable
Note: Factory reserves the right to change the specs of device without further notice.
Troubleshooting a) Cannot record? Confirm the memory card is inserted properly and there is enough free space on the memory card to record. Also confirm that the unit has enough battery or is plugged into a power source.
b) Image is blurred? Use a clean, soft lens-‐cleaning cloth to gently clean the lens.
c) If the device stops functioning or crashes: Use a small probe of some type (paper clip works great) and insert into the reset hole located on the top of the camera. Gently press until you feel is click. Or you can try removing the battery and reinserted to perform a “Hard Reset”. If all else fails feel free to call customer service for more in depth troubleshooting.
Top Dawg Electronics Limited Warranty What warranty covers: Manufacturer warrants to original purchaser that the product finished hereunder shall be free from defects in material and workmanship under normal use and service. In the event of any defect in material or workmanship, the Manufacturer will for twelve (12) months from the date of delivery of product to purchaser, F.O.B. point of origin replace any defective parts in respect to the product or replace the product with new or like new product at Manufacturers option. In the event of a defect, return the product in tact to the Manufacturer (shipping to Manufacturer will be paid by purchaser) with evidence of purchase date within last 12 months for proper handling of the warranty claim. What is Not Covered: −
Defects or damage resulting from use of products in other than it normal and customary manner
−
Defective or damage from misuse, accident, water or neglect
−
Scratches or cosmetic damage that does not affect operation of the product
−
Product damage or bodily injury
−
Contact TD to purchase extended replacement warranty
General Provisions: This warranty is given in lieu of all other express warranties, implied warranties, including without limitation, implied warranties or merchantability and fitness for a particular purpose, are limited to the duration of this limited warranty, in no event shall the Manufacturer or seller be liable for damages in excess of the purchase price of the product This device may not be used to violate the privacy rights of others. In no way will Top Dawg Electronics or its subsidiaries or partners be held responsible for inappropriate use of this product. It is the sole responsibility of the buyer to consult legal counsel for the interpretation of any laws applicable to the area of intended use of these products.
Contact Information: Top Dawg Electronics 13630 Immanuel Rd, Ste E Pflugerville, TX 78660 512-‐251-‐8472 www.topdawgelectronics.com
