Hdbaset Bus System Daisynet Features

Transcript

HDBaseT Bus System DaisyNET DaisyNET from COMM-TEC is a wired distribution system for uncompressed high resolution AV signals on a dedicated bus. It handles HDMI 1.4, Displayport and VGA input signals, converts them to HDMI if needed and sends them using CAT-5e/6 cables over distances up to 100m. ct_sig_daisyNET_db01_e/01/J2013/TCL/ Copyright by COMM-TEC At the same time Ethernet data up to 100 Mbps is distributed over the same cable. The ingenuity of the system is that it works in a daisy chain topology. You can add as many units as you need. Connection is done by using inexpensive easy to install CAT-5E/6 cables. Pushing a local “ShowMe” button on any transmitter feeds its signal on the HDBaseT bus. At the end of the bus we use a receiver device. It has an HDMI 1.4 output with HDCP and gives out the AV signal that is on the bus. It is also possible to daisy chain the receivers, they all will show the same signal. DaisyNET also offers RS232 ports. They are used for firmware update and for control purpose. Firmware update is done per unit, control is done on the very first unit, controlling all others. As soon as you connect one unit to a network, the whole system acts like a network switch and offer 100 Mbps at each unit. It is obvious, that units share the bandwidth. No matter if you use DaisyNET as a desktop application or hide it and just use the connectivity: DaisyNET can be utilized in a huge variety of vertical market applications. Features HDBaseT bus system with transmitters and receivers. Uncompressed HD AV signals up to 4k. UTP CAT-5E/6 cables between units up to 100m. • • • • • • • • • • • • • • • • • • • • • • • Transmitters can be daisy chained Receivers can be daisy chained Auto-adjustment for cable length No manual configuration needed Plug ‘n play Control over RS232 possible Control software available HDMI 1.4 IN at Tx DisplayPort IN at Tx VGA & Audio IN at Tx Ethernet port at Tx and Rx RS-232 port at Tx and Rx Daisy chain IN and OUT Daisy chain by CAT-5E/6 cable Cable specs IEEE-568B Local ShowMe button per Tx Remote ShowMe button Full HD support: Up to 4k x 2k DTS-HD & Dolby-HD audio Uncompressed signal transport LED indicator for selected input LED indicator daisy chain signal ESD protection for easy handling Architectural specification Please check our website for current information: www.comm-tec.de Type: DaisyNET Tx and DaisyNET Rx Manufacturer: COMM-TEC HDBaseT Bus System DaisyNET Technical specifications Type DaisyNET Description DaisyNET Transmitter (Tx) DaisyNET Receiver (Rx) Cat.-Nr. Transmitter (Tx) Inputs Type 7090DNTX 7090DNRX HDMI 1.4 Displayport VGA (Sub-D) Audio 3.5 mm stereo phone jack Handling Local ShowMe button Remote input for ShowMe, 2-pin Phoenix RS232 port, 3-pin Phoenix Receiver (Rx) Output Type HDMI 1.4 with HDCP Network 100 Mbps, RJ45 Dimensions (W x H x D) in mm 230 x 35 x 120 Weight 800 g Accessories Power supply User manual Optional accessories Control software (download at COMM-TEC) COMM-TEC GMBH SIEMENSSTRASSE 14 D-73066 UHINGEN TEL 07161/30 00-0 WWW.COMM-TEC.DE TFAX 07161/30 00-400