Transcript
WYRESTORM PRODUCT SPECIFICATION SHEET
HDMI Extension using Single Cat5e/6 to 50m/164ft EX-1UTP-IR-50: Single Cable HDBaseT Extenders with bidirectional IR & EDID Management
Key Features: • •
WyreStorm’s most affordable HDBaseT extender set solution available to date, offering reliable transmission of full HD and 3D video, and HD audio over 50m/164ft. 2-way IR enables control of both the source and display with built-in EDID management.
The EX-1UTP-IR-50 is the entry level model in WyreStorm’s HDBaseT extender range, designed to offer integrators a low-cost, reliable and feature rich transmission solution for shorter distances up to 50m/164ft. Comprising of a Class B HDBaseT Transmitter and Receiver, the EX-1UTP-IR-50 extender enables distribution of uncompressed full HD 1080p video, multi-channel HD audio and bidirectional IR control to display zones using a single Cat5e/6 cable.
Additional Features & Benefits: • • • • •
Distributes fully uncompressed HD 1080p video at 60Hz, HD multi-channel audio with 2-way IR control up to 50m/164ft using one Cat5e/6/ cable. Transmits wide-band, two-way IR control signal together within the single Cat5e/6/ cable. EDID management on Transmitter and DIP setting on Receiver aids communication between sink device and source. Cable termination follows IEEE-568B standards HDCP compliant
• • • • •
Fully supports 3D video applications - frame packing (Bluray) and stereoscopic (satellite and cable broadcasts). Supports 36bit deep color LED indication for visual power and HDBaseT link status. Cascadeable over the Cat5e/6 cable to lengthen transmission and increase distribution capabilities. Automatically adjusts feedback, equalization and amplification of signal for easy installation.
in the box 1. 2. 3. 4.
1 x WyreStorm EX-1UTP-IR-50 Transmitter 1 x WyreStorm EX-1UTP-IR-50 Receiver 1 x Printed quick start installation guide 2 x pairs of balun mounting brackets
5. 2 x 5v DC power supply 6. 1 x IR Transmitter 7. 1 x IR Receiver
US OFFICE:
EMEA OFFICE:
TEL: +1 901 384 3575
TEL: + 44 (0) 1793 230 343
FAX: +1 901 384 3574
FAX: + 44 (0) 1793 230 583
WYRESTORM PRODUCT SPECIFICATION SHEET
SPECIFICATIONs 120mm/4.72” x 24mm/0.94” x 101mm/3.97”
Dimensions (WxHxD):
Weight: 0.36kg / 0.79lb (Transmitter) / 0.36kg / 0.79lb (Receiver) Operating Temperature Range:
-5 to +35°C (-41 to +95 °F)
Operating Humidity Range:
5 to 90 % RH (no condensation)
Video Amplifier Bandwidth:
6.75Gbps
Input Video Signal:
0.5-1.0 volts p-p
Input DDC Signal:
5 volts p-p TTL (Transmitter), 5 volts p-p TTL (Receiver)
Maximum Single Link Range:
1080p 36bit colour depth
HDMI Transmission Distance:
1080p signal up to 15m/ 49ft HDMI
Video Format Supported:
VESA: 640x480, 800x600, 1024x768,1280x1024,1600x1200, 1920x1080, 1920x1200
DTV/HDTV: 480i/576i/480p/576p/720p/1080i/1080p
Output Video:
HDMI 1.4+HDCP (Sink mirrors source), including 3D - frame packing (Blu-Ray) and Stereo
-scopic (Satellite/Cable broadcasts)
Audio Format Supported:
DTS Master HD, Dolby True HD, multi-channel 5.1, 7.1, stereo
Transmission Distance:
1080p signal up to 50m / 164ft (Under perfect transmission conditions including straight
cable runs with no electrical interference, kinks, patch panels or wall outlets.)
Power Consumption:
2.5 Watts (Transmitter) 5 Watts (Receiver)
British Thermal Unit (BTU):
25.59
NOTE: Although WyreStorm products are tested with Cat5e, we recommend Cat6 due to increased bandwidth and improved capacity for handling large transmissions and power along a single cable.
COntrol System
DISPLAY OUTPUT
hdmi
hdmi
ir tx cable
ir rx ir link cable
SOURCE DEVICE
5v power
5v power
cat 5e cable up to 50m (164ft)
RECEIVER
TRANSMITTER
ReQuest Audio Switzerland AG
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance
Follow us on Twitter @WyreStorm1
For additional product information visit www.wyrestorm.com For technical support contact: US: +1 901 384 3575 EMEA: +44 (0) 1793 230 343
Watch us on Youtube WyreStormHD
Like us on Facebook WyreStorm Technologies
Connect with us on LinkedIn WyreStorm Technologies
