Transcript
Thanks for shopping with Improvements!
26” Poinsettia Wreath Item #510054
PARTS LIST: Wreath 2 spare LED bulbs
NOTES: 3 AA batteries required (not included) Suitable for indoor / outdoor use Save carton for future storage
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. Step 1: Use care to remove Wreath from box. The Wreath is one piece, already preassembled with LED Lights. Step 2: Locate battery box on Wreath. Open battery box by unfastening the clips on the sides. Insert 3 “AA” batteries (not included) with correct polarity (+ and -) placements. Close battery box by fastening clips securely and ensure gasket is in position to keep out water. Place battery box inside foliage in a secure location without falling out. Step 3: Reshape foliage as required. Hang Wreath in desired location on a sturdy hook or nail (not included). Suitable for indoor or outdoor use. Step 4: To activate LED lights, press the On/Off Button on the front the battery box. Timer is preset for LED lights to stay on for 6 hours and turn off automatically for 18 hours. To deactivate LED lights and timer at any time, push the On/Off Button again. We recommend first activating your lights at the time you want them to come on each day. Pushing the On/Off Button again will turn the lights and timer off.
To order, call 1-800-642-2112 West Chester, OH 45069
Made in China 08/15
If you have questions regarding this product, call 1-800-642-2112 Mon.-Fri. 9:00-5:00 EST (Ohio) and ask for our product specialists, or e-mail:
[email protected] See many more products on the Internet!
www.ImprovementsCatalog.com
CARE INSTRUCTIONS Dust gently using a soft cloth or fabric duster. Do not use any chemicals or solvents to clean. Handle LED light string gently. Do not pull or tug light string as this may inadvertently loosen the bulbs. NOTE: After product is used outdoors, if storage is needed, allow product to air out and dry thoroughly prior to re-packing. Remove batteries prior to storage. SAFETY INSTRUCTIONS
WARNING! This is not a toy. For decorative use only. Keep out of reach of children. This seasonal use product is not intended for permanent installation or use. Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. Do not use this product for other than its intended use. Read and follow all instructions that are on the product or provided with the product. BATTERY INSTRUCTIONS Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the device prior to battery installation. Ensure the batteries are installed correctly with regard to polarity (+ and -). Remove batteries from equipment which is not to be used for an extended period of time. Remove used batteries promptly. For recycling and disposal of batteries to protect the environment, please check the internet or your local phone directory for recycling centers and / or follow local government regulations. TROUBLESHOOTING FOR BATTERY-OPERATED LED LIGHTS
1. Push the On/Off button on the Battery Box. Check to ensure rubber protection over button intended to keep out water is not damaged. 2. Check to ensure all batteries are fresh and in correct polarity (+ and -) positions. 3. Check for loose bulb or poor contact into bulb socket. Follow each bulb on light string to ensure each bulb is seated firmly inside each socket with its tab securely “locked” into the notch located on one side of the socket. DO NOT TWIST BULBS. 4. Check for any broken, burned out, or missing bulbs and replace as needed. 5. Replace non-working or missing or broken bulb as soon as discovered to avoid reducing the longevity of the light set. 6. Replace only with bulbs that come with this product. To Remove a Bulb: Undo bulb locking tab on one side of socket (see Figure 1). Gently grasp the plastic base of bulb. Do not pull on the glass bulb section. Pull up and out from socket. To Replace a Bulb: Align base of bulb and locking tab to socket. Push in until firmly seated. Lock tab securely. DO NOT TWIST BULB.
Figure 1 Locking Tab
E
Made in China
