Preview only show first 10 pages with watermark. For full document please download

Hd-ra2 Dtr (en)

   EMBED

Share

Transcript

ACCESSORIES Model HD-RA2 Rack Adapter Installation/Operation EN55103-1 E1-E5; EN55103-2 E1-E4 Typical Performance reflects product at publication time exclusive of EMC data, if any, supplied with product. Specifications are subject to change without notice. Step 2 Slide the screw heads through the holes in the HD-RA2. Step 1 Remove the 4 feet from the bottom of the HD series unit and install two washers (provided) onto each screw. Step 3 Slide the HD series unit back and tighten the screws to secure the unit to the HD-RA2. Step 4 Snap the Power Supply bracket (included) onto the side of the HD-RA2 in the position desired. 891-3370 Radio Design Labs Technical Support Centers U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506 Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287