Transcript
iceValet® Hotel Dispenser Features Stores up to 180 lb. of cube ice. Simple push chute for easy ice dispensing. Modern, stylish design in a stainless steel cabinet. Removeable top panel allows access to the bin for easy cleaning without having to remove the ice machine. Improved sink depth that will accomodate almost every size hotel ice bucket. Equipped with an 11 ft. power cord. Match the iceValet dispenser with a Scotsman Prodigy® ice machine featuring self-monitoring technology, cost-saving energy efficiency, extended time between cleanings, easy-access servicing and built-in anti-microbial protection. All these features add up to the smartest choice in ice.
HD30 shown with a Prodigy CO330A cuber
Storage Capacity HD30 AHRI Bin Capacity lb/kg
180/81
Matching Ice Machine Options Model Number
Cube Size
Condenser Type
C0330MA C0330MW C0330SA C0330SW C0530MA C0530MW C0530SA C0530SW
Medium Medium Small Small Medium Medium Small Small
Air Water Air Water Air Water Air Water
8
24 hr Ice Production 70˚F/21˚C Air 90˚F/32˚C 50˚F/10˚C Water 70˚F/21˚C lb/kg lb/kg
350/159 400/182 350/159 400/182 562/255 595/270 562/255 595/270
280/127 280/127 280/127 280/127 400/182 480/218 400/182 480/218
Polyurethane Insulation Easy Push Chute
Warranty
Foam insulation is forced between the wall and liner under heat and pressure to form a perfect wall to wall bond, preserving ice supply for long periods.
• 3 years parts and labor on all components.
Scotsman Ice Systems • 775 Corporate Woods Parkway • Vernon Hills, IL 60061 1-800-SCOTSMAN Fax: 847-913-9844 E-mail:
[email protected] www.scotsman-ice.com
Warranty valid in North, South & Central America. Contact factory for warranty in other regions.
HD30 – 30” Hotel Dispenser
HD30 – 30” Hotel Dispenser
Installation Note: Allow 6” space at left, back and right side for ventilation and utility connections. [76.24] 30”
[76.24] 30”
ICE HEAD
ICE HEAD (2) 5/16 - 18 UNC ICE HEAD MOUNTING
[58.42] 23”
[45.11] 17 3/4” [25.47] 10” WATER VALUE HEIGHT
ICE FILL STATION 8 3/4 [221.5] HEIGHT 13 1/2 [342.9] WIDTH 8 1/2 [215.9] DEPTH
POWER CORD
[193.68] 76 1/4”
PUSH FOR ICE
[135.13] 53 1/4”
WATER INLET 3/8 FLARE (WATER FILLER ONLY)
(WATER FILLER ONLY) [65.06] 25 5/8”
[44.44] 17 1/2” 3/4 FPT DRAIN
[17.91] 7”
[15.24] 6” [84.94] 33 1/2”
[18.97] 7 1/2”
[18.94] 7 1/2”
C0330 on HD30 hotel dispenser.
Specifications Model Number
HD30B-1 HD30W-1*
Actuation
Push Push
ARI Bin Capacity lb/kg
Electrical
Circuit Wires
Min. Circuit Ampacity
Max Fuse Size of HACR Circuit Breaker (amps)
180/81 180/81
115/60/1 115/60/1
2 2
2.1 2.1
15 15
* Unit comes with a water spout next to the ice chute.
All Models
Accessories
Dimensions (W x D x H): Unit: 30” x 33.5” x 47.25” (76.2 x 85.1 x 120.0 cm) Shipping Carton: 33” x 37” x 53” (83.8 x 94 x 134.6 cm) Shipping Weight: 225 lb / 102 kg
Model Number
Description
208-230/60/1
2
2.6
15
* Scotsman recommends all ice machines have water filtration. See Scotsman Sanitation Matrix for details.
Operating Requirements Minimum Air Temperatures Water Temperatures Remote Cond. Temps Water Pressures Electrical Voltage
50°F (10°C) 40°F (4.4°C) -20°F (-29°C) 20 PSIG (1.4 bar) -10%
Maximum
100°F (38°C) 100°F (38°C) 120°F (49°C) 80 PSIG (5.5 bar) +10%
Specifications and design are subject to change without notice.
Scotsman Ice Systems • 775 Corporate Woods Parkway • Vernon Hills, IL 60061 1-800-SCOTSMAN Fax: 847-913-9844 E-mail:
[email protected] www.scotsman-ice.com © 2012 Scotsman Ice Systems.
SIS-SS-DIS-HD30 6-12
HD30 – 30” Hotel Dispenser
Revit drawings available at www.scotsman-ice.com
