Transcript
A WINNING COMBINATION: HIGH-QUALITY DESIGN & EASIER HANDLING The new Norton Clipper CE414-350 electric high-speed hand-held saw is stronger than the competition. Its powerful 4.2HP motor delivers on the jobsite with a fast cut and ease of operator use. Add on unique design features that keep your saw from motor damage or stalling out and your maintenance needs become fewer and far between. Finish with an unprecedented warranty and you’ll wonder why you’d choose anything but Norton.
CE414-350 ELECTRIC HIGH-SPEED HAND-HELD SAW
FEATURES & BENEFITS Protection
StableStart
Design
• Thermal protection for low voltage and amperage overload conditions
• Prevents unintentional circuit breaker trips during start-up
• Strongest motor in class
• LED lights show unit is connected to electrical supply
• Motor slowly builds speed during start-up
• Overload indicator light turns red in excessive conditions • Electronic clutch protects motor and gear set from damage • GFCI (Ground-Fault Circuit Interrupter) protects operator from electric shock
Technical Specifications Product Number Blade Guard Capacity - in (mm) Maximum Depth of Cut - in (mm) Arbor Size - in (mm) Blade Flange Diameter - in (mm) Blade Shaft RPM Blade Shaft Bearings Blade Shaft Drive Control Chassis Power Source Motor/Engine Type Specifications Maximum Horsepower1 Net Horse Power1 Max. Torque ft lbs (Nm) Starter Engine Cooling LED Overload Indicator IC Soft Start Thermal Overload Protection Cord Length - ft (m) Clutch Saw Dimensions Height - in (mm) Saw Width - in (mm) Maximum Saw Length (Working) - in (mm) Weight - Uncrated - lbs (kg) = Data Provided by Motor/Engine Manufacturer
1
• Smoother start provides better operator control
Maintenance 701846 94536 3 14" (356) 5" (125) 1 (25.4) / .78 (20) 3.93 (100) 3,800 Heavy Duty Sealed Gear Drive Hand Held Electric 115v/60/1 Electric Norton Clipper CE414-350 4.2 HP (3,100w) 4.2 HP (3,100w) 2.5 (3.4) Electric Forced Air Yes Yes Yes 9.8 (3) Yes 11.1 (282) 11.3 (286) 22.8 (730) 22.4 (10.2)
• • •
• •
Use a soft bond low diamond concentration blade for best performance. Let the tool work for you. DO NOT FORCE IT. Avoid low voltage from bad power supplies or generators. Run on 115v to 120v 20A circuits for best results. Recommend a 4,000W generator min. Replace brushes when performance changes or when the brush measures less than 7/16" long. Replace air filter when dirty or when customer experiences a decrease in performance.
• Better ergonomics for easier operation • Wet and dry applications delivers versatility
Warranty • • •
Highest warranty period in the industry Full 6 months Applies to CE414-350, GC25EUP, and electric masonry models
Cleaning and Care • •
• •
• •
Like all power tools, clean after each use for best performance. Only use environmentally friendly cleaning products that are safe for Nylon, Plastics, Aluminum, and Magnesium. Never use fuel to clean! NEVER pressure wash any electrical power tool. Remove material deposits from inside the blade guard with an object that will not damage the blade guard. Clean and inspect the blade shaft (spindle) and blade collars (flanges). The blade collars should be one piece, flat with recess, free of all debris and all foreign material, free of damage, and are the correct size.
• Recommended extension cables: 12 AWG - 50',
Norton Silencio is the ideal companion blade to the CE414-350. The patent-pending steel center design reduces cutting noise by up to 15dB(A) making it safer for high traffic environments and less disruptive to work locations.
10 AWG - 75', 8 AWG - 100'.
For more portability and power see our CP500 gas saw series. Available in two 12” and 14” blade capacity models: standard and iLube, the world’s first patented automatic lubrication system that mixes oil and fuel electronically for maximum efficiency. No more premixing.
PRIMARY SPONSOR
youtube.com/NortonConstruction | nortonconstructionproducts.com USA CUSTOMER SERVICE: Toll Free Phone: 1 (800) 554-8003 Toll Free Fax: 1 (800) 443-1092
CANADA CUSTOMER SERVICE: Toll Free Phone: 1 (800) 263-6565 Toll Free Fax: 1 (800) 561-9490
FORM #8622 REV. 04/16 © Saint‑Gobain April 2016. Norton, Clipper and “Reshaping Your World” are registered trademarks; “All The Muscle You Need”, Silencio, and StableStart are trademarks of Saint‑Gobain Abrasives.
