Transcript
High-quality, Industrial Data Acquisition and Control I/O Products for PC-based Systems
PAC Products
Table of Contents Introduction Software
2
PISO-DA2U
30
3
PIO-DA4U/DA8U/DA16U
30
PISO-DA4U/DA8U/DA16U
30
PCI Express Bus Data Acquisition Boards Selection Guide
5
Contents
High-speed Multifunction Boards PCIe-813
7
PCIe-8620
8
PCIe-8622
9
PIO-D168U/D144U/D96U/D64U
> Software
10
30
PIO-D96SU/D48SU
30
PCI-TMC12AU
30
Memory Boards
PEX-1002L/1002H
11
PEX-DA4/DA8/DA16
12
Non-isolated Digital I/O Boards PEX-D144LS
13
PEX-D96S
14
PEX-D48
15
PEX-D24/D56
16
Isolated Digital I/O Boards PEX-P8R8i/P16R16i
17
PEX-P8POR8i/P16POR16i
18
PEX-P32C32/P32A32
19
PEX-730/730A
20
PEX-P64/P64-24V
21
PEX-C64
22
30
Isolated Digital I/O Boards PISO-1730U/P32C32U/P32C32U-5V
Analog Input/Output Boards
30
PIO-D48U/D56U/D24U
PCI-M512U
Multifunction Boards PEX-1202L/1202H
Non-isolated Digital I/O Boards
31
PISO-P32A32U/P32A32U-5V
31
PISO-P32S32WU
31
PISO-P64U/P64-24V
31
PISO-C64U/A64
31
PISO-730U/730U-5V
31
PISO-730A/730A-5V
32
PCI-P16C16U
32
PCI-P8R8U/P16R16U
32
PCI-P16POR16U
32
PISO-P8R8U/P8SSR8AC/P8SSR8DC
32
PISO-P16R16
32
PISO-725
32
ISA Bus Data Acquisition Boards Multifunction Boards
PCI Bus Data Acquisition Boards Selection Guide
23
High-speed Multifunction Boards PCI-2602U
25
High-speed Digital I/O Boards PCI-D64HU
27
Counter/Frequency Boards PCI-FC16U
28
Multifunction Boards
33
A-823PGL/823PGH
33
A-822PGL/822PGH
33
A-821PGL/821PGH
33
A-812PG/A-8111
33
Analog Input/Output Boards ISO-AD32L/AD32H
33
ISO-813
33
ISO-DA8/DA16
33
A-726/626/628
33
PCI-822LU/826LU
26
Isolated Digital I/O Boards
PCI-1800LU/1800HU
29
P16R16DIO/P8R8DIO
34
PCI-1802LU/1802HU
29
ISO-P32C32/P32S32W
34
PCI-1602U/1602FU
29
ISO-P64/C64
34
PCI-1202LU/1202HU
29
ISO-730
34
PIO-821LU/821HU
29
Non-isolated Digital I/O Boards
Analog Input/Output Boards
1
A-826PG
DIO-24/48/64
34
PCI-1002LU/1002HU
29
DIO-96/144
34
PISO-813U
29
TMC-10
34
ICP DAS CO., LTD.
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
● Introduction ICP DAS is the one-stop shopping location for a range of more than 170 high-quality industrial data acquisition and control products that can satisfy virtually any requirement. The ICP DAS range not only includes boards that support both the ISA and the PCI bus, but now also offers products that are compatible with the PCI Express (PCIe) standard. For each bus, a wide choice of Digital and/or Analog Input/Output boards is available.
ICP DAS I/O boards are renowned for their reliability, durability, usefulness and for the variety of features and support. In addition, using any Data Acquisition board becomes easier with the aid of the range of ICP DAS Daughterboards that make any system highly expandable.
Introduction
Digital I/O boards can be used in applications where logic signals need to be monitored and/or controlled, such as buttons, ON/ OFF switches, relays, or situations where high/low or open/close conditions exist, whereas Analog I/O boards can be used for the control and acquisition of real-world analog signals, such as current, voltage, temperature, sound, etc. Timer, counter and frequency boards are for used to measure pulse signals.
> Software
Casino Gaming i M Machine hi
Pharmaceutical Machine
Optical Lens Cutter
Dispensing Robot
Sorting Machine
LED Testingg & Sortingg
PCB Testing
Screw & Bolt Inspection
ICP DAS is a fast-growing provider of high-quality Industrial Data Acquisition Systems and Control Products. In addition to data acquisition and control boards, ICP DAS also provides a wide variety of products, such as Motion Control devices, Industrial Communication and Networking modules, and CAN Bus and FRnet Communication solutions, etc. ICP DAS is also focused on ODM/OEM services in the design, production and maintenance fields. ICP DAS works closely with all our customers, meaning that you can rely on us to satisfy your requirements for cost, quality and manufacturability.
OEM/ODM
PAC
I/O
PC
Card
Communication
PFN-2019
0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
[email protected]
Vol. IOC 2.06.06
2
PAC Products
● Software
Introduction
ICP DAS provides a full-featured Software Development Kit (SDK) together with reliable drivers for all I/O boards (AD, DA, DI, DO and Timer/Counter series), with support for a variety of operating systems, such as Linux, DOS, Windows 98/NT/2000, and 32 and 64-bit versions of Windows XP/Server 2003/Server 2008/7/Server 2012, as well as supporting Microsoft’s latest 32 and 64-bit versions of Windows 8. The Windows SDK for the I/O boards contains DLL (Dynamic Link Library) files, ActiveX (OCX) control components, and a large number of sample programs with source code written in Microsoft Visual C++, Visual Basic, Borland C++ Builder, Delphi, VB.NET, C#.NET and MATLAB. By using a combination of the SDK and the sample programs, complex hardware-register-based operations are no longer required, meaning that custom applications can be quickly and easily developed.
ActiveX Control (OCX)
Software
ActiveX Control (OCX) is a software component standard introduced by Microsoft to allow easy and user-friendly program development. Any OCX control can be inserted into an application so that the properties, methods and events provided by the object can be used to develop custom applications without needing to understand how it actually works. The ICP DAS OCX supports Windows 98/NT/2000 OCX and 32-bit Windows XP/Server 2003/Server 2008/7/Server 2012/8, and sample programs with source code are also provided for development environemtns such as VB, VC, Delphi, and BCB, etc. By integrating the ICP DAS OCX, developers from a variety of backgrounds or with different levels of expertise can add their individual creativity to a wide range of applications.
DOS Lib
DOS
DOS includes many valuable features for industrial control and measurement applications, such as high performance, stability, easy installation and deployment, etc. ICP DAS continues to support DOS-based systems by providing useful function libraries and a wide variety of C sample programs, including the source code, which can be freely modified and used as required.
Driver & SDK for Linux
Linux
The Linux operating system has been widely adopted in numerous industrial applications because of its stability, as well as the fact that it is open source and is free. The ICP DAS I/O Board driver for Linux supports x86 32-bit and 64-bit distributions for Linux Kernel 2.6.x to 3.x.x (for example, Fedora Core, Ubuntu and OpenSUSE etc.), and the SDK includes libraries and sample programs with source code. I/O control applications can easily be developed for Linux systems using the SDK and the GNU C Language.
Java I/O Driver
Java
Java technology is a write-once, run everywhere solution that features complete network support, making it an ideal solution for industry control projects. Java reduces the cost of development and maintenance, while satisfying the demands of time-to-market requirements. However, low-level I/ O access is not a standard implementation in Java. So in order to ensure our customers obtain the benefits of integrating Java technology into their solutions, ICP DAS has developed the Java I/O Driver
(JIOD) package.
DASYLab DASYLab is a popular and easy-to-use software package for data acquisition systems that is compatible with a wide range of interface options, providing connections to hardware such as RS-232, IEEE, USB, and Parallel ports, as well as the ISA and PCI bus interfaces, etc. A large variety of functional modules DASYLab for measurement and control are also supplied with DASYLab, meaning that it only takes a few minutes to create customized acquisition and analysis applications. Consequently, the most sophisticated data acquisition and control tasks can quickly be solved using DASYLab without the need for additional complex programming tools. To take advantage of this state-of-the-art software, ICP DAS has developed a series of drivers for PCI, ISA and DCON series products, allowing the easy integration of hardware and software into data acquisition, measurement and control systems.
3
ICP DAS CO., LTD.
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
LabVIEW
LabVIEW
LabVIEW delivers a graphical development environment that enables data acquisition, instrumentation and control systems to be quickly created, boosting productivity and reducing development time. An added advantage is that LabVIEW is scalable across multiple operating systems and includes hundreds of built-in libraries.
UniDAQ Driver & SDK for Windows
Software
UniDAQ is a uniform SDK interface that operates within the Windows Operating System environment, and is used to implement common data access functionality on ICP DAS I/O boards. UniDAQ supports the majority of I/O cards based on either the PCI or the Universal PCI bus as well as the PCI Express bus. The UniDAQ SDK makes it easy to integrate different kinds of I/O boards within the same system, upgrade to new hardware, expand the number of channels in an existing system, or develop numerous applications based on the various I/O boards.
Introduction
The LabVIEW toolkit can be used in conjunction with ICP DAS I/O series boards operating in a Windows 98/NT/2000 and 32/64bit Windows XP/Server 2003/Server 2008/7/Server 2012/8 environment. ICP DAS also provides an LLB Library together with sample programs, including the source code, meaning that hardware and software can easily be integrated in the LabVIEW graphical development environment to provide effective data acquisition, measurement and control solutions.
The UniDAQ SDK includes functions related to the Driver, Digital I/O, Interrupts, Analog I/O, Timer/Counter processes and Memory I/O, and supports both 32- and 64-bit Windows systems. Sample programs, including the source code, are also provided for a range of common programming languages, such as Microsoft Visual C++ 6.0, Microsoft Visual Basic 6.0, Borland Delphi 6.0, Borland C Builder++ 6.0, Microsoft Visual Basic.NET, Microsoft Visual C#.NET, LabVIEW and MATLAB.
Kernel Mode
User Mode Delphi UniDAQ (.dll)
UniDAQ Kernel Driver (.sys)
Hardware Abstraction Layer
VC++ VB.NET C# VB LabVIEW MATLAB AT A
System Service
BCB
Hardware
Suitable User
User situation Driver & SDK
Classic UniDAQ Driver & SDK
Classic Driver & SDK
Using an ICP DAS I/O board for the first time 64-bit Operating System Environment Currently using several types of ICP DAS PCI boards Currently using the Classic Driver & SDK and not wishing to amend the software Windows 95/98/NT Environment
[email protected]
Vol. IOC 2.06.06
4
PCI Express Bus Data Acquisition Boards High Speed Multifunction & Multifunction Boards Available soon PCIe-813
Model
NEW PCIe-8620
NEW PCIe-8622
PEX-1202L
PEX-1202H
Analog Input Isolation Voltage
2500 VDC (Bus-type)
3750 Vrms (Bus-type)
Resolution
-
16-bit
Channels
12-bit
SE
32
8
16
32
Diff.
-
-
-
16
Sampling Rate
1 MS/s
FIFO Size
110 kS/s
200 kS/s (Per Channel)
8K
2K
44 kS/s
2K
1K
Analog Output
PCI Express
Resolution
-
16-bit
12-bit
Channels
-
2
2
Non-isolated Digital Input/Output DI Channels
-
16 (5 V/TTL)
DO Channels
-
16 (5 V/TTL)
Isolated Digital Input/Output
Selection Guide
DI Channels
-
4
12
-
DO Channels
-
4
12
-
Isolation Voltage
-
2500 VDC
-
2500 VDC
Timer/Counter Channels
-
-
2
1
Page
7
8
9
10
Analog Input/Output Boards
Model
PEX-1002L
PEX-1002H
PEX-DA4
PEX-DA8
PEX-DA16
Analog Input Resolution Channels
12-bit
-
SE
32
-
Diff.
16
Sampling Rate
110 kS/s
44 kS/s
-
Analog Output Resolution
-
14-bit
14-bit
14-bit
Channels
-
4
8
16
Digital Input Channels Compatibility
16
16
16
16
5 V/TTL
5 V/TTL
5 V/TTL
5 V/TTL
16
16
16
16
5 V/TTL
5 V/TTL
5 V/TTL
5 V/TTL
-
3
3
3
Digital Output Channels Compatibility Timer/Counter Channels Page
5
ICP DAS CO., LTD.
11
12
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
Non-isolated Digital Input/Output Boards
Model
NEW PEX-D144S
NEW PEX-D96S
PEX-D56
PEX-D48
PEX-D24
144
96
24
48
24
-
-
16
-
-
5 V/CMOS
5 V/CMOS
5 V/TTL
5 V/TTL
5 V/TTL
-
-
16
-
-
5 V/CMOS
5 V/CMOS
5 V/TTL
5 V/TTL
5 V/TTL
2
-
Programmable DIO Channels Digital Input Channels Compatibility Digital Output Channels Compatibility
Channels
-
PCI Express
Timer/Counter
Connector 1
1
-
-
-
50-pin Header
1
-
-
1
-
37-pin D-Sub
-
-
1
1
1
20-pin Header
-
-
2
-
-
13
14
16
15
16
Page
Selection Guide
100-pin SCSI II
Isolated Digital Input/Output Boards PEX-P8R8i PEX-P8POR8i PEX-P16R16i PEX-P16POR16i
Model
PEX-P64
PEXP32C32
PEXP32A32
PEX-730
NEW PEX-730A
32
32
16
16
3750 Vrms
3750 Vrms
3750 Vrms
3750 Vrms
3750 Vrms
-
Optical
Optical
Photocoupler
-
0 ~ +1 V
0 ~ +1 V
0 ~ +1 V
-
-24V
PEX-C64
Digital Input Channels
8/16
Isolation Voltage Compatibility Input Voltage
8/16
3750 Vrms
2000 VDC
Photocoupler
Photocoupler
Photocoupler Photocoupler
Logic 0
AC/DC 0 ~ +1 V
0 ~ +1 V
Logic 1
AC/DC +5 ~ +24 V
+9 ~ +24 V
0 ~ +1 V
64
+9 ~ +24 V +9 ~ +24 V +9 ~ +24 V +5 ~ +15 V +20 ~ +28 V
-
-
Relay Output Channels Relay Type
8/16
8/16
-
4 SPDT, 4 SPST/ 8 SPDT, 8 SPST
PhotoMOS Relay (Form A)
-
Digital Output Channels
-
32
32
16
16
-
64
Isolation Voltage
-
3750 Vrms
3750 Vrms
3750 Vrms
3750 Vrms
-
3750 Vrms
Compatibility
-
Sink, Open Collector
Source, Open Sink, Open Collector Collector
Source, Open Collector
-
Sink, Open Collector
-
-
Non-isolation Digital Input/Output DI Channels
-
DO Channels Page
16 (5 V/TTL) 16 (5 V/TTL)
17
18
[email protected]
16 (5 V/TTL) 16 (5 V/TTL) 19
19
20
Vol. IOC 2.06.06
20
-
-
21
22
6
PCI Express Bus Data Acquisition Boards PCIe-813
Available soon
PCI Express, 1 MS/s High-speed, 16-bit, 32-channel Bus-isolated Analog Input Board
Features
►►►
PCI Express x1 Interface
Built-in MagicScan Controller
32-channel Single-ended Isolated Analog Input
Built-in DC/DC Converter with 3000 VDC Protection
16-bit, ADC with Max. 1 MS/s Sampling Rate
3750 Vrms Bus Isolation Protection
8192 Sample Hardware FIFO for Analog Input
AD Trigger: Software, Pacer, External
Programmable Gain Control: 0.4, 0.8, 1.6
High Performance DMA Data Transfer
Bipolar Input: ±10.24 V, ±5.12 V, ±2.56 V
Supports Card ID (SMD Switch)
Software
PCI Express
Introduction The PCIe-813 is a bus-type isolated 16-bit AD board that supports the PCI Express bus and provides 32 single-ended 16-bit Analog Input channels with an 8 k Sample hardware FIFO. Analog Input sampling rates of up to 1 MS/s can be achieved, and the board also includes DMA channels that allow the streaming of Analog Input data without significantly impacting processor resources. The isolation range of the board has been increased to 3750 Vrms, making it the most cost-effective solutions when considering isolated AD boards.
High-speed Multifunction Boards > PCIe-813
The PCIe-813 board provides a variety of programmable trigger methods, including software and pacer, as well as external triggers that include Post, Pre, Middle, Delay and Analog triggers. Even in channel scan mode, a different gain code can be used for each channel, and a total sampling rate of 1 MS/s can still be achieved, making the PCIe-813 board well-suited to the demands of high-end applications. Synchronization of the data acquisition process relative to an external event is an important criterion in many applications.
Drivers 32-bit Windows XP/2003/2008/7/8/10 64-bit Windows XP/2003/2008/7/8/10
Sample Programs LabVIEW Toolkit VB/VC/Delphi/BCB/MATLAB Demo VB.NET/C#.NET/VC.NET Demo
Hardware Specifications
Pin Assignments
Analog Input Isolation Voltage
Pin Assignment
3750 Vrms (Bus-type)
Terminal No.
Channels
32 Single-ended
AD Converter
16-bit, 1 μs conversion time
Sampling Rate
1 MS/s
AI 0
01
FIFO Size
8192 Samples
AI 2
02
Over voltage Protection
Continuous +/-35 Vp-p
AI 4
03
Input Impedance
10,000 MΩ/6 pF
AI 6
04
Trigger Modes
Software, Pacer, External
AI 8
05
Data Transfer
Polling, Interrupt, DMA
AI 10
06
Accuracy
0.05% of FSR ±1 LSB @ 25°C, ± 10.24 V
AI 12
07
Input Range
Gain: 0.4, 0.8, 1.6, Bipolar Range: ±10.24 V, ±5.12 V, ±2.56 V
AI 14
08
A_GND
09
PCI Express x1
A_GND
10
Card ID
Yes (4-bit)
AI 16
11
Connectors
Female DB37 x 1
AI 18
12
Power Consumption
1 A @ +5 V (Max.)
AI 20
13
Operating Temperature
0°C to +60°C
Humidity
5 to 85% RH, Non-condensing
AI 22
14
AI 24
15
AI 26
16
AI 28
17
AI 30
18
A_GND
19
General Bus Type
Ordering Information PCIe-813 CR
PCI Express, 1 MS/s High-speed, 16-bit, 32-ch Bus-isolated Analog Input Board (RoHS). Includes one CA-4002 D-sub Connector.
PCIe-813/S CR
PCIe-813 CR with DN-37 Daughterboard. Includes one CA-4002 D-sub Connector.
Pin Assignment
20
AI 1
21
AI 3
22
AI 5
23
AI 7
24
AI 9
25
AI 11
26
AI 13
27
AI 15
28
A_GND
29
Ext_Trg
30
AI 17
31
AI 19
32
AI 21
33
AI 23
34
AI 25
35
AI 27
36
AI 29
37
AI 31
CON1
Accessories
7
CA-3710DM
DB-37 Male-Male Cable, 1.0 m, 180° (RoHS)
DB-37
Screw Terminal for I/O Boards that use a 37-pin D-sub Connector
CA-4002
37-pin Male D-sub Connector with Plastic Cover
DN-37
DIN-Rail Mountable 37-pin D-sub Connector Board
ICP DAS CO., LTD.
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
PCIe-8620
NEW
Available soon
PCI Express, 200 kS/s High-speed, 16-bit, 8-channel Simultaneously Sampled Analog Input Board with 4-channel Isolated DI/O
Features
Introduction
PCIe-8620 also includes a second-order anti-alias analog filter where the -3 dB frequency for the ±5 V input range is typically 15 kHz, and is typically 23 kHz for the ±10 V input range.
PCI Express x1 Interface, Full-profile or Low-profile
4-channel Isolated Digital Input
4-channel Isolated Digital Output
8 Single-ended Analog Input Channels
Synchronous Sample and Hold
Analog Input Range: ±10 V, ±5 V
16-bit, 200 kS/s Sampling Rate for each channel
Hardware FIFO for Analog Input with a total of 2048 Samples
Built-in MagicScan Controller
Software
High-speed Multifunction Boards > PCIe-8620
The PCIe-8620 is a low-profile PCI Express board that is suitable for computers with limited space, and is also suitable for standard-size computers since the board is shipped with both full-height and low-profile brackets.
PCI Express
The PCIe-8620 is a bus-type, isolated high-speed Analog Input board with isolated DI/O. The simultaneously sampled AD offers a mix of up to 8 single-ended 16-bit Analog Input channels with a 2 k Sample hardware FIFO. All channels feature a programmable input range of ±10 V or ±5 V with a sampling rate up to 200 kS/s per channel. The PCIe-8620 provides 4 isolated Digital Input channels and 4 isolated Digital Output channels. The isolation range of the board has been increased to 2500 VDC, making it one of the most cost-effective solutions when considering isolated AD with DI/O boards.
►►►
Drivers 32/64-bit Windows XP/2003/2008/7/8/10
Sample Programs VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo Full-height Bracket
Low-profile Bracket
Hardware Specifications
Pin Assignments
Analog Input
Terminal No.
Pin Assignment
AI 0
01
AI 1
02
AI 2
03
AI 3
04
AI 4
05
AI 5
06
AI 6
07
AI 7
08
D_GND
09
DI 1
10
DI 3
11
DO 1
12
DO 3
13
Pin Assignment
Isolation Voltage
2500 VDC (Bus-type)
Channels
8 Single-ended
Resolution
16-bit
Sampling Rate
200 kS/s (Each Channel)
Bipolar Input
±10 V, ±5 V
14
A_GND
15
A_GND
16
A_GND
17
A_GND
18
A_GND
19
A_GND
Digital Output
20
A_GND
Channels
4
21
D_GND
Isolation Voltage
2500 VDC
22
DI 0
General
23
DI 2
Bus Type
24
DO 0
25
DO 2
CON1
FIFO Size
2 k Samples (Total)
Accuracy
0.05% of FSR ±1 LSB @ 25°C, ±10 V
Digital Input Channels
4
Isolation Voltage
2500 VDC
PCI Express x1
Card ID
Yes (4-bit)
Connectors
Female DB25 x 1
Dimensions (L x W x D)
Full-profile: 107 mm x 120 mm x 22 mm Low-profile: 107 mm x 80 mm x 22 mm
Operating Temperature
0°C to +60°C
Humidity
5 to 85% RH, Non-condensing
Accessories
Ordering Information
PCIe-8620 CR
PCI Express, 200 kS/s, 16-bit, 8-ch Simultaneously Sampled Analog Input Board and 4-ch Isolated DI/ O (RoHS). Includes one CA-PC25M D-sub Connector and one Low-profile Bracket.
[email protected]
CA-2520
25-pin D-sub Cable, 2.0 m
DN-25 CR
DIN-Rail Mountable I/O Connector Block with 25/9pin D-sub Connector (RoHS) Include: CA-0920 Cable x 1 and CA-2520 Cable x 1
Vol. IOC 2.06.06
8
PAC Products
PCIe-8622
NEW
Available soon
PCI Express, 200 kS/s High-speed, 16-bit, 16-channel Simultaneously Sampled Analog Input Board with 12-channel Isolated DI/O
Features
Introduction The PCIe-8622 is a bus-type, isolated high-speed AD multifunction board with 16-bit DA and isolated DI/O. The simultaneously sampled AD offers a mix of up to 16 single-ended, 16-bit Analog Input channels with a 2 k Sample hardware FIFO and 2500 VDC bus-typed isolation protection. All channels feature a programmable input range of ±10 V or ±5 V with a sampling rate up to 200 kS/s per channel.
PCI Express
The PCIe-8622 supports the PCI Express bus and provides 12 isolated Digital Input channels, 12 isolated Digital Output channels and 2 Analog Output channels at 16-bit resolution. The board has a single high-density connector that reduces the amount of space required for installation.
PCI Express x1 Interface, Full-profile
12-channel Isolated Digital Input
12-channel Isolated Digital Output
2-channel 16-bit Analog Output
16 Single-ended Analog Input Channels
Synchronous Sample and Hold
Analog Input Range: ±10 V, ±5 V
16-bit, 200 kS/s Sampling Rate for each Channel
Hardware FIFO for Analog Input with a total of 2048 Samples
Pin Assignments
►►►
Built-in MagicScan Controller
Software
High-speed Multifunction Boards > PCIe-8622
Terminal No. Pin Assignment
Pin Assignment
Drivers 32/64-bit Windows XP/2003/2008/7/8/10
Output +5 V
01
35
Output +15 V
CNT1_GATE
02
36
CNT0_GATE
CNT1_OUT
03 04
37 38
CNT0_OUT
CNT1_CLK D_GND
05
39
D_GND
DO 11
06
40
DO 9
07
41
DO 10 DO 8
DO 7
08
42
DO 6
Analog Input
DO 5
09
43
DO 4
Isolation Voltage
2500 VDC (Bus-type)
DO 3
10
44
DO 2
Channels
16 Single-ended
DO 1
11
45
DO 0
Resolution
16-bit
DI 11
12
46
DI 10
Sampling Rate
200 kS/s (Each Channel)
DI 9
13
47
DI 8
Bipolar Input
±10 V, ±5 V
D_GND
14
48
D_GND
FIFO Size
2 k Samples (Total)
DI 7
15
49
DI 6
16
DI 4
0.05% of FSR ±1 LSB @ 25°C, ±10 V
DI 5
50
Accuracy
DI 3
17
51
DI 2
DI 1
18
52
DI 0
N.C. AI_CONV
19 20
53
N.C.
54
N.C.
DTRG1
21
55
DTRG0
A_GND
22
56
A_GND
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo
CNT0_CLK
Hardware Specifications
Analog Output Channels
2
Resolution
16-bit
Output Range
±5 V, ±10 V
Digital Input Channels
12
Isolation Voltage
2500 VDC
A_GND
23
57
A_GND
AO 1
24
58
AO 0
A_GND
25
59
A_GND
Channels
12
A_GND
26
60
A_GND
Isolation Voltage
2500 VDC
AI 15
27
61
AI 14
Timer/Counter
AI 13
28
62
AI 12
Channels
AI 11
29
63
AI 10
General
AI 9
30
64
AI 8
Bus Type
AI 7
31
65
AI 6
Card ID
Yes (4-bit)
AI 5
32
66
AI 4
Connectors
68-pin Female SCSI II x 1
AI 3
33
67
AI 2
125 mm x 120 mm x 22 mm
34
68
AI 0
Dimensions (L x W x D)
AI 1
Operating Temperature
0°C to +60°C
Humidity
5 to 85% RH, Non-condensing
CON1
Ordering Information PCIe-8622 CR
9
Sample Programs
PCI Express, 200 kS/s, 16-bit, 16-ch Simultaneously Sampled Analog Input Board, with 2-ch 16-bit Analog Output and 12-ch Isolated DI/O (RoHS).
ICP DAS CO., LTD.
Digital Output
2 PCI Express x1
Accessories CA-SCSI15-H
68-pin SCSI-II Connector Cable, 1.5 m
DN-68A CR
DIN-Rail Mountable I/O Connector Block with 68pin Female SCSI II Connector (RoHS).
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
PEX-1202H/PEX-1202L
NEW
PCI Express, 32-channel, 12-bit, 44 kS/s or 110 kS/s Multifunction (1 K word FIFO) Board
Features
Introduction The PEX-1202L/H series utilizes the PCI Express bus and is designed as an easy replacement for the PCI-1202 series without requiring any modification to either the software or the driver.
The PEX-1202L/H includes a Card ID switch that enables the board to be easily recognized via software if two or more cards are installed in the same computer. The pull-high/low jumpers allow the DI status to be predefined instead of remaining floating if the DI channels are disconnected or line broken.
Drivers 32/64-bit Windows XP/2003/2008/7/8/10
Linux
16-channel 5 V/TTL Digital Input
16-channel 5 V/TTL Digital Output
Pull-high/Pull-low Jumpers for DI Channels
12-bit, 32 Single-ended/16 Differential Analog Input channels
Three External Triggers: Pre-trigger, Middle-trigger, Post-trigger
110 kS/s or 44 kS/s AD Sampling Rate
Supports Card ID (SMD Switch)
Hardware Specifications Model
PEX-1202L
PEX-1202H
Analog Input Channels
32 Single-ended/16 Differential
Resolution
12-bit, 8.5 μs Conversion Time
FIFO Size
1024 Samples
Accuracy
0.1% of FSR ±1 LSB @ 25°C, ±10 V
Sampling Rate
110 kS/s (Low-Gain)
44 kS/s (High-Gain)
Analog Output
Sample Programs DOS Lib and TC/BC/MSC Demo
PCI Express x1 Interface
LabVIEW Toolkit
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo
Channels
2
Resolution
12-bit
Accuracy
0.06% of FSR ±1 LSB @ 25°C, ±10 V
Output Range
±5 V, ±10 V
Digital Input
Pin Assignments Pin Assignment
Terminal No.
AI 0
01
AI 1
02
AI 2
03
AI 3
04
AI 4
05
AI 5
06
AI 6
07
AI 7
08
AI 8
09
AI 9
10
AI 10
11
AI 11
12
AI 12
13
AI 13
14
AI 14
15
AI 15
16
A_GND
17
Da1 out
18
Ext_Trg
19
Pin Assignment
Pin Assignment
20
AI 16
21
AI 17
22
AI 18
23
AI 19
24
AI 20
25
AI 21
26
AI 22
27
AI 23
28
AI 24
29
AI 25
30
AI 26
31
AI 27
32
AI 28
33
AI 29
34
AI 30
35
AI 31
36
Da2 out
37
D_GND
DO 0 DO 2 DO 4 DO 6 DO 8 DO 10 DO 12 DO 14 GND +5 V
Terminal No. 01 03 05 07 09 10 12 14 16 18
02 04 06 08 10 12 14 16 18 20
DI 0 DI 2 DI 4 DI 6 DI 8 DI 10 DI 12 DI 14 GND +5 V
CON3
5 V/TTL
Input Voltage
Logic 0: 0.8 V Max., Logic 1: 2.0 V Min.
Response Speed
500 kHz (Typical)
DO 1 DO 3 DO 5 DO 7 DO 9 DO 11 DO 13 DO 15 GND +12 V
Channels
16
Compatibility
5 V/CMOS
Digital Output
Output Voltage
Logic 0: 0.1 V Max., Logic 1: 4.4 V Min.
Output Capability
Sink: 6 mA @ 0.33 V, Source: 6 mA @ 4.77 V
Response Speed
500 kHz (Typical)
Timer/Counter Channels
1
Resolution
16-bit
General Bus Type
Terminal No. 01 03 05 07 09 11 13 15 17 19
16
Compatibility Pin Assignment
CON1 Pin Assignment
Channels
02 04 06 08 10 12 14 16 18 20
Pin Assignment DI 1 DI 3 DI 5 DI 7 DI 9 DI 11 DI 13 DI 15 GND +12 V
CON2
Ordering Information PEX-1202L CR
PCI Express, 32-ch, 12-bit, 110 kS/s. Low Gain Multifunction Board (RoHS). Includes one CA-4002 D-sub Connector.
PEX-1202H CR
PCI Express, 32-ch, 12-bit, 44 kS/s. High Gain Multifunction Board (RoHS). Includes one CA-4002 D-sub Connector.
[email protected]
Multifunction Boards > PEX-1202L/PEX-1202H
Software
PCI Express
The PEX-1202L/H provides 32 single-ended or 16 differential Analog Input channels at 12-bit resolution, together with 16 TTL Digital Input and 16 TTL Digital Output channels. Data acquisition under DOS is gap-free and continuous, at 110 kHz for low gain and 44 kHz for high gain. The PEX1202L/H also features "Magic Scan" and Continuous Capture functions.
►►►
PCI Express x1
Card ID
Yes (4-bit)
Connectors
Female DB37 x 1, 20-pin Box Header x 2
Power Consumption
300 mA @ +5 V
Operating Temperature
0°C to +60°C
Humidity
5 to 85% RH, Non-condensing
Accessories CA-2010
20-pin Flat Cable, 1 m
CA-4002
37-pin Male D-sub Connector with Plastic Cover
CA-3710DM
DB-37 Male-Male Cable, 1 m, 180° (RoHS)
CA-3730DM
DB-37 Male-Male Cable, 3 m, 180° (RoHS)
DB-1825
Analog Input Screw Terminal Board
DN-20
DIN-Rail Mountable 20-pin D-sub Connector Board
DN-37
DIN-Rail Mountable 37-pin D-sub Connector Board
Vol. IOC 2.06.06
10
PAC Products
PEX-1002H/PEX-1002L PCI Express, 32-channel, 12-bit, 44 kS/s or 110 kS/s Analog Input Board
Features
Introduction ion
►►►
The PEX-1002L/H series utilizes the PCI Express bus and is designed as an easy replacement for the PCI-1002 series without requiring any modification to either the software or the driver.
PCI Express
PCI Express x1 Interface
16-channel 5 V/TTL Digital Input
16-channel 5 V/TTL Digital Output
Pull-high/Pull-low Jumpers for DI Channels
12-bit, 32 Single-ended/16 Differential Analog Input Channels
Internal/External Trigger
110 or 44 kS/s AD Sampling Rate
Supports Card ID (SMD Switch)
The PEX-1002L/H provides 32 single-ended or 16 differential Analog Input channels at 12-bit resolution, together with 16 TTL Digital Input and 16 TTL Digital Output channels. The PEX-1002L/H includes a Card ID switch that enables the board to be easily recognized via software if two or more cards are installed in the same computer. The pull-high/low jumpers allow the DI status to be predefined instead of remaining floating if the DI channels are disconnected or line broken.
Software Drivers
Analog Input Boards > PEX-1002L/PEX-1002H
32/64-bit Windows XP/2003/2008/7/8/10
Hardware Specifications
Linux
Model
Sample Programs DOS Lib and TC/BC/MSC Demo
LabVIEW Toolkit
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo
Pin Assignments Pin Assignment
Terminal No.
AI 0
01
AI 1
02
AI 2
03
AI 3
04
AI 4
05
AI 5
06
AI 6
07
AI 7
08
AI 8
09
AI 9
10
AI 10
11
AI 11
12
AI 12
13
AI 13
14
AI 14
15
AI 15
16
A_GND
17
N.C.
18
Ext_Trg
19
Pin Assignment
20
AI 16
21
AI 17
22
AI 18
23
AI 19
24
AI 20
25
AI 21
26
AI 22
27
AI 23
28
AI 24
29
AI 25
30
AI 26
31
AI 27
32
AI 28
33
AI 29
34
AI 30
35
AI 31
36
N.C.
37
D_GND
Pin Assignment DO 0 DO 2 DO 4 DO 6 DO 8 DO 10 DO 12 DO 14 GND +5 V
Terminal No. 01 03 05 07 09 10 12 14 16 18
02 04 06 08 10 12 14 16 18 20
Pin Assignment DO 1 DO 3 DO 5 DO 7 DO 9 DO 11 DO 13 DO 15 GND +12 V
CON1 Pin Assignment
Channels
32 Single-ended/16 Differential
Resolution
12-bit, 8 μs Conversion Time
Accuracy
0.01% of FSR ±2 LSB @ 25°C, ±10 V
Sampling Rate
110 kS/s (Low-Gain)
44 kS/s (High-Gain)
DI 0 DI 2 DI 4 DI 6 DI 8 DI 10 DI 12 DI 14 GND +5 V
16
Compatibility
5 V/TTL
Input Voltage
Logic 0: 0.8 V Max. Logic 1: 2.0 V Min.
Response Speed
500 kHz (Typical)
Digital Output Channels
16
Compatibility
5 V/TTL
Output Voltage Output Capability Response Speed
Terminal No. 01 03 05 07 09 11 13 15 17 19
Channels
02 04 06 08 10 12 14 16 18 20
Logic 0: 0.4 V Max. Logic 1: 2.4 V Min. Sink: 2.4 mA @ 0.8 V Source: 0.8 mA @ 2.0 V 500 kHz (Typical)
Pin Assignment
General
DI 1 DI 3 DI 5 DI 7 DI 9 DI 11 DI 13 DI 15 GND +12 V
Card ID
Yes (4-bit)
Connectors
Female DB37 x 1, 20-pin Box Header x 2
Power Consumption
800 mA @ +5 V
CON2
Ordering Information PEX-1002L CR
PCI Express, 32-ch, 12-bit, 110 kS/s. Low Gain Analog Input Board (RoHS). Includes one CA-4002 D-sub Connector.
PEX-1002H CR
PCI Express, 32-ch, 12-bit, 44 kS/s. High Gain Analog Input Board (RoHS). Includes one CA-4002 D-sub Connector.
ICP DAS CO., LTD.
PEX-1002H
Digital Input
CON3
11
PEX-1002L
Analog Input
Bus Type
PCI Express x1
Operating Temperature
0°C to +60°C
Humidity
5 to 85% RH, Non-condensing
Accessories CA-2010
20-pin Flat Cable, 1 m
CA-4002
37-pin Male D-sub Connector with Plastic Cover
CA-3710DM
DB-37 Male-Male Cable, 1 m, 180° (RoHS)
CA-3730DM
DB-37 Male-Male Cable, 3 m, 180° (RoHS)
DB-1825
Analog Input Screw Terminal Board
DN-20
DIN-Rail Mountable 20-pin D-sub Connector Board
DN-37
DIN-Rail Mountable 37-pin D-sub Connector Board
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
PEX-DA4/PEX-DA8/PEX-DA16
NEW
PCI Express, 14-bit, 4/8/16-channel Analog Output Board
Features
Introduction The PEX-DA4/DA8/DA16 series Analog Output boards utilize the PCI Express interface, and are equipped with 4, 8, or 16 Analog Output channels at 14-bit resolution with each DA channel featuring a doublebuffered latch. The voltage output for the PEX-DA series can range from -10 V to +10 V, and the current output range can be from 0 to 20 mA. In addition, the PEXDA series also provides the following advantages:
PCI Express x1 Interface
Supports Card ID (SMD Switch)
16-channel 5 V/TTL Digital Input
16-channel 5 V/CMOS Digital Output
Pull-high/Pull-low Jumpers for DI Channels
4, 8 or 16-channel 14-bit Analog Output
Voltage Output: ±10 V
Current Output: 0 ~ +20 mA (sink)
Double-buffered DA Latch
2. Individual channel configuration: Each channel can be individually configured as either voltage or current output.
The PEX-DA series is designed as an easy replacement for the PIO-DA series without requiring any modification to either the software or the driver.
Hardware Specifications Model
Software Drivers 32/64-bit Windows XP/2003/2008/7/8/10
Sample Programs DOS Lib and TC/BC/MSC Demo
PEX-DA4
PEX-DA8
PEX-DA16
Channels
4
8
16
Resolution
14-bit
Accuracy
0.01% of FSR ±2 LSB @ 25°C, ±10 V
Output Range
±10 V, 0 ~ +20 mA
Output Driving
±5 mA
Digital Input Channels
16
Compatibility
5 V/TTL
Input Voltage
Logic 0: 0.8 V Max., Logic 1: 2.0 V Min.
Response Speed
200 kHz (Typical)
Digital Output
Pin Assignments Pin Assignment
Terminal No.
VO 0
01
VO 1
02
VO 2
03
VO 3
04
A_GND
05
VO 4
06
VO 5
07
VO 6
08
Channels
16
VO 7
09
Compatibility
5 V/CMOS
A_GND
10
Output Voltage
Logic 0: 0.1 V Max., Logic 1: 4.4 V Min.
VO 8
11
Output Capability
Sink: 6 mA @ 0.33 V, Source: 6 mA @ 4.77 V
VO 9
12
Response Speed
200 kHz (Typical)
VO 10
13
VO 11
14
A_GND
15
VO 12
16
VO 13
17
VO 14
18
VO 15
19
Timer/Counter 3
Resolution
16-bit
General Bus Type
LabVIEW Toolkit
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo
Analog Output
Channels
PCI Express x1
Card ID
Yes (4-bit)
Connectors
Female DB37 x 1, 20-pin Box Header x 2
Power Consumption
600 mA @ +5 V 800 mA @ +5 V
1400 mA @ +5 V
Pin Assignment
20
IO 0
21
IO 1
22
IO 2
23
IO 3
24
N.C.
25
IO 4
26
IO 5
27
IO 6
28
IO 7
29
N.C.
30
IO 8
31
IO 9
32
IO 10
33
IO 11
34
IO 12
35
IO 13
36
IO 14
37
IO 15
CON3
Pin Assignment DO 0 DO 2 DO 4 DO 6 DO 8 DO 10 DO 12 DO 14 GND +5 V
5 to 85% RH, Non-condensing
Ordering Information PEX-DA4 CR
PCI Express, 4-ch Analog Output Board (RoHS). Includes one CA-4002 D-sub Connector.
PEX-DA8 CR
PCI Express, 8-ch Analog Output Board (RoHS). Includes one CA-4002 D-sub Connector.
PEX-DA16 CR
PCI Express, 16-ch Analog Output board (RoHS). Includes one CA-4002 D-sub Connector.
[email protected]
Terminal No. 01 03 05 07 09 11 13 15 17 19
02 04 06 08 10 12 14 16 18 20
Pin Assignment DO 1 DO 3 DO 5 DO 7 DO 9 DO 11 DO 13 DO 15 GND +12 V
CON1 Pin Assignment DI 0 DI 2 DI 4 DI 6 DI 8 DI 10 DI 12 DI 14 GND +5 V
Terminal No. 01 03 05 07 09 10 12 14 16 18
02 04 06 08 10 12 14 16 18 20
Pin Assignment DI 1 DI 3 DI 5 DI 7 DI 9 DI 11 DI 13 DI 15 GND +12 V
CON2
Operating Temperature 0°C to +60°C Humidity
Linux
Analog Output Boards > PEX-DA4/PEX-DA8/PEX-DA16
3. Card ID: The PEX-DA series includes a Card ID switch that enables the board to be easily recognized via software if two or more cards are installed in the same computer.
PCI Express
1. Accurate and easy-to-use calibration: ICP DAS provides a software calibration function, meaning that jumpers and trimpots are no longer required. The calibration data is saved in EEPROM for long-term use.
►►►
Accessories CA-2010
20-pin Flat Cable, 1 m
CA-4002
37-pin Male D-sub Connector with Plastic Cover
CA-3710DM
DB-37 Male-Male Cable, 1 m, 180° (RoHS)
CA-3730DM
DB-37 Male-Male Cable, 3 m, 180° (RoHS)
DN-37
DIN-Rail Mountable 37-pin D-sub Connector Board
Vol. IOC 2.06.06
12
PAC Products
PEX-D144LS
NEW
PCI Express, 144-channel Digital I/O Board with SCSI-II Connector
Features
Introduction The PEX-D144LS board utilizes the PCI Express bus and is designed as an easy replacement for the PIO-D144U/D144LU series without requiring any modification to either the software or the driver.
PCI Express
The PEX-D144LS provides a high-density connector and a 50-pin box header that dramatically reduces the amount of installation space required for the card in the computer. It supports 144 low-heating CMOS Digital I/O lines that consist of eighteen 8-bit bi-directional ports: port A (PA), port B (PB) and port C (PC). All ports are configured as input mode during poweron or after a reset.
PCI Express x1 Interface
Supports Card ID (SMD Switch)
Pull-high/Pull-low Jumpers for DI Channels
Four Interrupt Sources
144 Buffered CMOS Digital Input/Output Lines
Eighteen 8-bit Bi-directional I/O Ports
Supports DO Status Readback (Register Level)
DI/O Response Time approximately 2 μs (500 kHz Max.)
The PEX-D144LS also includes an onboard Card ID that enables the board to be easily recognized via software if two or more cards are installed in the same computer.
Pin Assignments
Non-isolated Digital I/O Boards > PEX-D144LS
Pin Assignment
Software Drivers
Terminal No.
01
51
PA 10
PA 1
02
52
PA 11
PA 2
03
53
PA 12
PA 3
04
54
PA 13
PA 4
05
55
PA 14
PA 5
06
56
PA 15
PA 6
07
57
PA 16
PA 7
08
58
PA 17
PB 0
09
59
PB 10
PB 1
10
60
PB 11
PB 2
11
61
PB 12
PB 3
12
62
PB 13
PB 4
13
63
PB 14
PB 5
14
64
PB 15
PB 6
15
65
PB 16
PB 7
16
66
PB 17
PC 0
17
67
PC 10
PC 1
18
68
PC 11
PC 2
19
69
PC 12
PC 3
20
70
PC 13
PC 4
21
71
PC 14
5 V/CMOS
PC 5
22
72
PC 15
PC 6
23
73
PC 16
Input Voltage
Logic 0: 0.8 V Max., Logic 1: 2.0 V Min.
PC 7
24
74
PC 17
GND
25
75
GND
Response Speed
500 kHz
PA 20
26
76
PA 30
PA 21
27
77
PA 31
PA 22
28
78
PA 32
PA 23
29
79
PA 33
PA 24
30
80
PA 34
PA 25
31
81
PA 35
PA 26
32
82
PA 36
PA 27
33
83
PA 37
PB 20
34
84
PB 30
PB 21
35
85
PB 31
PB 22
36
86
PB 32
PB 23 PB 24
37 38
87
PB 33
88
PB 34
32/64-bit Windows XP/2003/2008/7/8/10
Linux
Sample Programs DOS Lib and TC/BC/MSC Demo
LabVIEW Toolkit
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo
Hardware Specifications Programmable DIO Channels
144
Digital Input Compatibility
Digital Output
Output Voltage Output Capability Response Speed
5 V/CMOS Logic 0: 0.1 V Max., Logic 1: 4.4 V Min. Sink: 6 mA @ 0.33 V, Source: 6 mA @ 4.77 V 500 kHz
General Bus Type
PCI Express x1
PB 25
39
89
PB 35
PB 26
40
Card ID
Yes (4-bit)
90
PB 36
PB 27
41
91
PB 37
PC 20
42
92
PC 30
PC 21
43
93
PC 31
PC 22
44
94
PC 32
PC 23
45
95
PC 33
PC 24
46
96
PC 34
PC 25
47
97
PC 35
PC 26
48
PC 27
49
98 99
PC 36 PC 37
+5 V
50
100
+5 V
Connectors Power Consumption Operating Temperature Humidity
100-pin Female SCSI II x 1, 50-pin Box Header x 1 600 mA @ +5 V 0°C to +60°C 5 to 85% RH, Non-condensing
Accessories
GND PA 40 PA 41 PA 42 PA 43 PA 44 PA 45 PA 46 PA 47 PB 40 PB 41 PB 42 PB 43 PB 44 PB 45 PB 46 PB 47 PC 40 PC 41 PC 42 PC 43 PC 44 PC 45 PC 46 PC 47
Pin Assignment
Terminal No. 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49
02 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50
+5 V PA 50 PA 51 PA 52 PA 53 PA 54 PA 55 PA 56 PA 57 PB 50 PB 51 PB 52 PB 53 PB 54 PB 55 PB 56 PB 57 PC 50 PC 51 PC 52 PC 53 PC 54 PC 55 PC 56 PC 57
CON2
CON1
DN-100 CR
DIN-Rail Mountable I/O Connector Block with 100-pin Female SCSI II Connector (RoHS)
CA-SCSI100-15
100-pin SCSI II and 100-pin Male Connector Cable, 1.5 m
DN-100-CA CR
DN-100 CR Daughterboard. Include one CASCSI100-15 Cable
ICP DAS CO., LTD.
Pin Assignment
Pin Assignment
PA 0
Compatibility
13
►►►
Ordering Information PEX-D144LS CR
PCI Express, 144-ch Digital I/O Board with SCSI-II Connector (RoHS).
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
PEX-D96S
NEW
PCI Express, 96-channel Digital I/O Board with SCSI-II Connector
Features
►►►
PCI Express x1 Interface
96 Buffered CMOS Digital Input/Output Lines
Supports Card ID (SMD Switch)
Twelve 8-bit Bi-directional I/O Ports
Four Interrupt Sources
Supports DO Status Readback (Register Level)
Pull-high/Pull-low Jumpers for DI Channels
DI/O Response Time approximately 2 μs (500 kHz Max.)
Introduction
The PEX-D96S provides a single high-density connector that dramatically reduces the amount of installation space required for the card in the computer. It supports 96 low-heating CMOS Digital I/O lines that consist of twelve 8-bit bi-directional ports: port A (PA), port B (PB) and port C (PC). All ports are configured as input mode during power-on or after a reset.
SCSI-II Cabling
Programmable DIO Channels
Software
Pin Assignment
96
64-bit Windows XP/2003/2008/7/8/10 Linux
01
51
PA 10
PA 1
02
52
PA 11
Compatibility
5 V/CMOS
PA 2
03
53
PA 12
PA 3
04
54
PA 13
Input Voltage
Logic 0: 0.8 V Max. Logic 1: 2.0 V Min.
PA 4
05
55
PA 14
PA 5
06
56
PA 15
PA 6
07
57
PA 16
500 kHz
PA 7
08
58
PA 17
PB 0
09
59
PB 10
PB 1
10
60
PB 11
PB 2
11
61
PB 12
PB 3
12
62
PB 13
PB 4
13
63
PB 14
PB 5
14
64
PB 15
PB 6
15
65
PB 16
PB 7
16
66
PB 17
PC 0
17
67
PC 10
PC 1
18
68
PC 11
PC 2
19
69
PC 12
PC 3
20
70
PC 13
PC 4
21
71
PC 14
PC 5
22
72
PC 15
PC 6
23
73
PC 16
PC 7
24
74
PC 17
GND
25
75
GND
PA 20
26
76
PA 30
PA 21
27
77
PA 31
PA 22
28
78
PA 32
PA 23
29
79
PA 33
PA 24
30
80
PA 34
PA 25
31
81
PA 35
PA 26
32
82
PA 36
PA 27
33
83
PA 37
PB 20
34
84
PB 30
PB 21
35
85
PB 31
PB 22
36
86
PB 32
PB 23 PB 24
37 38
87
PB 33
88
PB 34
PB 25
39
89
PB 35
PB 26
40
90
PB 36
PB 27
41
91
PB 37
PC 20
42
92
PC 30
PC 21
43
93
PC 31
PC 22
44
94
PC 32
PC 23
45
95
PC 33
PC 24
46
96
PC 34
PC 25
47
97
PC 35
PC 26
48
PC 27
49
98 99
PC 36 PC 37
+5 V
50
100
+5 V
Compatibility
5 V/CMOS
Output Voltage
Logic 0: 0.1 V Max. Logic 1: 4.4 V Min.
Output Capability
Sample Programs
Response Speed
Sink: 6 mA @ 0.33 V Source: 6 mA @ 4.77 V 500 kHz
General
LabVIEW Toolkit
Bus Type
DOS Lib and TC/BC/MSC Demo VB/VC/Delphi/BCB Demo VB.NET/C#.NET/VC.NET/MATLAB Demo
PCI Express x1
Card ID
Yes (4-bit)
Connectors
100-pin Female SCSI II x 1
Power Consumption
600 mA @ +5 V
Operating Temperature
0°C to +60°C
Humidity
5 to 85% RH, Non-condensing
Ordering Information PCI Express, 96-ch Digital I/O Board with SCSI-II Connector. (RoHS)
Accessories DN-100 CR
Pin Assignment
PA 0
Digital Output
32-bit Windows XP/2003/2008/7/8/10
Terminal No.
Digital Input
Response Speed
Drivers
PEX-D96S CR
Pin Assignments
Hardware Specifications
DIN-Rail Mountable I/O Connector Block with 100-pin Female SCSI II Connector (RoHS)
CA-SCSI100-15
100-pin SCSI II and 100-pin Male Connector Cable, 1.5 m
DN-100-CA CR
DN-100 CR Daughterboard. Include one CA-SCSI100-15 Cable
[email protected]
Vol. IOC 2.06.06
Non-isolated Digital I/O Boards > PEX-D96S
The PEX-D96S also includes an onboard Card ID that enables the board to be easily recognized via software if two or more cards are installed in the same computer.
PCI Express
The PEX-D96S board utilizes the PCI Express bus and is designed as an easy replacement for the PIO-D96U/D96SU series without requiring any modification to either the software or the driver.
CON1
14
PAC Products
PEX-D48 PCI Express, 48-channel Digital I/O Board
Features
►►►
PCI Express x1 Interface
48 Buffered TTL Digital Input/Output Lines
Supports Card ID (SMD Switch)
Six 8-bit Bi-directional Input/Output Ports
Four Interrupt Sources
One 32-bit Programmable Internal Timer
Emulates two Industrial-standard 8255 PPI Ports (Mode 0)
Pull-high/Pull-low Jumpers for DI Channels
DO Provides Higher Driving Capability
DI/O Response Time approximately 2 μs (500 kHz Max.)
One 16-bit Event Counter
PCI Express
Software
Introduction The PEX-D48 board utilizes the PCI Express bus and is designed as an easy replacement for the PIO-D48/PIO-D48U/PIO-D48SU series without requiring any modification to either the software or the driver.
Non-isolated Digital I/O Boards > PEX-D48
The PEX-D48 provides 48 buffered TTL Digital Input/Output lines, which are grouped into six 8-bit bi-directional ports: Port A (PA), Port B (PB) and Port C (PC). Port C can also be split into two nibble-wide (4-bit) segments. All ports are configured as input mode during power-on or after a reset. The PEX-D48 also includes an onboard Card ID that enables the board to be easily recognized via software if two or more cards are installed in the same computer. The pull-high/low jumpers allow the DI status to be predefined instead of remaining floating if the DI channels are disconnected or line broken.
32/64-bit Windows XP/2003/2008/7/8/10
Linux
Sample Programs DOS Lib and TC/BC/MSC Demo
LabVIEW Toolkit
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo
Hardware Specifications Programmable DIO Channels
48
Compatibility
5 V/TTL
Digital Input
Pin Assignments Pin Assignment
Terminal No.
N.C.
01
N.C.
02
PB 7
03
PB 6
04
PB 5
05
PB 4
06
PB 3
07
PB 2
08
PB 1
09
PB 0
10
GND
11
N.C.
12
GND
13
N.C.
14
GND
15
N.C.
16
GND
17
+5 V
18
GND
19
Pin Assignment
20
+5 V
21
GND
22
PC 7
23
PC 6
24
PC 5
25
PC 4
26
PC 3
27
PC 2
28
PC 1
29
PC 0
30
PA 7
31
PA 6
32
PA 5
33
PA 4
34
PA 3
35
PA 2
36
PA 1
37
PA 0
Pin Assignment PC 7 PC 6 PC 5 PC 4 PC 3 PC 2 PC 1 PC 0 PB 7 PB 6 PB 5 PB 4 PB 3 PB 2 PB 1 PB 0 PA 7 PA 6 PA 5 PA 4 PA 3 PA 2 PA 1 PA 0 +5 V
Terminal No. 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49
02 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 CN2
CN1
Ordering Information PEX-D48 CR
15
Drivers
ICP DAS CO., LTD.
PCI Express, 48-ch Digital I/O Board (RoHS).
Pin Assignment GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND
Input Voltage
Logic 0: 0.8 V Max., Logic 1: 2.0 V Min.
Response Speed
500 kHz
Digital Output Output Voltage
Logic 0: 0.4 V Max., Logic 1: 2.4 V Min.
Output Capability
Sink: 64 mA @ 0.8 V, Source: 32 mA @ 2.0 V
Response Speed
500 kHz
Timer/Counter Channels
2 (Event Timer x 1/32-bit Timer x 1)
Resolution
16-bit
Reference Clock
Internal: 4 MHz
General Bus Type
PCI Express x1
Card ID
Yes (4-bit)
Connectors
Female DB37 x 1, 50-pin Box Header x 1
Power Consumption
900 mA @ +5 V
Operating Temperature
0°C to +60°C
Humidity
5 to 85% RH, Non-condensing
Accessories CA-3710DM
DB-37 Male-Male Cable, 1 m, 180° (RoHS)
CA-3730DM
DB-37 Male-Male Cable, 3 m, 180° (RoHS)
CA-4002
37-pin Male D-sub Connector with Plastic Cover
CA-5002
50-pin Flat Cable, 20 cm
ADP-37/PCI
50-pin Connector Extender to 37-pin Connector
DB-24P
24-channel Isolated DI Board
DB-24R
24-channel Relay Output Board
DN-37
DIN-Rail Mountable 37-pin D-sub Connector Board
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
PEX-D24/PEX-D56 PCI Express, 24/56-channel Digital I/O Board
Features
►►►
PEX-D56
PEX-D24
PCI Express x1 Interface
24/56 Buffered TTL Digital Input/Output Lines
Supports Card ID (SMD Switch)
Three 8-bit Bi-directional I/O Ports
Four Interrupt Sources
DO Provides Higher Driving Capability
Emulates two Industrial-standard 8255 PPI Ports (Mode 0)
DI/O Response Time approximately 2 μs (500 kHz Max.)
Introduction
Software Drivers
The PEX-D24/D56 provides 24/56 buffered TTL Digital Input/Output lines, which are grouped into three 8-bit bi-directional ports: Port A (PA), Port B (PB) and Port C (PC), and are configured as input mode during power-on or after a reset.
Sample Programs
32/64-bit Windows XP/2003/2008/7/8/10
DOS Lib and TC/BC/MSC Demo
PEX-D24
Pin Assignment
PEX-D56
Programmable DIO Channels
Pin Assignments
24
Digital Input 16
Terminal No.
N.C.
01
N.C.
02
PB 7
03
PB 6
04
PB 5
05
PB 4
06
Channels
-
Compatibility
5 V/TTL
PB 3
07
Input Voltage
Logic 0: 0.8 V Max., Logic 1: 2.0 V Min.
PB 2
08
Response Speed
500 kHz
PB 1
09
PB 0
10
GND
11
N.C.
12
Digital Output Channels
-
16
Compatibility
5 V/TTL
GND
13
Output Voltage
Logic 0: 0.4 V Max., Logic 1: 2.4 V Min.
N.C.
14
GND
15
N.C.
16
GND
17
+5 V
18
GND
19
Output Capability
Response Speed
Sink: 64 mA @ 0.8 V Source: 32 mA @ 2.0 V
CN1
CN3
Sink: 2.4 mA @ 0.8 V Source: 0.8 mA @ 2.0 V Sink: 64 mA @ 0.8 V Source: 32 mA @ 2.0 V
500 kHz
Pin Assignment
20
+5 V
21
GND
22
PC 7
23
PC 6
24
PC 5
25
PC 4
26
PC 3
27
PC 2
28
PC 1
29
PC 0
30
PA 7
31
PA 6
32
PA 5
33
PA 4
34
PA 3
35
PA 2
36
PA 1
37
PA 0
Pin Assignment DI 0 DI 2 DI 4 DI 6 DI 8 DI 10 DI 12 DI 14 GND +5 V
Terminal No. 01 03 05 07 09 11 13 15 17 19
02 04 06 08 10 12 14 16 18 20
Pin Assignment DI 1 DI 3 DI 5 DI 7 DI 9 DI 11 DI 13 DI 15 GND +12 V
CON2 (PEX-D56 only) Pin Assignment DO 0 DO 2 DO 4 DO 6 DO 8 DO 10 DO 12 DO 14 GND +5 V
CON3
Terminal No. 01 03 05 07 09 10 12 14 16 18
02 04 06 08 10 12 14 16 18 20
Pin Assignment DO 1 DO 3 DO 5 DO 7 DO 9 DO 11 DO 13 DO 15 GND +12 V
Non-isolated Digital I/O Boards > PEX-D24/PEX-D56
Model
LabVIEW Toolkit
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo
The PEX-D24/D56 also includes an onboard Card ID that enables the board to be easily recognized via software if two or more cards are installed in the same computer.
Hardware Specifications
Linux
PCI Express
The PEX-D24/D56 series utilizes the PCI Express bus and is designed as an easy replacement for the PIO-D24/PIO-D24U/PIO-D56/PIO-D56U series without requiring any modification to either the software or the driver.
CON1 (PEX-D56 only)
General Bus Type
PCI Express x1
Card ID
Yes (4-bit)
Connectors
Female DB37 x 1
Female DB37 x 1, 20-pin Male Box Header x 2
CA-2010
20-pin Flat Cable, 1 m
Power Consumption
420 mA @ +5 V
580 mA @ +5 V
CA-4002
37-pin Male D-sub Connector with Plastic Cover
Operating Temperature
0°C to +60°C
Humidity
5 to 85% RH, Non-condensing
CA-3710DM
DB-37 Male-Male Cable, 1 m, 180° (RoHS)
CA-3730DM
DB-37 Male-Male Cable, 3 m, 180° (RoHS)
DB-24PD
24-channel of Isolated DI Board
DB-24RD
24-channel of Relay Output Board
DB-24C
24-channel of Open-collector Output Board
DN-37
DIN-Rail Mountable 37-pin D-sub Connector Board
Accessories
Ordering Information PEX-D24 CR
PCI Express, 24-ch Digital I/O Board (RoHS).
PEX-D56 CR
PCI Express, 56-ch Digital I/O Board (RoHS).
[email protected]
Vol. IOC 2.06.06
16
PAC Products
PEX-P8R8i/PEX-P16R16i PCI Express, 8/16-channel Isolated Digital Input and 8/16-channel Relay Output Board
Features
PEX-P8R8i
PCI Express x1 Interface
Supports Card ID (SMD Switch)
Selectable DC Signal Input Filter
8/16-channel Relay Output
AC Signal Input with Filter
7 ms Relay Release Time
3750 Vrms Photo-isolation Protection
8/16-channel Isolated Digital Input
Software
Introduction PCI Express
The PEX-P8R8i/PEX-P16R16i series utilizes the PCI Express bus and is designed as an easy replacement for the PISO-P16R16U board without requiring any modification to either the software or the driver.
Isolated Digital I/O Boards > PEX-P8R8i/PEX-P16R16i
The PEX-P8R8i/PEX-P16R16i provides 8/16 photocoupler Digital Input channels with 3750 Vrms isolation protection, and allows the input signals to be completely floated to prevent ground loops. The boards are also equipped with 8/16 Relay Output channels that can be used for controlling the ON/OFF state of external devices, for driving external relays or small power switches, or for activating alarms, etc.
Drivers 32/64-bit Windows XP/2003/2008/7/8/10
Model
PEX-P8R8i
DOS Lib and TC/BC/MSC Demo
PEX-P16R16i
3750 Vrms (Photocoupler)
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo
16
Pin Assignment
Terminal No.
NO 0
01
Channels
8
COM 0
02
Input Voltage
Logic 1: AC/DC +5 ~ +24 V (AC 50 ~ 1 kHz) Logic 0: AC/DC 0 ~ +1 V
NC 0
03
NO 1
04
Without Filter: 50 kHz (Typical) With Filter: 0.455 kHz (Typical)
COM 1
05
NC 1
06
NO 2
07
COM 2
08
NC 2
09
Response Speed Relay Output Channels
8
16
Relay Type
4 SPDT, 4 SPST
8 SPDT, 8 SPST
NO 7
10
Voltage
120 VAC/24 VDC
COM 7
11
Current
1A
DIA 0
12
Operate Time
1 ms (Typical)
DIA 1
13
Release Time
7 ms (Typical)
DIA 2
14
DIA 3
15
Lifetime
Mechanical: 5,000,000 ops. Electrical: 100,000 ops.
DIA 4
16
DIA 5
17
DIA 6
18
DIA 7
19
Contact Rating
Insulation Resistance
1000 MΩ @ 500 VDC
Bus Type
PCI Express x1
Card ID
Yes (4-bit)
Connectors
Female DB37 x 1
Power Consumption
800 mA @ +5 V
Female DB37 x 1, 40-pin Box Header x 1
Operating Temperature
0°C to +60°C
Humidity
5 to 85% RH, Non-condensing
Ordering Information PEX-P8R8i CR
PCI Express, 8-ch Isolated Digital Input and 8-ch Relay Output Board (RoHS). Includes one CA-4002 D-sub Connector.
PEX-P16R16i CR
PCI Express, 16-ch Isolated Digital Input and 16-ch Relay Output Board (RoHS). Includes one CA-4037W Cable and two CA-4002 D-sub Connectors.
ICP DAS CO., LTD.
LabVIEW Toolkit
Pin Assignments
Digital Input Isolation Voltage
Linux
Sample Programs
Hardware Specifications
General
17
PEX-P16R16i
►►►
Pin Assignment
20
NO 3
21
COM 3
22
NC 3
23
NO 4
24
COM 4
25
NO 5
26
COM 5
27
NO 6
28
COM 6
29
GND
30
DIB 0
31
DIB 1
32
DIB 2
33
DIB 3
34
DIB 4
35
DIB 5
36
DIB 6
37
DIB 7
Pin Assignment NO 8 COM 8 NC 8 NO 9 COM 9 NC 9 NO 10 COM 10 NC 10 NO 15 COM 15 DIA 8 DIA 9 DIA 10 DIA 11 DIA 12 DIA 13 DIA 14 DIA 15 N.C.
Pin Assignment
Terminal No. 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39
02 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
NO 11 COM 11 NC 11 NO 12 COM 12 NO 13 COM 13 NO 14 COM 14 GND DIB 8 DIB 9 DIB 10 DIB 11 DIB 12 DIB 13 DIB 14 DIB 15 N.C. N.C.
CON2 (PEX-P16R16i only)
CON1
Accessories CA-4037W
40-pin Flat and 37-pin Female D-sub Cable, 24 cm
CA-4002
37-pin Male D-sub Connector with Plastic Cover
CA-3710DM
DB-37 Male-Male Cable, 1 m, 180° (RoHS)
CA-3730DM
DB-37 Male-Male Cable, 3 m, 180° (RoHS)
DB-37
Screw Terminal for I/O Boards that use a 37-pin D-sub Connector
DN-37
DIN-Rail Mountable 37-pin D-sub Connector Board
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
PEX-P8POR8i/PEX-P16POR16i PCI Express, 8/16-channel Isolated Digital Input and 8/16-channel PhotoMOS Relay Output Board
PEX-P8POR8i
Features
PCI Express x1 Interface
Supports Card ID (SMD Switch)
LED Power Indicator
8/16-channel Isolated Digital Input
The PEX-P8POR8i/PEX-P16POR16i series utilizes the PCI Express bus and designed as an easy replacement for the PCI-P8POR8/P16POR16 series without requiring any modification to either the software or the driver.
Selectable DC Signal Input Filter
AC Signal Input with Filter
2000 VDC Photo-isolation Protection
The PEX-P8POR8i/PEX-P16POR16i provides 8/16 photocoupler Digital Input channels with 2000 VDC isolation protection, and allows the input signals to be completely floated to prevent ground loops. It is also equipped with 8/16 PhotoMOS Relay Outputs channels that can be used for controlling the ON/OFF state of external devices, for driving external relays or small power switches, or for activating alarms, etc.
8/16-channel PhotoMOS Relay Output Supports DO Status Readback (Register Level)
0.05 ms Release Time
Durable and highly reliable PhotoMOS Relay
Low Leakage Current when PhotoMos Relay is OFF
No Contact Bounce, No Sparking, No Acoustical Noise
Software Drivers 32/64-bit Windows XP/2003/2008/7/8/10
Pin Assignments
Linux
Sample Programs DOS Lib and TC/BC/MSC Demo
Pin Assignment
Terminal No.
NO 0
01
NO 1
02
NO 2
03
NO 3
04
NO 4
05
NO 5
06
NO 6
07
NO 7
08
N.C.
09
N.C.
10
N.C.
11
DIA 0
12
DIA 1
13
DIA 2
14
DIA 3
15
DIA 4
16
DIA 5
17
DIA 6
18
DIA 7
19
Pin Assignment
20
CM 0
21
CM 1
22
CM 2
23
CM 3
24
CM 4
25
CM 5
26
CM 6
27
CM 7
28
N.C.
29
N.C./ GND
30
DIB 0
31
DIB 1
32
DIB 2
33
DIB 3
34
DIB 4
35
DIB 5
36
DIB 6
37
DIB 7
Pin Assignment NO 8 NO 9 NO 10 NO 11 NO 12 NO 13 NO 14 NO 15 N.C. N.C. N.C. DIA 8 DIA 9 DIA 10 DIA 11 DIA 12 DIA 13 DIA 14 DIA 15 N.C.
Terminal No. 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39
02 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Pin Assignment CM 8 CM 9 CM 10 CM 11 CM 12 CM 13 CM 14 CM 15 N.C. N.C. / GND DIB 8 DIB 9 DIB 10 DIB 11 DIB 12 DIB 13 DIB 14 DIB 15 N.C. N.C.
CON2 (PEX-P16POR16i only)
LabVIEW Toolkit
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo
Hardware Specifications Model
PEX-P8POR8i
PEX-P16POR16i
Digital Input Isolation Voltage
2000 VDC (Photocoupler)
Channels
8 16 Logic 1: AC/DC +5 ~ +24 V (AC 50 ~ 1 kHz) Logic 0: AC/DC 0 ~ +1 V Without Filter: 50 kHz (Typical) With Filter: 0.455 kHz (Typical)
Input Voltage Response Speed Relay Output Channels
8
Relay Type
PhotoMOS, Form A
Contact Rating
Voltage
16
300 V (AC peak or DC)
Current
130 mA
Operate Time
0.7 ms (Typical)
Release Time
0.05 ms (Typical)
Insulation Resistance
1000 MΩ @ 500 VDC
Electrical Endurance
Long Life and No Spike
General CON1
Accessories CA-4037W
40-pin Flat and 37-pin Female D-sub Cable, 24 cm
CA-4002
37-pin Male D-sub Connector with Plastic Cover
CA-3710DM
DB-37 Male-Male Cable, 1 m, 180° (RoHS)
CA-3730DM
DB-37 Male-Male Cable, 3 m, 180° (RoHS)
DB-37
Screw Terminal for I/O Boards that use a 37-pin D-sub Connector
DN-37
DIN-Rail Mountable 37-pin D-sub Connector Board
[email protected]
Bus Type
PCI Express x1
Card ID
Yes (4-bit)
Connectors
Female DB37 x 1
Power Consumption
800 mA @ +5 V
Isolated Digital I/O Boards > PEX-P8POR8i/PEX-P16POR16i
PCI Express
Introduction
►►►
PEX-P16POR16i
Female DB37 x 1, 40-pin Box Header x 1
Operating Temperature
0°C to +60°C
Humidity
5 to 85% RH, Non-condensing
Ordering Information PEX-P8POR8i CR
PCI Express, 8-ch Isolated Digital Input and 8-ch PhotoMOS Relay Output Board (RoHS). Includes one CA4002 D-sub Connector.
PEX-P16POR16i CR
PCI Express, 16-ch Isolated Digital Input and 16-ch PhotoMOS Relay Output Board (RoHS). Includes one CA4037W Cable and two CA-4002 D-sub Connectors.
Vol. IOC 2.06.06
18
PAC Products
PEX-P32C32/PEX-P32A32
Availab ble sso bl soo oo on n
PCI Express, 32-channel Optically-isolated Digital Input and 32-channel Optically-isolated Open-collector Digital Output (Sink/Source) Board PEX-P32C32
Features
Introduction
►►►
PCI Express x1 Interface
32-channel Optically-isolated Digital Input
3750 Vrms Photo-isolation Protection
Supports Card ID (SMD Switch)
32-channel Optically-isolated Digital Output
PEX-P32A32
The PEX-P32C32/P32A32 series provides 32 optically-isolated Digital Input channels and 32 optically-isolated Digital Output channels, arranged into four isolated banks. Each input channel uses a photocoupler input that allows either an internal isolated power supply or an external power supply to be connected, and can be selected via a jumper.
Internal Power (3000 VDC Isolation) for Dry-contact Input
PCI Express
PEX-P32C32: Current Sinking (NPN)
PEX-P32A32: Current Sourcing (PNP)
Supports Output Status Readback (Register Level)
Each Digital Output channel includes either a Darlington (PEX-P32C32) or a PNP (PEX-P32A32) transistor and an integrated suppression diode for the inductive load. The input port may use either an external power source or can be powered from the Host PC via a DC/DC converter. The output port should use an external power source. The board helps eliminate ground loop problems and isolates the host computer from potentially damaging voltage spikes.
Software Isolated Digital I/O Boards > PEX-P32C32/PEX-P32A32
The PEX-P32C32/P32A32 series also includes an onboard Card ID switch that enables the board to be easily recognized via software if two or more cards are installed in the same computer. The PEX-P32C32/P32A32 series is designed as an easy replacement for the PISO-P32C32U/P32A32U series without requiring any modification to either the software or the driver.
Drivers 32/64-bit Windows XP/2003/2008/7/8/10
Linux
Sample Programs DOS Lib and TC/BC/MSC Demo
LabVIEW Toolkit
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo
Hardware Specifications Model
PEX-P32C32
PEX-P32A32
Digital Input
Pin Assignments Pin Assignment
Terminal No.
Ext. GND0
01
DI 0
02
DI 1
03
DI 2
04
DI 3
05
DI 4
06
DI 5
07
DI 6
08
DI 7
09
DI 8
10
DI 9
11
DI 10
12
DI 11
13
DI 12
14
DI 13
15
DI 14
16
DI 15
17
ECOM0
18
IGND0
19
20
Pin Assignment
21
Ext. GND0 DO 0
22
DO 1
23
DO 2
24
DO 3
25
DO 4
26
DO 5
27
DO 6
28
DO 7
29
DO 8
30
DO 9
31
DO 10
32
DO 11
33
DO 12
34
DO 13
35
DO 14
36
DO 15
37
Ext. PWR0
Isolation Voltage Pin Assignment Ext. GND1 DI 16 DI 17 DI 18 DI 19 DI 20 DI 21 DI 22 DI 23 DI 24 DI 25 DI 26 DI 27 DI 28 DI 29 DI 30 DI 31 ECOM1 IGND1 N.C.
Terminal No. 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39
02 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Pin Assignment Ext. GND1 DO 16 DO 17 DO 18 DO 19 DO 20 DO 21 DO 22 DO 23 DO 24 DO 25 DO 26 DO 27 DO 28 DO 29 DO 30 DO 31 Ext. PWR1 N.C. N.C.
3750 Vrms
Channels
32
Compatibility
Sink or Source, Photocoupler isolated channel with common power or ground
Input Voltage
Logic 0: 0 ~ +1 V, Logic 1: +9 ~ +24 V
Impedance
3 KΩ, 0.25 W
Digital Output Isolation Voltage
3750 Vrms
Channels
32
Compatibility
Sink, Open-collector
Output Capability
100 mA/+30 V for each channel @ 100% duty
Source, Open-collector
General Bus Type
PCI Express x1
Card ID
Yes (4-bit)
Connectors
Female DB37 x 1, 40-pin Box Header x 1
Power Consumption
600 mA @ +5 V
Operating Temperature
0°C to +60°C
Humidity
5 to 85% RH, Non-condensing
CON2
Accessories CON1
Ordering Information
19
PEX-P32C32 CR
PCI Express, 32-ch Optically-isolated Digital Input and 32ch Optically-isolated Open-collector Digital Output Board (Sink, RoHS). Includes one CA-4037B Cable and two CA4002 D-sub Connectors.
PEX-P32A32 CR
PCI Express, 32-ch Optically-isolated Digital Input and 32ch Optically-isolated Open-collector Digital Output Board. (Source, RoHS). Includes one CA-4037B Cable and two CA4002 D-sub Connectors.
ICP DAS CO., LTD.
CA-4037W
40-pin Flat and 37-pin Female D-sub Cable, 24 cm
CA-4002
37-pin Male D-sub Connector with Plastic Cover
CA-3710DM
DB-37 Male-Male Cable, 1 m, 180° (RoHS)
CA-3730DM
DB-37 Male-Male Cable, 3 m, 180° (RoHS)
DB-37
Screw Terminal for I/O Boards that use a 37-pin D-sub Connector
DN-37
DIN-Rail Mountable 37-pin D-sub Connector Board
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
PEX-730/PEX-730A
NEW
PCI Express, 32-channel TTL Digital Input/Output and d 32-channel Isolated Digital Input/Output (Sink/Source) Board
The PEX-730/730A also adds a Card ID switch. Users can set Card ID on a board and recognize the board by the ID via software when using two or more cards in one computer. The PEX-730/730A is designed as easy replacement for the PISO-730U/730A without any software/driver modification.
Linux
Sample Programs DOS Lib and TC/BC/MSC Demo
LabVIEW Toolkit
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo
Pin Assignments Terminal No.
02
IDI 4
03
IDI 6
04
IDI 8
05
IDI 10
06
IDI 12
07
IDI 14
08
EI_COM1 09 EO_COM1 10 IDO 0
11
IDO 2
12
IDO 4
13
IDO 6
14
IDO 8
15
IDO 10
16
IDO 12
17
IDO 14
18
EO_COM2 19
PCI Express x1 Interface
16-channel Optically-isolated Digital Input
16-channel Optically-isolated Digital Output (Sink, NPN)
16-channel 5 V/TTL Digital Output
16-channel 5 V/TTL Digital Input
3750 Vrms Photo-isolation Protection
Internal Power (3000 VDC isolation) for Dry-contact Input
Supports Output Status Readback
Supports Card ID (SMD Switch)
Two Interrupt Sources
Hardware Specifications PEX-730
PEX-730A
Pin Assignment
20
IDI 1
21
IDI 3
22
IDI 5
23
IDI 7
24
IDI 9
25
IDI 11
26
IDI 13
27
IDI 15
28
EI.COM2
29
I_GND
30
IDO 1
31
IDO 3
32
IDO 5
33
IDO 7
34
IDO 9
35
IDO 11
36
IDO 13
37
IDO 15
CON1
Pin Assignment DI 0 DI 2 DI 4 DI 6 DI 8 DI 10 DI 12 DI 14 GND +5 V
Terminal No. 01 03 05 07 09 11 13 15 17 19
02 04 06 08 10 12 14 16 18 20
DO 0 DO 2 DO 4 DO 6 DO 8 DO 10 DO 12 DO 14 GND +5 V
Terminal No. 01 03 05 07 09 10 12 14 16 18
02 04 06 08 10 12 14 16 18 20
Optical
Isolation Voltage
3750 Vrms
Input Voltage
Logic 0: 0 ~ +1 V, Logic 1: +9 ~ +24 V
Input Impedance
1.2 KΩ, 1 W
Response Speed
4 kHz (Typical)
Isolated Digital Output Channels
16
Compatibility
Sink (NPN)
Isolation Voltage
3750 Vrms 100 mA/+30 V for each channel @ 100% duty
Response Speed
4 kHz (Typical)
Channels
16
DI 1 DI 3 DI 5 DI 7 DI 9 DI 11 DI 13 DI 15 GND +12 V
Compatibility
5 V/TTL
Pin Assignment DO 1 DO 3 DO 5 DO 7 DO 9 DO 11 DO 13 DO 15 GND +12 V
Ordering Information PEX-730 CR
PCI Express, 32-ch TTL Digital Input/Output and 32-ch Isolated Digital Input/Output (Sink) Board (RoHS). Includes one CA-4002 D-sub Connector.
PEX-730A CR
PCI Express, 32-ch TTL Digital Input/Output and 32ch Isolated Digital Input/Output (Source) Board (RoHS). Includes one CA-4002 D-sub Connector.
Source (PNP)
Output Capability
Non-isolated Digital Input
CON3
[email protected]
16
Compatibility
Pin Assignment
CON2
Pin Assignment
Channels
Input Voltage
Logic 0: 0.8 V Max., Logic 1: 2.0 V Min.
Response Speed
500 kHz
Non-isolated Digital Output Channels
16
Compatibility
5 V/TTL
Output Voltage
Logic 0: 0.4 V Max., Logic 1: 2.4 V Min.
Output Capability
Sink: 2.4 mA @ 0.8 V, Source: 0.8 mA @ 2.0 V
Response Speed
500 kHz
Isolated Digital I/O Boards > PEX-730/PEX-730A
32/64-bit Windows XP/2003/2008/7/8/10
01
Isolated Digital Input
Drivers
IDI 2
►►►
Model
Software
IDI 0
Features
PCI Express
PEX-730/730A cards provide 32 isolated digital I/O channels (16 x DI and 16 x DO) and 32 TTL-level digital I/O channels (16 x DI and 16 x DO). Both the isolated DI and DO channels use a short optical transmission path to transfer an electronic signal between the elements of a circuit and keep them electrically isolated. With 3750 Vrms isolation protection, these DI/O channels allow the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. Each digital output offers a Darlington (PEX-730) or a PNP (PEX-730A) transistor and integrated suppression diode for the inductive load. The open collector outputs (DO channels) are typically used for alarm and warning notification, signal output control, control for external circuits that require a higher voltage level, and signal transmission applications, etc.
Pin Assignment
PEX-730A
PEX-730
Introduction
General Bus Type
PCI Express x1
Card ID
Yes (4-bit)
Connectors
Female DB37 x 1, 20-pin Box Header x 2
Power Consumption
600 mA @ +5 V
Operating Temperature
0°C to +60°C
Humidity
5 to 85% RH, Non-condensing
Accessories CA-2010
20-pin Flat Cable, 1 m
CA-4002
37-pin Male D-sub Connector with Plastic Cover
CA-3710DM
DB-37 Male-Male Cable, 1 m, 180° (RoHS)
CA-3730DM
DB-37 Male-Male Cable, 3 m, 180° (RoHS)
DN-20
DIN-Rail Mountable 20-pin D-sub Connector Board
DN-37
DIN-Rail Mountable 37-pin D-sub Connector Board
ADP-20/PCI
20-pin Extender Board
Vol. IOC 2.06.06
20
PAC Products
PEX-P64/PEX-P64-24V
NEW
PCI Express, 64-channel Optically-isolated Digital Input Board
Features
►►►
PCI Express x1 Interface
3750 Vrms Photo-isolation Protection
64-channel Optically-isolated Digital Input
Digital InputChannels arranged into Four Isolated Banks when using
Selectable Internal or External Power for Digital Input
Internal Power (3000 VDC Isolation) for Dry-Contact Input
Supports Card ID (SMD Switch)
Four Isolated External Power Supplies
Introduction
Software
PCI Express Isolated Digital I/O Boards > PEX-P64/PEX-P64-24V
The PEX-P64/P64-24V series utilizes the PCI Express bus and provides 64 optically-isolated Digital Input channels that use either an internal or external power supply that can be selected via a jumper. The internal power is provided by an onboard isolated DC/DC converter that provides 3000 VDC isolation and is used for connecting dry-contact input devices. The DI channels are arranged into four isolated banks when using four isolated external power supplies, where DI channels 0 to 15 are allocated to bank A, DI channels 16 to 31 are allocated to bank B, DI channels 32 to 47 are allocated to bank C, and DI channels 48 to 63 are allocated to bank D. The onboard photocouplers provide 3750 Vrms isolation, and act as an interface between field logic signals, eliminating ground loop problems and isolating the host computer from potentially damaging voltage spikes. The PEX-P64/P64-24V series also include an onboard Card ID switch that enables the board to be easily recognized via software if two or more cards are installed in the same computer. The PEX-P64/P64-24V series is designed as an easy replacement for the PISO-P64U board without requiring any modification to either the software or the driver.
Hardware Specifications Model
PEX-P64
PEX-P64-24V
Digital Input
32/64-bit Windows XP/2003/2008/7/8/10
DOS Lib and TC/BC/MSC Demo
LabVIEW Toolkit
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo
Pin Assignments Pin Assignment
Terminal No.
IGND0
01
DI 0
02
DI 1
03
DI 2
04
DI 3
05
DI 4
06
DI 5
07
DI 6
08
DI 7
09
DI 8
10
Channels
64
DI 9
11
Compatibility
Photocoupler Isolated
DI 10
12
Input Logic Low
0 ~ +1 V
0 ~ +1 V
DI 11
13
+20 ~ +28 V (+30 V Max.)
DI 12
14
Input Logic High
+5 ~ +15 V (+24 V Max.)
DI 13
15
DI 14
16
Impedance
1.2 KΩ, 1 W
3 KΩ, 1 W
DI 15
17
Response Speed
4 kHz (Typical)
ECOM0
18
N.C.
19
Bus Type
Linux
Sample Programs
3750 Vrms
Isolation Voltage
General
Pin Assignment
20
IGND1
21
DI 16
22
DI 17
23
DI 18
24
DI 19
25
DI 20
26
DI 21
27
DI 22
28
DI 23
29
DI 24
30
DI 25
31
DI 26
32
DI 27
33
DI 28
34
DI 29
35
DI 30
36
DI 31
37
ECOM1
Pin Assignment IGND2 DI 32 DI 33 DI 34 DI 35 DI 36 DI 37 DI 38 DI 39 DI 40 DI 41 DI 42 DI 43 DI 44 DI 45 DI 46 DI 47 ECOM2(+) ECOM2(-) N.C.
Pin Assignment
Terminal No. 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39
02 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
IGND3 DI 48 DI 49 DI 50 DI 51 DI 52 DI 53 DI 54 DI 55 DI 56 DI 57 DI 58 DI 59 DI 60 DI 61 DI 62 DI 63 ECOM3 N.C. N.C.
CON2
PCI Express x1
Card ID
Yes (4-bit)
Connectors
Female DB37 x 1 40-pin Box Header x 1
Power Consumption
400 mA @ +5 V
Operating Temperature
0°C to +60°C
Humidity
5 to 85% RH, Non-condensing
Ordering Information
21
Drivers
PEX-P64 CR
PCI Express, 64-ch Optically-isolated Digital Input Board (High: +5 ~ +15 V, RoHS). Includes one CA-4037B Cable and two CA-4002 D-sub Connectors.
PEX-P64-24V CR
PCI Express, 64-ch Optically-isolated Digital Input Board (High: +20 ~ +28 V, RoHS). Includes one CA-4037B Cable and two CA-4002 D-sub Connectors.
ICP DAS CO., LTD.
CON1
Accessories CA-4037B
40-pin Flat and 37-pin Female D-sub Cable, 24 cm
CA-4002
37-pin Male D-sub Connector with Plastic Cover
CA-3710DM
DB-37 Male-Male Cable, 1 m, 180° (RoHS)
CA-3730DM
DB-37 Male-Male Cable, 3 m, 180° (RoHS)
CA-3750DM
DB-37 Male-Male Cable, 5 m, 180° (RoHS)
DB-37
Screw Terminal for I/O Boards that use a 37-pin D-sub Connector
DN-37
DIN-Rail Mountable 37-pin D-sub Connector Board
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
PEX-C64 PCI Express, 64-channel Open-collector Digital Output (Sink) Board
Features
►►►
PCI Express x1 Interface
3750 Vrms Photo-isolation Protection
64-channel Optically-isolated Digital Output (Sink, NPN)
Digital Output Channels arranged into Four Isolated Banks when using
Supports Output Status Readback
Four Isolated External Power Supplies
Supports Card ID (SMD Switch)
Introduction
The PEX-C64 board also includes an onboard Card ID switch that enables the board to be easily recognized via software if two or more cards are installed in the same computer. The PEX-C64 board is designed as an easy replacement for the PISO-C64U board without requiring any modification to either the software or the driver.
Pin Assignments
Drivers 32/64-bit Windows XP/2003/2008/7/8/10
Linux
Sample Programs DOS Lib and TC/BC/MSC Demo
LabVIEW Toolkit
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo
Hardware Specifications Digital Output
Pin Assignment
Terminal No.
Ext. GND0 DO 0 DO 1 DO 2 DO 3 DO 4 DO 5 DO 6 DO 7 DO 8 DO 9 DO 10 DO 11
01
14
13
Ext. PWR0 N.C.
18
Output Capability
100 mA/+30 V for each channel @ 100% duty
Response Speed
4 kHz (Typical)
General Bus Type
19
36
DO 31
37
Ext. PWR1
Pin Assignment
Ext. GND2 DO 32 DO 33 DO 34 DO 35 DO 36 DO 37 DO 38 DO 39 DO 40 DO 41 DO 42 DO 43 DO 44 DO 45 DO 46 DO 47 Ext. PWR2 N.C. N.C.
Terminal No. 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39
02 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Pin Assignment
Ext. GND3 DO 48 DO 49 DO 50 DO 51 DO 52 DO 53 DO 54 DO 55 DO 56 DO 57 DO 58 DO 59 DO 60 DO 61 DO 62 DO 63 Ext. PWR3 N.C. N.C.
CON2
CON1
PCI Express x1
Card ID
Yes (4-bit)
Connectors
Female DB37 x 1 40-pin Box Header x 1
Power Consumption
800 mA @ +5 V
Operating Temperature
0°C to +60°C
Humidity
5 to 85% RH, Non-condensing
Ordering Information
PEX-C64 CR
DO 30
30
12
17
Sink, Open Collector
29
11
DO 15
Compatibility
28
10
16
DO 29
27
09
DO 14
35
26
08
64
DO 28
25
07
Channels
34
24
06
15
DO 27
23
05
DO 13
33
22
04
3750 Vrms
32
21
03
Isolation Voltage
31
Ext. GND1 DO 16 DO 17 DO 18 DO 19 DO 20 DO 21 DO 22 DO 23 DO 24 DO 25 DO 26
20
02
DO 12
Pin Assignment
Isolated Digital I/O Boards > PEX-C64
Software
PCI Express
The PEX-C64 board utilizes the PCI Express bus and provides 64 optically-isolated Digital Output channels, each of which includes a Darlington transistor that provides 3750 Vrms isolation, and an integrated suppression diode for the inductive load. The DO channels are allocated into four isolated banks when using four isolated external power supplies, and act as an interface between field logic signals, eliminating ground loop problems and isolating the host computer from potentially damaging voltage spikes.
PCI Express, 64-ch Optically-isolated Digital Output Board (Sink, RoHS). Includes one CA-4037B Cable and two CA-4002 D-sub Connectors.
[email protected]
Accessories CA-4037B
40-pin Flat and 37-pin Female D-sub Cable, 24 cm
CA-4002
37-pin Male D-sub Connector with Plastic Cover
CA-3710DM
DB-37 Male-Male Cable, 1 m, 180° (RoHS)
CA-3730DM
DB-37 Male-Male Cable, 3 m, 180° (RoHS)
DB-37
Screw Terminal for I/O Boards that use a 37-pin D-sub Connector
DN-37
DIN-Rail Mountable 37-pin D-sub Connector Board
DB-32R
32-ch Relay Output Board. Include one CA-3710D Male-Male D-sub Cable, 1.0 m
Vol. IOC 2.06.06
22
PCI Bus Data Acquisition Boards High Speed Multifunction & Multifunction Boards PCI-826 PCI-822
NEW PCI-2602U
Model
LU
LU
16-bit
12-bit
PCI-1802 LU
PCI-1800
HU
LU
HU
PCI-1602 U
PCI-1202
FU
LU
HU
PIO-821 LU
HU
Analog Input Resolution
16-bit
12-bit
12-bit
16-bit
12-bit
12-bit 16
SE
16
32
32
16
32
32
Diff.
8
16
16
8
16
16
1 MS/s
250 KS/s
-
Low Gain
8K
8K
8K
1K
8K
1K
-
Resolution
16-bit
16-bit
12-bit
12-bit
12-bit
12-bit
12-bit
Channels
2
2
2
2
2
2
1
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
1
1
1
1
3
Channels
Sampling Rate Gain FIFO Size
8
330 KS/s 44 KS/s 330 KS/s 44 KS/s 100 KS/s 200 KS/s 110 KS/s 44 KS/s Low Gain
High Gain
Low Gain
High Gain
Low Gain
Low Gain
High Gain
45 KS/s Low Gain
High Gain
Analog Output
Digital Input/Output DI Channels DO Channels
Programmable 32 Programmable 32 (DI: 5 V/TTL) (5 V/TTL) (DO: 5 V/CMOS)
Timer/Counter Channels Page
-
-
25
26
29
PCI Bus
Analog Input/Output Boards PCI-1002
Selection Guide
Model
LU
HU
PISO-813U PISO-DA2U PISO-DA4U PISO-DA8U PISO-DA16U PIO-DA4U
PIO-DA8U PIO-DA16U
Analog Input Resolution Channels
12-bit
12-bit
SE
32
32
-
Diff.
16
-
-
10 KS/s
-
Low Gain
-
Sampling Rate Gain
110 KS/s 44 KS/s Low Gain
High Gain
-
Analog Output Channels
-
2
4
8
16
4
8
Resolution
-
12-bit
14-bit
14-bit
Isolation Voltage
-
3750 VDC
2500 VDC
-
16
Digital Input/Output DI Channels
16 (5 V/TTL)
-
-
16 (5 V/TTL)
DO Channels
16 (5 V/TTL)
-
-
16 (5 V/TTL)
-
-
-
Timer/Counter Channels Page
3
29
30
Memory Boards Model
PCI-M512U
Digital Input/Output
Model
16 (5 V/TTL)
Channels
DO Channels
16 (5 V/TTL)
Counter/Frequency
Size Li-ion Battery Page
ICP DAS CO., LTD.
PCI-FC16U
Programmable DIO
DI Channels Memory
23
Counter/Frequency Boards
Channels 512 KB BT1 and BT2 30
Resolution Isolation Voltage Page
32 (5 V/TTL) 16-channel Up Counter/16-channel Frequency 32-bit 1000 Vrms 28
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
Non-isolated Digital Input/Output Boards PCID64HU
Model
PIOD24U
PIOD48U
PIOD48SU
PIOD56U
PIOD64U
PIOD96U
PIOD96SU
PIOD144U
PIOD144LU
PIOD168U
PCITMC12A
Programmable DIO Channels
-
24
48
24
-
96
144
168
-
32
-
-
16
32
-
-
-
16
Digital Input/Output DI Channels DO Channels
32
-
-
16
32
Compatibility
5 V/TTL
5 V/TTL
5 V/TTL
5 V/TTL
5 V/TTL
10.0 MHz
1 MHz
1 MHz
1 MHz
1 MHz
1 MHz
3
-
2
-
5
-
Response Speed
5 V/TTL
5 V/CMOS
-
16
5 V/TTL
5 V/TTL
1 MHz
1 MHz
1 MHz
-
-
12
5 V/TTL
5 V/CMOS
Timer/Counter Channels Page
27
30
Isolated Digital Input/Output Boards PISO-P32C32U PISO-P32A32U -
-5V
-
-5V
PISOP32S32WU
PISO-P64U
32
64
-
-24V
PISOC64U
PISOA64
PISO-730
16
U
PISO-730A
-5V
-
-5V
Isolated Digital Input Channels
32
32
32
Isolation Voltage
Input Voltage
Logic 0 Logic 1
+5 ~ +12 V
+9 ~ +24 V
-
-
-
3750 Vrms
Optical-isolated
-
-
Optical-isolated
0 ~ +1 V
-
-
0 ~ +1 V
-
-
+5 ~ +5 ~ +9 ~ +24 V +15 V +12 V
+9 ~ +24 V
+20 ~ +28 V
+9 ~ +24 V
16
+5 ~ +9 ~ +12 V +24 V
+5 ~ +12 V
Isolated Digital Output Channels
32
32 Sink (NPN)
Type Isolated Voltage
32
32
-
64
64
16
16
Source (PNP)
Sink (NPN)
-
Sink (NPN)
Source (PNP)
Sink (NPN)
Source (PNP)
3750 Vrms
-
Selection Guide
Type
-
3750 Vrms
PCI Bus
PISO1730U
Model
3750 Vrms
Non-isolated Digital I/O DI Channels
-
16 (5 V/TTL)
16 (5 V/TTL)
DO Channels
-
16 (5 V/TTL)
16 (5 V/TTL)
Page
Model
31
32
PISOPISOPISOPCI-P8R8U PCI-16R16U PCI-P16C16 PCI-P16POR16U PISO-P8R8U P8SSR8AC P8SSR8DC P16R16U
PISO-725
Isolated Digital Input Channels
8
16
16
16
Type
8
8
8
16
8
Optical-isolated
Isolation Voltage
5000
Vrms
3750 Vrms
Isolated Digital Output Channels
Type Isolated Voltage
4 x Form C 4 x Form A
8 x Form C 8 x Form A
16 (Sink, NPN)
16 x Form A
8 x Form A
8 x Form A
8 x Form A
8 x Form C 8 x Form A
8 x Form C
Relay
Relay
Open-collector
PhotoMOS Relay
Relay
AC Type Solid-state Relay
DC Type Solid-state Relay
Relay
Relay
-
5000 Vrms
Page
32
[email protected]
Vol. IOC 2.06.06
24
PCI Bus Data Acquisition Boards PCI-2602U
NEW
Universal PCI, 1 MS/s High-speed, 16-channel Analog Input, 2-channel Analog Output and 32-channel DI/O Multifunction Board
Features
►►►
Universal PCI (3.3 V/5 V) Interface
Supports Card ID (SMD Switch)
16-bit ADC with Max. 1 MS/s Sampling Rate
2-channel 16-bit Voltage Output
8192-sample Hardware FIFO for Analog Input
Supports Variety of Programmable AD Trigger Mode
AD R/L Filter Function
512-sample Hardware FIFO for the Analog Pattern Generator
32 Programmable DI/O Channels
16 Single-ended/8 Differential Analog Input Channels
Supports DO Status Readback (Register Level)
AD Data Transfer: Polling, Interrupt, DMA
512-sample Hardware FIFO for the Digital Pattern Generator
AD Continuous Capture
Digital Input Filter Function
AD Auto-calibration Function
Introduction
Hardware Specifications
PCI Bus High-speed Multifunction Boards > PCI-2602U
The PCI-2602U board delivers exceptional performance and value by providing 16 singleended or 8 differential 16-bit Analog Input channels with an 8 k sample hardware FIFO, two 16-bit Analog Output channels with a 512-sample hardware FIFO, and 32 Digital Input/Output lines with a 512 sample Digital Output hardware FIFO on a single board. 16-bit Analog Input sampling rates of up to 1 MS/s can be achieved, and the board also includes DMA channels that allow the streaming of Analog Input data to be performed without significantly impacting processor resources. The PCI-2602U board provides a wide range of features, including Card ID functionality, programmable Digital Input filters, MagicScan, Analog/Digital pattern generation, External AD triggers, analog triggers, and pulse width modulation (PWM). The PCI-2602U board includes a software calibration function that removes the necessity for complicated manual calibration, meaning that jumpers and trimpots are no longer required, and the calibration data can be saved in the EEPROM for long-term use.
Drivers
Analog Input Channels
16 Single-ended/8 Differential
AD Converter
16-bit, 1 μs conversion time
Sampling Rate
1 MS/s (Max.)
FIFO Size
8192 Samples
Bipolar Range
±10.24 V, ±5.12 V, ±2.56 V
PCI-2602U CR
2
Resolution
16-bit
Sample Programs
512 Samples
LabVIEW Toolkit
Output Rate
20 MS/s (Max.)
VB/VC/Delphi/BCB/MATLAB Demo
Output Range
±10 V, ±5 V, ±EXT_REF, 0 ~ +10 V, 0 ~ +5 V, 0 ~ EXT_REF
VB.NET/C#.NET/VC.NET Demo
Programmable DIO Channels
32 (4-port Programmable)
Pin Assignments
Digital Input Compatibility
5 V/TTL
FIFO Size
512 Samples
Input Voltage
Low: 0.8 V Max. High: 2.0 V Min.
Digital Output
Pin Assignment
Pin Assignment
Terminal No.
+5 V (Output)
01
35
+12 V (Output)
Ext_TRG
02
36
Cnt0_GATE
Compatibility
5 V/CMOS
Trg_GATE
03 04
37 38
Cnt0_OUT
Pacer_OUT
DO FIFO Size
512 Samples
D_GND
05
39
D_GND
Logic 0: 0.4 V Max. Logic 1: 2.4 V Min. Sink: 6 mA @ 0.33 V Source: 6 mA @ 4.77 V
PD 7
06
40
PD 6
PD 5
07
41
PD 4
PD 3
08
42
PD 2
PD 1
09
43
PD 0
PC 7
10
44
PC 6
PC 5
11
45
PC 4
PC 3
12
46
PC 2
PC 1
13
47
PC 0
D_GND
14
48
D_GND
PB 7
15
49
PB 6
PB 5
16
50
PB 4
17
51
PB 2
Output Capability General Bus Type
3.3 V/5 V Universal PCI, 32-bit, 33 MHz
Card ID
Yes (4-bit)
Cnt0_CLK
Connectors
68-pin Female SCSI II x 1
PB 3
Power Consumption
1 A @ +5 V (Max.)
PB 1
18
52
PB 0
PA 7 PA 5
19 20
53
PA 6
54
PA 4
PA 3
21
55
PA 2
PA 1
22
56
PA 0
AO_GND
23
57
AO_GND
AO1_OUT
24
58
AO0_OUT
AO1_REF
25
59
AO0_REF
AI_GND
26
60
AI_GND
AI 15
27
61
AI 14
AI 13
28
62
AI 12
AI 11
29
63
AI 10
AI 9
30
64
AI 8
AI 7
31
65
AI 5
32
66
AI 6 AI 4
AI 3
33
67
AI 2
AI 1
34
68
AI 0
Humidity
5 to 85% RH, Non-condensing
Universal PCI, 1 MS/s High-speed, 16-ch Analog Input, 2-ch Analog Output and 32ch DI/O Multifunction Board (RoHS).
DN-68A CR
DIN-Rail Mountable I/O Connector Block with 68-pin Female SCSI II Connector. (RoHS)
CA-SCSI15-H
68-pin SCSI-II Connector Cable, 1.5 m
ICP DAS CO., LTD.
64-bit Windows XP/2003/2008
FIFO Size
Accessories
25
32-bit Windows 7/8/10
64-bit Windows 7/8/10
Channels
Operating Temperature 0°C to +60°C
Ordering Information
32-bit Windows XP/2003/2008
Analog Output
Output Voltage
The board also includes an onboard Card ID switch that enables the board to be easily recognized via software if two or more boards are installed in the same computer.
Software
CON1
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
PCI-822LU/PCI-826LU Universal PCI, 250 kS/s, 32-channel, 12-/16-bit AD, 2-channel, 16-bit DA and 32-channel Programmable DI/O Multifunction Board PCI-822LU
Features
Introduction The PCI-822LU/826LU is a series of multifunction boards that provides high-speed Analog and Digital I/O functions, and features a continuous 250 kS/s, 12- or 16-bit resolution AD converter, an 8-kSample hardware FIFO, a 2-channel, 16-bit DA converter, and 32 programmable Digital I/O channels with DO readback. The PCI-822LU/826LU series provides either 32 singleended or 16 differential Analog Input channels that are jumper selectable, and is equipped with a high-speed PGA featuring programmable gain (1, 2, 4 or 8). The PCI-822LU/826LU series also includes an onboard Card ID switch that enables the board to be easily recognized via software if two or more boards are installed in the same computer. The pull-high/low jumpers allow the DI status to be predefined instead of remaining floating if the DI channels are disconnected or interrupted.
Model
PCI-822LU
Universal PCI (3.3 V/5 V) Interface
Supports Card ID (SMD Switch)
32 programmable DI/O Channels
Pull-high and Pull-low Resistors for DI Channels
Supports Digital Output Status Readback (Register Level)
2-channel, 16-bit Analog Output
32 Single-ended/16 Differential Analog Input Channels
12-bit 250 kS/s High-speed AD for PCI-822LU
16-bit 250 kS/s High-speed AD for PCI-826LU
Built-in MagicScan Controller
8 k sample Hardware FIFO
Supports Software and Pacer Triggers
Software Drivers 32/64-bit Windows XP/2003/2008/7/8/10
Sample Programs DOS Lib and TC Demo
PCI-826LU
LabVIEW Toolkit
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo
Analog Input Channels
32 Single-ended/16 Differential
Resolution
12-bit
Sampling Rate
250 kS/s Max.
FIFO Size
8192 Samples
Accuracy
0.1% of FSR ±1 LSB @ 25°C, ±10 V
Pin Assignments
16-bit
Analog Output
Pin Assignment
Terminal No.
AI 0
01
Channels
2
AI 1
02
Resolution
16-bit
AI 2
03
Accuracy
±6 LSB
AI 3
04
Output Driving
±5 mA
AI 4
05
Output Range
±5 V, ±10 V, 0 ~ +10 V, 0 ~ +5 V
AI 5
06
Slew Rate
8.33 V/μs
AI 6
07
AI 7
08
Programmable DIO
AI 8
09
Channels
32
AI 9
10
Compatibility
5 V/TTL
AI 10
11
Output Capability
Sink: 2.4 mA @ 0.8 V; Source: 0.8 mA @ 2.0 V
AI 11
12
AI 12
13
AI 13
14
General Bus Type
3.3 V/5 V Universal PCI, 32-bit, 33 MHz
AI 14
15
Card ID
Yes (4-bit)
AI 15
16
Connectors
Female DB37 x 1, 20-pin Box Header x 2
A_GND
17
Power Consumption
800 mA @ +5 V
Da1 out
18
Operating Temperature
0°C to +60°C
Ext_Trg
19
Humidity
5 to 85% RH, Non-condensing
20
AI 16
21
AI 17
22
AI 18
23
AI 19
24
AI 20
25
AI 21
26
AI 22
27
AI 23
28
AI 24
29
AI 25
30
AI 26
31
AI 27
32
AI 28
33
AI 29
34
AI 30
35
AI 31
36
Da2 out
37
D_GND
Pin Assignment PB 0 PB 2 PB 4 PB 6 PB 8 PB 10 PB 12 PB 14 GND +5 V
CA-2010
20-pin Flat Cable, 1 m
CA-4002
37-pin Male D-sub Connector with Plastic Cover
CA-3710DM
DB-37 Male-Male Cable, 1 m, 180° (RoHS)
DN-20
DIN-Rail Mountable 20-pin D-sub Connector Board DIN-Rail Mountable 37-pin D-sub Connector Board
[email protected]
Terminal No. 01 03 05 07 09 11 13 15 17 19
02 04 06 08 10 12 14 16 18 20
Pin Assignment PB 1 PB 3 PB 5 PB 7 PB 9 PB 11 PB 13 PB 15 GND +12 V
CON1 Pin Assignment PA 0 PA 2 PA 4 PA 6 PA 8 PA 10 PA 12 PA 14 GND +5 V
CON3
Accessories
DN-37
Pin Assignment
Terminal No. 01 03 05 07 09 10 12 14 16 18
02 04 06 08 10 12 14 16 18 20
Pin Assignment PA 1 PA 3 PA 5 PA 7 PA 9 PA 11 PA 13 PA 15 GND +12 V
Multifunction Boards > PCI-822LU/PCI-826LU
Hardware Specifications
►►►
PCI Bus
The PCI-822LU/826LU series includes an AD channel scan function called MagicScan, which eliminates the majority of the effort required to acquire AD values, such as selecting the channel, setting the gain values and the settling time, triggering the ADC, and acquiring the data. Using the built-in MagicScan and the interrupt features, these complex tasks are effectively offloaded from the CPU. Even in MagicScan mode, a different gain code can be used for each channel, and the sampling rate can still reach a total of 250 kS/s, making the PCI-822LU/826LU series especially suitable for highend applications.
PCI-826LU
CON2
Ordering Information PCI-822LU CR
Universal PCI, 250 kS/s, 32-ch 12-bit AD, 2-ch 16-bit DA and 32-ch Programmable DI/O Multifunction Board (RoHS). Includes one CA-4002 D-sub connector.
PCI-826LU CR
Universal PCI, 250 kS/s, 32-ch 16-bit AD, 2-ch 16-bit DA and 32-ch Programmable DI/O Multifunction Board (RoHS). Includes one CA-4002 D-sub connector.
Vol. IOC 2.06.06
26
PAC Products
PCI-D64HU Universal PCI, 40 MB/s, High-speed 32-channel Digital Input and 32-channel Digital Output Board
Features
Introduction The PCI-D64HU is a high-speed Digital I/O board that provides 32 Digital Input channels and 32 Digital Output channels. The high-performance design makes this card perfect for high-speed data transfer and pattern generation applications. The PCI-D64HU board performs high-speed data transfer using a busmastering DMA via the 32-bit PCI bus, with a maximum data transfer rate of up to 40 MB per second. A variety of Digital I/O transfer modes are supported, including directly programmable I/O control, timer pacer control, external clock mode and handshaking mode. The PCI-D64HU board also features a programmable digital filter for all input signals, including handshaking and trigger signals. The PCI-D64HU board is a reliable and cost-effective interface that can be used to control any high-speed peripherals connected to the host computer system.
PCI Bus
Software
32-bit Windows XP/2003/2008/7/8/10
High-speed Digital I/O Boards > PCI-D64HU
VB/VC/BCB Demo
Pin Assignments Terminal No.
01
DI 1
02
DI 2
03
DI 3
04
DI 4
05
DI 5
06
DI 6
07
DI 7
08
DI 8
09
DI 9
10
DI 10
11
DI 11
12
DI 12
13
DI 13
14
DI 14
15
DI 15
16
+5 V
17
I_ACK
18
I_REQ
19
Pin Assignment
20
DO 0
21
DO 1
22
DO 2
23
DO 3
24
DO 4
25
DO 5
26
DO 6
27
DO 7
28
DO 8
29
DO 9
30
DO 10
31
DO 11
32
DO 12
33
DO 13
34
DO 14
35
DO 15
36
GND
37
I_TRG
Pin Assignment DI 16 DI 17 DI 18 DI 19 DI 20 DI 21 DI 22 DI 23 DI 24 DI 25 DI 26 DI 27 DI 28 DI 29 DI 30 DI 31 +5 V O_ACK O_REQ N.C.
Terminal No. 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39
02 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Pin Assignment DO 16 DO 17 DO 18 DO 19 DO 20 DO 21 DO 22 DO 23 DO 24 DO 25 DO 26 DO 27 DO 28 DO 29 DO 30 DO 31 GND O_TRG N.C. N.C.
Ordering Information
27
32-channel, 5 V/TTL Digital Output
Data Transfer Rate up to 40 MB/s for each DMA Channel
Onboard 1 k/2 k DWORD FIFO for DI/DO, respectively
DO FIFO Supports Ring Buffer Mode
No Bus Loading in Repetitive Pattern Generation Applications
32-channel, 5 V/TTL Digital Input
2-channel Bus Mastering Scatter/Gather
Data Transfer Modes:
Direct Program Control, Internal Timer Pacer
External Clock (DI only), Handshaking
Hardware Specifications Channels
32
Compatibility
5 V/TTL
Input Voltage
Logic 0: 0.8 V Max., Logic 1: 2.0 V Min.
Handshaking Signals
I_REQ Input , I_ACK Output , I_TRG Input
Universal PCI, 40 MB/s High-speed 32-ch Digital Input and 32-ch Digital Output Board (RoHS). Includes one CA-4037W cable and two CA-4002 D-sub connectors.
ICP DAS CO., LTD.
Channels
32
Compatibility
5 V/TTL
Output Voltage
Logic 0: 0.55 V Max., Logic 1: 2.0 V Min.
Output Capability
Sink: 64 mA @ 0.55 V, Source: 32 mA @ 2.0 V
Handshaking Signals
O_REQ Output, O_ACK Input, O_TRG Output
Transfer Speed
40 MB/s (Max.) for DI and DO simultaneously
Timer/Counter Channels
3
Resolution
16-bit
Input Frequency
2.5 ~ 20 MHz
Timer 0
DI Clock Source
Timer 1
DO Clock Source
Timer 2
Base Clock for Timer 0 and Timer 1
Interrupts Sources
O_ACK, I_REQ, Timer 0, Timer 1 and Timer 2
Onboard FIFO Size Size in Ring Buffer Mode
1 K DWORD (32-bit) for DI 2 K DWORD (32-bit) for DO 2 ~ 2 k DWORD (32-bit), DO only
General Bus Type
3.3 V/5 V Universal PCI, 32-bit, 33 MHz
Connectors
Female DB37 x 1, 40-pin Box Header x 1
Power Consumption
200 mA @ +5 V Typical (no output load)
Operating Temperature
0°C to +60°C
Humidity
5 to 85% RH, Non-condensing
CON2
CON1
PCI-D64HU CR
Universal PCI (3.3 V/5 V) Interface
Digital Output
Sample Programs
DI 0
Digital Input
Drivers
Pin Assignment
►►►
Accessories CA-4037W
40-pin Flat and 37-pin Female D-sub Cable, 24 cm
CA-4002
37-pin Male D-sub Connector with Plastic Cover
CA-3710DM
DB-37 Male-Male Cable, 1 m, 180° (RoHS)
CA-3730DM
DB-37 Male-Male Cable, 3 m, 180° (RoHS)
DB-37
Screw Terminal for I/O Boards that use a 37-pin D-sub Connector
DN-37
DIN-Rail Mountable 37-pin D-sub Connector Board
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
PCI-FC16U Universal PCI, 16-channel Counter/Frequency Board with 32 Programmable Digital I/O Channels
Features
►►►
Universal PCI (3.3 V/5 V) Interface
Supports Card ID (SMD Switch)
32 Programmable Digital I/O Channels
Digital Filter: 1 to 32767 (μs)
16-channel Up Counter or Frequency Measurement
Pull-high and Pull-low Resistors for DI Channels
(Pulse Width = 2 μs Min.)
Introduction The PCI-FC16U is a 32-bit hardware-type high-speed Counter/Frequency board that supports both the 3.3 V and the 5 V Universal PCI bus. The card provides 16 channels that can be individually configured for either frequency measurement or up-counter applications, and can support high-frequency signals up to 250 kHz. The PCI-FC16U board also includes 32 programmable Digital I/O channels. The PCI-FC16U board includes an onboard Card ID switch that enables the board to be easily recognized via software if two or more boards are installed in the same computer. The pull-high/pull-low resistors allow the DI status to be predefined as either high or low instead of remaining floating if the DI channels are disconnected or interrupted.
Drivers
Counter/Frequency
32/64-bit Windows XP/2003/2008/7/8/10
Linux
Pin Assignments Pin Assignment C0+
01
C1+
02
C2+
03
C3+
04
C4+
05
C5+
06
C6+
07
C7+
08
N.C.
09
C8+
10
C9+
11
C10+
12
C11+
13
C12+
14
C13+
15
C14+
16
C15+
17
N.C.
18
N.C.
19
Pin Assignment 20
C0-
21
C1-
22
C2-
23
C3-
24
C4-
25
C5-
26
C6-
27
C7-
28
N.C.
29
C8-
30
C9-
31
C10-
32
C11-
33
C12-
34
C13-
35
C14-
36
C15-
37
N.C.
Pin Assignment PB 0 PB 2 PB 4 PB 6 PB 8 PB 10 PB 12 PB 14 GND +5 V
Terminal No. 01 03 05 07 09 10 12 14 16 18
02 04 06 08 10 12 14 16 18 20
Pin Assignment PB 1 PB 3 PB 5 PB 7 PB 9 PB 11 PB 13 PB 15 GND +12 V
CON1 Pin Assignment PA 0 PA 2 PA 4 PA 6 PA 8 PA 10 PA 12 PA 14 GND +5 V
CON3
Terminal No. 01 03 05 07 09 11 13 15 17 19
02 04 06 08 10 12 14 16 18 20
Pin Assignment PA 1 PA 3 PA 5 PA 7 PA 9 PA 11 PA 13 PA 15 GND +12 V
CON2
Ordering Information PCI-FC16U CR
Universal PCI, 16-channel Counter/Frequency Board with 32 Programmable DI/O Channels (RoHS). Includes one CA-4002 D-sub Connector.
[email protected]
16-channel Frequency
Resolution
32-bit
Digital Noise Filter
1 ~ 32767 μs
Min. Pulse Width
2 μs (250 kHz Max.)
I s o l a t e d I n p u t ON Voltage Level OFF Voltage
+4.5 ~ +30 VDC
Isolation Voltage
2500 VDC
ESD Protection
2 kV (Contact for each Channel)
+1 VDC Max.
Programmable DIO Channels
32
Digital I/O Input Voltage Output Voltage Output Capability
Logic 0
0.8 V (Max.)
Logic 1
2.0 V (Min.)
Logic 0
0.4 V (Max.)
Logic 1
2.4 V (Min.)
Sink
2.4 mA @ 0.8 V
Source
0.8 mA @ 2.0 V
General Bus Type
Counter/Frequency Boards > PCI-FC16U
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo
Terminal No.
16-channel Up Counter
Counter/Frequency
Sample Programs
PCI Bus
Hardware Specifications
Software
3.3 V/5 V Universal PCI, 32-bit, 33 MHz
Card ID
Yes (4-bit)
Connectors
Female DB37 x 1, 20-pin Box Header x 2
Power Consumption
700 mA @ +5 V
Operating Temperature
0°C to +60°C
Humidity
5 to 85% RH, Non-condensing
Accessories CA-2010
20-pin Flat Cable, 1 m
CA-4002
37-pin Male D-sub Connector with Plastic Cover
CA-3710DM
DB-37 Male-Male Cable, 1 m, 180° (RoHS)
DN-20
DIN-Rail Mountable 20-pin D-sub Connector Board
DN-37
DIN-Rail Mountable 37-pin D-sub Connector Board
Vol. IOC 2.06.06
28
PAC Products
Multifunction Boards PCI-1800LU/1800HU/1802LU/PCI-1802HU Universal PCI, 16/32-channel, 12-bit, 44 or 330 kS/s Multifunction Board
Universal PCI (3.3 V/5 V) Interface Analog Input Channels PCI-1802LU/HU: 32 SE/16 Diff. PCI-1800LU/HU: 16 SE/8 Diff. Hardware FIFO PCI-1802LU/HU: 8 k sample PCI-1800LU/HU: 1 k sample 2-channel, 12-bit Analog Output Supports Card ID (SMD Switch)
12-bit, 44 kS/s or 330 kS/s AD Converter Built-in MagicScan Controller Internal Trigger: Software, Pacer External Trigger: Post, Pre, Middle 16-channel 5 V/TTL Digital Output 16-channel 5 V/TTL Digital Input Pull-high and Pull-low Resistors for DI Channels High-speed data transfer rate up to 2.7 M words/ sec.
PCI-1800LU/HU
PCI-1802LU/HU
PCI-1602U/PCI-1602FU Universal PCI, 32-channel, 16-bit, 100 or 200 kS/s Multifunction Board
Universal PCI (3.3 V/5 V) Interface 32 SE/16 Diff. Analog Input Channels 16-bit, 100 kS/s or 200 kS/s AD Converter 8 k sample Hardware FIFO Built-in MagicScan Controller Internal Trigger: Software, Pacer External Trigger: Post, Pre, Middle
2-channel, 12-bit Analog Output 16-channel 5 V/TTL Digital Output 16-channel 5 V/TTL Digital Input Pull-high and Pull-low Resistors for DI Channels Supports Card ID (SMD Switch) High-speed data transfer rate up to 2.1 M words/ sec.
PCI Bus
PCI-1202LU/PCI-1202HU Universal PCI, 32-channel, 12-bit, 44 or 110 kS/s Multifunction Board
Multifunction Boards/
Universal PCI (3.3 V/5 V) Interface 32 SE/16 Diff. Analog Input Channels 12-bit, 110 kS/s or 44 kS/s AD Converter 1 k sample Hardware FIFO Built-in MagicScan Controller Internal: Software-trigger, Pacer-trigger External: Post-trigger, Pre-trigger, Middle-trigger
2-channel, 16-bit Analog Output 16-channel 5 V/TTL Digital Output 16-channel 5 V/TTL Digital Input Pull-high and Pull-low Resistors for DI Channels Supports Card ID (SMD Switch) High-speed data transfer rate up to 2.1 M words/ sec.
PIO-821LU/PIO-821HU Universal PCI, 16-channel, 12-bit, 45 kS/s Multifunction Board
Analog Input Boards
Universal PCI (3.3 V/5 V) Interface 16 SE/8 Diff. Analog Input Channels 12-bit, 45 kS/s AD Converter AD Trigger: Software, Pacer, External Triggers 1-channel, 12-bit Analog Output
16-channel 5 V/TTL Digital Output 16-channel 5 V/TTL Digital Input Pull-high and Pull-low Resistors for DI Channels Supports Card ID (SMD Switch) Interrupt Handling
Analog Input Boards PCI-1002LU/PCI-1002HU Universal PCI, 32-channel, 12-bit, 110 or 44 kS/s AD Board
Universal PCI (3.3 V/5 V) Interface 32 SE/16 Diff. Analog Input Channels 12-bit, 110 kS/s or 44 kS/s AD Converter Internal Trigger: Pacer-trigger
16-channel 5 V/TTL Digital Output 16-channel 5 V/TTL Digital Input Pull-high and Pull-low Resistors for DI Channels Supports Card ID (SMD Switch)
PISO-813U Universal PCI, 32-channel, 12-bit, 10 kS/s Isolated AD Board
29
Universal PCI (3.3 V/5 V) Interface 32 SE Analog Input Channels 12-bit, 10 kS/s AD Converter AD Trigger: Software-trigger
ICP DAS CO., LTD.
Built-in DC/DC Converter with 3000 VDC Protection 3750 Vrms Bus Isolation Protection Supports Card ID (SMD Switch)
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
Analog Output Boards PISO-DA2U Universal PCI, 12-bit, 2-channel Isolated Analog Output Board
Universal PCI (3.3 V/5 V) Interface 12-bit, 2-channel Analog Output 3750 VDC Bus and Channel Isolation Protection 3000 VDC Power Isolation Protection Voltage Output: ±10 V, ±5 V, 0 ~ +10 V, 0 ~ +5 V Current Output: 0 ~ +20 mA, +4 ~ +20 mA
Two Timer-triggered Interrupt Sources Calibration data stored in EEPROM Double-buffered DA Latch Software Calibration Supports Card ID (SMD Switch)
PIO-DA4U/PIO-DA8U/PIO-DA16U Universal PCI, 14-bit, 4/8/16-channel Analog Output Board
Universal PCI (3.3 V/5 V) Interface 14-bit, 4/8/16-channel Analog Output Voltage Output: ±10 V Current Output: 0 ~ +20 mA Two Timer-triggered Interrupt Sources
Software Calibration Double-buffered DA Latch 16-channel 5 V/TTL DO, 16-channel 5 V/TTL DI Pull-high and Pull-low Resistors for DI Channels Supports Card ID (SMD Switch)
PISO-DA4U/PISO-DA8U/PISO-DA16U Universal PCI, 14-bit, 4/8/16-channel Isolated Analog Output Board
Software Calibration Two Timer-triggered Interrupt Sources Double-buffered DA Latch 16-channel 5 V/TTL DO, 16-channel 5 V/TTL DI Pull-high and Pull-low Resistors for DI Channels Supports Card ID (SMD Switch)
Non-isolated Digital I/O Boards Universal PCI, 24/56/48/64/96/144/168-channel Digital I/O Board
Universal PCI (3.3 V/5 V) Interface Emulates Industrial-standard 8255 PPI Ports (Mode 0) (PIO-D24U/D56U/D48U/D96U/D144(L)U/D168U) High-driving Output Capability (PIO-D24U/D56U/D48U/D96U/D144(L)U/D168U)
24/48/56/64/96/144/168-channel DI/O Interrupt Handing Capability Supports Card ID (SMD Switch) DI/O Response Time approximately 1 μs (1 MHz)
PIO-D96SU/D48SU Universal PCI, 48/96-channel Digital I/O Board with SCSI-II Connector
Universal PCI (3.3 V/5 V) Interface 48/96-channel DIO Emulates Industrial-standard 8255 PPI Ports (Mode 0) 4-channel Interrupt Source Pull-high and Pull-low Function for DI Channels
Supports DO Status Readback (Register Level) Supports Card ID (SMD Switch) DI/O Response Time approximately 1 μs (1 MHz) Includes one SCSI-II 100-pin Connector
PCI-TMC12AU Universal PCI, 12-channel Timer/Counter Board with Digital I/O
Universal PCI (3.3 V/5 V) Interface 16-bit Timers/Counters can be cascaded to create a 32/48-bit Timer/Counter 16-channel 5 V/TTL DO, 16-channel 5 V/TTL DI Gate Input can be sourced from either External or Previous Timer/Counter Output More Flexible Interrupt Mechanism
4 Onboard 8254 Timer/Counter Chips 12 Independent 16-bit Timers/Counters 12 External Clock Input Channels 12 Timer/Counter Output Channels 2 Internal Clock Sources, 4 Interrupt Sources Hardware Mechanism to generate two Starting Clocks
Memory Boards PCI-M512U Universal PCI, 512 KB Memory Board with Digital I/O
Universal PCI (3.3 V/5 V) Interface Two Li-ion Batteries to prevent loss of SRAM Data 512 KB Onboard SRAM
Analog Output Boards/ Non-isolated Digital I/O Boards/ Memory Boards
PIO-D24U/D56U/D48U/D64U/D96U/D144U/D144LU/D168U
PCI Bus
Universal PCI (3.3 V/5 V) Interface 14-bit, 4/8/16-channel Analog Output 2500 VDC Bus and Power Isolation Protection Built-in DC/DC Converter with 3000 VDC Protection Voltage Output: ±10 V Current Output: 0 ~ +20 mA
LED Indicators to monitor Battery Status 16-channel 5 V/TTL DO, 12-channel 5 V/TTL DI 4-bit Battery Status Readback (DI0~3)
[email protected]
Vol. IOC 2.06.06
30
PAC Products
Isolated Digital I/O Boards PISO-1730U/PISO-P32C32U/PISO-P32C32U-5V
PISO-1730U
Universal PCI, 32-channel Optically-isolated Digital Input and 32-channel Opticallyisolated Open-collector Digital Output Board (Sink, NPN)
Universal PCI (3.3 V/5 V) Interface 32-channel Optically-isolated Digital Input PISO-1730U/PISO-P32C32U: Logic High +9 ~+24 V PISO-P32C32U-5V: Logic High +5 ~ +12 V Built-in DC/DC Converter with 3000 VDC Isolation 3750 Vrms Photo-isolation Protection
32-channel Optically-isolated Digital Output Current Sinking (NPN) Supports Card ID (SMD Switch) Supports DO Status Readback (Register Level) DIO Response Time approximately 250 μs (4 kHz)
PISO-P32C32U PISO-P32C32U-5V
PISO-P32A32U/PISO-P32A32U-5V Universal PCI, 32-channel Optically-isolated Digital Input and 32-channel Opticallyisolated Open-collector Digital Output Board (Source, PNP)
Universal PCI (3.3 V/5 V) Interface 32-channel Optically-isolated Digital Input PISO-P32A32U-5V: Logic High +5 ~ +12 V PISO-P32A32U: Logic High +9 ~ +24 V 32-channel Optically-isolated Digital Output Current Sourcing (PNP)
Built-in DC/DC Converter with 3000 VDC Isolation 3750 Vrms Photo-isolation Protection Supports DO Status Readback (Register Level) Supports Card ID (SMD Switch) DI/O Response Time approximately 250 μs (4 kHz)
PCI Bus
PISO-P32S32WU Universal PCI, 32-channel Optically-isolated Digital Input and 32-channel Opticallyisolated Open-collector Digital Output Board (Sink, NPN, 8-channel High-driving)
Isolated Digital I/O Boards
Universal PCI (3.3 V/5 V) Interface 32-channel Optically-isolated Digital Input Maximum Input Range 30 VDC 3750 Vrms Photo-isolation Protection Supports Card ID (SMD Switch)
32-channel Optically-isolated Digital Output Current Sinking (NPN) 500 mA (8-channel) High-driving 100 mA (24-channel) Driving DIO Response Time approximately 250 μs (4 kHz)
PISO-P64U/PISO-P64U-24V Universal PCI, 64-channel Optically-isolated Digital Input Board
Universal PCI (3.3 V/5 V) Interface 64-channel Optically-isolated Digital Input PISO-P64U: Logic High +5 ~ +15 V PISO-P64U-24V: Logic High +20 ~ +28 V 4 Isolated Banks when using 4 Isolated External Power Supplies
Jumper-selectable Internal or External Power Source for DI Built-in DC/DC Converter with 3000 VDC Isolation 3750 Vrms Photo-isolation Protection Supports Card ID (SMD Switch) DI Response Time approximately 250 μs (4 kHz)
PISO-C64U/PISO-A64
PISO-C64U
Universal PCI/PCI, 64-channel Optically-isolated Digital Output Board (Sink/Source)
PISO-C64U: Universal PCI (3.3 V/5 V) Interface 64-channel Optically-isolated Open-collector Digital Output (Sink, NPN) Supports Card ID (SMD Switch) Supports DO Status Readback (Register Level) DO Response Time approximately 250 μs (4 kHz Max.)
PISO-A64: PCI (5 V) Interface 64-channel Optically-isolated Open-collector Digital Output (Source, PNP) 3750 Vrms Photo-isolation Protection 4 Isolated Banks when using 4 Isolated External Power Supplies
PISO-A64
PISO-730U/PISO-730U-5V Universal PCI, 32-channel Isolated Digital I/O and 32-channel TTL Digital I/O Board (Sink, NPN)
31
Universal PCI (3.3 V/5 V) Interface 16-channel Optically-isolated Digital Input PISO-730U: Logic High +9 ~ +24 V PISO-730U-5V: Logic High +5 ~ +12 V 16-channel Optically-isolated Digital Output Current Sinking (NPN) 2 Interrupt Sources
ICP DAS CO., LTD.
Built-in DC/DC Converter with 3000 VDC Isolation 3750 Vrms Photo-isolation Protection 16-channel 5 V/TTL Digital Output 16-channel 5 V/TTL Digital Input Supports DO Status Readback (Register Level Supports Card ID (SMD Switch)
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
PISO-730A/PISO-730A-5V PCI Bus, 32-channel Isolated Digital I/O and 32-channel TTL Digital I/O Board (Source, PNP)
PCI (5 V) Interface 16-channel Optically-isolated Digital Input PISO-730A: Logic High +9 ~ +24 V PISO-730A-5V: Logic High +5 ~ +12 V 16-channel Optically-isolated Digital Output Current Sourcing (PNP)
3750 Vrms Photo-isolation Protection 16-channel 5 V/TTL Digital Output 16-channel 5 V/TTL Digital Input 2 Interrupt Sources
PCI-P16C16U Universal PCI, 16-channel Isolated Digital Input and 16-channel Open-collector Digital Output Board (Sink, NPN)
Universal PCI (3.3 V/5 V) Interface Supports Card ID (SMD Switch) 16-channel Optically-isolated Digital Input AC Signal Input with Filter Selectable DC Signal Input Filter
16-channel Open-collector Digital Output Current Sinking (NPN) 5000 Vrms Photo-isolation Protection External Power Status LED Indicator
PCI-P8R8U/PCI-P16R16U
PCI-P8R8U
Universal PCI, 8/16-channel Isolated Digital Input and 8/16-channel Relay Output Board
Optically-isolated Digital Input PCI-P8R8U: 8 Channels PCI-P16R16U: 16 Channels 5000 Vrms Photo-isolation Protection Selectable DC Signal Input Filter AC Signal Input with Filter
PCI-P16R16U
PCI Bus
Universal PCI (3.3 V/5 V) Interface Supports Card ID (SMD Switch) Relay Output PCI-P8R8U: 8 Channels (4 x Form C, 4 x Form A) PCI-P16R16U: 16 channels (8 x Form C, 8 x Form A)
PCI-P16POR16U Universal PCI, 16-channel Isolated Digital Input and 16-channel PhotoMOS Relay Output
Universal PCI (3.3 V/5 V) Interface LED Power Indicator Supports Card ID (SMD Switch) 16-channel Optically-isolated Digital Input 5000 Vrms Photo-isolation Protection Selectable DC Signal Input Filter AC Signal Input with Filter
High-speed DIO Operation 16-channel PhotoMOS Relay Output Long-life, High-reliability PhotoMOS Relay Low leakage current when PhotoMOS Relay is OFF No Acoustical Noise No Contact Bounce and Sparking
PISO-P8R8U/PISO-P8SSR8AC/PISO-P8SSR8DC
PISO-P8R8U
Universal PCI/PCI, 8-channel Isolated Digital Input and 8-channel Electromechanical/
Isolated Digital I/O Boards
Board
Solid-state Relay Output Board
PISO-P8R8U: Universal PCI (3.3 V/5 V) Interface Supports Card ID (SMD Switch) 8-channel Electromechanical Relay Output 8-channel Optically-isolated Digital Input 5000 Vrms Photo-isolation Protection Selectable DC Signal Input Filter AC Signal Input with Filter
PISO-P8SSR8AC/P8SSR8DC: PCI (5 V) Interface 8-channel Solid-state Relays (SSR) Output Decreased Electrical Noise During Relay Switching 3750 Vrms Photo-isolation Protection Onboard Relay Output Status LED Indicators
PISO-P8SSR8AC SO 8SS 8 C
PISO-P8SSR8DC
PISO-P16R16U Universal PCI, 16-channel Isolated Digital Input and 16-channel Relay Output Board
Universal PCI (3.3 V/5 V) Interface Supports Card ID (SMD Switch) 16-channel Relay Output
16-channel Optically-isolated Digital Input 3750 Vrms Photo-isolation Protection Selectable DC Signal Input Filter AC Signal Input with Filter
PISO-725 PCI Bus, 8-channel Isolated Digital Input and 8-channel Relay Output Board
PCI (5 V) Interface 8-channel Electromechanical Relay Output Supports Relay Output Status Readback Onboard Relay Output Status LED Indicators
8-channel Optically-isolated Digital Input 3750 Vrms Photo-isolation Protection State-changed Interrupt for all Digital Inputs Jumper-selectable Isolated or Non-isolated Digital Input
[email protected]
Vol. IOC 2.06.06
32
ISA Bus Data Acquisition Boards Multifunction Boards
A-823PG Model
L
A-826PG
A-822PG
H
L
A-821PG H
Interface
L
H
A-812PG
A-8111
ISA Bus
Analog Input Resolution
16-bit
12-bit
12-bit
12-bit
12-bit
12-bit
SE
16
16
16
16
16
8
Diff.
8
8
8
8
-
-
100 kS/s
125 kS/s
125 kS/s
45 kS/s
62.5 kS/s
35 kS/s
Bipolar
Bipolar/Unipolar
Bipolar/Unipolar
Bipolar
Bipolar
Bipolar
Resolution
12-bit
12-bit
12-bit
12-bit
12-bit
12-bit
Channels
2
2
2
1
2
2
0 ~ +10, 0 ~ +5
±10, ±5, 0 ~ +10, 0 ~ +5
0 ~ +10, 0 ~ +5
0 ~ +10, 0 ~ +5
0 ~ +10, 0 ~ +5
0 ~ +10, 0 ~ +5
DI Channels
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
DO Channels
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
Channels
Sampling Rate Input Range Analog Output
Voltage Output Range (V) Digital Input/Output
PCI Bus
Timer/Counter Channels
3
3
3
3
3
3
Resolution
16-bit
16-bit
16-bit
16-bit
16-bit
16-bit
A-626
A-628
12-bit
12-bit
12-bit
6
6
8
-
-
ISA Bus
Analog Input/Output Boards
Multifunction & Analog Input/Output Boards
ISO-AD32 L
Model
ISO-DA
H
ISO-813
8
16
Interface
A-726
ISA Bus
Analog Input Resolution Channels
12-bit
12-bit
SE
32
32
-
Diff.
16
-
-
Sampling Rate
200 kS/s
10 kS/s
-
1k
-
-
Input Range
Bipolar/Unipolar
Bipolar/Unipolar
-
Bus Isolation
500 Vrms
3000 VDC
-
FIFO Size
125 kS/s
-
Analog Output Resolution
-
Channels
-
14-bit 8
Isolation Voltage
16 2500
Voltage Output Range (V)
-
Current Output Range (mA)
VDC
-
± 10
±10, ±5, 0 ~ +10, 0 ~ +5
0 ~ +20
+4 ~ +20
Digital Input/Output DI Channels
-
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
DO Channels
-
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
16 (5 V/TTL)
I/O Connector
33
20-pin Header
-
-
2
4
2
2
37-pin D-sub
1
1
1
-
1
1
ICP DAS CO., LTD.
Professional Provider of High-quality Industrial Computer Products and Data Acquisition Systems
Vol. IOC 2.06.06
PAC Products
http://www.icpdas.com
Isolated Digital Input/Output Boards
Model
P16R16DIO
P8R8DIO
ISO-P32C32
ISO-P32S32W
Interface
ISO-P64
ISO-C64
ISO-730
3750 Vrrms
ISA Bus
Digital Input Isolation Voltage
5000 Vrms
Channels
16
8
Compatibility Input Voltage
3750 Vrms
3750 Vrms
3750 Vrms
-
32
32
64
-
16
-
Optical
Photocoupler
Optical
Logic 0
0~1V
0~1V
0~1V
0~1V
-
0~1V
Logic 1
5 ~ 24 V
9 ~ 24 V
5 ~ 24 V
9 ~ 24 V
-
9 ~ 24 V
-
3750 Vrms
3750 Vrms
-
3750 Vrms
3750 Vrms
Digital Output Isolation Voltage Channels
-
32
32
-
64
16
Compatibility
-
Sink (NPN)
Sink (NPN)
-
Sink (NPN)
Sink (NPN)
Output Capability
-
100 mA/30 V
500 mA (Max.)
-
100 mA/30 V
100 mA/30 V
Relay Output 8 x Form C 8 x Form A
Channels
4 x Form C 4 x Form A
-
Contact Rating
-
Non-isolated Digital Input/Output DI Channels
-
16 (5 V/TTL)
DO Channels
-
16 (5 V/TTL)
DIO-24
DIO-48
DIO-64/3
Interface
DIO-64/6
DIO-96
DIO-144
TMC-10
-
96 (5 V/TTL)
144 (5 V/TTL)
-
32 (5 V/TTL)
-
-
-
-
-
8 (5 V/TTL)
ISA Bus
Programmable Digital Input/Output Channels
24 (5 V/TTL)
48 (5 V/TTL)
-
-
-
32 (5 V/TTL)
Digital Input Channels
Logic 0: 0.8 V Max. Logic 1: 2.0 V Min.
Input Voltage Digital Output Channels
-
-
32 (5 V/TTL)
32 (5 V/TTL) Logic 0: 0.4 V Max. Logic 1: 2.4 V Min.
Output Voltage
Sink: 0.8 mA @ 0.8 V Source: -2.4 mA @ 2.0 V
Output Capability Timer/Counter 16-bit Channels
-
1
3
6
-
-
8
32-bit Channels
-
1
-
-
-
-
2
Input Frequency
-
10 MHz
10 MHz
10 MHz
-
-
10 MHz
Isolated/Non-isolated Digital Input/Output Boards
Model
ISA Bus
Non-isolated Digital Input/Output Boards
PCI Bus
AC:120 V @ 0.5 A DC: 24 V @ 1 A
I/O Connector 20-pin Header
2
-
5
5
-
-
-
37-pin D-sub
-
-
-
-
-
-
1
40-pin Header
-
-
-
-
-
-
-
50-pin Header
1
2
-
-
4
6
-
[email protected]
Vol. IOC 2.06.06
34
ICP DAS Catalogs & Brochures High Reliability Industrial Ethernet Switch Catalog
Industrial Communication & Networking Products Catalog
Managed Ethernet Switches Unmanaged Ethernet Switches PoE Ethernet Switches Media Converters Real-time Redundant Ring Ethernet Switches IP67 Waterproof Switches Cyber-Ring Ethernet Self-healing Technology
PAC Products Catalog
Industrial Fieldbus
XP-8000-Atom Series XP-8000 Series WP-8000 Series LP-8000 Series iP-8000 Series ViewPAC Series MotionPAC Series I/O Expansion Units I/O Modules 5000 Series 7188/7186 Series
Remote I/O Modules and I/O Expansion Units Products Catalog
RS-485 Products Ethernet Remote I/O Modules FRnet I/O Modules CAN Bus Products PROFIBUS Remote I/O Modules HART Products Smart Power Meters WISE I/O Modules
Intelligent Multifunction IoT Controller Intelligent Data Logger I/O Controller Intelligent I/O Module
RS-485 Industrial Ethernet Profinet CAN Bus CANopen DeviceNet J1939 PROFIBUS HART Ethernet/IP BACnet
Energy Management Solution - PMMS Brochure
A Web-based Intelligent PAC Controller - WISE Brochure
Multi-port Serial Cards Programmable Device Servers (Serial-toEthernet) Converters, Repeaters and Hubs Fieldbus Solutions Ethernet Switches
Smart Power Meter Concentrator Smart Power Meter True RMS Input Module TouchPAD Devices - VPD Series GPS Solutions
ICP DAS CO., LTD. Taiwan (Headquarters) www.icpdas.com
[email protected] TEL: +886-3-597-3366 FAX: +886-3-597-3733
Local Distributor
China www.icpdas.com.cn
[email protected]
TEL: +86-21-6247-1722
FAX: +86-21-6247-1725
USA www.icpdas-usa.com
[email protected]
TEL: +1-310-517-9888
FAX: +1-310-517-0998
Europe www.icpdas-europe.com
[email protected]
TEL: +49 (0) 7121-14324-0
FAX: +49 (0) 7121-14324-90
