Transcript
Two-Space Rack Shelf for Lynx Hilo Converters The Hilo Rack (model LYN-HILORACK-RTL) is the ideal solution for rack-mounting one or two Hilo converters from Lynx Studio Technology. Heavier than most rack shelves, the Hilo Rack is made of 16 gauge steel with a black powder coat finish. Designed to hold one or two Hilo converters, the Rack is predrilled with 12 indented holes perfectly positioned for one Hilo converter to be mounted left, right, center, or two units on the left and right. Hilos are mounted using the same screw holes as the feet on the Hilo. The Rack is shipped with simple instructions for the five minute installation. The rack with Hilos installed takes up exactly two spaces on a standard 19” rack.
The rack was custom designed and built in the US. The side cooling louvers are sized to offer maximum cooling via Hilo’s side vents. The lipless front of the shelf allows Hilos to be installed with minimal clearance on the top.
The back panel of the rack has several convenient slots and holes for cable wrapping, tying and securing cables coming off Hilo. The 16 gauge steel is strong enough to securely hold a wide range of cables.
Holes are predrilled and recessed to give you the option of having two Hilos installed or a single Hilo in the left, right or center position.
Lynx Studio Technology, Inc.
Phone: 714-545-4700 • www.lynxstudio.com •
[email protected]
