Transcript
High End F-100 Fog Generator Architectural Specifications The unit shall be model F-100™ performance fog generator. The native machine shall accept input logic from 0-10 V analog. Remote addressing shall be made available via 0-10 V. or DMX-512 digital protocol depending on which remote controller is selected and used. Three types of fog fluid shall be available for use with the unit, these being specially formulated to provide for three different uses. These fluids shall be known as HQ, Stage, and Coldflow® formulas. HQ shall have a slower dispersal rate than Stage so HQ shall posses a longer hang time then Stage formula. Coldflow formula is intended specifically for use with the Coldflow LCO2 exchanger module. F-100 shall possess a fluid level sight gauge, user replaceable fluid filter, variable duration and interval timing controls, a built-in 100 mm (4") output collar enabling it to be easily attached to optional distribution ducting. Dimensions shall be 209 mm H x 298 mm W x 686 mm L (8.25" H x 11.75" W x 27" L) and the unit shall weigh 14.5 Kg. (32 Lb.). F-100 shall be ETL and cETL listed and shall comply with the requirements of European standard EN 60335-1. The F-100 shall comply with US CFR47, Part 15, FCC interference limits for Class A digital devices and with European standards for electromagnetic compatibility: EN 55022, Class A limits for emissions, and IEC 801-2, IEC 801-3, and IEC 801-4 for susceptibility. The unit shall be identified as F-100™ manufactured and sold by High End Systems, Inc. of Austin, Texas, USA.
