Transcript
HDBT 100M EXTENDER TRANSMITTER AND RECEIVER WITH RS232, Bidirectional IR Control, ETHERNET AND POE, support 4k*2k Introduction: This HDBT Extender uses CAT6 cable to transmit the signal of blue ray DVD, Player, PC and so on. It supports highest resolution 4kx2k, the max distance can be 100 meters. It supports bi-directional IR control, RS232, with POE function,ultrathin design. No loss of quality, installs in minutes and stabilize in product. This HDMI Extender is with high practicability and can be used in major projects, conference rooms and other places. Specifications: * Support HDMI 1.4 Version * Support 3D video format * Support the highest resolution : 3840x2160/30Hz,(1080P/60Hz,1080i,720p) *Support the sampling frequency of sound: 44.1KHz ,48KHz * Support 36 bit deep color * Support the Max transmit distance over cat6 cable : 1) When input 1080P, the max distance is 100M 2) When input 4Kx2K, the max distance is 70M * Support bidirectional IR control, control the input resource devices and output displayer in receiving place * Support RS232 serial port * Support POE function * Power adaptor: DC12V/2A * Net Weight: 270g(TX) , 275g(RX) * Dimension(L x W x H): 138x84x19mm *ultrathin design Physical Connection Showing Picture
1: 2: 3: 4: 5: 6: 7: 8: 1:
DC 12V power supply Power indicator RS232 Port HDMI input port IR Receiver and IR transmitter port Ethernet Port TX and RX connection status indicator HDBT output Port DC 12V power supply
2: Power indicator 3: RS232 Port 4: HDMI output Port 5: IR Receiver and IR transmitter port 6: Ethernet Port 7: TX and RX connection status indicator 8: HDBT input Port Note: The extender supports POE function, as shown in picture: DC 12V power adapter connected to TX, power over ethernet to the RX. When the resolution is 1080P , the max distance is 100M ( Cat6) When the resolution is 4Kx2K ,the max distance is 70M ( Cat6)
Installation Guide 1. Connect the HDMI source device and HDMI Transmitter with HDMI cable. 2. Connect the HDMI receiver and the display device with HDMI cable. 3.Connect the HDBT port of HDMI receiver and HDMI transmitter with Cat-6 cable, it can be up to 100 meters. 4.Bi-directional IR control : Connect the IR receiver into the IR RX port of HDMI transmitter, then Connect the IR transmitter into the IR TX port of HDMI receiver , make sure the IR transmitter aim at the controlled device’s IR receiver. 5.Connect power adapter to the device, power indicator appear red all the time.When HDMI transmitter connects well to the HDMI receiver with Cat 6 cable, the LINK indicator appears green all the time, that means the Extender works well.
The Package includes: * * * * * *
1x HDBT Transmitter 1x HDBT receiver 2x 12V/2A power supply 2x IR-TX cable 2x IR-RX cable 1x User Manual
