Transcript
HINIKER SPREADER
HINIKER SPREADER PARTS BOOK FOR MODEL NUMBERS 1000, 975, 955, 835, 825, 815, 775, 635, 625, 615, 600 MODEL YEAR 2007-
SECTION 1
GASOLINE ENGINE SPREADER COMPONENTS (MODELS 825/815/625/615)
SECTION 2
ELECTRIC CONVEYOR SPREADER COMPONENTS (MODELS 835/635)
SECTION 3
ELECTRICAL AUGER SPREADER COMPONENTS (MODEL 975/955/775)
SECTION 4
RECEIVER HITCH SPREADER COMPONENTS (MODELS 1000/600)
PART NUMBER 79203025 Rev. F
Part Number 79203025 Rev. F
PARTS September 2016
It is the policy of Hiniker Company to constantly improve its products whenever it is practical to do so. Hiniker Company must therefore reserve the right to redesign or change its equipment or component parts thereof without incurring the obligation to install or furnish such changes on the equipment previously delivered. INSTRUCTIONS FOR ORDERING PARTS 1. The reference numbers (Ref. No.) in the illustrations correspond to the same reference numbers (Ref. No.) in the description list. An assembly having a part number can be ordered. All other parts must be ordered individually. The quantity in the “Qty.” column is the number of parts used in this area of the machine. The term “A/R” for number required indicates “as required” where the quantity may vary. Order all parts by their part number and description. Do not use the reference number (Ref. No.). 2. All references to left and right, front and rear apply to the machine as viewed from the rear of the machine, facing forward in the direction of travel. 3. Always mention the identification number of the model and serial numbers found on the name plate of the unit on which the part is to be used. Much delay and confusion can be avoided when correct numbers are specified on parts order and correspondence.
Parts Books/Hiniker/79203025RevF
HINIKER COMPANY 58766 240th St. P.O. BOX 3407 MANKATO, MN 56002-3407 USA Phone: (800) 433-5620 Fax: (800) 637-3991 E-Mail:
[email protected]
HINIKER GASOLINE ENGINE SPREADER
S E C
1
SECTION 1 GASOLINE DRIVEN SPREADER COMPONENTS (MODELS 825/815/625/615) PAGE 2
HOPPER ASSEMBLY
PAGE 4
DISCHARGE CHUTE ASSEMBLY
PAGE 5
ELECTRICAL ASSEMBLY
PAGE 6
ENGINE ASSEMBLY
PAGE 7
GEARBOX ASSEMBLY
PAGE 8
FRONT SHAFT AND APRON CHAIN ASSEMBLY
OPTIONAL EQUIPMENT
PAGE 9
INVERTED V
PAGE 10
HINGED HOPPER GRIDS
PAGE 10
TARP KIT
PAGE 11
TIE DOWN KIT
PAGE 11
BRAKE LIGHT KIT
9/16
Page 1
S E C
HINIKER GASOLINE ENGINE SPREADER HOPPER ASSEMBLY
1
DWG. NO. 6035 Page 2
9/16
HINIKER GASOLINE ENGINE SPREADER REF. PART NO. NUMBER 1 79202532 79202416 2 79202554 79202451 3 79202521 79202452 4 79202401 5 951-001-005 061910 6 952-001-007 033-29011 7 950-001-106 950-001-344 8 951-001-007 061923 9 79202477 10 952-003-006 061916 11 79201694 12 79202527 79202440 13 951-005-051 14 950-001-105 950-001-286 15 79202399 79202398 16 79202469 17 79202405 18 79202453 19 79202472 20 79202396 21 79202404 22 79203165 23 50205016 24 79203147 25 79202459 26 79202406 27 951-001-008 061937 28 950-001-199 950-001-346 29 952-001-004 061925 30 950-001-231 950-001-288 31 950-001-125 950-001-347 32 10304 951-003-012 33 79202457 34 950-001-242 35 79202520 79202463 36 79202522 79202465
DESCRIPTION 6 1/2 Ft SS Hopper Weldment 8 Ft SS Hopper Weldment Lever Nut SS Lever Nut Battery Bracket SS Battery Bracket Battery Hex Nut 3/8-16 Hex Nut 3/8-16 SS Lock Washer 3/8 Med Split SAE Lock Washer 3/8 Med Split SS Hex Head Cap Screw 3/8-16 x 1 1/4 Gr 5 Hex Head Cap Screw 3/8-16 x 1 1/4 SS Hex Nut 1/2-13 Hex Nut 1/2-13 SS Trim 1 1/2 Inch Flat Washer 3/8 SAE Flat Washer 3/8 SAE SS Chain Wiper Cover Weldment SS Cover Weldment Lock Nut 3/8-16 Hex Head Cap Screw 3/8-16 x 1 Gr. 5 Hex Head Cap Screw 3/8-16 x 1 SS Apron Chain Assembly 6 1/2’ (See Sec. 1 P. 8) Apron Chain Assembly 8’ (See Sec. 1 P. 8) Drive Shaft Weldment 2-Bolt Flange 206-18 Coupler Sprocket 40B24 Gearbox (See Sec. 1 P. 7) 2-Bolt Flange 205-16 Replacement Clutch Kit Includes Items (24, 49, 72-76) Sprocket #40 60T Shaft Locking Collar 1“ Bore Idler Weldment Take Up Bearing 205-16 Nut-Hex 5/8-11 Nut-Hex 5/8-11 SS Hex Head Cap Screw 5/8-11 x 6 Full Thread Hex Head Cap Screw 5/8-11 x 6 Full Thread SS Lock Washer 1/2 Med Split SAE Lock Washer 1/2 SS Hex Head Cap Screw 1/2-13 x 1 Gr. 5 Hex Head Cap Screw 1/2-13 x 1 SS Hex Head Cap Screw 1/2-13 x 1 1/2 Gr. 5 Hex Head Cap Screw 1/2-13 x 1 1/2 SS Lock Nut 1/2-13 Lock Nut 1/2-13 Nylon Insert SS Spacer Hex Head Cap Screw 3/8-16 x 2 Gr. 5 Full Thread Feed Gate SS Feed Gate Top Chute Mount SS Top Chute Mount
REF. QTY. NO. 1 37 1 38 1 39 1 40 1 41 1 42 1 43 A/R 44 A/R A/R 45 A/R A/R 46 A/R 47 2 2 48 2 A/R 49 A/R 1 50 1 51 1 52 A/R 53 A/R 54 A/R 55 1 56 1 57 1 2 58 1 1 59 1 2 60 1 61 1 62 1 1 63 2 64 2 65 2 66 2 67 2 68 4 69 4 70 4 4 71 2 2 72 1 1 73 1 74 1 75 1 76 1 77 1 1
9/16
PART NUMBER 79202523 79202456 953-003-003 79202464 79202741 79202474 79202519 030-16041 950-003-080 951-005-036 951-002-011 79202458 79202524 79202466 950-003-029 950-003-067 952-001-002 061917 031-06113 951-005-089 031-06005 79202446 79202475 79202476 031-23016 951 -005-089 061605 85501786 79204094 79202024 79204093 715-04016 79203337 952-002-011 952-004-062 367-001-014 71504138 720-02126 953-002-039 720-02128 702-53004 952-004-052 950-001-117 950-001-334 950-001-108 950-001-314 950-001-232 950-001-350 79203162 79203161 79203163 79203160 950-001-089 031-09103
DESCRIPTION
QTY.
Chute Pivot SS Shaft Coupler Slotted Spring pin 1/4 x 1 3/4 Top Spinner Shaft Pillow Block Bearing (Exposed Grease Zerk) Sprocket 40B18 Clevis SS Carriage Bolt 5/16-18 x 3/4 Gr. 5 Carriage Bolt 5/16-18 x 3/4 SS Mac Lock Nut 5/16-18 Whiz Lock Nut 5/16-18 SS Front Wiper Lever Weldment SS Lever Weldment Carriage Bolt 3/8-16 x 1 Gr. 5 Carriage Bolt 3/8-16 x 1 SS Lock Washer 5/16 Med Split SAE Lock Washer 5/16 SS Hex Head Cap Screw 3/8-16 x 3 Gr. 5 2-Way Hex Nut 1/4-20 Gr. A Hex Head Cap Screw 1/4-20 x 7/8 Gr. 5 Engine Assembly SS (See Sec. 1 P. 6) Roller Chain #40 77 Links Roller Chain #40 81 Links Hex Socket Set Screw 1/4-20 x 3/8 Cup 2-Way Nut 1/4-20 Gr. A Lock Nut 1/4-20 Nylon Insert SS Hiniker Decal Hiniker Decal (SS Model) Hiniker Decal Hiniker Decal (SS Model) No Step Decal Compression Spring Flat Washer 1/4 Wrt Flat Washer 1/4 SS Cable Tie, Black 8 Inch Decal Warning, Rotating Parts Latch, Rubber Clevis Pin 3/16 x 1 3/4 Cotter Pin 1/16 x 1/2 Key 1/4 x 1/4 x 1 Machine Bushing 1 1/32 x 1 1/2 x .048 Hex Head Cap Screw 1/4-20 x 3/4 Gr. 5 Hex Head Cap Screw 1/4-20 x 3/4 SS Hex Head Cap Screw 3/8-16 x 1 1/2 Gr. 5 Hex Head Cap Screw 3/8-16 x 1 1/2 SS Hex Head Cap Screw 5/16-18 x 5/8 Gr. 5 Hex Head Cap Screw 5/16-18 x 5/8 SS Sprocket 60T #40 Clutch Electric Clutch Clutch Stop SS Key 1/4 x 1/4 x 2 9/16 Long Hex Head Cap Screw 3/8 x 3/4 Gr. 5 Hex Head Cap Screw 3/8 x 3/4 SS
1 1 2 1 1 1 1 6 6 6 6 1 1 1 5 5 A/R A/R 2 4 4 1 1 1 4 8 8 2 2 1 1 1 1 8 8 3 1 2 2 2 2 1 8 8 2 2 3 3 1 1 1 1 A/R A/R
Page 3
S E C
1
S E C
HINIKER GASOLINE ENGINE SPREADER DISCHARGE CHUTE ASSEMBLY
1
DWG. NO. 6036 REF. PART NO. NUMBER 1 79202511 79202503 79202484 2 79202502 3 79202504 79202485 4 79202194 79202058 5 79202193 79202059 6 79202505 79202486 7 79202512 79202496 79202506 79202493 8 79202742 9 79202495 79202487 10 79202488 11 79202507 79202489 12 953-003-003 13 950-003-060 950-003-080 14 951-002-003 951-002-013 Page 4
DESCRIPTION
QTY.
Long Discharge Chute SS Short Discharge Chute SS Short Discharge Chute Adjustment Rod SS Rear Deflector SS Rear Deflector RH Side Deflector SS RH Side Deflector LH Side Deflector SS LH Side Deflector Inner Deflector SS Inner Deflector Long Chute Deflector SS Long Chute Deflector Short Chute Deflector SS Short Chute Deflector Pillow Block Bearing (Exposed Grease Zerk) Lower Spinner Shaft (Long) Lower Spinner Shaft (Short) Bushing Spinner Weldment SS Spinner Weldment Pin Slotted Spring 1/4 x 1 3/4 Zinc Plated Carriage Bolt 5/16-18 x 5/8 Gr. 5 Carriage Bolt 5/16-18 x 3/4 SS Whiz Lock Nut 3/8-16 Whiz Lock Nut 3/8-16 SS
1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 A/R A/R 4 4
REF. PART NO. NUMBER 15 951-005-036 951-002-011 16 79202483 17 701-35103 18 953-005-005 19 031-06010 20 950-001-117 950-001-319 21 952-002-011 952-004-062 22 951-005-089 061605 23 950-002-014 950-001-344 24 952-002-003 952-002-013 25 715-04017 26 79202518 79202516 27 79202517 28 79202716 79202715 29 035-42063 30 060954 79202387 79202388
9/16
DESCRIPTION Hex Mac Lock Nut 5/16-18 Lock Nut 5/16-18 Whiz Lock SS Bearing Shield Cotter Pin 3/32 x 1 7/8 Pin-Hair Cotter 3/32 x 1 7/8 Hex Head Cap Screw 1/4-20 x 2 Gr. 5 Hex Head Cap Screw 1/4-20 x 3/4 Gr. 5 Hex Head Cap Screw 1/4-20 x 1/2 316 SS Flat Washer 1/4 Wrt Flat Washer 1/4 SS 2-Way Lock Nut 1/4-20 Lock Nut 1/4-20 SS Whiz Lock Bolt 3/8-16 x 1 1/4 Gr. 5 Hex Head Cap Screw 3/8-16 x 1 1/4 SS Flat Washer 3/8 Flat Washer 3/8 SS Decal Warning-Moving Parts Chute Pin Long SS Chute Pin Long Chute Pin SS Chute Hinge SS Chute Hinge Cotter Pin 1/4 x 1 1/4 Lock Nut 1/4-20 Nylon Insert Short Spinner Assembly, Complete Long Spinner Assembly, Complete
QTY. A/R A/R 2 2 6 1 3 3 3 3 3 3 4 4 A/R A/R 1 1 1 1 2 2 1 2
HINIKER GASOLINE ENGINE SPREADER ELECTRICAL ASSEMBLY
1
DWG. NO. 6034 REF. NO. 1 2 3 4 5 6 7 8
PART NUMBER 36112004 79201729 38812017 38812028 38812022 38812021 367-001-014
DESCRIPTION Sander Control Box Assembly Control Box Bracket Kit 5 Foot Console Extension Wiring Harness Engine 3’ Wire Assembly Negative Battery Black Wire Assembly Positive Battery Red 8” Cable Tie See Page 2
QTY. 1 1 1 1 1 1 2 1
REF. NO. 9 10 11 12 13 14 15 16
9/16
PART NUMBER 79202397 79202084 38812023 300-14002 951-001-003 392-010-028 715-02536 38812016
S E C
DESCRIPTION
QTY.
Electrical Actuator Starter Solenoid Cable Assembly Solenoid To Starter Terminal Ring, 5/16” Hex Nut 1/4-20 Self Tapping Screw #8-32 x 1/2 Shw Head T23 Caution Battery Tag Cable, Console To Engine 23’
1 1 1 1 1 1 1 1 Page 5
S E C
HINIKER GASOLINE ENGINE SPREADER ENGINE ASSEMBLY
1
DWG. NO. 6033 REF. PART NO. NUMBER 1 79202447 79202500 2 79201997 79202501 3 79201996 4 79202397 5 50000514 6 50205013 7 702-53004 8 950-008-015 9 79202084 10 79202445 11 950-001-200 950-001-343 Page 6
REF. PART DESCRIPTION QTY. NO. NUMBER Engine Mount Plate 1 12 950-003-002 Engine Mount Plate SS 1 950-003-077 Throttle Control Bracket 1 13 951-005-036 Throttle Control Bracket SS 1 951-003-015 Throttle Control Arm 1 14 950-002-003 Throttle Control Actuator 1 950-001-334 Engine 10.5 HP 1 15 060954 Sprocket 12 Tooth, #40 1 061605 Straight Key 1/4 x 1 1 16 950-004-031 Socket Head Set Screw 1/4-20 x 1/4 2 17 951-003-011 Starter Solenoid 1 18 79201995 Muffler Deflector 1 19 950-005-027 Hex Head Cap Screw 5/16-18 x 1 1/4 Gr. 5 4 20 952-003-010 Hex Head Cap Screw 5/16-18 x 1 1/4 SS 4 952-004-062 9/16
DESCRIPTION Carriage Bolt 5/16-18 x 1/2 Gr. 5 Carriage Bolt 5/16-18 x 5/8 SS Mac Lock Nut 5/16-18 Lock Nut 5/16-18 Nylon Insert SS Whiz Lock Bolt 1/4-20 x 3/4 Hex Head Cap Screw 1/4-20 x 3/4 SS Lock Nut 1/4-20 Nylon Insert Lock Nut 1/4-20 Nylon Insert SS Machine Screw #8-32 x 3/4 Lock Nut #8-32 Nylon Insert Pin Hex Head Self Tapping Screw #8-18 x 3/8 Flat Washer 1/4 SAE Flat Washer 1/4 SS
QTY. 2 2 6 6 6 4 2 2 3 3 1 4 2 2
HINIKER GASOLINE ENGINE SPREADER GEARBOX ASSEMBLY
S E C
1
DWG. NO. 6385 REF. NO. 1 2 3 4 5 6 7 8 9 10 11
PART NUMBER 79202999 79203000 79203001 955-001-002 79203016 79203017 79203002 79203003 79203004 79203005 79203006
DESCRIPTION Body (#182734) Worm Gear (#167738) Output Cover (#183300) Grease Fitting 1/4-28 Plug (#108546) Breather (#108535) Input Shaft (#168118) Worm Thread (#167399) Input Cover (#143878) Output Shaft (#183739) Tapered Bearing Cone (#100925)
REF. QTY. NO. 1 12 1 13 1 14 1 15 5 16 1 17 1 18 1 19 1 20 1 21 2 9/16
PART NUMBER 79203007 79203008 79203009 79203015 79203014 79203010 79203011 79203012 79203013 79203024
DESCRIPTION Tapered Bearing Cone (#100927) Oil Seal (#169601) Oil Seal (#183524) Bushing (#183297) Bolt M10-1.5-16 Gr. 8.8 (#108080) Worm Key (#168113) Gear Key (#168114) Snap Ring (#139346) Bolt M8-1.25-16 Gr. 12.9 (#109686) Tapered Roller Bearing Cup (#100937)
QTY. 2 1 1 2 4 1 1 1 3 4 Page 7
S E C
HINIKER GASOLINE ENGINE SPREADER FRONT SHAFT & APRON CHAIN
1
DWG. NO. 6037 REF. NO. 1 2 3 4 Page 8
PART NUMBER 000-28670 953-001-016 000-28666 79202570
DESCRIPTION
QTY.
Coupler Link Pin Cotter Pin, 1/8 x 1/2 Long Chain Link With Pins (Repair Only) Slat With Welded Links And Pins (Repair Only)
A/R A/R A/R A/R
REF. PART NO. NUMBER 5 79202398 79202399 6 79202459
9/16
DESCRIPTION Apron Chain Assembly 8’ Hopper Apron Chain Assembly 6 1/2’ Hopper Idler Shaft Weldment
QTY. 1 1 1
HINIKER GASOLINE ENGINE SPREADER INVERTED V ASSEMBLY
Adjustable Inverted V Kit No. 79202394 6 1/2 FT. Hopper, SS Adjustable Inverted V Kit No. 79202395 8 FT. Hopper, SS REF. PART REF. PART NO. NUMBER DESCRIPTION QTY. NO. NUMBER 1 79201998 Inverted V, 8’ Hopper 1 3 950-001-089 79202566 Inverted V, 8’ Hopper SS 1 031-09103 79202135 Inverted V, 6 1/2’ Hopper 1 4 951-005-003 79202567 Inverted V, 6 1/2’ Hopper SS 1 951-002-013 2 400-15052 Strap 2 5 79202743 79202565 Strap SS 2 79202744 9/16
S E C
1
DWG. NO. 6305 DESCRIPTION Hex Head Cap Screw 3/8-16 x 3/4 Gr. 5 Hex Head Cap Screw 3/8-16 x 3/4 SS Lock Nut 3/8-16 Mac Lock Flanged Whiz Lock Nut 3/8-16 SS Inverted V Gusset Inverted V Gusset SS
QTY. 12 12 12 12 2 2 Page 9
S E C
HINIKER GASOLINE ENGINE SPREADER HINGED HOPPER GRIDS OPTION
1
79202391 Hinged Hopper Grids Kit, 6 1/2 Ft. Hopper 79202392 Hinged Hopper Grids Kit, 8 Ft. Hopper REF. PART NO. NUMBER 1 79202561 79202562 2 79202009 3 950-001-330
DESCRIPTION Screen, 8 Ft. Hopper Screen, 6 1/2 Ft. Hopper Screen Holdown Hex Head Cap Screw 5/16-18 x 3/4 SS
DWG. NO. 6015 REF. PART QTY. NO. NUMBER DESCRIPTION 2 4 951-002-011 Flanged Whiz Lock Nut 5/16-18 SS 2 5 79203146 Middle Grid Support 2 6 031-09103 Hex Head Cap Screw 3/8-16 x 3/4 SS 6 7 951-002-013 Whiz Lock Nut 3/8-16 SS
QTY. 6 1 2 2
TARP KIT
79203036 6 1/2 Ft. Spreader Tarp Assembly 79203037 8 Ft. Spreader Tarp Assembly REF. PART DESCRIPTION NO. NUMBER 1 79203033 Tarp Shurco 8’ Spreader 79203032 Tarp Shurco 6 1/2’ Spreader 2 79203031 Tarp Hook 3 79203029 LH Tarp Bracket Page 10
DWG. NO. 6460 QTY. 1 1 4 4
REF. NO. 4 5 6 7
9/16
PART NUMBER 79203030 950-003-080 952-003-012 951-002-011
DESCRIPTION RH Tarp Bracket Carriage Bolt 5/16-18 x 3/4 SS SAE Flat Washer 5/16 Inch SS Whiz Lock Nut 5/16-18 SS
QTY. 4 4 4 4
HINIKER GASOLINE ENGINE SPREADER TIE DOWN KIT
79202393 Truck Hold Down Kit, 1 1/2” Strap 79204260 Heavy Truck Hold Down Kit, 2” Strap REF. PART DESCRIPTION NO. NUMBER 1 79202400 Ratchet Tiedown 1 1/2” Strap, 11 Ft.
1
DWG. NO. 6039 REF. QTY. NO. 4
PART NUMBER 79204301
DESCRIPTION Heavy Ratchet Tiedown 2” Strap, 13 Ft.
QTY. 4
BRAKE LIGHT KIT
79202581 Brake Light Kit REF. NO. 1 2
PART NUMBER 79202091 79202092
DWG. NO. 3674 DESCRIPTION
Lamp Grommet
REF. QTY. NO. 1 3 1 9/16
PART NUMBER 79202093 79202089
S E C
DESCRIPTION Plug Brake Light Assembly
QTY. 1 Page 11
HINIKER ELECTRIC CONVEYOR SPREADER
SECTION 2 ELECTRIC CONVEYOR SPREADER COMPONENTS (MODELS 835/635) PAGE 2
HOPPER ASSEMBLY
PAGE 4
DISCHARGE CHUTE ASSEMBLY
PAGE 6
ELECTRICAL ASSEMBLY
PAGE 8
FRONT SHAFT AND APRON CHAIN ASSEMBLY
OPTIONAL EQUIPMENT
PAGE 9
HINGED HOPPER GRIDS
PAGE 9
TARP KIT
PAGE 10
VIBRATOR KIT
PAGE 11
TIE DOWN KIT
PAGE 11
BRAKE LIGHT KIT
9/16
Page 1
S E C
2
HINIKER ELECTRIC CONVEYOR SPREADER HOPPER ASSEMBLY
S E C
2
DWG. NO. 6757 Page 2
9/16
HINIKER ELECTRIC CONVEYOR SPREADER REF. PART NO. NUMBER 1 79203265 79203269 2 79202459 3 061937 4 79203270 5 79202405 6 79202406 7 950-001-346 8 061910 9 79202398 79202399 10 79203272 11 79203273 12 79202458 13 79203274 14 79202566 79202567 15 061605 16 953-003-029 17 367-001-014 18 79203275 19 79202744 20 79202565 21 031-09103 22 79203276 23 951-002-013 24 950-003-082 25 950-003-080 26 79201694 27 061923 28 79204094 29 79203277 30 720-02123 31 720-02125
DESCRIPTION
QTY.
Electric Sander Weldment, 8 Ft 1 Electric Sander Weldment, 6 1/2 Ft 1 Idler Weldment 1 Hex Nut 5/8-11 SS 2 Drive Shaft Weldment 1 2-Bolt Flange Bearing 206-18 1 Take Up Bearing 205-16 2 Hex Head Cap Screw 5/8-11 x 6 Full Thread SS 2 Hex Nut 3/8-16 SS A/R 8 Ft Apron Chain Assembly (See Sec. 2 P. 8) 1 6 1/2 Ft Apron Chain Assembly (See Sec. 2 P. 8) 1 Stiffener 1 Spinner Clevis, LH 1 Front Wiper 1 Spinner Clevis, RH 1 Inverted V 8 Ft SS 1 Inverted V 6 1/2 Ft SS 1 Nut 1/4-20 SS Nylon Lock Waxed 6 Spring Pin 5/32 x 1 1/4 1 Plastic Cable Tie 3/16 x 8 Black 5 Inverted V Extension 2 Inverted V Gusset SS 2 Strap 2 Hex Head Cap Screw 3/8-16 x 3/4 SS A/R Deflector 1 Flanged Whiz Lock Nut 3/8-16 SS A/R Carriage Bolt 3/8-16 x 3/4 SS 8 Carriage Bolt 5/16-18 x 3/4 SS 2 Chain Wiper 1 Hex Nut 1/2-13 SS 2 Decal Hiniker 2 Drive Motor, Electric Spreader 1 Clevis Bracket 2 Base Bracket Hood Latch 2
REF. NO. 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65
9/16
PART NUMBER 950-003-067 953-002-039 720-02126 79203278 109953 720-02128 36716025 36716002 061916 38812038 79203279 950-001-344 79203280 79203281 79203282 79203283 79203284 950-006-002 79204093 79203285 950-001-334 033-29011 952-004-062 061917 950-001-351 951-002-011 950-001-288 953-005-001 060854 79203772 951-003-001 950-001-341 061917 952-003-012
DESCRIPTION
QTY.
Carriage Bolt 3/8-16 x 1 SS 7 Clevis Pin 3/16 x 1 3/4 2 Latch, Rubber 2 Key 1/4 x 4 11/16 1 Rivet-Pop 3/16 x 1/4 Stainless OEDH 8 Cotter Pin 1/16 x 1/2 ZP 2 Nylon Lanyard 8” 1 Dust Cap 1 3/8 Flat Washer SAE SS A/R Drive Motor Stub Cable 1 Decal, Do Not Power Wash 1 Hex Head Cap Screw 3/8-16 x 1 1/4 SS 6 Gearbox, Electric Spreader 1 Cover Support 1 Cover Weldment SS, Electric 1 Gearbox Mount, Electric Spreader 1 Snap Bushing 1 1/2 x 1 5/16 1 Hex Head Shoulder Bolt 5/16-18 x 5/8, 1/2 x 5/32 2 Decal Hiniker 1 Spinner Rod 1 Hex Head Cap Screw 1/4-20 x 3/4 SS 6 3/8 Split Lock Washer SS A/R Washer-Flat 1/4 SS 5/8 OD x 9/32 ID 6 Lock Washer 5/16 SS 10 Hex Head Cap Screw M8-1.25 x 20 SS 10 Whiz Lock Nut 5/16-18 SS 2 Hex Head Cap Screw 1/2-13 x 1 SS 2 Pin-Hair Cotter 1/8 x 2 3/8 1 Pin 1/8 x 3/4 Cotter 1 O-Ring BUNA-N-046 1 Nut-Nylon Insert 5/16-18 2 Hex Head Cap Screw 5/16-18 x 1/2 SS 2 Lock Washer 5/16 Inch SS 2 Flat Washer 5/16 Inch SAE SS 6
Page 3
S E C
2
HINIKER ELECTRIC CONVEYOR SPREADER DISCHARGE CHUTE ASSEMBLY
S E C
2
DWG. NO. 6758 Page 4
9/16
HINIKER ELECTRIC CONVEYOR SPREADER REF. PART NO. NUMBER 1 79203311 79203294 2 79203295 3 79203318 4 79203312 79203296 5 79203297 6 79202507 7 79203298 8 79203313 79203299 9 061916 10 950-003-077 11 031-09103 12 061910 13 950-001-344 14 061605 15 79202483 16 79203300 17 79203301 18 702-53002 19 79203302 20 79203303 21 79203304 22 79202518 23 79202517 24 81006090 25 953-005-005 26 79203284
DESCRIPTION Rear Panel, Long Spinner Rear Panel, Short Spinner 2-Bolt Pillow Block Bearing 3/4 Bore Electric Motor, 12V, 1/3 Hp, 56C Spinner Shaft, Long Spinner Shaft, Short Spinner Motor Cover Spinner Weld SS Motor Top Inner Deflector, Long Inner Deflector, Short 3/8 Flat Washer SAE SS Carriage Bolt 5/16-18 x 5/8 SS Hex Head Cap Screw 3/8-16 x 3/4 SS Hex Nut 3/8-16 SS Hex Head Cap Screw 3/8-16 x 1 1/4 SS Nut 1/4-20 SS Nylon Lock Waxed Bearing Shield Motor Shield Spinner Drive Guard Key 3/16 x 1 Sprocket 40B9, 5/8 Bore Grommet, Spinner Front Deflector Chute Pin Long Chute Pin Chain #40RC Spinner 33P SS Pin-Hair Cotter 3/32 x 1 7/8 Snap Bushing 1 1/2 x 1 5/16
QTY. 1 1 A/R 1 1 1 1 1 1 1 1 A/R 16 A/R A/R 4 10 2 1 1 1 1 2 1 1 1 1 2 1
REF. NO. 27 28 29 30 31 32 33 34
9/16
35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
PART NUMBER 035-42063 71504138 79203306 367-001-014 79203279 79203307 79203308 79203314 79203309 79203310 952-004-062 951-002-011 950-001-319 031-06010 203-50000 79202742 921-001-145 81005983 060954 033-29011 951-002-013 79204302 38472327 38400028 38400034 36716025 79204253 79203292 79203293
DESCRIPTION
QTY.
Cotter Pin 1/4 x 1 1/4 Decal Warning, Rotating Parts Spinner Pivot Plastic Cable Tie 3/16 x 8 Black Do Not Power Wash Decal Bottom Motor Cover Wire Cover Spinner Body, Long Spinner Body, Short Sprocket 40B20, 3/4 Bore Washer-Flat 1/4 SS 5/8 OD x 9/32 ID Lock Nut 5/16-18 Whiz Lock SS Hex Head Cap Screw 1/4-20 x 1/2 316 SS Hex Head Cap Screw 1/4-20 x 2 Gr 5 Zerk 1/4 28 NPT 45 Degree Pillow Block Bearing 204-12Gb (Long Chute Only) Plastic Cable Tie .083 x 24 #40 Connecting Link SS Lock Nut 1/4-20 3/8 Inch Lock Washer SS Lock Nut 3/8-16 SS Male Dust Cover Assembly Connector Metri-Pack 480 Secondary Lock Metri-Pack 480 Seal Plug 480 Nylon Lanyard 8” Shaft Seal 5/8 Short Spinner Assembly Complete Long Spinner Assembly Complete
1 1 2 A/R 1 1 1 1 1 1 7 16 10 1 A/R 1 1 1 2 A/R A/R 1 1 1 2 1 1
Page 5
S E C
2
HINIKER ELECTRIC CONVEYOR SPREADER ELECTRICAL ASSEMBLY
S E C
2
DWG. NO. 6759 Page 6
9/16
HINIKER ELECTRIC CONVEYOR SPREADER REF. PART NO. NUMBER 1 36012000 2 38812031 38812042 3 79203318 4 38812030 5 38812038 6 79203277 7 36716002 8 36716025 9 367-001-014 10 38812029 11 39207038 12 39207037 13 951-002-011 14 38813012 15 952-004-008
DESCRIPTION Electric Spreader Controller 25 Ft Power Cable Spinner Motor 10 Ft Power Cable Spinner Motor Electric Motor Assembly, Spinner Power Cable Drive Motor 25 Ft Drive Motor Stub Cable Drive Motor Electric Spreader Dust Cap Nylon Lanyard 8” Cable Tie, Black 3/16 x 8 Cable Battery Power 12 Ft Fuse Holder Fuse 100 Amp Whiz Lock Nut 5/16-18 SS Cable, Solenoid External Lock Washer 1/4
QTY. 1 1 A/R 1 1 1 1 A/R A/R A/R 1 1 1 2 1 2
REF. NO. 16 17 18 19 20 21 22 23 24 25 26 27 28 29
9/16
PART NUMBER 79203334 952-004-062 950-001-319 950-002-003 951-002-001 39107001 79204302 79204303 38472327 38400028 38400034 38400029 79203322 38812032 38812041
DESCRIPTION Controller Mount Bracket Flat Washer 1/4 Inch SS Hex Head Cap Screw 1/4-20 x 1/2 SS Whiz Lock Bolt 1/4-20 x 3/4 Whiz Lock Nut 1/4-20 Foam Grommet 4” Long Male Dust Cover Assembly Female Dust Cover Assembly Connector Metri-Pack 480 Secondary Lock 480 Seal Plug 480 Connector Metri-Pack 480 Vibrator 12V Vibrator Motor Power Cable, 25 Ft. Vibrator Motor Power Cable, 10 Ft.
QTY. 1 2 2 2 2 1 2 1 2 3 6 1 1 1 A/R
Page 7
S E C
2
HINIKER ELECTRIC CONVEYOR SPREADER FRONT SHAFT & APRON CHAIN
S E C
2
DWG. NO. 6037 REF. NO. 1 2 3 4 Page 8
PART NUMBER 000-28670 953-001-016 000-28666 79202570
DESCRIPTION
QTY.
Coupler Link Pin Cotter Pin, 1/8 x 1/2 Long Chain Link With Pins (Repair Only) Slat With Welded Links And Pins (Repair Only)
A/R A/R A/R A/R
REF. PART NO. NUMBER 5 79202398 79202399 6 79202459
9/16
DESCRIPTION Apron Chain Assembly 8’ Hopper Apron Chain Assembly 6 1/2’ Hopper Idler Shaft Weldment
QTY. 1 1 1
HINIKER ELECTRIC CONVEYOR SPREADER HINGED HOPPER GRIDS OPTION
S E C
2
79202391 Hinged Hopper Grids Kit, 6 1/2 Ft. Hopper 79202392 Hinged Hopper Grids Kit, 8 Ft. Hopper REF. PART NO. NUMBER 1 79202561 79202562 2 79202009 3 950-001-330
DESCRIPTION Screen, 8 Ft. Hopper Screen, 6 1/2 Ft. Hopper Screen Holdown Hex Head Cap Screw 5/16-18 x 3/4 SS
DWG. NO. 6015 REF. PART QTY. NO. NUMBER DESCRIPTION 2 4 951-002-011 Flanged Whiz Lock Nut 5/16-18 SS 2 5 79203146 Middle Grid Support 2 6 031-09103 Hex Head Cap Screw 3/8-16 x 3/4 SS 6 7 951-002-013 Whiz Lock Nut 3/8-16 SS
QTY. 6 1 2 2
TARP KIT
79203036 6 1/2 Ft. Spreader Tarp Assembly 79203037 8 Ft. Spreader Tarp Assembly REF. PART DESCRIPTION NO. NUMBER 1 79203033 Tarp Shurco 8’ Spreader 79203032 Tarp Shurco 6 1/2’ Spreader 2 79203031 Tarp Hook 3 79203029 LH Tarp Bracket
DWG. NO. 6460 QTY. 1 1 4 4
REF. NO. 4 5 6 7
9/16
PART NUMBER 79203030 950-003-080 952-003-012 951-002-011
DESCRIPTION RH Tarp Bracket Carriage Bolt 5/16-18 x 3/4 SS SAE Flat Washer 5/16 Inch SS Whiz Lock Nut 5/16-18 SS
QTY. 4 4 4 4 Page 9
HINIKER ELECTRIC CONVEYOR SPREADER VIBRATOR KIT 12V
S E C
2
DWG. NO. 6760
79203317 Vibrator 12V Kit REF. PART NO. NUMBER 1 79203322 2 38812032 38812041 Page 10
DESCRIPTION Vibrator 12V Z200 Vibrator Motor Power Cable 25 Ft. Vibrator Motor Power Cable 10 Ft.
REF. PART QTY. NO. NUMBER DESCRIPTION 1 3 950-001-344 Hex Head Cap Screw 3/8-16 x 1 1/4 SS 1 4 033-29011 Lock Washer 3/8 Inch SS A/R 9/16
QTY. 4 4
HINIKER ELECTRIC CONVEYOR SPREADER TIE DOWN KIT
S E C
2
79202393 Truck Hold Down Kit, 1 1/2” Strap 79204260 Heavy Truck Hold Down Kit, 2” Strap REF. PART DESCRIPTION NO. NUMBER 1 79202400 Ratchet Tiedown 1 1/2” Strap, 11 Ft.
DWG. NO. 6039 REF. QTY. NO. 4
PART NUMBER 79204301
DESCRIPTION Heavy Ratchet Tiedown 2” Strap, 13 Ft.
QTY. 4
BRAKE LIGHT KIT
79202581 Brake Light Kit REF. NO. 1 2
PART NUMBER 79202091 79202092
DWG. NO. 3674 DESCRIPTION
Lamp Grommet
REF. QTY. NO. 1 3 1 9/16
PART NUMBER 79202093 79202089
DESCRIPTION Plug Brake Light Assembly
QTY. 1 Page 11
HINIKER ELECTRIC AUGER SPREADER
SECTION 3
ELECTRIC AUGER SPREADER COMPONENTS PAGE 2
HOPPER ASSEMBLY MODEL 775
PAGE 4
HOPPER ASSEMBLY MODEL 975/955
PAGE 6
DISCHARGE CHUTE ASSEMBLY
PAGE 8
ELECTRICAL ASSEMBLY
OPTIONAL EQUIPMENT
PAGE 10
TARP KIT
PAGE 11
TIE DOWN KIT
PAGE 11
BRAKE LIGHT KIT
9/16
Page 1
S E C
3
HINIKER ELECTRIC AUGER SPREADER 775 HOPPER ASSEMBLY
S E C
3
DWG. NO. 7203 Page 2
9/16
HINIKER ELECTRIC AUGER SPREADER REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
PART NUMBER 79204026 79203280 79203277 79204028 79204029 79204030 79204031 79204032 79204033 79204034 79204035 79204036 79202075 79204037 79204038 79204039 79204040 950-003-082 951-002-013 950-001-344 951-002-011 950-003-077 79203284 79204041 79203278 79202405 79204047 061916 031-09103 060854 953-005-001
DESCRIPTION Hopper Weldment SS Gearbox Drive Motor Bearing Mount, Rear Motor Mount Inverted V Inverted V Extension Inverted V Cross Spinner Hinge, RH Spinner Hinge, LH Auger Weldment Inverted V Hanger Bearing Shield Inverted V Rear Spinner Rod Cover Front Cover Carriage Bolt 3/8-16 x 3/4 SS Flange Whiz Lock Nut 3/8-16 SS Hex Head Cap Screw 3/8-16 x 1 1/4 SS Whiz Lock Nut 5/16-18 SS Carriage Bolt 5/16-18 x 5/8 SS Snap Bushing 1 1/2 x 1 5/16 Cover Key 1/4 x 4 11/16 2-Bolt Flange Bearing 206-18 Pillow Block Bearing 205-16 Flat Washer 3/8 SAE SS Hex Head Cap Screw 3/8-16 x 3/4 SS Pin 1/8 x 3/4 Cotter Pin-Hair Cotter 1/8 x 2 3/8
QTY. 1 1 1 1 1 1 2 2 1 1 1 2 2 1 1 1 1 A/R A/R 12 A/R A/R 2 1 1 1 1 A/R A/R 1 1
REF. NO. 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62
9/16
PART NUMBER 71505170 79203259 79203322 950-001-286 79204045 950-001-351 952-003-012 367-001-014 79202009 79204042 950-001-330 79204094 000-24063 79202316 79204043 79204093 36716025 79204044 061917 952-002-013 033-29011 79203146 953-003-029 203-51251 79203772 79203279 38812038 36716002 79204138 952-002-021 79202736
DESCRIPTION Decal Warning Decal Grease Vibrator 12V Z200 Hex Head Cap Screw 3/8-16 x 1 SS Backup Washer Hex Head Cap Screw M8-1.25 x 20 SS Washer 5/16 SAE SS Plastic Cable Tie 3/16 x 8 Black Screen Hold Down Grid Hex Head Cap Screw 5/16-18 x 3/4 SS Decal, Hiniker Lock Nut Grease Hose 27 1/2” Long Screen Hold Down Outer Decal, Hiniker Nylon Lanyard 8” Danger Decal, Auger Lock Washer 5/16 SS Flat Washer 3/8 Standard SS Lock Washer 3/8 Inch SS Middle Grid Support Spring Pin 5/32 x 1 1/4 45° Adapter 1/4-28 x 1/8 NPT O-Ring BUNA-N-046 Do Not Power Wash Decal Drive Motor Stub Cable Dust Cap Inverted V, Split Flat Washer 7/16 SS Grease Line 15” Long
QTY. 1 2 1 1 1 6 A/R A/R 2 2 14 2 2 1 4 1 1 2 6 A/R 9 1 1 2 1 1 1 1 2 4 1
Page 3
S E C
3
HINIKER ELECTRIC AUGER SPREADER 975/955 HOPPER ASSEMBLY
S E C
3
DWG. NO. 7367 Page 4
9/16
HINIKER ELECTRIC AUGER SPREADER REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
PART NUMBER 79204240 79203280 79203277 79204028 79204029 79204242 71505170 79203259 79204033 79204034 79204246 79204036 79202075 79203322 79204038 79204039 79204040 950-003-082 951-002-013 950-001-344 951-002-011 950-003-077 79203284 79204041 79203278 79202405 79204047 061916 031-09103 60854 953-005-001
DESCRIPTION Hopper Weldment Gearbox Drive Motor Bearing Mount, Rear Motor Mount Inverted V, Split Decal Warning Decal Grease Spinner Hinge, RH Spinner Hinge, LH Auger Weldment, Lg Inverted V Hanger Bearing Shield Vibrator 12V Z200 Spinner Rod Cover Front Cover Carriage Bolt 3/8-16 x 3/4 SS Flanged Whiz Lock Nut 3/8-16 SS Hex Head Cap Screw 3/8-16 x 1 1/4 SS Flanged Whiz Lock Nut 5/16-18 SS Carriage Bolt 5/16-18 x 5/8 SS Snap Bushing 1 1/2 x 1 5/16 Cover Key 1/4 x 4 11/16 2-Bolt Flange Bearing 206-18 Pillow Block Bearing 205-16 Flat Washer 3/8 SAE SS Hex Head Cap Screw 3/8-16 x 3/4 SS Cotter Pin 1/8 x 3/4 Cotter Pin-Hair 1/8 x 2 3/8
QTY. 1 1 1 1 1 2 1 2 1 1 1 2 2 1 1 1 1 52 64 12 34 20 5 1 1 1 1 8 8 1 1
REF. NO. 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61
9/16
PART NUMBER 79204250 79204248 79202736 38812032 950-002-286 950-001-351 79204045 367-001-014 79202009 79204243 950-001-330 79204094 000-24063 79202316 79204043 79204093 952-003-012 79204044 061917 952-002-013 033-29011 79204249 953-003-029 203-51251 79203772 79203279 38812038 36716002 36716025 952-002-021
DESCRIPTION Hopper Ext Cross Brace Hopper Ext Front/Back Grease Hose 15” Vibrator Motor Power Wire Hex Head Cap Screw 3/8-16 x 1 SS Hex Head Cap Screw M8-1.25 x 20 SS Backup Washer Plastic Cable Tie 3/16 x 8 Black Screen Hold Down Grid Hex Head Cap Screw 5/16-18 x 3/4 SS Decal, Hiniker Lock Nut Grease Hose 27 1/2 Screen Hold Down Outer Decal Hiniker Washer 5/16 SAE SS Danger Decal, Auger Lock Washer 5/16 SS Flat Washer 3/8 Standard SS Lock Washer 3/8 Inch SS Hopper Ext Side Spring Pin 5/32 x 1 1/4 45° Adapter 1/4-28 x 1/8 NPT O-Ring Buna-N-046 Do Not Power Wash Decal Drive Motor Stub Cable Dust Cap Nylon Lanyard 8” Washer 7/16 Inch SS
QTY. 3 2 1 1 1 6 1 A/R 2 2 14 2 2 1 4 1 A/R 2 6 22 9 2 1 2 1 1 1 1 1 36
Page 5
S E C
3
HINIKER ELECTRIC AUGER SPREADER DISCHARGE CHUTE ASSEMBLY
S E C
3
DWG. NO. 7205 Page 6
9/16
HINIKER ELECTRIC AUGER SPREADER REF. PART NO. NUMBER 1 79203311 79203294 2 79203295 3 79203318 4 79203312 79203296 5 79203297 6 79202507 7 79203298 8 79203313 79203299 9 061916 10 950-003-077 11 031-09103 12 061910 13 950-001-344 14 061605 15 79202483 16 79203300 17 79203301 18 702-53002 19 79203302 20 79203303 21 79203304 22 79202518 23 79202517 24 81006090 25 953-005-005 26 79203284
DESCRIPTION Rear Panel, Long Spinner Rear Panel, Short Spinner 2-Bolt Pillow Block Bearing 3/4 Bore Electric Motor, 12V, 1/3 Hp, 56C Spinner Shaft, Long Spinner Shaft, Short Spinner Motor Cover Spinner Weldment SS Motor Top Inner Deflector, Long Inner Deflector, Short 3/8 Flat Washer SAE SS Carriage Bolt 5/16-18 x 5/8 SS Hex Head Cap Screw 3/8-16 x 3/4 SS Hex Nut 3/8-16 SS Hex Head Cap Screw 3/8-16 x 1 1/4 SS Nylon Waxed Lock Nut 1/4-20 SS Bearing Shield Motor Shield Spinner Drive Guard Key 3/16 x 1 Sprocket 40B9, 5/8 Bore Grommet, Spinner Front Deflector Chute Pin Long Chute Pin Chain #40RC Spinner 33P SS Hair Pin Cotter 3/32 x 1 7/8 Snap Bushing 1 1/2 x 1 5/16
QTY. 1 1 A/R 1 1 1 1 1 1 1 1 A/R 16 A/R A/R 4 10 2 1 1 1 1 2 1 1 1 1 2 1
REF. NO. 27 28 29 30 31 32 33 34
9/16
35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
PART NUMBER 035-42063 71504138 79203306 367-001-014 79203279 79203307 79203308 79203314 79203309 79203310 952-004-062 951-002-011 950-001-319 031-06010 203-50000 79202742 921-001-145 81005983 060954 033-29011 951-002-013 79204302 38472327 38400028 38400034 36716025 79204253 79203292 79203293
DESCRIPTION
QTY.
Cotter Pin 1/4 x 1 1/4 Plated Decal Warning, Rotating Parts Spinner Pivot Plastic Cable Tie 3/16 x 8 Black Do Not Power Wash Decal Bottom Motor Cover Wire Cover Spinner Body, Long Spinner Body, Short Sprocket 40B20, 3/4 Bore Flat Washer 1/4 Inch SS 5/8 OD x 9/32 ID Whiz Lock Nut 5/16-18 SS Hex Head Cap Screw 1/4-20 x 1/2 316 SS Hex Head Cap Screw 1/4-20 x 2 Gr. 5 Zerk 1/4-28 NPT 45° Pillow Block Bearing 204-12GB (Long Chute Only) Plastic Cable Tie .083 x 24 #40 Connecting Link SS Lock Nut 1/4-20 Lock Washer 3/8 Inch SS Lock Nut 3/8-16 SS Male Dust Cover Assembly Connector Metri-Pack 480 Secondary Lock Metri-Pack 480 Seal Plug Nylon Lanyard 8” Shaft Seal 5/8 Short Spinner Assembly Complete Long Spinner Assembly Complete
1 1 2 A/R 1 1 1 1 1 1 7 16 10 1 A/R 1 1 1 2 A/R A/R 1 1 1 2 1 1
Page 7
S E C
3
HINIKER ELECTRIC AUGER SPREADER ELECTRICAL ASSEMBLY
S E C
3
DWG. NO. 6759 Page 8
9/16
HINIKER ELECTRIC AUGER SPREADER REF. PART NO. NUMBER 1 36012000 2 38812031 38812042 3 79203318 4 38812030 5 38812038 6 79203277 7 36716002 8 36716025 9 367-001-014 10 38812029 11 39207038 12 39207037 13 951-002-011 14 38813012 15 952-004-008
DESCRIPTION Electric Spreader Controller 25 Ft Power Cable Spinner Motor 10 Ft Power Cable Spinner Motor Electric Motor Assembly, Spinner Power Cable Drive Motor 25 Ft Drive Motor Stub Cable Drive Motor Electric Spreader Dust Cap Nylon Lanyard 8” Cable Tie, Black 3/16 x 8 Cable Battery Power 12 Ft Fuse Holder Fuse 100 Amp Whiz Lock Nut 5/16-18 SS Cable, Solenoid External Lock Washer 1/4
QTY. 1 1 A/R 1 1 1 1 A/R A/R A/R 1 1 1 2 1 2
REF. NO. 16 17 18 19 20 21 22 23 24 25 26 27 28 29
9/16
PART NUMBER 79203334 952-004-062 950-001-319 950-002-003 951-002-001 39107001 79204302 79204303 38472327 38400028 38400034 38400029 79203322 38812032 38812041
DESCRIPTION Controller Mount Bracket Flat Washer 1/4 Inch SS Hex Head Cap Screw 1/4-20 x 1/2 SS Whiz Lock Bolt 1/4-20 x 3/4 Whiz Lock Nut 1/4-20 Foam Grommet 4” Long Male Dust Cover Assembly Female Dust Cover Assembly Connector Metri-Pack 480 Secondary Lock 480 Seal Plug 480 Connector Metri-Pack 480 Vibrator 12V Vibrator Motor Power Cable, 25 Ft. Vibrator Motor Power Cable, 10 Ft.
QTY. 1 2 2 2 2 1 2 1 2 3 6 1 1 1 A/R
Page 9
S E C
3
HINIKER ELECTRIC AUGER SPREADER TARP KIT
S E C
3
79204259 Tarp 79204298 Tarp REF. PART NO. NUMBER 1 79204299 79204300 Page 10
Kit 955/975 Auger Spreader Kit 775 Auger Spreader DESCRIPTION Tarp 775 Spreader Tarp 955/975 Spreader
DWG. NO. 7381 REF. PART QTY. NO. NUMBER 1 2 79204090 1 9/16
DESCRIPTION S-Hook Sander Tarp
QTY. 12
HINIKER ELECTRIC AUGER SPREADER TIE DOWN KIT
S E C
3
79202393 Truck Hold Down Kit, 1 1/2” Strap 79204260 Heavy Truck Hold Down Kit, 2” Strap REF. PART DESCRIPTION NO. NUMBER 1 79202400 Ratchet Tiedown 1 1/2” Strap, 11 Ft.
DWG. NO. 6039 REF. QTY. NO. 4
PART NUMBER 79204301
DESCRIPTION Heavy Ratchet Tiedown 2” Strap, 13 Ft.
QTY. 4
BRAKE LIGHT KIT
79202581 Brake Light Kit REF. NO. 1 2
PART NUMBER 79202091 79202092
DWG. NO. 3674 DESCRIPTION
Lamp Grommet
REF. QTY. NO. 1 3 1 9/16
PART NUMBER 79202093 79202089
DESCRIPTION Plug Brake Light Assembly
QTY. 1 Page 11
HINIKER RECEIVER HITCH SPREADER
SECTION 4 RECEIVER HITCH SPREADER PAGE 2
10 CUBIC FT. HOPPER ASSEMBLY (MODEL 1000)
PAGE 4
6 CUBIC FT. HOPPER ASSEMBLY (MODEL 600)
PAGE 6
ELECTRICAL ASSEMBLY
PAGE 7
SWING AWAY HOPPER KIT
PAGE 8
VIBRATOR KIT
PAGE 9
UTV MOUNT KIT
PAGE 10
SKID STEER MOUNT KIT RECEIVER SPREADER
PAGE 11
CAT I 3-POINT HITCH MOUNT KIT
PAGE 12
TRAILER ASSEMBLY RECEIVER HITCH SPREADER
PAGE 13
TIE DOWN STRAP
PAGE 14
HOPPER STAND KIT
9/16
S E C
4
Page 1
HINIKER RECEIVER HITCH SPREADER 10 CUBIC FT. SS HOPPER ASSEMBLY
S E C
4
DWG. NO. 7307 Page 2
9/16
HINIKER RECEIVER HITCH SPREADER REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
PART NUMBER 79204153 79204197 954-002-009 79204233 951-003-001 950-003-007 79204190 79204159 79204178 79204182 79204199 79204093 79204186 79204262 79202483 950-001-095 951-002-011 950-003-077 061916 950-001-319 952-004-062 950-001-287 79204157 79204156 79204171 79204195 79204193 061917 950-001-330 951-003-009 79204170
DESCRIPTION Frame Weldment Hopper Assembly 10 Cubic Ft. Rivet-Pop 3/16 x 1/8 Stainless OEDH Top Deflector Front Lock Nut 5/16-18 Carriage Bolt 3/8-16 x 1 1/4 Hitch Pin 5/8 Inch Diameter Auger Cover Auger Trough Adjustable Angle Brace Cross Brace 10 Cubic Ft. Decal Hiniker Bottom Panel (Not For Brush) Bottom Panel (For Brush) Bearing Shield Hex Head Cap Screw 5/16-18 x 1 3/4 Gr. 5 Lock Nut 5/16-18 Whiz Lock SS Carriage Bolt 5/16-18 x 5/8 SS Flat Washer 3/8 SAE Stainless Hex Head Cap Screw 1/4-20 X 1/2 SS Flat Washer 1/4 Stainless Hex Head Cap Screw 5/16-18 x 1 SS Bottom Cover Receiver Mount Weldment 2 Inch Front Panel Motor Enclosure Cover Assembly 10 Cubic Ft. Hopper Grid 10 Cubic Ft. Lock Washer 5/16 Inch SS Hex Head Cap Screw 5/16-18 x 3/4 SS Hex Nut 1/2 Nylon Insert #5 Auger/Spinner Weldment
QTY. 1 1 A/R 1 1 1 1 1 1 2 2 1 2 2 2 1 A/R 18 8 2 2 4 1 1 1 1 1 3 6 7 1
REF. NO. 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
9/16
PART NUMBER 950-003-028 952-003-004 79204162 79204163 79204179 951-005-102 79204160 720-02399 79204158 950-003-029 951-001-005 950-003-085 952-002-022 952-001-007 951-003-015 79204223 79204200 952-002-003 79204254 79204303 38400029 38400028 38400034 36716025 367-001-014 79204261 79204263 951-003-018 950-003-071 79204183
DESCRIPTION Carriage Bolt 1/2-13 x 1 1/4 Gr. 5 Flat Washer 1/2 SAE Washer 5/16 Inch SS Grommet 5/16 I.D. 11/16 O.D. Compression Spring Wing Nut 5/16-18 SS Top Deflector Cable Clamp 3/8 Deflector Carriage Bolt 3/8-16 x 1 Hex Nut 3/8-16 Carriage Bolt 5/16-18 x 1 1/2 SS Flat Washer 5/16 Inch Standard SS Lock Washer Split 3/8 Inch Lock Nut 5/16-18 Nylon Insert SS 1/4 HP Right Angle Gear Motor Assembly Ratchet Strap 6 Ft. Flat Washer 3/8 Shaft Seal 3/4 Female Cover Assembly Connector Metri-Pack 480 Male Secondary Lock Metri-Pack 480 Seal Plug 480 Cavity Nylon Lanyard 8” Plastic Cable Tie 3/8 x 8 Black Inverted Auger Disc Brush Brush Clip Lock Nut #10-24 SS Carriage Bolt #10-24 x 1/2 SS Latch Assembly
QTY. 7 7 16 1 2 2 1 1 1 3 5 2 17 4 7 1 2 4 1 1 1 1 2 1 A/R 2 6 6 6 2
Page 3
S E C
4
HINIKER RECEIVER HITCH SPREADER 6 CUBIC FT. SS HOPPER ASSEMBLY
S E C
4
DWG. NO. 7306 Page 4
9/16
HINIKER RECEIVER HITCH SPREADER REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
PART NUMBER 79204153 79204187 954-002-009 79204233 951-003-001 950-003-007 79204190 79204159 79204178 79204182 79204189 79204093 79204186 79204262 79202483 950-001-095 951-002-011 950-003-077 061916 950-001-319 952-004-062 950-001-287 79204157 79204156 79204171 79204185 79204161 061917 950-001-330 951-003-009
DESCRIPTION Frame Weldment Hopper Assembly 6 Cubic Ft. Pop Rivet 3/16 x 1/8 SS OEDH Top Deflector Front Lock Nut 5/16-18 Carriage Bolt 3/8-16 x 1 1/4 Hitch Pin 5/8 Diameter Auger Cover Auger Trough Adjustable Angle Brace Cross Brace 6 Cubic Ft. Decal Hiniker Bottom Panel (Not For Brush) Bottom Panel (For Brush) Bearing Shield Hex Head Cap Screw 5/16-18 x 1 3/4 Gr. 5 Lock Nut 5/16-18 Whiz Lock SS Carriage Bolt 5/16-18 x 5/8 SS Flat Washer 3/8 SAE SS Hex Head Cap Screw 1/4-20 x 1/2 SS Flat Washer 1/4 SS Hex Head Cap Screw 5/16-18 x 1 SS Bottom Cover Receiver Mount Weldment 2 Inch Front Panel Motor Enclosure Cover Assembly 6 Cubic Ft. Hopper Grid 6 Cubic Ft. Lock Washer 5/16 Inch SS Hex Head Cap Screw 5/16-18 x 3/4 SS Hex Nut 1/2 Nylon Insert #5
QTY. 1 1 A/R 1 1 1 1 1 1 2 2 1 2 2 2 1 A/R 18 8 2 2 4 1 1 1 1 1 3 6 7
REF. NO. 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
9/16
PART NUMBER 79204170 950-003-028 952-003-004 79204162 79204163 79204179 951-005-102 79204160 720-02399 79204158 950-003-029 951-001-005 950-003-085 952-002-022 952-001-007 951-003-015 79204223 950-003-071 952-002-003 79204254 79204303 38400029 38400028 38400034 36716025 367-001-014 79204261 79204263 951-003-018 79204183
DESCRIPTION Auger/Spinner Weldment Carriage Bolt 1/2-13 x 1 1/4 Gr. 5 Flat Washer 1/2 SAE Washer 5/16 Inch SS Grommet 5/16 I.D. 11/16 O.D. Compression Spring Wing Nut 5/16-18 SS Top Deflector Cable Clamp 3/8 Deflector Carriage Bolt 3/8-16 x 1 Hex Nut 3/8-16 Carriage Bolt 5/16-18 x 1 1/2 SS Flat Washer 5/16 Inch Standard SS Lock Washer Split 3/8 Inch Lock Nut 5/16-18 Nylon Insert SS 1/4 HP Right Angle Gear Motor Assembly Carriage Bolt #10-24 x 1/2 SS Flat Washer 3/8 Shaft Seal 3/4 Female Cover Assembly Connector Metri-Pack 480 Male Secondary Lock Metri-Pack 480 Seal Plug 480 Cavity Nylon Lanyard 8” Plastic Cable Tie 3/8 x 8 Black Inverted Auger Disc Brush Brush Clip Lock Nut #10-24 SS Latch Assembly
QTY. 1 7 7 16 1 2 2 1 1 1 3 5 2 17 4 7 1 6 4 1 1 1 1 2 1 A/R 2 6 6 2
Page 5
S E C
4
HINIKER RECEIVER HITCH SPREADER ELECTRICAL ASSEMBLY
S E C
4
DWG. NO. 7304 REF. PART NO. NUMBER 1 79204232 2 38812031 38812042 3 79204223 4 38812039 5 38812032 38812041 6 79204222 7 79204302 Page 6
DESCRIPTION Controller Assembly Receiver Spreader Power Cable Drive Motor, 25 Ft. Power Cable Drive Motor, 10 Ft. 1/4 HP RA Gear Motor Assembly Power Cable Receiver Hitch Spreader Vibrator Motor Power Cable, 25 Ft. Vibrator Motor Extension Cable, 10 Ft. Vibrator 12V Z-80 Male Cover Assembly
REF. PART QTY. NO. NUMBER 1 8 79204303 1 9 38472327 10 38400028 1 11 38400034 1 12 36716025 1 13 367-001-014 14 38400029 1 15 38812043 1 9/16
DESCRIPTION Female Cover Assembly Connector Metri-Pack 480 Female Secondary Lock Metri-Pack 480 Seal Plug 480 Nylon Lanyard 8” Plastic Cable Tie 3/16 x 8 Black Connector Metri-Pack 480 Male Vibrator Motor Cable, In Cab
QTY. 2 1 3 6 3 5 2 1
HINIKER RECEIVER HITCH SPREADER SWING AWAY HOPPER KIT
S E C
4
79204139 Swing Away Hopper Kit REF. NO. 1 2 3 4 5 6 7
PART NUMBER 79204203 79204204 951-005-044 950-001-164 79204205 950-001-111 79204206
DESCRIPTION Pivot Weldment Receiver Hitch Pivot Weldment Spreader Side Lock Nut 5/8-11 2 Way Hex Head Cap Screw 5/8-11 x 3 1/2 Gr. 5 Hitch Pin 5/8 x 4 1/4 Hex Head Cap Screw 1/2-13 x 1 1/4 Gr. 5 Decal Caution
DWG. NO. 7305 QTY. 1 1 1 1 1 1 1
REF. NO. 8 9 10 11 12 13 14
9/16
PART NUMBER 951-003-009 952-003-004 950-003-028 79204190 031-06113 952-002-003 951-005-003
DESCRIPTION Hex Nut 1/2 Nylon Insert #5 Washer Flat 1/2 SAE Carriage Bolt 1/2-13 x 1 1/4 Hitch Pin 5/8 x 4 Hex Head Cap Screw 3/8-16 x 3 Gr. 5 Flat Washer 3/8 Inch Lock Nut 3/8-16 Mac
QTY. 6 6 5 1 1 A/R 1 Page 7
HINIKER RECEIVER HITCH SPREADER VIBRATOR KIT
S E C
4
79204141 Receiver Hitch Spreader Vibrator Kit REF. PART NO. NUMBER 1 38812032 38812041 2 79204222 3 79204224 4 950-001-314 5 950-003-080 Page 8
DESCRIPTION Vibrator Motor Power Cable, 25 Ft. Vibrator Motor Extension Cable, 10 Ft. Vibrator 12V Z-80 Vibrator Mount Plate Hex Head Cap Screw 3/8-16 x 1 1/2 SS Carriage Bolt 5/16-18 x 3/4 SS
DWG. NO. 7273 QTY. 1 1 2 4 2
REF. NO. 6 7 8 9 10
9/16
PART NUMBER 951-002-011 951-003-013 952-002-013 367-001-014 38812043
DESCRIPTION Lock Nut 5/16-18 Whiz Lock SS Lock Nut 3/8-16 SS Nylon Insert Flat Washer 3/8 Inch SS Plastic Cable Tie Vibrator Adapter Cable, In Cab
QTY. 2 4 4 6 1
HINIKER RECEIVER HITCH SPREADER UTV RECEIVER HITCH SPREADER MOUNT KIT
S E C
4
79204258 UTV Mount Kit REF. NO. 1 2 3 4 5 6 7
PART NUMBER 79204293 79204292 79204291 79204290 950-001-089 950-001-106 950-003-029
DWG. NO. 7361 DESCRIPTION
UTV Mounting Rail RH UTV Mounting Rail LH UTV Mounting Bar Inner UTV Spacer Mounting Bar Hex Head Cap Screw 3/8-16 x 3/4 Gr. 5 Hex Head Cap Screw 3/8-16 x 1 1/4 Gr. 5 Carriage Bolt 3/8-16 x 1 Gr. 5
QTY. 1 1 1 1 6 6 8
REF. NO. 8 9 10 11 12 13
9/16
PART NUMBER 951-003-002 952-002-003 950-003-080 951-005-051 79204162 951-002-011
DESCRIPTION
QTY.
Lock Nut 3/8-16 Nylon Washer 3/8 Inch Standard Carriage Bolt 5/16-18 x 3/4 SS Lock Nut 3/8-16, 2-Way Square Washer 5/16 Inch SS Whiz Lock Nut 5/16-18 SS
14 26 4 6 A/R A/R Page 9
HINIKER RECEIVER HITCH SPREADER SKID STEER ATTACHMENT RECEIVER SPREADER
S E C
4
79204255 Skid Steer Mount Kit REF. NO. 1 2 3 4
PART NUMBER 79204296 25012719 79204289 950-001-125
Page 10
DESCRIPTION Spacer Ring 4” Diameter Mount Plate Weldment Skid Steer Attach Weldment Hex Head Cap Screw 1/2-13 x 1 1/2 Gr. 5
DWG. NO. 7362 QTY. 2 1 1 2
REF. NO. 5 6 7 8
9/16
PART NUMBER 10304 79204295 950-001-087 951-005-044
DESCRIPTION Lock Nut 1/2-13 Washer 4” Diameter Hex Head Cap Screw 5/8-11 x 1 1/2 Gr. 5 Lock Nut 2-Way 5/8-11
QTY. 2 1 1 1
HINIKER RECEIVER HITCH SPREADER 3-POINT ATTACHMENT RECEIVER SPREADER
S E C
4
79204256 Cat 1 3-Point Hitch Mount Kit REF. PART NO. NUMBER 1 36360402 2 30002234 3 79204264
DESCRIPTION Top Link Pin Cat 1 Lower Hitch Pin Cat 1 3-Point Attachment Weldment Spreader
DWG. NO. 7363 QTY. 1 2 1
REF. PART DESCRIPTION NO. NUMBER 4 81004481 Lynch Pin 5 952-001-008 Lock Washer 7/8 Inch 6 951-001-021 Hex Nut 7/8-14
9/16
QTY. 3 A/R A/R Page 11
HINIKER RECEIVER HITCH SPREADER TRAILER ASSEMBLY RECEIVER SPREADER
S E C
4
79204257 Trailer Mount Kit Off-Highway Vehicles REF. NO. 1 2 3 4 5
PART NUMBER 950-001-153 033-12013 951-003-010 79204190 953-005-003
Page 12
DESCRIPTION Hex Head Cap Screw 3/4-10 x 7 1/2 Gr. 5 Flat Washer SAE 3/4 Inch Hex Lock Nut, Nylon Insert 3/4-10 Hitch Pin 5/8 Diameter Hair Pin Cotter .148 x 2 3/4
DWG. NO. 7364 QTY. 2 4 2 1 1
REF. NO. 6 7 8 9 10
9/16
PART NUMBER 950-001-105 951-005-003 79204276 79204281 79204275
DESCRIPTION Hex Head Cap Screw 3/8-16 x 1 Gr. 5 Nut-Lock Mac 3/8-16 Tire Assembly Lower Frame Weldment Upper Frame Weldment
QTY. 2 2 2 1 1
HINIKER RECEIVER HITCH SPREADER RATCHET TIEDOWN STRAP
S E C
4
DWG. NO. 7309 REF. PART NO. NUMBER 1 79204200
DESCRIPTION Ratchet Tiedown Strap, 1 1/2” Strap, 6 Ft.
REF. QTY. NO. 2 9/16
PART NUMBER
DESCRIPTION
QTY. Page 13
HINIKER RECEIVER HITCH SPREADER HOPPER STAND KIT
S E C
4
79204140 Hopper Stand Kit REF. PART NO. NUMBER 1 79204229 2 79204231 3 031-06112 Page 14
DWG. NO. 7281 DESCRIPTION
Hopper Stand Base Weldment Hopper Stand Top Weldment Hex Head Cap Screw 3/8-16 x 2 3/4 Gr. 5
QTY. 1 1 2
REF. PART NO. NUMBER 4 952-002-003 5 951-005-003
9/16
DESCRIPTION Flat Washer 3/8 Standard Lock Nut 3/8-16 Mac Loc
QTY. 4 2
