Transcript
Coaxial
High Isolation Switch 50W SPST, Absorptive Maximum Ratings Operating Temperature
-55°C to 100°C
Storage Temperature
-55°C to 150°C
RF Input Power
see Table
Control Current 500 µA Typ. at Vc=-9 to -12V Permanent damage may occur if any of these limits are exceeded.
Coaxial Connections RF IN RF OUT CONTROL 1 CONTROL 2
2 3 1 S
DC4 to 2000 MHz Features
• wideband, DC to 2000 MHz • low insertion loss, 1.3 dB typ. • low video leakage 30 mVp-p typ. • very fast switching
Condition (MHz)
Isolation (In to Out)2
VSWR - RF IN and RF OUT (ON STATE ) VSWR - RF IN (OFF STATE) VSWR - RF OUT (OFF STATE) Video Leakage3 Rise / Fall Time Switching Time – Turn On Switching Time – Turn Off Control Voltage (Vc)
J ---
K ---
G H .125 1.000 3.18 25.40
L M N P .125 1.688 2.18 .75 3.18 42.88 55.37 19.05
Q wt .07 grams 1.78 75.0
The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications
Electrical Specifications Parameter
1dB Compression1
E F .38 1.000 9.65 25.40
+RoHS Compliant
• PCN • cellular • antenna switching
Outline Drawing
A B C D 1.25 1.25 .75 .63 31.75 31.75 19.05 16.00
CASE STYLE: J17 Connectors Model SMA ZFSWHA-1-20+ BRACKET (OPTION “B”)
Applications
Frequency4 Insertion Loss
Outline Dimensions (inch mm )
ZFSWHA-1-20+
Control Current Max RF Input Power Steady State (not hot switching) Max RF Input Power Hot Switching (as modulator)
DC to 100 MHz 100 to 1000 MHz 1000 to 2000 MHz DC to 100 MHz 100 to 1000 MHz 1000 to 2000 MHz DC to 100 MHz 100 to 1000 MHz 1000 to 2000 MHz DC to 200 MHz 200 to 2000 MHz DC to 200 MHz 200 to 2000 MHz DC to 200 MHz 200 to 2000 MHz 10 to 90% 50% Control to 90% RF 50% Control to 10% RF Low High 0 to -8V DC to 20 MHz 20 to 500 MHz 500 to 2000 MHz DC to 20 MHz 20 to 500 MHz 500 to 2000 MHz
Min
Typ.
Max
Units
DC 60 58 58 -
0.8 1.3 1.3 19 19 26 75 65 65 30 3 7
2000 1.2 1.7 1.7 1.25 1.5 1.25 1.5 1.4 1.5 50 5 10
MHz dB
-
3
10
-0.2 -8 -
+23 +30 +33 +14.5 +20 +27
0 -5 200 -
dBm
dB
:1 :1 :1 mV p-p nS nS nS V µA dBm
dBm
CAUTION – IMPORTANT: RF PORTS MUST BE DC BLOCKED or HELD to 0V DC 1. 1dB Compression is specified at Control Voltage (Vc)= -8V 2. Isolation is specified RF IN to RF OUT with Control Logic = Off 3. Video leakage or breakthrough is defined as leakage of switching control signal to RF output port 4. All RF connections must be DC blocked or held at 0V DC.
Electrical Schematic
CONTROL LOGIC Control Ports 1
2
-V 0
0 -V
RF outputs
Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500
[email protected]
On Off
REV. C M151107 ZFSWHA-1-20+ WP/CP/AM 160127 Page 1 of 2
ZFSWHA-1-20+ Typical Performance Data FREQ. (MHz)
ON
INSERTION LOSS (dB) (ctrl1 @ -8V, ctrl 2 @ 0V) IN-OUT — x
0.30 5.30 10.30 100.29 280.26 390.24 445.23 610.21 780.18 890.17 945.16 1000.15 1165.13 1335.10 1445.08 1500.08 1665.05 1835.03 1945.01 2000.00
— x
σ 0.01 0.01 0.01 0.01 0.01 0.00 0.01 0.01 0.01 0.01 0.01 0.00 0.02 0.02 0.02 0.02 0.01 0.01 0.03 0.01
0.8 0.4
IN
OUT ON — x
— x
3.68 6.29 4.25 1.22 1.83 1.35 1.41 1.85 1.97 2.32 2.05 1.47 2.35 1.70 1.64 2.10 1.78 0.70 1.60 1.47
100
1.2
1.15 1.16 1.16 1.15 1.15 1.15 1.16 1.16 1.17 1.18 1.18 1.18 1.18 1.17 1.16 1.16 1.15 1.14 1.13 1.13
at RF level of 10 dBm
OFF — x
1.15 1.15 1.15 1.15 1.14 1.14 1.15 1.15 1.16 1.16 1.16 1.15 1.15 1.14 1.13 1.12 1.10 1.07 1.06 1.05
1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.12 1.13 1.14 1.17 1.20 1.22 1.23
ZFSWHA-1-20+ ISOLATION
90 80 70 60 50
0.0 0
1.5
90.61 85.48 83.23 67.92 66.96 67.09 67.05 65.89 64.48 63.58 63.07 62.55 61.49 61.45 61.66 62.32 60.72 60.34 60.54 61.08
ZFSWHA-1-20+ INSERTION LOSS
1.6
VSWR
σ
ISOLATION (dB)
INSERTION LOSS (dB)
2.0
at RF level of 10 dBm
0.62 0.63 0.69 0.79 0.85 0.92 0.90 0.96 0.99 1.02 1.04 0.99 1.09 1.11 1.14 1.09 1.17 1.13 1.22 1.17
OFF ISOLATION (dB) (ctrl 1 @ 0V, ctrl 2 @ -8V) IN-OUT
400
at RF level of 10 dBm
INPUT
800 1200 FREQUENCY (MHz)
1600
2000
0
400
800 1200 FREQUENCY (MHz)
1600
2000
ZFSWHA-1-20+ VSWR OUT-ON
OUT-OFF
VSWR
1.4 1.3 1.2 1.1 1.0 0
400
800
1200
1600
2000
FREQUENCY (MHz)
Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500
[email protected]
Page 2 of 2
