Transcript
HDMI CAT5E Extender Over a Single Cable Product Code: HDMIEXT The HDMIEXT Extender utilises a single Category 5e/6 cable to extend a HDTV display up to 60 metres at 1080i and 40 metres at 1080p. It’s equipped with HDMI connectors and also supports DVI equipment using a HDMI to DVI adapter; providing an easy and flexible cabling solution for integrating home theatre components.
Extends HDMI signal over a single Category 5E/5e/6 cable HDMI 1.3 compliant, 3D capable Transmission range up to 60m at 1080i/720p resolution or 40m at 1080p resolution Works with passive receiver No external power required for the HDMIEXT Receiver unit Package includes 1x HDMIEXT Transmitter, 1x HDMIEXT Receiver and 1x Power Adapter
Installation Schematic
Panel View & Functions HDMIEXT Transmitter
Default EDID Setup Set DIP switch 1 Off ↑ Set DIP switch 2 Off ↑ Select the first default EDID: Supports 1080i / LPCM 2 Channel Set DIP switch 2 On ↓ Select the second default EDID: Supports 1080p / LPCM 5.1 Channel
www.geniecctv.com
Use an External EDID Set DIP switch 1 On ↓, Unplug the power to the HDMIEXT Transmitter Connect the HDMIEXT to the TV HDMI connector for auto backup Re-connect power to the HDMIEXT; TV EDID back up completed (Blue Power LED keeps flashing) After completion of the TV EDID backup the HDMIEXT power must be reset (unplug and reconnect) to activate the new EDID Transmitter Unit LED Status BLUE ON Flashing RJ45 Connector LED GREEN ON YELLOW ON
Power On TV EDID backup completed Sending power or video to receiver unit No data input or unsupported video format
Dip Switch Functions 1
↑ ↓
2
↑ ↓
Use the default EDID Use an external TV EDID Select the first default EDID: supports 1080i / LPCM 2 Channel Select the second default EDID: supports 1080p / LPCM 5.1 Channel
NB: After completing the Dip Switch settings, power must be reset (unplug and reconnect) to activate the new EDID. HDMIEXT Receiver
HDMIEXT Receiver Unit LED Status GREEN ON YELLOW ON
Sending power or video to receiver unit No data input or unsupported video format
Cable Link cable using high quality Category 5e or Category 6 UTP cable Category 6 cable is recommend for distances over 30 metres Do not use STP (shielded twisted pair) cable Transmission Distance The transmission distances will be affected by the quality of the UTP cable and HDMI components being used. Lower resolution and good quality cable may extend the distances beyond those quoted. HDMIEXT Resolution/Cable Distance in Metres 1080p/Category 5e 40 1080p/Category 6 45 1080i,720p/Category 5e 60
www.geniecctv.com
RJ45 Definitions Video Link (use TIA/EIA-568-B) 1. Orange-White TMDS DATA2 + 2. Orange TMDS DATA2 3. Green-White TMDS CLOCK + / HDMI 5V 4. Blue TMDS DATA1 + 5. Blue-White TMDS DATA1 6. Green TMDS CLOCK - / HDMI 0V 7. Brown-White TMDS DATA0 + 8. Brown TMDS DATA0 -
Caution Keep the cabling away from any equipment with electromagnetic energy, such as microwave ovens, mobile phones, radio equipment, power lines. Our HDMI CAT5E Extender is not a networking product. To avoid damage DO NOT connect to any Ethernet enabled device. Specification HDMIEXT Video Bandwidth Resolution Link Cable Distance Input TMDS Signal Input DDC Signal HDMI Connector Link Connector Power Consumption Power Supply Temperature Dimensions (mm) Weight (g)
Transmitter
Receiver
2.25 Gbps (HDMI 1.3) 480i/p, 720p, 1080i/p @ 24/50/60Hz Category 5e 60m @1080i, Category 5e 40m @1080p 1.2 volts Peak to Peak 5 Volts Peak to Peak HDMI 19-pin Female Connector RJ-45 Shielded with 2 Indication LED’s 1200mA (Maximum) X DC5V 2A Regulated (External) X Operation: 0 to 55℃, Storage: -20 TO 85℃, Humidity: up to 95% RH 67 x 91 x 27 57.5 × 24 × 20.2 140 20
Rev. C
www.geniecctv.com
