Hdbaset Solutions

Transcript

10 Section 10 HDBaseT SOLUTIONS HDMI Reticulation Solutions - HDBaseT What is HDBaseT? HDBaseT is a connectivity standard for home and commercial distribution of uncompressed HD multimedia content. HDBaseT - 5Play The cornerstone of HDBaseT technology is 5Play™, a feature set that converges uncompressed full HD/3D and 2K/4K digital video, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio, 100BaseT Ethernet, PoE and various control signals through a single 100m Cat5e/Cat6 LAN cable. HDBaseT - 3Play HDBaseT 3Play™, a feature set that converges uncompressed full HD/3D and 2K/4K digital video, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio and various control signals through a single 60m Cat5e/Cat6 LAN cable. FEATURES •• Video: HDBaseT delivers full HD / 3D and 2K / 4K uncompressed video to a network of devices or to a single device (point-to-point ). •• Audio: HDBaseT audio supports all standard formats, including Dolby Digital, DTS, Dolby TrueHD, and DTS HD-Master Audio. •• Control: HDBaseT enables multiple control signals for multiple purposes: Consumer Electronic Controls (CEC), Recommended Standard (RS)-232, USB, and infrared (IR). •• Ethernet: HDBaseT supports 100Mb Ethernet (up to 100m), enabling communication between televisions, sound systems, computers, and other CE devices as well as access to any stored multimedia content •• Power (PoE): Up to 100W of DC power can also be delivered over the same CAT5e/6 cable. FEATURES •• Video: HDBaseT delivers full HD / 3D and 2K / 4K uncompressed video to a network of devices or to a single device (point-to-point). •• Audio: HDBaseT audio supports all standard formats, including Dolby Digital, DTS, Dolby TrueHD, and DTS HD-Master Audio. •• Control: HDBaseT enables multiple control signals for multiple purposes: Consumer Electronic Controls (CEC), Recommended Standard (RS)-232, USB, and infrared (IR). HDBaseT Matrix Switch - 5Play MODEL CODE TYPE HDMI4X4HDBT HDMI8X8HDBT HDMI507R 4x HDMI In, 4x RJ45 Out 8x HDMI In, 8x RJ45 Out Cat6 Receiver with HDMI, PoE, LAN, IR & RS-232 „„ Requires HDMI507R receiver per output device Audio Video Hardware The HDBaseT™ 4 by 4 or 8 by 8 HDMI Matrix over CAT5e/6/7 supports the transmission of video (resolutions up to 1080p Full HD and (1920x1200@60Hz), multi-channel digital audio and control via IR, RS-232 or Telnet from four or eight high definition sources to four or eight outputs over a single CAT5e/6/7 cable (up to 100m) for each output. 149 It supports high resolution digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3DTV and 3D source. Power over Ethernet (PoE) support means that compatible receivers do not need their own power supplies, allowing for greater flexibility in installations. FEATURES •• Supports HDMI 3D features •• Supports resolutions VGA~WUXGA and 480i-1080p •• Supports distances up to 100 meters through CAT6 cables and 80m for CAT5e •• Supports PoE (Power over Ethernet) •• Supports bidirectional IR from input and output locations •• Supports RS-232, remote control, on-panel control and IP Control (Telnet) •• 2U size design •• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD HDMI8X8HDBT 10 Section 10 HDBaseT SOLUTIONS HDBaseT Lite Matrix Switch - 3Play MODEL CODE TYPE HDMI4H4CVL HDMI513RXL 4x HDMI In, 4x RJ45 Out HDBT Lite Cat5e/6 Receiver with HDMI, LAN, Audio CMSI-46PL HDMI507R 4x HDMI In, 4x RJ45 Out + 2x HDMI Pass Through Cat6 Receiver with HDMI, PoE, LAN, IR & RS-232 „„ Requires HDMI513RXL / HDMI507R receiver per output device The HDBaseT™ HDMI Matrix over CAT5e/6 supports the transmission of video (resolutions up to 1080p Full HD and 1920x1200@60Hz), multichannel digital audio and control via IR, RS-232 or Telnet from four high definition sources to four outputs over a single CAT5e/6 cable (up to 60m) for each output. HDMI4H4CVL It supports high resolution digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3DTV and 3D source. FEATURES •• HDMI, HDCP1.1 and DVI compliant •• Supports HDMI 3D features •• Supports resolutions VGA~WUXGA and 480i~1080p dependent upon the output display’s EDID settings •• Supports distances up to 60 meters through CAT5e/6 cable •• Supports bi-directional IR from input and output locations •• Supports RS-232, remote control, on-panel control and IP Control (Telnet) •• 1U size design •• Supports external and internal EDID settings •• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission HDBaseT HDMI 100m Splitter - 5Play TYPE CHDBT-1H3CE CHDBT-1H7CE CHDBT-2H8CE 1x HDMI Input, 1x HDMI Output, 3x HDBaseT 100m Outputs 1x HDMI Input, 1x HDMI Output, 7x HDBaseT 100m Outputs 2x HDMI Input, 1x HDMI Output, 8x HDBaseT 100m Outputs The HDMI over CAT5e/6/7 Splitter can split and distribute a single HDMI input, 2-way IR control and LAN serving to up to seven CAT5e/6/7 outputs and includes a simultaneous HDMI bypass output. The HDMI bypass output can be connected to an HDMI display or cascaded to another splitter. The CAT5e/6/7 outputs can be connected to CAT5e/6/7 to HDMI receivers to extend the operating distance up to 100 meters. CHDBT-1H3CE Additionally, the LAN connectivity will allow a 100BaseT network to be served to smart TVs or games consoles. The Power over Ethernet (PoE) function can power compatible receivers, providing greater flexibility in installations. FEATURES •• HDMI with 4K×2K resolution and 3D support, HDCP and DVI compliant •• Simultaneous HDMI and CAT5e/6/7 outputs •• Supports one HDTV and seven CAT5e/6/7 outputs •• Data rate from 300 Mbps up to 3 Gbps •• Supports a wide range of PC resolutions from VGA to WUXGA (RB) and HDTV resolutions up to 4K×2K (3840×2160@30 Hz and 4096×2160@24 Hz) •• Transmits high definition audio: LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio (32 kHz~192 kHz sample rate) •• Distances up to 100 meters over CAT5e/6/7 cables •• Ethernet network rates up to 100Mbps •• Supports PoE with compatible Receiver units •• Supports selection of Standard or TV EDID settings •• Supports control of devices via 2-way IR •• 3D signal display is dependent on the TV/Display’s EDID settings CHDBT-1H7CE Audio Video Hardware MODEL CODE CHDBT-2H8CE 150 10 Section 10 HDBaseT SOLUTIONS HDBaseT HDMI 60m Splitter - 3Play MODEL CODE TYPE CHDBT-1H3CL CHDBT-1H7CL 1x HDMI Input, 1x HDMI Output, 3x HDBaseT 60m Outputs 1x HDMI Input, 1x HDMI Output, 7x HDBaseT 60m Outputs The HDMI over HDMI and CAT5e/6/7 Splitter can support resolutions up to 1080p Full HD, 4K×2K timing, 3D and multi-channel digital audio formats to one HDTV and seven CAT5e/6/7 outputs. The HDMI can be connected to HDMI display for instant nearby display and the CAT5e/6/7 can be connected to CAT5e/6/7 to HDMI Receivers for distance up to 60 meters Audio Video Hardware FEATURES •• HDMI with 3D and 4K×2K supported, HDCP and DVI compliant •• Simultaneous HDMI and CAT5e/6/7 outputs •• Supports one HDTV and seven CAT5e/6/7 outputs •• Data transfer rate from 250Mbps up to 3Gbps •• Supports wide range of PC resolutions from VGA to WUXGA and HDTV resolutions up to 4K×2K (3840×2160@30 Hz and 4096×2160@24Hz) •• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission (32-192 kHz sample rate) •• Distances up to 60 meters through CAT5e/6/7 cables •• Supports selection of Standard or TV EDID settings •• Supports USB service port •• Supports Bi-directional IR control •• The 3D signal display follow by display TV’s EDID 151 CHDBT-1H3CL CHDBT-1H7CL HDBaseT HDMI 100m Splitter HDBaseT HDMI 60m Splitter MODEL CODE TYPE MODEL CODE TYPE CHDBT-1H1CE 1x HDMI Input, 1x HDMI Output & 1x HDBaseT 100m Output CHDBT-1H1CL 1x HDMI Input, 1x HDMI Output & 1x HDBaseT 60m Output FEATURES •• HDMI with 3D & 4Kx2K supported, HDCP and DVI compliant •• Simultaneous HDMI and CAT5e/6/7 outputs •• Supports data rate from 250Mbps up to 3Gbps •• Supports wide range of PC resolutions from VGA to WUXGA and HDTV resolutions up to 4Kx2K (3840x2160@24/25/30Hz and 4096x2160@24Hz) •• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission (32-192kHz sample rate) •• Distances up to 100 meters over CAT5e/6/7 cables •• Ethernet network rate up to 100Mbps •• Provides 24V DC power to or received from compatible PoE Receiver through CAT5e/6/7 •• Supports control of devices via RS-232 and 2-way IR •• Supports bidirectional IR & PoE FEATURES •• HDMI with 4K×2K resolution and 3D support, HDCP and DVI compliant •• Simultaneous HDMI and CAT5e/6/7 outputs •• Data transfer rates from 250Mbps up to 3Gbps •• Supports a wide range of PC resolutions from VGA to WUXGA (RB) and HDTV resolutions up to 4K×2K (3840×2160@30 Hz and 4096×2160@24 Hz) •• Transmits high definition audio: LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio (32 kHz~192 kHz sample rate) •• Distances up to 60 meters through CAT5e/6/7 cables •• Supports control of devices via 2-way IR •• Supports RS-232 function 10 Section 10 HDBaseT SOLUTIONS / X-RAY REMOTE HDBaseT Cat5/6 HDMI Extender - 5 Play HDBT Wall Plate Reciever - 5Play MODEL CODE TYPE MODEL CODE HDMI507T HDMI507R Transmitter Receiver CH-507RXWP FEATURES •• HDMI with 3D, 4k×2k support, HDCP & DVI compliant •• Supports CEC bypass •• Simultaneous transmission of uncompressed data over a single 100 m/328 ft CAT6/CAT5e cable •• Uncompressed video 1080p, 60 Hz, 36-bit •• Audio support up to 7.1CH & Dolby TrueHD, DTS-HD •• 5Play™ convergence: HDMI, LAN, POE & Control (IR & RS232) This is a true HDBaseT 5Play solution which can greatly increase the efficiency and convenience of your home or office A/V system. FEATURES •• ​HDMI with 3D, 4K2K support, HDCP & DVI Compliant •• Supports HDCP repeater and CEC bypass •• Send uncompressed data over a single 100M CAT6 or CAT5e cable •• Uncompressed video of 36/30/24-bit deep color up to 1080p@60Hz •• Audio pass-through up to LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio •• 5Play™ convergence: HDMI, POE, Control (IR & RS232) & LAN •• Wall plate design and installation friendly HDMI507T HDMI507R HDBaseT Lite Cat5e/6 HDMI Extender - 3 Play X-Ray Remote MODEL CODE TYPE MODEL CODE TYPE HDMI513KIT Transmitter & Receiver REM-XRAY REM-XRAYTX Digital RF Remote Receiver Xray Remote Infrared Transmitter The X-Ray Remote transmitter is installed in place of one of the AA or AAA batteries in your remote control FEATURES •• Control your IR components from up to 30M away •• No direct line-of-sight necessary •• Works with most AA and AAA remote controls •• Receiver has built-in charger and comes with (2) 2/3 AAA specially sized rechargeable batteries •• Adds RF to your existing remote by simply installing the transmitter •• Single-eye emitter included Receiver Audio Video Hardware FEATURES •• HDMI with 3D, 4K×2K support, HDCP and DVI compliant •• Supports HDCP repeater and CEC bypass •• Supports HDMI (including HDCP) over a single CAT5e/6 up to 60m •• Full HD resolution support (1080p@60Hz/36-bit), 3D and 4Kx2K over 40m and PC resolution support (VGA to WUXGA) over CAT5e/6 cable •• Audio support up to LPCM 7.1CH, Dolby TrueHD, Dolby Digital & DTS-HD M •• 3PlayTM convergence HDMI & control (IR & RS232) HDMI513KIT Transmitter REM-XRAYTX REM-XRAY 152 10 Section 10 HDMI 4K2K UHD SOLUTIONS HDMI 4K2K UHD 4x4 Matrix Switch MODEL CODE TYPE CMPRO-4H4H 4 in 4 out Matrix Switch The 4 by 4 HDMI matrix with 4Kx2K supported which allows HDMI signal from any of its four sources to be routed to and displayed on any of its four connected HDMI displays simultaneously. It supports 3D, Deep Color, Hi-Def lossless audio and other features defined by HDMI specifications. The management of source/ sink scenarios can be operated easily through on-panel buttons, IR remote control, RS-232 or Web GUI controls. CR-33 D OUTPUT C OUTPUT B OUTPUT A OUTPUT POWER 7m m 3m FEATURES •• HDTV resolutions up to 4Kx2K@30Hz •• 7.1CH of LPCM, Dolby TrueHD, and DTS-HD Master Audio •• Supports 1080p@60Hz, Deep Color 36/30/24 bits •• Supports Internal/External EDID •• Supports IR, RS-232 and Web GUI controls Blu-ray or PS3 Player Blu-ray or PS3 Player Blu-ray or PS3 Player Blu-ray or PS3 Player HDMI HDMI RS-232 Equipped PC or Notebook HDMI HDMI OUTPUT INPUT 1 3m 60° 2 3 A 4 B C D IR IN RS232 CONTROL POWER DC 5V SERVICE HDMI HDMI 3D TV/ Display 3D TV/ Display HDMI Audio Video Hardware 3D TV/ Display 3D TV/ Display HDMI 4K2K UHD Splitters / Multiplexes MODEL CODE TYPE MODEL CODE TYPE CPRO-2E CPRO-4E CPRO-8E 2 Port 4 Port 8 Port LKV312PRO LKV314PRO LKV318PRO 2 Port 4 Port 8 Port FEATURES •• HDMI and DVI compatible •• Fully HDCP compliant •• Supports 3D •• Supports HDTV resolutions up to 4K×2K@30 Hz •• Supports PC resolutions of VGA to WUXGA •• Supports 1080p@60 Hz, Deep Color up to 36-bit •• Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio •• Supports HDMI cable distances of up to 10m input and 10m output Front CPRO-8E 153 HDMI HDMI 4K2K UHD Splitters / Multiplexes FEATURES •• HDMI and DVI compatible •• Fully HDCP compliant •• Supports 3D •• Supports HDTV resolutions up to 4K×2K@30 Hz •• Supports PC resolutions of VGA to WUXGA •• Supports 1080p@60 Hz, Deep Color 12-bit •• Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio •• Supports HDMI cable distances of up to 10m input and 10m output with Active Network Channel LKV314PRO Back 10 Section 10 HDMI SPLITTER / MULTIPLEXER / SWITCHES Professional HDMI Splitter / Multiplexers MODEL CODE TYPE HDMI12MP HDMI14MP HDMI18MPS 1 In 2 Out 1 In 4 Out 1 In 8 Out The CYP HDMI v1.3 Distribution Amplifier series is the most advanced solution for HDMI signal distribution. Each product in this series is compatible with HDMI v1.3 specifications, supports Deep Colour (8-bit and 12-bit) video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio with a high bandwidth up to 225MHz (6.75Gbps). This product acts as a signal amplifier and provides high performance I/O audio and video. FEATURES •• HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant, 3D compliant •• Supports Deep Colour video up to 12 bits, 1080p at 60Hz •• Splits audio and video from one HDMI input source simultaneously to 2, 4 or 8 outputs without signal loss •• Supports DVI source and DVI display using HDMI to/from DVI adapter cable •• Supports a wide range of PC and HDTV resolutions from VGA to UXGA and 480i to 1080p •• Writes the lowest timing supported among connected displays to memory, allowing the source device to send the optimum resolution to each display Front HDMI12MP Back Front HDMI14MP Back Front Back HDMI18MPS HDMI Switches MODEL CODE TYPE HDMI31SDY HDMI51SDY 3 In 1 Out 5 In 1 Out The HDMI v1.3 switches allow various HDMI sources to share one HDTV display. 3D compatible. HDMI31DY HDMI51DY Audio Video Hardware FEATURES •• HDMI 1.3, HDCP1.1 and DVI1.0 compliant •• Supports 30/36/48 bit colour depth display •• Supports high definition audio - Dolby Digital TrueHD and DTS-HD •• Auto signal enhancement feature improves the signal quality of long distance transmissions •• LED indicators •• Ideal for home theatre integration •• Supports high resolution input - PC: VGA, SVGA, XGA, SXGA, UXGA (1600 x 1200) and (1920 x 1200) HDTV: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p •• Selection made with remote control (included) or input selection button on front panel •• Easy to install and operate 154 10 Section 10 HDMI MATRIX SWITCHES / EXTENDERS / SPLITTERS HDMI 4x4 Matrix Switch HDMI 4x2 Matrix Switch MODEL CODE TYPE MODEL CODE TYPE HDMI4X4S 4 in 4 out Matrix Switch HDMI4X2SDY 4 In 2 Out Matrix Switch The HDMI4x4S is a true 4 input/4 output matrix HDMI switch. This switch allows any input to display on one or multiple output ports. 3D compatible Audio Video Hardware FEATURES •• HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant •• Supports digital video formats in Deep Colour mode at up to 36 bit (12bits/colour) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio and LPCM7.1 •• Supports input source LED indicators on each output selection •• Compatible with all HDMI sources and displays •• Supports PC and HDTV resolutions from VGA to UXGA and 480i to 1080p •• Supports RS-232 control •• Supports IR remote control and IR extender •• Dolby Digital, DTS digital audio transmission (32 - 192 kHz Fs sample rate) •• HDMI cable distance test with 1080p/8 bit & 12 bit resolution, the input/ output can run up to 15M •• High performance matrix of 4 inputs and 4 outputs •• Re-timed & level compensated HDMI signal progress through the system •• Switchable EDID function •• Includes remote control The 4x2 HDMI matrix switch is with 4 HDMI inputs and 2 HDMI outputs. It is a true matrix and can distribute any one of 4 sources to either of 2 displays, and can work as a splitter to show the same source on 2 displays simultaneously. It is HDMI v1.3 and supports full HD 1080p. 3D compatible FEATURES •• 4X2 HDMI matrix swtich LKV342 distributes any one of 4 sources to either of 2 displays or to both 2 displays simultaneously •• Compatible with full HD 480i, 480p, 576i, 576p, 720p, 1080i and 1080p •• Switch easily between multiple HDMI sources via remote control or via buttons on the unit Front Back HDMI Matrix Switch, Extender over Cat6 HDMI Splitter Combo, Extender over Cat6 MODEL CODE TYPE MODEL CODE TYPE HDMI4H4C6 HDMIC6RIR 4x HDMI Input 4x Cat6 Output Cat6 Receiver with IR HDMI1H4C6 HDMIC6RIR 1 In 4 Out (HDMI + 3x Cat6 with IR) Cat6 Receiver with IR „„ Cat6 Receiver required per output device „„ Cat6 Receiver required per output device FEATURES •• High performance HDMI 1.3 matrix •• HDMI 1.3, HDCP1.1 and DVI1.0 compliant, 3D compatible •• Supports digital video formats in Deep Colour mode at up to 30 bits •• Supports input source LED indicators on each output select •• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission (32-192kHz Fs sample rate) •• Supports a wide range of PC and HDTV resolutions •• Compatible with all HDMI sources and displays •• Supports RS-232 control •• HDMI cable distance test with 1080p/8 bits resolution output can run 15M to 20M, with 1080p/12 bits output can run up to 15M •• Switchable EDID function •• IR remote control •• Re-timed and level-compensated with HDMI signal progress FEATURES •• HDMI 1.3, HDCP1.1 and DVI1.0 compliant, 3D compatible •• HDCP keysets allows each output to work independently •• Splits an HDMI source up to 4 outputs without signal loss •• Supports DVI source and DVI display •• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus & DTS-HD Master Audio transmission (32-192kHz Fs sample rate) •• Supports PC and HDTV resolutions from VGA to UXGA and 480i to 1080p •• HDMI cable distance test with 1080p resolution: output can run up to 10M/5.1CH •• IR remote control Front Front Back Back HDMI1H4C6 155 10 Section 10 VIDEO CAT5E/CAT6 EXTENDERS / INLINE EXTENDER / ENHANCER HDMI Cat5e/6 Extender HDMI & IR Dual Cat6 Cable Extender MODEL CODE TYPE MODEL CODE TYPE HDMIC373 HDMIC373R Transmitter & Receiver Kit Receiver HDMIC6TIR HDMIC6RIR Transmitter with IR Receiver with IR FEATURES •• HDMI 1.3, HDCP1.2 compliant •• Full HD resolution support (1080p@60Hz/36-bit) •• Audio support up to DTS-HD/Dolby-true HD/LPCM7.1/DTS/Dolby-AC3/DSD •• Supports HDMI (including HDCP) over a single CAT5e/6 up to 120m •• Supports single source to multiple receivers (requires network switch with IGMP management feature) Extends an HDMI or IR signal using dual CAT6 cables FEATURES •• Compliant with HDMI 1.3, HDCP 1.1 and DVI1.1 standards •• Supports digital video formats in Deep Colour mode at up to 36 bits (12 bits/colour) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) Digital audio •• Supports infrared transmit and receive - IR cables included •• Supports high definition resolution: - at 1080p/8bits resolution the input/output source can run 30M - 45M - at1080p/12bits resolution the input/output source can run up to 15M Receiver HDMIC6TIR HDMIC6RIR HDMI Inline Extender HDMI Inline Enhancer MODEL CODE MODEL CODE HDMIEXTP30 HDMIENH HDMI HDCP 1.1 and DVI 1.0 compliant. Extends up to 60M (30M in 30M out) FEATURES •• Built-in TMDS equalizer and CDR for long cable support •• Support video resolutions up to 1080p@60Hz •• Capable of receiving and transmitting 2.25Gbps data •• Without extra power support and will get 2W of power from the input device FEATURES •• HDMI 1.3, HDCP1.1 and DVI1.0 compliant Receiver •• Deep color video up to 12bit, 1080p@60Hz •• Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission (32-192kHz Fs sample rate) •• Supports a wide range of PC and HDTV resolutions from VGA to UXGA and 480i to 1080p •• HDMI cable distance test with 1080p resolution: Input/Output source can run up to 30M/5.1CH •• Full HDCP Compliant Audio Video Hardware Transmitter 156 10 Section 10 OPTICAL AUDIO SOLUTIONS / AUDIO CONVERTER DisplayPort Extender / Splitter Mini DisplayPort Extender / Splitter MODEL CODE SIZE MODEL CODE TYPE CDP-13DPI 1 to 3 Port Display Port Splitter / Extender CMDP-13MDPI 1x Mini DisplayPort input & 3x Mini DisplayPort outputs Audio Video Hardware FEATURES •• Supports DisplayPort v1.1a, VESA DDM Standard, HDCP v1.3 and EDID v1.4 •• Supports link rates of 2.7Gbps (HBR) and 1.62Gbps (RBR) from the source. •• Supports output resolutions up to 1920 x 1200 •• Secured content protection with HDCP 1.3 for digital content including video and audio •• Plug and play FEATURES •• Supports DisplayPort v1.1a, VESA DDM Standard, HDCP v1.3 and EDID v1.4 •• Supports link rates of 2.7Gbps (HBR) and 1.62Gbps (RBR) •• Fully HD compatible and provides full display performance with zero lag and no display limitations •• Supports output resolutions up to 1920 x 1200 •• Plug and play Optical Audio Splitter Optical Audio Switch MODEL CODE TYPE MODEL CODE TYPE DCT-28 1x Optic Input, 4x Optic Outputs DCT-17 4x Optic Inputs, 1x Optic Output FEATURES •• LPCM 2CH audio signal and sampling rates up to 192kHz •• Supports Dolby Digital and DTS 2/5.1CH audio signals bypass •• Supports S/PDIF sampling rates of 32kHz to 192kHz •• Low power consumption FEATURES •• Audio signal and sampling rates up to 192kHz •• Supports PCM2, AC3/5.1, Dolby 5.1 & DTS 5.1 pass through •• Low power consumption Digital Optical Audio Cat5e/6 Extender Audio Converter MODEL CODE TYPE MODEL CODE CH-304KIT Transmitter & Receiver Kit DCT-3 FEATURES •• Supports Coaxial or Optical digital audio SPDIF signal •• Supports stereo and multichannel (7.1, DTS, DolbyDigital etc.) digital audio •• Supports industry standard Category 5e/6 cable •• Digital audio SPDIF performance sampling rate 96kHz •• Supports single Coaxial input to Coaxial signal output Coaxial/Optical to R/L audio converter is an easy to use product that converts Coaxial or Optical audio signals into R/L audio FEATURES •• Supports digital audio input (coaxial/optical) and analog audio output (R/L) •• Integrated digital interpolator filter and Digital to Analog Converter (DAC) •• Supports non-compression digital stereo audio input •• Supports SPDIF 24 bits of data for the left and right channel Front 157 Back 10 Section 10 HDMI AUDIO INSERTER / EXTRACTOR / LIP SYNC / CONVERTER / SCALERS HDMI Audio Inserter HDMI Audio Extractor MODEL CODE TYPE MODEL CODE TYPE HDMI-11CA HDMI Audio Inserter CLUX-11CD 1x HDMI input & 1x HDMI, 1x optical & 1x RCA outputs Insert an external audio signal into HDMI or DVI signal path. The HDMI audio extractor is a device that allows you to extract audio signals from a HDMI/DVI source. FEATURES •• Compliant with HDMI 1.3, HDCP 1.2 and DVI 1.0 •• Supports HDMI Sample Rates up to 192 kHz •• Supports Optical Sample Rate up to 48 kHz •• Supports TMDS clock frequency rate 225MHz •• Supports high-bit-rate (HBR) audio •• HDMI cable distance test with 1080p 8/12bit resolution, the input & output can run up to 10 meters •• Low power consumption •• 24 bit resolution FEATURES •• 1x HDMI input •• 1x HDMI, 1x optical & 1x RCA outputs •• Supports PCM2/5.1/7.1, Dolby 5.1, DTS 5.1, DD+, D-TrueHD, DTS-HD, PCM2, Dolby 5.1, DTS 5.1 & LPCM2 audio formats Analogue Lip SYNC Corrector SDI to HDMI HD Converter / Scaler MODEL CODE MODEL CODE DCT-18 HDMISDI Manually adjust the audio delay from 0~300 ms so you can perfectly synchronize your audio and video. Convert SDI or HD-SDI to HDMI FEATURES •• The L/R In-Out Lip SYNC Corrector is a compact device that corrects audio delays between audio and video. FEATURES •• Auto detect resolution of HD-SDI, SD-SDI and 3G-SDI •• Full HDMI supported with embedded audio •• Synchronized output audio video and audio •• SD-SDI signal max. distance 460m •• HD-SDI signal max. distance 230m •• Plug and play Front HDMI Up Scaler Composite RCA to HDMI Up Scaler MODEL CODE MODEL CODE HDMISB01 HDMISB363 FEATURES •• HDMI 1.2, HDCP 1.1 and DVI 1.0 compliant •• Automatically detect the factory setting of the connected display •• Supports 50/60 Hz frame rate conversion •• Provides output picture adjustment on contrast, brightness, hue, saturation, sharpness, RGB (color tone) level and aspect ratio size •• Supports high resolution output: PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA, WSXGA, WUXGA, SD/HD: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p FEATURES •• Compliant with HDMI and HDCP •• RCA Audio Video input •• HDMI output resolution supports up to 1080p @ 60Hz, 36 bits Back Front Front Audio Video Hardware Back Back 158 10 Section 10 HDMI CONVERTERS / UP SCALERS HDMI to Component Converter HDMI to DVI Converter MODEL CODE MODEL CODE MAX RESOLUTION HDMIHD02 HDMIFC05 1920x1080 FEATURES •• HDMI and DVI 1.0 compliant •• Supports 2 HDMI inputs and 2 audio outputs (digital coaxial, analog L/R) •• Supports HDMI input (8/10/12-bit), component output supports 8-bit •• Supports DVI input when using an HDMI to DVI adaptor •• HDMI audio input supports LPCM 2CH and supports sampling rates from 32 kHz to 192 kHz •• Component output support tri-level sync for 720p, 1080i and 1080p •• Built-in EDID FEATURES •• HDMI 1.2, HDCP 1.1 and DVI 1.0 compliant •• HDMI input and DVI (or HDMI, using proper cable/adapter) with Coaxial output •• Automatically detects the input format between digital RGB and YPbPre •• Supports input/output video resolutions up to UXGA (PC) or 1080p@60Hz (HDTV) •• Supports input/output of digital audio signals like LPCM, Dolby Digital or DTS •• HDMI signal amplification and equalization supported Front Back VGA to HDMI Up Scaler HDMI to VGA Converter MODEL CODE MODEL CODE HDMISB06 HDMIFC08 VGA to HDMI 1080p up scaler FEATURES •• HDMI 1.3, HDCP 1.1 and DVI compliant •• Supports HDMI input and analog PC or SD/HD output •• Supports output selection between YPbPr and RGB •• Max resolution: 1920x1200 •• Built in EDID FEATURES •• Up-scales VGA to HDMI 720p or 1080p; •• Supports VGA Input: 640x480@60/75Hz, 800x600@60/75Hz, 1024x768@60Hz, 1280x720@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1360x768@60Hz, 1440x900@60Hz, 1400x1050@60Hz, 1680x1050@60Hz, 1920x1080@60Hz. (Recommended input resolution: 1024x768@60Hz) •• Supports HDMI Output: 720P/60Hz, 1080P/60Hz; •• Auto-store setting of output resolution Front Back Back Audio Video Hardware Front VGA, Component and RCA to HDMI Up Scaler VGA to HDMI Up Scaler MODEL CODE MODEL CODE HDMISB353 HDMISB05 VGA+CVBS+YPbPr+audio to HDMI1080P/720p converter with scaler FEATURES •• Up-scales VGA to HDMI 720p or 1080p •• Supports high resolution output: PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA, WSXGA, WUXGA SD/HD: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p •• Supports stereo LPCM analog/digital audio input and stereo LPCM analog/digital output. FEATURES •• Compliant with HDMI 1.3 and HDCP •• Input: 1x VGA, 1x component video (Y Pb Pr), 3.5mm audio, RCA audio (R/L) •• Output: 1x HDMI (720p/50Hz/60Hz,1080p/50Hz/60Hz) •• Output is fixed at 1080P/720P to avoid compatibility issues •• PC VGA resolution up to 1280x960 (60Hz) •• Component video (YPbPr) resolution up to 1080P (50 Hz, 60 Hz) Front Front 159 Back Back 10 Section 10 MHL/HDMI CONNECTOR / VGA SWITCHES / VGA & DVI SPLITTERS 5 in 1 MHL to HDMI Connection Kit DVI / VGA Converters MODEL CODE MODEL CODE TYPE PROSHARE.MHL VC-DVID-VGA VC-VGA-DVID DVI-D to VGA Active Converter VGA to DVI-D Active Converter An innovative solution which incorporates multi-connection and Mobile High-denition Link (MHL) to view on a larger external display or projector. Directly import images, videos and document such as PDF, Word, Excel, etc. from your SD Card, Micro SD Card and USB via the multi-port connectors to your smartphone. FEATURES •• Input Connector: Micro USB Female x1 •• Output Connector: HDMI Female x1 •• Other port: Micro USB Female x1 for charging •• Charging current support:  1000~1500mA •• Compatible with Samsung Galaxy S2, Galaxy S2 HD, Galaxy Note, Galaxy S3, Galaxy Note 2 and higher models. Sony Xperia SX/GX FEATURES •• Select input between analog RGB and YPbPr manually. •• Select output between Bypass or digital RGB manually. •• Supports up to 1600 x 1200 @ 60 Hz for PC input and 1920 x 1080p @ 60 Hz for HD input. •• Built-in EDID Back Front VC-DVID-VGA Composite S-Video to WXGA Converter UXGA to Composite Converter MODEL CODE MODEL CODE VC105 VC200 Converts composite/S-Video (NTSC or PAL system) to XGA, SXGA and WXGA. It enables viewing of a DVD, VCR or game video source on a PC monitor. Converts a variety of computer images (from 640x480 up to 1600x1200) to interlaced NTSC or PAL video. Formats include composite and S-Video. FEATURES •• Automatically detects and down converts the incoming PC images to NTSC or PAL •• Resolution supported: UXGA (1600x1200 at 60Hz) •• Scales down PC video to composite/S-Video •• Image overscan/underscan selection Audio Video Hardware FEATURES •• Input connectors: Composite video (RCA jack) x1, 1 Vp-p 75 ohm/ S-video (mini-din) x1, 1Vp-p 75 ohm •• Input source selection •• Output connectors: D-sub 15 female (RGB 0.7Vp-p 75 ohm, H/sync. 3 Vp-p, V/sync. 3Vp-p) x 1 •• Output resolutions: XGA: 1024 x 768 @ 60Hz, SXGA: 1240 x 1024 @ 60Hz, WXGA: 1366 x 768 @ 60Hz 160 10 Section 10 VGA CAT5E/CAT6 EXTENDERS VGA CAT5 Extender VGA & Audio Cat5 Extender MODEL CODE TYPE MODEL CODE TYPE EV214 BK Video Extender Kit EVA214 BK EVA-214PLUS Video & Audio Extender Kit Video & Audio Extender Kit w/ EDID Copy The video extender links a transmitter connected by a Cat5e/Cat6 cable to a receiver to extend the distance between the PC and a remote monitor and speakers up to 150M FEATURES •• Ultra compact •• Extend VGA signals up to 150M •• Use Cat5e/Cat6 cables for easy installation •• Max. resolution 1024 x 768 at 150M, 1280 x 1024 at 100M •• Local unit supports two VGA outputs •• Remote unit supports two VGA outputs •• For broadcasts, demonstrations and exhibitions The video and audio extender links a transmitter connected by a Cat5e/Cat6 cable to a receiver to extend the distance between the PC and a remote monitor and speakers up to 150M FEATURES •• Ultra compact •• EDID copy function (EVA-214PLUS) •• EQ selector designed for optimum signal clarity (EVA-214PLUS) •• Extend VGA+ audio signals up to 150M •• Use Cat5e/Cat6 cables for easy installation •• Max. resolution 1024 x 768 @ 150M, 1280 x 1024 @ 100M •• Local unit supports two VGA + audio source outputs •• Remote unit supports two VGA + audio extension outputs •• For broadcasts, demonstrations and exhibitions Transmitter Receiver EVA214 BK VGA + Audio CAT5/6 Extender / Multiplexer VGA Cat5e/6 Extender MODEL CODE TYPE MODEL CODE TYPE EVA124L EVA128L EVA02R 1 In 4 Out Video & Audio Extender 1 In 8 Out Video & Audio Extender Remote Unit for EVA124L & EVA128L EV-1210L-BK VGA & Audio Over LAN Extender Audio Video Hardware The video and audio extender links a transmitter connected by a Cat5e/ Cat6 cable to multiple receivers to extend the distance between the PC and 4/8 remote monitors and speakers up to 150M FEATURES •• Extend and distribute 4/8 VGA+ audio signals up to 150M •• Use Cat5e/Cat6 cables for easy installation •• Max. resolution 1024 x 768 @ 150M, 1280 x 1024 @ 100M •• Local unit supports two VGA + audio source outputs •• Remote unit supports two VGA + audio extension outputs •• For broadcasts, demonstrations and exhibitions FEATURES •• Supports VGA, SVGA and Multisync monitors •• Transmit VGA signals via CAT5 cables •• Gain (equalization) control selector designed for optimum signal clarity •• Extends video signal up to 150m •• Supports resolution of 1280 x 1024 over CAT5 cable •• No software or drivers required and easy to install •• Supports remote user Front Back Back Front 161 10 Section 10 VGA SPLITTERS / SWITCHES VGA/XGA Splitters DVI Splitter MODEL CODE TYPE MODEL CODE TYPE VSA-P12 VSA-P14 VSA-P18 2 Port 4 Port 8 Port VSD-102 VSD-104 VSD-108 2-Port DVI Splitter 4-Port DVI Splitter 8-Port DVI Splitter The VGA/XGA multiplexers duplicate and amplify PC signals for transmission to multiple monitors over distances of up to 65M with support for bandwidths of up to 350 MHz. FEATURES •• Supports 350MHz maximum bandwidth, suitable for XGA, SVGA, VGA and multisync monitors •• Duplicates video signals to 2/4/8 monitors •• Gain control switch for optimum quality •• 5V DC power adapter included FEATURES •• Duplicates 1x Video input to multiple DVI outputs •• Automatic power-save when DVI input is lost •• Supports VGA, SVGA & multisync monitors •• Cascaded operation for increased DVI outputs •• Supports EDID and HDCP •• Rack mountable (4/8 Port) Cables sold separately C-DVI-D series cables required Front VSD-104 Back VSD-108 VGA & Audio Switch 4/8 Port VGA Switches MODEL CODE TYPE MODEL CODE TYPE VSVA-401 4 Port VGA & Audio Switch VSA-401 VSA-801 4 Port 8 Port FEATURES •• 4x video input •• Signal input: HDB15-M x 4, audio jack x 4 sets •• Signal output: HDB15-F x 4, audio jack x 4 sets •• Full HD 1080p (1920 x 1080), WUXGA (1920 x 1200), 1920 x 1440 •• Remote control (optional) •• Serial control •• Max. power consumption: 4.5W •• Dimensions: 220 x 34 x 100 (W x H x D (mm) Front Front Back Back Audio Video Hardware FEATURES •• Switches 4 or 8 VGA input to one monitor •• Supports VGA resolution up to 1920x1440 •• Supports VGA, SVGA & multi-sync monitors •• Operated by hot key & PS/2 keyboard •• Supports 2x VGA outputs •• Auto-Scan detects linked computers •• LED shows active status of VGA input source 162