Transcript
HDMX SERIES SWITCH, CONVERT & EXTEND ANY INPUT TO ANY OUTPUT
HIGH DEFINITION MATRIX: HDMX-16 OR HDMX-32
3G HD HDMI WITH HDCP DVI VGA COMPONENT S-VIDEO COMPOSITE CATx (HDBT) FIBER
• CATx extension: up to 100 meters • Fiber extension: MM up to 300 meters and SM up to 10 km • Modular blades come in 4 inputs or 4 outputs • Switches video and audio separately • Redundant hot-swappable power supplies • Control and monitor via front touch panel, GUI or CLI • Compatible with Optiva CATx and VX Pro Series transmitters and receivers
SWITCH, CONVERT & EXTEND ANY INPUT TO ANY OUTPUT HDMX-16 Main Frame, up to 16 inputs and 16 outputs, Dual redundant power supplies HDMX-32 Main Frame, up to 32 inputs and 32 outputs, Dual redundant power supplies HDMX-4HDMI-I Quad HDMI Input, HDCP 1.2, Embedded audio support HDMX-4HDMI-O Quad HDMI Output, HDCP 1.2, Embedded audio support HDMX-4DVI-I Quad DVI Input, Up to 1920x1200 support, HDCP 1.2 HDMX-4DVI-O Quad DVI Output, Up to 1920x1200 support, HDCP 1.2 HDMX-4-3GHD-I Quad 3G HD Input, SMPTE 424, 292 and 250M, Embedded audio support HDMX-4-3GHD-O Quad 3G HD Output, SMPTE 424, 292 and 259M, Embedded audio support
HDMX-4CV8A-I HDMX-4CV8A-O HDMX-4V8A-I HDMX-4V8A-O HDMX-4VGA8A-I HDMX-4VGA8A-O HDMX-FIBER-I HDMX-FIBER-O HDMX-CATx-I HDMX-CATx-O
Quad Component Video Input with 8 stereo audio, Up to 1080P video Quad Component Video Output with 8 stereo audio, Up to 1080P video Quad Composite Video Input with 8 Analog Audio, RCA connections Quad Composite Video Output with 8 Analog Audio, RCA connections Quad VGA Video Input with 8 stereo audio, Up to 1920x1200 video Quad VGA Video Output with 8 stereo audio, Up to 1920x1200 video Quad Optical Input, LC connectors Quad Optical Output, LC connectors Quad CAT5/6 Input, RJ 45 connectors Quad CAT5/6 Output, RJ 45 connectors
HDMX-16 Additional Blade Options: Component w/ Audio Composite w/ Audio VGA w/ Audio
HDMI Input
Control via LAN or RS-232
(Ch. 1 to Ch.4)
HDMI Output
DVI Input
(Ch. 1 to Ch.4)
(Ch. 1 to Ch.4)
DVI Output
3G HD Input
(Ch. 1 to Ch.4)
(Ch. 1 to Ch.4)
3G HD Output
Fiber Input
(Ch. 1 to Ch.4)
(Ch. 1 to Ch.4)
CATx Output (Ch. 1 to Ch.4)
Dual Redundant Power Supplies Power/signal indicator 8 Channel Analog Stero Audio Blades
Video input: HDMI 1.3b, DVI-D, VGA, Component, Composite Video connectors depending upon blade type: • Quad HDMI • Quad DVI • Quad Composite Video and Audio • Quad Component Video input port: • Maximum resolution supported = 1080p or 1920x1200 • Maximum color-depth = 24 bits per pixel (8 bits per color) • Maximum refresh rate = 60Hz @ 1920x1200 Audio support: • Embedded audio in the HDMI 1.3b signal. All 8 channels (if present) of embedded HDMI audio are supported and should pass them through the system • Embedded audio in 3G HD per SMPTE specifications • 8 channel analog audio blade (to break away audio from video) • Input/output voltage: 2V peak-to-peak • Impedance: 600 Ohms or 10K Ohms • Coupling: AC • Sample rate: 48KHz • Signal resolution: 24 bit stereo audio • Frequency response: 20-20KHz, (@-3dB) • Audio Connector type: terminal block Compliance and Communication Protocols • EDID/DDC support: EDID/DDC is managed by switch and connects to appropriate display/receiver device. • HDCP compliance: HDCP 1.2 • CEC: real-time communication
Optical Specifications • Connector input/output: LC • Fiber type: Single mode and multimode • Optical loss budget: < 12 dB • Distance: • Single mode- up to 10 Km • Multimode- up to 305 meters on OM3 fiber • Optical data rate: 6.25 Gbps per port CAT 5/6 Specifications • Connector input/output: RJ 45 • Cable supported: High quality CAT5e, Cat6, CAT6e, CAT7, UTP / STP or FTP • Distance: Up to 100 meters on single CAT 5/6 cable • Data rate: 6.25 Gbps General • Chassis spacing: Single slot • Weight: TBD • Operating temperature: 0-50C • Humidity: 0-95% non-condensing
Opticomm-EMCORE 2015 Chestnut St. Alhambra CA 91803 P 626.293.3400 | F 626.293.3427 |
[email protected] EMEAI +34 666206662 |
[email protected] www.opticomm.com | www.emcore.com California | Virginia | Europe | Asia
