Transcript
QUICK START GUIDE
Metrotech’s HL10 is a small, easy to operate water leak locator. Its outstanding acoustic properties enable it to find even tiny leaks.
The filter settings allow the user to adapt perfectly to individual tasks and suppress interfering ambient sound.
Built-in LED Microphone socket
Parameter
Value
Display
LED-display
Resolution
10 statges
Data Storage
Last value memory
Filter settings 3 predefined filters
0 - 4000 Hz, 0 - 540 Hz, 540 - 4000 Hz
Volume Control
10 stages
LED Light
Built-in LED
Battery
2 x 1.5 V AA Batteries
Protection class
IP 54 (amplifier) IP 67 (PAM B-2)
Operation time
50 h
Operation temperature
-4 °F … +158 °F
Dimensions HL 10 (H x W x D)
7.28 x 3.54 x 2.36 in.
Weight
7 oz.
Headphone socket Connect the headphones:
Scope of Delivery: Microphone PAM B-2, 10 ft. cable P/N PAM-B-2 Extension rod and tip P/N VSTT-1 Magnet P/N 110030010 Tripod P/N 820000881 and magnetic base P/N 208010119
Noise cancellation headphones P/N 183053
Application Support: T/Free : +1-800-624-6210 Tel : +1-408-454-7159 Fax : +1-408-743-5597 Email :
[email protected]
Connect the microphone:
Push the microphone plug tightly into the socket and aline the marks on the plug and socket.
Hard carrying case P/N 11544
Optional: 1. 2. 3.
Vivax-Metrotech Corporation 3251 Olcott Street, Santa Clara, CA 95054, USA Website : www.vivax-metrotech.com Sales & Sales Support: T/Free : +1-800-446-3392 Tel : +1-408-734-1400 Fax : +1-408-734-1415 Email :
[email protected]
Push the headphone plug tightly into the receiver socket of the HL 10. Turn on the ambient noise cancellation mode directly on the headphone, if needed.
Carbiner hook P/N 12095 and velcro strap P/N 180103
David Clark headphones. Ground Micorphone (GM) 80 with cable, handle, tripod. Additional extension rod.
Service & Repairs: T/Free : +1-800-638-7682 Tel : +1-408-962-9990 Fax : +1-408-734-1799 Email :
[email protected] All Other Department: T/Free : +1-877-330-1647 Tel : +1-408-734-3880 Fax : +1-408-962-9993
CanadaVivax Canada Inc. 400 Esna Park Drive, Unit 17, Markham, Ontario, L3R 3K2, Canada Tel : +1-289-846-3010 Website : www.vivax-metrotech.com Email :
[email protected] EuropeSebaKMT Seba Dynatronic Mess-und Ortungstechnik GmbH Dr.-Herbert-Iann-Str. 6, 96148 Baunach, Germany. Tel : +49-9544-680 Fax : +49-9544-2273 Website : www.sebakmt.com Email :
[email protected]
Australasia SebaKMT AUS Unit 1, 176 South Creek Road, Cromer NSW 2009, Australia Tel : +61-2-9972-9244 Fax : +61-2-9972-9433 Website : www.sebakmtaus.com Email :
[email protected] [email protected] Leidi Utility Supply (Shanghai) Ltd. Rm405 3rd Building No. 641, Tianshan Rd, Shanghai, China 200336 Tel : +86-21-5187-3880 Fax : +86-21-5168-5880 Website : www.leidi.com Email :
[email protected]
Attach Velcro Here
HL 10™ Acoustic Water Leak Locator
QUICK START GUIDE
Set-up
Insert enclosed battery into the receiver. Turn the reciever On: Push the power button 1 for 2 seconds to turn on.
Modes of operation: Press button 1 to switch between two important operation modes:
3
2
•
Mute Mode – No signal is heard with the headphones. Mute is useful before you move the microphone. The last sound level is frozen and the LED filter display 2 blinks.
•
Normal Mode – The measurement begins with the amplified sound heard through the headphones. The measured sound level is also indicated by LED’s 3 .
5 4 1
Filter-settings: Press button 4 to change filter settings. Filter-LED 2 indicates actual setting: left LED
0…
540 Hz
center LED
0…
4000 Hz
right LED
540 ... 4000 Hz
low frequencies low and high frequencies high frequencies
Volume control: The volume and the sensitivity of the handheld amplifier is adjusted with buttons 5 . While listening to the ground, look for ambient noises. Readjust volume and sensitivity if needed during your leak survey. The adjusted resolution is indicated on the LED-display 1 . In addition, you can use the built in volume control in the headphone cord.
4
Recommended measuring-sequence: 1. Mount PAM B-2 or Ground Microphone (GM) 80 to the handheld device. 2. Put microphone onto the first measuring point. 3. Turn the device on. 4. Select filter setting sound (0 … 4000 Hz, center LED). 5. Measure the sound level by watching the LED’s and listen to the sound through the headset. 6. Select operation mode “mute” and the microphone will turn off.
LED light: Press button 4 to turn light on. The light switches off as soon as you release it.
Charge condition and battery replacement Low batteries are indicated by flashing filter-LEDs 2 . However, operation time of about 8 hours will continue after. To change batteries, open the cover of the device by using a cross tip screwdriver. Replace the batteries with a 2 AA, 1.5V. Please make sure the batteries are installed correctly into the device. Close the cover and tighten the screw appropriately. Warranty: One year. Specifications subject to change without notice. ISO 9001: 2000 Certified. © 2008 Metrotech. All Rights Reserved. P/N R12160
Hands Free Carry: Insert the velcro strap through your belt, then secure the HL10 through the velcro strap. Fasten the carabiner hook through your belt loop and insert the microphone cable wire.
www.vivax-metrotech.com
