Transcript
HDMI to DisplayPort with USB Power - Black
P/N: HDMIDP
G4-0009A
Congratulations for owning a gofanco product. Our products aim to meet all your connectivity needs wherever you go. Have fun with our products! Please read this manual carefully before first use. If you need more information about our products, please visit www.gofanco.com. For technical support, please email us at
[email protected].
Introduction The gofanco HDMI to DisplayPort with USB Power - Black (part# HDMIDP) converts an HDMI output signal to DisplayPort output at up to 4Kx2K resolution.
Features & Specifications
Compliance: HDMI 1.4 / DP 1.2
Connectors: 1x HDMI, Male & 1x USB Type-A, Male (Input)
Resolution: Up to 4Kx2K@30Hz
Audio: Up to 7.1-channel
Power: USB bus-powered
1x DisplayPort, Female (Output)
3
Built-in cable length: 7.68" (HDMI & USB)
Dimensions: 2.20" (W) x 0.59" (H) x 1.30" (D)
Weight: 0.10 lbs (45g)
Package Contents
HDMI to DisplayPort with USB Power - Black
User's guide
4
Product Layout
DisplayPort Out
USB Type-A
HDMI 5
DisplayPort Output: Connects to a DisplayPort monitor/ display with a DP cable (not included)
USB Type-A: Connects to a USB port for additional power
HDMI: Connects to your HDMI output source
Hardware Installation NOTE: To achieve 4Kx2K output, make sure this standard is supported by your display. 1. Insert the HDMI connector to an HDMI output source, and USB to a USB port. (The USB connection is optional but recommended for power) 6
2. Connect the monitor's DisplayPort cable (not included) to the adapter's DisplayPort output. 3. Now, it is ready for use.
Application For power
DP Cable (not included) DP Display
HDMI Source (desktop or laptop)
Figure 1: Application diagram 7
Thank you for choosing gofanco
www.gofanco.com
