Transcript
Ceramic
High Pass Filter 50Ω
HFCN-8400D+
9000 to 13000 MHz
Maximum Ratings Operating Temperature
-55oC to 100oC
Storage Temperature
-55 C to 100 C o
RF Power Input*
o
7W max. at 25 C o
Max. DC Voltage at pins 1&3
25 VDC
*Passband rating, derate linearly to 3W at 100°C ambient. Permanent damage may occur if any of these limits are exceeded.
Pin Connections RF IN
1
RF OUT
3
GROUND
2,4,5,6
Features
• Low cost • Small size • 5 sections • Temperature stable • Excellent power handling, 7W • Hermetically sealed • LTCC construction • Protected by US Patent 7,760,485
CASE STYLE: FV1206-1 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications
Applications
and Reel Available Tape cost at no extra Devices/Reel 20, 50, 100, 200, 500,1000, 3000
Reel Size 7”
• Sub-harmonic rejection • Transmitters / receivers
Electrical Specifications1,2 at 25OC
Outline Drawing
STOPBAND (MHz)
VSWR POWER NO. OF Typ. INPUT SECTIONS (W) Frequency (MHz) (Loss > 30dB) (Loss > 20dB) (Loss 3 dB) (Loss < 2.5dB) (Loss < 3dB) 1.5:1 Typ. Min. Typ. Max. Max. Stopband Max.
(ON TOP)
5700 (ON TOP)
fco, MHz Nom.
6000
PASSBAND (MHz)
8400
9500-13000
9000-13000
20:1
9000-13000
7
5
1. DC Resistance to ground is 100 Mohms min. 2. Measured on Mini-Circuits Characterization Test Board TB-285.
electrical schematic
AT T E NUAT ION
typical frequency response PCB Land Pattern
R F IN
40dB
R F OUT
20dB
3dB F co F R E QUE NC Y
F 1.3dB
Typical Performance Data at 25oC Suggested Layout, Tolerance to be within ±.002
Outline Dimensions (inch mm )
A .126 3.20
B .063 1.60
C .035 0.89
D .024 0.61
G .039 0.99
H .024 0.61
J .042 1.07
K .123 3.12
E .022 0.56
F .011 0.28
wt grams .020
Demo Board MCL P/N: TB-285 Suggested PCB Layout (PL-158)
Frequency (MHz)
Insertion Loss (dB)
VSWR (:1)
50 500 4500 5700 6000
55.48 41.57 31.17 36.69 27.78
1737.18 868.59 49.64 31.60 29.46
7500 8020 8400 8600 9000
23.46 9.65 2.88 2.11 1.57
17.05 5.68 1.50 1.15 1.06
9500 10000 12000 13000 16000
1.43 1.47 0.92 1.10 5.43
1.24 1.46 1.22 1.48 4.72
HFCN-8400D+ INSERTION LOSS
HFCN-8400D+ VSWR 10000
50 1000
40
VSWR
INSERTION LOSS(dB)
60
30
100
20 10
10 0
1
0
4000
8000
12000
FREQUENCY (MHz)
16000
0
4000
8000
12000
16000
FREQUENCY (MHz)
Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500
[email protected]
REV. B M151107 EDR-6982/5 HFCN-8400D+ RAV/CP/AM 150724 Page 1 of 1
