High-e Ciency Brushless Motor Provides Higher Power And

Transcript

Satisfy Needs Ergonomically designed handle with soft grip Compatible with the following Makita 18V Li-ion batteries Cordless Circular Saw DHS680 165mm (6-1/2”) BL1850: 18V 5.0Ah BL1840: 18V 4.0Ah BL1830: 18V 3.0Ah BL1820: 18V 2.0Ah BL1815N: 18V 1.5Ah Tool hanger Rear dust exhaust port Optional dust nozzle Part No. 196961-1 Blower function blows sawdust off the cut line ahead for a better cutting view. Bevel cuts up to 50 degrees Large lock-off lever Twin LED Job light • brightly illuminates the blade and cut line for easy cutting of workpiece in the dark place. • with preglow function 50° easy-to-operate even with gloved hand Charger DC18RC Two Port Multi Fast Charger DC18RD Charging time (3.0Ah) 22minutes Four Port Multi Charger DC18SF Charging time (3.0Ah) 1 to 2 batteries : 60minutes 3 to 4 batteries : 120minutes DC18SD Charging time (3.0Ah) 60minutes Cordless Circular Saw DHS680 165mm (6-1/2") Brake Dust Collecting Built-in Job Light DC18SE (Automotive) Carrying Case Charging time (3.0Ah) 60minutes Soft Start Max cutting capacity at 0 degrees : 57mm (2-1/4") at 45 degrees : 41mm (1-5/8") at 50 degrees : 37mm (1-7/16") Blade diameter 165mm (6-1/2") No load speed (rpm) 5,000 Dimensions BL1850 : 350x170x238mm (L x W x H) (13-3/4"x6-11/16"x9-3/8") BL1815N : 336x170x238mm (13-1/4"x6-11/16"x9-3/8") Net weight BL1850 : 3.3kg (7.3lbs) BL1815N : 3.1kg (6.8lbs) Standard Equipment : Fast Charger, Battery Cartridge, TCT Saw Blade, Hex Wrench, Rip Fence weight according to EPTA-Procedure 01/2003 Items of standard equipment and specifications may vary by country or area. Makita Corporation 3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan PRINTED IN JAPAN BE-AJ High-efficiency Brushless motor provides higher power and more work amount. High Power Cutting Predecessor Model 202mm Compact and lightweight design DHS680 160mm achieved by: • Downsized motor and better placement of parts • Using durable but light magnesium die-cast for Base, Blade case and Safety cover. Predecessor Model DHS680 3.5kg 3.3kg Optional dust nozzle Automatic speed control automatically changes the cutting speed according to load condition for an optimum operation: • On light duty: high-speed rotation mode • On heavy duty: high torque mode • 1 solid green LED: high torque mode Optional dust nozzle (Part No. 196961-1) can be attached for use with a vacuum cleaner. (For European countries, this dust nozzle is supplied as a standard equipment.) ■Comparison of Efficiency Test conditions： Test material: SPF of 2 x 10 (38mm x 235mm) Bevel angle: 0º Work amount (on a single full battery charge) Cutting Speed Slow Fast Small DHS680 135 DHS680 Competitor A 135 Competitor A Predecessor Model 100 LED indicator panel for 3 indications Predecessor Model Large 125 115 100 0 50 100 0 50 100 150 200 Note: 1. The test results depend to a great extent on the hardness of materials, etc. 2. The numbers in the charts are relative values when the capacities of the predecessor model are indexed at 100. 150 200 (1) Battery fuel gauge (active after the switch trigger has been released) The power remaining in the battery can be indicated in 3 stages: • 3 solid red LEDs : more than 50% of full battery capacity • 2 solid red LEDs : 20% to 50% of full battery capacity • 1 solid red LED : less than 20% of full battery capacity Tool hanger Guide rail (Option) Overall length 1.4m 1.9m 3m Part No. 194368-5 194925-9 194367-7 (2) Indication of Automatic speed control (active during operation) • All LEDs off: high-speed rotation mode • 1 solid green LED: high torque mode (3) Indication of Overload All LEDs start linking when Overload protection has been activated to stop the motor. Guide rail adapter (Option) Part No. 196953-0