Transcript
Specifications
HD-SDI MULTI UNIT MU-HD101 Ａ．The point of commercial production ・This multiunit is only for HDTV Single-Chip Color Camera (KP-HD20A/KP-HD1001/KP-HD1005). ・This multiunit can perform 300 meter and low delay (less than 34 msec) HDTV signal transmission. Ｂ．Selling point ・HDTV picture can be transmitted 300 meter by HD-VLC format on 5C-2V cable ・Four monitor outputs（HD-SDI/DVI-D/VGA/BNC) ・Monitor outputs in 16:9/4:3 formats（1080/SXGA/XGA/NTSC/PAL） ・System configuration is easy since it is HD-SDI. (Only carry out cable connection) ・Substitution from analog to digital is easy since it is HD-SDI. (A BNC cable can be used as it is) ・A simple system configuration is possible by one cable connection of coaxial power supply superposition. Ｃ．External view
Ｄ．Market Surveillance for railroad, plant, in-vehicle, crossroad, casino and bank. Ｅ．System chart System connection diagram of exclusive multiunit(MU-HD101).
HD-cable extend mode
HD-cable extend mode
Exclusive multiunit MU-HD101
5C-2V 75ohm max:300m Power supply by coaxial superposition
（All-purpose） HD-SDI input recorder NTSC/PAL monitor
HDMI monitor
VGA monitor
Specifications MU-HD101 Input video format Output video format
Frame rate
Transmission distance
HD-SDI（SMPTE292M） HD ｃable extend-SDI（original format） Full HD: 1920x1080 SXGA: 1280x1024 XGA: 1024x768 NTSC: 720x486 PAL: 768x576 Full HD(1080): 59.94i/50i/29.97p/25p SXGA: 60p XGA: 60p NTSC: 59.94i PAL: 50i HD-SDI: 100m（5C-2V）, 60m（3C-2V） HD cable extend-SDI: 300m（5C-2V）, 170m（3C-2V）
Input
SDI input: BNC
Output
SDI: BNC（75ohm） Analog: BNC（75ohm） DVI-D: DVI-D（SINGLE LINK） VGA: DSUB15pin
Remote control
RS-232C Input x 1, Output x 1 AC100V-230V±10% /13W（as power supply by coaxial superposition is ON）, 5W（as power supply by coaxial superposition is OFF） -10-+45℃ 160（W）ｘ42（H）x170（D）mm Approx. 700g
I/O Power consumption Operating temperature External dimensions Mass
● The contents of these development specifications may be changed without a preliminary
