High Density Balun Panel

Transcript

The aim of this catalogue is to show the range of high quality baluns and balun solutions available from AC&E. We trust that you will find this booklet helpful in sourcing the products you require. Founded in 1967, Australian company AC&E has become a leading manufacturer and supplier of connectivity and interface solutions to the telecommunications, networking, audio/video and Broadcasting Industries. With sales in 64 countries around the world, AC&E catalogue and customized solutions are well recognized. Since its inception, AC&E has specialised in the development and manufacture of products such as: x Telecommunication Baluns for 1.5 to 155Mbit/s applications x Video Baluns for Surveillance, Security and Broadcast applications x Broadband Baluns for TV and CATV applications x Coaxial Connectors and U Links primarily in BNC, 1.6/5.6, BT43 and 1.0/2.3 x Audio Video Interconnection and Distribution Products x Patch Panels x Cable Assemblies x Alarm Modules, and Power Distribution Modules for Telecommunications Applications x Cable TV Products for interface and distribution x Broadband Interface and Distribution systems for home, apartment or office AC&E is constantly researching, developing and improving its range of telecommunication products to provide customers world wide with cutting edge technology. In the past year we have significantly improved or created new catalogue products providing improved performance and greater product choice. AC&E is committed to supplying high quality, high reliability product at competitive prices. We work in accordance with quality standard ISO9001:2000 and strive for excellence through total quality management methodology. Please feel welcome to visit our web site, www.acande.com or contact our office (address details on the back cover) with any enquiries you may have. We look forward to assisting you with your requirements and providing a solution to your connectivity and interface needs. Page 2 www.acande.com Table of Contents Baluns 4 Introduction Telecommunications Applications Benefits in Converting DDF from Coax to Twisted Pair Generic Single Balun Part Numbering Generic Balun Panel Part Numbering Electrical Characteristics of 2-8Mbits/s, 75/120 Ω Balun Electrical characteristics of 34-155Mbits/s 75/120 Ω Balun 4 5 5 6 7 8 9 Standard Baluns 10 Standard Baluns Physical Characteristics 2-8 Mbits/s 75/120 Ω Transmission Baluns 2,8 & 34 Mbits/s 75/120 Ω Transmission Baluns Standard Baluns Termination Procedure 10 10 11 12 Mini Baluns 13 2-8 Mbits/s 75/120 Ω Transmission Baluns 2,8 & 34 Mbits/s 75/120 Ω Transmission Baluns 34-155Mbits/s high speed Mini Balun Mini Balun Termination Procedures 13 14 14 15 Dual Baluns 16 2-8 Mbits/s 75/120 Ω Transmission Baluns 34-155Mbits/s high speed Mini Balun Dual Balun Cables 16 16 17 Balun Panels 18 Ultra High Density Balun Panels High density balun Panels Medium Density Balun Panels Telco Connector Balun Panels Low Density Balun Panels 18 19 19 20 20 Patch Panels 21 Patch Panel Solutions Blank Panels BNC Panels & Accessories 1.6/5.6 Panels & Accessories Customised Requirements 21 21 21 21 21 Customised Balun Assemblies 22 Quad Balun Assemblies Connector, Integral Balun Pair (ISDN Baluns) DB9 to Coaxial Baluns 16 x E1 Transmission Path Interface Module 22 22 23 23 Balun Cables DDF Solutions Video Baluns Broadband Distribution Systems Notes Glossary 24 25 26 27 28 31 www.acande.com page 3 Baluns - Introduction An unmatched source and load in a transmission system causes poor energy transfer from one part of the system to the next. Baluns are the ideal solution to this problem as they allow two systems of different characteristic impedance to each see their ideal load and source impedance. This avoids losses caused by mismatch and allows full coupling of the transmitted energy from one part of the system to the next. A common transmission impedance matching problem is interfacing systems with a 75: impedance (typical of many coaxial cables) to systems with a 120: impedance (as in many twisted pair cables). There are many other impedances used in transmission systems. Many modern transmission systems are designed with twisted pair interfaces as they offer higher density interfaces, smaller cable sizes and lower cable costs. The incompatibility with older established 75: systems is overcome with Baluns allowing equipment with different interfaces to co-exist without penalty. AC&E is a company that specializes in connectivity and interface solutions. We design and produce a wide range of Baluns that support transmissions from DC to 1GHz in a variety of connectivity standards and physical configurations that are intended for many different applications. In addition AC&E manufacture baluns in six main housing styles with a wide variety of coaxial and twisted pair interfaces. Coaxial connector types supported include BNC, 1.6/5.6, BT43, 1.0/2.3, APT1000, SMB, PAL, F and BPO10 connectors in male (m), female (f) and a variety attachment styles. Twisted pair terminations include Krone IDC, AC&E’s clamp IDC, Screw Terminal, Wire Wrap, Pin Header, Telco, D Connectors and RJ45’s. Reliable long life connections with impedance matching is our business. Our connectivity and interface solution guarantees your signal integrity. This document lists the range of AC&E’s catalogue Balun products and is intended as a selection guide. Its contents are subject to change without notice. Our design team is well experienced in quickly producing products to solve a special connectivity and interface problem. Balun Housing The most common housings for AC&E’s Catalogue Balun products are:x The Standard Balun which is intended for panel mounting and comes with a variety coaxial interfaces and has an industry standard Krone IDC for twisted pair connection. This product is used to house Baluns for use in the 0 – 50Mhz signal range. x The Mini Balun, a fully shielded product which is intended for either panel or cable mounting, comes with a variety coaxial interfaces and AC&E’s Clamp IDC for twisted pair termination. This product houses Baluns for use in the 0 – 250Mhz signal range. x The PCB Balun which is intended for use by equipment makers who need a PCB mounting 75: coaxial interface on their system. The benefit of this solution is that it incorporates impedance transformation and isolation within the same connector footprint. x The Broadband Balun is a product whose packaging is optimized for use in impedance matching 50 – 1,000MHz signals for CATV networks. B13603010 B04002060 Page 4 www.acande.com x x Dual Baluns. These products provide transformation of a 75: coaxial Tx/Rx pair to two 120: twisted pair outputs on a single RJ45 socket. The product is primarily aimed at interfacing T1/E1 to T3/E3 transmissions. M1300921R2 Balun Panels. These products house multiple Standard or Mini Baluns for users who require a high density of Baluns. The convenience and cost saving of a 19” or similar instrument rack in large and professional systems makes these products a popular choice. Telecommunications Applications AC&E’s range of Baluns for telecommunications supports data speeds up to 155Mbit/s and meets or exceeds all the parameters of the ITU–G.703 specifications. These Baluns comprise of three Catalogue types:x x 2–8Mbit/s speed version (for E1/T1 and E2/T2 data streams) 2–8–34Mbit/s speed version (for E1/T1 to E3 data streams) x 34 to 155Mbit/s, high speed version (for E3 and higher data streams) Conversion from coax to twisted pair cables enables the use of high density IDC (insulation displacement connection) modules to be used for distribution frames, increasing the wiring density by more than 5 times, effectively reducing the space requirement to 1/5 or less. This creates space within the exchange for the installation of additional lines and facilities. Australia’s major telecommunication carrier has accomplished the conversion of all their 2 and 8Mbit/s Digital Distribution Frames (DDF) from coaxial to twisted pair cabling using Baluns supplied by AC&E. This has achieved substantial multi-million dollar savings. It is our understanding that this carrier wishes to convert all their coaxial system within their exchanges to run on twisted pair cables for data rates covering 34, 45, 140 and 155Mbit/s, and AC&E is providing the necessary components for them to do so. AC&E is well acquainted with the technology to help any other telecommunications organisation considering the advantages of such an exercise. The maximum distances for twisted pair cables used in conjunction with the Baluns will depend on the grade of cables being used and the number of twists per unit length. Typical distances on good quality cables will be 300 metres and 160 metres respectively for 2Mbit/s and 8Mbit/s using the existing Baluns and 60 metres for 155Mbit/s with the new high speed Baluns. Benefits in Converting DDF from Coax to Twisted Pair 1. The space occupied by the DDF is reduced to one fifth, or less 2. Enables expansion without new buildings, ducting or additional space. 3. Use of smaller, low cost twisted pair cables enables easier cable routing and management. 4. Quick and easy termination of twisted pair wires saves material and labour cost. 5. High reliability of gas tight IDC contacts. 6. Full solution for migrating from old technology to new 120: structure. www.acande.com page 5 Generic Single Balun Part Numbering AC&E single Baluns identified in this catalogue conform to the part numbering standard identified on this page. Part numbers not defined generally are customer specific types. This table is useful for quickly selecting products but please request a data sheet to check all specifications and user data before purchasing products. Balun Type - Bxx B00 B13 B04 B08 Video DC to 8MHz, 75/120Ohm 2, 8Mbit/s, 75/120Ohm 2, 8, 34Mbit/s, 75/120Ohm High Speed 34 to 155Mbit/s, 75/120Ohm Coaxial Connector - yyy 1.6/5.6 (m) Snap Coupling 1.6/5.6 (m) Screw Coupling 1.6/5.6 (f) BNC (m) 75Ohm BNC (f) 75Ohm BNC (f) 75Ohm Bulkhead 1.6/5.6 (m) Rt Angle Snap BNC (m) 75Ohm Rt Angle APT 1000 (m) Fixed Mtg with Locking Bush 1.0/2.3 (m) Straight Posi-Lock 75Ohm 1.0/2.3 (f) Bulkhead 75Ohm Type 43 (f) In-line Posi-Lock Type 43 (m) In-line Fixed Chassis Mtg Type 43 (m) In-line Floating Chassis Mtg Type 43 (m) HDC Floating Chassis Mtg SMB (f) In-line SMB (f) Rt Angle 001 002 003 008 009 019 025 028 041 043 044 046 048 049 052 078 085 Coax yyy Balun Bxx IDC zzz Generic Balun p/n Bxx yyy zzz Twisted Pair Connection - zzz 3 pole IDC (Krone), 0.4 to 0.65mm Clam IDC for 0.5 to 0.65mm STP or UTP wire Clamp IDC for 0.24 to 0.40mm STP or UTP wire Clamp IDC for 0.5 to 0.65mm STP or UTP wire HDC Clamp IDC for 0.24 to 0.40mm STP or UTP wire HDC eg. B04 003 060 B13 019 010 B08 044 065 Balun Balun Balun 010 060 065 070 075 2,8,34Mbit/s, 1.6/5.6 (f), Clamp IDC 0.5 to 0.65 wire 2,8Mbit/s, BNC (f) 75Ohm Bulkhead, 3 pole IDC (Krone) 34 to 155Mbit/s, 1.0/2.3 (f) Bulkhead, Clamp IDC 0.3 to 0.4 wire B04 003 060 B13 019 010 Page 6 B08 044 065 www.acande.com Generic Balun Panel Part Numbering Balun Type - Mxx Video DC to 8MHz, 75/120Ohm 2-8Mbit/s, 75/120Ohm 2-8-34Mbit/s, 75/120Ohm B00 B13 B04 Generic Balun Panel p/n Mxx yyy zz pp Coaxial Connector Type - yyy 1.6/5.6 (f) BNC (f) Type 43 (m) In-line 1.0/2.3 (f) Bulkhead SMB (m) In-line 003 009 049 044 083 Panel Matrix - zz 96 Coax and Baluns to 48 Twisted Pair Connectors 48 Coax and Baluns to 24 Twisted Pair Connectors 32 Coax and Baluns to 16 Twisted Pair Connectors 32 Coax and Baluns to 2 Twisted Pair Connectors 16 Coax and Baluns to 8 Twisted Pair Connectors 2 Coax and Baluns to 1 Twisted Pair Connector 98 44 36 32 18 21 Configuration - pp RJ45, 1 RU, 19” Rack Black, wired 1245, 2 sided RJ45, 2 RU, 19” Rack, Black, wired 1245, all connectors one side Telco connector, 2RU 19” Rack Black, fixed wiring, 2 sided eg. M13 003 36 R6 www.acande.com M13 003 36 R6 R1 R6 T1 Balun Panel 2-8Mbit/s, 75/120Ohm, 1.6/5.6 (f) Coaxial Connectors 32 Coaxial Connectors and Baluns to 16 twisted pair connectors RJ45, 2 RU, 19” Rack, black, wired 1245, all connectors one side page 7 Electrical Characteristics of 2-8Mbit/s, 75/120: Balun This AC&E Telecommunication Balun is intended for 2-8Mbit/s data transmissions and features the following performance characteristics:x Exceeds ITU.G.703 performance requirements x Insertion Loss: < 0.2dB (2Mbit/s); <0.3dB (8Mbit/s) x Return Loss: -29dB(typ), 2Mbit/s -21dB(typ), 8Mbit/s x Isolation > 250V x Working temp –30 to +75qC x In Mini, PCB and Standard Balun housing ‘B13’ 2Mbit/s pulse performance and G.703 pulse spec mask x In Balun Panel housing ‘M13’ x Optimized for E1 and T1 communications x Other impedances and enclosures on request Typical return loss and G.703 minimum performance levels for 2 and 8Mbit/s transmissions. The return loss margin provides performance reserve against crushed cables, over bent cables, and other system imperfections. Electrical Characteristics of 2-8-34Mbit/s, 75/120: Balun This AC&E Telecommunication Balun is intended for 2-8-34Mbit/s, 75/120: transmissions and features the following performance characteristics:x Exceeds ITU-G.703 performance requirements x Insertion Loss: < 0.3dB (8Mbit/s) x Return Loss: Conforms to ITU.G.703 x Isolation > 250V x Working temp –20 to +75qC x In Mini, PCB and Standard Balun housing ‘B04’ 8Mbit/s pulse performance and G.703 pulse spec mask x In Balun Panel housing type ‘M04’ x Designed for E1, E2 and E3 Communications x Other impedances and enclosures on request Page 8 www.acande.com 34Mbit/s pulse performance and G.703 pulse spec mask Typical return loss and G.703 minimum performance levels for 2, 8 and 34Mbit/s Electrical Characteristics of 34 - 155Mbit/s, 75/120: Balun The AC&E Telecommunication High Speed Balun is intended for 34 to 155Mbit/s, 75/120: transmissions. It features the following performance characteristics:x Exceeds ITU-G.703 performance requirements x Insertion Loss 860KHz to 52MHz < 0.8dB 50KHz to 240MHz < 1.5dB x Return Loss 1MHz to 240MHz < -15dB x Isolation > 250V x Working temp –30 to +75qC x In Mini Balun housing type ‘B08’ 140Mbit/s pulse performance and G.703 pulse spec mask x Designed for E3/T3 to 155Mbit/s data streams x Other impedances and housing on request Typical return loss and ITU-G.703 minimum performance levels for 34 and 155Mbit/s transmissions. www.acande.com page 9 Standard Baluns Physical Characteristics x Intended for panel mounting and can be supplied with a variety of Coaxial Connectors BNC, 1.6/5.6, Type43, BPO10 etc x Twisted pair termination via 3 pole Krone IDC x Available in two speed ranges 2-8Mbit/s and 2-8-34Mbit/s x The coaxial side is designed for DDF (1.6/5.6 connectors or similar) installation and for equipment connection (cable integral) with either male or female connectors x The mechanical endurance of the coaxial connectors is designed to give in excess of 500 connect/disconnect cycles. x On the balanced side, the 120: interface connector is designed to accept termination of single and multi-strand conductors with nominal diameters from 0.4mm to 0.65mm. x The force required to terminate the IDC is designed to remain fully operative and intact after 50 connect/reconnect cycles for Krone IDC Terminals x Simple cable anchorage is achievable by passing the cable through the hollow section under terminal markings. x B04025010 3 B13019010 B04001010 B13008010 The diagram shows the circuit symbols of the Balun with its coaxial and twisted pair connectors and the polarisation of the transformer. The Standard Balun has an earth connection taken from the outer coaxial contact to the twisted pair side and labeled ’E‘. It is optional to connect the shielding to this earth connection. B13 019 010 Drawing 2 and 8Mbit/s 75/120: Transmission Baluns (Identify by black coloured outer body insulation ring) Electrical Characteristics and Performance x Performance exceeds ITU.G.703 x The value of impedance match is 75 r 3: resistive to 120 r 4: resistive, when measured from 51 to 12,672kHz with the unused end terminated into the respective resistive load. x The insertion loss from both sides is < 0.2dB for 2Mbit/s and < 0.3dB for 8Mbit service. x Cross talk between any two baluns mounted on a DDF strip with 15mm centres is better than -80dB in the frequency range of 0.1MHz to 12MHz. x Return loss is – 29dB(typ) for 2Mbit/s and –21dB(typ) for 8Mbit/s service x Transmission losses for cable are excluded. Page 10 www.acande.com Black Balun Order Codes Part No Description B04 001 010/N 1.6/5.6 (m) snap to 3 pole Krone IDC B13 002 010 1.6/5.6 (m) screw to 3 pole Krone IDC B13 003 010 1.6/5.6 (f) to 3 pole Krone IDC B04 025 010/N 1.6/5.6 (m) Rt. angle snap to 3 pole Krone IDC B13 008 010 BNC (m) to 3 pole Krone IDC B04 009 010 BNC (f) to 3 pole Krone IDC B04 028 010 BNC (m) Rt. angle to 3 pole Krone IDC B13 019 010 BNC (f) bulkhead to 3 pole Krone IDC Customer Specified Black Baluns Part No Specifier Description 353/330 Telstra 1.6/5.6 (m) snap to 3 pole Krone IDC 353/644 Telstra 1.6/5.6 (m) screw to 3 pole Krone IDC 353/329 Telstra 1.6/5.6 (f) to 3 pole Krone IDC 353/518 Telstra 1.6/5.6 (m) Rt. angle snap to 3 pole Krone IDC 353/693 Telstra BNC (m) to 3 pole Krone IDC 353/610 Telstra BNC (m) Rt. angle to 3 pole Krone IDC 2, 8 and 34Mbit/s 75/120: Transmission Baluns Identifiable by its outer body insulating ring which is coloured white. Electrical characteristics and performance x The value of the impedance match is 75 ± 10: resistive to 120 ± 12: resistive, when measured at 1 to 17MHz and with the unused end terminated into the respective resistive load. x The insertion loss less than 0.9dB is in the range 0.2MHz to 70MHz from both sides. x Cross talk between any two baluns mounted on a DDF strip is better than -60dB with vertical orientation of IDC connectors in the range of 1MHz to 70MHz x Return loss is better than -15dB in the frequency range of 1MHz to 70MHz in both directions of transmission conforming to ITU-G.703. x Transmission losses for cable are excluded 2-8-34Mbit/s Standard Balun Order Codes Part No Description B04 001 010/L 1.6/5.6 (m) snap to 3 pole Krone IDC B04 002 010/L 1.6/5.6 (m) screw to 3 pole Krone IDC B04 003 010/L 1.6/5.6 (f) to 3 pole Krone IDC B04 025 010/L 1.6/5.6 (m) Rt. angle snap to 3 pole Krone IDC B04 008 010/L BNC (m) to 3 pole Krone IDC B04 009 010/L BNC (f) In-line to 3 pole Krone IDC B04 028 010/L BNC (m) Rt. angle to 3 pole Krone IDC B04 019 010/L BNC (f) bulkhead to 3 pole Krone IDC Customer Codes for 2-8-34Mbit/s Baluns Part No Specifier Description 353/867 Telstra 1.6/5.6 (m) snap to 3 pole Krone IDC 353/875 Telstra 1.6/5.6 (m) screw to 3 pole Krone IDC 353/566 Telstra 1.6/5.6 (f) to 3 pole Krone IDC 353/873 Telstra 1.6/5.6 (m) Rt. angle snap to 3 pole Krone IDC 353/876 Telstra BNC (m) to 3 pole Krone IDC 353/874 Telstra BNC (m) Rt. angle to 3 pole Krone IDC www.acande.com page 11 Standard Balun Termination Procedure 1. Mount the balun to the panel (if applicable). 2. Strip the cable sheath to expose the individual twisted pairs (if applicable) 3. Pass the desired twisted pair through the cable restraint hole in the moulding entering at ’A‘ 4. Loop the wires back over and into the appropriate slot in the IDC connector. 5. The IDC marked ’A‘ corresponds with the centre contact in the coax connector, ’B‘ corresponds to the outer contact and ‘E’ earth. 6. Terminate the IDC using a Krone terminating tool. 7. Dress the cables as shown in the diagram below, allowing a loop of about 25mm at the cable entry in case the wires need to be re-terminated. APPROX. 25mm TWISTED PAIR ENTERS THE HOLE AT THE END OF THE CABLE RESTRAINT AND LOOPS BACK OVER THE BLOCK INTO THE IDC MULTI PAIR CABLE Typical 1DME application of Balun replacing coaxial connectors Part No. KR6089-2-003-00 TJ1 Description IDC Connection tool Standard Balun Termination Jig (for termination of unmounted 1.6/5.6 only) TJ1 Page 12 www.acande.com Mini Balun Series Mini Baluns are ideal in applications where size and space are restricted due to their small dimensions. They are intended for panel or cable mounting and feature AC&E’s clamp IDC termination allowing installation without special tools. They are fully shielded and offer EMC compatibility and EMI compliance as well as excellent high data rate performance. They are available in three speed ranges, 2-8Mbit/s, 2-8-34Mbit/s or 34 to 155Mbit/s. B04044060 The Mini Balun is the subject of a number of patent applications. Mini Baluns offer the following performance features:x Fully shielded x Three speed ranges, 2-8Mbit/s, 2-8-34Mbit/s or 34 to 155Mbit/s. x Electrical Characteristics on pages 8 and 9 x EMC and RFI Compliant x x x Contacts Plated min. 1.25µm Ni + min. 1.25µm Au Coax Connectors with BeCu spring contacts and Teflon Insulators Coaxial Connector Insertion cycles > 500 x x x x IDC Contacts Phosphor Bronze IDC Insertion Cycles > 20 IDC to suit 0.24 to 0.40mm Cu wire (p/n ends ‘5’) AWG 22-24 IDC to suit 0.50 to 0.65mm Cu wire (p/n ends ‘0’)AWG 26-28 x x Body Parts Plated Min. 5µm Ni Cable anchorage via channeled stress-relief around stuffer cap B13 019 060 B04003060 B04046060 B04 003 060 Mini Balun 2-8Mbit/s, 75/120: Balun (Identify by black coloured IDC former) Order Codes Part Number B13 001 060 B13 002 060 B13 003 060 B13 008 060 B13 019 060 B13 043 060 B13 044 060 B13 046 060 B13 048 060 B13 049 060 B13 052 070 B13 078 060 B13 085 060 Description 1.6/5.6 (m) Straight Snap Coupling 1.6/5.6 (m) Straight Screw Coupling 1.6/5.6 (f) Straight Bulkhead BNC (m) Straight BNC (f) Straight Bulkhead 1.0/2.3 (m) Straight Posi-lock Coupling 1.0/2.3 (f) Straight Bulkhead Type 43 (f) Straight Posi-lock Coupling Type 43 (m) Straight Bulkhead Fixed Mounting Type 43 (m) Straight Bulkhead Floating Mounting Type 43 HDC (m) Straight Floating Mounting SMB (f) In-line Coupling SMB (f) Rt. Angle Coupling (0.50 to 0.65mm wire types listed, for 0.24 to 0.40 wire p/n last digit ‘0’ becomes ‘5’) www.acande.com page 13 Customer Codes for 2-8Mbit/s Mini Baluns Part No NTUM98LA NTQG41GA NTUM 98YA 67356-10/196 5105189-0013 5105191-0019 CS73426.08 CS73426.09 Specifier Nortel Nortel Nortel Marconi Marconi Marconi Nokia Nokia Description Mini Balun Pair, 1.6/5.6 (m) Straight Screw Coupling Mini Balun Pair , BNC (m) Straight Mini Balun Pair, Type 43 (m) Str Bulkhead Floating Mounting Mini Balun, 1.0/2.3 (m) Straight Posi-Lock Coupling Type 43 (m) Straight Bulkhead Floating Mounting Type 43 HDC (m) Str Bulkhead Floating Mounting 1.0/2.3 (f) Straight Bulkhead BNC (M) Straight Mini Balun 2-8-34Mbit/s, 75/120 Balun (Identify by fawn coloured IDC former) Order Codes Part Number B04 001 065 B04 002 065 B04 003 065 B04 008 065 B04 019 065 B04 043 065 B04 044 065 B04 046 065 B04 048 065 B04 049 065 B04 052 075 Description 1.6/5.6 (m) Straight Snap Coupling 1.6/5.6 (m) Straight Screw Coupling 1.6/5.6 (f) Straight Bulkhead BNC (m) Straight BNC (f) Straight Bulkhead 1.0/2.3 (m) Straight Posi-lock Coupling 1.0/2.3 (f) Straight Bulkhead 43 (f) (f) Straight Straight Posi-lock Posi-lock Coupling Coupling Type 43 Type Type 43 (m) Straight Bulkhead Fixed Mounting Type 43 (m) Straight Bulkhead Floating Mounting 43 HDC HDC (m) (m) Str Str Bulkhead Bulkhead Floating Floating Mounting Mounting Type 43 Type (0.24 to 0.40mm wire types listed, for 0.50 to 0.60 0.65 wire p/n last digit ë5í '5' becomes becomes'0') ë0í) (0.32 Customer Codes Part No 848 341 756 848 341 722 848 341 780 848 341 798 848 341 673 848 341 806 848 341 814 848 341 822 848 341 830 848 536 793 848 746 558 848 746 566 Specifier Lucent Lucent Lucent Lucent Lucent Lucent Lucent Lucent Lucent Lucent Lucent Lucent Description 1.6/5.6 (m) Straight Screw Coupling 1.6/5.6 (f) Straight Bulkhead BNC (m) Straight BNC (f) Straight Bulkhead Mounting APT 1000 (m) StrBulkhead Fixed Mtg with Locking Bush 1.0/2.3 (m) Straight Posi-lock Coupling 1.0/2.3 (f) Straight Bulkhead Type 43 (f) Straight Posi-lock Coupling Type 43 (m) Straight Bulkhead Fixed Mounting 1.6/5.6 (f) Monitored Balun U Link 20dB Type 43 (m) Straight Bulkhead Floating Mounting Type 43 HDC (m) Straight Bulkhead Floating Mount High Speed Mini Balun 34 to 155Mbit/s, 75/120 Balun (Identify by knurled body) Order Codes Part No. B08 002 065 B08 003 065 B08 008 065 B08 019 065 B08 043 065 B08 044 065 B08 046 065 B08 052 075 Description 1.6/5.6 (m) Straight Screw Coupling 1.6/5.6 (f) Straight Bulkhead BNC (m) Straight BNC (f) Straight Bulkhead 1.0/2.3 (m) Straight Posi-lock Coupling 1.0/2.3 (f) Straight Bulkhead Type 43 (f) Straight Posi-lock Coupling Type 43 (m) HDC Straight Floating Mounting B08044065 (0.24 to 0.40mm wire types listed, for 0.50 to 0.60 0.65 wire p/n last digit ë5í '5' becomes (0.32 becomes'0') ë0í) Page 14 www.acande.com Mini-Balun Termination Procedure Cable examples - 060 IDC 26-28AWG Filotex ET2PBB010 (8 pair or similar) or Lucent Technologies 848 317 673. - 065 IDC 22-24AWG Belden JPMD06AAH0011 1. Dis-assemble the rear end components from the mini-balun. 2. Fit the nut and outer cover onto the cable in that order. 3. Strip the cable jacket to ‘B’ from the end of the cable. Cut the drain wire and foil ‘A’ from the end of the cable. 4. Flare the foil and fold it and the drain wire back over the sheath. Fit the grounding ring over the end of the cable. 5. Insert the wires into the holes in the small end of the stuffer cap marked ’A‘ and ’B‘. 6. The ’A‘ connection corresponds with the polarity of the centre conductor of the coax. Push the stuffer cap hard against the washer. Spread the conductors apart towards the sides of the stuffer cap and fit the conductor ends into the slot in each side of the stuffer cap. 7. Ensure that the end of each conductor is positioned behind the lip and into the cavity at the end of the slot, as per illustration. 8. Fold the foil and the drain wire back over the outside of the stuffer cap. Ensure the drain wire ends within the tapered section of stuffer cap. 9. Orient the tongue on the mini-balun to line up with the flat on the stuffer cap and insert the stuffer cap onto the IDC terminals. Ensure that the wires are correctly positioned in the slots (Refer to 7 above). 10. Pull the rear outer body forward and align the flat to the tongue in the Mini-Balun body. Secure the retaining nut finger tight. Lightly tighten using the spanners recommended. www.acande.com page 15 B A Dual Balun This module contains 2 Coaxial Connectors, 2 Baluns and 1 RJ45 socket housed in an insulated enclosure. It is intended to convert an E1/T1 Channel consisting of 1 Transmit and 1 Receive signal from 75Ω coaxial to 2 x 120Ω twisted pair signals on an RJ45/Cat5 cable. This module features:Fully shielded Circuitry Complies with EMC requirements. Insertion loss: < 0.4dB Return Loss: < -25dB Interfaces two coaxial "E1", 2Mbit/s paths into an RJ45 socket Specified for 2-8Mbit/s use Other connectors available on request, e.g. SMB M1300921R2 3 Provides 250V isolation from input to output terminals Insulated enclosures (BNC 37x37x28mm, Others 31x57x61mm) Matching impedances 75 to 120 . Others on request. 2-8-34Mbit/s versions available on request Order Codes Dual Balun, 2x BNC (f) to RJ45, 2 to 8Mbit/s, 75/120 Ω Dual Balun, 2x 1.6/5.6 (f) to RJ45, 2 to 8Mbit/s, 75/120 Ω Dual Balun, 2x BT43 (m) to RJ45, 2 to 8Mbit/s, 75/120 Ω Dual Balun, 2x 1.0/2.3 (f) to RJ45, 2 to 8Mbit/s, 75/120 Ω M1300921R2 M1300321R2 M1304921R2 M1304421R2 Customer Order Codes 408 808 715 A0864597 Lucent Nortel Dual Balun, 2x BNC (f) to RJ45, 2 to 8Mbit/s, 75/120 Ω Dual Balun, 2x BNC (f) to RJ45, 2 to 8Mbit/s, 75/120 Ω High Speed Dual Balun 34 to 155Mbit/s This module offers two STM1 155Mbit/s paths (also 140Mbit/s, 45Mbit/s or 34Mbit/s) into a single RJ45 socket from coaxial feeders. The module contains 2 Coaxial Connectors, 2 Baluns and 1 RJ45 socket housed in an insulated enclosure. The Dual Balun module features:Fully shielded Circuitry Insertion loss: < 0.8dB Return Loss: < -15dB from 1MHz to 240MHz and B08040071 < -18dB from 8.4MHz to 12.6MHz Cross Talk: < -80dB from 51KHz to 3.072MHz Pulse Shape: Meets ITU G.703 Mask at 34 and 155Mbit/s ESD Immunity Tests: Passed EN 61000-4-2 EMC: Complies with Class B limits of EN 55022 with STP Cable Provides 1kV isolation from input to output terminals. Stable over the working temperature of -30ºC to 55ºC Housed in insulated wall mountable enclosures (31x57x61mm). Matching impedances 75 to 120Ω . Others on request. Earthing is available in a number of combinations to suit most applications. As standard, a capacitor is arranged to connect the grounding of the co-axial to twisted pair and a zero ohm resistor ties the grounding of both coaxial connectors. Page 16 www.acande.com PCB Baluns Order Codes No Baluns are available Description A selection ofPart AC&E housed in PCB mounting B08 040 072 Dual Balun, 2x BNC (f) to RJ45, 34 to 155Mbit/s, 75/120Ω right angle coaxial connectors. B08 040 071 Dual Balun, 2x 1.6/5.6 (f) to RJ45, 34 to 155Mbit/s, 75/120Ω These products are intended for use by transmission equipment B08 040 073 Dual Balun, 2x BT43 (m) to RJ45, 34 to 155Mbit/s, 75/120Ω designers who wish to take advantage of the space savings that an B08 040 080 Dual Balun, 2x 1.0/2.3 (f) to RJ45, 34 to 155Mbit/s, 75/120Ω integrated Connector/Balun provides. Available in BNC, 1.6/5.6 and BT43 these PCB Baluns feature a windingBalun isolationCables of 250V and are available with a 2-8Mbit/s, Dual Transmission Balun core. Other coaxial connectors and AC&E's DualonBalun Cables provide the ideal impedances request. connectivity and interface solution where space is at a premium as they provide a solution with or without a patch panel. Factory assembled Mini Balun PCB CableBaluns assemblies supplied to The AC&E offer theare following performance features:length as requested. x Fully shielded x Balun Available in BNC, 1.6/5.6 and BT43 coaxial connectors Dual Cables Feature: x Common PCB footprint Compact panel less interface solution x DetaiIed electrical characteristics on pages 8 and 9 Fully shielded interconnect x 2-8Mbit/s Transmission Balun Exceeds G.703 specified performance x 75/120: transformation All Miniimpedance Baluns supported Supplied withrugged cable boots for additional strain relief x Small size and construction Catalogue types available from stock x Other Coaxial Connectors and impedances on request Cables labeled TX & RX x 2-8-34Mbit/s Transmission or Video Balun core on request Order Code (xx=length in metres) Part Number S440/xxM S539/xxM S441/xxM S540/xxM Order Codes Part No S442/xxM B13 076 035 S541/xxM B13 045 035 S542/xxM B13 055 035 S543/xxM S554/xxM S557/xxM www.acande.com Description 1.6/5.6 (f) x 2 to RJ45 (m) shielded on STP 1.6/5.6 (m) screw x 2 to RJ45 (m) shielded on STP 1.0/2.3 (f) x 2 to RJ45 (m) shielded on STP 1.0/2.3 (m) x 2 to RJ45 (m) shielded on STP BNC (f) Description x 2 to RJ45 (m) shielded on STP PCB Balun, (f), 2-8Mbit/s, 75/120: BNC (m) x 2 to RJ45BNC (m) shielded on STP PCB Balun, 1.6/5.6 (f), 2-8Mbit/s, T43 (f) Posi lock x 2 to RJ45 (m) shielded 75/120: on STP BT43to(m), 2-8Mbit/s, 75/120: T43 (m)PCB FixedBalun, mounting RJ45 (m) shielded on STP BT43 (m) x 2 to RJ45 (m) shielded on STP BT43 (m) HDC x 2 to RJ45 (m) shielded on STP page 17 Dual BalunBalun Panels This module contains 2 Coaxial Connectors, Baluns and 1 RJ45 AC&E's range of Balun panels are intended 2for socket housed in an insulated enclosure. It is intended to convert an converting 75Ω coaxial transmissions to 120Ω balanced twisted pair signals. They are based on E1/T1 Channel consisting of 1 Transmit and 1 Receive signal from AC&E's Mini 75: coaxial to 2Balun x 120:technology twisted pairwhich signalsisonthe an RJ45/Cat5 cable. subject of a number of patent applications. A common application is when new equipment This module features:designed with twisted pair interfaces needs to be B04040072 connected to an established x Fully shielded Circuitry coaxial environment. AC&E's Balun Panels achieve such an interface x Complies with EMC requirements. with a minimum of electrical degradation and x Insertion loss: for < 0.4dB exceed ITU-G703 2-8Mbit/s transmissions (28-34Mbit/s types available x Return Loss: < -25dB on request). Together with matching Patch Panels, Patch x Interfaces two coaxial ‘E1’, 2Mbit/s paths into an RJ45 socket Cables, U Links and Connectors AC&E offer a x Specified for 2-8Mbit/s Complete Connectivity and use Interface Solution. x Other connectors available on request, e.g. SMB The Provides extensive250V range of panels is available x isolation from input to outputonterminals 19" Rack Mounted Balun Panels short leadtime and features:x Insulated enclosures (BNC 37x37x28mm, Others 31x57x61mm) x x Matching impedances to 120:. request. limit packing density Up to 96 baluns in 1RU75 panel heightOthers offers on mechanical versions on request 52-8-34Mbit/s density varients and available 6 configurations available from stock range Stocked types include BNC, 1.6/5.6, BT43, SMB and 1.0/2.3 coaxial connectors (others on request) Order Codes Electrical Characteristics on page 8 B04 040 072 Dual Balun, 2x BNC (f) to RJ45, 2-8Mbit/s, 75/120: B04 040 071 Dual Balun, 2x 1.6/5.6 (f) to RJ45, 2-8Mbit/s, 75/120: Internal shielding adacent channel < -80dB B04 040 073gives low Dual Balun, 2x BT43cross (m) totalk RJ45, 2-8Mbit/s, 75/120: Ultra thin design (96 balun 45mm, leaves more 75/120: room for cable entry B04panel 040 080 Dual Balun, 2x others 1.0/2.3 33mm) (f) to RJ45, 2-8Mbit/s, Shielded construction gives excellent EMC performance Reversable panel allows coaxial or RJ45 side to be mounted to the front Adjustable panel recess gives more cable entry space where required High Speed Dual Balun 34 to 155Mbit/s Zinc sealed, powder coated steel for rigidity and long life Mounting brackets may be substituted to support other standards This module offers two STM1 155Mbit/s paths (also Matching Patch Panels and Blank Panels for a Complete Connectivity and Interface 140Mbit/s, 45Mbit/s or 34Mbit/s) into a single RJ45 Solution socket from coaxial feeders. The module contains 2 Coaxial Connectors, 2 Baluns and 1 RJ45 socket UltrainHigh Density housed an insulated enclosure.Balun Panel 96 Coax to 48 RJ45, 1RU, 75/120Ω The Dual Balun module features:x x x Fully shielded Circuitry Insertion loss: < 0.8dB Return Loss: < -15dB from 1MHz to 240MHz and B08040071 < -18dB from 8.4MHz to 12.6MHz x Cross Talk: < -80dB from 51KHz to 3.072MHz x Pulse Shape: Meets ITU G.703 Mask at 34 and 155Mbit/s x ESD Immunity Tests: Passed EN 61000-4-2 x EMC: Complies with Class B limits of EN 55022 with STP Cable x Provides 1kV isolation from input to output terminals. Order codes x Stable over the working temperature of -30qC to 55qC M13 049 98 R1 BT43 (m)wall to RJ45, 96x48,enclosures 1RU, 75/120Ω , 2-8Mbit/s x Housed in insulated mountable (31x57x61mm). 2-8Mbit/s M13 044 98 R1 1.0/2.3 (f) to RJ45, 96x48, 1RU, 75/120Ω, x Matching impedances 75 to 120:. Others on request. , 2-8Mbit/s RJ45, 96x48, 1RU, 75/120Ω M13 08398 R1 SMB(m) to x Earthing is available in a number of combinations to suit most applications. As standard, a capacitor is arranged to connect the grounding of the co-axial to twisted pair and a zero ohm resistor ties the grounding of both coaxial connectors. Tx Tx Tx Rx Rx Rx Rx Tx Tx Tx Tx Rx Rx Rx Rx Page 18 Tx www.acande.com Order Codes 48 Coax to 24 RJ45, 1RU, 75/120: High Density Balun Panel Part No Description B08 040 072 B08 040 071 B08 040 073 B08 040 080 Dual Balun, 2x BNC (f) to RJ45, 34 to 155Mbit/s, 75/120: Dual Balun, 2x 1.6/5.6 (f) to RJ45, 34 to 155Mbit/s, 75/120: Dual Balun, 2x BT43 (m) to RJ45, 34 to 155Mbit/s, 75/120: Dual Balun, 2x 1.0/2.3 (f) to RJ45, 34 to 155Mbit/s, 75/120: Dual Balun Cables Tx Tx Rx Rx AC&E’s Dual Balun Cables provide the ideal connectivity and interface solution where space Order is at a codes premium as they provide a solution with M13 009 44 aR1patch BNC (f) to RJ45, 48x24, 1RU, 75/120:, 2-8Mbit/s or without panel. Factory assembled M13 003 44 R1 (f) to RJ45, 1RU,to75/120:, 2-8Mbit/s Mini Balun Cable1.6/5.6 assemblies are48x24, supplied length as44 requested. M13 049 R1 BT43 (m) to RJ45, 48x24, 1RU, 75/120:, 2-8Mbit/s M13 044 44 R1 1.0/2.3 (f) to RJ45, 48x24, 1RU, 75/120:, 2-8Mbit/s Dual Balun Cables Feature: S440/5M x Compact panel less interface solution x Fully shielded interconnect Medium Density Balun Panel 32 Coax to 16 RJ45, 1RU, 75/120: x Exceeds G.703 specified performance x All Mini Baluns supported x Supplied with cable boots for additional strain relief x Catalogue types available from stock x Cables labeled TX & RX Order Code (xx=length in metres) Tx Tx Tx Part Number Description S440/xxM 1.6/5.6 (f) x 2 to RJ45 (m) shielded on STP S539/xxM 1.6/5.6 (m) screw x 2 to RJ45 (m) shielded on STP S441/xxM 1.0/2.3 (f) x 2 to RJ45 (m) shielded on STP Order codes x 2 to1RU, RJ4575/120:, (m) shielded on STP M13 009S540/xxM 36 R1 BNC (f) 1.0/2.3 to RJ45,(m) 32x16, 2-8Mbit/s BNC (f) x 232x16, to RJ451RU, (m) shielded STP M13 003S442/xxM 36 R1 1.6/5.6 (f) to RJ45, 75/120:,on 2-8Mbit/s BNC (m) x 32x16, 2 to RJ45 (m)75/120:, shielded 2-8Mbit/s on STP M13 049S541/xxM 36 R1 BT43 (m) to RJ45, 1RU, S542/xxM T43 (f) Posi lock x 2 to RJ45 (m) shielded on STP M13 044 36 R1 1.0/2.3 (f) to RJ45, 32x16, 1RU, 75/120:, 2-8Mbit/s S543/xxM T43 (m) Fixed mounting to RJ45 (m) shielded on STP Rx Rx Rx Single Sided Balun Panel 32 Coax to 16 RJ45, 2RU, 75/120: Order codes M13 009 36 R6 M13 003 36 R6 M13 049 36 R6 M13 044 36 R6 BNC (f) to RJ45, 32x16, 2RU, 75/120:, 2-8Mbit/s 1.6/5.6 (f) to RJ45, 32x16, 2RU, 75/120:, 2-8Mbit/s BT43 (m) to RJ45, 32x16, 2RU, 75/120:, 2-8Mbit/s 1.0/2.3 (f) to RJ45, 32x16, 2RU, 75/120:, 2-8Mbit/s www.acande.com page 19 Tx Rx 32 Coax to 2x50way Telco, 1 RU, 75/120: Broadband Telco Connector Distribution Balun Panel System Home As modern technology is becoming integral with our lives, many people require a multi-function outlet in almost every room in their house. Tx Tx Tx Tx Along with the existing Alarm, Radio, Telephone, analog and ISDN Computer outlets, you can now with the AC&E Broadband Distribution System, also bring TV or Video Order Codesto one or every room in your home. This is achieved byT1usingBNC a (f) balun cable Telco, connected to the 2-8Mbit/s M13 009 32 to 2x50way 1RU, 75/120:, M13 003 32 T1wall 1.6/5.6 (f) each to 2x50way Cat5e or Cat6 outlet in room.Telco, 1RU, 75/120:, 2-8Mbit/s M13 049 (m) to for 2x50way Telco, 1RU, 75/120:, 2-8Mbit/s There is 32 noT1 longerBT43 a need duplication of cables. M13 044 32 T1 1.0/2.3 (f) to 2x50way Telco, 1RU, 75/120:, With the AC&E Broadband Distribution System, you can 2-8Mbit/s now easily change your wall-outlet from a socket for Tele-work to a TV socket. Low Density Balun Panel 16 Coax to 8 RJ45, 1RU, 75/120: Rx Rx Rx Rx Office Why install a costly coaxial TV cable into an existing premises, when many buildings already have many twisted pair cables installed for varying applications? Tx Tx Using the AC&E Broadband Distribution System, TV signals can now be distributed economically over twisted pair cable. Installation of the AC&E Broadband Distribution System is straight forward as the system is Order Codes designed to fit readily into either a standard 10” or 19” M13 009 18 R1 BNC (f) to RJ45, 16x8, 1RU, 75/120:, 2-8Mbit/s equipment racks where many of the twisted pair ends M13 003 18 R1 1.6/5.6 (f) to RJ45, 16x8, 1RU, 75/120:, 2-8Mbit/s are already terminated. Simple RJ45 patch cords are M13 049 18 R1 BT43 (m) to RJ45, 16x8, 1RU, 75/120:, 2-8Mbit/s used to patch two systems together. The75/120:, system2-8Mbit/s M13 044 18 R1 the 1.0/2.3 (f) to RJ45, 16x8, 1RU, can handle up to Channel 69 (European Standard). Additionally AC&E Broadband Balun patch cords are Single Sided Balun Panel Coax tois8 RJ45, single sided, 2RU, 75/120: required when only an unbalanced input16facility available on the TV set (PAL coaxial connector). Rx Rx Order Code Part No Description VDS001 Broadband Distribution System with 4 outlets, 10” panel * VDS002 Broadband Distribution System with 8 outlets, 10” panel * VDS003 Broadband Distribution System with 4 outlets, 19” panel Order Codes VDS004 Broadband Distribution System with 8 outlets, 19” panel M13 009 18 R6 BNC (f) to Broadband RJ45, 1 Side, 2 RU, 75/120:, 2-8Mbit/s VDPC01/2M Balun patch cord, 2m, PAL(m) to RJ45 UTP M13 003 18 R6 1.6/5.6 (f) to RJ45, 1 Side, RU, 75/120:, VDPC02/2M Broadband Balun2 patch cord, 2m2-8Mbit/s PAL (m) to RJ45 STP VDSTERM RJ45 Terminator M13 049 18 R6 BT43 (m) to RJ45, 1 Side, 2 RU, 75/120:, 2-8Mbit/s * 10” panel made according to Krone cabinet sizes. Other 10” sizes on request. M13 044 18 R6 1.0/2.3 (f) to RJ45, 1Side, 2 RU, 75/120:, 2-8Mbit/s Page 20 www.acande.com Patch Panel Solutions AC&E’s range of matching Patch Panels complements the AC&E range of Balun panels thus providing interconnect solution that is highly functional and professional in appearance. Constructed in zinc sealed, black powder coated steel they are built for long life. The Baluns, U Links, Through Adaptors and Patch Cables listed on this page have been designed with compatibility in mind and are intended to be used in and on the patch panels listed here to provide a complete connectivity and interface solution. Select your coaxial connectors from AC&E’s range of BNC, 1.6/5.6, BT43 and 1.0/2.3 listed on the web for your total requirement. STU D Y BE D R O O M BE D R O O M Blank Panels Order Codes - Blank Panels Part No. JS1 Blank JS4 Blank Description C o n c e a le d W irin g Blank Panel, 1 RU, 19”, black powder coated steel Blank Panel, 2 RU, 19”, black powder coated steel 10” RACK M O U N TIN G M O D U LE BNC Panels & Accessories LIVIN G A R E A K ITC H E N Order Codes - BNC Panels JS7/40 BNCU JS3/20 BNCU BNC panel, 20,N2DRU, powder BR O A2DxBA D ISblack TR IBU TIO N coated SYSTEsteel, M empty BNC panel, 1 x 20, 1 RU black powder coated steel, empty Order Codes - BNC Panel Accessories Balun Select anyNumber BNC Standard or Mini from this catalogue Specification: Part VDS001, VDS002 A000409 U Link BNC (m) BNC (m) Power Input 5.5 Watt 50 and 60Hz 230V S267/1M Cablefemale BNC (m) - BNC (m) 1m length Input Connection Patch F-type A000410 BNC (f)-BNC (f) through adaptor (push on), insulated Output Connection 4 x RJ45 sockets (VDS001), 8 x RJ45 sockets (VDS002) AC1291 BNC (f)-BNC (f) through adaptor (bayonet), insulated Frequency Range 47 to 862MHz Gain and Equalisation Set for +2dB system gain with 30m typical Cat5e cable 1.6/5.6 Panels & 88 Accessories Size (2RU) x 254 x 185 (HxWxD) Order 1.6/5.6 Panels TypicalCodes Cable – Lengths: JS3/48 1.6/5.6 Panel, 2x24, 1 RU, black powder coated steel, empty, 15mm pitch Cat. 5e 1656U 40m* JS3P/48 1656U 1.6/5.6 Panel, 2x24, 1 RU, grey fibre reinforced plastic, empty, 15mm pitch Cat. 6 45m* Order Codes - 1.6/5.6 Panel Accessories *Distance depends on the input signal strength and the transmission characteristics of the cable used. A001705 Balun A001702/15/1/N A001716/15/2/N A001716/15/1/N A001717/15/2/N C O AX IA L C A BL E S250/1M/N Through Adaptor 1.6/5.6 (f) to 1.6/5.6 (f) , uninsulated Select any 1.6/5.6 Standard or Mini Balun from this catalogue U Link 1.6/5.6 (m) - 1.6/5.6 (m) screw coupling, 15mm pitch U Link monitor Snap coupling rear entry monitor (f) 26db 15mm pitch U Link monitor Screw coupling rear entry monitor (f) 26db 15mm pitch R J45coupling side TW ISTE D PA IR J45 R O A D B A N DSnap BROAD BAND U Link Bmonitor entry monitor (f) 26db R15mm pitch A M PL IFIER W ALL C AT 5e / 6 W ALL B A LU N B A LU N Patch cable 1.6/5.6 (m) 1.6/5.6 (m), length 1m SO C K ET C A BLE SO C K ET SIN G LE C HA N N EL A PPLIC ATIO N Customised Requirements Specification without notice. This product isPatch supplied for evaluation has yet undergo approvals testing. Should yousubject have toa change requirement for a customized Panel, U Link,and Balun ortoCable please e-mail us at [email protected] with your requirement. www.acande.com page 21 Customised Balun Assemblies Balun Panels Following are examples of customer specific products that we have produced on request to solve specific interface needs.panels You too can haveforyour specific needs addressed by AC&E, by AC&E’s range of Balun are intended specifying your own requirements. Contact by phone, fax or web to discuss your requirements. converting 75: coaxial transmissions to us 120: balanced twisted pair signals. They are based on AC&E’s Channel Mini Balun Balun technology which is the Quad Assembly subject of a number of patent applications. Order Code: B04 040 074 Customer: Nokia A common application is when new equipment designed with twisted pair interfaces needs to be Description: connected an established coaxial environment. This Quad to Channel Balun assembly has been developed for a AC&E’s Balun Panels achieve such an interface Equipment major Worldwide Telecommunication with a minimum of electrical degradation and Manufacturer/Solutions Provider. The product features exceed ITU-G703 for 2-8Mbit/s miniature connectors (4x Type transmissions SMB) and an(2-RJ45 socket. 8-34Mbit/s types request). This package is available extremelyonsmall and is capable of handling Together with matching Patch Patch four channels at E1 (2.048Mbit/s)Panels, or T1 (1.544Mbit/s) rates Cables, U Links and Connectors AC&E offer and has an isolation voltage rating of 1.5KV DC. a Complete Connectivity and Interface Solution. B04040074 Features: The extensive range of panels is available on 19” Rack Mounted Balun Panels short leadtime features:x The size is and small for the purpose of converting 4 coaxial transmission paths into one single RJ45 socket and x packaging Up to 96 baluns 1RU panel height offers mechanical these infunctions into a volume of 31 x 33limit x packing density x 43mm. 5 density varients and 6 configurations available from stock range x Various coaxial connector typesand can be coaxial connectors (others on request) x Stockedcombinations types include of BNC, 1.6/5.6, BT43, SMB 1.0/2.3 incorporated into this design such as 1.6/5.6, Type 43, x BNC, Electrical Characteristics on page 8of connector types can 1.0/2.3 and other variations x be Shielded construction gives excellent is EMC performance accommodated (size adjustment necessary to suit size of coaxial connectors) upon request. x Internal shielding gives low adacent channel cross talk < -80dB x Corporate labeling can be arranged to suit major customer requirements. In addition, for the x Ultra thin panel design (96 balun 45mm, others 33mm) leaves more room for cable entry purpose of technician labeling an area for felt pen marking is provided. x Low Reversable panel allows coaxial or and RJ45 side to be mounted to the front x losses. Insertion Loss: < 0.5dB Return Loss: better than 20dB. x x Adjustable panel recess gives more cable entry space where required Zinc sealed, powder coated steel for rigidity and long life x Mounting brackets may be substituted to support Connector, Integral Balun Pair other standards x Matching Patch and Customer: Blank Panels for Australia a Complete Connectivity and Interface Order Code: B04 023Panels 024 Telstra Solution Description: Ultra High Density Panel 96 Coax Connector, Integral Balun Pair, Balun 75-120: (for Ericsson ISDN to 48 RJ45, 1RU, 75/120: B04023024 PRA Interface) Features: x Allows unbalanced coaxial type 75: equipment to simply connect to 120: shielded twisted pair. It provides interfacing to two separate circuits (a ’go‘ and ’come‘ path). x Avoid more costly and space consuming 75: hardware for patching at the distribution frame. x Minimal losses and distortion - refer ’Black‘ Balun characteristics. (refer page 10). x Low cost and optimal size form a simple design with minimal component count, being integral with existing connectors typically used in ISDN Interface Cards on AXE Systems. x Electrically shielded between adjacent circuit. Tx Tx Tx Rx Rx Rx Rx Tx Tx Tx Tx Rx Rx Rx Rx Tx Cross Talk Performance (Isolation): Order codes x Adjacent Balun near End Cross Talk is better than 35dB up to 34MHz and better than 28dB up M13 98 R1 BT43 (m) to RJ45, 96x48, 1RU, 75/120:, 2-8Mbit/s to049 80MHz. M13 044 98 R1 (f) to RJ45, 96x48, 1RU, 75/120:, 2-8Mbit/s x Other electrical1.0/2.3 parameters - refer Standard 2-8Mbit/s Balun in this catalogue. Page 22 www.acande.com DB9 to Coaxial Connector Order B10 003 054 DB9(m) 48 Coax(f)to 24 Customer: RJ45, 1RU,Lucent 75/120: Highcode: Density Balun Panelto 1.6/5.6 B10 048 054 DB9(m) to Type 43 (m) Customer: Lucent Description: A simple solution to the problem of converting a 2Mbit/s (E1) signal from twisted pair 120: to coaxial 75: in one compact adaptor. This device has shielding compliant with EMC requirements and transmission performance to ITU-T G.703 requirements. This is a typical cost effective solution for transferring a clock signal from network to another. Orderone codes Tx Tx Rx Rx DB9 to Coaxial Baluns M13 009 44 R1 BNC (f) to RJ45, 48x24, 1RU, 75/120:, 2-8Mbit/s 1.6/5.6 (f) to RJ45, 48x24, 1RU, 75/120:, 2-8Mbit/s M13 049 44 R1 BT43 (m) to RJ45, 48x24, 1RU, 75/120:, 2-8Mbit/s x Bit rates of 2 and 8Mbit/s M13 044 44 R1 1.0/2.3 (f) to RJ45, 48x24, 1RU, 75/120:, 2-8Mbit/s Features: M13 003 44 R1 x x High speed Bit rates, 34 to 155Mbit/s on request. Low insertion loss figures together with good return loss performance and meets the mask performance of ITU-Telecommunication G.703. (refer to mini-balun electrical performance). x Gives low cross-talk and excellent EMC performance. 32 SMA/B/C, Coax to 161.0/2.3 RJ45, etc. 1RU, 75/120: Medium Balun Panel x Adaptable Density to other coaxial connectors. eg: BNC, x Designed for Impedance Matching – typically 50 or 75: to 100 or 120 or 150:. x Cost effective high reliability product with good surge performance ITU-T K17. 16 x E1 Transmission Path Interface Module Order Code: K125 Customer: Nortel Tx Description: Panel assembly containing 16 x Type 43 male connectors and having 75/120: Mini Baluns then to Male D Sub Connector (44 Orderconnecting codes pin). Rx Tx Tx Tx Rx Rx Rx M13 009 36 R1 BNC (f) to RJ45, 32x16, 1RU, 75/120:, 2-8Mbit/s M13 003 36 R1 (f) to RJ45, 32x16, 1RU, 75/120:, 2-8Mbit/s The assembly was1.6/5.6 designed to work at 2Mbit/s M13 049 36 R1 BT43 RJ45, 32x16, 1RU, and complying with(m) to International EMC75/120:, 2-8Mbit/s M13 044 36 R1 It 1.0/2.3 (f) to RJ45, 32x16, 1RU, a75/120:, 2-8Mbit/s requirements. was custom built to suit defined volume within a modern UTMS System. Single Sided Balun Panel 32 Coax to 16 RJ45, 2RU, 75/120: Features: x x x x Allows for earthing options for Tx and Rx paths. Identification strip which allows labelling of each transmission path. A handle is provided on the assembly to allow it to be installed in a confined space as well as provision for sealing the assembly within the System so that minimum exposure of the cables is provided. The frame is only 155 x 45mm and 75mm deep. Refer to mini-baluns for mechanical and electrical detail Order codes M13 009 36 R6 M13 003 36 R6 M13 049 36 R6 M13 044 36 R6 BNC (f) to RJ45, 32x16, 2RU, 75/120:, 2-8Mbit/s 1.6/5.6 (f) to RJ45, 32x16, 2RU, 75/120:, 2-8Mbit/s BT43 (m) to RJ45, 32x16, 2RU, 75/120:, 2-8Mbit/s 1.0/2.3 (f) to RJ45, 32x16, 2RU, 75/120:, 2-8Mbit/s www.acande.com page 23 Telco Connector Balun Cable Assemblies Balun Panel 32 Coax to 2x50way Telco, 1 RU, 75/120: Tx Tx Tx Tx Rx Rx Rx Rx Order Codes M13 009 32 T1 M13 003 32 T1 M13 049 32 T1 M13 044 32 T1 BNC (f) to 2x50way Telco, 1RU, 75/120:, 2-8Mbit/s 1.6/5.6 (f) to 2x50way Telco, 1RU, 75/120:, 2-8Mbit/s BT43 (m) to 2x50way Telco, 1RU, 75/120:, 2-8Mbit/s 1.0/2.3 (f) to 2x50way Telco, 1RU, 75/120:, 2-8Mbit/s Description: A range of Balun Cable Assemblies are available with your selection of connector types at either ends. Nominal Impedance ratios of 75 to 120: and bit rates are selectable from the Mini-baluns Low Density Balun PanelOn16the Coax to 8 RJ45, 75/120: of single or multishown on page 13 of this handbook. balanced side1RU, a selection connectors are available with various forms of mounting and/or shielding. The cable selection is arranged in Characteristic Impedances and/or shielding cost benefits. Coaxial Side (with Mini-balun) Type 43 1.6/5.6 1.0/2.3 BNC Customised Cable Types Recommended for Minibaluns. (CBTP26301) UTP, Cat.5e or Cat.6 STP, Cat 5 Customised Tx Twisted Pair Side RJ45 Plug (shielded or non-shielded) DB9 to 37 for plug or socket Bantam Plugs Customised Rx Tx Rx Optional cable labels and cable stress relief attachments are available Order Codes Examples: M13 009 18 R1 BNC (f) to RJ45, 16x8, 1RU, 75/120:, 2-8Mbit/s M13 003 18 R1 1.6/5.6 (f) to RJ45, 16x8, 1RU, 75/120:, 2-8Mbit/s PtM13 No 049 ‘S281/3M’ 065 16x8, to 1RU, 75/120:, Pt2-8Mbit/s No ‘S440/1M’ using 2 x B04 003 065 to 18 R1 using BT43B04 (m) 001 to RJ45, Krone 4P on CBTP26301 RJ45 on STP Cat 5 M13 044 18 R1 1.0/2.3 (f) to RJ45, 16x8, 1RU, 75/120:, 2-8Mbit/s Single Sided Balun Panel 16 Coax to 8 RJ45, single sided, 2RU, 75/120: Order Codes M13 009 18 R6 M13 003 18 R6 M13 049 18 R6 M13 044 18 R6 BNC (f) to RJ45, 1 Side, 2 RU, 75/120:, 2-8Mbit/s 1.6/5.6 (f) to RJ45, 1 Side, 2 RU, 75/120:, 2-8Mbit/s BT43 (m) to RJ45, 1 Side, 2 RU, 75/120:, 2-8Mbit/s 1.0/2.3 (f) to RJ45, 1Side, 2 RU, 75/120:, 2-8Mbit/s Page 24 www.acande.com PatchSolutions DDF Panel Solutions AC&E’s range of matching Patch DDF Temporary Patching UnitPanels complements the AC&E range of Balun panels 2 x 510 Ohm PART No LSS PP2 4 x Port thus providing interconnect solution that PART No LSS PP3 4 x Port (SI353/970) is 2 x 1K2 Ohm highly functional and professional in appearance. Constructed in zinc sealed, black powder coated steel they are built for long life. The Baluns, U Links, Through Adaptors and WITH OPTIONAL PATCH LEADS: Patch Cables listed on this page have been 4 Pole to 4 Pole Krone, lead 5m designed with compatibility in mind and are length. (S308/..M) intended to be used in and on the patch panels 2 Pole to 2 Pole Krone, lead 30cm listed here to provide a complete connectivity length. (S332/..M) and interface solution. Select your coaxial connectors from AC&E’s range of BNC, 1.6/5.6, BT43 and 1.0/2.3 listed LSS993 on the web for your total requirement. Description: Twisted Pair Frames (Digital Distribution Frame) are common in Telephone & Data Exchanges, Blank Panels particularly where Krone IDC Block (modules) are used. For DDF’s using 2 and 8Mbit/s services there often an emergency need to deploy patching units at strategic positions on the frame. OrderisCodes - Blank Panels Part No. Description This unit allows theBlank insertion on the frame where JS1 Blank Panel,anywhere 1 RU, 19”, black powder coated steellocalised patching is required. Having placed the unit at the most appropriate position on the frame, looping in and out of the JS4 Blank Blank Panel, 2 RU, 19”, black powder coated steel unit is simple and live traffic can be readily patched through it. Monitor positions are immediately set-up providing low risk to the main data flow (26dB or 20dB attenuation). A test access is provided as well. Each of these units has a four circuit configuration installed. A ‘Hitless’ data BNC Panels & Accessories flow situation is then provided. S267/1M Order Codes - BNCleads Panels A range of patch are available for use with the unit, refer to AC&E for Technical JS7/40 BNCU BNC panel, 2 x 20, 2 RU, black powder coated steel, empty information. JS3/20 BNCU BNC panel, 1 x 20, 1 RU black powder coated steel, empty The unit features a standard Krone Block 8 position (or 10 position on request). The unit looks Order Codes - BNC Panel Accessories like a standard Block but has the necessary attenuators and wiring on the unit, which can be Balun Select any BNC Standard or Mini from this catalogue slotted into an emptyUposition on the frame without interfering with the other Blocks. A000409 A000409 Link BNC (m) - BNC (m) S267/1M Patch Cable BNC (m) - BNC (m) 1m length Features: A000410 BNC (f)-BNC (f) through adaptor (push on), insulated xAC1291 26dB or 20dB Isolation Resistor to avoid interruption riskinsulated to data traffic (Hitless). BNC (f)-BNC (f) through adaptor (bayonet), x Connection between the Test Point and Patch Point. x Cross-Over at Patch position (allows the same cross patch cords for both normal and patch positions). 1.6/5.6 Panels & Accessories A001705 x Use of 4 Pole polarised Krone plugs, which can prevent the plugs from causing inversion connection. Order Codes – 1.6/5.6 Panels xJS3/48 Minimises cord Panel, congestion the DDF (by placing these units15mm in the appropriate 1656U patch1.6/5.6 2x24, 1on RU, black powder coated steel, empty, pitch position on the frame). JS3P/48 1656U 1.6/5.6 Panel, 2x24, 1 RU, grey fibre reinforced plastic, empty, 15mm pitch Circuit diagram of one module shown; there are 4 modules in one unit. Order Codes - 1.6/5.6 Panel Accessories A001705 Balun A001702/15/1/N A001716/15/2/N A001716/15/1/N A001717/15/2/N S250/1M/N Through Adaptor 1.6/5.6 (f) to 1.6/5.6 (f) , uninsulated Select any 1.6/5.6 Standard or Mini Balun from this catalogue U Link 1.6/5.6 (m) - 1.6/5.6 (m) screw coupling, 15mm pitch U Link monitor Snap coupling rear entry monitor (f) 26db 15mm pitch U Link monitor Screw coupling rear entry monitor (f) 26db 15mm pitch U Link monitor Snap coupling side entry monitor (f) 26db 15mm pitch Patch cable 1.6/5.6 (m) - 1.6/5.6 (m), length 1m Customized Requirements Should you have a requirement for a customized Patch Panel, U Link, Balun or Cable please e-mail us at [email protected] with your requirement. www.acande.com page 25 Customised Video BalunsBalun Assemblies A selectionare Following ofexamples analogue ofBaluns customer are specific availableproducts that arethat designed we have forproduced on request to solve specific needs.composite You too video can have your specific use with interface DC to 6.5Mhz signals. Such signalsneeds are addressed by AC&E, by specifying your own requirements. Contact us by phone, fax or web to discuss your requirements. typically found originating from consumer and professional video equipment. Quad Channel Balun Assembly Coupling signals from remote Video Cameras to recorders, display Order Code: B04 040 074 Customer: Nokia B00019010 systems and monitors in broadcasting, surveillance and security Description:are the most common uses. applications This Quad Channel Balun assembly has been for a to be AC&E Video Baluns allow long lengths of developed coaxial cable major Worldwide Telecommunication Equipment replaced with lower cost twisted pair cable. They also allow the use Manufacturer/Solutions Provider. The product features of existingconnectors twisted pair(4x infrastructure cable and miniature Type SMB)such and as an telephone RJ45 socket. B00008010 This package is extremely small and is capable of handling Cat 5 computer networking cables. four channels at E1 (2.048Mbit/s) or T1 (1.544Mbit/s) rates and has an isolation voltage rating of 1.5KV DC. The AC&E Video Baluns offer the following performance features:x Available in Standard and Mini Balun Enclosures Features: x No power or batteries x The size is small for the purpose of converting 4 coaxial x IEC Standard connection transmission paths BNC into coaxial one single RJ45 socket and x IDC twisted pair termination strainof relief packaging these functions into awith volume 31 x 33 x 43mm. x 75/120: transformation x Various combinations of coaxial connector types can be x Small size and rugged construction incorporated into this design such as 1.6/5.6, Type 43, x 1.0/2.3 Minimaland Lossother distortion and reflection per unit BNC, variations of connector types can bex accommodated (sizeand adjustment is necessary Other Connectors impedances on requestto suit size of coaxial connectors) upon request. x Panel solutions also available x Corporate labeling can be arranged to suit major customer requirements. In addition, for the purpose of technician labeling an area for felt pen marking is provided. x Low losses. Insertion Loss: < 0.5dB and Return Loss: better than 20dB. Electrical Performance x Frequency Range: DC to 8MHz Connector, Integral Balun x Drive distance: 100mPair recommended max. Twisted pair Orderx Code: B04 023 024 Customer: Telstra Australia Insertion Loss (Typ): Telephone cable 0.5dB (1m); 3dB (100m) Part No. Description B00 008 065 000000000 Video Mini Balun, Analogue BNC (m) to AC&E clamp IDC, 75/120: Description: B00 008 010 Video Balun, Analogue, BNC (m) to Krone IDC, 75/120: Connector, Integral Balun Pair, 75-120: (for Ericsson ISDN B00 019 010 Video Balun, Analogue, BNC (f) to Krone IDC, 75/120: PRA Interface) Features: x Allows unbalanced coaxial type 75: equipment to simply connect to 120: shielded twisted pair. It provides interfacing to two separate circuits (a ’go‘ and ’come‘ path). x Avoid more costly and space consuming 75: hardware for patching at the distribution frame. x Minimal losses and distortion - refer ’Black‘ Balun characteristics. (refer page 10). x Low cost and optimal size form a simple design with minimal component count, being integral with existing connectors typically used in ISDN Interface Cards on AXE Systems. x Electrically shielded between adjacent circuit. Cross Talk Performance (Isolation): x Adjacent Balun near End Cross Talk is better than 70dB up to 34MHz and better than 50dB up to 80MHz. x Other electrical parameters - refer Standard 2-8Mbit/s Balun in this catalogue. Insertion Loss B00 019 010 Page 26 Return Loss B00 019 010 www.acande.com new Active splitter unit deviceCable has shielding compliant with EMCvideo subMost This Structured Systems have a broadband requirements and will transmission performance to system. This sub-system use components that are separate from ITU-T G.703 requirements. This including is a typical cost cable and the remaining Structured Cable System coaxial effective solution for transferring a clock signal dedicated outlets. DB9 to Caxial Baluns from one network to another. Coaxial cable is the traditional transmission line for video, however its useFeatures: in Structured Cabling Systems means that there must be dedicated outlets for the video system. The result is a non-flexible Bit rates 2 and 8Mbit/s video x solution. As of one of the selling points of Structured Cabling Systems flexibility believed a more flexible video system x isHigh speedAC&E Bit rates, 34 to 155Mbit/s on request. shouldxbe developed. Low insertion loss figures together with good return loss performance and meets the mask performance of ITU-Telecommunication G.703. (refer to mini-balun electrical performance). Imagine having ancross-talk outlet at and eachexcellent corner of the performance. room that can x Gives low EMC provide Telephone, Internet or Video by simply moving a patch 1.0/2.3 etc. x Adaptable to other coaxial connectors. eg: BNC, SMA/B/C, lead at your patch panel. x Designed for Impedance Matching – typically 50 or 75: to 100 or 120 or 150:. Picture VDCP05 Fly lead x Cost effective high reliability product with good surge performance ITU-TofK17. This is the goal AC&E have set out to achieve. We have designed a video sub-system that utilises the exact same cables and outlets as the remainder of your Structured Cable System. BVD. 16 x E1 Transmission Path Interface Module Order Code: K125 Video Distribution Customer: Nortel BVD is a Broadband system designed and manufactured by AC&E in Australia. It is a truly flexible network. Any Description: data outlet supplied by Cat5e, Cat6 or Cat7 cable can also be a Panel assembly containing 16 x Type 43 male video outlet. connectors and having 75/120: Mini Baluns then connecting to Male Sub Connector (44 including our By incorporating high quality RF D distribution techniques provenpin). balun designs, AC&E have made distribution of broadband signals through Cat5e and Cat6 UTP cables possible. Removing the The assembly was designed to work at 2Mbit/s requirement to install coaxial cable and dedicated outlets. and complying with International EMC It was custom built suit provides a Alongrequirements. with increased flexibility, BVD toalso cost defined volume within a modern UTMS System. advantages by offering a one cable, one outlet solution for all services. K125 BVD consists of both active and passive modules. Passive modules Features: allow for the provision of a customer-specified amplifier. A return Allows depending for earthingon options for Tx and Rxselection. paths. The 8 path isx available external amplifier x Identification which allows labelling of each way active module has astrip sloped output stage designed to meet the transmission requirements of differing path. cable lengths inherent in all installations. x A handle is provided on the assembly to allow it to be installed in a confined space as well as provision for sealing AC&E the assembly within theenable System so that minimum exposure of the cables Special Fly-leads, incorporating balun technology BVD provided. to plug into is the standard coaxial connection on any TV. x The frame is only 155 x 45mm and 75mm deep. Refer to mini-baluns for mechanical and For more information on the BVD range please contact your AC&E electrical detail representative. www.acande.com page 27 broadband distribution systems DB9technology to Coaxial Connector As modern becomes more integral with our lives, many Order code: B10 003 054in every DB9(m) to of 1.6/5.6 (f) Customer: Lucent people require a multi-function outlet room their home. B10 048 054 DB9(m) to Type 43 (m) Customer: Lucent For this reason Structured Cable Systems are one of the fastest Description: growing segments of construction industries, globally. They are sold A simple solution to theagainst problem of requirements, converting a enabling to customers as future proofing data 2Mbit/s (E1) twisted pair using 120:patch to panels home automation andsignal offeringfrom greater flexibility, Picture of coaxial 75: in services one compact adaptor. to distribute different to each data outlet. notes Balun Cable Assemblies Description: A range of Balun Cable Assemblies are available with your selection of connector types at either ends. Nominal Impedance ratios of 75 to 120: and bit rates are selectable from the Mini-baluns shown on page 13 of this handbook. On the balanced side a selection of single or multiconnectors are available with various forms of mounting and/or shielding. The cable selection is arranged in Characteristic Impedances and/or shielding cost benefits. Coaxial Side (with Mini-balun) Type 43 1.6/5.6 1.0/2.3 BNC Customised Cable Types Recommended for Minibaluns. (CBTP26301) UTP, Cat.5e or Cat.6 STP, Cat 5 Customised Twisted Pair Side RJ45 Plug (shielded or non-shielded) DB9 to 37 for plug or socket Bantam Plugs Customised Optional cable labels and cable stress relief attachments are available Examples: Pt No ‘S281/3M’ using B04 001 065 to Krone 4P on CBTP26301 S281/3M Pt No ‘S440/1M’ using 2 x B04 003 065 to RJ45 on STP Cat 5 S440/1M Page 28 www.acande.com notes www.acande.com page 29 notes Balun Cable Assemblies Description: A range of Balun Cable Assemblies are available with your selection of connector types at either ends. Nominal Impedance ratios of 75 to 120: and bit rates are selectable from the Mini-baluns shown on page 13 of this handbook. On the balanced side a selection of single or multiconnectors are available with various forms of mounting and/or shielding. The cable selection is arranged in Characteristic Impedances and/or shielding cost benefits. Coaxial Side (with Mini-balun) Type 43 1.6/5.6 1.0/2.3 BNC Customised Cable Types Recommended for Minibaluns. (CBTP26301) UTP, Cat.5e or Cat.6 STP, Cat 5 Customised Twisted Pair Side RJ45 Plug (shielded or non-shielded) DB9 to 37 for plug or socket Bantam Plugs Customised Optional cable labels and cable stress relief attachments are available Examples: Pt No ‘S281/3M’ using B04 001 065 to Krone 4P on CBTP26301 Page 30 Pt No ‘S440/1M’ using 2 x B04 003 065 to RJ45 on STP Cat 5 www.acande.com Glossary of Terms Insulation Displacement Connection. ITU-G.703 International Telecommunication Union – standard for Data Transmission between stations 1RU 1 Rack Unit height. 44mm height for Panels to fit into a rack cavity of 45mm ISO 9001:2000 Quality Management System requirements for manufacturing, warehousing and design DDF Digital Distribution Frame RFI/EMC Radio Frequency Interference/Electromagnetic Compatibility Krone Krone a manufacturer of IDC connectors PAL Connector recognised connector used in the TV Industry. Cat.5e and Cat.6 Two types of cable used extensively for computer networking. RJ45 A type of modular plug and socket used with the above cables 1.6/5.6, 1.0/2.3 Type 43, SMB, BNC Common Coaxial connector types used in the Telecommunication Industry. ESD Electro-Static Discharge ITU: K17 recognised pulse surge test (type test) ISDN Integrated Systems Digital Network AXE A type of Ericsson Switching System ETSI European Rack System-specification Telco a type of multi-terminal connector D9, D15, D25, D37 a type of multi terminal connector UTMS a form of Mobile Telephone System (Cell phone System) Telecommunication Data Bit Rate Names: E1 2.048Mbit/s E2 8.448Mbit/s E2 = 4 x E1 E3 34.368Mbit/s E3 = 4 x E2 E4 139.264Mbit/s E4 = 4 x E3 T1 1.544Mbit/s T2 6.312Mbit/s T2 = 4 x T1 T3 44.736Mbit/s T3 = 7 x T2 General Conditions AC&E reserves the right to change product specifications and availability without notice. www.acande.com page 31 glossary of terms IDC