High Performance Power Management Products

Transcript

HIGH PERFORMANCE POWER MANAGEMENT PRODUCTS from the Analog Leader Visit analog.com/power 2 High Performance Power Management Products High Performance Power Management Products from the Analog Leader Table of Contents Analog Devices has set the standard for high performance signal processing semiconductors for five decades. ADI’s power management products continue that proud tradition, exceeding the high expectations of reliability, innovation, and value our customers have come to expect. Who better to understand the power requirements of high performance signal processing chains than ADI? Power for Analog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 This brochure provides an overview of our power management product portfolio for applications including industrial, instrumentation, imaging, communications and computing infrastructure, and consumer electronics. We understand that complete solutions must include products that address real-world needs, design aids that decrease your time to market, and a world-class organization that stands behind its products. So, in addition to great products, we have developed best-in-class web tools for product selection, design, simulation, optimization, and evaluation board customization. We have also established a corps of power management experts in locations around the world with access to our customer applications centers to help you quickly develop effective solutions. Power Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 The Fastest and Most Accurate Voltage Regulator Design and Optimization Tool . . . . . . . . . . . . . . . . 6 Low Dropout Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Switching Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Switching Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Integrated Power Management Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Ultralow Power Microenergy Harvesters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Ultralow Power Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Digital Power and Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Power Development Centers XX San Jose, CA, U.S.A. XX Limerick, Ireland XX Beijing, China XX Edinburgh, Scotland XX Ft Collins, CO, U.S.A. XX Shanghai, China Hot Swap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Load Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Sequencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Supervisory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Low Power Comparators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Isolated Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Display/Illumination Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Flash LED Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Keypad I/O Expanders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 DSP Companion Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Visit analog.com/power Power Chains Communications Infrastructure Power Chain Isolated AC-to-DC Power Supply Single Output Controller Primary Controller 0V ADP1046/ ADP36xx DRIVER –48 V Feed B iCoupler ADP1046/ ADP1053 ADP36xx Driver ADP5070 –15 V @ 100 mA ADM1278 Hot Swap and Power Monitor PWM Control, Monitors, and Drivers AUX Power 5V ADP187x Family Feed A iCoupler +15 V @ 100 mA 12 V Bus Main Power ADP1047/ ADP1048 EMI Filter AC Input Dual Buck Regulator VPOS and VNEG Intermediate Bus Architecture Isolated DC-to-DC Power Supply PFC ADM1186/ ADM6710/ ADM2914 Quad Sequencer Quad Supervisor Quad UV and OV Quad Buck Regulator (6 A, 6 A, 2 A, 2 A) ADP1740/ ADP1741 1.2 V @ 2 A 2A LDO iCoupler ADM1075 Sequence And Control 0.9 V @ 5 A 1.8 V @ 4 A 1.2 V @ 1.2 A ADP5054 3.3 V @ 1.5 A Color Key –48 V Hot Swap and Power Monitor AC-to-DC and DC-to-DC Power Controllers And Mosfet Drivers ADP7182 ADM660 iCoupler and isoPower Isolators Integrated Switcher Switching Controllers ADM1166/ADM1168/ ADM1169 Sequencer, Monitoring, Margin, Black Box Recorder Integrated Switching Regulators Linear Regulators Hot Swap Controllers/Power Monitors/Load Switch ADP2370/ ADP2371 Charge Pump Inverter Load Switch ADP198 ADM7150 ADM1191 Power Monitor 5 V @ 15 A Integrated Switcher 3.3 V @ 4 A Power Management Unit ADP2164 Industrial and Instrumentation Power Chain ADM708 ADP7142 3.3 V ADP2441 +15 V Watchdog Timer ADP1614 Reset Generator 20 V @ 1.2 A ADCMP361 Comparator And Reference 2.5 V @ 350 mA ADM7154 +5 V LDO ADP7182 ADP1621 ADM6316 Integrated Boost 24 V Rail (18 V TO 36 V) 3.3 V @ 500 mA 5 V @ 500 mA 300mA LDO Single Output Controller ADP1851/ ADP1853 Supervisory and Sequencing –1.5 V @ 25 mA ADM13307 Triple Reset Generator –15 V 1.2 V @ 200 mA ADP220/ ADP221 Dual LDO +15 V 2.5 V +15 V ADM7172 VIO ADP2114/ ADP5023 1.2 V Microprocessor iCoupler ADC VCORE RST –15 V Amp VREF 3.3 V ADM6305 1 V @ 200 mA Low Noise LDO +5 V ADM7160 ADP5135 3.3 V @ 1.2 A 2.5 V @ 1.8 A 1.8 V @ 1 A –15 V Triple 1.8 A Buck Regulator 3 4 High Performance Power Management Products Power for Analog Leveraging 50 Years of Experience Powering Analog Systems Sensors Amp ADC Amp Clock Clock Isolation Isolation Reference Reference RF Power for Analog Low Noise/High PSRR LDOs and Switches DAC Processors FPGAs RF Power for Analog Low Noise/High PSRR LDOs and Switches Analog Systems Digital Systems AMP and SAR ADC ADP5050/ADP5052 12 V Input 4 A Buck Regulator ADM7160 LDO 5 VIN ADP7118 LDO ADP5070/ ADP5071 –15 VOUT Amp/ Filter –16.5 V ADP7182 LDO 1.0 V @ 4 A VCORE VDDIO 1.5 V @ 1.2 A –15 V –16.5 V 4 A Buck Regulator Dual FETs –15 VOUT –15 V REF 1.2 A Buck Regulator 1.8V ADC 200 mA LDO 1.8 V @ 1.2 A ADP1741 VDD_1V3 VDD_Interface 3.3 V @ 0.2 A VDD_GPO ADP150 –15 V 1.2 A Buck Regulator Power Solution Highlights DDR3 PWRGD –15 V Digital Baseband 4.5 V @ 1.2 A Power Solution Highlights XX ADP5070/ADP5071—low noise, bipolar switching power supply XX ADP5050—5 V/12 V quad buck in tiny LFCSP package XX ADP7182—negative LDO with 54 dB PSRR, 9 μV rms noise XX ADP1741—low VIN LDO with 54dB PSRR, 23 μV rms noise XX ADP7118—20 V, 68 dB PSRR, 11 μV rms noise XX ADP150—50 dB PSRR, 9 μV rms noise LDO AD9361/AD9364 RF Transceiver TCXO PA Visit analog.com/power RF DAC System High Speed ADC +6 VIN ADM7150 LDO ADM7150 LDO +5.0 V PLL ADF4355-2 12 V Input ADP2386 1.7 V Buck Regulator ADP1740 1.3 V: AVDD1 LDO ADP1740 1.3 V: DRVDD1 1.3 V: DVDD1 LDO +1.8 V ADP2386 Buck Regulator AD9129 RF DAC 3.6 V ADM7171 ADM7170 ADP125 −6 V 2.5 V: DVDDIO LDO ADP7182 −VE LDO 12-Bit, 2.5 GSPS/2.0 GSPS, 1.3 V/2.5 V Analog-to-Digital Converter 2.5 V: DRVDD2 2.5 V: DVDD2 LDO −1.5 V ADM660 INV CP AD9625 2.5 V: AVDD2 LDO ADP125 2.5 V: SPI_DVDDIO LDO Power Solution Highlights Power Solution Highlights XX ADM7150—94 dB PSRR, 1 μV rms noise, ultralow noise LDO XX ADM7170—fast transient, 5 μV rms noise LDO XX ADP7182—negative LDO with 54 dB PSRR, 9 μV rms noise XX ADP1740—low VIN , 54 dB PSRR, 23 μV rms noise LDO XX ADM660—compact inverting charge pump XX ADP2386—high efficiency, compact 6 A buck regulator Battery-Powered Sensor Isolated ADC/Amp/Ref ADP5300 3-Coil Transformer Switching Battery Disconnect +7 V ADP7118 LDO +5 V +24 V ADP7142 LDO +18 V OR ADP165 Linear ADM8615 Voltage Supervisor ADM7160 +2.5 V LDO REF WDI Reset +24 VIN ADP1621 +18 V +18 V +2.5 V Amp/ Filter ADC Sensor ADCMP380 Comparator Interrupt DAC Micro –20 V Power Solution Highlights ADP7182 LDO Power Solution Highlights XX ADP165—ultralow quiescent current LDO XX ADP7118—20 V, low noise, 200 mA LDO XX ADM8615—ultralow POR with watchdog XX ADP7142—40 V, low noise, 200 mA LDO XX ADCMP380—ultralow power voltage comparator with reference XX ADM7160—3 V/5 V, low noise, 200 mA LDO XX ADP5300—ultralow power buck regulator XX ADP7182—negative LDO with 54 dB, 9 μV rms noise –18 V –18 V –18 V 5 6 High Performance Power Management Products The Fastest and Most Accurate Voltage Regulator Design and Optimization Tool ADIsimPower Voltage Regulator Design Tool Benefits Simple and Intuitive Interface XX Expert voltage regulator design help available 24/7 XX No level of expertise necessary to get a working solution XX Over 20 different tools XX Fast execution and custom designs every time XX Over 300 ADI parts covered XX Easy relative comparison: cost, efficiency, size, parts count, features, topology XX 99% of single and dual rail voltage regulator parts are supported XX Well characterized components in parts database from leading manufacturers XX Nine topologies supported: linear, buck (single and dual phase), boost, buck-boost, SEPIC, Cuk, SEPIC-Cuk, and inverting buck-boost XX Blank evaluation boards can be requested directly from the download tool XX Reliable, accurate results Start using ADIsimPower™ today at www.analog.com/ADIsimPower. From Design to Simulation in Three Easy Steps Step 1 ADIsimPower Selector Step 2 Design and Optimize: ADIsimPower Designer XX Smart selector XX Full design capability in minutes XX Bill of material XX Best part and topology identification XX No need to read a data sheet XX Detailed performance data XX Over 300 parts covered XX Real components behavior XX Free prototyping board available XX 10 different topologies XX Full schematics Visit analog.com/power Step 3 Simulation: ADIsimPE XX Simulate directly from ADIsimPower. XX The ADIsimPower design tools preconfigure the simulator for fast and easy simulation. Simply select export and run model. No expertise required. XX ADIsimPE™ powered by SIMetrix/SIMPLIS is a personal edition circuit simulator ideally suited to evaluate Analog Devices linear and mixed-signal components. ADIsimPE includes: XX Extensive library of ADI IC models and applications schematics XX Full schematics capture and editing capabilities with easy waveform viewing and analysis XX SPICE mode SIMetrix simulator ideal for op amps, references, linear regulators, and more XX SIMPLIS mode simulation optimized for switching power supplies, PLLs, and more XX Integration capability with ADIsimPower design tools For help using this application, please use the help menu or our EngineerZone® forum at https://ez.analog.com/community/power/ADIsimPE. Library content and instructional materials are available at www.analog.com/ADIsimPE. + = A Powerful Tool Set 7 8 High Performance Power Management Products VIN range (V Min to V Max) VOUT Range (V) IOUT (mA) Supply Current No Load (μA) Worst-Case Accuracy (±%) RMS Noise @ 10 Hz –100 KHz (μV rms) PSRR @ 100 KHz (dB) PSRR @ 1 MHz (dB) PSRR @ Headroom (mV) ADP1761 New 1.1 to 2.0 0.5 to 1.5 1000 4500 +1.5/–1.8 12 51 41 200 ADP1762 New 1.1 to 2.0 0.5 to 1.5 2000 4500 +1.5/–1.8 12 46 39 300 ADP1763 New 1.1 to 2.0 0.5 to 1.5 3000 4500 +1.5/–1.8 12 43 37 40 ADP7156 New 2.3 to 5.5 1.2 to 3.3 1200 4000 1.5 1.6 85 60 700 ADP7157 New 2.3 to 5.5 1.2 to 3.3 1200 4000 1.5 1.6 80 60 700 ADP7158 New 2.3 to 5.5 1.2 to 3.3 2000 4000 1.5 1.6 70 50 800 ADP7159 New 2.3 to 5.5 1.2 to 3.3 2000 4000 1.5 1.6 68 45 500 ADP7185 New –2.0 to –5.5 –0.5 to –4.5 –500 –650 1.5 9 50 35 1000 ADP7183 New –2.0 to –5.5 –0.5 to –4.5 –300 –650 1.5 9 60 45 1000 Part Number Comments Price ($U.S.) Power good, soft start — Power good, soft start — Power good, soft start — 3 mm × 3 mm, 10-lead LFCSP, 8-lead SOIC 3 mm × 3 mm, 10-lead LFCSP, 8-lead SOIC 3 mm × 3 mm, 10-lead LFCSP, 8-lead SOIC 3 mm × 3 mm, 10-lead LFCSP, 8-lead SOIC 1.7 nV/√Hz from 10 kHz to 1 MHz — 1.7 nV/√Hz from 10 kHz to 1 MHz — 1.7 nV/√Hz from 10 kHz to 1 MHz — 1.7 nV/√Hz from 10 kHz to 1 MHz — 2 mm × 2 mm, 8-lead LFCSP 2 mm × 2 mm, 8-lead LFCSP Positive/negative EN logic Positive/negative EN logic Package Ultralow VIN 3 mm × 3 mm, 16-lead LFCSP 3 mm × 3 mm, 16-lead LFCSP 3 mm × 3 mm, 16-lead LFCSP Ultralow Noise Negative LDOs — — Visit analog.com/power Low Dropout Regulators (LDOs) ADI offers a wide variety of low dropout (LDO) regulators providing clean power to high performance analog loads. ADI regulators offer low output noise, high power supply rejection, high accuracy, fast transient response, low dropout for increased efficiency, small package footprint, and features such as thermal overload protection, safety current limits, reverse protection, and shutdown mode to drastically reduce energy consumption. Ultralow Noise, Fast Transient Response LDOs ADI offers fixed and adjustable LDO output voltages from –27 V to +40 V with up to 2.0 A of output current. Analog Devices Introduces the World’s Lowest Noise LDO The ADM7154/ADM7155 are ultralow noise LDO (low dropout) regulators for RF (radio frequency) signal devices. The ADM7154/ADM7155 operate from 2.3 V to 5.5 V, provide up to 600 mA of output current, and support output voltages from 1.2 V to 3.3 V. The LDOs achieve an output NSD (noise spectral density) of 1.5 nV/√Hz above 100 kHz, which significantly reduces VCO (voltage controlled oscillator) phase noise in point-to-point microwave radios, satellite communications, defense electronics, and other wideband applications. Applications Features ADM7170/ADM7171/ADM7172 500 mA to 2 A LDOs Features XX Input voltage range: 2.3 V to 6.5 V XX Any fixed voltage part can be adjusted up to give a higher output voltage XX Max current rating: VIN range: 2.3 V to 5.5 V XX Regulated power noise sensitive applications Fixed/adjustable output voltage range: 1.2 V to 3.3 V XX RF mixers, phase-locked loops (PLLs) XX IOUT max: 600 mA XX Voltage controlled oscillators (VCOs) • ADM7170: 500 mA XX Low noise (CBYP = 1 μF) XX PLLs with integrated VCOs • ADM7171: 1 A • 0.9 μV rms total integrated noise from 100 Hz to 100 kHz XX Communications and infrastructure Power supply rejection ratio (PSRR): XX Cable digital-to-analog converter (DAC) drivers • 90 dB from 1 kHz to 100 kHz XX XX XX XX • ADM7172: 2 A XX Backhaul and microwave links XX Fast transient response: <1.5 μs for 1 mA to 1.5 A load step • VIN = 3.8 V, VOUT = 3.3 V @ 600 mA XX High PSRR: >65 dB at 10 kHz; 60 dB at 100 kHz 8-lead LFCSP and 8-lead SOIC packages XX Low dropout voltage of 84 mV at 1 A load, VOUT = 3 V • 58 dB at 1 MHz Noise Spectral Density (nV/√Hz) 10k 1k 100 Run 0 Noise Floor 1.0 µF 3.3 µF 10 µF 33 µF 100 µF 330 µF 1000 µF 1 −40 10 TRIG’D 1 µF 10 µF 100 µF 1000 µF −20 PSRR (dB) XX Very low noise: 5 μV rms independent of VOUT • BW = 100 Hz to 100 kHz, no bypass cap required −60 −80 CH1 PK∙PK 1.096 A 2 −100 1 −120 0.1 0.1 1 10 100 1k Frequency (Hz) ADM7154 noise spectral density. 10k 100k 1M −140 1 10 100 1k 10k 100k 1M 10M Frequency (Hz) ADM7154 PSRR vs. frequency, VOUT = 3.3 V, 400 mA load, 500 mV headroom. CH1 1.00 AΩ CH2 50.0 mV M400 ns A CH1 T 13.60% 620 mA ADM7171 full load transient response from 1 mA to 1 A for VOUT = 3.3 V. 9 10 High Performance Power Management Products LDO Selection Table VOUT Range (V) IOUT (mA) Supply Current No Load (μA) Worst-Case Accuracy (±%) RMS Noise @ 10 Hz to 100 kHz (μV rms) PSRR @ 100 kHz (dB) PSRR @ 1 MHz (dB) PSRR @ Headroom (mV)1 Package Comments Ultralow Noise, High PSRR ADM7150 4.5 to 16 ADM7151 4.5 to 16 ADM7154 2.3 to 5.5 ADM7155 2.3 to 5.5 1.5 to 5.0 1.5 to 5.1 1.2 to 3.3 1.2 to 3.3 800 800 600 600 4300 4300 4000 4000 2 2 2 2 1.6 1.6 1.6 1.6 90 90 90 90 55 55 58 58 1200 1200 500 500 3 mm × 3 mm, 8-lead LFCSP 3 mm × 3 mm, 8-lead LFCSP 3 mm × 3 mm, 8-lead LFCSP 3 mm × 3 mm, 8-lead LFCSP ADP7156 New 2.3 to 5.5 1.2 to 3.3 1200 4000 1.5 1.6 85 60 700 3 mm × 3 mm, 10-lead LFCSP, 8-lead SOIC ADP7157 New 2.3 to 5.5 1.2 to 3.3 1200 4000 1.5 1.6 80 60 700 3 mm × 3 mm, 10-lead LFCSP, 8-lead SOIC ADP7158 New 2.3 to 5.5 1.2 to 3.3 2000 4000 1.5 1.6 70 50 800 3 mm × 3 mm, 10-lead LFCSP, 8-lead SOIC ADP7159 New 2.3 to 5.5 1.2 to 3.3 2000 4000 1.5 1.6 68 45 500 3 mm × 3 mm, 10-lead LFCSP, 8-lead SOIC HMC976 3.3 to 5.5 HMC860 3.35 to 5.6 HMC1060 3.35 to 5.6 Low Voltage and Low Noise 1.8 to 5.1 2.5 to 5.2 1.8 to 5.2 400 240 500 1100 1900 2100 2 2 2 9 5.5 9 45 65 72 35 60 35 500 500 500 3 mm × 3 mm, 16-lead LFCSP 3 mm × 3 mm, 16-lead LFCSP 3 mm × 3 mm, 16-lead LFCSP 1.5 nV/√Hz @ 100 kHz 1.5 nV/√Hz @ 100 kHz 1.2 nV/√Hz @ 100 kHz 1.2 nV/√Hz @ 100 kHz 1.7 nV/√Hz from 10 kHz to 1 MHz 1.7 nV/√Hz from 10 kHz to 1 MHz 1.7 nV/√Hz from 10 kHz to 1 MHz 1.7 nV/√Hz from 10 kHz to 1 MHz 3 nV/√Hz @ 100 kHz Quad output Quad output ADP150 2.2 to 5.5 1.8 to 3.3 150 10 2.5 9 50 30 500 4-lead WLCSP, 5-lead TSOT ADP151 2.2 to 5.5 1.1 to 3.3 200 10 3 9 45 25 500 ADM7160 2.2 to 5.5 1.1 to 3.3 200 10 3 9 45 38 500 ADM7170 2.3 to 6.5 ADM7171 2.3 to 6.5 ADM7172 2.3 to 6.5 High Voltage and Low Noise 1.2 to 6.4 1.2 to 6.4 1.2 to 6.3 500 1000 2000 700 700 700 1.25 1.5 1.5 6 6 6 53 53 53 30 30 30 500 500 500 ADP7102 3.3 to 20 1.22 to 19 300 400 3 15 60 40 1000 ADP7104 3.3 to 20 1.22 to 19 500 400 3 15 60 40 1000 ADP7105 3.3 to 20 1.22 to 19 500 400 2 15 60 40 1000 ADP7112 2.7 to 20 1.2 to 19 200 50 1.8 11 68 50 2000 ADP7118 2.7 to 20 1.2 to 19 200 50 1.8 11 68 50 2000 ADP7142 2.7 to 40 1.2 to 39 200 50 1.8 11 68 50 2000 Part Number VIN Range (V Min to V Max) 4-lead WLCSP, 5-lead TSOT, 2 mm × 2 mm, 6-lead LFCSP 5-lead TSOT, 2 mm × 2 mm, 6-lead LFCSP 3 mm × 3 mm, 8-lead LFCSP 3 mm × 3 mm, 8-lead LFCSP 3 mm × 3 mm, 8-lead LFCSP 3 mm × 3 mm, 8-lead LFCSP, 8-lead SOIC 3 mm × 3 mm, 8-lead LFCSP, 8-lead SOIC 3 mm × 3 mm, 8-lead LFCSP, 8-lead SOIC 1 mm × 1.2 mm, 6-ball WLCSP 2 mm × 2 mm, 6-lead LFCSP, 8-lead SOIC, 5-lead TSOT 2 mm × 2 mm, 6-lead LFCSP, 8-lead SOIC, 5-lead TSOT 0.8 mm × 0.8 mm WLCSP option 0.8 mm × 0.8 mm WLCSP option I&I applications, low tempco Fast transient response Fast transient response Fast transient response Price ($U.S.) 3.64 3.64 2.14 2.14 — — — — — — — 0.31 0.34 0.44 0.88 1.19 1.79 Power good, reverse voltage protected Power good, reverse voltage protected Power good, soft start, reverse voltage protected Soft start 0.53 Soft start 0.96 Soft start 1.10 1.34 1.67 1.43 Visit analog.com/power VIN Range (V Min to V Max) VOUT Range (V) IOUT (mA) Supply Current No Load (μA) Worst-Case Accuracy (±%) RMS Noise @ 10 Hz to 100 kHz (μV rms) PSRR @ 100 kHz (dB) PSRR @ 1 MHz (dB) PSRR @ Headroom (mV)1 Package Comments Price ($U.S.) ADP7182 –2.7 to –28 –1.22 to –27 –200 –33 3 18 45 32 1000 2 mm × 2 mm, 6-lead LFCSP, 3 mm × 3 mm, 8-lead LFCSP, 5-lead TSOT Positive/negative EN logic 1.29 ADP7185 New –2.0 to –5.5 –0.5 to –4.5 –500 –650 1.5 8 60 45 1000 2 mm × 2 mm, 8-lead LFCSP ADP7183 New –2.0 to –5.5 –0.5 to –4.5 –300 –650 1.5 8 60 45 1000 2 mm × 2 mm, 8-lead LFCSP Part Number Negative Voltage Ultralow VIN ADP170 ADP171 1.6 to 3.6 1.6 to 3.6 0.8 to 3.0 0.8 to 3.0 300 300 23 23 3 3 30 30 50 50 32 32 500 500 5-lead TSOT 5-lead TSOT ADP172 1.6 to 3.6 0.8 to 3.0 300 23 3 30 50 32 500 4-lead WLCSP ADP130 ADP1761 New ADP1762 New 1.2 to 3.6 1.1 to 2.0 1.1 to 2.0 0.8 to 3.0 0.5 to 1.5 0.5 to 1.5 350 1000 2000 25 4500 4500 3 +1.5/–1.8 +1.5/–1.8 29 12 12 55 51 46 35 41 39 500 200 300 ADP1763 New 1.1 to 2.0 0.5 to 1.5 3000 4500 +1.5/–1.8 12 43 37 ADP1740 1.6 to 3.6 0.75 to 2.5 2000 90 2 23 54 ADP1741 1.6 to 3.6 0.75 to 3.3 2000 90 2 23 ADP1752 1.6 to 3.6 0.75 to 2.5 800 90 2 ADP1753 1.6 to 3.6 0.75 to 3.3 800 90 ADP1754 1.6 to 3.6 0.75 to 2.5 1200 ADP1755 1.6 to 3.6 0.75 to 3.3 1200 Positive/negative EN logic Positive/negative EN logic — — 0.33 0.33 5-lead TSOT 3 mm × 3 mm, 16-lead LFCSP 3 mm × 3 mm, 16-lead LFCSP Fixed output Adjustable output 0.95 mm × 0.95 mm WLCSP option VBIAS voltage required Power good, soft start Power good, soft start 400 3 mm × 3 mm, 16-lead LFCSP Power good, soft start — 40 1000 4 mm × 4 mm, 16-lead LFCSP 54 40 1000 4 mm × 4 mm, 16-lead LFCSP 23 54 40 1000 4 mm × 4 mm, 16-lead LFCSP 2 23 54 40 1000 4 mm × 4 mm, 16-lead LFCSP 90 2 23 54 40 1000 4 mm × 4 mm, 16-lead LFCSP 90 2 23 54 40 1000 4 mm × 4 mm, 16-lead LFCSP Soft start, power good, reverse voltage protected Soft start, power good, reverse voltage protected Soft start, power good, reverse voltage protected Soft start, power good, reverse voltage protected Soft start, power good, reverse voltage protected Soft start, power good, reverse voltage protected 0.33 0.33 — — 1.20 1.20 0.90 0.90 0.95 0.95 11 12 High Performance Power Management Products VIN Range (V Min to V Max) VOUT Range (V) IOUT Supply Current (mA) No Load (μA) Worst-Case Accuracy (±%) RMS Noise @ 10 Hz to 100 kHz (μV rms) PSRR @ 100 kHz (dB) PSRR @ 1 MHz (dB) PSRR @ Headroom (mV)1 Package Comments Multirail HMC860LP3E HMC1060LP3E ADP220 3.35 to 5.6 3.35 to 5.6 2.5 to 5.5 2.5 to 5.2 1.8 to 5.2 0.8 to 3.3 240 500 200 1900 2100 60 2 2 2 5.5 9 27 65 72 60 60 35 40 500 500 1000 3 mm × 3 mm, 16-lead LFCSP 3 mm × 3 mm, 16-lead LFCSP 6-lead WLCSP — — 0.58 200 60 2 27 60 40 1000 6-lead WLCSP 0.8 to 3.3 300 65 2 27 60 40 1000 2 mm × 2 mm, 8-lead LFCSP 2.5 to 5.5 0.5 to 5.0 300 65 2 27 60 40 1000 2 mm × 2 mm, 8-lead LFCSP ADP224 2.5 to 5.5 0.8 to 3.3 300 65 2 27 60 40 1000 2 mm × 2 mm, 8-lead LFCSP ADP225 2.5 to 5.5 0.5 to 5.0 300 65 2 27 60 40 1000 2 mm × 2 mm, 8-lead LFCSP ADP320 1.8 to 5.5 0.8 to 3.3 200 85 2 24 55 45 1000 3 mm × 3 mm, 16-lead LFCSP ADP322 1.8 to 5.5 0.8 to 3.3 200 85 2 24 55 45 1000 3 mm × 3 mm, 16-lead LFCSP ADP323 1.8 to 5.5 0.5 to 5.0 200 85 2 24 55 45 1000 3 mm × 3 mm, 16-lead LFCSP Quad output Quad output 1 mm × 1.5 mm WLCSP 1 mm × 1.5 mm WLCSP, active pulldown Dual LDO, fixed outputs Dual LDO, adjustable outputs Dual LDO, fixed outputs, quick output discharge Dual LDO, adjustable outputs, quick output discharge Triple LDO, 2.5 VBIAS min Triple LDO, 2.5 VBIAS min, fixed outputs Triple LDO, 2.5 VBIAS min, adjustable outputs ADP221 2.5 to 5.5 0.8 to 3.3 ADP222 2.5 to 5.5 ADP223 High Current ADP1762 New 1.1 to 2.0 0.5 to 1.5 2000 4500 +1.5/–1.8 12 46 39 300 3 mm × 3 mm, 16-lead LFCSP Power good, soft start — ADP1763 New 1.1 to 2.0 0.5 to 1.5 3000 4500 +1.5/–1.8 12 43 37 400 3 mm × 3 mm, 16-lead LFCSP Power good, soft start — ADM7172 2.3 to 6.5 1.2 to 6.3 2000 700 1.5 6 53 30 500 2.3 to 5.5 1.2 to 3.3 2000 4000 1.5 1.6 70 50 800 ADP7159 New 2.3 to 5.5 1.2 to 3.3 2000 4000 1.5 1.6 68 45 500 ADP1740 1.6 to 3.6 2000 90 2 23 54 40 1000 4 mm × 4 mm, 16-lead LFCSP ADP1741 1.6 to 3.6 2000 90 2 23 54 40 1000 4 mm × 4 mm, 16-lead LFCSP Fast transient response 1.7 nV/√Hz from 10 kHz to 1 MHz 1.7 nV/√Hz from 10 kHz to 1 MHz Soft start, power good, reverse voltage protected Soft start, power good, reverse voltage protected 1.79 ADP7158 New 3 mm × 3 mm, 8-lead LFCSP 3 mm × 3 mm, 10-lead LFCSP, 8-lead SOIC 3 mm × 3 mm, 10-lead LFCSP, 8-lead SOIC 5-lead TSOT, 4-lead WLCSP Part Number 0.75 to 2.5 0.75 to 3.3 Price ($U.S.) 0.58 0.49 0.49 0.49 0.49 0.54 0.54 0.54 — — 1.20 1.20 General-Purpose ADP121 2.3 to 5.5 1.2 to 3.3 150 11 3 40 50 30 1000 ADP122 2.3 to 5.5 1.75 to 3.3 300 45 2 25 60 38 500 ADP123 2.3 to 5.5 0.8 to 5.0 300 45 2 25 60 38 500 1 PSRR specifications are at this headroom voltage (headroom = VIN – VOUT ). 5-lead TSOT, 2 mm × 2 mm, 6-lead LFCSP 5-lead TSOT, 2 mm × 2 mm, 6-lead LFCSP 0.82 mm × 0.82 mm WLCSP 0.27 Fixed output 0.34 Adjustable output 0.34 VIN Range (V Min to V Max) General-Purpose (continued) Part Number 1 Visit analog.com/power VOUT Range (V) IOUT (mA) Supply Current No Load (μA) Worst-Case Accuracy (±%) RMS Noise @ 10 Hz to 100 kHz (μV rms) PSRR @ 100 kHz (dB) PSRR @ 1 MHz (dB) PSRR @ Headroom (mV)1 Package Comments 8-lead MSOP, 2 mm × 2 mm, 8-lead LFCSP 8-lead MSOP, 2 mm × 2 mm, 8-lead LFCSP Exposed pad package for high thermal conductivity Exposed pad package for high thermal conductivity Ultralow IQ, QOD Ultralow IQ Ultralow IQ, QOD, 0.965 mm × 0.965 mm WLCSP Ultralow IQ ADP124 2.3 to 5.5 1.75 to 3.3 500 45 2 25 45 33 500 ADP125 2.3 to 5.5 0.8 to 5.0 500 45 2 25 45 33 500 Ultralow IQ and Low Noise ADP160 2.2 to 5.5 ADP161 2.2 to 5.5 1.2 to 4.2 1.0 to 4.2 150 150 0.56 0.56 3.5 3.5 80 80 23 23 20 20 500 500 5-lead TSOT, 4-lead WLCSP 5-lead TSOT ADP162 2.2 to 5.5 1.2 to 4.2 150 0.56 3.5 80 23 20 500 5-lead TSOT, 4-lead WLCSP ADP163 2.2 to 5.5 1.0 to 4.2 150 0.56 3.5 80 23 20 500 ADP165 2.2 to 5.5 1.0 to 4.2 150 0.59 3.5 80 23 20 500 ADP166 2.2 to 5.5 1.0 to 4.2 150 0.59 3.5 80 23 20 500 5-lead TSOT 1 mm × 1 mm, 4-lead WLCSP, 2 mm × 2 mm, 6-lead LFCSP, 5-lead TSOT 1 mm × 1 mm, 4-lead WLCSP, 2 mm × 2 mm, 6-lead LFCSP, 5-lead TSOT WLCSP ADP121 2.3 to 5.5 1.2 to 3.3 150 11 3 40 50 30 1000 5-lead TSOT, 4-lead WLCSP ADP150 2.2 to 5.5 1.8 to 3.3 150 10 2.5 9 50 30 500 4-lead WLCSP, 5-lead TSOT ADP151 2.2 to 5.5 1.1 to 3.3 200 10 3 9 45 25 500 4-lead WLCSP, 5-lead TSOT, 2 mm × 2 mm, 6-lead LFCSP ADP160 2.2 to 5.5 1.2 to 4.2 150 0.56 3.5 80 23 20 500 5-lead TSOT, 4-lead WLCSP ADP162 2.2 to 5.5 1.2 to 4.2 150 0.56 3.5 80 23 20 500 5-lead TSOT, 4-lead WLCSP ADP165 2.2 to 5.5 1.0 to 4.2 150 0.59 3.5 80 23 20 500 ADP166 2.2 to 5.5 1.0 to 4.2 150 0.59 3.5 80 23 20 500 ADP172 1.6 to 3.6 0.8 to 3.0 300 23 3 30 50 32 500 4-lead WLCSP ADP220 2.5 to 5.5 0.8 to 3.3 200 60 2 27 60 40 1000 6-lead WLCSP ADP221 2.5 to 5.5 0.8 to 3.3 200 60 2 27 60 40 1000 6-lead WLCSP ADP7112 2.7 to 20 1.2 to 19 200 50 2 11 60 40 1000 6-lead WLCSP PSRR specifications are at this headroom voltage (headroom = VIN – VOUT ). 1 mm × 1 mm, 4-lead WLCSP, 2 mm × 2 mm, 6-lead LFCSP, 5-lead TSOT 1 mm × 1 mm, 4-lead WLCSP, 2 mm × 2 mm, 6-lead LFCSP, 5-lead TSOT Price ($U.S.) 0.42 0.42 0.34 0.34 0.34 0.34 Ultralow IQ in dropout (pass through mode), QOD 0.35 Ultralow IQ in dropout (pass through mode) 0.35 0.82 mm × 0.82 mm WLCSP 0.8 mm × 0.8 mm WLCSP option 0.8 mm × 0.8 mm WLCSP option 0.27 Ultralow IQ, QOD Ultralow IQ, QOD, 0.965 mm × 0.965 mm WLCSP 0.34 0.31 0.34 0.34 Ultralow IQ in dropout (pass through mode), QOD 0.35 Ultralow IQ in dropout (pass through mode) 0.35 0.95 mm × 0.95 mm WLCSP option 1 mm × 1.5 mm WLCSP 1 mm × 1.5 mm WLCSP, active pulldown Soft start 0.33 0.58 0.58 0.53 13 14 High Performance Power Management Products Switching Controllers Switching Controllers That Deliver Highly Efficient and Easy to Use Solutions Analog Devices offers a range of versatile, single and dual synchronous switching controllers with external MOSFETs to provide efficient power conversion from a wide input voltage range to output voltages as low as 0.6 V. ADI makes power management design simple by providing easy to use ADIsimPower design software to provide schematics and BOM with a few easy steps. This, added to industry-leading applications support and 50 years of experience in high performance signal processing, makes ADI a reliable and efficient supplier of power management products. ADI has a very broad range of switching controllers to deliver high current to your point of load. The ADP187x series of wide range input voltage, constant-on-time controllers offers fast transient response with a variety of features depending on the family member selected. The ADP1851 and ADP1853 are wide range input, single-channel, constant frequency controllers. Both devices can be configured as voltage or current mode controllers and can be synchronized to an external clock and provide tracking capability for easy system power-up. The ADP1853 offers the added feature of master clock output. For higher power levels, the ADP1850 is a flexible, dual-channel or interleaved, current mode controller that offers synchronization, tracking, and simple sequencing capability useful for systems with multiple voltage rails on a card. Similarly, the ADP1829 offers a dual output, voltage mode controller with synchronization and tracking. ADP1850 demo board 12 VIN to 0.9 V @ 50 A output. VIN RRAMP1 VIN = 2.95 V to 20 V RC VREG VOUT RTOP RBOT CVREG2 CVREG RRES ADP1874/ ADP1875 CC2 10 kΩ RAMP COMP CIN BST EN DRVH FB SW GND CBST PGOOD SS VREG_IN RES TRACK PGND Q1 L VCCO VOUT COUT Q2 RPGD RTRK2 RTRK1 M2 RCSG HI LO FREQ SS VMASTER R11 M2 DL1 AGND FREQ RAMP2 RRAMP2 COMP COMP2 PGOOD ADP1853: single phase, constant frequency, single output controller. Selectable current or voltage mode with sync, clockout, tracking, and power saving mode. VIN M3 COMP1 CLKOUT R12 RCSG1 PGND1 FB SS1 SS2 L1 VOUT1 SW1 ILIM1 FB1 PGOOD1 PGOOD2 SYNC AGND ADP1874/ADP1875: single phase, constant-on-time, single output controllers with tracking and optional power saving mode. M1 DH1 BST1 PGND HI LO CSS VCCO TRK1 TRK2 VOUT DL Sync VEXT L SW CS ILIM ADP1853 Load M1 DH BST TRK DRVL VREG EN1 EN2 VDL VIN EN VIN ADP1850 VMA VIN CC RAMP1 VIN RRAMP DH2 BST2 L2 SW2 ILIM2 FB2 R21 VOUT2 M4 DL2 R22 RCSG2 PGND2 ADP1850: configured as an interleaved, single output controller with sync, tracking, and power saving mode. Visit analog.com/power Single Output Switching Controllers Part Number VIN Range (V) Switching Frequency VOUT Options Architecture Topology Supply Current Max (Typ) Enable Power Good ADP1621 2.9 to 5.5 100 kHz to 1.5 MHz Adj Constant frequency, current mode Step-up 1.8 mA • ADP1821 3.7 to 5.5 300 kHz to 600 kHz, sync to 1 MHz Adj Constant frequency, voltage mode Step-down 1 mA • • ADP1822 3.7 to 5.5 300 kHz to 600 kHz, sync to 1 MHz Adj Constant frequency, voltage mode Step-down 1 mA • • ADP1828 3.0 to 20 300 kHz to 600 kHz, sync to 1 MHz Adj Constant frequency, voltage mode Step-down 1.5 mA • • ADP1864 3.15 to 14 580 kHz Adj Constant frequency, current mode Step-down 235 μA ADP1870/ ADP1871 2.95 to 20 300 kHz, 600 kHz, 1 MHz Adj Constant on time, current mode Step-down 1.1 mA • ADP1872/ ADP1873 2.75 to 20 300 kHz, 600 kHz, 1 MHz Adj Constant on time, current mode Step-down 1.1 mA • ADP1874/ ADP1875 2.95 to 20 300 kHz, 600 kHz, 1 MHz Adj Constant on time, current mode Step-down 1.1 mA • • ADP1878/ ADP1879 2.95 to 20 300 kHz, 600 kHz, 1 MHz Adj Constant on time, current mode Step-down 1.1 mA • • ADP1851/ ADP1853 2.75 to 20 200 kHz to 1.5 MHz Adj Constant frequency, current/voltage mode Step-down 2.5 mA • • ADP1972/ ADP1974 6 to 60 50 kHz to 300 KHz Adj Constant frequency, voltage mode Step-up, step-down 1.5 mA • Package Comment/Added Features Price ($U.S.) 10-lead MSOP — 1.32 • 16-lead QSOP — 1.41 • Sync 24-lead QSOP Margining capability 1.46 • Sync/ clockout 20-lead QSOP, 20-lead LFCSP — 1.52 6-lead TSOT Nonsynchronous buck; pin-to-pin compatible with LTC1772, LTC3801 1.06 • (ADP1871) 10-lead MSOP, 10-lead LFCSP — 1.08 • (ADP1873) 10-lead MSOP Independent bias supply reduces internal dissipation 1.03 • (ADP1875) 16-lead QSOP — 1.32 • (ADP1879) 14-lead LFCSP Low thermal impedance package 1.28 Sync/ clockout 20-lead LFCSP Configurable as voltage or current mode controller 1.20 Sync/ clockout 16-lead TSSOP Companion to AD8450 for battery systems 3.50/4.20 Tracking • • Power Saving Option • Sync/ Clockout Dual Output and Interleaved Controllers Part Number VIN Range (V) Switching Frequency VOUT Options Architecture Topology Supply Current Max (Typ) Enable Power Good Tracking Power Saving Option Sync/ Clockout Package Comment/Added Features Price ($U.S.) ADP1850 2.75 to 20 200 kHz to 1.5 MHz Dual adj Constant frequency, current mode Step-down 4.5 mA • • • • Sync 32-lead LFCSP Configurable as interleaved, single output or dual output 1.85 ADP1829 3.0 to 20 300 kHz to 600 kHz, sync to 1 MHz Dual adj Constant frequency, voltage mode Step-down 1.5 mA • • • 32-lead LFCSP Configurable as dual output device 2.13 ADP1876 2.95 to 20 600 kHz Dual adj Constant frequency, current mode Step-down 4.5 mA • • • 32-lead LFCSP Additional 1.5 VOUT, 150 mA LDO 1.89 15 16 High Performance Power Management Products Switching Regulators ADI provides a wide range of switching regulators with integrated FETs for step-up (boost), invert, and step-down (buck) applications with fixed and adjustable output voltage options. This highly integrated, versatile family of products is intended to minimize external components for space challenged applications. The switching regulator devices combine with Analog Devices online ADIsim design tools to offer extremely easy to use solutions. ADP2384/ADP2386 20 V, 4 A/6 A Switching Regulator XX XX XX XX Ultralow IQ ~14 μA Required only three external component for smallest solution size ~53 mm2 Quick output discharge (ADP2371) XX XX XX XX Optional light load efficiency mode Frequency synchronization Ideal solution for multicell battery source XX ADP2323: dual 3 A or single 6 A ADP2325: dual 5 A or single 10 A Programmable switching frequency Optional light load efficiency Ideal solution for 12 V and 5 V input in multirail configuration RTOP1 RT CVREG VREG GND FB 1.2 MHz 600 kHz COMP PGND SS RC CSS RBOT CC On 1 FSEL 2 EN Off SYNC 3 4 8 ADP2370/ ADP2371 7 6 5 PGND CINT SW PG VOUT = 3.3 V COUT 10 µF CDRV FB INTVCC Mode SCFG TRK2 TRK1 VDRV ROSC RTOP2 L1 M1 ADP2323/ ADP2325 CC2 VOUT1 COUT1 PGND DL2 RC2 RBOT2 CBST1 SW1 DL1 GND PGOOD2 PGOOD1 SYNC RT BST1 VIN COUT CIN1 BST2 RTOP SYNC Power Good VOUT PGOOD RT CIN 10 µF L EN1 CBST PVIN1 EN ADP2384/ ADP2386 SW PVIN2 BST PVIN CIN VIN CSS1 RC1 SS1 VIN CC1 RBOT1 VIN = 6 V EN2 XX XX SS2 XX XX COMP1 XX Best-in-class efficiency: >95% Accurate current limit allows the use of smaller inductor Power good and precision enable pin for simplified sequencing Adjustable frequency and frequency sync to avoid interference in multirail applications Ideal solution for 12 V and 5 V input rail FB1 XX ADP2323/ADP2325 20 V, Dual 3 A/5 A Regulator COMP2 XX ADP2370/ADP2371 15 V, 800 mA Switching Regulator FB2 COUT2 M2 SW2 CBST2 L2 VIN CSS2 CIN2 VOUT2 Visit analog.com/power Step-Down (Buck) Low IQ IOUT Max (A) Typical IQ (μA) Switching Frequency (MHz) Very High Switching Frequency (≥3 MHz), Ultralow IQ  , and Smallest Solution Size ADP2121 2.3 to 5.5 1.80, 1.82, 1.85, 1.875 0.5 36 6 ADP2108 2.3 to 5.5 1.0, 1.1, 1.2, 1.3, 1.5, 1.8, 1.82, 2.3, 2.5, 3.0, 3.3 0.6 19 3 ADP2109 2.3 to 5.5 1.0, 1.2, 1.5, 1.8 19 ADP2140 2.3 to 5.5 Buck: 1.2 to 3.3, LDO: 1.2 to 3.3 0.6 Buck: 0.6, LDO: 0.3 0.8 0.8 0.8 Part Number VIN Range (V) VOUT Options (V) ADP2138 2.3 to 5.5 0.8, 1.0, 1.2, 1.5, 1.8, 2.5, 2.8, 3.0, 3.3 ADP2139 2.3 to 5.5 0.8, 1.0, 1.2, 1.5, 1.8, 2.5, 2.8, 3.0, 3.3 ADP2147 2.3 to 5.5 0.9/1.3, 1.2/1.0, 0.9/1.1, 1.275/0.981 Extended Input Range, Ultralow IQ  , and Small Solution Size ADP2370 3.2 to 15 1.2, 1.5, 1.8, 2.5, 3.0, 3.3, 5.0, adj (0.8 to VIN ) ADP2371 3.2 to 15 1.2, 1.8, 3.3, adj (0.8 to VIN ) Ultralow IQ and Small Solution Size ADP2105 2.7 to 5.5 1.2, 1.5, 1.8, 3.3, adj (0.8 to VIN ) ADP2106 2.7 to 5.5 1.2, 1.5, 1.8, 3.3, adj (0.8 to VIN ) ADP2107 2.7 to 5.5 1.2, 1.5, 1.8, 3.3, adj (0.8 to VIN ) Ultralow IQ, Dual-Channel Regulators ADP2230 1.2, 1.8, 1.2, 3.3, 1.8, 3.3, adj (0.8 to 6) 2.3 to 6.5 Package Price ($U.S.) Additional Features 3 6-ball WLFCSP 5-ball WLFCSP, 5-lead TSOT 5-ball WFCSP 0.80 Quick output discharge 0.70 42 3 10-lead LFCSP Independent enable or auto sequencing 1.20 24 24 23 3 3 3 6-ball WLFCSP 6-ball WLFCSP 6-ball WLFCSP Quick output discharge Simple dynamic voltage scaling 0.90 0.90 0.90 0.8 0.8 14 14 0.6/1.2 0.6/1.2 8-lead LFCSP 8-lead LFCSP Quick output discharge 1.40 1.40 1 1.5 2 20 20 20 1.2 1.2 1.2 16-lead LFCSP 16-lead LFCSP 16-lead LFCSP 0.8 15 2 10-lead WLFCSP 0.60 1.13 1.25 1.32 Internal compensation, quick output discharge, synchronization 1.53 Invert Part Number ADP5073 New ADP5074 New VIN Range (V) VOUT Options (V) Switch Current Max (A) Switching Frequency (MHz) Package Price ($U.S.) 2.85 to 15 2.85 to 15 Adj (−0.5 to −39 below VIN) Adj (−0.5 to −39 below VIN) 1.2 2.4 1.2/2.4 1.2/2.4 16-lead LFCSP 16-lead LFCSP 1.49 1.75 Step-Up or Down (Buck-Boost) Part Number ADP2503 ADP2504 VIN Range (V) VOUT Options (V) IOUT Max (A) Typical IQ (μA) 2.3 to 5.5 2.3 to 5.5 2.8, 3.3, 3.5, 4.2, 4.5, 5.0, adj (2.6 to 5.5) 2.8, 3.3, 3.5, 4.2, 4.5, 5.0, adj (2.6 to 5.5) 0.6 1 38 38 Switching Frequency (MHz) 2.5 2.5 Package Price ($U.S.) 10-lead LFCSP 10-lead LFCSP 1.30 1.30 17 18 High Performance Power Management Products Step-Up (Boost) VOUT Options (V) 3.3, 5.0, 12.0 Adj (VIN to 20) Adj (VIN to 20) Adj (VIN to 20) Fixed 1.8 Adj (1.8 to 3.3) Adj (VIN to 39) Adj (VIN to 39) ADP5073/ADP5074 Inverting Switching Regulator XX XX XX XX XX Wide input voltage range: 4.5 V to 36 V Very low minimum-on-time: ~50 ns Best-in-class efficiency: >95% ADP2441: voltage tracking and adjustable soft start ADP2442: optional light load efficiency mode and frequency synchronization Ideal solution for 24 V and 12 V input rail C3 AVIN PVIN 12 VIN FB CIN On Off RC CC CVREG VREF ADP5073/ ADP5074 EN SS SW PWRGD COMP Slew VREG Sync GND RFT CVREF D1 COUT RBOTTOM RCOMP CCOMP Package 8-lead PDIP, 8-lead SOIC 8-lead MSOP 8-lead MSOP 10-lead LFCSP 6-lead LFCSP 6-lead LFCSP 20-lead LFCSP 20-lead LFCSP FB COMP ADP2441 EN RFREQ VIN VIN 100 90 SW CIN PGND COUT VOUT = 5 V VOUT = 12 V 80 70 60 VOUT = 3.3 V 50 40 20 VOUT Price ($U.S.) 2.06 0.78 0.70 0.95 1.14 1.14 2.19 2.39 ADP2441 Ultrahigh Efficiency Conversion 30 RTOP –5OUT CBST C4 VOUT BST XX XX VCC XX XX SS/TRK XX VIN: 2.85 V to 15 V VOUT adjustable negative output to VIN –39 V Integrated 1.2 A/2.4 A main switch Power-good output Resistor programmable soft start timer Slew rate control for lower system noise AGND XX Switching Frequency 70 kHz 650 kHz or 1.3 MHz 650 kHz or 1.3 MHz 650 kHz or 1.3 MHz 2 MHz 2 MHz 1.2 MHz or 2.4 MHz 1.2 MHz or 2.4 MHz ADP2441/ADP2442 36 V, 1 A Switching Regulator FREQ XX Switch Current Max (A) 1.5 1.4 2 4 1 1 1 2 Efficiency (%) VIN Range (V) 2 to 30 1.8 to 5.5 2.5 to 5.5 2.5 to 5.5 0.8 to VOUT 0.8 to VOUT 2.85 to 15 2.85 to 15 Part Number ADP1111 ADP1612 ADP1613 ADP1614 ADP1606 New ADP1607 New ADP5070 New ADP5071 New PGOOD VIN = 24 V FSW = 300 kHz Coilcraft MSS1038 10 0 0.01 0.1 Load (A) Efficiency vs. load current for VIN = 24 V. 1 Visit analog.com/power Step-Down (Buck) Part Number VIN Range (V) VOUT Options (V) IOUT Max (A) Fully Integrated FET, High Performance, and Ease of Use 1.0, 1.2, 1.5, 1.8, 2.5, 3.3, adj ADP2120 2.3 to 5.5 1.25 (0.6 to VIN ) 1.0, 1.2, 1.5, 1.8, 2.5, 3.3, adj ADP2119 2.3 to 5.5 2 (0.6 to VIN  ) 1.0, 1.2, 1.5, 1.8, 2.5, 3.3, adj ADP2118 2.3 to 5.5 3 (0.6 to VIN  ) 1.0, 1.2, 1.5, 1.8, 2.5, 3.3, adj ADP2164 2.7 to 6.5 4 (0.6 to VIN ) 1.0, 1.2, 1.5, 1.8, 2.5, 3.3, adj ADP2165 New 2.7 to 5.5 5 (0.6 to 0.9 × VIN ) 1.0, 1.2, 1.5, 1.8, 2.5, 3.3, adj ADP2166 New 2.7 to 5.5 6 (0.6 to 0.9 × VIN ) ADP2384 4.5 to 20 Adj (0.6 to 0.9 × VIN) 4 ADP2386 4.5 to 20 Adj (0.6 to 0.9 × VIN ) 6 ADP2387 New 4.5 to 20 Adj (0.6 to 0.9 × VIN) 6 ADP2389/ADP2390 New 4.5 to 18 Adj (0.6 to 0.9 × VIN) 12 ADP2441 4.5 to 36 Adj (0.6 to 0.9 × VIN ) 1 ADP2442 4.5 to 36 Adj (0.6 to 0.9 × VIN ) 1 Dual Output, High Performance, and Highly Configurable 0.8, 1.2, 1.5, 1.8, 2.5, 3.3, 2 (dual), ADP2114 2.75 to 5.5 adj (0.6 to VIN ) 4 (single) 0.8, 1.2, 1.5, 1.8, 2.5, 3.3, 3 (dual), ADP2116 2.75 to 5.5 adj (0.6 to VIN ) 6 (single) 1 (dual), ADP2311 4.5 to 18 Adj (0.6 on both channels) 1 (single) 3 (dual), ADP2323 4.5 to 20 Adj (0.6 to 0.9 × VIN ) 6 (single) 5 (dual), ADP2325 4.5 to 20 Adj (0.6 to 0.9 × VIN ) 10 (single) General-Purpose, Leaded Package, and Ease of Use ADP2300 3 to 20 Adj (0.8 to 0.85 × VIN ) 1.2 ADP2301 3 to 20 Adj (0.8 to 0.85 × VIN ) 1.2 2.5, 3.3, 5.0, adj ADP2302 3 to 20 2 (0.8 to 0.85 × VIN ) 2.5, 3.3, 5.0, adj ADP2303 3 to 20 3 (0.8 to 0.85 × VIN ) ADP2381 4.5 to 20 Adj (0.6 to 0.9 × VIN ) 6 ADP3050 3.6 to 30 3.3, 5.0, adj (1.2 to 0.9 × VIN ) 1 Switching Frequency (MHz) Power Good Power Saving Mode Precision Enable Voltage Tracking Frequency Sync Precharged Output 100% Duty Operation 1.2 • • • • • • 1.2 • • • • • 0.6/1.2 • • • • 0.6/1.2/adj (0.5 to 1.4) • • Adj (0.25 to 1.4) • Adj (0.25 to 1.4) Package Price ($U.S.) • 10-lead LFCSP 0.94 • • 10-lead LFCSP 1.14 • • • 16-lead LFCSP 1.43 • • • • 16-lead LFCSP 1.66 • • • • • 24-lead LFCSP 1.73 • • • • • • 24-lead LFCSP 1.90 Adj (0.2 to 1.4) Adj (0.2 to 1.4) Adj (0.2 to 1.4) Adj (0.2 to 2.2) Adj (0.3 to 1) Adj (0.3 to 1) • • • • • • • • • (ADP2390) • • • • • • • • • • • • • • • • • • • • 24-lead LFCSP 1.74 24-lead LFCSP 2.04 24-lead LFCSP 2.04 32-lead LFCSP 2.96/3.07 12-lead LFCSP 1.78 12-lead LFCSP 1.83 0.3/0.6/1.2 • • • • • • • 32-lead LFCSP 1.88 0.3/0.6/1.2 • • • • • • • 32-lead LFCSP 2.50 0.3 • 24-lead LFCSP 2.38 Adj (0.25 to 1.2) • • • • • • • 32-lead LFCSP 2.26 Adj (0.25 to 1.2) • • • • • • • 32-lead LFCSP 2.71 • • • • 6-lead TSOT 6-lead TSOT 1.02 1.02 0.7 1.4 • • Adj Soft Start • 0.7 • • • 8-lead SOIC 1.12 0.7 • • • 8-lead SOIC 1.24 Adj (0.2 to 1.4) 0.2 • 16-lead TSSOP 8-lead SOIC 1.68 1.81 • • • • 19 20 High Performance Power Management Products Integrated Power Management Solutions (Micro-PMUs) New Multioutput Regulators Enable Smaller More Reliable Power Solutions for RF/High Speed and Precision Analog Products Along with FPGAs/Processors Modern high performance RF/high speed and precision analog products along with FPGAs/processor-based systems require an increasing number of dedicated rails supplying core, I/O, memory, and precision analog voltage rails both positive and negative. Typically, power solutions today make use of standalone switching regulators and LDOs, but board area is shrinking, complicating the task of designing more efficient power management systems. Combining multiple switching regulators and LDOs into a single package enables very small, flexible, highly efficient power management solutions for powering high performance analog and FPGAs/processors with the highest system reliability. ADP5054 Powering Xilinx UltraScale FPGAs 5 V/12 V ADP5054 5 V/12 V 6 A Buck VCCINT 6 A Buck ADP5054 6 A Buck 6 A Buck 2.5 A Buck VCCAUX 2.5 A Buck VCCO_1V2 ADP5054 ADP5070 Powering Bipolar ADC, DAC, Amp, and Mux 2.5 A Buck 2.5 A Buck Xilinx® UltraScale™ Kintex/Virtex 6 A Buck VCCO_1V5 6 A Buck MGTAVCC ADP5070 MGTAVTT Inverting Regulator 2.5 A Buck VCCO_3V3 1.8 V 1.5 V Xilinx®/Altera® FPGA 3.3 V +15 V Boost Regulator 2.5 A Buck 1.0 V ADC Amp/ Filter Analog Input Switch/Mux –15 V Visit analog.com/power Integrated Power Management Solutions (Micro-PMUs) Part Number ADP5022 ADP5023 ADP5024 Product Description Dual, 3 MHz buck with 150 mA LDO Dual, 800 mA buck with 300 mA LDO Dual, 1.2 A buck with 300 mA LDO VIN (V) Buck: 2.3 to 5.5 LDO: 1.7 to 5.5 Buck: 2.3 to 5.5 LDO: 1.7 to 5.5 Buck: 2.3 to 5.5 LDO: 1.7 to 5.5 Buck: 2.3 to 5.5 ADP5033 Dual, 3 MHz buck  regulator with dual LDO LDO: 1.7 to 5.5 Dual, 3 MHz buck regulator with dual LDO Buck: 2.3 to 5.5 LDO: 1.7 to 5.5 ADP5133 New Dual, 3 MHz buck regulator Buck: 2.3 to 5.5 ADP5134 New Dual, 3 MHz buck regulator with dual LDO ADP5034 ADP5135 New ADP5037 ADP5040 Triple, 3 MHz buck regulator Dual, 3 MHz, 800 mA buck regulator with dual 300 mA LDO 3 MHz buck regulator  with dual LDO Buck: 2.5 to 5.5 LDO: 1.7 to 5.5 Buck: 3.0 to 5.5 Buck: 2.3 to 5.5 LDO: 1.7 to 5.5 Buck: 2.3 to 5.5 LDO: 1.7 to 5.5 VOUT (V) Buck: 3.3, 3.0, 2.8, 2.5, 2.3, 2.0, 1.82, 1.8, 1.6, 1.5, 1.3, 1.2, 1.1, 1.0, 0.9, 0.8 LDO: 3.3, 3.0, 2.9, 2.8, 2.775, 2.5, 2.0, 1.875, 1.8, 1.75, 1.7, 1.65, 1.6, 1.55, 1.5, 1.2 Adj (0.8 to 3.8) Number of Outputs Output Current (mA) 2 × buck 600 1 × LDO 150 2 × buck 800 Adj (0.8 to 5.2) 1 × LDO 300 Adj (0.8 to 3.8) 2 × buck 1200 Adj (0.8 to 5.2) Buck: 3.3, 3.0, 2.8, 2.5, 2.3, 2.0, 1.8, 1.6, 1.5, 1.4, 1.3, 1.2, 1.1, 1.0, 0.9 LDO: 3.3, 3.0, 2.8, 2.5, 2.25, 2.0, 1.8, 1.7, 1.6, 1.5, 1.2, 1.1, 1.0, 0.9, 0.8 1 × LDO 300 2 × buck 800 2 × LDO 300 Adj (0.8 to 3.8) 2 × buck 1200 Adj (0.8 to 5.2) 2 × LDO 300 Adj (0.8 to 3.8) or 3.3, 3.0, 2.8, 2.5, 2.3, 2.0, 1.8, 1.6, 1.5, 1.4, 1.3, 1.2, 1.1, 1.0, 0.9 2 × buck 800 Adj (0.8 to 3.8) 2 × buck 1200 Adj (0.8 to 5.2) 2 × LDO 300 Adj (0.8 to 3.8) 3 × buck 1800 Adj (0.8 to 3.8) 2 × buck 800 Adj (0.8 to 5.2) 2 × LDO 300 Adj (0.8 to 3.8) 1 × buck 1200 Adj (0.8 to 5.2) 2 × LDO 300 Min Reset Typ Watchdog Timeout Timeout (ms) (ms) I2C Reset Trip Threshold (V) — — — — — — — Key Features Package Price ($U.S.) — Mode pin, individual  enable pins 16-ball WLCSP 1.80 — — Mode pin, individual enable pins 24-lead LFCSP 1.59 — — — Mode pin, individual enable pins 24-lead LFCSP 1.79 — — — Mode pin, two enable pins 16-ball WLCSP 1.90 24-lead LFCSP, 28-lead TSSOP 1.99 — — — — Mode pin, individual enable pins — — — — Adjustable and fixed outputs 16-ball WLCSP 1.29 — — — — Precision enable pins and power-good pin 24-lead LFCSP 2.09 — — — — Precision enable pins and power-good pins 24-lead LFCSP 1.69 — — — — Mode pin, individual enable pins 24-lead LFCSP 1.69 — — — — Individual enable pins, mode pin 20-lead LFCSP 1.39 21 22 High Performance Power Management Products Integrated Power Management Solutions (Micro-PMUs) continued Part Number ADP5041 Product Description VIN (V) VOUT (V) Number of Outputs 3 MHz buck regulator with dual LDO, supervisor, and watchdog timer Buck: 2.3 to 5.5 Adj (0.8 to 3.8) 1 × buck 1200 LDO: 1.7 to 5.5 Adj (0.8 to 5.2) 2 × LDO 300 Boost: VIN to 39 1 × boost Inverter: –0.5 to –39 below VIN 1 × inverter Boost: VIN to 39 1 × boost Input current limit: boost: 1 A inverter: 0.6 A Input current limit: boost: 2 A inverter: 1.2 A ADP5070 New Dual dc-to-dc with boost and inverter outputs for generating VPOS and VNEG Boost/inverter: 2.85 to 15 ADP5071 New Dual dc-to-dc with boost and inverter outputs for generating VPOS and VNEG Boost/inverter: 2.85 to 15 Inverter: –0.5 to –39 below VIN 1 × inverter ADP5073 New Inverting switching regulator for generating VNEG Inverter: 2.85 to 15 Inverter: –0.5 to –39 below VIN 1 × inverter ADP5074 New Inverting switching regulator for generating VNEG Inverter: 2.85 to 15 Inverter: –0.5 to –39 below VIN ADP5075 New Inverting switching regulator for generating VNEG Inverter: 2.85 to 15 Inverter: –0.5 to –39 below VIN ADP5050 New Quad buck regulator with LDO with I2C Buck: 4.5 to 15 0.8 to 0.85 × VIN LDO: 1.7 to 5.5 0.5 to 4.75 Buck: 4.5 to 15 0.8 to 0.85 × VIN Buck: 4.5 to 15 0.8 to 0.85 × VIN LDO: 1.7 to 5.5 0.5 to 4.75 ADP5051 New Quad buck regulator, POR, and WDI with I2C ADP5052 New Quad buck regulator with LDO Output Current (mA) 2 IC Reset Trip Threshold (V) Min Reset Typ Watchdog Timeout Timeout (ms) (ms) — 0.5 (adj) 20, 140 Key Features Package Price ($U.S.) 102, 1600 Individual enable pins and supervisor, WDI, mode pin, and MR pin 20-lead LFCSP 1.79 — — — — Individual enable pin, adjustable outputs, soft start, and slew rate — — — — Individual enable pin, adjustable outputs, soft start, and slew rate Inverter: 1.2 A — — — — Enable pin, adjustable output, soft start, and slew rate 1 × inverter Inverter: 2.4 A — — — — 1 × inverter Inverter: 0.6 A — — — — 2 × buck 2 × buck 1 × LDO 2 × buck 40001 1200 200 40001 Yes — — — Yes 0.5 (adj) 1, 20, 140, 1120 — — — 2 × buck 1200 2 × buck 2 × buck 1 × LDO 2 × buck 40001 1200 200 40001 2 × buck 1200 20-lead LFCSP, 20-lead TSSOP 20-lead LFCSP, 20-lead TSSOP 2.19 2.39 16-lead LFCSP 1.49 16-lead LFCSP 1.79 12-ball WLCSP 0.99 I2C interface with individual enable pins and power good 48-lead LFCSP 4.39 6.3, 102, 1600, 25,600 I2C interface with individual enable pins and power good 48-lead LFCSP 4.59 — — Individual enable pins with power good 48-lead LFCSP 3.59 0.5 (adj) 1, 20, 140, 1120 6.3, 102, 1600, 25,600 Individual enable pins with power good 48-lead LFCSP 3.79 Enable pin, adjustable output, soft start, and slew rate Enable pin, adjustable output, soft start, and slew rate ADP5053 New Quad buck regulator with POR and WDI Buck: 4.5 to 15 0.8 to 0.85 × VIN ADP5054 New Quad buck regulator Buck: 4.5 to 15.5 0.8 to 0.85 × VIN 2 × buck 2 × buck 60002 2500 — — — — Individual enable pins with power good 48-lead LFCSP 4.29 ADP2311 New Dual 1 A buck 4.5 to 18 Adj (0.6 to 0.85 × VIN) 2 × buck 1000 — 0.95 × VFB Adj 50, 100, 150, 200 PFO, PFI, WDI 24-lead LFCSP 2.38 1 Resistor programmable current limit (4 A, 2.5 A, or 1.2 A). 2 Resistor programmable current limit (6 A, 4 A, or 2 A). Visit analog.com/power Ultralow Power Microenergy Harvesters Analog Devices offers ultralow power boost regulators for photovoltaic and thermoelectric energy harvesting systems. The ADP5090 delivers efficient conversion of the harvester’s limited power down to the 15 μW to 1 mW range by offering best-in-class sub-μW power conversion losses. The ADP5090’s programmable maximum power point tracking feature ensures that the most energy is extracted from the harvester and the 260 nA quiescent current deep sleep mode prolongs the system’s operational time by minimizing losses in the absence of ambient energy. The integrated charge pump circuit enables cold start down to 380 mV input voltage when no energy is present on the system node. ADP5090 Features Photovoltaic Cell/Solar Panel PGOOD 22 µF GaAs Thin Film Alta Devices 4.7 µF SYS SW VIN 4.7 µF Sensor 6.34 MΩ 14.7 MΩ 10 nF BAT MPPT CBP ADP5090 A-Silicon Sanyo REF BACK_UP DIS_SW Dye-Sensitized Solar Cell GCELL; ElectricFilm™ ADP160/ ADP161 Optional CR2032 3 V 225 mAh MINOP MCU (Always-On) PAS409HR 0.03 F 3.3 V 12 µAh SETSD SETPG 10 MΩ ADF70xx (Rx/Tx) TERM AGND PGND Thermoelectric Generator XX Ultralow power boost regulator XX Hysteretic controller optimizes sub-1 mW efficiency XX Cold start from 16 μW at VIN = 380 mV XX Ultralow quiescent current XX IQ (sys) = 320 nA when VIN (OCV) > MINI_OP XX IQ (sys) = 260 nA when VIN (OCV) < MINI_OP XX OCV (open circuit voltage) sensing maximum power point tracking XX Programmable MPPT ratio for PV or TEG XX Programmable automatic switcher shutdown point (MIN_OP) XX Energy storage management XX Programmable charging termination voltage and shutdown voltage level to prevent overcharging and overdischarging XX Support optional back-up battery power path (primary cell battery) XX RF transmission friendly XX Ability to shut down switcher temporarily via MCU communication PGOOD 22 µF SW VIN 4.7 µF 4.7 µF ADP160/ ADP161 Sensor 90 80 10 MΩ 10 MΩ 10 nF BAT MPPT PAS409HR 0.03 F 3.3 V 12 µAh ADP5090 DIS_SW OPTIONAL CR2032 3 V 225 mAh MINOP SETPG PGND 60 50 40 30 SETSD TERM AGND MCU (Always-On) REF BACK_UP Buck TEG Marlow ETEG HV56 70 CBP Efficiency Thin Film TEG Laird ETEG HV56 SYS ADF70xx (Rx/Tx) 20 ADP5090 COMP 2 COMP 1 10 0 0.01 0.1 Input Current (mA) 1 10 23 24 High Performance Power Management Products In addition to efficient ultralow power conversion, ADP5090 provides excellent system design flexibility. For example, built-in programmability enables the part to handle the charging of different types of energy storage mediums. If an optional backup cell battery is added to the system, ADP5090 will intelligently manage and prioritize the power path via fully integrated power switches. ADP5090 can transition to a quiet, no switching mode within 10 μs to reduce noise during RF transceiver data communication periods. Topology Quiescent Current (Standby Current) (nA) VIN Operating Range VIN Cold Startup VSYS < 1.8 V Max Input Current (mA) Termination Charging Voltage (V) Shutdown Discharging Voltage (V) Accuracy over Temperature Cell Type Package Price1 ($U.S.) Switching/ boost 300 (CBP > MIN_OP) 260 (CBP < MIN_OP) 80 mV to 3.3 V 380 mV 100 mA 2.2 to 5.2 (Adj) 2.0 to VTERM (Adj) 3% SuperCap Li-Ion 3 mm × 3 mm 16-lead LFCSP 1.99 Part Number ADP5090 New 1 1000 to 4999. Ultralow Power Regulators Analog Devices has introduced a new ultralow power regulator, ADP5310, which consumes extremely low current during regulation and therefore generates superior efficiency, particularly in ultralight load (sub-1 mW) conditions, making it ideal for battery-powered applications in which the system is always on. Unlike switchers that employ traditional PSM (power saving mode) approaches, which still may consume tens of microamps of quiescent current, ADP5310 has a proprietary scheme that consumes only 600 nA IQ, enabling efficient conversion even for loads in the microamp range. Moreover, ADP5310 is equipped with selectable forced PWM mode, offering a low noise output to power sensitive RF and analog loads making ADP5310 ideal for powering systems that need a low IQ standby mode as well as a low noise active mode. ULP Micro-PMU for Smart Metering RF Module ULP Micro-PMU for Low Power DSP Companion Always-on Always-on From MCU To MCU EN1 SW1 PWRGD CH1 Buck Regulator 800 mA PVIN1 MAX: 15 V MIN: 2.7 V + PVIN2 1 µF – + 22 µF – From MCU Mode: High: Forced PWM Low: Forced Hysterectic PGND1 CH2 Ultralow PGND2 Power Buck Regulator FB2 50 mA/300 mA EN3 CH3 Load Switch VREG AGND 1 µF 4.7 µH 2.2 V to 2.8 V @ 400 mA 10 µF R1 FB1 SW2 MODE/ SYNC ADP5310 Hibernate ADP5310 4.7 µH R2 2.2 V to 2.8 V @ 2 µA VOUT Control (By DAC or Switch) MCI (Always-On) 10 µF From DSP Power Amplifier To DSP 1 µF ADF70xx (Rx/Tx) CH1 Buck Regulator Auto PSM/PWM 800 mA PWRGD PVIN2 + – + 22 µF From DSP 2.2 V to 2.8 V @ 15 mA SW1 PVIN1 MAX: 15 V MIN: 2.7 V – VOUT3 EN1 Mode: High: Forced PWM Low: Forced Hysterectic MODE Hibernate PGND1 CH2 Ultralow PGND2 Power Buck Regulator FB2 50 mA/500 mA CH3 Load Switch VREG AGND 1 µF VOUT3 1.1 V 10 µF R1 FB1 SW2 EN3 4.7 µH VOUT Control (By DAC or Switch) R2 4.7 µH 3.3 V 10 µF ADP160 1.8 V VDD_INT ADI Low Power DSP (Blackfin) VDD_EXT VDD_OTP VDD_HADC VDD_USB VDD_RTC VDD_DMC Part Number Topology Configuration Quiescent Current (Standby Current) (nA) VIN Operating Range (V) VOUT Programmable Range (V) Max Output Current (mA) Special Features Package Price1 ($U.S.) ADP5300 New Switching (buck) 1 × buck 230 nA (VIN = 4.2 V) 2.05 to 6.5 Adjustable via single resistor 0.8 to 5.0 (32 options) 500 Selectable hysteretic or FPWM mode, optional SYNC clocking, QOD, and voltage monitoring 10-lead LFCSP, 9-ball WLCSP 0.95 ADP5310 New Switching 2 × buck (buck) 1 × load switch 620 nA (VIN = 6.0 V) 690 nA (IIN = 15 V) 2.7 to 15.0 CH1: 1.2, 1.5, 1.8, 2.5, 2.85, 3.3, 5 or adjustable CH2: 1.2 to 5.0 (50 mV per step) or adjustable CH1: 800 CH2: 300 Selectable hysteretic or FPWM mode, optional SYNC clocking, and QOD 16-lead TSSOP-EP 1.99 1 × LDO 560 nA (IOUT = 0 μA) 2.2 to 5.5 Fixed option from 1.2 to 4.2 or adjustable 150 QOD option 1 × LDO 590 nA (IOUT = 0 μA) 2.2 to 5.5 Fixed option from 1.2 to 4.2 or adjustable 150 Pass through mode and QOD 1 × LDO 590 nA (IOUT = 0 μA) 2.2 to 5.5 Fixed option from 1.2 to 4.2 or adjustable 150 Pass through mode, no QOD ADP160/ADP161/ ADP162/ADP163 New ADP165 New ADP166 New 1 Visit analog.com/power Linear (LDO) Linear (LDO) Linear (LDO) 1000 to 4999 90 80 Efficiency 70 60 50 40 30 0 0.001 ADP5310 CH2 ADP2370 0.01 0.1 1 Output Current (mA) Efficiency VIN = 6 V, VOUT = 2.8 V. 10 100 5-lead TSOT, 4-ball WLCSP 6-lead TSOT, 6-lead LFCSP, 4-ball WLCSP 6-lead TSOT, 6-lead LFCSP, 4-ball WLCSP 0.34 0.35 0.35 25 26 High Performance Power Management Products Digital Power and Drivers Digital Power for Isolated Power Conversion Analog Devices leads the market in digital power controllers for ac-to-dc and isolated dc-to-dc power supply systems with award winning products and technology that enable customers to capitalize on the flexibility of digital technology without the pain of complex programming. All digital controllers are complemented by an easy to use graphics user interface (GUI) that enables fast system optimization of efficiency and performance and reduces time to market. The ADP1046A (W—automotive) is an advanced digital controller with seven PWM logic outputs and is suited to parallel and redundant power supply operation and offers current sharing functions and control of the external OR-FET for redundant power supply applications. The ADP1046A (W) can be used to drive the latest high efficiency LLC resonant mode architectures. ADP1050/ADP1051/ADP1052 are extremely compact digital controllers with 4 PWM/6 PWM logic outputs capable of controlling most high efficiency power supply topologies with synchronous rectification. All devices have an extensive PMBus™ command set with multiple energy saving modes. The ADP1051/ADP1052 are designed for parallel power supply connection with programmable passive current share, reverse current protection, precharge startup, and conditional overvoltage protection. The ADP1052 adds peak parameter measurements for system power mapping. The ADP1055 introduces high bandwidth, high switching frequency, and fast transient response to digital power control—approaching analog performance. The ADP1055 adds extensive access and password protection and advanced diagnostics capability, first fault instance detection and Blackbox capability. Intuitive graphic user programming eliminates complex coding and software qualification. All ADP104x/ADP105x advanced digital controllers are supported by evaluation kits and reference designs at: http://www.analog.com/en/power-management/digital-power-management/products/index.html. Part Number ADP1046A/ ADP1046AW Description Key Features Single-channel digital controller with LLC resonant LLC resonant mode control, current share, mode, current share, and FET- and OR-FET control voltage feedforward Oring control VIN (V) Interface EEPROM PWM Outputs Housekeeping I/O Protection Package Temperature Range (°C) Price @ 1k ($U.S.) 3.3 I2C Yes 7 ACSNS, FLAGIN, PGOOD1, PGOOD2, PSON OVP, UVP, OTP, OCP, ACSNS, GND continuity 24-lead QSOP –40 to +85 ambient 3.21 OVP, UVP, OCP, OTP (2) 40-lead LFCSP –40 to +125 junction 5.30 ADP1053 Configurable dual-channel digital controller Frequency synchronization, voltage feedforward 3.3 I2C/ PMBus Yes 8 ACSNS, PGOOD (2), PSON (2), FLAGIN, FLAGOUT, SYNC ADP1050 Single-channel digital controller with PMBus interface PMBus interface, synchronization, power saving modes 3.3 I2C/ PMBus Yes 4 ACSNS/VF, PGOOD/ALERT, control/enable, SYNC/ FLAGIN OVP, UVP, OCP, OTP 20-lead LFCSP –40 to +125 junction 3.40 ADP1051/ ADP1052 Single-channel digital controller with PMBus interface 3.3 I2C/ PMBus Yes 6 ACSNS/VF, PGOOD/ALERT, control/enable, SYNC/ FLAGIN Redundant OVP, UVP, OCP, OTP 24-lead LFCSP –40 to +125 junction 3.90/4.10 ADP1055 Advanced digital controller with PMBus interface with high switching frequency capability 3.3 I2C/ PMBus Yes 6+2 ACSNS/VF, PGOOD/ALERT, control/enable, SYNC/ FLAGIN, 4 × GPIO Redundant OVP, UVP, OCP, OTP 32-lead LFCSP –40 to +125 junction 4.60 PMBus interface, parallel configurable, synchronization, power saving, adaptive dead time; ADP1052: peak measurement capability PMBus interface, high bandwidth, fast transient capability, active clamp snubber, power saving modes and adaptive dead time, Blackbox diagnostics, and password protection Visit analog.com/power Digital Power Factor Correction (PFC) with Accurate Input Power Meter The ADP1047 and ADP1048 digital power factor correction controller series offers versatile controllers with power metering capability to ±1% accuracy. The ADP1047 is a single phase device, while the ADP1048 is an interleaved controller and can be configured as a bridgeless PFC for high system efficiency. The PMBus interface allows parameters to be adjusted and reported including accurate measurement of input voltage, current, and power. The ADP1047/ ADP1048 can be programmed using the easy to use graphic user interface, enabling ac-to-dc designers and system architects to optimize efficiency and power system performance. ADP1048 600 W interleaved PFC evaluation kit. 85 VAC to 265 VAC input to 385 VDC output. Digital Power Factor Correction Controllers with Accurate Power Metering Part Number Description Key Features VIN (V) Interface EEPROM PWM Outputs Housekeeping I/O ADP1047 Single phase PFC controller with accurate power metering Inrush control, real-time efficiency optimization, enhanced dynamic response, synchronization, spread spectrum 3.3 I2C/PMBus Yes 2 PSON, inrush control, ACOK, PGOOD ADP1048/ Interleaved PFC controller with ADP1048W accurate power metering Inrush control, real-time efficiency optimization, enhanced dynamic response, synchronization, spread spectrum 3.3 I2C/PMBus Yes 2 PSON, inrush control, ACOK, PGOOD Temperature Range (°C) Price @ 1k ($U.S.) Programmable ac fault detection, OCP, 24-lead QSOP OVP, OTP –40 to +85 ambient 3.00 Programmable ac fault detection, OCP, 24-lead QSOP OVP, OTP –40 to +85 ambient 3.60 Protection Package High Speed MOSFET Drivers The ADP3654/ADP3634/ADP3624/ADP3630 family of high current, dual, high speed drivers complements the ADI digital power controllers. This family uses an industry-standard driver footprint but adds switching performance and enhanced reliability. The ADP3634/ADP3624/ADP3630 driver family has two levels of thermal protection (overtemperature warning and shutdown), provides a precision enable that can be used to provide system protection and safety, and includes UVLO to protect the power FET from supply rail droop. The ADP3650 is introduced as a dual MOSFET driver suited to driving nonisolated point-of-load synchronous buck converters. High Speed Drivers Description VIN (V) Peak Drive Current (A) Propagation Delay Rising Typ (ns) UVLO_ON/OFF Threshold Typ (V) Precision Enable/ Shutdown OT Protection OT Warning Signal Package Ambient Temperature Range (°C) Price @ 1k ($U.S.) ADP3654 Dual noninverting 4.5 to 18 4 14 4.2, 3.9 No No No 8-lead MSOP_EP, 8-lead SOIC_N_EP –40 to +125 junction 0.74/0.66 ADP3633/ ADP3634/ ADP3635 Dual inverting (ADP3633), dual noninverting (ADP3634), inverting/ noninverting (ADP3635) 9.5 to 18 4 14 8.7, 7.7 Yes Yes Yes 8-lead MSOP_EP, 8-lead SOIC_N_EP –40 to +85 0.96/0.88 ADP3623/ ADP3624/ ADP3625 Dual inverting (ADP3623), dual noninverting (ADP3624), inverting/ noninverting (ADP3625) 4.5 to 18 4 14 4.2, 3.9 Yes Yes Yes 8-lead MSOP_EP, 8-lead SOIC_N_EP –40 to +85 0.96/0.88 ADP3629/ ADP3630/ ADP3631 Dual inverting (ADP3629), dual noninverting (ADP3630), inverting/ noninverting (ADP3631) 9.5 to 18 2 14 8.7, 7.7 Yes Yes Yes 8-lead MSOP, 8-lead SOIC_N –40 to +85 0.81/0.76 ADP3650 Buck sync rectifier 4.15 to 13.2 — 30 4.15, 3.0 Yes No No 8-lead LFCSP, 8-lead SOIC –40 to +85 0.70/ 0.62 Part Number 27 28 High Performance Power Management Products Hot Swap Hot Swap ICs with Precision ADCs Deliver Greater Accuracy for Improved Energy Savings With industry-leading power monitoring accuracy, hot swap controllers from ADI enable increased energy savings opportunities for communications infrastructure installations. Combined with FET health detection features they ensure a robust and dependable solution. Low Voltage Positive Hot Swap Controllers with Integrated Power Monitor Power Monitors –48 V Hot Swap Controllers with Integrated Power Monitor ±0.3% current monitoring accuracy FET health detection XX XX XX Constant power foldback for FET SOA protection Precision (<1.0%) current and voltage measurement XX Constant power foldback XX 25 mV/50 mV full-scale sense voltage XX e ffic V l O 48 tra ne – n Ce kpla c Ba Hot Swap Card +V Power Monitoring RDROP ADM1075 UVH UVL OV PMBus/ I2C Bus I2C interface XX Processor interrupt pin VIN 5V 3.3 V GND RSENSE CLOAD –48 V Power Monitor PMBus High Accuracy Linear Inrush Current Control Controller ADM1293 Watts VIN –48 V RTN 250 W ADM1278 Isolated DC-to-DC Converter XX UV SDA SCL µP ALERT CLRB Gate N-Channel Mosfet Sense+ GND Timer VEE Sense– RSENSE Energy Power Voltage Current Voltage Positive Hot Swap Part Number ADM4210 ADM1170 ADM1171 ADM1172 ADM1270 Input Range (V) 2.7 to 16.5 1.6 to 16.5 2.7 to 16.5 2.7 to 16.5 Circuit Breaker Sense Voltage (mV) 50 50 50 50 Input Control UV/enable UV/enable UV/enable UV/enable Digital Interface — — — — Current Sense Accuracy — — ±5 @ 50 mV (analog) — Other Features — SS SS, CSOUT PFI, PFO 4 to 60 50 UV/OV/enable — ±5 @ 50 mV (analog) Adj current limit, power good Package 6-lead TSOT 8-lead TSOT 8-lead TSOT 8-lead TSOT 16-lead LFPCP, 16-lead QSOP Price1 ($U.S.) 1.99 2.13 2.23 2.02 2.49 1000 to 4999 1 –48 V Hot Swap Controller Part Number ADM1070 ADM1073 ADM1075 New 1 1000 to 4999. Voltage Range (V) Shunt regulated Shunt regulated Undervoltage Detection/Overvoltage Detection UV pin, OV pin UV pin, OV pin Shunt regulated UVH pin, UVL pin, OV pin Digital V and I Readback — — PMBus interface with four addresses; also power readback Additional Features — Soft start, drain pin monitoring, additional I/Os Soft start, constant power foldback, fast gate shutdown, adj current sense limit Package 6-lead SOT-23 14-lead TSSOP 28-lead LFCSP, 28-lead TSSOP Price1 ($U.S.) 1.57 2.13 4.99 Visit analog.com/power Low Voltage Positive Hot Swap and Power Monitors Part Number ADM1175 ADM1176 ADM1177 ADM1178 Input Range (V) Circuit Breaker Sense Voltage (mV) 3.15 to 16.5 3.15 to 16.5 3.15 to 16.5 3.15 to 16.5 Input Control UV/ enable UV/ enable UV/ enable UV/ enable 100 100 100 100 ADM1275 2.95 to 20 5 to 25 UV/OV/ enable ADM1276 2.95 to 20 5 to 25 UV/OV/ enable ADM1278 New 2.0 to 20 UV/OV/ enable 5 to 25 Digital Interface VIN = 5 V Current Sense Accuracy Package CONV 10-lead MSOP 2.53 — 10-lead MSOP 2.53 SS 10-lead MSOP 2.53 — 10-lead MSOP 2.73 ±1.95 @ 100 mV ±1.95 @ 100 mV ±1.95 @ 100 mV ±1.95 @ 100 mV I2C with 4 addresses I2C with 16 addresses I2C with 4 addresses I2C with 4 addresses PMBus with 4 addresses, readback V, I PMBus with 4 addresses, readback V, I, P, E Other Features Price1 ($U.S.) ±1 @ 20 mV Foldback, GPO (×2) 5 mm × 5 mm, 20-lead LFCSP ±1 @ 20 mV Foldback, GPO (×2), PWRGD, energy meter 5 mm × 5 mm, 20-lead LFCSP 5.29 Power foldback, GPO PMBus with 4 (×2), FET fault, PWRGD, 5 mm × 5 mm, addresses, ±0.3 @ 20 mV startup limit, SPI, CSOUT, 32-lead LFCSP readback V, I, P, E, T temperature, energy meter 2.89 4.49 RSENSE 0.01 Ω Long VCC RON2 10 kΩ Part Number CM Range (V) Gain ADM4073T ADM4073F ADM4073H 2 to 28 2 to 28 2 to 28 20 50 100 GND RC 100 Ω CC 0.01 µF Timer Long GND GND Low voltage positive hot swap controller. SENSEP SENSEN ADM1293 VCC Internal Supply VIN Operating Range (V) Accuracy Typ ( %) Package Price ($U.S.) 3 to 28 3 to 28 3 to 28 1 1 1 6-lead SOT-23 6-lead SOT-23 6-lead SOT-23 0.99 0.99 0.99 Range Select Mux LDO VCAP ADC EN VAUX 1 Address Decoder GPO1/ALERT1/CONV PMBus and Logic GPO2/ALERT2 ADR1 ADR2 1 1000 to 4999. GND SCL SDAI SDAO Current sense amplifier. Digital Power Monitors Part Number Operating Range (V) Current Control Accuracy (∙%) Worst-Case Current Monitoring Accuracy (%) Bidirectional Current Monitoring ADC Conversion Input CONV CLR Input Alert Output Readback Type Peak Value Recording Energy Meter ADM1191 3.15 to 26 105 1.45 @ 75 mV — Yes — Yes V and I — — ADM1192 3.15 to 26 105 1.45 @ 75 mV — — Yes Yes V and I — — ADM1293A New 2.95 to 20 0.33 @ 20 mV Yes Yes — Yes V, I, P, E Yes Yes ADM1293B New 2.95 to 20 0.75 @ 20 mV Yes Yes — Yes V, I, P, E Yes Yes ADM1294A New 2.95 to shunt 0.33 @ 20 mV Yes Yes — Yes V, I, P, E Yes Yes ADM1294B New 2.95 to shunt 0.75 @ 20 mV Yes Yes — Yes V, I, P, E Yes Yes 1 1000 to 4999. CTIMER RG 100 Ω ADM4210 Current Sense Amplifiers—High Side ∙ Gate On CTIMER 0.22 µF 1 1000 to 4999. Max Sense Voltage (mV) 150 150 150 + CLOAD 470 µF Gate Drive/ Logic 1.3 V RON1 Short 20 kΩ Q1 VOUT = 5 V Sense ±25, ±50, ±100, ±200 ±25, ±50, ±100, ±200 ±25, ±50, ±100, ±200 ±25, ±50, ±100, ±200 Communications Interface I2C interface with 4 addresses I2C interface with 16 addresses PMBus interface with 16 addresses PMBus interface with 16 addresses PMBus interface with 16 addresses PMBus interface with 16 addresses Package Price1 ($U.S.) 10-lead MSSOP 1.92 10-lead MSSOP 1.92 16-lead, 4 mm × 4 mm LFCSP 16-lead, 4 mm × 4 mm LFCSP 16-lead, 4 mm × 4 mm LFCSP 16-lead, 4 mm × 4 mm LFCSP 4.19 2.79 4.49 2.99 29 30 High Performance Power Management Products Load Switches Controlling power supplies in today’s systems is becoming increasing complex, and ADI’s family of load switches provide a simple way to keep them all under control. ADP198 6 V, Reverse Protected Load Switch ADP1290 12 V, 2 A, Logic Controlled, High-Side Power Switch XX Low RDSON of 50 mΩ @ VIN = 3.3 V and ILOAD = 200 mA in WLCSP XX Low RDSON of 40 mΩ XX Wide input voltage range down to 1.65 V XX Wide input voltage range: 2.3 V to 13.2 V XX IGND = 2.5 μA with IOUT = 0 mA, VIN = 2.8 V XX 2 A continuous operating current, TJ < 85°C XX 5 μA reverse current, VOUT = 6.2 V XX 1.2 V logic compatible enable input XX Low shutdown current: 100 nA XX Low 12 μA quiescent current, VIN = 3.3 V XX Ultrasmall size WLCSP: 4 bump, 0.5 mm pitch XX Low 12 μA quiescent current, VIN = 3.3 V XX Compact 2 mm × 2 mm, 8-lead LFCSP XX Ultralow shutdown current: 2.0 μA at VIN = 6.5 V XX Programmable start-up time: 30 μs, 200 μs, 450 μs, 1000 μs XX Ultrasmall 1.0 mm × 1.5 mm, 6-ball, 0.5 mm pitch WLCSP ADP198 Reverse Polarity Protection VIN VIN VOUT + – VOUT + GND VIN VOUT EN Off SEL0 Slew Rate Control SEL1 Off On EN Load ADP1290 1 mm × 1 mm, 4-Ball WLCSP CIN 1 µf 2 mm × 2 mm, 8-Lead LFCSP 1.8 V 8 VIN VOUT 1 VOUT VIN VOUT 2 ADP198 EN GND 3 GND ADP198 SEL1 4 In 7 VIN 6 EN 5 SEL0 Reverse Current Block VIN Charge Pump Level Shift GND VIN On Out Load Visit analog.com/power Load Switches Part Number VIN Min (V) ID Max (A) ID Limit (A) Temperature Protect (°C) Switch RDSON ISUPPLY @ Shutdown Typ (μA) IGND (μA) Enable Logic (V) Output tON Delay (ms) Features Package Price1 ($U.S.) ADP1190A 1.4 to 3.6 500 — — 0.065 Ω @ 3.6 V 700 nA — 1.2 min — Quad switch 1.2 mm × 1.6 mm 0.60 0 to 5.5 3 — 125 0.01 Ω @ 1.8 to 5.5 V 0.25 40 1.2 min 2 0 V switch 1.0 mm × 1.5 mm 0.50 ADP196 1.8 to 5.5 3 4 125 0.01 Ω @ 1.8 to 5.5 V 0.25 40 1.2 to 6 2 — 1.0 mm × 1.5 mm 0.50 ADP196-22/ ADP196-23/ ADP196-32/ ADP196-33 1.8 to 5.5 3 4 125 0.01 Ω @ 1.8 to 5.5 V 0.25 40 1.2 to 6 2 Fault, EN, latch off, retry 1.0 mm × 1.5 mm 0.50 ADP1190 New 1.4 to 3.5 500 mA — — 0.120 Ω @ 1.8V 2 2 1.2 to 3.3 5 Quad switch 1.2 mm × 1.6 mm 0.60 ADP199 0.9 to 3.6 0.5 — — 0.04 Ω @ 1.1 to 3.6 V 0.9 6 1.1 to 3.6 0.02 — 0.8 mm × 0.8 mm 0.32 1.65 to 6.5 1 — — 0.120 Ω @ 1.8 V 1.1 2.5 1.2 to 6 0.11 Reverse current protection 1.0 mm × 1.0 mm 0.35 ADP194 1.1 to 3.6 500 mA — — 0.08 Ω @ 1.8 V 0.7 1 1.2 to 3.3 0.007 Reverse current protection 0.8 mm × 0.8 mm 0.32 ADP197 1.8 to 5.5 3 — 125 0.012 Ω @ 1.8 to 5.5 V 18 1 1.2 to 3.3 1 — 1.0 mm × 1.5 mm 0.46 ADP195 1.1 to 3.6 1.1 — — 0.095 Ω @ 1.8 V 5 10 1.2 to 3.3 0.005 — 1.0 mm × 1.0 mm 0.35 ADP191 1.1 to 3.6 500 mA — — 0.105 Ω @ 1.8 V 2 2 1.2 to 3.3 0.005 Active discharge 0.8 mm × 0.8 mm 0.32 ADP190 1.1 to 3.6 500 mA — — 0.105 Ω @ 1.8 V 2 2 1.2 to 3.3 0.005 — 0.8 mm × 0.8 mm 0.32 2.3 to 13.2 2 — — 0.04 Ω @ 2.3 V — — — — — 1.0 mm × 1.5 mm 0.88 ADP1196 New ADP198 New ADP1290 New 1000 to 4999. 1 31 32 High Performance Power Management Products Sequencing The number of supplies being used on today’s communications boards is expanding, making the the control and monitoring of these complex systems as simple as possible is what ADI sequencers do. Introducing the concept of the virtual sequencer—these devices can be tranparently cascaded in order to control up to 150 supplies. Simple Sequencer® XX Low cost solution XX Capacitor adjustable timeout XX Cascadable devices XX FET drive output (ADM6819 and ADM6820) XX XX Cascadable Super Sequencer ADM1260 XX Monitor and control up to 150 power rails XX Operates as one virtual sequencer ADM1260 ADM1260 3.3 V VCC VIN ADM1085 ENIN 22 V tolerant outputs IN ADP2107 ENOUT EN 12 V IN 12 V OUT 5 V IN 5 V OUT 3 V IN 3 V OUT ADM1166 1.8 V OUT Mux CEXT GND Tiny SC70 package 12-Bit ADC SMBus Interface, Control Logic, and EEPROM Nonvolatile Fault Recording 5 V OUT 3 V OUT Multivoltage Sequencers XX ±0.8% threshold accuracy XX Up and down sequencing XX Cascadable devices (sequence 3 rails to 12 rails) XX Capacitor adjustable timeout XX Output valid at 1 V min XX 3.3 V 2.5 V OUT IN ADP2107 EN OUT 1.2 V OUT 5V Sequencing Engine Outputs Power On FPGA ADP1706 EN VIN1 ADM1184/ ADM1185 PWRGD VIN2 Reset OUT 6 × 8-Bit DACs 2.5 V Super Sequencer® XX VIN3 VIN4 2.5 V OUT IN DC-to-DC EN OUT 1.8 V OUT EN IN LDO OUT 3.3 V OUT IN VCC OUT1 OUT2 OUT3 IN DC-to-DC EN OUT 1.2 V OUT IN ADP1821 MSOP and QSOP packages 3.3 V OUT 0.9 V OUT 3.3 V EN Inputs 1.8 V OUT 1.8 V IN DC-to-DC EN OUT 3.3 V OUT 3.3 V OUT 5V GND Monitor and Control up to 150 Power Supplies Programmable sequencing engine XX ±1% threshold accuracy XX Closed-loop margining XX Up and down sequencing XX Nonvolatile fault recording XX Enable and FET drive output XX LFCSP and TQFP packages IN EN OUT DC-to-DC Trim 0.9 V OUT Power Good Signal Valid System Reset 1.2 V OUT Visit analog.com/power Analog Sequencers ADM1186 Power-Up and Power-Down Timing Diagram Part Number Number of Supplies Monitored Voltage Monitoring Accuracy (±%) ADM1085 ADM1086 ADM1087 ADM1184 ADM1185 ADM1186-1 ADM1186-2 ADM6819 ADM6820 1: cascadable 1: cascadable 1: cascadable 4: cascadable 4: cascadable 4: cascadable 4 2: cascadable 2: cascadable 7 8 8 0.8 0.8 0.8 0.8 2.6 2.6 Number of Output Drivers 1 1 1 4 4 4 4 1 1 FET Drive/ Enable Output Enable Enable Enable Enable Enable Enable Enable FET drive FET drive Sequencing Package Price ($U.S.) Up Up Up Up Up Up and down Up and down Up Up 6-lead SC70 6-lead SC70 6-lead SC70 10-lead MSOP 10-lead MSOP 20-lead QSOP 16-lead QSOP 6-lead SOT-23 6-lead SOT-23 0.34 0.34 0.34 1.79 1.21 1.99 1.49 1.21 1.21 2.5 V Number of Supplies Monitored Voltage Monitoring Accuracy (±%) Number of Output Drivers Programming Method ADM1060 7 2.5 9 SMBus FET Drive/ Enable Output Both ADM1062 10 1 10 SMBus Both ADM1063 10 1 10 SMBus Both ADM1064 10 1 10 SMBus Both ADM1065 ADM1066 10 12 1 1 10 10 SMBus SMBus Both Both Voltage Readback — 12-bit ADC 12-bit ADC 12-bit ADC — 12-bit ADC Supply Adj/ Margining — 12-bit ADC, 6 DACs — — — 12-bit ADC, 6 DACs ADM1067 10 1 10 SMBus Both — 6 DACs ADM1068 8 1 8 SMBus Both — — 12-bit ADC, 4 DACs 12-bit ADC, 6 DACs — 12-bit ADC, 6 DACs ADM1069 8 1 8 SMBus Both 12-bit ADC ADM1166 12 1 10 SMBus Both 12-bit ADC ADM1168 8 1 8 SMBus Both — ADM1169 ADM1260 New 1.8 V 1.2 V Time Up/Down Input PWRGND Output Digital Sequencers Part Number 3.3 V Voltage 8 1 8 SMBus Both 12-bit ADC 10: cascadable 1 10 SMBus Both — 6 DACs SEQ_DONE Output Package Price ($U.S.) 6-lead SC70 6.58 40-lead LFSCP, 48-lead TQFP 7.59 40-lead LFSCP, 48-lead TQFP 40-lead LFSCP, 48-lead TQFP 40-lead LFSCP, 48-lead TQFP 40-lead LFSCP, 48-lead TQFP 40-lead LFSCP, 48-lead TQFP 32-lead LQFP Power-Up and Power-Down Sequencing with the ADM1186 5V IN ADP1706 EN 8.35 OUT 2.5 V 5V IN ADP2107 7.84 EN OUT 1.8 V 3.3 V AUX 5.82 IN ADP1821 EN OUT 8.60 IN 3.3 V AUX ADP1706 6.58 EN 4.05 32-lead LQFP, 40-lead LFSCP 4.40 40-lead LFSCP, 48-lead TQFP 9.99 32-lead LQFP 5.49 32-lead LQFP, 40-lead LFSCP 6.49 40-lead LFSCP 12.99 VCC OUT1 OUT2 OUT3 FAULT Sequence Control 1.2 V 5V Up Down ADM1186-1 OUT4 VIN1 VIN2 VIN3 VIN4 DLY_EN_OUT1 DLY_EN_OUT2 DLY_EN_OUT3 PWRGD DLY_EN_OUT4 BLANK_DLY GND SEQ_DONE OUT 3.3 V 33 34 High Performance Power Management Products Supervisory Industry’s Lowest Power Supervisors As the world goes more portable, quiescent current and a small package are becoming more important. Drawing only 125 nA over temperature and available in tiny WLCSP packaging, ADI supervisory products, such as the new ADM8611/ADM8612 and ADM8641/ADM8642, are ideal for portable applications. Best Threshold Accuracy: Two Supplies to 12 Supplies High accuracy is critical when monitoring low voltage cores. With up to 2× the accuracy over temperature of competitive parts, these ADI products offer the ability to maintain a much tighter voltage tolerance, thereby maximizing system protection. Dual Triple Quad XX 125 nA max supply current XX Reset thresholds from 1.8 V to 4.63 V XX Watchdog timers XX WLCSP packaging Quad FPGA Core Voltage Voltage Rails For Monitoring I/O Supply ADM6710 VIN1 I/O Supply VCC, IN2 VDD ADM6305 Reset SENSE1 SENSE2 WDI VIN2 VDD FPGA, Microprocessor, DSP, or ASIC Four Voltage Rails ADM13307 SENSE1 Reset SENSE2 FPGA Four Voltage Rails FPGA Logic VIN3 Internal Logic OUT3 PWRGD VIN4 VIN4 OUT1 OUT2 VIN2 Reset VIN3 ADM1184 VIN1 SENSE3 MR ADM6305: dual supervisor in 5-lead SOT-23. 0.60 V REF 0.62V VREF ADM13307: ±0.8% accurate triple processor supervisor in 8-lead, narrow-body SOIC package. ADM6710: ±1.5% accurate triple/quad voltage microprocessor supervisor in 6-lead SOT-23 package. ADM1184: ±0.8% accurate quad voltage monitor in 10-lead MSOP package. VCC Voltage Rails For Monitoring 5V ADM8614 Reset VDD MR ADM13305 Reset SENSE1 SENSE2 MR WDI FPGA, Microprocessor, DSP, or ASIC ADP121 VIN VOUT GND Micro- VCC processor WDI 3.3 V ADM706R/ ADM706S/ ADM706T PFI VCC Reset MR VTH GND Reset WDI WDO PFO Reset VCC I/O Line Microprocessor NMI Interrupt GND Manual Reset 140 ms 1.6 s 140 ms WDI ADM13305: ±0.8% accurate dual processor supervisor in 8-lead, narrow-body SOIC package. ADM8614: ultralow power (ICC = 190 nA, max) supervisory ICs with watchdog timer and manual reset. ADM706: voltage monitoring microprocessor supervisory circuits. Visit analog.com/power Supervisory—Simple Reset/Power-On Reset Reset Threshold (V) Min Reset Timeout (ms) ADM1810 4.35, 4.62 100 ADM1811 4.35, 4.62 100 ADM1812 4.35, 4.62 100 ADM1813 4.35, 4.62 100 ADM1815 2.18, 2.31, 2.55, 2.88, 3.06 100 ADM1816 2.18, 2.31, 2.55, 2.88, 3.06 100 ADM1817 2.18, 2.31, 2.55, 2.88, 3.06 100 ADM1818 2.18, 2.31, 2.55, 2.88, 3.06 100 ADM6315 2.63, 2.93, 3.08, 4.39, 4.5, 4.63 2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.39, 4.5, 4.63, 4.7, 4.8, 4.9, 5.0 2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.39, 4.5, 4.63, 4.7, 4.8, 4.9, 5.0 2.2, 2.32, 2.4, 2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08 2.2, 2.32, 2.4, 2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.38, 4.5, 4.63 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.38, 4.5, 4.63 1.58, 1.67, 2.19, 2.31, 2.4, 2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.39, 4.5, 4.63, 4.7, 4.8, 4.9, 5.0 2.32, 2.63, 2.93, 3.08, 4.38, 4.63 2.32, 2.63, 2.93, 3.08, 4.38, 4.63 1.58, 1.67, 2.19, 2.32, 2.63, 2.93, 3.08, 4.38, 4.63 4.65 4.65 4.4 2.63, 2.93, 3.08, 4.4, 4.65 2.32, 2.63, 2.93, 3.08, 4.38, 4.63 2.32, 2.63, 2.93, 3.08, 4.0, 4.38, 4.63 2.32, 2.63, 2.93, 3.08, 4.0, 4.38, 4.63 2.32, 2.63, 2.93, 3.08, 4.38, 4.63 2.32, 2.63, 2.93, 3.08, 4.38, 4.63 2.19, 2.32, 2.63, 2.93, 3.08, 4.38, 4.63 4.65 2 to 4.63 0.6 to 1.9 2 to 4.63 0.6 to 1.9 Part Number ADM6319 ADM6322 ADM6326 ADM6328 ADM6346 ADM6348 ADM6384 ADM6711 ADM6713 ADM6825 ADM698 ADM707 ADM708 ADM709 ADM803 ADM809 ADM810 ADM811 ADM812 ADM825 ADM8698 ADM8611 New ADM8612 New ADM8641 New ADM8642 New 1 1000 to 4999. Reset Output Stage Manual Reset Capability Supply Current Typ (μA) Package Price1 ($U.S.) No 4 3-lead SC70, 3-lead SOT-23 0.45 — No 4 3-lead SC70, 3-lead SOT-23 0.45 Push-pull No 4 3-lead SC70, 3-lead SOT-23 0.45 — Yes 4 3-lead SC70, 3-lead SOT-23 0.39 — No 4 3-lead SC70, 3-lead SOT-23 0.39 — No 4 3-lead SC70, 3-lead SOT-23 0.45 Push-pull No 4 3-lead SC70, 3-lead SOT-23 0.45 — Yes 4 3-lead SC70, 3-lead SOT-23 0.45 — Yes 4 4-lead SOT-143 0.73 Push-pull Push-pull Yes 5 5-lead SOT-23 0.50 1, 20, 140, 1120 Open-drain Push-pull Yes 5 5-lead SOT-23 0.50 100 100 100 100 Push-pull Open-drain Push-pull Open-drain — — — — No No No No 0.5 0.5 1 1 3-lead SOT-23 3-lead SOT-23 3-lead SOT-23 3-lead SOT-23 0.95 0.95 0.95 0.95 1, 20, 140, 1120 Push-pull — Yes 3 4-lead SC70 0.94 140 140 140 140 160 160 140 140 140 140 140 140 140 140 140 140 0 0 Push-pull Open-drain Push-pull Push-pull Push-pull Push-pull Push-pull Open-drain Push-pull — Push-pull — Push-pull Push-pull Open-drain Open-drain Open-drain Open-drain — — Push-pull Push-pull Push-pull Push-pull — — — Push-pull Yes Yes Yes No Yes Yes No No No No Yes Yes Yes No Yes Yes Yes Yes 12 12 7 600 190 190 35 17 17 17 5 5 5 70 0.092 0.092 0.092 0.092 4-lead SC70 4-lead SC70 5-lead SOT-23 8-lead PDIP, 16-lead SOIC 8-lead PDIP, 8-lead SOIC 8-lead PDIP, 8-lead SOIC, 8-lead MSOP 8-lead PDIP, 8-lead SOIC 3-lead SC70 3-lead SC70, 3-lead SOT-23 3-lead SC70, 3-lead SOT-23 4-lead SOT-143 4-lead SOT-143 5-lead SC70, 5-lead SOT-23 8-lead PDIP, 8-lead SOIC_N, 16-lead SOIC_W 1.5 mm × 1 mm WLCSP 1.5 mm × 1 mm WLCSP 1.5 mm × 1 mm WLCSP 1.5 mm × 1 mm WLCSP 0.26 0.28 0.50 1.35 0.96 0.84 0.70 0.26 0.61 0.60 0.45 0.45 0.50 1.99 0.53 0.59 0.25 0.25 Active High — 1, 20, 140, 1120 Active Low Push-pull Internal pull-up — Internal pull-up Push-pull Internal pull-up — Internal pull-up Open-drain 1, 20, 140, 1120 Push-pull Push-pull Push-pull — — — — 35 36 High Performance Power Management Products Supervisory—Watchdog Timers Reset Output Stage Typ Watchdog Timeout (ms) PowerFail Indicator Yes 1600 No Push-pull Yes 150/600/1120 No Push-pull — Yes 1, 20, 140, 1120 Push-pull Push-pull No 1, 20, 140, 1120 Open-drain — Yes 1, 20, 140, 1120 Open-drain Push-pull No 140 140 140 140 140 160 160 140 140 1, 20, 140, 1120 1, 20, 140, 1120 — Open-drain Push-pull Push-pull Push-pull Push-pull Push-pull Push-pull Push-pull Push-pull Open-drain Push-pull — — Push-pull Push-pull — — — Push-pull — — Part Number Reset Threshold (V) Min Reset Timeout (ms) Manual Reset Capability Active High Active Low ADM13305 ADM1232/ ADM1232A 0.6 (adj), 1.68, 2.25, 2.93, 4.55 140 Push-pull Push-pull 4.37, 4.62 250 Open-drain 1, 20, 140, 1120 Package Price1 ($U.S.) 8-lead SOIC_N 8-lead PDIP, 8-lead SOIC, 16-lead SOIC_W, 8-lead MSOP 0.95 No 5-lead SOT-23 0.50 No 5-lead SOT-23 0.50 No 5-lead SOT-23 0.50 0.94 ADM6821 ADM6822 ADM6823 ADM6824 ADM699 ADM705 ADM706 ADM823 ADM824 ADM8616 ADM8617 2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.39, 4.5, 4.63, 4.7, 4.8, 4.9, 5.0 2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.39, 4.5, 4.63, 4.7, 4.8, 4.9, 5.0 2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.39, 4.5, 4.63, 4.7, 4.8, 4.9, 5.0 2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.39, 4.5, 4.63, 4.7, 4.8, 4.9, 5.0 1.58, 1.67, 2.19, 2.32, 2.63, 2.93, 3.08, 4.38, 4.63 1.58, 1.67, 2.19, 2.32, 2.63, 2.93, 3.08, 4.38, 4.63 1.58, 1.67, 2.19, 2.32, 2.63, 2.93, 3.08, 4.38, 4.63 1.58, 1.67, 2.19, 2.32, 2.63, 2.93, 3.08, 4.38, 4.63 4.65 4.65 4.4 2.19, 2.32, 2.63, 2.93, 3.08, 4.38, 4.63 2.19, 2.32, 2.63, 2.93, 3.08, 4.38, 4.63 1.58, 1.67, 2.19, 2.32, 2.63, 2.93, 3.08, 4.38, 4.63 1.58, 1.67, 2.19, 2.32, 2.63, 2.93, 3.08, 4.38, 4.63 ADM8699 4.65 140 Push-pull Push-pull No 1600 No ADM9690 ADP5041 4.31 0.5 (adj) 10 typ, 50 typ 20, 140 Push-pull Open-drain — — No Yes 0.75/1.5/12.5/25 102/1600 No No 5-lead SOT-23 5-lead SOT-23 5-lead SOT-23 5-lead SOT-23 8-lead PDIP, 16-lead SOIC 8-lead PDIP, 8-lead SOIC 8-lead PDIP, 8-lead SOIC 5-lead SC70, 5-lead SOT-23 5-lead SC70, 5-lead SOT-23 4-lead SC70 4-lead SC70 8-lead PDIP, 8-lead SOIC_N, 16-lead SOIC_W 8-lead SOIC 20-lead LFCSP ADM8613 New 2.32 to 4.63 140 Open-drain — Yes 1600/25,600 No 1.5 mm × 1 mm, 6-ball WLCSP 0.65 ADM8614 New ADM8615 New 2.32 to 4.63 0.5 to 1.9 2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.39, 4.5, 4.63, 4.7, 4.8, 4.9, 5.0 2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.39, 4.5, 4.63, 4.7, 4.8, 4.9, 5.0 140 140 Open-drain Open-drain — — — Yes No No 1.5 mm × 1 mm, 6-ball WLCSP 1.5 mm × 1 mm, 6-ball WLCSP 0.65 0.65 1, 20, 140, 1120 Push-pull — Yes No 5-lead SOT-23 0.69 1, 20, 140, 1120 Push-pull Push-pull Yes 1600/100,000 1600/25,600 6.3/102/1600/ 25,600 6.3/102/1600/ 25,600 No 5-lead SOT-23 0.69 2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.39, 4.5, 4.63, 4.7, 4.8, 4.9, 5.0 1, 20, 140, 1120 Open-drain — Yes No 5-lead SOT-23 0.69 1, 20, 140, 1120 Open-drain Push-pull Yes No 5-lead SOT-23 0.69 1, 20, 140, 1120 Open-drain Push-pull No No 5-lead SOT-23 0.69 ADM6316 ADM6318 ADM6320 ADM6321 ADM8316 ADM8318 ADM8320 ADM8321 ADM8322 1 1000 to 4999. 2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.39, 4.5, 4.63, 4.7, 4.8, 4.9, 5.0 2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.39, 4.5, 4.63, 4.7, 4.8, 4.9, 5.0 No 5-lead SOT-23 0.50 Yes Yes Yes No No Yes Yes Yes Yes No No 6.3/102/1600/ 25,600 6.3/102/1600/ 25,600 6.3/102/1600/ 25,600 6.3/102/1600/ 25,600 1600 1600 1600 1600 1600 1600 1600 1600 1600 6.3/102/1600 6.3/102/1600 No No No No No Yes Yes No No No No 0.75 0.75 0.75 0.75 1.66 1.01 1.68 0.50 0.50 0.85 0.85 6.3/102/1600/ 25,600 6.3/102/1600/ 25,600 6.3/102/1600/ 25,600 1.99 1.50 1.99 Visit analog.com/power Multivoltage Supervisors Part Number Number of Monitored Voltages Reset Threshold (V) Min Reset Timeout (ms) ADM13305 2 0.6 (adj), 1.68, 2.25, 2.93, 4.55 ADM6305 2 0.4 (adj), 1.23 (adj) ADM6306 2 140 1, 20, 140, 1120 1, 20, 140, 1120 ADM13307 3 ADM6710 3 or 4 ADM1184 4 ADM6339 4 ADM2914 ADM12914 ADM8710 4 4 4 0.4 (adj), 1.23 (adj), 22.5 to 5 (26 options) 0.6 (adj), 1.25 (adj), 1.68, 2.25, 2.93, 4.55 0.62 (adj), 1.58, 1.67, 2.19, 2.32, 2.63, 2.78, 2.93, 3.08, 4.38, 4.63 0.6 (adj) −0.50 (adj), +0.62 (adj), +1.23 (adj), −4.38, −4.63, +1.58, 2.19, +2.63, +2.78, +2.93, +3.08, +4.38, +4.63 0.5 (adj) 0.62 (adj) 0.62 (adj), 1.73, 3.07 1000 to 4999. 1 +5.0 V +3.3 V +1.8 V –5.0 V IN1 ADM6339 IN2 Reset IN3 IN4 GND Quad voltage microprocessor supervisory circuit. MicroProcessor Reset Output Stage Active Low Active High Manual Reset Capability Typ Watchdog Timeout (ms) Package Price1 ($U.S.) Push-pull Push-pull Yes 1600 8-lead SOIC_N 0.95 Open-drain — — — 5-lead SOT-23 1.15 Open-drain — — Yes 5-lead SOT-23 1.15 140 Push-pull Push-pull Yes — 8-lead SOIC_N 0.98 140 Open-drain — No — 6-lead SOT-23 1.60 100 Open-drain — No — 10-lead MSOP 1.79 140 Open-drain — No — 6-lead SOT-23 1.79 Adj Adj Adj Open-drain Open-drain Open-drain — — — — — No — — — 16-lead QSOP 16-lead QSOP 6-lead SOT-23 2.49 2.79 1.79 37 38 High Performance Power Management Products Supervisory—Battery Backup Part Number 1 Reset Threshold (V) Min Reset Timeout (ms) ADM690 ADM690A ADM691 4.65 4.65 4.65 ADM691A Reset Output Stage Backup Battery Switch Chip Enable Gating Typ Watchdog Timeout (ms) Yes Yes Yes No No Yes 100, 1600 1600 100, 1600, adj Open-drain Yes Yes 100, 1600, adj Push-pull Push-pull Push-pull Push-pull Push-pull Push-pull Push-pull Push-pull Push-pull Push-pull — Push-pull — — Push-pull Open-drain — Push-pull Open-drain Push-pull Open-drain — Push-pull — Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes No No Yes Yes No Yes No Yes Yes No No No 100, 1600, adj 1600 100, 1600, adj 100, 1600, adj 100, 1600, adj 100, 1600, adj 100, 1600, adj 100, 1600, adj 100, 1600, adj 1600 1600 1600 35 adj Push-pull Push-pull Yes Yes 100, 1600, adj 140 140 adj 35 adj 35 adj Push-pull Push-pull Push-pull Push-pull — Push-pull Push-pull Push-pull Yes Yes Yes No No Yes No Yes 100, 1600 100, 1600, adj 100, 1600, adj 100, 1600, adj 35 140 35 adj Active Low Push-pull Push-pull Push-pull Active High — — Push-pull 4.65 140 adj Push-pull ADM692 ADM692A ADM693 ADM693A ADM694 ADM695 ADM696 ADM697 ADM800 ADM802 ADM805 ADM8690 4.4 4.4 4.4 4.4 4.65 4.65 1.3 adj 1.3 adj 4.3, 4.55 4.4, 4.65 4.4, 4.65 4.65 35 140 35 adj 140 adj 140 140 adj 35 35 140 adj 140 140 35 ADM8691 4.65 ADM8694 ADM8695 ADM8696 ADM8697 4.65 4.65 1.3 adj 1.3 adj 1000 to 4999. Package 8-lead PDIP 8-lead PDIP, 8-lead SOIC, 8-lead MSOP 16-lead PDIP, 16-lead SOIC 16-lead PDIP, 16-lead SOIC_N, 16-lead SOIC_W, 16-lead TSSOP 8-lead PDIP 8-lead PDIP, 8-lead SOIC 16-lead PDIP, 16-lead SOIC 16-lead PDIP, 16-lead SOIC_N, 16-lead SOIC_W 8-lead PDIP 16-lead PDIP, 16-lead SOIC 16-lead PDIP, 16-lead SOIC_W 16-lead PDIP, 16-lead SOIC_W 16-lead PDIP, 16-lead SOIC_N, 16-lead SOIC_W 8-lead PDIP, 8-lead SOIC 8-lead PDIP, 8-lead SOIC 8-lead PDIP, 8-lead SOIC 16-lead PDIP, 16-lead SOIC_N, 16-lead SOIC_W, 16-lead TSSOP 8-lead PDIP, 8-lead SOIC 16-lead SOIC_W 16-lead PDIP, 16-lead SOIC_W, 16-lead TSSOP 16-lead PDIP, 16-lead SOIC_W, 16-lead TSSOP Price1 ($U.S.) 2.39 1.50 2.70 1.66 2.39 1.66 2.70 1.83 2.50 2.70 2.60 2.60 2.30 2.20 2.20 2.49 2.98 2.69 2.16 2.69 2.69 Visit analog.com/power Low Power Comparators Number Per Package 2 2 1 1 1 1 1 1 2 2 4 4 8 8 Internal Reference Yes Yes Yes Yes Yes Yes No No Yes Yes No Yes Yes Yes Reference Accuracy (±%) 0.275 0.275 3.5 3.5 3.5 0.275 — — 1.50 1.50 — 0.8 1.5 0.8 Supply Voltage (V) 1.7 to 5.5 1.7 to 5.5 2.25 to 5.5 2.25 to 5.5 2.25 to 5.5 1.7 to 5.5 2.25 to 5.5 2.25 to 5.5 1.7 to 5.5 1.7 to 5.5 5 2.7 to 5.5 2.3 to shunt 2.3 to shunt Supply Current Typ (μA) 6.5 6.5 10.0 10.0 10.0 6.5 4.0 4.0 5.7 5.7 800.0 80 62 62 ADCMP391 New 1 No — 2.3 to 5.5 18.5 ADCMP392 New 2 No — 2.3 to 5.5 20.7 ADCMP393 New 4 Yes — 2.3 to 5.5 26.6 ADCMP394 New 1 Yes 0.8 2.3 to 5.5 35 ADCMP395 New 2 Yes 0.8 2.3 to 5.5 38 ADCMP396 New 4 Yes 0.8 2.3 to 5.5 41.32 ADCMP380 New 1 Yes 1.6 2 to 5.5 0.092 Part Number ADCMP341 ADCMP343 ADCMP350 ADCMP354 ADCMP356 ADCMP361 ADCMP370 ADCMP371 ADCMP670 ADCMP671 CMP04 ADM1184 ADM2914 ADM12914 1 1000 to 4999. Input Range (V) 0 to VCC 0 to VCC 0 to 22 0 to 22 0 to 22 0 to VCC 0 to 22 0 to 22 0 to VCC 0 to VCC 0 to VCC − 1.5 0 to VCC 0 to VCC 0 to VCC –0.2 to VCC + 0.2 –0.2 to VCC + 0.2 –0.2 to VCC + 0.2 –0.2 to VCC + 0.2 –0.2 to VCC + 0.2 –0.2 to VCC + 0.2 0 to 5.5 Propagation Delay Typ (μs) 10.0 10.0 5.0 5.0 5.0 10.0 5.0 5.0 10.0 10.0 1.3 30.0 125 125 Hysteresis Logic I/O Package Price1 ($U.S.) Adj Adj Internal Internal Internal Internal Internal Internal Internal Internal — Fixed Internal Internal Open-drain Open-drain Open-drain/active low Open-drain/active high Push-pull/active high Open-drain Open-drain Push-pull Open-drain Open-drain: PG/OV Open-collector Open-drain Open-drain Open-drain 8-lead SOT-23 8-lead SOT-23 4-lead SC70 4-lead SC70 4-lead SC70 5-lead SOT-23 5-lead SC70 5-lead SC70 6-lead TSOT 6-lead TSOT 14-lead SOIC 10-lead MSOP 16-lead QSOP 16-lead QSOP 0.90 0.90 0.31 0.31 0.31 0.60 0.28 0.28 1.40 1.49 4.75 1.79 2.49 2.79 5 Internal Open-drain 8-lead SOIC-N 0.25 5 Internal Open-drain 8-lead SOIC-N 0.34 5 Internal Open-drain 14-lead SOIC 0.49 5 Internal Open-drain 8-lead SOIC-N 0.37 5 Internal Open-drain 10-lead MSOP 0.64 5 Internal Open-drain 16-lead SOIC 0.98 23 Internal Open-drain 1.46 mm × 0.96 mm 0.45 39 40 High Performance Power Management Products Li-Ion Battery Monitoring Window Comparator 12 V VDD IN + RX VDD OUT 3V Li-Ion Cell ADCMP671 INH UV Microprocessor OUT 400 mV RY OV 400 mV ADCMP361 INL VBATT 2.280 V GND Charging 2.271 V Quad UV/OV Positive/Negative Monitor 5V 3.3 V 2.5 V 1.8 V VH1 VCC SEL VL1 Timer VH2 VL2 System ADM12914 VH3 OV VL3 UV VH4 VL4 REF OV RZ Discharging VOUT PSU PWRGD Latch/DIS GND Visit analog.com/power Isolated Power Integrating power supply isolation with data signal isolation has, until recently, been a challenge because of the difficulty of transmitting power from the nonisolated system side to the isolated field side. In the past, transferring power across an isolation barrier required a lot of area, with an expensive module or a complex discrete solution. Analog Devices has addressed this issue by introducing isoPower®—an extension of the award winning iCoupler® technology. isoPower is a complete and fully integrated isolation solution for power transfer across an isolation barrier using microtransformers. The iCoupler technology enables both signal and power to be integrated into a single, tiny surface-mount package with isolation up to 5 kV. Isolated switching regulators—another extension of iCoupler technology—provide higher efficiency, power, and board savings over discrete solutions through integration. Features include: secondary side sensing, integrated and isolated feedback, isolated dc-to-dc conversion with up to 80% efficiency, and regulated output voltages between 3.3 V to 30 V. Digital Isolators with iso Power Integrated, Isolated Power Number of Data Channels Part Number 2.5 kV rms Isolation ADuM5000* ADuM5010 ADuM520x ADuM521x ADuM524x ADuM540x* 3.75 kV rms Isolation ADuM6010 ADuM621x 5 kV rms Isolation ADuM6000 ADuM620x ADuM640x Total Reverse Direction Options 0 1 2 3 Max Data Rate (Mbps) Max Output Power (mW) Max Temperature (°C) Package 1, 25 1, 25, 100 1 1, 25 500 @ 5 V 150 @ 5 V 500 @ 5 V 150 @ 5 V 50 @ 5 V 500 @ 5 V 105 105 105 105 105 105 16-lead SOIC_W 20-lead SSOP 16-lead SOIC_W 20-lead SSOP 8-lead SOIC_N 16-lead SOIC_W 4 0 0 2 2 2 4 • • • • • • • • • • • • 0 2 • • • 1, 25, 100 150 @ 5 V 150 @ 5 V 105 105 20-lead SSOP 20-lead SSOP 0 2 4 • • • • • • 1, 25 1, 25 400 @ 5 V 400 @ 5 V 400 @ 5 V 105 105 105 16-lead SOIC_W/16-lead SOIC_IC 16-lead SOIC_W/16-lead SOIC_IC 16-lead SOIC_W/16-lead SOIC_IC • • • • *Automotive qualified models available. Please visit product pages for more information. Isolated Switching Regulators Number of Data Channels Part Number 2.5 kV rms Isolation ADuM3070 ADuM347x* 5 kV rms Isolation ADuM4070 ADuM447x Total Max Data Rate (Mbps) Reverse Direction Options Max Output Power (mW) Current (mA) Range (V) Max Temperature (°C) Package 0 1 2 3 4 0 4 • • • • • 1, 25 500 400 3.3 to 24 3.3 to 24 105 105 16-lead QSOP 20-lead SSOP 0 4 • • • • • 1, 25 500 500 3.3 to 24 3.3 to 24 105 105 16-lead SOIC_IC 20-lead SOIC_IC *Automotive qualified models available. Please visit product pages for more information. 41 42 High Performance Power Management Products Display/Illumination Lighting High Performance LED Driver Solutions ADI’s wide portfolio of high efficiency and flexible driver ICs targets general illumination and backlighting applications. The portfolio is comprised of buck, boost, charge pump, and sink type LED driver solutions to meet the requirements of almost any input power source. The drivers include special features to ensure a robust and safe design and also have dimming and other control features that maximize the performance of the end application. Step-Up (Boost) LED Drivers Part Number ADP5501 ADP5520 ADD5201 ADD5203 ADD5205 ADD5207 ADD5211 VIN (V) VOUT Max (V) Number of Strings 2.7 to 5.5 2.7 to 5.5 6 to 21 6 to 21 2.8 to 18 6 to 21 3.5 to 40 24 24 45 45 28 36 80 1 1 8 8 4 4 4 Max LEDs Per String 6 6 12 12 6 10 22 Max Current Per String (mA) Boost Type 30 30 30 (240 total) 30 (240 total) 25 (100 total) 25 (100 total) 200 (800 total) Inductive Inductive Inductive Inductive Inductive Inductive Inductive Switching Frequency (MHz) Variable Variable 1 1 1 1 0.2 to 1.2 I2C Support Package Price @ 1k ($U.S.) Yes Yes Yes Yes No No No 24-lead LFCSP 24-lead LFCSP 28-lead LFCSP 28-lead LFCSP 12-lead LFCSP 14-lead LFCSP 24-lead LFCSP 1.20 1.66 1.40 1.40 1.15 1.32 1.40 Step-Down (Buck) LED Drivers Part Number ADP2384 ADP2386 ADP2441 VIN (V) Number of Strings Max LEDs Per String Max Current Per String (mA) Switching Frequency (MHz) Package Price @ 1k ($U.S.) 4.5 to 20 4.5 to 20 4.5 to 36 1 1 1 5 5 10 4000 6000 1000 0.2 to 1.4 0.2 to 1.4 0.2 to 1 24-lead LFCSP 24-lead LFCSP 12-lead LFCSP 1.74 2.04 1.78 Current Sink LED Drivers Part Number ADP8140 VIN (V) Number of Strings Max LEDs Per String Max Current Per String Package Price @ 1k ($U.S.) Up to 100 4 28 500 mA (2 A total) 16-lead LFCSP 1.50 Inductorless (Charge Pump) LED Drivers Part Number VIN (V) VOUT Max (V) Number of Strings LEDs Per String Max Current Per String (mA) Boost Type I2C Support ADP8860 2.5 to 5.5 5.5 7 1 30 Charge pump Yes ADP8861 2.5 to 5.5 5.5 7 1 30 Charge pump Yes ADP8863 2.5 to 5.5 5.5 7 1 30 Charge pump Yes ADP8866 2.5 to 5.5 5.5 9 1 25 Charge pump Yes ADP8870 2.5 to 5.5 5.5 7 1 30 Charge pump Yes ADM8843 ADM8845 2.6 to 5.5 2.6 to 5.5 5.5 5.5 4 6 1 1 20 30 Charge pump Charge pump No No Package 20-ball WLCSP, 20-lead LFCSP 20-ball WLCSP, 20-lead LFCSP 20-ball WLCSP, 20-lead LFCSP 20-lead LFCSP 20-ball WLCSP, 20-lead LFCSP 16-lead LFCSP 16-lead LFCSP Price @ 1k ($U.S.) 1.36 1.22 1.22 1.48 1.48 0.50 0.71 Visit analog.com/power Flash LED Drivers Industry Best Efficiency 100 ADI offers a wide portfolio of flash LED drivers that fit the requirements of almost any mobile phone application. A variety of flash currents and LED configurations are supported. The drivers enhance photo quality by maximizing LED brightness and by including programmable operating modes that mitigate flash related photo degradation. PCB area is minimized through the use of small WLCSP packages and minimal external component count. 90 Efficiency (%) 80 New Product Focus: ADP8140 70 60 4-Channel, High Current LED Driver with Adaptable Power Control VCC XX DC dimming for noiseless operation XX 4 internal 500 mA current sinks XX 2% matching between LED channels FB XX Supports dc input systems up to 100 V COMP XX Full array of safety features for robust designs XX Available in a 4 mm × 4 mm LFCSP package AGND VCC L1 50 COUT 40 ADP1650: VIN = 3.6 V Competitor: VIN = 3.6 V 0 0.5 VIN ADP2441 1.0 Efficiency vs. load current (high VF ). SW EN PGND PGOOD FREQ Cost-Effective High Performance Flash LED Driver Input Voltage = 2.7 V To 5.0 V SS VCC NTC 10 µF 1.0 µH ADP8140 MIN VIN VT VREG DIM MODE SINK1 EN nFAULT SINK2 FB_OUT SINK3 SINK4 COMP ISET VO_SNS Enable nFault 1.5 ILoad (A) BST Dim Tx1/Torch GPIO1 Tx2/ILED/ADC GPIO2 SW VOUT VIN 10 µF ADP1650 Strobe LED_OUT SCL SDA EN SGND PGND Max 1.5 A Exposed Pad HPWLED Flash Drivers Part Number ADP1649 ADP1650 ADP1653 ADP1655 ADP1660 VIN (V) Max VOUT (V) WLED Configuration 2.7 to 5.0 2.7 to 5.0 2.75 to 5.5 2.5 to 5.5 2.7 to 5.0 5 5 12 10 5 1 1 2 in series 2 in series 2 in parallel WLED Current 1000 1500 500 400 1500 Torch Mode Yes Yes Yes Yes Yes LED Control Boost Type Source Source Sink Source Source Inductive Inductive Inductive Inductive Inductive WLED Brightness Control I2C programmable I2C programmable I2C programmable I2C programmable I2C programmable Switching Frequency (MHz) Package Price @ 1k ($U.S.) 3 3 1.2 2 3 12-ball WLCSP 12-ball WLCSP, 10-lead LFCSP 16-lead LFCSP 12-ball WLCSP 12-ball WLCSP 0.85 1.00 1.45 0.95 1.00 43 44 High Performance Power Management Products Battery Chargers ADP5063 was recently released for emerging LiFePO4 (lithium iron phosphate) batteries where the termination charging voltage is lower than other Li-Ion batteries with 3.6 V as a typical value. ADP5063 has a default termination charging voltage at 3.6 V to comply with LiFePO4 battery charging. ADP506x is a new series of battery chargers compatible with USB 3.0 and USB 1.2 battery charging specifications. The ADP506x series features power path control with integrated battery isolation FET between the battery and system load, enabling a system to be booted up instantly even if the battery is overdepleted or dead. An I2C interface and three fuse selected GPIOs* maximize design flexibility and programmability. The ADP506x series is designed for use with an NTC thermistor in the battery pack to monitor temperature. Compatible with the JEITA battery charging specification, the ADP506x series automatically changes charging current or charging termination voltage dependent on different battery temperature range. ADP5090 is a new ultralow power boost charger targeted at emerging photovoltaic/solar harvesters and thermoelectric generators. It comes with 320 nA quiescent current to generate best efficiency under ultralow input power conditions. Integrated charge control allows maximized design flexibility for different energy storage like supercapacitors or Li-Ion batteries. *GPIO is a factory programmable general-purpose input/output. Cost-Effective Linear Mode Charger XX XX AC or USB Up to 1.3 A charge current XX Integrated power path control XX Flexible programmability with I2C interface and three fuse programmable digital GPIOs XX Fast and High Efficiency Linear Mode Charger USB battery charging spec compliance ADP5061 VIN VBUS Charger Control Block 3 MHz switching buck regulator XX USB battery charging spec compliance XX C4 22 µF ISO_B DIG_IO1 DIG_IO2 DIG_IO3 XX System C3 47 µF SCL SDA Ideal for limited PCB space and cost sensitive charging applications ISO_S CBP C2 10 nF C1 10 µF Programmable Flexible programmability with I2C interface and two hardware control inputs to set input current limit and enable/disable trickle charging XX VLED 3 MHz Buck CFILT XX THR ILED Up to 680 mA charge current from 500 mA USB host Integrated power path control + Li-Ion ADP5065 System SWx Inductor XX BAT_SNS SYS_EN AC or USB VBUS VINx Ideal for shortening full charging time and cooler PGNDx ISO_Sx IIN_EXT TRK_EXT SCL SDA ISO_Bx Charger Control Block BAT_SNS THR Li-Ion SYS_ON_OK V_WEAK_SET AGND + PGNDx AGND Part Number Switching/ Linear Number of Cells Charged Cell Type Max Charge Current (A) VIN Protection (V) VIN Operating Range (V) ADP5065 Switching 1 Li-Ion 1.25 Up to 20 4.0 to 5.5 ADP5061 Linear 1 Li-Ion 1.3 Up to 20 4.0 to 7.0 ADP5062 Linear 1 Li-Ion 1.3 Up to 20 4.0 to 7.0 ADP5063 New Linear 1 LiFePO4 1.3 Up to 20 4.0 to 7.0 Switching ADP5090 New (boost/step-up) 1 Li-Ion super cap 50 mA Up to 3.6 ADP2291 1 Li-Ion 1.5 Up to 13.5 1 1000 to 4999. Linear Support Comply with JEITA Battery Charging I2C Interface 1 Yes 75 mΩ Yes Yes 1 Yes 32 mΩ Yes Yes 1 Yes 54 mΩ Yes Yes 3.6 1 Yes 54 mΩ Yes Yes 80 mV to 3.3 2.0 to 5.5 (adjustable) 3 Yes 1Ω No No 4.5 to 12 4.2 1 No — No No 3.5 to 4.4 (20 mV per step) 3.8 to 4.5 (20 mV per step) 3.6 to 4.5 (20 mV per step) Accuracy Over Temperature (%) Power Path Control SYS-BAT FET On Resistance Final Voltage Options (V) Package 2.7 mm × 2.1 mm, 20-ball WLCSP 2.6 mm × 2.0 mm, 20-ball WLCSP 4.0 mm × 4.0 mm, 20-lead LFCSP 4.0 mm × 4.0 mm, 20-lead LFCSP 3.0 mm × 3.0 mm, 16-lead LFCSP 8-lead LFCSP, 8-lead MSOP Price1 ($U.S.) 1.60 1.50 1.50 1.50 1.99 1.12 Visit analog.com/power Keypad I/O Expanders I/O Expanders and QWERTY Keypad Controllers ADI’s family of keypad controllers reduces the power consumption in devices while simplifying the design and PCB routing of keypad systems. Benefits XX Reduced power consumption during idle state ADI Keypad Controllers vs. Processor-Based Keypad Controllers ADI Keypad Controllers Processor-Based Keypad Controllers Typical polling current—55 μA Only draws current during key press Simple board to board interface Typical pulling current—60 mA Constant high current drain Complex board to board interface Support for QWERTY 16 30 No 16 30 No I2C interface and register programmable GPIOs, keypad lock, reset, interrupt ADP5588 1.8 to 3 16 80 Yes I2C interface and register programmable GPIOs, ALS, reset, interrupt 24-lead LFCSP 1.20 ADP5589 2.5 to 5.5 19 96 Yes I2C interface and register programmable GPIOs, ALS, reset, interrupt 24-lead LFCSP, 25-ball WLCSP 1.20 VCC ALS RST INT Control Interface 18 23 Control Registers 22 Control Interface 20 17 24 SCL nRST Interrupt Controller nINT 9 R0 C0 A7 A6 A5 A4 A3 A2 A1 A0 C7 C6 C5 C4 C3 C2 C1 C0 D7 D6 D5 D4 D3 D2 D1 D0 E7 E6 E5 E4 E3 E2 E1 E0 Portable ECG F7 F6 F5 F4 F3 F2 F1 F0 G7 G6 G5 G4 G3 G2 G1 G0 H7 H6 H5 H4 H3 H2 H1 H0 Keypad Controller I7 I6 J7 J6 I5 I4 I3 I2 I1 I0 J5 J4 J3 J2 J1 J0 10 11 12 13 14 15 16 C7 8 C6 7 C5 6 C4 5 C3 4 C2 3 C1 2 B7 B6 B5 B4 B3 B2 B1 B0 SDA Reset Control 1 R1 RST INT R2 ROW[7:0] ADP5588 I2C Slave 21 R3 SCL SDA 1.15 ADP5587 19 GPI COL[9:0] 0.75 Yes SDA Keyboard Control 0.75 80 SCL GPIO Control 16-ball WLCSP 16-ball WLCSP 24-lead LFCSP, 25-ball WLCSP 18 I2C Register Interface 10 mA sinks, PWM generator, logic functions 10 mA sinks, 2 PWM generators, logic functions Price @ 1k ($U.S.) 1.8 to 3 GND ALS CMP Inputs Package ADP5587 VCC Processor Other Functions R4 Reduced EMI in system LFCSP packages for flex PCB mounting Number of Keys R5 XX XX ADP5586 1.8 to 3 1.8 to 3 Number of I/Os R6 Simplified PCB layout Decreased GPIO requirements in main PCB ADP5585 VIN (V) R7 XX XX Part Number C9 C8 45 46 High Performance Power Management Products VDDINT Domain • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •  •3 • • • • •  •3 • • • • • • • • 1.32 350 0.8 0.8 1.45 1.32 900 400 500, 533, 600 0.8 1.43 900 • • • • •  •3 • •  •3 • • • 400, 533 400 533, 600 All All All 0.8 0.9 0.9 0.8 1.1 1.1875 1.375 1.43 1.43 1.42 1.47 1.3125 850 750 1350 1600 150 1000 • • • • • • • • • • • • • •  •3 • • •  •3 • •  •3  •3 • • •  •3 • •  •3 • •  •3 • • • • •  •3 • • • • •  •3 • • • • • • Min Voltage (V) Nom Voltages (V) Max Voltage (V) Max Current (mA) • • • • • • • • • • • • • • • • • •  •4 • • • • •  •4 • • • • •  •4 • • • • •  •4 • • • • •  •4 • • • • •  •4 • • • • •  •4 • • 1.8, 2.5, 3.3 1.8, 2.5, 3.3 2.6 1.8 3.3 2.5 Reset/Watchdog Support N/A N/A N/A N/A 30 25 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •  •4 • • • • •  •4 • • • • • • • • • • • • • • • • • • • • •  •4 • • 3.0 to 18 • • • • 0.8 • 3.15 to 14 ADP1864 • • • • 400 • 0.8 to 14 8A ADP1829 • • • • 500, 533, 600 300, 400 • 0.6 to 15.3 30 A ADP5041, 1 buck, 2 LDOs 0.8 to 3.8 Buck: 3.0 to 5.5 Buck: 2.3 to 5.5; LDO: 1.7 to 5.5 SW: 1.8 A SW: 1.2 A; LDO: 300, 300 ADP5135, 3 bucks 0.8 to 3.8 Buck: 2.3 to 5.5; LDO: 1.7 to 5.5 SW: 1.2 A; LDO: 300, 300 ADP5040, 1 buck, 2 LDOs 0.8 to 3.8 Buck: 2.3 to 5.5; LDO: 1.7 to 5.5 SW: 800, 800; LDO: 300, 300 ADP5037, 2 bucks, 2 LDOs 0.8 to 3.8 Buck: 2.3 to 5.5; LDO: 1.7 to 5.5 SW: 1.2 A, 1.2 A; LDO: 300, 300 ADP5134, 2 bucks, 2 LDOs 0.8 to 3.8 Buck: 2.3 to 5.5; LDO: 1.7 to 5.5 SW: 1.2 A, 1.2 A; LDO: 300 ADP5024, 2 bucks, 1 LDO 0.8 to 3.8 3.2 to 15 Buck: 2.3 to 5.5; LDO: 1.7 to 5.5 0.8 to 3.8 2.3 to 5.5 SW: 800, 800; LDO: 300 0.8 to 5.0 2.8 to 5.0 2.3 to 5.5 1.0 to 3.3 2.7 to 5.5 2.7 to 5.5 2.3 to 5.5 2.7 to 5.5 2.7 to 5.5 2.7 to 5.5 2.3 to 5.5 1.0 to 3.3 0.8 to 3.3 0.8 to 3.3 1.0 to 3.3 1.2 to 3.3 1.2 to 3.3 0.8 to 1.785 ADP5023, 2 bucks, 1 LDO • • • 800 • • 1000 • ADP2370 • 500 ADP2504 250 1.26 2 outputs: 600, 300 1.47 0.95 ADP2140, 1 buck, 1 LDO 1.235 All 800 All • • ADP2138 • • 3000 • • ADP2118 • • 4000 175 225 ADP2114 1.47 1.47 600 1.1 1.1 ADP2108 All All 2000 ADSP-BF50x ADSP-BF51x ADSP-BF522/ADSP-BF524/ ADSP-BF526 ADSP-BF523/ADSP-BF525/ ADSP-BF527 ADSP-BF531/ADSP-BF532/ ADSP-BF533 ADSP-BF533 ADSP-BF534/ADSP-BF536 ADSP-BF534/ADSP-BF536/ ADSP-BF537 ADSP-BF538/ADSP-BF539 ADSP-BF54x ADSP-BF54x ADSP-BF561 ADSP-BF592 ADSP-BF60x ADP2107 Max IDDINT (mA) 600 Max Voltage (V) SC 1500 Min Voltage (V) Micro-PMUs ADP2106 1.6 to 3.6 1200 ADP1754, ADP1755 0.75 to 2.5 1.6 to 3.6 800 ADP1752, ADP1753 0.75 to 2.5 1.6 to 3.6 2000 ADP1740, ADP1741 0.75 to 3.0 4.0 to 28 2.5 to 5.5 0.8 to 5.0 50 ADP1720 1.225 to 5.0 500 ADP1715 2.5 to 5.5 0.75 to 3.3, with tracking 1000 2.5 to 5.5 ADP1707 2.5 to 5.5 1000 ADP1706 0.75 to 3.3, soft start 1.6 to 3.6 2 outputs: 200, 200 ADP220, 2 LDOs Speed (MHz) VDDEXT VDDMEM VDDDDR VDD_DMC VDDUSB VDDOTP 0.8 to 2.8 2.2 to 5.5 300 ADP170 0.8 to 3.0 2.2 to 5.5 150 ADP160 1.2 to 4.2 2.3 to 5.5 200 ADP151 1.2 to 3.3 2.3 to 5.5 500 0.8 to 5.0 2.5 to 5.5 ADP125 0.8 to 5.0 300 1.2 to 3.3 150 ADP123 VOUT (V) Blackfin Processors In micro-PMUs the larger current value refers to bucks while the lower number refers to LDOs. 2 In the micro-PMU case the two voltage ranges refer to the bucks and LDOs respectively. 3 Not all the speed versions supported. 4 Assumes low power DDR2 memories. 1 ADP121 Determine the peak current requirement for each rail of your processor by referring to the relevant data sheets and engineer-to-engineer notes. The ADIsimPower design tool offers a complete set of features to create a complete BOM for all of these solutions. Visit www.analog.com/ADIsimPower. IOUT Max (mA) 1 How to Use This Guide Switching Regulators Part Number ADI power management products provide optimized power for Blackfin®, SHARC®, and microcontroller products—whether it’s a single processor or multiple processors, in handheld or high power applications, ADI has a solution to meet your needs. VIN (V) 2 Linear Regulators Companion Power Selection Guide: Blackfin Processors ADP2102 DSP Companion Guide Other Domains • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •  •4 • • • • • Visit analog.com/power • • • 333 1.14 1.26 <800 1150 • • • • • • • • • • 266 1.14 1.26 700 1600 • • • • • • • • •3 333 1.14 1.35 900 3025 350 1.14 1.365 1050 1900 ADSP-21367/ADSP21368/ADSP-21369 3 3 • • • • 400 1.14 1.35 1100 3100 266 1.14 1.26 600 1200 • ADSP-21467/ADSP21469 400 1 1.1 662 2089 •3 450 1.05 1.15 703 2149 200 1.14 1.26 174 294 • • 266 1.14 1.26 228 369 • • • 300 1.25 1.35 282 422 • • 300 1.05 1.15 540 1959 • • • • 350 1.05 1.15 582 2018 •3 •3 • • 400 1.05 1.15 624 2052 •3 •3 • • • • • Nominal Values (V) Max Current (mA) VDDEXT 3.3 — • • VDD_PLL/ANALOG 1.2 10 • • Reset/Watchdog Support 3 • ADSP-21371/ADSP21375 In micro-PMUs the larger current value refers to bucks while the lower number refers to LDOs. 2 In the micro-PMU case the two voltage ranges refer to the bucks and LDOs respectively. 3 Not all the speed versions supported. 3 • • • • • • • • • •3 • • •3 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3.0 to 18 3.15 to 14 0.8 to 14 0.6 to 15.3 8A • 30 A • ADP1864 • ADP1829 Buck: 2.3 to 5.5; LDO: 1.7 to 5.5 ADP5041, 1 buck, 2 LDOs 0.8 to 3.8 SW: 1.2 A; LDO: 300, 300 ADP5040, 1 buck, 2 LDOs 0.8 to 3.8 Buck: 3.0 to 5.5 Buck: 2.3 to 5.5; LDO: 1.7 to 5.5 SW: 1.8 A SW: 1.2 A; LDO: 300, 300 ADP5135, 3 bucks 0.8 to 3.8 Buck: 2.3 to 5.5; LDO: 1.7 to 5.5 SW: 800, 800; LDO: 300, 300 ADP5037, 2 bucks, 2 LDOs 0.8 to 3.8 Buck: 2.3 to 5.5; LDO: 1.7 to 5.5 SW: 1.2 A, 1.2 A; LDO: 300, 300 ADP5134, 2 bucks, 2 LDOs 0.8 to 3.8 Buck: 2.3 to 5.5; LDO: 1.7 to 5.5 SW: 1.2 A, 1.2 A; LDO: 300 ADP5024, 2 bucks, 1 LDO 0.8 to 3.8 3.2 to 15 Buck: 2.3 to 5.5; LDO: 1.7 to 5.5 SW: 800, 800; LDO: 300 ADP5023, 2 bucks, 1 LDO 0.8 to 3.8 2.3 to 5.5 800 ADP2370 0.8 to 5.0 1000 ADP2504 2.8 to 5.0 2.3 to 5.5 2 outputs: 600, 300 ADP2140, 1 buck, 1 LDO 1.0 to 3.3 2.3 to 5.5 2.7 to 5.5 800 ADP2138 1.0 to 3.3 2.7 to 5.5 3000 ADP2118 0.8 to 3.3 2.3 to 5.5 4000 ADP2114 0.8 to 3.3 2.7 to 5.5 600 ADP2108 1.0 to 3.3 2.7 to 5.5 • 600 • 1500 • ADP2106 • ADP2102 1150 1200 <800 800 1.05 ADP1754, ADP1755 0.95 2000 200 ADP1752, ADP1753 •3 ADSP-21362/ADSP21363/ADSP-21364/ ADSP-21365/ADSP21366 Companion Power Selection Guide: SHARC Processors ADP1740, ADP1741 •3 •3 50 •3 •3 ADP1720 •3 •3 500 •3 • ADP1715 • • 1000 • • ADP1707 • • 1000 • •3 ADP1706  •3 • 2 outputs: 200, 200 • 1260 ADP220, 2 LDOs 1260 500 300 <500 1.26 ADP170 1.26 1.14 150 1.14 200 ADP160 150 200 ADSP-21261/ADSP21262/ADSP-21266 ADP151 Max IDDINT (mA) 500 Typical IDDINT (mA) ADP125 Max Voltage (V) 300 Min Voltage (V) ADP123 2000 1.2 to 3.3 2.7 to 5.5 SC ADP2107 1.2 to 3.3 1.6 to 3.6 0.75 to 2.5 1.6 to 3.6 0.75 to 2.5 1.6 to 3.6 0.75 to 3.0 4.0 to 28 2.5 to 5.5 2.5 to 5.5 0.75 to 3.3, with tracking 1.225 to 5.0 2.5 to 5.5 0.8 to 5.0 2.5 to 5.5 0.75 to 3.3, soft start 1.6 to 3.6 2.2 to 5.5 2.2 to 5.5 2.3 to 5.5 2.3 to 5.5 0.8 to 2.8 0.8 to 3.0 1.2 to 4.2 1.2 to 3.3 0.8 to 5.0 2.5 to 5.5 150 ADP121 Micro-PMUs Speed (MHz) ADSP-21487/ADSP21488/ADSP-21489 Other Domains Switching Regulators SHARC Processors ADSP-21477/ADSP21478/ADSP-21479 1 0.8 to 5.0 1.2 to 3.3 IOUT Max (mA) 1 VIN (V) 2 VOUT (V) Determine the peak current requirement for each rail of your processor by referring to the relevant data sheets and engineerto-engineer notes. The ADIsimPower design tool offers a complete set of features to create a complete BOM for all of these solutions. Visit www.analog.com/ADIsimPower. VDDINT Domain How to Use This Guide Part Number ADI power management products provide optimized power for Blackfin, SHARC, and microcontroller products—whether it’s a single processor or multiple processors, in handheld or high power applications, ADI has a solution to meet your needs. Linear Regulators 0.8 to 1.785 Companion Power Selection Guide: SHARC Processors • • • • • • 47 Online Tools and Resources In addition to providing world-class products and technical support, ADI takes great pride in offering design engineers the very best in online design tools. These tools have been specifically designed to provide power designers and nonpower designers alike the tools needed to design, optimize, and implement the very best power circuits available. Tools like the recently released ADIsimPower tool provide users with an easy four-step process using an intuitive graphical user interface via your Web browser. This particular tool allows the designer to preselect their key goals, whether they be cost, size, or performance, and optimizes the solution to meet those goals. Additional tools are available online (as Excel-based downloadable versions) that make product selection and design a snap. ADI puts the power back in your hands. Available Online Tools XX ADIsimPE: linear and mixed-signal circuit simulator XX ADIsimPower: part selection and design tool XX Parametric search tools for linear regulators, supervisors, and others XX Design and control tools for hot swap, digital power, and sequencers Other Power Brochures Available: XX High Performance LDOs XX Hot Swap and Power Monitoring XX Integrated Power Management Solutions XX Integrated Power Solutions for Xilinx FPGAs XX Integrated Power Solutions for Altera FPGAs XX Voltage Monitoring and Sequencing XX Digital Isolator Product Selection and Resource Guide External Trigger AD9680 ADP7104-3.3 ADC 14-Bit High Accuracy ADN4661 1 GSPS Buffer 500 mA LDO FMC Connector AD9523-1 Low Jitter Clock Generator ADC Inputs ADC Inputs DAC Outputs AD9144 DAC 16-Bit 25 GSPS 125 MHz Crystal DAC Outputs ADP1503 1.2 A LDO ADP2384 ADN4661 AD7291 ADP1753 Ultralow Noise 4 A Switcher Buffer 8-CH ADC 150 MA LDO ADP1740-1.2 2 A LDO Proven reference design. EngineerZone Online Support Community Find answers to your power management questions. Join our power management community at ez.analog.com. Analog Devices, Inc. Worldwide Headquarters Analog Devices, Inc. Europe Headquarters Analog Devices, Inc. Japan Headquarters Analog Devices, Inc. Asia Pacific Headquarters Analog Devices, Inc. One Technology Way P.O. Box 9106 Norwood, MA 02062-9106 U.S.A. Tel: 781.329.4700 (800.262.5643, U.S.A. only) Fax: 781.461.3113 Analog Devices, Inc. Wilhelm-Wagenfeld-Str. 6 80807 Munich Germany Tel: 49.89.76903.0 Fax: 49.89.76903.157 Analog Devices, KK New Pier Takeshiba South Tower Building 1-16-1 Kaigan, Minato-ku, Tokyo, 105-6891 Japan Tel: 813.5402.8200 Fax: 813.5402.1064 Analog Devices 5F, Sandhill Plaza 2290 Zuchongzhi Road Zhangjiang Hi-Tech Park Pudong New District Shanghai, China 201203 Tel: 86.21.2320.8000 Fax: 86.21.2320.8222 ©2016 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. Ahead of What’s Possible is a trademark of Analog Devices. Printed in the U.S.A. BR06616-.1-3/16(I) analog.com/power