Preview only show first 10 pages with watermark. For full document please download

Headphone Music Controller Charging The

   EMBED

Share

Transcript

Blaze Light-Up Earbuds 7199-70 Microphone Music Control Unit Micro-USB charging input port Headphone Music Controller Charging the Headphones A. Music Controller Unit: - Single press: Play/Pause, - Double press: Next track - triple press: Previous track B. Phone Operation: - Single press: Answer/End call - Press and hold: vocal search function C. Microphone D. Light-Up - Turn on: press and hold button, lights will come on for one long blink then two quick blinks. - Turn off: press and hold button, lights will blink fast twice, then hold for one long blink. - Light up cord reacts with audio vibrations. Make sure to fully charge the headphones before using. Use the provided Micro-USB cable to charge the device. Plug the Micro-USB end of the cable into the charge input port, and the USB end into either a computer USB port to a wall adapter. A light will shine red when charging, and turns off when charging is complete. Safety Information: WARNING: This product uses flashing lights that may cause a reaction for those who have photosensitive epilepsy. • Avoid sources of intense heat or flames • Do not use near or around water for this could create electric shock. • Never disassemble product in order to make repairs, instead seek professional consultation. Tech Specifics • • • • • • • • • • • • 3.5 mm stereo in-ear ear plugs Built-in polymer battery (55 mAh) Cable control function Phone hands-free function Flashing lights along with the music rhythm Low power LED technology Charging time: about 1.2 to 1.5 hours Full charge for the lights last 3 to 4 hours Sensitivity: 105 db +/- 3 db Impedance: 32 ohms +/-15% Frequency corresponding: 20Hz-20K Hz Cable length: 110 cm + 5 cm