Helmut Singer Elektronik

Transcript

With compliments Helmut Singer Elektronik www.helmut-singer.de [email protected] fon +49 241 155 315 fax +49 241 152 066 Feldchen 16-24 D-52070 Aachen Germany With compliments Helmut Singer Elektronik www.helmut-singer.de [email protected] fon +49 241 155 315 fax +49 241 152 066 Feldchen 16-24 D-52070 Aachen Germany FUNCTION GENERATORS & W AVEFORM SYNTHESIZERS 1 mHz to 21 MHz Syntheslzed Function/Sweep Generator HP 3324A .. . Multi-lnterval sweeper . Two-phasesignals With compliments Referencesource Functiongenerator .60 MHz TTL clock ""i;:-:i~.. HP 3324A Helmut Singer Elektronik www.helmut-singer.de [email protected] fon +49 241 155 315 fax +49 241 152 066 Feldchen 16-24 D-52070 Aachen Germany ii~ ~!~~~;P' ~. The HP 3324A Syntheslzed Function/Sweep Generator The HP 3324A complements HP's farnily of synthesizedfunction generators. It combines good synthesizerquality with extendedsweep capabilities, at a low price. Multl-ln'e".1 Sweeplng Tbe 3324A offers the capability to define up to SOdifferent sweep intervals, each containing its individual sweep parameters, such as start and stop frequency. sweeptime, linear or logarithrnic sweepand marker frequency. Up to 100 intervals can be sequenced.becauaethe repetition of intervals is possible. Tbe foUowing example shows4 different intervals of a sequenceof 5. Intervall is alinear up-sweepfoUowedby interval2 which has the samestart-frequency and stop-frequency. Interval3 representsa logarithrnic sweep;it is repeated at the end of the sequence.Interval 4 is linear down-sweep.Tbe complete sequenceis generatedoncein single mode or continuoualy in continuous mode. - ~~" ~f ~ j.' -, j, Tbe sweepis performed phase-continuous,evenif stop-frequencyand start-frequency of succeedingintervals are not equal. For those applications which require a bettet stability than 5 ppm/year. a high stability frequency referenceoven provides a stability of 0.05 ppm/week (optiona!). Good spectral purity With compliments.doc In addition to the highly stable frequency the HP 3324A provides good sinewavespectral purity with -50 dBc phasenoise and -55 dBc spurious signals. The clock generator (1 mHz to 80 MHz) Complextest set-upscanbebui!t only if a reliableclackgenerator minimizesjitter or timing uncertainties.Tbe HP 3324A provides clack frequencies from 1 mHz up to 60 MHz -synthesizedover the ful! frequencyrange. Automatic phase calibr8tion Two 3324A can be usedto generatephaserelatedsignals.After power-on,the phasebetweenthe two instrumentsis arbitrary. Time-consumingphaseadjustments canbe avoidedwitb the automatic phasecalibrationoptions.Justenterthe requiredphaseoffset, and tbey calibrate to tbis valueafter a simplekeystrokeor HP-IB command. High Output Voltage If more than 10 V (pop) amplitude is required then the Higb Voltage Option enhancesthe amplitude range up to 40 V (pop) (limited fot frequencies up to I MHz). Structured Front Panel The HP 3324A 's front panel is clearly structured and is supported by an alphanumeric ftuorescensedisplay. The status of tbe instrument can be seen immediately, as all of tbe selectedparameters and functions are displayed. The A.ference Soure. Waveforms Sine. Square, Triangle, negative and positive Ramps. DC, TrL clack Many applications, like PLL testing and calibration of measurement instruments, require a frequency reference which can bc accurately tuned and which is stahle over a lang period of time. Tbe accuracy and stability of tbe HP 3324A fulfills this requirement. Specificatlons For complctc specificationsrcfcr to tbc HP 3324A data sbeet(Pub. No. 5952-9678). With compliments Helmut Singer Elektronik www.helmut-singer.de [email protected] fon +49 241 155 315 fax +49 241 152 066 Feldchen 16-24 D-52070 Aachen Germany Frequency Range Sine: Square: Triangle/Ramps: Auxiliary TTl clock.: Resolution 1 mHz. 21,000,000,0 MHz 1 mHz - 11,000,000,0 MHz 1 mHz. II,(MK),OOO,O kHz 1 mHz. 60,(MK),OOO,O MHz I mHz for up to 999,999,999 kHz, 100 mHz far 1 MHz up to 21.000,000,0 MHz Accuracy: '" 5 ppmof selectedvalue,200to 300 C St8bility :!o5 ppm/year,200to 300C, standard(seealsooption001) Main Signal Output Imped8nce:50{! Amplitude (all w8veform8except Auxili8ry TTL clock) Range: I mV to 10 V (pop) in 8 amplitude ranges, 1-3-10 sequence. Resolution: 4 digits (0.03% of füll range) Accuracy (witbout DC offset) Sine ImHz-lOOkHz: 2: 3 V (pop) :i: 0.2 dB > 1OOkHz-21 MHz: 2: 3 V (pop) :i: 0.4 dB Squarew.ve ImHz-lOOkHz: ~ 3 V (pop) :i: 1.S% lOOkHz-lOMHz: ~ 3 V (pop) :i: 5% Triangle 1mHz-2kHz: Auxlliary Outputs SYNC output Phasesynchronoussquarewavewith same frequency as maiD signal output, output impedance:50 Ohm Auxiliar, treq. output: Square, freq. range: 21 MHz to 60 MHz X-Axi. drive output: Linear TampproJX)nional to sweeptime Z-Axl. blank output Output signal depending on sweepstate. Sweep marker output Pulses(TTL and CMOS compatible) at selected marker frequencies 1 MHz reterence output ] MHz squarewavefor phaselocking additional instruments to thc HP 3324A, output impedance:50 Ohm, output amplitude: 0 dem. Auxiliary Input A.terence input For phase]ockinl the HP 3324A to an external frequencyrcfercnce.Signalfrom 0 dem to 20 dem into 50 Ohm. HPIBInterface Functions Interface functions: SH I ,AH I, T6,L3,SR I,RL 1,PPO, DCI,DTO,CO,E2 Option 001, High StabUl1yFrequencyReference Agingrate :!: 5 x 10-8/week after 72 hours continuous operation. :!: I x 10-7/month after 15 days continuous operation. 10 MHz o.en output 10 MHz squarewavefoTphaselockingadditional instruments to the HP 3324A, output impedance:50 Ohm, output level: > 4.5 dBm ;? 3 V (pop) '*' 1.5% 2kHz-10kHz: ;? 3 V (pop) %.S% Sinewave Spectral Purity PhaseNoise - 50 dB for a 30 kHz band centered on a 20 MHz carrier (excludins,*, 1 Hz about tbe carrier). Spuriou. All non-harmonically related output signals will be more tban 55 dB below tbe carrier. Sinew... harmonie diltortion Harmonically related sianals will be leIS tban tbe following levels relative to the fundamental: FrequencyRange .1 Hz-199kHz 200kHz - 1.99MHz 2 MHz - 14.9MHz 15 MHz - 20 MHz Maximum .wHp wldth (Httabte tor .ach int.rv"): full frequency range of the maiß signal output fOTthe waveform in use,except mini. mum log start frequency is I Hz. Phase contlnulty: sweepis phasecontinuous over the ful] frequency range of the maiß output. HarmonicLevel -60dBc - 40 dBc - 30 dBc - 25 dBc Waveform Characteristlcs Squarewavecharacteristics Rise/Fall time: (10%to 90%at full output) -< 20 ns Overshoot:5%of peakto peakamplitudeat full output Triangle/Rampcharacteristics Linearity (10%-90%.10kHz): %0.05% of full popoutput voltage Option 002, High Voltage Output Frequency range: 1 mHz to I MHz Amplitude 4 mV to 40 V (p-p) in 8 ranges,4-12-40 sequenceinto 500 Ohm, < 500 pF load. With compliments.doc Accuracy: :!: 2% of full output rOTeach range at 2 kHz. Flatness: :I, 10%relative to programmed amplitude. Wa.efonn characteristics Sinewaveharmonicdistortion Harmonicallyrelatedsignalswill be tbe sameas the standardinstrumentup to 1 MHz. Squarewavecharacieristics (typical,500Ohm, 500pF load) Rise/Fall Time: (10% to 90% ofp-p output voltage) oS 125 ns Overshoot: oS10% of pep output voltage Output Impedance:< 3 Ohmat dc, < 10Ohm at I MHz DC Offset 4 timesthe specifiedrangeof the standardinstrument Options 003 and 004, Automatie Pha.. Callbration These options provide automatic phase calibration if twO HP 3324As are connectedto generate phase related signals. Option 003 has to be installed info one of the instruments and option 004 into the other. Phaseshifted signals can be achieved by selection of a certain phaseoffset. DC Offset R8nge:dconly (no ac signal):0 to %5 VISOOhm Resolution:4 digits General Phase Offset Range Power: 100/120/220/240 V, 48 to 66 Hz. max. 100 VA Welght: 11 kg net Dimensions: 132.6 mm high x 425.5 mm wide x 497.8 mm deep % 719.90 with respect to arbitrary starting phase or assignedzero phase. See also option 003 and 004. Resolution: 0.10 Frequency Sweep . Sweep lequence model: single, continuous Sweep function modes: Multl-lnterval: Up to 50 different intervals can be sequencedand repeated in a sequencewhich can contain up to 100 intervals. Multi-Marker: ODemarker frequency can be set in eacb intervalor up (09 marker frequenciescan be set if only ODeinterval is used. Sw..p time (settaba. for .ach inlerva'): Linear, 10 DISto 10$.." Log. 100 ms to I~s. Ordering Information HP 3324A SynthesizedFunction/Sweep Generator Opt 001 High Stability Frequency Reference Opt 002 High Voltage Output Opt 003 Automatic PhaseCalibration, slave Opt 004 Automatic PhaseCalibration, master Opt 907 Front Handle Kit (5062-3989) Opt 908RackFlangeKit (5062-3977) Opt 909 Rack FIange and Handle Combination Kit (5062-3983) . Opt WJO Extendcd repair service.Sec page 723.